Carbon Dioxide's Effects on Temperature (Edmentum)
Task 2:
Carbon Dioxide's Effects on Temperature
In this activity, you will use sodium bicarbonate tablets to see the effects of carbon dioxide on temperature. Sodium bicarbonate tablets are effervescent tablets that release carbon dioxide when dissolved in water.
Estimated time to complete: 1 hour
You will need these materials:
2 empty two-liter plastic bottles (or two similar-sized plastic containers with tight-sealing lids), rinsed
2 thermometers (not mercury)
1 liter of water, room temperature
a ball of clay, about 2 inches in diameter (needed only if you’re using two-liter plastic bottles)
2 sodium bicarbonate tablets (such as Alka-Seltzer)
a lamp with a 150-watt incandescent bulb (if direct sunlight is not available)
Follow these steps to set up the experiment. Then answer the question in part A.
Fill both bottles with water until they are half full.
In one bottle, place two sodium bicarbonate tablets.
Plug the opening of the two bottles tightly with clay. The clay will act as the cap.
Place one thermometer in each bottle by carefully piercing it through the clay, so that the thermometer dangles in the air inside the bottle. Stay safe: do not use mercury thermometers in the event that they might break. The bottles must remain tightly sealed. The thermometer must not touch the water.
Put both bottles in front of the lamp or in direct sunlight. Turn on the lamp and let the bottles stand for one hour. Stay safe: To avoid electrocution, keep all water away from electrical sources.
Hypothesis and Data Collection
Part A
Write down your predictions. After an hour, do you think there will be a temperature difference between the two bottles? Explain.
Part B
After one hour, record the temperatures. Write down your results.
Analyze and Extend
Part A
Was your prediction about the temperatures in the two bottles correct? Explain.
Part B
In your experiment, what is the dependent variable and what is the independent variable?
Part C
The tablets were a source of carbon dioxide. What can you conclude about the effect carbon dioxide has in the atmosphere?
Part D
The burning of fossil fuels, such as gasoline, coal, and oil, increases the amount of carbon dioxide in the atmosphere. Based on your experiment, what effects could this burning have on Earth’s temperature?
Part E
Mary is concerned about greenhouse gases in the atmosphere. She wants to buy an electric car that doesn’t use gasoline at all. What questions should Mary ask about electric cars to ensure that she is making a good choice for the environment?
Dispose of your waste properly:
Pour the water down the drain.
Rinse and recycle the plastic bottles.
Reuse the clay or place it in the trash.
Answer:
“You Asked” is a series where Earth Institute experts tackle reader questions on science and sustainability. Over the past few years, we’ve received a lot of questions about carbon dioxide — how it traps heat, how it can have such a big effect if it only makes up a tiny percentage of the atmosphere, and more. With the help of Jason Smerdon, a climate scientist at Columbia University’s Lamont-Doherty Earth Observatory, we answer several of those questions here.
Kathleen makes iced coffee by adding ice to her room temperature coffee in a glass. What statement explains what is taking place inside her glass?
The ce molecules will slow down over time.
The coffee molecules will speed up over time.
The cold is transferred from the ice to the coffee.
The heat is transferred from the coffee to the ice.
Answer:
The answer is the heat is transferred from the ice to the coffee.
Explanation:
Hot molecules tend to transfer to colder molcules, which causes the ice to melt and makes the coffee colder.
Hope this helps! :)
Do you think a benitoite ring would be costly or inexpensive?
Answer:
I think it would be costly due to the fact that the gem is very rare and gorgeous. Also, the current prices are on average $3,000 per carat, so I would say that is pretty costly.
Explanation:
Hope this helps:)....if not then sorry for wasting your time and may God bless you:)
What is the molarity of a solution that is prepared by adding 3 moles of CaSO4 in 1.5 L of water?
Answer:
[tex][CaSO_4] = 2 mol/L[/tex]
Explanation:
[tex][CaSO_4] = \frac{3 mol}{1.5 L} = 2 mol/L[/tex]
i need this done by tonight!!! GIVING BRAINLIEST TO CORRECT ANSWER
Match the terms to their definition.
Water circulation created by prevailing wind systems. The Gulf Stream is an example.
The length of open sea over which wind can blow steadily to create waves.
The amount of dissolved salt in a liquid.
The distance from the crest of one wave to the crest of another.
Water circulation created by differences in density.
This is what moves forward and through a wave.
The cyclical process of the changing state and movement of water around the Earth through evaporation, condensation, and precipitation.
As the amount of salt in water increases, the density of the water _________.
The type of energy possessed by moving water.
The rising of ocean water bringing nutrients up from the deep.
1.
The water cycle
2.
vapor transport
3.
salinity
4.
increases
5.
decreases
6.
surface currents
7.
Coriolis Effect
8.
deepwater currents
9.
trough
10.
wave period
11.
wavelength
12.
water molecules
13.
energy
14.
crest
15.
fetch
16.
electrical
17.
kinetic
18.
downwelling
19.
upwelling
Answer:
Gulf Stream. The Gulf Stream is a warm surface ocean current which originates in the Gulf of Mexico and flows northeast across the Atlantic, driven by the prevailing southwest winds. It influences the climate of the UK and Northwest Europe by bringing with it humid mild air.
How much energy is needed to raise the temperature of 15.21 g of a substance with a specific heat of 1.65 J/g°C from 137.0 °C to 234.3 °C?
Answer:
2441.9 Joules
Explanation:
This is a sensible heat change problem.
Energy = Specific Heat Capacity x Mass x Change in Temperature
To find the change in temperature, you need to use this formula: Temperature Final - Temperature Initial.
234.3 - 137.0 = 97.3
Energy = 1.65 x 15.21 x 97.3
Multiply that equation, and you get your answer! I hope this helps!
is CH3NH2O ionic or covalent
Answer:
i think ionic?
Explanation:
hope this helps
If 100g of nuclear waste Pu-239 is generated in a nuclear reactor, how long will it take to reduce down to 6.75g of Pu-239?
Answer:
See below...
Explanation:
6.79 = 100 ( 1/2)^n solve for n = number of half lives
3.88 half lives
3.88 * 24000 = 93 130.7 years
a) Is ethanoic acid a weak electrolyte or a strong electrolyte, give a reason for your answer. Show the dissociation of ethanoic acid in water.
Answer:
Acetic acid is a weak electrolyte because its dissociation constant is small meaning there will be few ions in solution to conduct electricity.
Weak electrolyte are very less or partially ionized and strong electrolytes are completely ionized or 100% ionized. Ethanoic acid is weak electrolyte.
How to determine whether a acid is weak or strong electrolyte ?
To determine whether the acid is strong electrolyte or weak electrolyte check whether it is completely ionize or partially ionized. The molecular formula of ethanoic is [tex]CH_3COOH[/tex] and ethanoic acid is also called acetic acid. Ethanoic acid is weak electrolyte because it does not dissociate very much.
The dissociation of ethanoic acid in water:
[tex]CH_{3}COOH_{(aq)} + H_{2} O_{(l)}[/tex] ⇄ [tex]CH_{3}COO^{-}_{(aq)} + H_{3}O^{+}_{(aq)}[/tex]
Thus, from above conclusion we can say that Ethanoic acid is weak electrolyte and the dissociation of ethanoic acid in water is: [tex]CH_{3}COOH_{(aq)} + H_{2} O[/tex] ⇄ [tex]CH_{3}COO^{-}_{(aq)} + H_{3}O^{+}_{(aq)}[/tex]
Learn more about Strong or Weak electrolyte here: https://brainly.com/question/1581652
#SPJ2
How many moles are in 7.8 g of acetamide, CH3CONH2?
Answer:
.13 moles
Explanation:
To begin this problem:
First you need to find the molar mass of acetamide, to do so:
C=12g, H=1.008g, O=16g, and N=14g2(12)+5(1.008)+1(16)+1(14)=59.04To find moles when given grams, we divide grams by the molar mass.
7.8g/59.04g/mol=.13 molesUsing 2 sig figs from what we are given, this is our final answer.
Do you think precipitation has a greater impact on the rate of chemical weathering or mechanical weathering? Explain
Greater rainfall has an greater increase on the rate of chemical weathering. Rain is a form of precipitation.
How much heat must be removed from 75.0 g of water at 90.0°C to cool it to 23.0°C?
Answer:
See below
Explanation:
75 g * ( 90 - 23) C * 1 cal / g-C
= 5025 cal = 21 034 .7 J
Identify those elements that can be isolated by electrolysis of their aqueous salts. (Select all that apply.)
lithium
tin
strontium
chlorine
Ideal Gas Law 1
Calculate the volume of 3.00 g of carbon dioxide gas at 288K and 123.3 kPa.
Give your answer in litres to three significant figures. Do not include units.
Answer:
1•323
Explanation:
mass of carbon=12
mass of oxygen=2*16=32
no of moles = 3/44
PV=nRT
V=(0.06818*8.31*288)/123.3*10^3
Jane was drinking a glass of water. She asked her father where the water
came from. Her father said it was groundwater that was pumped up by their
well. Jane wondered what the water looked like underground. This is what
her family said:
Mom: I think it looks like a huge ocean underground.
Dad: I think it looks like a small lake underground.
Jack: I think it seeps into little holes or spaces between the soil and the
rocks.
Annie: I think it looks like a long, underground tube filled with water.
Philip: I think it looks like an underground volcano with water spurting out
of the top.
Which person do you agree with the most
Janes brother Jack is actually correct, underground water seeps into little holes or spaces between the soil and the rocks.
Underground WaterSimply put, underground water is found in between soils and crack, another name for this is called aquifers were water is found.
It should be noted that underground water are found at varying levels depending the terrain.
Learn more about Underground Water here:
https://brainly.com/question/23135301
Another word for axis tilted on its side
What’s the answer to this?
Benzene
Benzene has low density than the water itself of about 0.9 g/cm³
Low denisty object than the water usually floats on the water.
Another example: orange peel which floats on water has density of about 0.84 g/cm³
A Student Mixes 40. ML Of 0.10 M HBr(Aq) With 60. ML Of 0.10 M KOH(Aq) At 25°C. What Is The [OH-] Of The Resulting Solution?
After the complete neutralization reaction occurs, excess hydroxide ion is left unreacted and concentration of the hydroxide ion, [OH-] is 0.02 M.
What is the concentration of the hydroxide ion, [OH-]?The hydroxide ion concentration is the amount in moles of hydroxide ion in a solution.
The hydroxide ion concentration is written as [OH-].
The equation of the reaction is given below:
[tex]HBr(aq) + KOH(aq) \rightarrow KBr(aq) + H_2O(l) \\ [/tex]
1 mole of HBr reacts with 1 mole of KOH
Moles of HBr = 40 mL × 0.1 M = 4 mmmoles
Moles of KOH = 60 mL × 0.1 M = 6 mmoles
Moles of [OH-] = 6 - 4 = 2 mmoles
Volume of solution = 100 mL
[OH-] = 2mmoles/100 mL = 0.02 M
Therefore, the concentration of the hydroxide ion, [OH-] is 0.02 M.
Learn more about concentration at: https://brainly.com/question/24595796
Correct formula for barium hydroxide
Ba(OH)2
HOPE IT HELPS...!!!
Please solve the question.
Answer:
B
Explanation:
I think it might be B because if the student's hypothesis was incorrect why redo it and make sure the results are the same as last time if it was already incorrect before.
(2 Question 6 Without modifying the apparatus, how could the reliability of the results be increased?
Explanation:
Reliability can be improved by completing each temperature more than once and calculating an average.
Why does the moon and the sun have the same mass.
Why does the moon and the sun have the same mass?
Answer: The difference is that, on the moon, you are much lighter than on the Earth, but you still have the same mass
Both mass and weight provide a measure of the amount of matter in an object. Mass is the preferred measure because:
a. mass is independent of location.
b. mass is dependent on location.
c. mass is easier to measure.
d. mass is measured using the metric system.
Answer:
I think it's because mass is independent of location
Answer:
A
Explanation:
mass doesn't change from changes in gravity unlike weight
SOLUTIONS
SHOW COMPLETE, CONVINCING WORK FOR THE FOLLOWING:
1.
A student is instructed to make 500.0 ml of 1.200 M silver nitrate solution for a lab. A stock solution of 5.00 M silver nitrate
is available. How many milliliters of the stock solution are required to make the solution needed for the lab?
120 mL
Answer: Because percent solutions can be expressed in three different ways, it is imperative that the type of percent solution be explicitly stated. If this information is not provided, the end user is left to "guess" whether w/v %, w/w %, or v/v % was used. Each percent solution is appropriate for a number of different applications. For example, commercial aqueous reagents, such as concentrated acids and bases, are typically expressed as weight/weight % solutions. For example, commercially available concentrated hydrochloric acid (HCl) is 37% by weight (w/w %). On the other hand, many dilute solutions used for biological research are expressed as weight/volume % (e.g., 1% sodium dodecyl sulfate, SDS). Volume/volume % solutes are also common, and are used when pure solutes in liquid form are used. For example, a 70 % (v/v) solution of ethanol can be prepared by dissolving 70 mL of 100% (i.e., 200 proof) ethanol in a total solution volume of 100 mL.
Nitrogen and hydrogen react to form ammonia. 12dm of hydrogen reacted with excess nitrogen to form 2dm of ammonia. What is the percentage yield of ammonia at room temperature and pressure.
The percent yield shows the extent to which reactants are converted to products. The percent yield of ammonia is 24.7%
Percent yieldThe percent yield is obtained from the theoretical yield and the actual yield. The reaction between hydrogen and Nitrogen is;
3H2 + N2 ---->2NH3
If 1 mole of H2 occupies 22.4 dm^3
x moles occupies 12dm^3
x = 0.54 moles
If 1 mole of NH3 occupies 22.4 dm^3
x moles of ammonia occupies 2 dm^3
x = 0.089 moles
Now;
From the reaction equation;
3 moles of hydrogen yields 2 moles of NH3
0.54 moles of hydrogen will yiled 0.54 moles * 2 moles/3 moles
= 0.36 moles of ammonia
Percent yield = 0.089 moles/0.36 moles * 100 = 24.7%
The percent yield of ammonia is 24.7%
Learn more about percent yiled: https://brainly.com/question/13505381
Small bodies from which the planets formed are called _____.
Answer:
The small bodies from which the planets formed are called planetesimals.
Please help!!
How many O2 molecules occupy a 1.0 L flask at 65°C and
103.7 kPa?
Select one:
O a. 28 molecules
O b. 2.2 x 1022 molecules
O c.
1.1 x 1023 molecules
O d.
1.6 x 1025 molecules
e. 1.7 x 1025 molecules
Answer:
B, 2.22×10^22 molecules
Explanation:
Given PV=nRT, n=PV/RT
n=103.7×1.0/8.314×(65+273.15)
= 0.0368858... moles
Given n= number of particles/avogadros number
number of particles=n×avogadros number
number of particles = 0.03688...×6.02x10^23
= 2.22×10^22 molecules
A particle has a velocity that is 70 % of the speed of light and weighs 206.8 times the mass of an electron. Find the wavelength of this particle?
One pound (1.00 lb) of body fat is equivalent to approximately 3.488 x 103
kcal.
The average amount of calories burned during running is 125 kcal/mile.
How many miles does an athlete have to run to burn off 1.00 lb of body fat?
Show your calculations.
Your Answer:
1 mil
2400
270
Since one pound (1.00 lb) of body fat is equivalent to approximately 3.488 x 10^3 kcal, then 27.9 miles must be covered to burn off one pound.
What is energy?Energy is defined as the ability to do work. Now we are told that one pound (1.00 lb) of body fat is equivalent to approximately 3.488 x 10^3
kcal.
Hence;
If 125 kcal is burnt by running one mile
3.488 x 10^3 kcal is burnt by running x miles
x = 3.488 x 10^3 kcal * 1 mile/125 kcal
x = 27.9 miles
Learn more about energy: https://brainly.com/question/1932868
What is another word for a substance that is a base?
A.
indicator
B.
amphoteric
C.
buffer
D.
alkaline
Answer:
D) alkaline
Explanation: