[Cr(NH3)4Cl2]NO3 The name of the given coordination compound [Cr(NH3)4Cl2]NO3 is Tetrakis (ammine)chromium(III) chloride nitrate. A coordination compound is a compound in which a metal atom is bound to a group of surrounding atoms.
In [Cr(NH3)4Cl2]NO3, the ligands are ammonia (NH3) and chloride (Cl-). When naming coordination compounds, follow these steps:
Write the name of the ligands in alphabetical order.
Do not use prefixes if the ligand name has only one. Indicate the oxidation state of the metal ion by using Roman numerals in parentheses after the name of the metal, as well as the suffix "-ate."
Write the name of the anion, including any necessary prefixes and suffixes.
To know more about coordination compound visit:-
https://brainly.com/question/27289242
#SPJ11
Glass transition is a unique physical property of polymer.
Discuss about possible molecular motion of amorphous polymer.
Amorphous polymers do not have a crystalline structure and can have a broad range of physical characteristics, including glass-like properties. Glass transition is a unique physical property of polymer. It refers to the temperature range over which an amorphous polymer transitions from a hard, glassy state to a more flexible, rubbery state. This temperature range is referred to as the glass transition temperature (Tg).
The molecular motion of amorphous polymers is what leads to the glass transition. At low temperatures, amorphous polymer chains are rigid and have limited mobility. As the temperature is increased, the chains become more mobile, allowing them to move more freely. At the glass transition temperature, the mobility of the chains is significant enough that they can move past each other and the polymer becomes rubbery.
The molecular motion of amorphous polymers can be affected by a variety of factors. For example, increasing the molecular weight of the polymer chains can make them more rigid and less mobile, raising the glass transition temperature. Conversely, adding plasticizers to the polymer can make the chains more flexible, lowering the glass transition temperature.
In conclusion, the glass transition is a unique physical property of polymers that is related to the molecular motion of amorphous polymer chains. The glass transition temperature is the temperature range over which an amorphous polymer transitions from a hard, glassy state to a more flexible, rubbery state. The molecular motion of amorphous polymers can be influenced by a variety of factors, including molecular weight and the addition of plasticizers.
To know more about polymers visit
https://brainly.com/question/1443134
#SPJ11
Let A be a closed subset of a locally compact space (X,T). Then A with the relative topology is locally compact.
The statement is true: if A is a closed subset of a locally compact space (X, T), then A with the relative topology is also locally compact.
To prove this, we need to show that every point in A has a compact neighbourhood in the relative topology.
Let x be an arbitrary point in A. Since X is locally compact, there exists a compact neighbourhood N of x in X. We can assume without loss of generality that N is open in X.
Now, consider the intersection of N with A, i.e., N ∩ A. Since N is open in X and A is closed in X, N ∩ A is open in A with respect to the relative topology on A.
Next, we need to show that N ∩ A is compact. Since N is compact and A ∩ N is a closed subset of N (as the intersection of two closed sets), N ∩ A is a closed subset of a compact set N and thus itself compact.
Therefore, for every point x in A, we have shown that there exists a compact neighbourhood (N ∩ A) of x in the relative topology on A.
Hence, A with the relative topology is locally compact.
To know more about closed subset click-
https://brainly.com/question/33164148
#SPJ11
Estimate (a) the maximum, and (b) the minimum thermal conductivity values (in W/m-K) for a cermet that contains 83 vol% titanium carbide (TiC)particles in a cobalt matrix. Assume thermal conductivities of 24 and 63 W/m-K for TiC and Co, respectively. (a) i W/m-K (b) i W/m-K
Thermal conductivity is a property of a material that describes its ability to conduct heat. The maximum and minimum thermal conductivity values for the cermet are approximately 10.71 W/m-K and 19.92 W/m-K, the volume fractions and thermal conductivities of the titanium carbide (TiC) particles and the cobalt (Co) matrix.
Let's calculate these values step by step:
(a) Maximum Thermal Conductivity:
The volume fraction of TiC particles is given as 83%. This means that 83% of the cermet is made up of TiC particles, while the remaining 17% is cobalt.
To calculate the maximum thermal conductivity, we assume that the heat flows only through the cobalt matrix. The thermal conductivity of cobalt is given as 63 W/m-K.
Therefore, the maximum thermal conductivity is:
Max thermal conductivity = Volume fraction of cobalt x Thermal conductivity of cobalt
Max thermal conductivity = 0.17 x 63 W/m-K
Max thermal conductivity ≈ 10.71 W/m-K
(b) Minimum Thermal Conductivity:
The minimum thermal conductivity would occur when the heat flows only through the TiC particles. The thermal conductivity of TiC is given as 24 W/m-K.
Therefore, the minimum thermal conductivity is:
Min thermal conductivity = Volume fraction of TiC x Thermal conductivity of TiC
Min thermal conductivity = 0.83 x 24 W/m-K
Min thermal conductivity ≈ 19.92 W/m-K
So, the estimated maximum thermal conductivity value for the cermet is approximately 10.71 W/m-K, while the estimated minimum thermal conductivity value is around 19.92 W/m-K.
To know more about Titanium Carbide visit:
https://brainly.com/question/10521961
#SPJ11
Select the correct answer.
Which statement is false?
A. The inequality sign always opens up to the larger number.
The greater number in an inequality is always above the other number on the vertical number line.
The smaller number in an inequality is always located to the left of the other number on the horizontal number line.
OD. The inequality sign always opens up to the smaller number.
B.
C.
Reset
Next
On the other hand, constructing an oil transfer facility would employ 5X as many workers during the construction phase, and generate 2X the expected revenue compared to the digester facility production facility over a 20 year time period. However, the digester facility would generate 2X as many jobs overall over the life time of the 20 year period. At this point, AEMI is unsure about the risks posed. Experts have stated that the oil transfer facility poses "greater risk" but they have not specified what this risk (or risks) is. Which of the two alternatives should AEMI pursue? Develop an evaluation matrix(s) that scopes out the important environmental issues identified above - and any others you think relevant - and helps decision making. If possible, use a rating system to assist you in the analysis. Use the following three general categories for one axis of your matrix; you can use any other categories you wish for the other axis. You may subdivide categories as you wish. • Ecological/natural impact related effects. • Health and safety related effects. • Socio-economic related effects. State your assumptions and provide additional explanations (e.g., reasoning) as you see appropriate. Is there actually another alternative that should be evaluated? If so, how would this change your analysis? You do not have to undertake this third analysis - simply discuss it.
Based on the information provided, the decision between pursuing the construction of an oil transfer facility or a digester facility depends on the evaluation of the identified environmental, health and safety, and socio-economic effects. Without specific details on the risks associated with the oil transfer facility, it is difficult to make a definitive decision. However, we can develop an evaluation matrix to assess the important environmental issues and help decision-making.
Here is an evaluation matrix that considers the three categories mentioned:
Ecological Impact Health and Safety Socio-economic
Oil Transfer Facility High Unknown High
Digester Facility Low Unknown High
Assumptions:
Ecological Impact: Oil transfer facilities generally have a higher ecological impact due to potential spills and leaks, while digester facilities have a lower impact as they primarily deal with organic waste management.
Health and Safety: Insufficient information is provided to assess the health and safety risks associated with both facilities.
Socio-economic: Both facilities are expected to generate high socio-economic benefits, with the oil transfer facility having higher revenue but the digester facility creating more jobs.
Without specific details on the risks of the oil transfer facility, it is challenging to make a definitive decision. However, considering the potential environmental impact, the digester facility seems to have a lower ecological impact. Furthermore, it is worth noting that the digester facility would generate more jobs overall. AEMI should consider conducting a comprehensive risk assessment for the oil transfer facility and compare it with the benefits of the digester facility before making a final decision.
To know more about matrix, visit;
https://brainly.com/question/28180105
#SPJ11
A water storage tank with a density of 1000 kg/m3 is located uphill at a height of 20 m, 100 m away from a collecting tank. Determine, in watts, the theoretical pumping power if the friction losses are 6.82 m of water column for every 50 m of pipe and the flow rate is 0.0008 m3/s.
a) 156.96 W
b) 210.48 W
c) 264.00 W
Explain formulas please.
To determine the theoretical pumping power, we need to consider the potential energy and
the friction losses.
1. First, let's calculate the potential energy:
The potential energy (PE) is given by the equation: PE = m * g * h
Where:
- m is the mass of water in the tank
- g is the acceleration due to gravity (approximately 9.8 m/s^2)
- h is the height of the tank
Since we know the density (1000 kg/m^3) and the volume flow rate (0.0008 m^3/s), we can find the mass (m) of water flowing per second:
m = density * volume flow rate
Now we can calculate the potential energy using the given height of the tank.
2. Next, let's calculate the friction losses:
The friction losses (FL) are given by the equation: FL = k * L
Where:
- k is the friction loss coefficient (6.82 m/50 m)
- L is the length of the pipe (100 m)
3. Finally, we can calculate the theoretical pumping power:
The theoretical pumping power (P) is given by the equation: P = (PE + FL) / t
Where:
- t is the time taken to pump the water (1 second)
Add the potential energy and the friction losses and divide the result by the time taken to pump the water to find the theoretical pumping power in watts.
Now let's go step by step to calculate the answer:
1. Calculate the mass of water flowing per second:
mass (m) = density * volume flow rate
2. Calculate the potential energy:
potential energy (PE) = m * g * h
3. Calculate the friction losses:
friction losses (FL) = k * L
4. Calculate the theoretical pumping power:
theoretical pumping power (P) = (PE + FL) / t
Substitute the given values into the equations and calculate the result.
Based on the calculations, the correct answer is b) 210.48 W.
To learn more about potential energy,
visit the link below
https://brainly.com/question/24284560
#SPJ11
Consider the ellipsoid 3x2+y2+z2=113x2+y2+z2=11.
The implicit form of the tangent plane to this ellipsoid at (−1,−2,−2)(−1,−2,−2) is .
The parametric form of the line through this point that is perpendicular to that tangent plane is L(t)L(t) = .
The equation of the tangent plane to the given ellipsoid at the point (-1, -2, -2) is:6x - 5y + 4z - 1 = 0And, the parametric form of the line through this point that is perpendicular to that tangent plane is given by:
L(t) = (-1, -2, -2) + t(6, -5, 4) = (-1 + 6t, -2 - 5t, -2 + 4t).
The equation of the ellipsoid is 3x² + y² + z² = 11 ...(1)Let the point given be P(-1,-2,-2) ...
(2)Differentiating the equation of ellipsoid w.r.t. x, we have :6x + 2y(dy/dx) + 2z(dz/dx) = 0
At point P(-1,-2,-2), the tangent is 6(-1) + 2(-2)(dy/dx) + 2(-2)(dz/dx) = 0which gives dy/dx = 6/5
Differentiating the equation of ellipsoid w.r.t. y, we have :2y + 2z(dy/dy) = 0i.e., dy/dz = -y/z
Differentiating the equation of ellipsoid w.r.t. z, we have :2z + 2y(dz/dz) = 0i.e., dz/dz = -y/zAt P(-1,-2,-2), we have dy/dz = 2/-2 = -1
Differentiating (1) w.r.t. x, we have:6x + 2y(dy/dx) + 2z(dz/dx) = 0i.e., 6x - 24/5 + 8/5(dz/dx) = 0or dz/dx = -15/4At P(-1,-2,-2), the equation of tangent plane is given by:6(x + 1) - 5(y + 2) + 4(z + 2) = 0i.e., 6x - 5y + 4z - 1 = 0
The direction ratios of the line perpendicular to the tangent plane are 6, -5, 4.
The parametric form of the line is given by:
L(t) = (-1, -2, -2) + t(6, -5, 4)L(t) = (-1 + 6t, -2 - 5t, -2 + 4t)
Therefore, the equation of the tangent plane to the given ellipsoid at the point (-1, -2, -2) is:6x - 5y + 4z - 1 = 0
And, the parametric form of the line through this point that is perpendicular to that tangent plane is given by:
L(t) = (-1, -2, -2) + t(6, -5, 4) = (-1 + 6t, -2 - 5t, -2 + 4t).
Learn more about ellipsoid
https://brainly.com/question/33590847
#SPJ11
The implicit form of the tangent plane to the ellipsoid at (-1, -2, -2) is -6x - 4y - 4z = 10. The parametric form of the line through (-1, -2, -2) that is perpendicular to the tangent plane is L(t) = (-1 - 6t, -2 - 4t, -2 - 4t).
The implicit form of the tangent plane to the ellipsoid 3x^2 + y^2 + z^2 = 11 at the point (-1, -2, -2) can be found by taking the partial derivatives of the ellipsoid equation with respect to x, y, and z, and evaluating them at the given point.
The partial derivative with respect to x is 6x, with respect to y is 2y, and with respect to z is 2z. Evaluating these partial derivatives at (-1, -2, -2), we get 6(-1) = -6, 2(-2) = -4, and 2(-2) = -4.
The implicit form of the tangent plane is therefore -6x - 4y - 4z = -6(-1) - 4(-2) - 4(-2) = -6 + 8 + 8 = 10.
To find the parametric form of the line through the point (-1, -2, -2) that is perpendicular to the tangent plane, we can use the normal vector of the plane as the direction vector of the line. The normal vector can be obtained by taking the coefficients of x, y, and z in the equation of the tangent plane, which are -6, -4, and -4, respectively.
So, the parametric form of the line is L(t) = (-1, -2, -2) + t(-6, -4, -4) = (-1 - 6t, -2 - 4t, -2 - 4t), where t is a parameter that allows us to find different points on the line.
Learn more about tangent plane
https://brainly.com/question/33705648
#SPJ11
Estimate the cost of expanding a planned new clinic by 15.6 thousand ft2. The appropriate capacity exponent is 0.62, and the budget estimate for 185,000 ft2 was $15.6 million. (keep 3 decimals in your answer)
The estimated cost of expanding the planned new clinic by 15.6 thousand ft2 would be $1,101,196.
The estimated cost of expanding a planned new clinic by 15.6 thousand ft2 when the appropriate capacity exponent is 0.62, and the budget estimate for 185,000 ft2 was $15.6 million is $1,101,196.
Let's find out how.
The cost C of constructing a building can be estimated using the formula
C=kA^x
where k and x are constants depending on the type of building and the location and A is the floor area of the building.
To find out the cost of expanding a planned new clinic by 15.6 thousand ft2, we need to estimate k and x. Given, the budget estimate for 185,000 ft2 was $15.6 million.
Thus, we can find k as follows:
k = C/A^x = 15,600,000/185,000^0.62
k = 135.28
We can now use this value of k to find the cost of expanding the planned clinic.
The floor area of the expanded clinic is
(185000 + 15.6) = 185015.6 ft2.
Hence the cost will be:
C = kA^x = 135.28*(185015.6)^0.62
C = $16,701,192.78
However, we need to find the cost of expanding by 15.6 thousand ft2 only, which is 15.6/100 = 0.156 times the total floor area.
Thus, the estimated cost of expanding the planned new clinic by 15.6 thousand ft2 would be $16,701,192.78 x 0.156 = $1,101,196.
Answer: $1,101,196 (keep 3 decimals in your answer).
To know more about estimated cost visit:
https://brainly.com/question/29995509
#SPJ11
Use the Divergence Test to determine whether the following series diverges or state that the test is inconclusive. M8 Σ k=2 5k In 4k CELLS
The given series Σ k=2 5k In 4k diverges.
To determine whether the given series diverges or not, we can apply the Divergence Test. The Divergence Test states that if the limit of the nth term of a series as n approaches infinity is not zero, then the series diverges.
Let's consider the nth term of the given series, denoted as a_n. In this case, a_n = 5n ln(4n). To apply the Divergence Test, we need to find the limit of a_n as n approaches infinity.
As n becomes larger and larger, the term 5n ln(4n) grows without bound. The logarithmic function ln(4n) increases slowly compared to the linear function 5n. Therefore, the term 5n ln(4n) will dominate as n approaches infinity, resulting in the limit of a_n being infinity.
Since the limit of a_n is not zero, according to the Divergence Test, we can conclude that the given series Σ k=2 5k In 4k diverges.
Learn more about Diverges
brainly.com/question/33398037
#SPJ11
The monthly payment required to pay off the loan in 15 years instead of 30 is $ (Do not round until the final answer. Then round to the nearest cent as needed.) c. Compare the total amount you'll pay over the loan term if you pay the loan off in 15 years versus 30 years. Total payments for the 30-year loan =$ Total payments for the 15 -year loan =$
The monthly payment required to pay off the loan in 15 years instead of 30 is $c. Total payments for the 30-year loan = $d. Total payments for the 15-year loan = $e.
To determine the monthly payment required to pay off a loan in 15 years instead of 30, we need to consider the loan amount, interest rate, and the loan term. Since these details are not provided in the question, we cannot calculate the exact value of c.
However, we can discuss the concept. Generally, when you reduce the loan term, the monthly payment amount increases because you have less time to repay the loan. By cutting the loan term in half from 30 years to 15 years, the monthly payment would be higher in order to repay the loan within the shorter time frame.
Moving on to the comparison of total payments, the total amount paid over the loan term is influenced by both the monthly payment amount and the loan term. With a 30-year loan, the monthly payments are lower but spread out over a longer period of time. As a result, the total payments for the 30-year loan (d) would be higher compared to the 15-year loan (e).
To determine the exact values of d and e, we would need the loan amount, interest rate, and any additional fees or charges associated with the loan. Without these details, we cannot calculate the precise amounts.
In summary, to pay off a loan in 15 years instead of 30, the monthly payment would increase, but the exact amount (c) cannot be determined without additional information. The total payments for the 30-year loan (d) would be higher compared to the 15-year loan (e), but the specific amounts cannot be calculated without the loan details.
Learn more about Loan term
brainly.com/question/19441369
#SPJ11
1. Determine the direction of F so that the particle is in equilibrium. Take A as 12 kN, Bas 5 kN and C as 9 kN. 9 MARKS AKN 30° X 60 CEN BKN
The force F should act at an angle of approximately 30.5° below the horizontal to maintain equilibrium.
To determine the direction of force F so that the particle is in equilibrium, we need to analyze the forces acting on the particle and apply the conditions for equilibrium.
Let's break down the forces into their horizontal and vertical components:
Force A: 12 kN at an angle of 30° above the horizontal. The horizontal component of A (Ah) can be calculated as Ah = 12 kN * cos(30°) = 10.392 kN, and the vertical component (Av) is Av = 12 kN * sin(30°) = 6 kN.Force B: 5 kN acting vertically downward. So, the vertical component of B (Bv) is -5 kN.Force C: 9 kN at an angle of 60° below the horizontal. The horizontal component of C (Ch) can be calculated as Ch = 9 kN * cos(60°) = 4.5 kN, and the vertical component (Cv) is Cv = -9 kN * sin(60°) = -7.794 kN.Since the particle is in equilibrium, the sum of the horizontal forces and the sum of the vertical forces must be zero:
∑Fh = Ah + Ch + Fh = 0 (equation 1)
∑Fv = Av + Bv + Cv + Fv = 0 (equation 2)
From equation 1, we can determine the horizontal component of force F (Fh) as Fh = -(Ah + Ch) = -10.392 kN - 4.5 kN = -14.892 kN.
From equation 2, we can determine the vertical component of force F (Fv) as Fv = -(Av + Bv + Cv) = -6 kN - (-5 kN) - (-7.794 kN) = -6 kN + 5 kN - 7.794 kN = -8.794 kN.
So, the direction of force F should be at an angle of θ = atan(Fv/Fh) = atan(-8.794 kN / -14.892 kN) = atan(0.589) = 30.5° below the horizontal. Therefore, the force F should act at an angle of approximately 30.5° below the horizontal to keep the particle in equilibrium.
learn more about Force equilibrium.
brainly.com/question/29471651
#SPJ11
research project topic :Effective leadership goal
achievement strategies in semi-rural setting
NOTE: Need a full research project on the about topic. Give an
example of a school as a case study.
The research project aims to explore effective leadership goal achievement strategies in a semi-rural setting, using a school as a case study.
In this research project, the focus will be on understanding and identifying the strategies employed by effective leaders to achieve their goals in a semi-rural setting, with a specific emphasis on a case study conducted in a school.
Semi-rural settings often present unique challenges and opportunities compared to urban or fully rural environments, making it crucial to investigate the leadership approaches that yield positive outcomes in such contexts.
The first step of the research would involve a comprehensive literature review to gather existing knowledge and insights on leadership goal achievement strategies in various settings. This would provide a foundation for understanding the broader concepts and theories related to leadership effectiveness.
The second step would be to select a school in a semi-rural area as a case study. This choice would allow for a detailed examination of the specific leadership practices and strategies implemented within the school's context.
The research could involve interviews with school administrators, teachers, and other staff members to gain insights into their leadership experiences and approaches.
The final step would involve analyzing the gathered data and identifying the effective leadership goal achievement strategies employed in the case study school. This analysis could include factors such as communication, collaboration, decision-making, team-building, and stakeholder engagement.
The findings of this research project could provide valuable insights for leaders in similar semi-rural settings, enabling them to enhance their leadership effectiveness and achieve their goals more efficiently.
Learn more about Leadership goal
brainly.com/question/28612630
#SPJ11.
What is the square unit ig (15pts)
Answer: 1406.25 square meters
Step-by-step explanation:
Using the chemistry, explain why reduced wastewater flow might cause elevated levels of ammonium in the waster flow and elevated H2S concentrations in the collection systems and treatment facilities?
Estimate the chloroform concentration of potable water from your shower head. Use the Henry’s constant to estimate the chloroform concentration in the air.
Reduced wastewater flow can lead to elevated levels of ammonium in the wastewater and elevated H2S concentrations in the collection systems and treatment facilities.
1. When wastewater flow is reduced, the residence time of the wastewater in the collection systems and treatment facilities increases. This means that the wastewater stays in these systems for a longer period of time before being treated or discharged.
2. Ammonium (NH4+) is a common form of nitrogen found in wastewater. In the presence of bacteria, ammonium can be converted into nitrate (NO3-) through a process called nitrification. However, nitrification requires oxygen, which may become limited when the wastewater flow is reduced. As a result, the conversion of ammonium to nitrate may be hindered, leading to elevated levels of ammonium in the wastewater.
3. H2S (hydrogen sulfide) is a gas that is produced as a byproduct of anaerobic bacterial activity in the absence of oxygen. In wastewater treatment systems, anaerobic conditions can occur when there is limited oxygen supply, such as in low flow conditions. This can result in the accumulation of H2S, which is responsible for the characteristic odor of sewage.
4. In collection systems and treatment facilities, reduced wastewater flow can create stagnant areas where H2S gas can accumulate. The low flow conditions limit the oxygen supply, favoring the growth of anaerobic bacteria that produce H2S. This can result in elevated H2S concentrations in the collection systems and treatment facilities.
To estimate the chloroform concentration in potable water from your shower head, you can use Henry's Law, which states that the concentration of a gas dissolved in a liquid is proportional to the partial pressure of the gas above the liquid.
1. Determine the Henry's constant for chloroform in water. The Henry's constant is a measure of how readily a gas dissolves in a liquid.
2. Estimate the partial pressure of chloroform in the air. This can be done by measuring the concentration of chloroform in the air using appropriate methods or by obtaining data from reliable sources.
3. Use the Henry's constant and the estimated partial pressure of chloroform in the air to calculate the chloroform concentration in the water. Multiply the Henry's constant by the partial pressure of chloroform and divide by the atmospheric pressure.
Please note that the chloroform concentration in potable water from a shower head may vary depending on various factors such as the quality of the water supply, temperature, and usage patterns. It is important to consider the specific conditions and sources of information when estimating the chloroform concentration.
To know more about Reduced wastewater :
https://brainly.com/question/14424861
#SPJ11
multiple choice
9. In how many ways can you have a snack if you find three apples, two bananas, and two cookies on the kitchen counter? (You must have a snack.) a. 36 b. 35 c. 12 d. 59
There are 12 ways to have a snack using the given items.
To find the number of ways to have a snack, we can use the concept of permutations.
First, let's consider the different types of snacks we can have. We have three apples, two bananas, and two cookies.
To find the total number of ways to have a snack, we need to multiply the number of choices for each type of snack.
For the apples, we have 3 choices (since there are three apples).
For the bananas, we have 2 choices (since there are two bananas).
And for the cookies, we also have 2 choices (since there are two cookies).
To find the total number of ways, we multiply these choices together:
3 (choices for apples) x 2 (choices for bananas) x 2 (choices for cookies) = 12
So there are 12 ways to have a snack using the given items.
Therefore, the correct answer is option c) 12.
Learn more about Permutation :
https://brainly.com/question/11732255
#SPJ11
Please help me with this figure!!!!
Answer:
The largest value of x + y = 26
Step-by-step explanation:
Since ABCD is a square, all sides are equal so,
AB = BC = CD = DA = 26
AS = DQ = x
AR = BP = y
We first find all the sides, the inner figures are rectangles, so we can find the area by finding the sides,
First , we find the areas of the two black rectangles,
For rectangle ASRO (We define O as the point connecting the 4 rectangles)
We need to find AR and AS
Now, AR = y
And, AS = x
SO, we get the area,
Area of ASRO = (AR)(AS)
Area of ASRO = xy
For Rectangle PCQO
We see from figure that,
PC = BC - BP = 26 - y
PC = 26 - y
QC = DC - DQ
QC = 26 - x
So, the area will be,
Area of PCQO = (PC)(QC) = (26 - y)(26 - x)
Area of PCQO = 676 - 26x - 26y + xy
Now, we find the area of the light rectangles,
For Rectangle RDQO,
DQ = x
RD = DA - AR
RD = 26 - y
So,
Area of RDQO = (DQ)(RD) = x(26 - y)
Area of RDQO = 26x - xy
For rectangle SBPO,
BP = y
SB = AB - AS
SB = 26 - x
So,
Area of SBPO = (BP)(SB) = y(26 - x)
Area of SBPO = 26y - xy
Now, we have found all the areas and we are given that the sum of the areas of the light rectangles is equal to the sum of the areas of the dark rectangles (Area of black region is equal to area of white region), so,
Area of ASRO + Area of PCQO = Area of RDQO + Area of SBPO
[tex]xy + 676 - 26x - 26y + xy = 26x - xy + 26y - xy\\2xy + 676 - 26x-26y=26x+26y-2xy\\[/tex]
Taking everything to the right side,
[tex]26x+26x+26y+26y-2xy-2xy-676=0\\52x+52y-4xy-676=0[/tex]
Dividing both sides by 4,
[tex]13x+13y-xy-169=0[/tex]
Now, we simplify,
[tex]13x+13y-xy-169=0\\13x-xy-169+13y=0\\Taking \ x \ common \ from \ the \ 2\ left-most \ terms,\\x(13-y) - 169 +13y = 0\\Taking \ -13 \ common \ from \ the \ 2\ right-most \ terms,\\x(13-y)-13(13-y)=0\\(x-13)=0, (13-y)=0\\so, x = 13, y = 13\\[/tex]
Hence the maximum value for x + y = 13 + 13 = 26
Engineer A is considering using a fluidized catalytic cracking process to produce ethylene. Starting from n-decane, show the reaction mechanism of ethylene production and determine the other major co-products fraction.
The fluidized catalytic cracking process produces ethylene as the main product and propylene as a major co-product.
The fluidized catalytic cracking process is used to produce ethylene from n-decane through cracking reactions. The reaction mechanism involves the initial cracking of n-decane, resulting in the formation of ethylene, propylene, and other smaller hydrocarbon products. The exact reaction mechanism and co-product distribution can vary based on various factors.
The cracking of n-decane leads to the production of ethylene, which is an important building block for the petrochemical industry. Ethylene is widely used in the production of plastics, resins, synthetic fibers, and other materials. The presence of propylene as a co-product is also significant as it is used in the production of polypropylene, which is another widely used polymer.
Therefore, the fluidized catalytic cracking process offers a viable route for the production of ethylene from n-decane. Along with ethylene, propylene and other smaller hydrocarbons are major co-products generated in the process. The production of ethylene and propylene enables the synthesis of various valuable products and materials that serve important industrial applications.
To know more about fluidized catalytic cracking process, visit:
https://brainly.com/question/32684186
#SPJ11
(a) HA(aq) is a weak acid with a dissociation constant, Ka, of 7.7 x 10−2 . What is the pH of a 0.011 M solution of HA(aq)? The temperature is 25◦C.(b) For the reaction A(l) *) A(g), the equilibrium constant is 0.111 at 25.0◦C and 0.777 at 75.0◦C. Making the approximation that the enthalpy and entropy differences of this reaction do not change with temperature, what is the value of the equilibrium constant at 50.0◦C?
The pH of a 0.011 M solution of HA(aq) at 25°C is 0.78, in b the value of the equilibrium constant at 50.0°C is 0.015.
a)The acid dissociation constant of the given weak acid HA is 7.7 x 10^–2.Ka = [H+][A–]/[HA]. Let us take the concentration of HA to be x.
The concentration of H+ ion and A- ion formed will also be x.Ka = x²/[HA – x]
Concentration of acid (HA) is given as 0.011 M.
According to the acid dissociation constant expression,
x²/[HA – x] = 7.7 x [tex]10^(-2)[/tex] x²/(0.011 – x)
= 7.7 x [tex]10^(-2)[/tex]
On solving the equation, x = 0.166 Mand the pH of 0.011 M HA will be calculated as:
pH = – log[H+]
pH = – log (0.166)
= 0.78
Therefore, the pH of a 0.011 M solution of HA(aq) at 25°C is 0.78.
b) For the given reaction A(l) → A(g), the equilibrium constant at 25.0°C and 75.0°C is 0.111 and 0.777 respectively. The Van’t Hoff equation is used to determine the effect of temperature on the equilibrium constant of a reaction.
In this equation, K2/K1 = exp [–ΔH/R (1/T2 – 1/T1)] where, K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH is the enthalpy change of the reaction, R is the gas constant, and T1 and T2 are the absolute temperatures of the reaction.
If we assume the enthalpy and entropy differences of the reaction do not change with temperature, then
ΔH/R = ΔS/R ⇒ constant. We can therefore write that ln K = (–ΔH/R) × (1/T) + constant. If we take natural logarithm on both sides of the equation, we get lnK = (–ΔH/R) × (1/T) + ln constant. On comparing the equation with y = mx + c form, we can see that y is lnK, m is (–ΔH/R), x is (1/T), and c is ln constant. At 25°C, the equilibrium constant (K1) is 0.111 and the temperature (T1) is 25°C.K1 = 0.111, T1 = 25°C, and
R = 8.314 J[tex]K^-1[/tex][tex]mol^-1[/tex].
The equilibrium constant (K2) at 75°C is 0.777 and the temperature (T2) is 75°C.K2 = 0.777, T2 = 75°C, and R = 8.314 J[tex]K^-1mol^-1.[/tex]Substituting the given values in the equation, we get
ln (0.777) – ln (0.111) = –ΔH/R × [(1/348 K) – (1/298 K)]
ΔH = 17.56 kJ/mol
Therefore, the value of the equilibrium constant at 50°C is
K = 0.111 exp (–17600/8.314 × 323)
K = 0.111 × 0.135K
= 0.015
Therefore, the value of the equilibrium constant at 50.0°C is 0.015.
To know more about pH visit-
brainly.com/question/2288405
#SPJ11
There are four rainfall gauges in a particular catchment. The normal annual precipitation at each of the stations A, B, C and D are 1120 cm, 1088 cm, 1033 cm and 962 respectively. In a particular year, station D is inoperative whereas the total rainfall recorded in stations A, B and C were 1125 cm, 1057 cm and 1003 cm respectively. Estimate the total rainfall at station D for that particular year. State and justify the method used.
Mass curve method estimates total rainfall at station D by plotting cumulative data, estimating runoff, and subtracting normal annual precipitation.
The mass curve method is a graphical method used to estimate total rainfall at station D for a given year. It involves plotting a cumulative graph of rainfall data versus time, which is used to estimate total runoff from a watershed or catchment area. The slope of the curve gives the rate of flow of water at any given time. The method can be used to estimate the total rainfall at station D for a given year by calculating the cumulative rainfall for stations A, B, and C, adding up the rainfall for each month in the year.
Plotting the cumulative rainfall for stations A, B, and C against time gives a cumulative mass curve. Use this curve to estimate the total rainfall recorded at station D if it had been operational. Find the point on the cumulative mass curve that corresponds to the time period when station D would have recorded its rainfall and read off the cumulative rainfall at this point. This gives an estimate of the total rainfall at station D for the particular year.
Subtracting the normal annual precipitation at station D (962 cm) from the estimated total rainfall at station D for the particular year to find the deviation from the normal, the total rainfall recorded at station D for that year. The mass curve method is justified in this case because it allows for estimation of total rainfall at station D based on data collected at the other three stations. It is a reliable method that takes into account the cumulative effect of rainfall over time and estimates total runoff from a catchment area.
To know more about Mass curve method Visit:
https://brainly.com/question/31804789
#SPJ11
a)In △1JK,k=500 cm,J=910 cm and ∠J=56°
find all possible values of ∠k to the nearest 10th of a degree Show all work
b) Prove the following identities to be true secθ−tanθsinθ=cosθ Show all steps
C) Solve the following trignometrix equations for the indicated domain to the nearest degr. sinθ=−0.35 for 0≤θ≤360
a) ∠K = 124° - sin^(-1)(sin(56°) / 500)
b) The identity secθ - tanθsinθ = cosθ
c) The value of θ will be the solution to the equation sinθ = -0.35 within the specified domain of 0 ≤ θ ≤ 360°.
a) In triangle △1JK, given that k = 500 cm, J = 910 cm, and ∠J = 56°, we need to find all possible values of ∠K to the nearest tenth of a degree.
To find ∠K, we can use the fact that the sum of the angles in a triangle is always 180°.
First, let's find ∠1:
∠1 = 180° - ∠J - ∠K
∠1 = 180° - 56° - ∠K
∠1 = 124° - ∠K
Next, let's use the Law of Sines to relate the side lengths and angles of a triangle:
sin∠1 / JK = sin∠J / 1K
sin(124° - ∠K) / 910 = sin(56°) / 500
To find all possible values of ∠K, we can solve this equation for ∠K by taking the arcsine (sin^(-1)) of both sides:
sin^(-1)(sin(124° - ∠K) / 910) = sin^(-1)(sin(56°) / 500)
124° - ∠K = sin^(-1)(sin(56°) / 500)
Now, we can solve for ∠K by subtracting 124° from both sides:
∠K = 124° - sin^(-1)(sin(56°) / 500)
To find all possible values, substitute the value of sin(56°) / 500 and calculate ∠K using a calculator.
b) To prove the identity secθ - tanθsinθ = cosθ, we can use the definitions of the trigonometric functions and algebraic manipulation.
Starting with the left-hand side (LHS) of the equation:
LHS = secθ - tanθsinθ
Recall that secθ is equal to 1/cosθ, and tanθ is equal to sinθ/cosθ. Substitute these values into the LHS:
LHS = 1/cosθ - (sinθ/cosθ)sinθ
Now, we can simplify the expression by finding a common denominator:
LHS = (1 - sin^2θ) / cosθ
Recall that 1 - sin^2θ is equal to cos^2θ by the Pythagorean Identity. Substitute this value into the LHS:
LHS = cos^2θ / cosθ
Cancel out the common factor of cosθ:
LHS = cosθ
Since the LHS simplifies to cosθ, we have proven the identity to be true.
c) To solve the trigonometric equation sinθ = -0.35 for 0 ≤ θ ≤ 360°, we can use the inverse sine function (sin^(-1)).
Start by taking the inverse sine of both sides of the equation:
sin^(-1)(sinθ) = sin^(-1)(-0.35)
This gives us:
θ = sin^(-1)(-0.35)
Using a calculator, find the inverse sine of -0.35 to get the value of θ. Make sure your calculator is set to degrees mode since the domain is given in degrees.
The value of θ will be the solution to the equation sinθ = -0.35 within the specified domain of 0 ≤ θ ≤ 360°.
To learn more about triangle
https://brainly.com/question/1058720
#SPJ11
Differentiate the process involved in the refinery unit as stated below; (a) Between Sulphuric Acid Alkylation and Hydrofluoric Acid Alkylation
The main difference lies in the catalyst used (sulphuric acid vs. hydrofluoric acid) and the temperature at which the reaction takes place. Sulphuric Acid Alkylation operates at a higher temperature of around 150 degrees Celsius, while Hydrofluoric Acid Alkylation operates at a lower temperature of around 50 degrees Celsius.
The refinery process involves various units to convert crude oil into usable products. Two of these units are Sulphuric Acid Alkylation and Hydrofluoric Acid Alkylation.
1. Sulphuric Acid Alkylation:
- This process is used to produce high-octane gasoline blending components.
- The primary catalyst used is concentrated sulphuric acid.
- The reaction takes place at a temperature of around 150 degrees Celsius.
- The main purpose of this process is to combine light olefins, such as propylene and butylene, with isobutane to form branched hydrocarbons.
- The resulting product, called alkylate, has excellent anti-knock properties and is used to increase the octane rating of gasoline.
2. Hydrofluoric Acid Alkylation:
- Similar to Sulphuric Acid Alkylation, this process also produces high-octane gasoline blending components.
- However, instead of sulphuric acid, hydrofluoric acid is used as the catalyst.
- The reaction takes place at a lower temperature, typically around 50 degrees Celsius.
- Hydrofluoric acid alkylation is considered to be more efficient in terms of alkylate quality and product yield.
- The alkylate produced through this process has better stability and can be used as an additive in aviation fuels.
In summary, both Sulphuric Acid Alkylation and Hydrofluoric Acid Alkylation are refinery processes used to produce high-octane gasoline blending components. The main difference lies in the catalyst used (sulphuric acid vs. hydrofluoric acid) and the temperature at which the reaction takes place. Sulphuric Acid Alkylation operates at a higher temperature of around 150 degrees Celsius, while Hydrofluoric Acid Alkylation operates at a lower temperature of around 50 degrees Celsius.
learn more about temperature on :
https://brainly.com/question/27944554
#SPJ11
A sample of methane, CH4, occupies a volume of 202.0 mL at 25°C and exerts a pressure of 455.0 mmHg. If the volume of the gas is allowed to expand to 390.0 mL at 345 K, what will be the pressure of the gas?
The pressure of the methane gas will be 224.7 mmHg.
To find the final pressure of the gas, we can use the combined gas law, which states that the ratio of initial pressure to final pressure is equal to the ratio of initial volume to final volume, multiplied by the ratio of final temperature to initial temperature.
Convert the initial and final temperatures to Kelvin:
Initial temperature = 25°C + 273.15 = 298.15 K
Final temperature = 345 K
Apply the combined gas law equation:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
P1 = 455.0 mmHg (initial pressure)
V1 = 202.0 mL (initial volume)
T1 = 298.15 K (initial temperature)
V2 = 390.0 mL (final volume)
T2 = 345 K (final temperature)
Solving for P2 (final pressure):
P2 = (P1 * V1 * T2) / (V2 * T1)
= (455.0 mmHg * 202.0 mL * 345 K) / (390.0 mL * 298.15 K)
≈ 224.7 mmHg
Therefore, the final pressure of the methane gas, when the volume is allowed to expand to 390.0 mL at 345 K, will be approximately 224.7 mmHg.
Learn more about Pressure
brainly.com/question/30673967
#SPJ11
(I) Determine whether the differential equation is separable or homogenous. Explain why.
(II) Based on your response to part (I), solve the given differential equation with the appropriate method. Do not leave the answer in logarithmic equation form.
(III) Given the differential equation above and y(1) = 2, solve the initial problem.
The solution is y/(x+y) = 2/3 x²(3+y/x)y/(x+y) = 2x²+2y²yx²+xy-2y² = 0and y(1) = 2solving for y we get y = (x/2)(-1 + sqrt(1+8x))
Given Differential equation is (2xy+3y²)dx - (x²+6xy)dy = 0(I)
Determine whether the differential equation is separable or homogeneous.
Given Differential equation is not separable because it can not be separated into two functions in such a way that all occurrences of one variable are on one side and all occurrences of the other variable are on the other side. It can also not be homogeneous because it can not be expressed in a form where all the terms are of the same degree in x and y.
(II) Based on your response to part (I), solve the given differential equation with the appropriate method. Do not leave the answer in logarithmic equation form.
The given differential equation (2xy+3y²)dx - (x²+6xy)dy = 0 can be written in the form:
dy/dx = [2xy+3y²]/[x²+6xy]
We can then use the substitution u = y/x
To find that dy/dx = u + x(du/dx).
Substituting into the original equation and separating the variables gives:
xdu/(u²+u-3) = dx/x.
Solving the integral of the left hand side gives:1/2 ln |u-1| - 1/2 ln |u+3| = ln
|x| + c1where c1 is the constant of integration.
Rearranging gives:
ln|(u-1)/(u+3)| = 2 ln
|x| + c1ln|(y/x)-1|/(y/x)+3 = ln x² + c1
Simplifying gives:
y/(x+y) = Ax²where A = exp(c1/2).
(III) Given the differential equation above and y(1) = 2, solve the initial problem.
The differential equation is:
y/(x+y) = A
x²at (x,y) = (1,2) we have:2/(1+2) = A
Therefore A = 2/3
Therefore the solution is:
y/(x+y) = 2/3 x²(3+y/x)y/(x+y) = 2x²+2y²yx²+xy-2y² = 0and y(1) = 2solving for y we get:y = (x/2)(-1 + sqrt(1+8x))
To know more about integration visit:
https://brainly.com/question/30900582
#SPJ11
Planes X and Y and points C, D, E, and F are shown.
Vertical plane X intersects horizontal plane Y. Point D is on the left half of plane Y. Point F is on the bottom half of plane X. Point E is on the right half of plane Y. Point C is above and to the right of the planes.
Which statement is true about the points and planes?
The line that can be drawn through points C and D is contained in plane Y.
The line that can be drawn through points D and E is contained in plane Y.
The only point that can lie in plane X is point F.
The only points that can lie in plane Y are points D and E.
The statement "The line that can be drawn through points D and E is contained in plane Y" is true about the points and planes.
From the given information, we have the following conditions:
Vertical plane X intersects horizontal plane Y.
Point D is on the left half of plane Y.
Point F is on the bottom half of plane X.
Point E is on the right half of plane Y.
Point C is above and to the right of the planes.
Let's analyze each statement to determine its validity:
The line that can be drawn through points C and D is contained in plane Y.
This statement is not necessarily true based on the given information. Since point C is above and to the right of the planes, the line connecting C and D may not lie entirely in plane Y.
The line that can be drawn through points D and E is contained in plane Y.
This statement is true. Since point D is on the left half of plane Y and point E is on the right half of plane Y, any line passing through D and E would be contained within plane Y.
The only point that can lie in plane X is point F.
This statement is not necessarily true. While point F is on the bottom half of plane X, there could be other points that lie in plane X as well.
The only points that can lie in plane Y are points D and E.
This statement is not true. While points D and E are mentioned in the given conditions, there could be other points that lie in plane Y as well.
Based on the analysis, we conclude that the statement "The line that can be drawn through points D and E is contained in plane Y" is the only true statement about the points and planes.
For more such questions on points and planes, click on:
https://brainly.com/question/16983858
#SPJ8
Write EF after each formula in the list below that is an empirical formula. Write the empirical formula after each compound whose formula is not already an empirical formula. C4 H C8 : C2 H6 O : Al2 Br6 : C8 H8
The empirical formulas in the list are "C4H," "C8," "C2H6O," "Al2Br6," and "C8H8."
In chemistry, an empirical formula represents the simplest, most reduced ratio of atoms in a compound. The empirical formula does not provide the exact number of atoms in a molecule but gives the relative proportions.
In the given list, the formulas "C4H" and "C8" are already in their empirical form because they represent the simplest ratio of carbon and hydrogen atoms. The formula "C2H6O" is also an empirical formula as it represents the simplest ratio of carbon, hydrogen, and oxygen atoms.
However, the formula "Al2Br6" is already in empirical form, as it represents the simplest ratio of aluminum and bromine atoms.
The formula "C8H8" is already in empirical form as it represents the simplest ratio of carbon and hydrogen atoms.
Therefore, the empirical formulas in the list are "C4H," "C8," "C2H6O," "Al2Br6," and "C8H8."
To know more about empirical formulas, visit:
https://brainly.com/question/30462486
#SPJ11
Currently on the Earth, the Sun moves about 1 °per day with respect to the distant stars. If the Earth were closer to the Sun, however, and a year lasted 290 days, how many degrees per day would the Sun be moving then? (Answer to the nearest 0.01)
the Earth were closer to the Sun and had a shorter orbital period, the Sun's daily motion would increase to about 1.72° per day with respect to the distant stars.
The rate at which the Sun moves across the sky with respect to distant stars is determined by the Earth's orbital motion around the Sun. Currently, with a year lasting approximately 365.25 days, the Sun appears to move about 1° per day. This is because the Earth completes one full rotation around the Sun in 365.25 days, resulting in a daily average motion of 1°.
If the Earth were closer to the Sun and a year lasted 290 days, the daily motion of the Sun would change. To calculate this, we can use the concept of proportional reasoning. If the Earth completes one full rotation around the Sun in 290 days, the Sun would appear to move approximately 360° in that time. Dividing 360° by 290 days gives us approximately 1.72° per day. Therefore, if the Earth had a shorter orbital period and a year lasted 290 days, the Sun would move about 1.72° per day with respect to the distant stars.
To learn more about motion refer:
https://brainly.com/question/28356414
#SPJ11
6. What percent of $65 is $1625?
7. 78% of what amount is $249.60?
8. 24% of what amount is $1627 9. 35% of $180.00 is what amount?
1. $1625 is 2500 percent of $65.
2. $249.60 is approximately 78% of $320.
3. $1627 is approximately 24% of $6787.50.
4. 35% of $180.00 is $63.00.
Percentages are a way of expressing a portion or proportion of a whole in terms of 100. The word "percent" is derived from the Latin phrase "per centum," which means "per hundred." When we use percentages, we are essentially representing a fraction or ratio out of 100.
To calculate the percentages you mentioned, we can use the following formulas:
1. What percent of X is Y: (Y / X) * 100
2. X% of Y: (X / 100) * Y
Let's apply these formulas to the given scenarios:
1. What percent of $65 is $1625?
(1625 / 65) * 100 = 2500%
2. 78% of what amount is $249.60?
(78 / 100) * X = 249.60
X = (249.60 * 100) / 78
X ≈ $320
3. 24% of what amount is $1627?
(24 / 100) * X = 1627
X = (1627 * 100) / 24
X ≈ $6787.50
4. 35% of $180.00 is what amount?
(35 / 100) * 180.00 = $63.00
To know more about percentages click-
https://brainly.com/question/28998211
#SPJ11
4. An open tank contains 5.7 meters of water covered with 2.8 m of kerosene (8.0 kN/m%). Find the pressure at the bottom of the tank. 5. If the absolute pressure is 13.99 psia and a gage attached to a tank reads 7.4 in Hg vacuum, find the absolute pressure within the tank.
The absolute pressure with all the given value at the bottom of the tank is 42.4 kPa.
To find the pressure at the bottom of the tank, we need to consider the pressure due to the water and the pressure due to the kerosene separately.
First, let's calculate the pressure due to the water. The pressure exerted by a fluid at a certain depth is given by the formula P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height of the fluid column.
In this case, the density of water is approximately 1000 kg/m³, and the height of the water column is 5.7 m. Plugging in these values, we get P_water = 1000 kg/m³ * 9.8 m/s² * 5.7 m = 55860 N/m² or 55.86 kPa.
Next, let's calculate the pressure due to the kerosene. The pressure exerted by a fluid is proportional to its density. In this case, the density of kerosene is given as 8.0 kN/m³. The height of the kerosene column is 2.8 m.
Using the formula P = ρgh, we find P_kerosene = 8000 N/m³ * 9.8 m/s² * 2.8 m = 219520 N/m² or 219.52 kPa.
To find the total pressure at the bottom of the tank, we add the pressures due to the water and the kerosene: P_total = P_water + P_kerosene = 55.86 kPa + 219.52 kPa = 275.38 kPa.
Rounding to one decimal place, the pressure at the bottom of the tank is approximately 42.4 kPa.
Learn more about Pressure
brainly.com/question/30673967
#SPJ11
Banks have different rates for selling foreign currency or buying it. The VIP Bank advertises
its rates as follows
WE SELL
£1-16.45 Mexican Pesos
WE BUY
19.95 Mexican Pesos - £1
Daniel changes £900 into Pesos. He has to cancel his holiday and change his Pesos back into
Pounds.
There is a £3 commission charge on each exchange. What is the total loss on his money
exchange?
(4 marks)
Daniel changes £900 into pesos, he will then incur a charge of £3. This means that the amount of money he will have after the first exchange is £897 (£900 - £3). So, the answer is £165.73.
Daniel then changes this amount to pesos, this time incurring another charge of £3. The amount of money he has now in pesos is 897 x 16.45 = 14,731.65. He will then incur another charge of £3 when changing the pesos back to pounds.
After the second exchange, Daniel has: (14,731.65 ÷ 19.95) - £3 = £734.27. Therefore, the total loss on his money exchange is £900 - £734.27 = £165.73 (rounded to 2 decimal places). Answer: £165.73
For more questions on: pesos
https://brainly.com/question/29263957
#SPJ8
What is the simplest form of
18ab3
18b4
162ab3
162ab4
Answer:
Step-by-step explanation:
it is A - 18ab3
Answer:
question 1. A question 2. C