naproxen (Aleve): 73.03%C, 6.13%H, and 20.84%O Express your answer as a chemical formula?

Answer: All the processes involve the release of heat.

Explanation: Note to self

Condensation, freezing and deposition release energy.

Evaporation, melting and sublimation absorb energy.

So if you have such a question first identify which process is taking place.

Two isomers are Butadiene Bicyclobutane.

To learn more about  isomers refers to:

brainly.com/question/26298707

#SPJ1

Answer:

6.82 Mol CO2

Explanation:

Answer:

0.4 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

HBr + KOH —> KBr + H₂O

From the balanced equation above,

The mole ratio of the acid, HBr (nₐ) = 1

The mole ratio of the base, KOH (n₆) = 1

Finally, we shall determine the molarity of HBr. This can be obtained as follow:

Volume of acid, HBr (Vₐ) = 0.5 L

Volume of base, KOH (V₆) = 0.1 L

Molarity of base, KOH (M₆) = 2 M

Molarity of acid, HBr (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 0.5 / 2 × 0.1 = 1

Mₐ × 0.5 / 0.2 = 1

Cross multiply

Mₐ × 0.5 = 0.2

Divide both side by 0.5

Mₐ = 0.2 / 0.5

Mₐ = 0.4 M

Thus, the molarity of the HBr solution is 0.4 M

Answer:

not balanced, oxygen, not equal

Explanation:

Alright, so let's go ahead and balance this equation!

The easiest way to do this is to take out a piece of paper and write down your elements on each side. Let's do it together:

--------------------------------------------------------------------------------------------------------------

[tex]2NaOH + H_{2} SO_{4}[/tex]  →  [tex]Na_{2}SO_{4} + H_{2}O[/tex]

Let's count the number of molecules for each element on both sides. Starting with the left side:

↓

[tex]2(NaOH) + H_{2} SO_{4}[/tex]

The coefficient of 2 in front of NaOH will be distributed to Na, O, and H. The subscripts for H and O only apply to themselves, so S will have only one molecule. Then our molecule counts for the reactant side (the left side) will be:

↓

Na:  2

 O:  2+4 = 6

 H:  2+2 = 4

 S:   1

↓

Now, let's move on to the right side:

[tex]Na_{2}SO_{4} + H_{2}O[/tex]

This side only has subscripts, no coefficients, so that means that any elements that don't have subscripts (S and the second O ) will have a count of one. Knowing this, our molecule count for the product side (right side) is:

↓

Na:  2

 O:  4+1 = 5

 H:  2

 S:   1

↓

Let's compare our counts now:

Left side:        Right side:

Na:  2             Na:  2

 O:  6               O:  5

 H:  4               H:  2

 S:   1                S:  1

We can see that our O and H molecule counts are different. So that means it's an unbalanced equation.

--------------------------------------------------------------------------------------------------------------

Therefore, your answer will be:

The equation is not balanced because the number of hydrogen atoms and oxygen atoms is not equal in the reactants and in the products.

The conservation of natural resources be most effective in reducing carbon dioxide in the atmosphere,  is the planting more trees.

The planting the more new tress is the one of the most effective ways to reduce the atmospheric carbon dioxide. this will also limits the global warming. the plants remove the carbon dioxide from the atmosphere through the photosynthesis. plants helps to stop the climate change as they will remove the carbon dioxide from the atmosphere. and  store the carbon in tress and the soil.

Thus , the way to reduce the carbon dioxide from the atmosphere is the planting more and more trees.

To learn more about  carbon dioxide here

https://brainly.com/question/19923519

#SPJ4

10.0g of CaBr2 contains 0.05 mol according to the equation mole(n) = mass / molar mass (10.0g CaBr2 x 1 mol CaBr2 / 199.88 g CaBr2 = 0.05 mol)

The mole, represented by the symbol mol, is the SI unit of material quantity. One mole is made up of precisely 6.022*1023 elementary components. The Avogadro number, NA, as expressed in mol1, is the fixed numerical expression of the Avogadro number.

The weight in grams of 1 mole of a certain substance is its molar mass. The atomic mass of the chemical unit, expressed in atomic mass units, determines the mass of a substance (amu).

To know more about mole visit :

https://brainly.com/question/28239680

#SPJ4

Answer:

It is higher in Norfolk because of the warm ocean currents from the south

Explanation:

Can I have brainliest answer please?

Answer:

See the attached images for solution.

Answer:

Its B

Explanation: I did the test passed btw

When bonding, atoms try to achieve a stable noble gas configuration.

Atoms are always trying to achieve stability. In the modern periodic table, noble gases present in the group 18 are the most stable. They have a completely filled outermost or the valence shell, that is, it contains 8 valence electrons in its valence shell.

Due to this stable electronic configuration, they are inert in nature, that is, they do not have a tendency to react by sharing or losing their electrons. When participating in a bonding, atoms try to lose or gain electrons to reach their nearest noble gas configuration and attain stability.

To know more about noble gas here

https://brainly.com/question/11414033

#SPJ4

Answer:

d on edge my guys.

Explanation:

By treating 54.0 grams of aluminum with a solution of zinc chloride, ZnCl, 328.6g/mol of zinc metal will be created.

The molar mass of a substance is its mass expressed in grams per mole. As shown in this video, the molar mass of a substance can be calculated by adding the molar masses of the substance's component atoms. The number of moles in the substance can then be calculated from its molar mass and converted to mass.

Balance chemical reaction,

2Al + 3ZnCl₂ → 2AlCl₃ +3Zn

Molar mass of aluminum is 27.99g/mol

Molar mass of zinc chloride is 136.29g/mol

The mole ratio of ZnCl₂ to Al is 3:2

Grams →  moles  → moles → grams

45Al × 1mol Al/27.99g Al × 3 mol ZnCl₂/2 mol Al × 136.29 g ZnCl₂/1 mol ZnCl₂

on simplification,

45×3×136.29/27.99×2 = 328.6g/mol.

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ4

Mg + 2HCl → H2 + MgCl2 because The reaction between magnesium and hydrochloric acid produces hydrogen gas and magnesium chloride.

Molecules are the smallest unit of a chemical compound that can exist independently and remain unchanged in chemical composition. A molecule is composed of two or more atoms that are chemically bonded together. A molecule can be made up of different elements, such as carbon, hydrogen, oxygen, and nitrogen, and can be composed of a variety of combinations of these elements. Molecules are essential components of all living things, as they are important for basic functions such as energy transfer, metabolism, and cell structure.

To learn more about molecule visit:

brainly.com/question/475709

#SPJ1

The pressure inside the container with 5 moles of gas, 62 liters volume and 222K temperature is 1.46 atm.

Ideal gas law illustrates the relation between pressure, volume and temperature of a gas. It is represented by the equation

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature.

V = 62 liters

n = 5 moles

R = 0.0821  L(atm) mol⁻¹K⁻¹

T = 222K

PV = nRT

P × 62 = 5 × 0.0821 × 222

P = 5 × 0.0821 × 222/62

P = 1.46 atm

To learn more about ideal gas law here

https://brainly.com/question/27870704

#SPJ4

The amount of sodium-24 decreases to approximately 125 g.

Sodium is a chemical element with the symbol Na on the periodic table. It is a soft, silvery-white, highly reactive metal and is a member of the alkali metal group of chemical elements.

The graph below shows the amount of 500 g sample of sodium-24 over time. The x-axis of the graph represents time (in hours), and the y-axis represents the amount of sodium-24 (in grams). The title of the graph is "Amount of sodium-24 in 500 g Sample Over Time".

The graph shows that the amount of sodium-24 in the sample decreases over time. After 24 hours, the amount of sodium-24 in the sample decreases to approximately 375 g. After 48 hours, the amount of sodium-24 decreases to approximately 250 g. After 72 hours, the amount of sodium-24 decreases to approximately 125 g.

To learn more about sodium
https://brainly.com/question/25597694
#SPJ1

The quantity of energy required to convert 0.562 kg ice at -20.0°C to steam at 250°C is equal to 1885.4 KJ.

The specific heat capacity can be described as the amount of energy needed to raise the temperature in one unit of material by one-degree celsius.

The addition or emission of heat from the system will the temperature of the substance will be changed:

Q = mCΔT

Given, the amount of ice, m = 0.562 Kg = 562 g

The change in the temperature = 100 -20 = 80°C

The specific heat capacity of the water, C = 4.18J/g°C

The specific heat capacity of the ice, C = 2.03 J/g°C

The phase transition from ice to steam:

H₁ = 562 × 2.03 × (0-(-20))

H₁ = 22,817 J = 22.8 KJ

The enthalpy of the fusion will be absorbed:

H₂ =  n × H(fus)

The number of moles of water = 562/18 = 31.22 mol

H₂ = 31.22 × 6.02 kJ/mol

H₂ = 187.95 KJ

Phase transition from water at 0°C to water at 100°C:

H₃ = 562 × 4.18 × 100

H₃ = 234 KJ

The phase transition from water at 100°C to steam at 100°C:

H₄ = n × H(vap)

H₄ = 31.22 × 40.7 kJ/mol

H₄  = 1270.65 KJ

The heat to make steam at a temperature of 250°C:

H₅ = m × S×ΔT

H₅ = 562 × 2.02 ×150 = 170 KJ

The total energy needed to convert  0.562 kg ice at -20.0°C to steam at 250.0°C:

H = H₁ + H₂+ H₃+ H₄ +H₅

H = 1885.4 KJ

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

Answer:

i got 12.1 as my answer hope it is right

The the volume that 0.540 mol of propane (C3H8) occupies at STP is 12.1 l.

Volume is a measurement of three-dimensional space that is occupied. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and the notion of length are connected.

The molar volume (Vm) is the volume occupied by one mole of a chemical element or chemical compound at standard temperature and pressure (STP). You may figure it out by dividing the mass density () by the molar mass (M).

From the ideal gas law;  V = nRT/ P

where,

n = 0.540 mol

universal gas constant R = 8.314 J/mol·K

standard temperature T = 273.15 K

standard pressure P = 101 325 Pa

Substituting the values into the formula ;

= 0.540 × 8.314 × 273.15 / 101.325

= 0.0121 m³

= 12.1 l

Thus, The the volume that 0.540 mol of propane (C3H8) occupies at STP is 12.1 l.

To learn more about the volume, follow the link;

https://brainly.com/question/13338592

#SPJ2

Answer: 1joule

Explanation:

Both tests, one using heated copper sulfate pentahydrate with iron filings and sulfur, and the other using copper sulfate pentahydrate, produced gas production and color changes.

Iron sulfide, which is black in color, is created when iron (gray) and sulfur (yellow) mix chemically.

Fe(s) + S(s) -> FeS(s)

The water molecules in the crystal of copper sulfate-pentahydrate (blue) evaporate when heated, transforming it into anhydrous copper sulfate, which is white in color.

CuSO4.5H2O -> CuSO4 + 5H2O

As a result, both reactions have changed in color and chemical organization. It is considered a chemical change to heat crystals of hydrated copper sulphate. An aqueous solution of copper sulphate loses copper ions to iron. It is an isolated displacement reaction between two metals. In the activity series, iron comes after copper.

To learn more about sulfur click here https://brainly.com/question/13469437

#SPJ4

Answer: Both resulted in color change, One involved chemical change while the other involved physical change.

Explanation:

B and E on edge.

Answer:

the answer is B. the energy required to go from a solid to liquid

B. The latent heat of fusion is the energy required to go from a solid to a liquid. It is the amount of heat energy that must be added to a substance at its melting point to convert it from a solid to a liquid, without changing its temperature.

Latent heat is the amount of heat energy required to change the phase of a substance without changing its temperature.

Option A describes the energy required to break molecular bonds, which is called the bond dissociation energy.

Option C describes the energy required to go from a solid to a gas, which is called the latent heat of sublimation.

Option D describes the energy required to go from a liquid to a gas, which is called the latent heat of vaporization.

Learn more about latent heat at:

https://brainly.com/question/28044951

#SPJ7

Explanation:

The issue of Pollution in our the oceans has changed the chemistry of water.

Drying and fermenting are two of the earliest techniques for food preservation. Replacement, recrystallization, permineralization, and unaltered

The term "preservation" refers to all of the procedures used to extend the useful life of archival records. The goal of preservation efforts is to stop information from being lost and to reduce physical and chemical deterioration of documents. You can manage the components in your food and consume healthy food all year round by canning, drying, and freezing.

The obvious goals of conservation are the protection of wildlife and the advancement of biodiversity. The animals we adore won't vanish into oblivion by being protected and preserved for future generations. And we can keep the ecosystem in good shape and working properly.

Learn more about preservation

https://brainly.com/question/29488142

The correct question is as follows

What are 6 types of preservations ?

There is no movement of heat. The Zeroth Law of Thermodynamics states that if two systems are in thermal equilibrium with a third system, then they are in thermal equilibrium with each other.

Thermodynamics is the study of energy and its transformations. It examines the relationships between heat, work, and other forms of energy. The fundamental laws of thermodynamics provide a framework for studying the behavior of systems, whether they are physical, chemical, or biological in nature. Thermodynamics helps us understand the behavior of gases, liquids, and solids and how they interact with each other. It also provides us with a way to analyze how energy is transferred and used in various processes.

In other words, no heat transfer takes place between two systems that are in thermal equilibrium.

To learn more about Thermodynamics
https://brainly.com/question/27386894
#SPJ4

0.0859 mol N2O5

Explanation:

First convert the # of grams of NO2 to moles:

7.90 g NO2 × (1 mol NO2/46.0055 g NO2)

= 0.172 mol NO2

Use the molar ratio to find the # moles of N2O5

0.172 mol NO2 × (2 mol N2O5/4 mol NO2)

= 0.0859 mol N2O5

When gas is removed from a container with a fixed volume, the number of gas particles decreases, so there are fewer collisions and thus less pressure.

Additionally, the remaining gas particles have more space to move around, which also leads to a decrease in pressure. This can be visualized in the drawing by the decrease in the number of gas particles and the increased distance between them as gas is removed from the container.

As the gas particles decrease, there are fewer particles to collide with the walls of the container and therefore less force is exerted on the walls. This results in a decrease in the pressure inside the container.

Read more about the behavior of gases:

https://brainly.com/question/13649307

#SPJ4

The average molecular velocity of the molecules will decrease as the reaction goes to completion at a constant temperature.

What is Molecular velocity?

Molecular velocity is the average speed of molecules in a sample of matter. It is determined by the temperature of the sample, with higher temperatures resulting in higher molecular velocities.

This is because the reaction produces a single product, meaning that the number of molecules in the reaction vessel is decreasing as the reaction goes to completion. As the number of molecules decreases, the average molecular velocity of the molecules decreases as well.

To know more about molecular velocity,

https://brainly.com/question/17031383

#SPJ4

Sodium chloride reacts with silver nitrate.  NaCl + AgNO3 → AgCl + NaNO3

intermolecular forces present in it.

The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.

Most of the physical and chemical features of matter are caused by intermolecular forces.

An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.

Learn more about Intermolecular forces  here:

https://brainly.com/question/9007693

#SPJ4