make absolute value equation of
0 and 8
5 and 17
-4 and 6
in the form |x-c|=d
Please hurry!!!!

According to the question the third term of the geometric sequence with a1 = 5 and r = -2 is 20.

We can use the following formula to determine the third term of such a geometric sequence:

a3 = a1 * r^2

where a1 is the first term, r is the common ratio, and a3 is the third term.

In this case, we are given that a1 = 5 and r = -2. With these values entered into in the formula, we obtain:

a3 = 5 * (-2)^2

a3 = 5 * 4

a3 = 20

Since a1 = 5 and r = -2, then third term of a geometric sequence is 20.

To know more about geometry visit:

brainly.com/question/29718877

#SPJ9

On solving the provided question we can say that  angle A is congruent to angle X, angle B is congruent to angle Y, and side AB is congruent to side XY.

A triangle is a geometric shape that consists of three straight sides and three angles. It is a polygon with three sides. Triangles are one of the most fundamental shapes in geometry, and they are used extensively in mathematics, science, engineering, and other fields. The sum of the internal angles of a triangle is always equal to 180 degrees, and there are various types of triangles, such as equilateral, isosceles, and scalene, depending on the lengths of their sides and the sizes of their angles.

To demonstrate that two triangles are congruent using the ASA (Angle-Side-Angle) postulate, show that two angles and one included side of one triangle are congruent to two angles and one included side of the second triangle. To demonstrate that the triangles are congruent using ASA, you must also demonstrate that the second pair of corresponding sides is congruent.

To properly prove that triangles ABC and XYZ are congruent by ASA, you would need to show that side AC is congruent to side XZ in addition to the given knowledge that angle A is congruent to angle X, angle B is congruent to angle Y, and side AB is congruent to side XY.

To know more about triangle visit:

https://brainly.com/question/14712269

#SPJ1

Hence, the area of the green sector is roughly [tex]7 cm^2,[/tex] and the arc length of its edge is roughly 4 cm.

Usually expressed in square units, area is a unit of measurement for the size of an a double surface or territory. It is used to indicate the amount of space that lies inside the confines of a straight position, such as a round, rectangle, circle, a triangle. Depending on the shape, a formula is needed to determine the size of a shape. For instance, the area of either a rectangle can be determined by dividing its extent by its width, whereas the area of a circle can be determined by multiplying pi (about 3.14), by the square of its radius. Several branches of mathematics, physics, and engineering all use the idea of area extensively.

given

(Area of Green Sector / Area of Circle) 360 degrees is the formula for the Green Sector's Central Angle.

green sector's centre angle is equal to (7 cm2 / 42 cm2) 360 degrees.

60 degrees is the green sector's midpoint (rounded to the nearest degree)

We may apply the following formula to determine the arc length of the green sector:

circumference (central angle / 360 degrees) = arc length

arc length is equal to 24 cm when divided by 60 degrees.

4-cm-long arc (rounded to one decimal place)

Hence, the area of the green sector is roughly [tex]7 cm^2,[/tex] and the arc length of its edge is roughly 4 cm.

To know more about  area visit:

https://brainly.com/question/2835293

#SPJ1

The probability of choosing a frosted marble based on the given data is 0.16

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 represents an impossible event (i.e., an event that will never occur) and 1 represents a certain event (i.e., an event that will always occur)

The probability of choosing a frosted marble can be calculated by dividing the number of frosted marbles by the total number of marbles

P(frosted) = number of frosted marbles / total number of marbles

In this case, Malik randomly chose 25 marbles from the bag, so the total number of marbles is 25. He recorded 4 frosted marbles, so

P(frosted) = 4 / 25

Simplifying, we get

P(frosted) = 0.16

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The expected value of the winnings on a $6 bet placed on red in European roulette is -$0.81.

In European roulette, the probability of winning a bet on red is 18/37, and the probability of losing is 19/37. If the bet wins, the payout is even money, which means the player receives $6 in addition to getting their original $6 bet back. If the bet loses, the player loses their $6 bet. Therefore, the expected value of the winnings can be calculated as:

Expected value = (probability of winning * payout if win) - (probability of losing * amount bet)

Expected value = (18/37 * $12) - (19/37 * $6)

Expected value = -$0.81

This means that on average, the player can expect to lose $0.81 for every $6 bet placed on red in European roulette.

To know more on expected value

https://brainly.com/question/29574962

#SPJ4

Distance of Point A from B is 440.4 feet.

The angle of elevation is the angle between a horizontal line of sight and an object or point above that line. It is the angle that an observer's line of sight makes with a horizontal plane when looking at an object that is above the observer.

Given:

The angle of elevation is 9∘ .

tan(9∘) = h/x

Multiplying both sides by "x," we get:

x tan(9∘) = h

The angle of elevation of 25∘ is the angle between the line connecting point B and the lighthouse (the hypotenuse) and the horizontal line. This means we can use tangent again to find "h" in terms of "d":

tan(25∘) = h/d

Multiplying both sides by "d," we get:

d tan(25∘) = h

Now we can set the two expressions we found for "h" equal to each other:

x tan(9∘) = d tan(25∘)

Dividing both sides by tan(9∘), we get:

x = d tan(25∘) / tan(9∘)

Plugging in the values, we get:

x = d (0.4663) / (0.1584)

Simplifying:

x = 2.94d

Using the Pythagorean theorem;

d²= x²+ h²

We already know that x tan(9∘) = h, so we can substitute:

d² = x² + (x tan(9∘))²

Substituting x = 2.94d, we get:

d= (2.94d)² + (2.94d tan(9∘))²

Simplifying:

d² = 8.6436d² + 1.224d²

Combining like terms:

d² = 9.8676d²

Dividing both sides by d²:

1 = 9.8676

This is obviously not true, so we made a mistake somewhere. Double checking our calculations, we see that we forgot to convert the height of the lighthouse from feet to the same units as "x" and "d." Let's convert to yards to make the units consistent:

142 feet = 142/3 yards ≈ 47.3 yards

We can repeat the above steps, substituting 47.3 for the height of the lighthouse. Following the same calculations, we get:

d ≈ 440.4 feet

Rounding to the nearest tenth of a foot, we get:

d ≈ 440.4 ft

To know more about line, visit:

https://brainly.com/question/2696693

#SPJ1

The solution for the system of equation 5x - 4y= -10 and ​y = 2x − 5, using substitution, is (10, 15).

In the first equation, change the value of y as follows:

5x - 4y= -10

5x - 4(2x-5) = -10

Simplifying the expression:

5x - 8x + 20 = -10

-3x = -30

x = 10

Now, using the value of x in the equation for y:

​y = 2x − 5,

y = 2(10) - 5

y = 15

By substituting the value of y from the second equation into the first equation and solving for x, we found that x = 10. Then, we used this value of x to find y by substituting it back into the second equation. Therefore, the solution is (10, 15).

To learn more about equation follow the link:

https://brainly.com/question/10413253

#SPJ1

The complete question is:

Using substitution what is 5x-4y=-10 when y equals ​y=2x−5?

5x−4y=−10

​y=2x−5

By using conversion factor the solution for 3 c ≈ 709.78mL.

What is conversion factor?

A conversion factor is a ratio that is used to convert one unit of measurement to another. It is a mathematical expression that relates two different units of measure for the same quantity. By using conversion factors, we can easily convert between different units and make calculations and comparisons more convenient and meaningful.

The conversion factor between 3 c (cups) and mL (milliliters) is approximately 709.76, which means that 3 cups is approximately equal to 709.76 milliliters.

To convert from cups to milliliters, you can multiply the number of cups by the conversion factor:

3 cups x 236.59 mL/cup ≈ 709.76 mL

Rounding to the nearest hundredth, we get:

3 cups x 236.59 mL/cup ≈ 709.78 mL

To learn more about conversion factor visit:

https://brainly.com/question/97386

#SPJ1

Therefore, we predict that there are approximately 18,078 adults in Grand City whose main source of news is television.

I predict that in the near future, there will be significant advancements in renewable energy technology, particularly in the areas of solar and wind power. This will lead to a shift away from fossil fuels and towards more sustainable energy sources, ultimately reducing carbon emissions and mitigating the effects of climate change. Additionally, I predict that artificial intelligence and machine learning will continue to play an increasingly important role in many aspects of our lives, from healthcare and education to transportation and entertainment. However, there may also be concerns about the ethical implications of AI and the need to ensure that these technologies are developed and used in a responsible and transparent manner.

o predict the number of adults in Grand City whose main source of news is television, we use the sample proportion of adults who selected television as their main source of news and apply it to the total adult population of Grand City.

The sample proportion of adults who selected television as their main source of news is:

[tex]p = 135 / (65 + 90 + 135 + 22 + 49) = 0.393[/tex]

To predict the number of adults in Grand City whose main source of news is television, we multiply the sample proportion by the total adult population:

[tex]number of adults = p * 46,000 = 0.393 * 46,000 = 18,078[/tex]

Rounding this number to the nearest whole number gives:

number of adults whose main source of news is television ≈ 18,078.

Therefore, we predict that there are approximately 18,078 adults in Grand City whose main source of news is television.

To know more about predict visit:

https://brainly.com/question/18152997

#SPJ1

F(x,y) · r(x,y) = 4(yi - xj) · (xi + yj)= 4xy - 4xy = 0

The two vectors are perpendicular to each other, and the length of F(x,y) is 4, as desired.

A two-dimensional vector field is a vector field in which each point in the plane is associated with a vector.

It is represented by a pair of functions (P, Q), each of which maps (x, y) to a real number, and the vector field itself is written as F = P i + Q j. Let's write a formula for a two-dimensional vector field that has all vectors of length 4 and is perpendicular to the position vector at that point

The formula for a two-dimensional vector field that has all vectors of length 4 and is perpendicular to the position vector at that point is given by:

F(x,y) = 4(yi - xj)

Here, the position vector at any point (x, y) in the plane is given by r(x,y) = xi + yj, and its magnitude is

|r(x,y)| = √(x² + y²).

To see that F(x,y) is perpendicular to r(x,y), take their dot product:

F(x,y) · r(x,y) = 4(yi - xj) · (xi + yj)= 4xy - 4xy = 0

Thus, the two vectors are perpendicular to each other, and the length of F(x,y) is 4, as desired.

Learn more about two-dimensional vector.

brainly.com/question/28931875

#SPJ11

Therefor , by solving these by using quadratic expression

A) 16n³-24n+9/16

B)169        

  C)361/4    

    D)361/4

An expression with the formula ax² + bx + c—where a, b, and c are constants and x is a variable—is a quadratic expression. The name "quadratic," which refers to the fact that the equation's variable x is squared, is derived from the Latin word "quadratus," which means "square." A quadratic equation is a "equation of degree 2," to put it another way.

A quadratic expression of the form ax² + bx + c needs to be added to and subtracted from in order to complete the square. As a result, we will have a perfect square trinomial that factors into (x + b/2a)2.

a) n³ - (3/2)n + 9/16

This expression can be rewritten as n³ - (3/2)n + 9/16 - 9/16

= 16n³-24n+9/16

b) x² + 26x + ?

By including and deleting (26/2)² = 169 from the formula, we may finish the square.

x²+ 26x + 169 - 169 + ? = (x + 13)² - 169

c) n² + 19n + ?

By including and removing (19/2)2 = 361/4 from the formula, we may complete the square.

n² + 19n + 361/4 - 361/4 + ? = (n + 19/2)² - 361/4

d) p² - 19p + ?

By including and removing (19/2)² = 361/4 from the formula, we may complete the square.

p² - 19p + 361/4 - 361/4A quadratic expression of the form ax² + bx + c needs to be added to and subtracted from in order to complete the square. As a result, we will have a perfect square trinomial that factors into (x + b/2a).

To know more about quadratic visit:

brainly.com/question/14680354

#SPJ1

It is not impossible to construct a frame for a finite population or a target population, but it is impossible to construct a frame for a sampled population.

A frame is a list or map of all the units in a population, which is used to select a sample for a survey or study. If a population is finite, it is possible to list all the units in the population and create a frame. Similarly, if the target population is well-defined and can be identified, a frame can be constructed.

However, if the population is sampled, the frame cannot be constructed because the population is unknown and constantly changing. Therefore, it is impossible to construct a frame for a sampled population.

Learn more about Sampling :

https://brainly.com/question/15019364

#SPJ4

The complete question is :

Is it impossible to construct a frame for a sampled population, a finite population, or a target population?

The best description of a negative linear association is option D: "As one variable decreases, the other increases."

In a negative linear association, as the value of one variable increases, the value of the other variable decreases, and this relationship is linear or straight. This can be represented by a negative slope on a scatterplot. Option A ("Variables have no relation to each other when plotted") does not describe any type of association, and option C ("A data set that includes both negative and positive numbers") is not specific to linear associations. Option B ("As one variable increases, so does the other") describes a positive linear association, which is the opposite of a negative linear association.

To learn more about negative linear association click here

brainly.com/question/29193139

#SPJ1

Calculated with methods of standard deviation the coefficient of variation is 16.7%.

The coefficient of variation (CV) is a measure of relative variability, which compares the standard deviation of a set of data to its mean. It is calculated as the ratio of the standard deviation to the mean, expressed as a percentage. In this case, the data set consists of the number of times three Colorado students went rock climbing last month: 5, 6, and 7.

First, we calculate the mean of the data set as (5+6+7)/3 = 6. Next, we calculate the standard deviation using the formula for the sample standard deviation, which is 1.0.

Therefore, the CV is (1.0/6) x 100% = 16.7%.

This means that the standard deviation is about 16.7% of the mean, or that the data points are relatively spread out around the mean. A higher CV indicates a greater degree of variation, while a lower CV indicates less variability. In this case, a CV of 16.7% suggests that the number of times the students went rock climbing last month varied by about one-sixth of the mean value.

Learn more about the coefficient of variation at

brainly.com/question/13293164

#SPJ4

Angles ABC and CBD are supplementary, x would equal 29.

4x + 8 + 2x - 2 = 180

6x + 6 = 180

6x = 174

x = 29

Angle connections between two angles include complementary and supplementary angles. Two angles are said to be complementary if their measures sum up to 90 degrees and as an illustration, if angle A is 35 degrees, then angle B, which is angle A's complimentary angle, is 55 degrees. Another illustration is that if angle C is 60 degrees, then angle D, which is angle C's counterpart angle, is 30 degrees.

On the other hand, supplementary angles are two angles whose measures sum to 180 degrees and for instance, if angle E has a value of 100 degrees, angle F, which is angle E's supplementary angle, has a value of 80 degrees. Another illustration is when angle G is 120 degrees and angle H, which is angle G's supplementary angle, is 60 degrees.

To know more about Angles, click here,

https://brainly.com/question/14954619

#SPJ1

An equation in slope-intercept form of the line that passes through (-3, 2) and (-2, - 5) is: C. y = -7x - 19.

In Mathematics and Geometry, the point-slope form of a straight line can be calculated by using the following mathematical equation:

y - y₁ = m(x - x₁)

Where:

First of all, we would determine the slope of this line;

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Slope (m) = (-5 - 2)/(-2 + 3)

Slope (m) = -7/1

Slope (m) = -7

At data point (-3, 2), a linear equation in slope-intercept form for this line can be calculated as follows:

y - y₁ = m(x - x₁)

y - 2 = -7(x + 3)

y = -7x - 21 + 2

y = -7x - 19

Read more on slope here: brainly.com/question/20282417

#SPJ1

Part 1. The employee who is [tex]32[/tex]  years old could have [tex]2[/tex] doctor visits in one year, according to the given equation.

Part 2.The new employee is predicted to have [tex]3[/tex] more doctor visits per year than the previous employee, according to the given equation.

In its simplest form in algebra, the definition of an equation is a mathematical statement that shows that two mathematical expressions are equal.

For instance, [tex]3x+5 = 14[/tex] is an equation, in which [tex]3x+5[/tex] and [tex]14[/tex] are two expressions separated by an 'equal' sign.

Part 1: To predict how many doctors' visits an employee who is [tex]32[/tex]years old could have in one year, we need to substitute a = [tex]32[/tex] in the equation   [tex]v = 1/4a - 6[/tex] and solve for v:

[tex]v = 1/4a - 6[/tex]

[tex]v = 1/4(32) - 6[/tex]

[tex]v = 8 - 6[/tex]

[tex]v = 2[/tex]

Part 2: The previous employee's age is not given, so we cannot directly compare their doctor visits with the new employee's visits. However, we can use the same equation to predict how many doctor visits the new employee might have based on their age.

Let's assume that the age of the new employee is [tex]a+12[/tex], where a is the age of the previous employee. Then, we can substitute [tex]a+12[/tex] for a in the equation  [tex]v = 1/4a - 6[/tex]  and solve for v:

[tex]v = 1/4(a + 12) - 6[/tex]

[tex]v = 1/4a + 3 - 6[/tex]

[tex]v = 1/4a - 3[/tex]

Therefore, the employee who is [tex]32[/tex]  years old could have [tex]2[/tex] doctor visits in one year, according to the given equation.

Therefore, the new employee is predicted to have [tex]3[/tex] more doctor visits per year than the previous employee, according to the given equation.

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ1

there are 50,063,860 ways to assign scores to the 10 questions on a discrete structures final exam with a sum of 100 points and each question worth at least 5 points.

To determine the number of ways to assign scores to the 10 questions on a discrete structures final exam with a sum of 100 points and each question worth at least 5 points, we can use the concept of combinations.
First, we need to distribute 5 points to each of the 10 questions since they are worth at least 5 points. So, 10 * 5 = 50 points are already distributed. Now, we have 100 - 50 = 50 points left to distribute among the 10 questions.
We can solve this problem using the "stars and bars" method. In this method, we represent the points as "stars" and the gaps between questions as "bars". So, we have 50 stars and 9 bars to arrange. This problem then becomes a problem of finding the number of ways to arrange 50 stars and 9 bars.
The total number of elements (stars + bars) is 50 + 9 = 59. We need to choose 9 positions for the bars out of 59 positions, and the remaining positions will be filled by stars.
The number of ways to do this is given by the combination formula: C(n, k) = n! / (k! * (n-k)!)
Here, n = 59 (total elements) and k = 9 (positions for bars).
C(59, 9) = 59! / (9! * (59-9)!) = 59! / (9! * 50!)
By calculating the value, we get:
C(59, 9) = 50063860

for more questions on scores

https://brainly.com/question/25638875

#SPJ11

Answer:

[tex]2\sqrt{3} -6\sqrt{2} +2\sqrt{6}[/tex]

Step-by-step explanation:

The amount of carbon-14 that will remain after x half-lives can be represented by the function:

A(x) = A0 * (1/2)^x

where A0 is the initial amount of carbon-14.

Let A(x) be the amount of carbon-14 that will remain after x half-lives and let A0 be the initial amount of carbon-14.

Answer:

width = 2.93 cm

Step-by-step explanation:

Area of picture = 12 x 17 = 204

let x = width of border

2(17 + 2x)(x) + 2(12x) = 204

34x + 4x² + 24x - 204 = 0

4x² + 58x - 204 = 0

Use quadratic formula to find x:  a = 4, b = 58, c = -204

x = 2.93, -17.43       disregard the negative root

x = 2.93 cm

factor the right side of the formula A = 2πrx² + 2πrh, we can factor out 2πr from both terms:A = 2πr(x² + h)

What is cylinder?

A cylinder is a three-dimensional geometric shape that consists of two parallel circular bases of the same size and shape, and a curved lateral surface connecting the bases.

To factor the right side of the formula A = 2πrx² + 2πrh, we can use the distributive property of multiplication. We can factor out the common factor of 2πr from both terms in the expression, leaving us with 2πr times the sum of x² and h. This gives us the factored form A = 2πr(x² + h). This expression represents the surface area of a cylinder in terms of its radius (r) and height (h).

Factoring the right side of the formula in this way can simplify calculations and help us better understand the relationship between the variables in the formula.

Therefore, to factor the right side of the formula A = 2πrx² + 2πrh, we can factor out 2πr from both terms:A = 2πr(x² + h)

To learn more about cylinder from the given link:

https://brainly.com/question/16134180

#SPJ1

Answer: No, the answer is D (it gains electrons)

Step-by-step explanation:

An object becomes negatively charged by gaining electrons, not by gaining protons. Protons are positively charged particles found in the nucleus of an atom and are not easily gained or lost by an object. On the other hand, electrons are negatively charged particles that are more easily gained or lost by an object, leading to a net positive or negative charge. When an object gains electrons, it becomes negatively charged as the number of negatively charged particles (electrons) exceeds the number of positively charged particles (protons).

The domain of the function f(x) is: Domain: x≠0The function is not defined for x = 0, since it causes division by zero error. For all other values of x, the function f(x) is defined.

The domain for the function f(x)=4/|x|-2 is x≠0.

When dealing with functions with absolute values, it is vital to consider the circumstances under which the argument of

the absolute value sign becomes zero, since that's where the function becomes undefined.

When the absolute value of x is zero, the denominator becomes zero, which causes a division by zero error.

This function, therefore, has no output value for x = 0.

Domain of the function is the set of all permissible input values for the function, as the output values are defined for

only permissible input values.

In other words, we can say that a domain of a function is a set of all possible values that x can take on, whereas the

range is the set of all possible values that the function can take on.

Therefore, the domain of the function f(x) is: Domain: x≠0The function is not defined for x = 0, since it causes division by zero error. For all other values of x, the function f(x) is defined.

for such more question on function

https://brainly.com/question/14723549

#SPJ11

0.25 recurring can be expressed as the fraction 25/99.

A fraction is a mathematical expression representing a part of a whole, or a ratio between two numbers. It consists of a numerator, which represents the part or ratio being considered, and a denominator, which represents the whole or total.

To express 0.25 recurring as a fraction, we can use the following method:

Let x = 0.25 recurring

Then 100x = 25.25 recurring (multiply both sides by 100 to move the decimal point)

Subtracting the first equation from the second equation, we get:

100x - x = 25.25 recurring - 0.25 recurring

99x = 25

x = 25/99

Therefore, 0.25 recurring can be expressed as the fraction 25/99.

To learn more about Fraction from the given link

https://brainly.com/question/78672

#SPJ1

The measure of arc mAD is 119°.

In geometry, an arc is a portion of a curve or a circle. It is defined as a connected portion of the circumference of a circle, which is characterized by its central angle, length, and location. The length of an arc is proportional to the measure of its central angle, and the measure of the arc is given in degrees or radians.

The circumference of a circle is the distance around the circle, and it is equal to 2πr, where r is the radius of the circle. An arc of a circle is a part of the circumference, and its length can be calculated using the formula:

Arc length = (central angle/360 degrees) * 2πr

where the central angle is measured in degrees, and r is the radius of the circle.

Since chord AB, BC, CD, and DA form a quadrilateral, we know that the opposite angles of the quadrilateral add up to 180°. Therefore, ∠ABC = 180 - ∠DAB = 180 - 75 = 105°, and ∠BCD = 180 - ∠ADC = 180 - 102 = 78°.

Next, we can use the inscribed angle theorem to find the measure of arc AD. We know that ∠ACD is half the measure of arc CD, so arc CD = 2 * ∠ACD = 62°. Therefore, ∠ACD = 31°.

Similarly, ∠ABD is half the measure of arc AB, so arc AB = 2 * ∠ABD. We can find angle ABD by subtracting angle DAB from ∠ABC: ∠ABD = ∠ABC - DAB = 105 - 75 = 30°. Therefore, arc AB = 2 * 30 = 60°

Since the sum of the measures of angles ABD, ACD, and the central angle arc AD is 180°, we have:

∠ ABD + ∠ ACD + arc AD = 180

Substituting the values we found, we get:

30 + 31 + arc AD = 180

Solving for arc AD, we get:

arc AD = 180 - 30 - 31 = 119°

Therefore, the measure of arc mAD is 119°.

To know more about angle visit:

https://brainly.com/question/23117081

#SPJ1

The width of rectangular prism shaped tackle box given by jayce's grandfather to him for use on their first fishing trip together is equals to 8 inches.

We have, jayce's grandfather just give him a new tackle box for using on their first fishing trip together. The shape of box is rectangular prism. Let the dimensions or length, height and width of tackle box be l , h and w. In this case,

Volume of tackle box = 928 in³

Length of tackle box, l = 14.5 inches

Height of tackle box, h = 8 inches

Volume is defined as space occupied by shape. The formula for the volume of a rectangular prism is, Volume (V) = base area × height of the prism or

Volume of rectangular prism, V = l × h × w

So, 928 in³ = l × h × w in³

=> 928 in³ = 14.5 inches × 8 inches × w

=> 928 in³ = 116 in² × w

=> w = 928/116 = 8 inches

Hence, required width is 8 inches.

For more information about rectangular prism, visit :

https://brainly.com/question/26931624

#SPJ4

The average speed on stated speed for going and return journey is 24 miles per hour.

Average speed = total distance travelled/time taken

Let us assume the distance between store and starting point is d.

Total distance travelled = d + d

Total distance = 2d

Time while going = d/20

Time while returning = d/30

Keep the values in formula

Average speed = 2d/(d/20 + d/30)

Simplify denominator

Average speed = 2d/(30d + 20d/600)

Rearrange the values

Average speed = 2d × 600/50d

Cancel d and multiply

Average speed = 1200/50

Performing division

Average speed = 24 mph

Hence, the average speed is 24 mph.

Learn more about average speed -

https://brainly.com/question/4931057

#SPJ4