Match the following phase changes to their energy flow.
Evaporation
Melting
Freezing
Sublimation
Condensation
Deposition
[Choose]
[Choose]
Energy both absorbed and released
Energy absorbed
No energy flow
Energy released
[Choose]
[Choose]
[Choose ]
[Choose

Answer:

If a negatively charged object is brought near a neutral sphere, the electrons in the neutral sphere will move away from the negatively charged object, causing one side of the sphere to become slightly negative and the other side to become slightly positive.

Explanation:

This is because the negative charge repels the electrons in the neutral sphere, creating an imbalance of charges on the sphere.

a. The final concentration of KOH is 0.500 M.

b. The concentration of K+ and OH- ions is 0.500 M.

To solve this problem, we need to use the equation:

M1V1 = M2V2

where M1 is the initial concentration of the solution, V1 is the initial volume of the solution, M2 is the final concentration of the solution, and V2 is the final volume of the solution.

a) To find the concentration of each solute, we need to first determine the final volume of the solution:

Final volume = 50.0 mL + 25.0 mL = 75.0 mL

Now we can use the equation above to find the final concentration of KOH:

M1V1 = M2V2

(0.750 M)(50.0 mL) = M2(75.0 mL)

M2 = (0.750 M)(50.0 mL) / (75.0 mL)

M2 = 0.500 M

Therefore, the final concentration of KOH is 0.500 M.

b) To find the concentration of each ion, we need to use the final concentration of KOH and the fact that KOH dissociates into K+ and OH- ions in solution. The concentration of K+ and OH- ions will be the same as the final concentration of KOH:

[ K+ ] = 0.500 M

[ OH- ] = 0.500 M

Therefore, the concentration of K+ and OH- ions is 0.500 M.

Learn more about ionic concentration here https://brainly.com/question/27586088

#SPJ1

As alcohols and ethers undergo various reactions, there are a number of organic chemistry rules and principles that may be utilised to anticipate the main products that will result from those reactions.

Given that the water molecule can be thought of as H—OH, the Markovnikov's rule-following regioselectivity of alcohol products indicates that the hydrogen atom joins to the double bond carbon that has more hydrogen atoms, and the OH group attaches to the carbon that has fewer hydrogen atoms.

According to Markovnikov's rule, when an asymmetrical alkene is combined with an asymmetrical reagent, the reagent's negative half will connect to the carbon atom that has the fewest hydrogen atoms.

To know more about organic chemistry visit:-

https://brainly.com/question/14623424

#SPJ1

b. [tex]C_5N_4H_4O_3[/tex] is the chemical in the equation which acts as a base.

A base that can dissolve in water is referred to as being alkali. These chemicals produce salts when they interact chemically with acids. Red litmus can turn blue when bases are present. Depending on the specific way that the qualities of acidity and basicity are examined, the terms acid and base have been defined in a variety of ways.A base is defined as a compound which is capable of accepting a proton or a hydrogen ion in a chemical reaction.

Chemically, the equation is [tex]C_3N_2H_4+C_5N_4H_4O_3 \rightarrow C_3N_2H_5^+ +C_5N_4H_3O_3^-[/tex]

In this equation, [tex]C_5N_4H_4O_3[/tex] is the compound that is accepting a proton (or hydrogen ion) to form [tex]C_3N_2H_5^{+[/tex] and [tex]C_5N_4H_3O_3^-[/tex]. Therefore, [tex]C_5N_4H_4O_3[/tex] is the base in this equation.

learn more about  hydrogen ion Refer:brainly.com/question/15082545

#SPJ1

Answer:

Steam distillation is a specialized method of distillation used to extract essential oils, aromatic compounds, and other volatile substances from plants or other materials that are sensitive to high temperatures. This technique involves passing steam through the plant material, which vaporizes the volatile compounds, and then condensing the steam and the vaporized compounds into a liquid form.

The steam distillation process is typically carried out in a distillation apparatus, which consists of a boiling flask, a condenser, and a receiver. The plant material is placed in the boiling flask and steam is introduced into the flask from a separate boiler or steam generator. The steam then passes through the plant material, vaporizing the essential oils and other volatile compounds. The steam and the vaporized compounds then pass through the condenser, where they are cooled and condensed into a liquid form, which is collected in the receiver.

Steam distillation is particularly useful for extracting essential oils and aromatic compounds from plant materials that are too delicate to withstand the high temperatures required for traditional distillation techniques. It is commonly used in the production of essential oils for use in perfumes, aromatherapy, and other applications. Additionally, steam distillation is a relatively simple and inexpensive method of extracting volatile compounds from plant materials, making it a popular choice for small-scale producers and hobbyists.

An answer has a pOH of 8.3. True about the solution is that it is basic and has a pH of 5.7.

When one or more solutes are dissolved in a solvent, the result is a homogenous mixture known as a solution. a solvent is a substance that helps a solute dissolve so that a homogenous mixture results. When a substance dissolves in a solvent, it forms a homogenous mixture, which is known as a solute.

A continuous variation in the relative proportions of a number of substances that is homogeneous and can be changed up to the solubility limit. Although the word "solution" is typically used to describe the liquids state of a substance, it is also possible for gases and solids to form solutions.

To know more about Solution visit:

https://brainly.com/question/30665317

#SPJ1

The correct answer is that it is acidic and has a pH of 5.7.

Explanation:

That's Nucleus process

Answer:

Tertiary amine

Explanation:

An amine in which the nitrogen atom is directly bonded to three carbons of any hybridization which cannot be carbonyl group carbons.

Answer:

+ Triple covalent bond (CB) > double CB > single CB in terms of bond strength and energy needed to break the bonds

+ Triple bonds are the most reactive, double bonds are reactive but single bonds are unreactive

+ Single bond > double bond > triple bond in bond length

+ in single bond, 2 electrons are shared
+ in double bond, 4 electrons are shared
+ in triple bond, 6 electrons are shared

Fluorescence is a phenomenon where a substance absorbs light at a specific wavelength and then emits light at a longer wavelength. This process occurs when an electron in a molecule or atom absorbs energy, becomes excited, and then returns to its ground state by releasing the absorbed energy as light.

Carbon is a versatile element that forms various allotropes such as graphite, diamond, and fullerenes. In the context of nanotechnology, carbon is used to create nanostructures like carbon nanotubes, graphene, and other related materials.

Carbon nanotubes (CNTs) are cylindrical nanostructures made up of carbon atoms, and they have extraordinary mechanical, electrical, and thermal properties. These properties make CNTs useful in various applications such as electronics, energy storage, and composite materials.

Graphene, another carbon nanostructure, is a single layer of carbon atoms arranged in a hexagonal lattice. It exhibits remarkable electronic, thermal, and mechanical properties. Graphene has potential applications in fields like electronics, sensors, and energy storage.

A nanochemist is a scientist who specializes in studying the synthesis, characterization, and applications of nanomaterials, including carbon-based nanostructures.

In summary, fluorescence is a light emission process that can be observed in certain substances, while carbon nanostructures like carbon nanotubes and graphene are materials with unique properties that have promising applications in nanotechnology.

For more questions on: phenomenon

https://brainly.com/question/23850381

#SPJ11  

Answer:

velocity

Explanation:

Answer:

The number refers to the number of bonds each of the element makes: Hydrogen makes 1 bond, Oxygen makes 2 bonds, Nitrogen makes 3 bonds and Carbon makes 4 bonds. These four elements are widely used when it comes to drawing Lewis structures at introductory chemistry level.

Explanation:

if it helped you please mark me a brainliest :))

Answer:

first molecular mass of cs2= 12+2×32=76amu

no of moles=62.5/76=0.822moles

total no of molecules=6.022×[tex]10^{23}[/tex]×0.822=4.95×[tex]10^{23}[/tex]

total no of atoms ( one carbon disulfide has 3 atoms)=3×4.95×[tex]10^{23}[/tex]=14.85×[tex]10^{23}[/tex] atoms

Explanation:

i hope you find it helpful, have a nice day

In 62.5 g of carbon disulfide (CS2), there are approximately 1.48 x 10^24 total atoms. This is calculated by first finding the number of moles in 62.5 g, then multiplying this by the number of atoms in each mole (Avogadro's number).

To calculate the total atoms in a  62.5 g of carbon disulfide (CS2), you need to first find the molar mass of CS2 which is 76.14 g/mol (12.01 g for C + 2 * 32.06 g for S). Using Avogadro's number (6.02 x 10^23) which represents the number of entities in a mole, we can calculate the number of moles and then the total number of atoms.

First, calculate the number of moles in 62.5 g of CS2: 62.5 g / 76.14 g/mol = 0.820 moles

Second,  calculate the total atoms: 0.820 moles * 3 atoms/mole * 6.02 x 10^23 = 1.48 x 10^24 atoms

https://brainly.com/question/31881632

#SPJ3

In the given reaction:

zinc carbonate + sulfuric acid = zinc sulfate + carbon dioxide + water

The sulfuric acid was the source of the hydrogen in water. In the process, zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) combine to create zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).

The carbon in zinc carbonate is what produces carbon dioxide (CO2). (ZnCO3). Zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) interact during the process to produce zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).

The sulfuric solution is where water gets its hydrogen from. A substance called sulfuric acid is made up of the elements of hydrogen, sulfur, and oxygen.

Hydrogen ions (H+), which combine with the hydroxide ions (OH-) from the zinc carbonate to create water, are released into the solution when sulfuric acid reacts with zinc carbonate.

The carbon particle in the zinc carbonate molecule is where the carbon in carbon dioxide originates. Compounds containing zinc, carbon, and oxygen make up zinc carbonate. The carbon atom joins two oxygen atoms from the sulfuric acid during the reaction to create carbon dioxide. (CO2).

learn more about sulfuric acid here

https://brainly.com/question/10220770

#SPJ1

The theoretical yield of the ammonia that is produced in this reaction is 43.9g.

The mole is commonly used to express the amount of a substance in a chemical reaction or to compare the amount of different substances.

Number of moles of N2

1 mole of N2 occupy 22.4 L

x moles of N2 occupies 29 L

x = 1.29 moles

Number of  moles of H2 is;

14g/ 2 g/mol = 7 moles

Now;

1 mole of N2 reacts with 3 moles of H2

x moles of N2 reacts with 7 moles of H2

x = 2.33 moles

Then N2 is the limiting reactant

If 1 mole of N2 produces 2 moles of NH3

1.29 moles of N2 will produce 1.29 * 2/1

= 2.58 moles

Mass of NH3 = 2.58 moles * 17 g/mol

= 43.9g

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The resulting pH of the solution is calculated as to be approximately 2.97.

Formic acid is the simplest carboxylic acid that has the chemical formula HCOOH and structure H−C−O−H.

Balanced equation is : HCOOH + NaOH → NaCOOH + H₂O

n(HCOOH) = V x C = 55.0 mL x 0.25 mol/L = 0.01375 mol HCOOH

And 75.0 mL of 0.12 M NaOH solution contains: n(NaOH) = V x C = 75.0 mL x 0.12 mol/L = 0.009 mol NaOH

n(HCOOH remaining) = n(HCOOH) - n(NaOH) = 0.01375 mol - 0.009 mol = 0.00475 mol

pH = pKa + log([A-]/[HA])

pKa is acid dissociation constant for HCOOH, [A-] is concentration of formate ion (HCOO-), and [HA] is concentration of unreacted formic acid.

n(HCOO-) = n(NaOH) = 0.009 mol

V = 55.0 mL + 75.0 mL = 130 mL = 0.13 L

Therefore, concentration of unreacted formic acid is: [HA] = n(HCOOH remaining) / V = 0.00475 mol / 0.13 L = 0.0365 M

pH = pKa + log([A-]/[HA]) = -log(1.77 x 10⁻⁴ + log(0.009/0.0365) = 2.97

Therefore, resulting pH of the solution is approximately 2.97.

To know more about formic acid, refer

https://brainly.com/question/10738052

#SPJ1

Answer: D.

Explanation:

In an exothermic reaction, the reactants have higher potential energy than the products, and energy is released. In an endothermic reaction, the reactants have lower potential energy than the products, and energy is absorbed. In this case, the statement that best describes the total energy change of the system is D. The reactants have higher potential energy, and energy is absorbed.

I hope this helps. Let me know if you have any other questions!

Iodide anion's final molarity in the solution is 0.13388 M.

We can utilise the molarity formula, which is [tex]molarity =\frac{ moles of solute}{liters of solution}[/tex], to solve this problem.

First, we need to calculate the moles of iron(II) iodide.

Use the formula to accomplish this. [tex]moles =\frac{ mass}{molar mass}[/tex]. The molar mass of iron(II) iodide is 227.88 g/mol,

so the moles of iron(II) iodide is [tex]\frac{7.64 g }{227.88 g/mol }= 0.03347 moles[/tex]

Now, we can calculate the molarity of iodide anion.[tex]Molarity of iodide anion = \frac{moles of iodide anion}{liters of solution}[/tex].Since each mole of iron(II) iodide contains 1 mole of iodide anion, the moles of iodide anion is 0.03347 moles.

The liters of solution is 0.250 liters, so the molarity of iodide anion is [tex]\frac{0.03347 moles}{0.250 liters }= 0.13388 M.[/tex]

Therefore, the final molarity of iodide anion in the solution is 0.13388 M.

learn more about iodide anion Refer:brainly.com/question/16751517

#SPJ1

Answer: The balanced chemical equation for the reaction between SO2 and O2 is:

2 SO2 + O2 → 2 SO3

According to the equation, 1 mole of O2 reacts with 2 moles of SO2 to form 2 moles of SO3.

To determine which substance is the limiting reactant, we need to calculate the amount of product that can be formed by each reactant and choose the reactant that produces the least amount of product.

First, we need to determine the number of moles of SO2 and O2 present:

Number of moles of SO2 = mass / molar mass = 20 g / 64.06 g/mol = 0.312 moles

Number of moles of O2 = mass / molar mass = 20 g / 32.00 g/mol = 0.625 moles

Now we can calculate the amount of product formed by each reactant:

Amount of SO3 formed from SO2 = 0.312 moles × (2 moles SO3 / 2 moles SO2) × (80.06 g/mol SO3) = 12.48 g SO3

Amount of SO3 formed from O2 = 0.625 moles × (2 moles SO3 / 1 mole O2) × (80.06 g/mol SO3) = 100.10 g SO3

From the calculations, we can see that the limiting reactant is SO2, as it produces the least amount of product (12.48 g of SO3). Therefore, 12.48 g of SO3 is formed when 20 g of both SO2 and O2 are reacted.

Explanation:

Answer: Oxbow-shaped meanders have two sets of curves: one curving away from the straight path of the river and one curving back. An oxbow lake starts out as a curve, or meander, in a river.

Explanation:

you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.

To determine how much 3.0 M HCl is needed to react with 0.45 g of sodium hydrogen carbonate (NaHCO3) and get the most NaCl, you need to first calculate the number of moles of NaHCO3 that you have:

molar mass of NaHCO3 = 84.01 g/mol

moles of NaHCO3 = mass / molar mass = 0.45 g / 84.01 g/mol = 0.00536 mol

Next, you need to determine the stoichiometry of the reaction between NaHCO3 and HCl. The balanced chemical equation for this reaction is:

NaHCO3 + HCl → NaCl + H2O + CO2

From this equation, you can see that one mole of NaHCO3 reacts with one mole of HCl to produce one mole of NaCl. Therefore, you need 0.00536 moles of HCl to react with 0.00536 moles of NaHCO3.

To calculate the volume of 3.0 M HCl needed to provide 0.00536 moles of HCl, you can use the following equation:

moles of solute = concentration x volume of solution (in liters)

Rearranging this equation to solve for the volume of solution gives:

the volume of solution = moles of solute/concentration

Plugging in the values gives:

volume of solution = 0.00536 mol / 3.0 mol/L = 0.00179 L or 1.79 mL

Therefore, you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.

learn more about sodium hydrogen carbonate here

https://brainly.com/question/14240995

#SPJ1

The total Mole fraction of oxygen is 0.20 or 20% .

P=n(RTV)=n×const. Only the quantity is affected by the gas's nature in the calculation. Let's assume that we have a mixture of two ideal gases that are present in equal quantities based on this supposition.

The total moles of gas in the combination must first be determined:

Total moles of gas = moles of helium + moles of oxygen

Total moles of gas = 20.00 + 5.00

Total moles of gas = 25.00 moles

Next, we need to calculate the mole fraction of oxygen gas:

Mole fraction of oxygen = moles of oxygen / total moles of gas

Mole fraction of oxygen = 5.00 / 25.00

Mole fraction of oxygen = 0.20 or 20% (rounded to two decimal places)

To know more about Mole fraction visit:-

https://brainly.com/question/29808190

#SPJ1

Aluminum and chlorine react to generate aluminium chloride, according to a balanced chemical equation: 2Al + 3Cl2 2AlCl3. A quantity of aluminium chloride up to 139.5 g can be produced.

When the limiting reagent is totally transformed into products, the maximum amount of product is produced. Two moles of aluminium chloride are created by a full reaction between three moles of chlorine. Hence, 46.4 g of aluminium chloride is the maximum mass that can be produced.

The amount of aluminium and chlorine in the specified masses can be calculated as follows:

Number of moles of aluminum = 28.0 g / 27 g/mol = 1.04 mol

Number of moles of chlorine = 33.0 g / 35.5 g/mol = 0.93 mol

We may get the theoretical yield of aluminium chloride using the balanced equation: 2Al + 3Cl2 → 2AlCl3

1.04 mol Al × (2 mol AlCl3 / 2 mol Al) × (133.34 g AlCl3 / 1 mol AlCl3) = 139.5 g AlCl3

To know more about aluminium chloride visit:-

https://brainly.com/question/16088530

#SPJ1

The oxidation state of the iron ion in the complex [Fe(en)2(NO2)2]NO2 is +1.

What is Oxidation State?

Oxidation state, also known as oxidation number, is a number assigned to an atom in a chemical compound that represents the number of electrons that atom has gained or lost relative to its neutral state.

In other words, oxidation state is a measure of the degree of oxidation of an atom in a molecule or ion. An atom is considered to be oxidized if it loses electrons, and reduced if it gains electrons.

In the given complex [Fe(en)2(NO2)2]NO2, the metal is iron (Fe). To determine the oxidation state of the iron ion in the complex, we can use the oxidation states of the other atoms and the charge of the complex.

The en ligand is ethylenediamine (C2H8N2), which has a neutral charge. The NO2 ligand is nitrite, which has a -1 charge. The overall charge of the complex is -1 due to the NO2^- counterion.

Let x be the oxidation state of the iron ion.

From the ethylenediamine ligands, we have a total charge of +4 (2 x +2).

From the nitrite ligands, we have a total charge of -4 (2 x -1 x 2).

From the complex charge, we have a total charge of -1.

Setting the sum of these charges equal to the charge of the iron ion (x) gives us:

+4 - 4 - 1 = x

Simplifying the equation gives us:

-x = -1

Solving for x gives us:

x = +1

Learn more about Oxidation State from given link

https://brainly.com/question/25551544

#SPJ1

During the reaction, the hydrochloric acid molecules break apart into hydrogen ions (H+) and chloride ions (Cl-), which then react with the aluminium atoms to form aluminium chloride (AlCl₃) and hydrogen gas (H₂).

            HCl       HCl

             |         |

            Al        Al   aluminium

             |         |

            HCl       HCl

             |         |

            H₂         Cl₂

In the diagram, the reactants (hydrochloric acid and aluminium) are shown on the left-hand side, while the products (hydrogen gas and aluminium chloride) are shown on the right-hand side. The circles represent individual particles, with the blue circles representing aluminium atoms, the green circles representing chlorine atoms from hydrochloric acid, and the white circles representing hydrogen atoms from hydrochloric acid.

to know more about aluminium and hydrochloric acid here:

brainly.com/question/31305643

#SPJ1

If an object is changing directions, it can be moving at a constant speed while yet accelerating.

This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.

An object's acceleration vector also changes as it changes direction, which causes the object's velocity vector to change.

As a result, even though the item is moving at a constant speed, the change in its velocity vector is causing it to accelerate.

Centripetal acceleration is the term for the type of acceleration that keeps objects moving in a circular motion.

Even though an object's speed is constant while it moves in a circular pattern, it is still accelerating.

This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.

As an item follows a circular course, its acceleration vector also constantly changes direction along with its velocity vector.

learn more about constant speed here

https://brainly.com/question/2681210

#SPJ1

Explanation:

The weight of water vapor can be determined by using the ideal gas law, which relates the pressure, volume, and temperature of a gas to the number of moles of gas present. We can then use the molar mass of water to calculate the weight of the water vapor.

At standard temperature and pressure (STP), the pressure is 1 atm and the temperature is 273.15 K. The ideal gas law is expressed as:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K), and T is the temperature in Kelvin.

Rearranging this equation to solve for n, we have:

n = PV/RT

Substituting the values we know, we get:

n = (1 atm)(2.80 L) / (0.08206 L·atm/mol·K)(273.15 K)

n = 0.1082 mol

The molar mass of water is 18.01528 g/mol, so the weight of the water vapor is:

weight = n x molar mass

weight = 0.1082 mol x 18.01528 g/mol

weight = 1.952 g

Therefore, the weight of the water vapor is 1.952 g.

Answer:

1.63 × 10²⁴ particles

Explanation:

The equation to find the number of particles is:

Number of particles = Number of moles × Avagadro's constant

Number of particles = 2.7 × 6.02 × 10²³

∴ Number of particles = 1.63 × 10²⁴