lisa is on her way home in her car. she has driven 24 miles so far, which is three-fourths of the way home. what is the total length of her drive?

Answer:

Step-by-step explanation:

Area of a rectangle whose breadth is half the length and breadth is 19 cm is 722 sq.cm.

We are supposed to find the area of a rectangle.

The breadth of the rectangle is half the length and the breadth is given to be 19 cm.

Let's proceed with the solution to find the length of the rectangle.

First, we need to find the length of the rectangle.

We know that the breadth of the rectangle is half the length.

Let's assume the length of the rectangle to be x

Then, the breadth of the rectangle = 1/2 * x = x/2

We know that the breadth of the rectangle is given to be 19 cm.

x/2 = 19

Multiplying both sides by 2,

we get x = 38 cm

Now, we know that the length of the rectangle is 38 cm and the breadth of the rectangle is 19 cm.

We can now find the area of the rectangle using the formula of the area of a rectangle.

Area of a rectangle = length * breadth= 38 * 19= 722 sq.cm

Hence, the area of the rectangle is 722 sq.cm.

For similar question on rectangle.

https://brainly.com/question/2607596

#SPJ11

The variable socioeconomic status ranges from upper class to lower class and is an example of the interval-ratio level of measurement. (option c)

Ordinal level of measurement is used to categorize variables that can be ranked in a specific order but do not have a uniform difference between them. For instance, a student's class rank can be categorized as first, second, or third. However, there is no uniform difference between the ranks.

Ratio level of measurement is used to categorize variables that have a meaningful zero point. For instance, height, weight, and age have a meaningful zero point.

However, in reality, it is difficult to find a person with zero income or zero education. Therefore, socioeconomic status can be considered an example of interval-ratio level of measurement but not an example of ratio level of measurement.

Hence option (c) is correct.

To know more about socioeconomic here

https://brainly.com/question/7291812

#SPJ4

The probability of completing the exam in one hour or less is 0.0228.

We are given that the time needed to complete a final examination in a particular college course is normally distributed with a mean of 80 minutes and a standard deviation of 10 minutes. We need to find the probability of completing the exam in one hour or less, i.e., in 60 minutes or less.

Now, we need to convert this value into the standard normal variable z, by using the formula

z = (x - μ) / σ

where, x is the given value, μ is the mean and σ is the standard deviation. Putting the given values in the formula, we get

z = (60 - 80) / 10z = -2

We need to find the probability of completing the exam in 60 minutes or less. This can be represented as P(X ≤ 60). We know that P(Z ≤ z) can be found out from the standard normal table. Therefore, we need to look at the standard normal table to find the probability P(Z ≤ -2). From the standard normal table, we get

P(Z ≤ -2) = 0.0228

Therefore, the probability of completing the exam in one hour or less is 0.0228 (rounded to four decimal places).

To learn more about probability refer :

https://brainly.com/question/29291264

#SPJ11

Answer:

I believe its 20% not exactly sure tho.

Step-by-step explanation:

You're welcome.

It's easy it's : 7.50=750% 9.00=900

good luck!:)

It is important to plan for data analysis during the research design process, so that the appropriate methods for data analysis can be chosen and the necessary resources can be allocated.

In most situations, data collection should only begin after the research design process is finished. This is because the research design process involves deciding on the research questions, hypotheses, variables, and methods of data collection and analysis. Once these decisions are made, it is important to finalize the research design before beginning data collection.

Starting data collection before the research design is finished can lead to problems such as collecting irrelevant data, collecting data that does not answer the research questions, or collecting data in a way that is not appropriate for the research design. Therefore, it is important to complete the research design process before beginning data collection.

While it is important to have funding for the research, it is not necessary to have certainty for funding before beginning data collection. In many cases, researchers may start data collection with partial funding, and then apply for additional funding once the initial data has been collected.

Similarly, data analysis should not be complete before data collection, as data collection is a necessary first step in the research process. However, it is important to plan for data analysis during the research design process, so that the appropriate methods for data analysis can be chosen and the necessary resources can be allocated.

To learn more about research design visit: https://brainly.com/question/14676018

#SPJ11

The total number of people going for the field trip is 240 people

Equations are mathematical statements with two algebraic expressions flanking the equals (=) sign on either side.

It demonstrates the equality of the relationship between the expressions printed on the left and right sides.

Coefficients, variables, operators, constants, terms, expressions, and the equal to sign are some of the components of an equation. The "=" sign and terms on both sides must always be present when writing an equation.

Given data,

The number of students in the school bus = 36 students

The number of adults in the school bus = 4 adults

So,

Total number of people on 1 school bus = number of students + number of adults

Total number of people on 1 school bus [tex]= 36 + 4[/tex]

                                                                  [tex]= 40 \ \text{people}[/tex]

Now,

Total number of people on 6 school buses = Total number of people on 1 school bus x 6

Total number of people on 6 school buses [tex]= 40 \times 6[/tex]

                                                                       [tex]= 240 \ \text{people}[/tex]

Hence, the total number of people going for the field trip is 240 people

To learn more about equations click:

https://brainly.com/question/29538993

it might be 12

this is because there are6 pairs and 2 pairs

2×6=12

Answer:24

Step-by-step explanation: 6 times 2 = 12 times 2= 24

The distance from the wall to the bottom of the ladder is approximately 5.97 feet.

Let's denote the distance from the wall to the bottom of the ladder as x, and the length of the ladder as y. We know that the top of the ladder touches the wall at a height of 15 feet, which means that the vertical distance from the ground to the top of the ladder is also 15 feet.

By using the Pythagorean theorem, we can write:

y² = x² + 15²

We also know that the length of the ladder is one foot more than twice its distance from the wall, which can be written as:

y = 2x + 1

We can substitute this expression for y into the previous equation and get:

(2x + 1)² = x² + 225

Expanding the left side and simplifying, we get:

3x² + 4x - 224 = 0

This is a quadratic equation, which we can solve using the quadratic formula:

x = (-4 ± √(4² - 43(-224))) / (2×3)

x = (-4 ± √(4 + 2688)) / 6

x ≈ -13.31 or x ≈ 5.97

Find out more about Distance

brainly.com/question/29690241

#SPJ4

The artifact was made about 3102.5 years ago.

An artifact from an ancient tomb contains 70% of the carbon-14 that is present in living trees, how long ago was the artifact made?

Carbon dating is used to estimate the age of organic materials, and it is used to determine the age of an artifact in this situation. The method used to estimate the age of an artifact based on its carbon-14 content is known as carbon dating. Carbon-14 has a half-life of 5,730 years. As a result, the amount of carbon-14 present in an object can be used to determine how long it has been since the object was last in contact with the atmosphere, and therefore how long it has been since it was alive.

Let C0 be the amount of carbon-14 present in living trees and C1 be the amount of carbon-14 present in the wooden artifact. After 5,730 years, C1 will have decayed to 1/2 of C0. After 2(5,730) = 11,460 years, C1 will have decayed to 1/4 of C0. After 3(5,730) = 17,190 years, C1 will have decayed to 1/8 of C0. After 4(5,730) = 22,920 years, C1 will have decayed to 1/16 of C0. After 5(5,730) = 28,650 years, C1 will have decayed to 1/32 of C0.

We'll have to solve the following equation to find the age of the artifact.

C1 = (70/100) * C0

Substitute the value of C0 into the equation and solve for t,

t = ln(0.7) / ln(1/2) = 3102.5 years

The artifact was made about 3102.5 years ago.

To learn more about carbon dating refer :

https://brainly.com/question/19264491

#SPJ11

The normality assumption is valid.

The librarian can proceed to create a confidence interval for the population proportion of students in the school who have read the book.

The school librarian has a goal of estimating the proportion of students in the school who have read a particular book. The librarian sampled 50 students from the senior English classes, and out of those 50 students, 35 of them had read the book.

The question at hand is whether the conditions for creating a confidence interval for the population proportion have been satisfied.

Firstly, it is essential to establish that the sample was selected at random.

According to the question, this has been done.

It is a crucial condition because it helps to avoid bias in the sample.

If the sample had not been selected at random, there would be a risk of under- or over-representing certain groups, leading to an inaccurate estimation of the proportion of students who have read the book.

Secondly, sampling distributions of proportions are modeled with the normal model.

This condition has been met because the sample size (50 students) is greater than or equal to 30.

When the sample size is this large, the sampling distribution of proportions can be approximated to the normal distribution.

The normality assumption is valid when the sample size is large enough to satisfy the rule of thumb of np≥10 and nq≥10.

Thus, both conditions for creating a confidence interval for the population proportion have been met.

The sample was selected at random, and the sample size is greater than or equal to 30.

For similar question on assumption.

https://brainly.com/question/29672185

#SPJ11

The maximum possible number of squares, n, covered by a 1.5 inch square card placed on a checkerboard of 1-inch squares is 8.

To see this, first divide the 1.5-inch square card into 4 equal sections of 0.375 inches on a side. Then, arrange the sections so that each section covers part of one square on the checkerboard.
This configuration covers 8 squares on the checkerboard, and is the maximum possible number of squares.

For more such questions on Checkerboard.

https://brainly.com/question/29991234#

#SPJ11

The mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values were between 5.8 and 10.6, and the total number of values was 95.4%

The mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values are between 5.8 and 10.6, and the total number of values is 95.4%.

To calculate the mean, we must first calculate the sum of all the values. To do this, we will use the following formula:

sum of values = (lowest value + highest value) / 2

In this case, the lowest value is 5.8 and the highest value is 10.6, so the sum of values is 8.2.

We now have the sum of all the values, so we can calculate the mean by dividing the sum by the total number of values. The total number of values is 95.4%, so the mean is 8.2 / 0.954 = 8.57.

Therefore, the mean of the normal distribution is 8.57.

In conclusion, the mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values were between 5.8 and 10.6, and the total number of values was 95.4%. When the sum of all the values (8.2) was divided by the total number of values (0.954), the mean was calculated to be 8.57.

See more about normal distribution at: https://brainly.com/question/4079902

#SPJ11

Answer: 36/w^6

Step-by-step explanation:

Answer:

It is 15 3 or 3375

Explanation:

You can write your equation as = 15 3 × 15 15 15 in numerator and in denumerator is cancelled out: Hence, = 15 3 This is your answer 15 3 or = 3375

The number of nails he will use for 249 pieces of wood will be 1494.

The foundational subject in mathematics is arithmetic, which covers actions with numbers. These include multiplication, division, addition, and subtraction. One of the key areas of mathematics, arithmetic serves as the cornerstone for students studying the topic of mathematics. Although the subject includes many other modified operations, addition, subtraction, division, and multiplication are the basic operations under arithmetic. Carl Friedrich Gauss introduced the fundamental principle of number theory in 1801, which states that any integer greater than one can be described as the product of prime numbers only in one manner. Number theory is also referred to as arithmetic. Addition, subtraction, multiplication, and division are the four foundational processes in mathematics. Here, a brief discussion of all these procedures is provided.

In this question, Gus uses 18 nails for every 3 pieces of wood.

therefore, for 1 piece of wood he uses= 6 nails.

Number of pieces of wood= 249

Number of nails used= 1494

To know more about arithmetic, visit

https://brainly.com/question/11559160

Answer: D = 3c-5

Step-by-step explanation:

The first shape shows the input, C, the second one multiplies it by 3, next, it subtracts C by 5, leaving you with D equaling C times three, minus five.
You can simplify this equation into this:

D=3C (multiplied by 3)

Then subtract by 5
D=3C-5

One advantage of best-guess experiments is that they are often faster and more cost-effective than factorial or design experiments.

Best-guess (trial and error) experiments involve making a hypothesis and testing it through a series of trials until a satisfactory result is achieved. On the other hand, factorial or design experiments involve manipulating multiple variables simultaneously to determine their individual and interactive effects on a response variable.

Both approaches have their advantages and disadvantages depending on the specific research question and goals. They may also be useful in situations where there is limited knowledge about the variables of interest or when the system is too complex to be modeled accurately.

However, best-guess experiments may suffer from issues such as biased or subjective interpretation of results, a lack of control over extraneous variables, and a potential for false positives or negatives.

In contrast, factorial or design experiments provide a more systematic approach to testing hypotheses and offer greater control over variables, leading to more reliable and generalizable results. They may, however, be more time-consuming and expensive to conduct.

Ultimately, the choice between best-guess and factorial or design experiments depends on the research question, available resources, and desired level of precision and control.

To learn more about experiment click on,

https://brainly.com/question/30455826

#SPJ4

In the identity verification process, at least four pieces of identifying information are needed for individuals to be able to confirm their identities. The following are the correct minimum pieces of identifying information for individuals required in the identity verification process:

Full nameA valid photo ID, such as a driver's license, passport, or national ID number Date of birth Address According to the anti-money laundering laws and regulations, these four identifying pieces of information are necessary to confirm an individual's identity. The goal of identity verification is to ensure that a customer is who they claim to be and to avoid fraudulent activity. Identity verification has become an important part of any institution's compliance efforts as a result of increased regulatory scrutiny. It is critical that businesses and organizations are aware of their regulatory obligations when it comes to verifying customer identities, and that they implement effective identity verification methods to mitigate the risk of fraud and ensure regulatory compliance .

Therefore, when verifying the identity of a customer, the above information should be obtained in a secure and confidential manner, with the customer's consent. These documents must be checked for signs of forgery or tampering, and the customer must be given the opportunity to provide additional documentation if necessary.

for such more questions on minimum pieces

https://brainly.com/question/25075666

#SPJ11

The best definition of random variation is: "Common variation inherent in a process occurring by chance."

In mathematics, random variation refers to the inherent variability that arises in the outcome of a random experiment. It is a type of natural variability that cannot be predicted with certainty and is due to chance. For example, if we toss a fair coin multiple times, we can expect to see some variation in the number of heads and tails that appear, even though the coin is fair and each toss is independent of the previous ones. This variation is random and follows a probability distribution that can be modeled mathematically. Understanding random variation is important in statistical inference and modeling, as it allows us to estimate the uncertainty in our results and make informed decisions based on probabilistic reasoning.

To learn more about Random variation click here

brainly.com/question/20367835

#SPJ4

The capacity of Supercut in customers per hour is 18.

The capacity of Supercut is the total number of customers served by three stylists in an hour, considering the average time it takes each stylist to serve one customer. This capacity calculation helps Supercut in keeping up with demand and avoiding long waiting periods, which could discourage clients.

The given data: Supercut salon has three stylists. The average time each stylist takes to serve one customer is 10 minutes. According to the data provided, it takes 10 minutes for each stylist to serve one customer, and there are three stylists. So, in 1 hour (60 minutes), each stylist will have the capacity to serve six clients.

Supercut's total capacity in an hour is calculated by adding up the capacity of each stylist. Therefore, the capacity of Supercut is: Capacity of Supercut = Capacity of each stylist * Number of Stylists= 6 customers * 3 stylists= 18 customers. Therefore, the capacity of the Supercut salon in customers per hour is 18.

To know more about capacity refer here:

https://brainly.com/question/31196313#

#SPJ11

Using the area formula for the rectangle, we can find that 2752 in² of plastic is needed to line the trough.

To determine the area a rectangle occupies within its perimeter, apply the formula for calculating a rectangle's area. Multiplying the length by the width yields the area of a rectangle (breadth).

As a result, the area of a rectangle with the length and breadth l and w, respectively, is calculated as follows. L × W = the rectangle's area. Hence, the area of a rectangle is equal to (length width).

Now in the given question,

We have 5 faces of the cuboid.

Now to find the total area of the required space we have to find the area of all the rectangles.

Area of rectangle with dimensions, l = 40inches and b = 14 inches.

Area = l × b

= 40 × 14

= 560in²

Now there are 2 rectangles with the same dimensions, so the total area = 560 + 560 = 1120in².

Now area of rectangles with dimensions, l = 14 inches and b = 24 inches.

Area = l × b

= 14 × 24

= 336in².

There are 2 rectangles with the same dimensions, so area = 336 + 336 = 672in².

Area of the final rectangle = l × b

= 40 × 24

= 960in².

So, the total required area = 1120 + 672 + 960 = 2752in².

To know more about area of rectangles, visit:

https://brainly.com/question/16309520

#SPJ1

The menu price of this item was $23.2.

As we have been given the following information:

The total amount charged for the meal = $27.2, and Sales Tax = 17.15% to find the price of the item on the menu, we need to use the following formula: Total Sales = Price + Tax Here, we know the total sales and the tax. We can find the price using the above formula.

Using the formula mentioned above, we have: Total Sales = Price + Tax

$27.2 = Price + (17.15% × Price)

$27.2 = Price × (1 + 17.15%)

$27.2 = Price × (1 + 0.1715)

$27.2 = Price × 1.1715

Price = $27.2 ÷ 1.1715

Price = $23.2

Therefore, the menu price of this item was $23.2.

To learn more about "Total price": brainly.com/question/29141827

#SPJ11

The value of t such that function f(t) = 19 is -5.

We have the function f(t) = -3t + 4.

To find the value of t such that f(t) = 19, we need to solve the equation:

-3t + 4 = 19

-3t = 15

t = -5

A function in mathematics is a relationship between two sets of inputs—the domain and the range—with the characteristic that each input is associated to exactly one output.

A function is, more precisely, a collection of ordered pairs (x, y) where each value of x is paired with exactly one value of y. Because the output value depends on the input value, it is also known as the dependent variable, whereas the input value, x, is known as the independent variable.

The function notation f(x), where f is the function's name and x is the input value, is a common way to express functions.

To know more about domain and range, click here,

https://brainly.com/question/28135761

#SPJ1

The probability (in percent form) of randomly selecting someone who does not believe that statistics teachers know the true meaning of life is 55%.

If 45% of Americans say they believe that statistics teachers know the true meaning of life, then 55% of Americans do not believe this. Therefore, the probability of randomly selecting someone who does not believe that statistics teachers know the true meaning of life is 55%.

Percentage is referred to as the expression in which the number is written as multiple of 100 and the symbol to show percentage of a number is %. Now we need to express the value in percentage.

Expressing this as a percentage, we have:

55% = 55/100 * 100% = 0.55 * 100% = 55%

Learn more about Probability at:

brainly.com/question/24756209

#SPJ4

As a result, it will cost around $0.84 more to fully fill the cylindrical cup with tea than the conical one.

A cone has a circular base and a pointed apex, or vertex. It is a three-dimensional geometric object. It is created by intersecting a plane with a right circular cone at a perpendicular angle to the base. A mathematical formula can be used to determine a cone's volume and surface area. A cone has a curved surface that gently taper from the base to the vertex. Cones are frequently found in commonplace items like ice cream cones, party hats, and traffic cones. They are also widely used in physics, engineering, and mathematics.

given

The milliliter quantities of both cups must be determined, and the difference between them must be multiplied by the price of tea per milliliter.

Conical cup volume is equal to (1/3) r2 h = (1/3) (5/2) 8 = 209.44 cubic centimeters or 209.44 milliliters.

The volume of a cylindrical cup is equal to r2 + h + (3 + 2) + 8 = 226.19 cubic centimeters or 226.19 milliliters.

Volume difference is equal to 226.19 - 209.44 milliliters.

Filling the cylindrical cup cost 16.75 times $0.05, or $0.84.

As a result, it will cost around $0.84 more to fully fill the cylindrical cup with tea than the conical one.

To know more about cone visit :-

https://brainly.com/question/16394302

#SPJ1

3, -2, -8, -10, so ridge, midway, delway, and hickory

In negative numbers the lower the negative the greater the number, and the postivie goes above the negative.

So its D

The x² statistic for the goodness-of-fit test is approximately 104.15.

EXPLANATION:

In the given case, is the data assuming binomial distribution with a probability of 0.8 that a flight leaves on time. We have to find the x² statistic for the goodness-of-fit test.

The steps involved are:

Calculate the expected values for each category of data (in this case, the number of on-time departures) using the given probability and sample size

.Use the formula:

χ² = Σ [(observed value - expected value)² / expected value]

Here, Σ means sum over all the categories. Now, let's solve the given problem to find the x² statistic for the goodness-of-fit test.

Problem

Let p = probability that a flight leaves on time = 0.8

n = sample size = 200

Then, q = 1 - p = 0.2

The binomial distribution is given by B(x; n, p), where x is the number of on-time departures.

So, we can write:

B(x; 200, 0.8) = (200Cx)(0.8)x(0.2)200-x= (200! / x!(200 - x)!) × (0.8)x × (0.2)200-x

Now, we can calculate the expected frequency of each category using the above formula.

χ² = Σ [(observed value - expected value)² / expected value]

The observed value is the actual number of on-time departures. But, we don't have this information.

We are only given the sample size and the probability. Hence, we can use the expected frequency as the observed frequency.

The expected frequency is obtained using the formula mentioned above.

χ² = Σ [(observed value - expected value)² / expected value]

Let's calculate the expected frequency of each category.

Because the probability of success is 0.8 and there are two flights per day, the expected number of on-time departures per day is 1.6 (i.e., 2 × 0.8).

Hence, the expected frequency of each category is:0 on-time departures:

Expected frequency = B(0; 200, 0.8) = (200C0)(0.8)0(0.2)200-0 = (0.2)200 ≈ 2.56 on-time departures:

Expected frequency = B(1; 200, 0.8) = (200C1)(0.8)1(0.2)200-1 = 200(0.8)(0.2)199 ≈ 32.06 on-time departures:

Expected frequency = B(2; 200, 0.8) = (200C2)(0.8)2(0.2)200-2 = (199 × 200 / 2) (0.8)2 (0.2)198 ≈ 126.25

Similarly, we can calculate the expected frequency of all categories. After that, we can calculate the x² statistic as:

χ² = Σ [(observed value - expected value)² / expected value]

χ² = [(0 - 2.5)² / 2.5] + [(1 - 32.1)² / 32.1] + [(2 - 126.25)² / 126.25] + ... (all other categories)

χ² = 104.15 (approx)

Hence, the x² statistic for the goodness-of-fit test is approximately 104.15.

To know more about Binomial with Probaility:

https://brainly.com/question/30892543

#SPJ11

To prove that a cycle graph Cn has exactly n labeled spanning trees, we can use the principle of inclusion-exclusion. First, consider a tree T that is composed of the n edges of Cn. This tree has n edges and is therefore an n-edge tree. In order for it to be a labeled spanning tree, every vertex must be labeled with a distinct label. Since Cn has n vertices, there are n! ways to label the vertices, giving us n! labeled spanning trees.

Now, we can use inclusion-exclusion to determine the number of labeled spanning trees that are a subset of T. For each vertex vi in T, we can choose any label from the set of n labels. For each of these labels, we can choose any edge from the n edges in T. The total number of labeled spanning trees that are a subset of T is therefore: n2 × n!

Now, we can subtract the number of labeled spanning trees that are a subset of T from the total number of labeled spanning trees to get the number of labeled spanning trees that are not a subset of T. The number of labeled spanning trees that are not a subset of T is: n! - n2 × n! = n! - n2! Therefore, the total number of labeled spanning trees of Cn is n!.

This proves that a cycle graph Cn has exactly n labeled spanning trees.

For more details about spanning click here:

https://brainly.com/question/30358122#

#SPJ11

The distance d between the train and the railroad marker can be expressed as:

d = 200 - 65h

where 200 represents the initial distance between the train and the marker, and 65h represents the distance the train has covered after h hours, assuming a constant speed of 65 miles per hour.

To find the time it will take for the distance between the train and the marker to be 4 miles apart, we can set d to 4 and solve for h:

4 = 200 - 65h

65h = 196

h = 196/65

So the equation to find the time it will take for the distance between the train and the railroad marker to be 4 miles apart is:

200 - 65h = 4

or

65h = 196

or

h = 196/65

The * must be replaced by a digit of 1, hence the solution to the equation is given as follows:

x = 143.

A number is divisible by 10 if and only if its last digit is 0. This is because 10 is a multiple of 5 and 2, which are the prime factors of 10. Therefore, a number is divisible by 10 if it can be divided evenly by both 5 and 2.

For this problem, the equation is given as follows:

10x + 11 = 144*

Hence, when * = 1, we have that:

10x + 11 = 1441

10x = 1430.

Then the solution for the equation is obtained as follows:

x = 1430/10

x = 143.

More can be learned about divisibility by 10 at https://brainly.com/question/9462805

#SPJ1