Need help please and thanks In advance

Answer:

First, let's calculate the potential energy stored in the spring:

PE = (1/2)kx²

where k is the spring constant and x is the distance the spring is compressed. Plugging in the given values, we get:

PE = (1/2)(600.0 N/m)(7.5 m)² = 16875 J

This potential energy is converted into kinetic energy as the roller coaster moves along the track. At the horizontal section, all of the potential energy has been converted into kinetic energy:

KE = (1/2)mv²

where m is the mass of the roller coaster and v is its velocity. Plugging in the given values, we get:

16875 J = (1/2)(205.0 kg)(6.0 m/s)²

Simplifying and solving for the vertical displacement, we get:

Δy = (KE/mg) - 7.5 m

where g is the acceleration due to gravity. Plugging in the values, we get:

Δy = [(1/2)(205.0 kg)(6.0 m/s)²/(205.0 kg)(9.81 m/s²)] - 7.5 m

Δy = 8.47 m

Therefore, the roller coaster is 8.47 meters above the starting level at the second (flat) level.

Explanation:

Answer:

the beta particle has the same mass and charge as electron.it differs from the electron in its origin

For the second spanner, the torque is: Torque = 20 N x 10 cm = 200 N.cm Therefore, the first spanner produces the greatest torque.

The torque applied to the fastener rises as the lever arm extends when a torque wrench with an extension (such as a crow foot or a dog bone) is used. The calculator will determine what setting you need to make on the wrench to attain the necessary fastener torque. M1 = M2 x L1 / L2 has been used as the solution.

We must apply the algorithm to determine the torque generated by each spanner:

Force x perpendicular separation from the centre point equals torque.

Assuming that each spanner's pivot point is in its center, the perpendicular distance from the pivot to the spot at which the force is applied is equal to half of the spanner's length.

For the first spanner, the torque is:

Torque = 30 N x 7.5 cm = 225 N.cm

For the second spanner, the torque is:

Torque = 20 N x 10 cm = 200 N.cm

Therefore, the first spanner produces the greatest torque.

To know more about torque visit:-

https://brainly.com/question/29024338

#SPJ1

The balloon has a 4.51 m³ volume. The balloon will undergo an initial acceleration of 0.551 m/s².

Buoyant force = Helium density x V x g

(Mass of balloon plus Mass of Load) x g = Weight of Displaced Air

V is equal to (balloon mass plus load mass) / helium density.

V is equal to (1.5 kg + 750 N / 9.81 m/s²) / 0.1785 kg/m3 = 4.51 m³.

Net force is equal to (helium density x 2V x g) - (balloon Plus load) x g.

Net force = 112.79 N a = F / m = (750 N + 900 N + 1.5 kg x 9.81 m/s²) = 0.551 m/s²

To learn more about volume visit:

brainly.com/question/14959804

#SPJ1

The graph of the resistors and the colors of the resistors are presented as follows;

Q1. a) Line A represents R₁, B represents R₃, and C represents R₂

b) The line of the equivalent  will be lower than C

c) Brown, green, black and gold

The resistance of a resistor is; R = V/I

V = The voltage across the resistor, and I is the current through the resistor.

Q1. R₁ = 3.13 kΩ, R₂ = 0.52 kΩ, and R₃ = 1.59 kΩ

a) The potential difference, or voltage V = I·R, where;

I = The current

R = The value of the resistor

The slope is therefore, directly proportional to the resistance of the resistor. Therefore, the resistor that the line A in Figure 1 (b) in the question represents is the highest value resistor, which is R₁ = 3.13 kΩ

The resistor that the line B represents is R₃ = 1.59 kΩ

The resistor that the line C represents is R₂ = 0.52 kΩ

b) The value of Requiv can be found as follows;

1/Requiv = 1/R₁ + 1/R₂ + 1/R₃

Therefore;

1/Requiv = 1/3.13 + 1/0.52 + 1/1.59

Therefore; Requiv ≈ 0.348 Ω

Therefore, the line in Figure 1 (b) representing Requiv will be lower than the line C

c) The obtain the four colors of resistor R₃, we need to calculate its value in ohms. Using the values R₃ = 1.36 kΩ and R₃ = 1.61 kΩ, the average value of R₃ can be calculated as follows;

(R₃₁ + R₃₂)/2 = (1.36 + 1.61)/2 = 1.485

The average value of R₃ is therefore, 1.485 kΩ

The colors of R₃ are therefore; brown, green, black, and gold, where, the first two bands represent the significant digits of the resistance value, the third band represent the multiplier, and the fourth band represent the tolerance value.

Learn more on the calculation of the resistance of a resistor here: https://brainly.com/question/30184452

#SPJ1

The pelvis in humans serves a functional purpose by supporting the upper body and attaching it to the lower body. Other vestigial structures in humans include ear muscles, tail bone, and hair raising.

As humans evolved, the pelvis became increasingly important in supporting the weight of the upper body and allowing for efficient movement of the legs. In fact, the shape of the pelvis is one of the key factors that distinguishes humans from other primates, as it evolved to accommodate the unique demands of bipedalism. However, not all structures in the human body are as essential as the pelvis. Some, like the ear muscles and tail bone, have lost their original function over time. The ear muscles, for example, were once used to orient the ears towards sounds, but are no longer functional in most humans. Similarly, the tail bone, or coccyx, is a vestige of the tail that our primate ancestors once had, but which no longer serves any purpose in humans. Other vestigial structures in humans include the appendix, which may have once been used to digest a more plant-based diet, and the ability to raise our hair, which was likely used to intimidate predators but now only causes goosebumps.

Despite their lack of function, these vestigial structures continue to exist in humans due to their evolutionary history. And while they may not be essential to our survival, they serve as a reminder of our evolutionary past and the many adaptations that have made us the unique species we are today.

To know more about vestigial structures please refer: https://brainly.com/question/30458968

#SPJ1

The cyclist will be moving with a velocity of 6.12m/s when she reaches the end of the patch which is 290cm long.

Given the speed of cyclist initially (u) = 5m/s

The length of rough horizontal patch of the road (s) = 290cm = 2.9m

The coefficient of kinetic friction of road with her tyres (μ) = 0.220

The frictional force acting on the cyclist f = μN = ma where a is the acceleration acting on the cyclist.

Then f = 0.220 * N

0.220 * m * g = m * a

a = 2.156m/s^2

From Newtons laws of motion we know that :

[tex]v^2 - u^2 = 2as[/tex] where v is the final velocity such that:

[tex]v^2 - (5)^2 = 2 * 2.156 * 2.9[/tex]

[tex]v^2 = 12.5048 + 25 = 37.5048[/tex]

[tex]v = \sqrt{37.5048} = 6.12m/s[/tex]

Hence the final velocity of the cyclist is 6.12m/s

To learn more about kinetic friction click here https://brainly.com/question/30886698

#SPJ1

Answer:

0.4166666667 m/s

Explanation:

Answer:

I mean 25 kg of course.

Explanation:

If you filled the bucket it is 25 liters. The density of water is about 1 kg/liter so about 1 kg

The total translational kinetic energy of 1 L of oxygen gas at 6°C and 2.5 atm is 833.7 J.

To find the total translational kinetic energy of 1 L of oxygen gas at 6°C and 2.5 atm, we can use the following formula:

KE = (3/2) * n * R * T

where KE is the total translational kinetic energy, n is the number of moles of gas, R is the gas constant (8.314 J/(mol*K)), and T is the temperature in Kelvin.

First, we need to find the number of moles of gas in 1 L at 2.5 atm and 6°C. We can use the ideal gas law to do this:

PV = nRT

where P is the pressure, V is the volume, and T is the temperature in Kelvin.

Converting 6°C to Kelvin, we get:

T = 6°C + 273.15 = 279.15 K

Substituting the given values into the ideal gas law, we get:

(2.5 atm) * (1 L) = n * (0.08206 Latm/(molK)) * (279.15 K)

Solving for n, we get:

n = (2.5 atm * 1 L) / (0.08206 Latm/(molK) * 279.15 K) = 0.108 mol

Now we can use the formula for KE:

KE = (3/2) * n * R * T = (3/2) * (0.108 mol) * (8.314 J/(mol*K)) * (279.15 K)

Solving for KE, we get:

KE = 833.7 J.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ1

The mass density of the violin A4 string should be approximately 1800 kg/m^3.

The mass density of a string can be calculated using the following formula:

ρ = T / ((π/4) * d^2 * L)

where:

ρ is the mass density of the string in kg/m^3

T is the tension in Newtons (N)

d is the diameter of the string in meters (m)

L is the length of the string in meters (m)

π is the mathematical constant pi, approximately equal to 3.14159

We are given the length of the violin A4 string (L = 0.35 m) and the tension on the string (T = 60 N). We are asked to find the mass density of the string (ρ).

The diameter of the string (d) is not given, so we cannot solve for it directly. However, we can make an assumption about the diameter based on typical values for violin strings.

A common diameter for a violin A4 string is 0.6 mm, or 0.0006 m. We will use this value for d.

Now we can solve for ρ:

ρ = T / ((π/4) * d^2 * L)

ρ = 60 N / ((π/4) * (0.0006 m)^2 * 0.35 m)

ρ ≈ 1800 kg/m^3

Therefore, the mass density of the violin A4 string should be approximately 1800 kg/m^3.

What is mass density?

Mass density, also known as density, is a measure of how much mass is contained within a given volume of a substance. It is usually denoted by the Greek letter rho (ρ) and is expressed in units of kilograms per cubic meter (kg/m^3) or grams per cubic centimeter (g/cm^3).

To know more about mass density, visit:

https://brainly.com/question/6107689

#SPJ1

F = K ( | q1 × q2 | ) / r² is the formula you need

convert the value of the charge to the SI system by multiplying with 10^-6

so the task probably gives you coulombs constant but im gonna assume it's K= 9 × 10⁹ Nm²/C² because thats the common way to use it

so we have

F = 9 × 10⁹ ( 7 × 10^-6 × 2 × 10^-6)/ 0.02²

F = 315 N

so i guess the answer is B because your task must give you K=9. something × 10⁹

hope this helps, sorry if i dont make sense

Answer B is correct because the net electrostatic force on q2 is 314.65 N to the left.

In light of the fact that both the charge q1 and the other charge q2 are equal to zero. According to the equation, one charge is positive and the other is negative. Both charges are of similar size. This indicates that the two supplied charges on the system will add up to a total charge of zero.

[tex]F = k * |q1| * |q2| / r^2[/tex]

[tex]F = 9 x 10^9 * 7 x 10^-6 * 2 x 10^-6 / (0.02)^2[/tex]

[tex]F ≈ 314.65 N to the left[/tex]

To know more about electrostatic visit:-

https://brainly.com/question/31042490

#SPJ1

We can use Coulomb's Law to calculate the force exerted on the charge -q at the center of the hexagon by each of the five +q charges. The force exerted by a single charge is given by:

F = k * (q1*q2)/r^2

where,

k = Coulomb's constant

q1 and q2= charges of the two particles

r = distance between charges

Since all the +q charges are equidistant from the -q charge at the center of the hexagon, the magnitude of the force exerted by each charge is the same.

Let's call this force F1.

Angle between any two adjacent charges in the hexagon =60 degrees, so the force vector between each pair of charges is directed along a line connecting them and points towards the -q charge at the center.

Since there are five charges, the total force on the -q charge is the vector sum of the forces exerted by each charge. We can find the magnitude of this resultant force using the law of cosines:

F^2 = (5F1)^2 + (5F1)^2 - 2*(5F1)(5*F1)*cos(120)

Simplifying this equation gives:

F = sqrt(75)*F1

Distance between the center of the hexagon and each of the five charges= l,

and the charges are all +q, so we have:

F1 = k*q^2/l^2

Substituting this into the previous equation gives:

F = sqrt(75)kq^2/l^2

Therefore, the magnitude of the resultant force on the -q charge at the center of the hexagon is:

|F| = sqrt(75)kq^2/l^2

where k is Coulomb's constant, q is the charge of each particle, and l is the side length of the regular hexagon.

Read more about coulombs law on

https://brainly.com/question/26892767

The total surface area of S that is the boundary of solid between Z=0 and Z=X²​ is given as :

∬S dS = ∫0^2π ∫0^1 tanθ √(1 + cos²θ) dr dθ + ∫0^1 ∫0^2π √(z) / cosθ dθ dz

Applying the surface integral formula:

∬S dS

where S = surface of the solid,

dS = surface area element.

We  can use the cylindrical coordinates  to parameterize the surface S (r, θ, z).

The surface S consists of two parts:

For the top surface,

z = X² = r²cos²θ, so r = sinθ/cosθ = tanθ.

The surface element is given by dS = r dθ dr = tanθ dr dθ.

For the curved surface,

z = X² = r²cos²θ, so r = √(z/cos²θ).

The surface element is  dS = r dθ dz = √(z) / cosθ dθ dz.

In conclusion, the total surface area of S is:

∬S dS = ∫0^2π ∫0^1 tanθ √(1 + cos²θ) dr dθ + ∫0^1 ∫0^2π √(z) / cosθ dθ dz

Learn more about surface integral formula at:

https://brainly.com/question/28171028

#SPJ1

Answer:

4618.9N

Explanation:

We need to start of by calculating the Gravitational Force (acceleration) of the Earth (IF it was the same size as the moon) which is showed as follows:

[tex]g = \frac{GM}{r^2}[/tex] where g is the gravitational acceleration, G is the gravitational constant (6.673 × [tex]10^{-11}[/tex] Nm^2kg^-2), M is the mass of the planet, r is the radius of the planet.

Substituting the values as given in the question,

[tex]g = \frac{6.673 * 10^{-11} * 4 * 10^{24}}{(1.7*1000 * 1000)^2}\\\\= \frac{26.69200 * 10^{13}}{2890000000000}\\\\\\= 92.3598615917 N/kg[/tex]

Hence, the gravitational force is 92.4N/kg (or m/s^2).

Considering this,

50 * 92.4 = 4618.89N ≈ 4618.9N

Hope this helps and be sure to mark this as brainliest! :)

The magnitude of the force on the barge from the water is approximately 18497 N.

Mass is a measure of the amount of matter in an object. It is a scalar quantity that is usually measured in units of kilograms (kg) or grams (g). Mass is different from weight, which is the force that gravity exerts on an object with mass.

Here, F(horse) is the force applied by the horse, F(water) is the force on the barge from the water, and the x and y axes are chosen such that the motion is along the x-axis and the force from the water is along the y-axis.

[tex]$\rm \Sigma F_x = F_{horse,x} = F_{water}$[/tex]

And substituting the x and y components of the forces, we get:

[tex]$ \rm F_{horse}\cos(8^{\circ}) = m a\sin(15^{\circ})$[/tex]

Solving for [tex]$ \rm F_{water}$[/tex], we get:

[tex]$ \rm F_{water} = \dfrac{F_{horse}\cos(8^{\circ})}{\sin(15^{\circ})}$[/tex]

Substituting the given values, we get:

[tex]$\rm F_{water} = \dfrac{7920 N \cdot \cos(8\°)}{\sin(15\°)} \approx 18497 N$[/tex]

Learn more about Mass from the given link

brainly.com/question/86444

#SPJ1

Answer:

open system

Explanation:

open system freely exchange and matter with the surrounding

Name: Bubble Blitz

Goals and Playthrough: Bubble Blitz is a fast-paced game in which players race against time to pop as many bubbles as possible. The game's objective is to pop as many bubbles as possible to score as many points as possible.

Scoring: One point is awarded for popping each bubble. The player with the highest score wins the game at the end.

Required equipment: A large open area and either a bubble machine or a container filled with soapy water are required for Bubble Blitz.

The number of team members: You can play Bubble Blitz by yourself or in teams of two or more.

Abilities required: To pop the bubbles as they appear in Bubble Blitz, players must have strong hand-eye coordination and quick reflexes.

To know more about Hand-eye Coordination, visit:

https://brainly.com/question/12473969

#SPJ1

Around 8.82 m/s of starting horizontal velocity is needed to just barely clear the shelf's edge. Around 8.99 metres from the base of the second cliff, the rock will land.

By multiplying the ball's diameter (d) by the amount of time (t) required for it to travel through the photogate, one may calculate the initial horizontal velocity of the object. Vo therefore equals d/t.

We can get the initial velocity necessary to raise the boulder to a height of 5 m using the kinematic equation:

Δy = V_iy*t + (1/2)a_yt²

We can find this time using the equation:

Δy = (1/2)a_yt²

where Δy = 5 m and a_y = 9.8 m/s².

Solving for t, we get:

t = sqrt(2Δy/a_y) = sqrt(25/9.8) ≈ 1.02 s

The initial horizontal velocity can be calculated using the rock's horizontal distance, time, and the equation: x = V ix*t, where x = 9 m and V ix represents the initial horizontal velocity.

Solving for V_ix, we get:

V_ix = Δx/t = 9/1.02 ≈ 8.82 m/s

B) Given that the rock has the same beginning vertical velocity and acceleration due to gravity, the time it takes to fall from the second cliff to the canyon's bottom is also around 1.02 s. The rock will move horizontally over the following distance:

Δx = V_ixt = 8.821.02 ≈ 8.99 m

To know more about velocity visit:-

https://brainly.com/question/14611467

#SPJ1

The value of C₂ is approximately 9.53 microfarads.

Using the conservation of charge, we can say that the total charge on the two capacitors before and after they are connected is the same.

The initial charge on the first capacitor, Q₁, can be calculated as:

Q₁ = C₁ * V

where V is the voltage of the battery (125 V).

When the two capacitors are connected in series, they have the same charge, so the charge on each capacitor is Q = Q₁ = C₁ * V.

The final voltage on each capacitor can be calculated using the formula for capacitors in series:

1/Ceq = 1/C1 + 1/C2

where Ceq is the equivalent capacitance of the two capacitors.

The final voltage on each capacitor is given as 15 V, so we can write:

Q = Ceq * Vf

where Vf is the final voltage on each capacitor (15 V).

Substituting Q = C₁ * V into the above equation and solving for C₂, we get:

C₂ = (C₁ * Vf) / (V - Vf)

Substituting the given values, we get:

C₂ = (7.7 × 10^-6 F × 15 V) / (125 V - 15 V) ≈ 9.53 × 10^-6 F

Therefore, the value of C₂ is approximately 9.53 microfarads.

What is capacitor?

A capacitor is an electrical component that stores electric charge and energy in an electric field between two conductive plates. It consists of two parallel conductive plates separated by an insulating material called a dielectric. When a voltage is applied to the capacitor, it charges up by accumulating electric charges on the two plates, with one plate becoming positively charged and the other negatively charged.

To know more about capacitor, visit:

https://brainly.com/question/29100869

#SPJ1

Please, for the sake of clarity on the solution to the question on calculating the potential V(r) of the metal sphere, let's go ahead with the step by step explanation as shown below.

To calculate the potential V(r) at a distance r from the center of the spheres, we need to consider two cases:

In this case, the point is inside the inner sphere and the potential is simply the potential due to the inner sphere, which can be calculated using the formula:

V_inner(r) = k * q / ra

where k is the Coulomb constant (k = 1/4πε0) and ε0 is the electric constant.

In this case, the point is between the two spheres and the potential is the sum of the potentials due to the inner and outer spheres. The potential due to the outer sphere can be calculated using the same formula as above:

V_outer(r) = - k * q / rb

Note that the negative sign indicates that the potential due to the outer sphere is negative since it has a negative charge.

Therefore, the total potential at this point is:

V(r) = V_inner(r) + V_outer(r)

= k * q / ra - k * q / rb

In this case, the point is outside both spheres and the potential is simply due to the outer sphere, which is:

V_outer(r) = - k * q / r

So the total potential at this point is:

V(r) = V_outer(r)

= - k * q / r

Therefore, the potential V(r) as a function of the distance r from the center of the spheres is:

V(r) = { k * q / ra - k * q / rb if ra < r < rb

{ - k * q / r if r > rb

where k is the Coulomb constant, q is the charge on the inner sphere, ra is the radius of the inner sphere, and rb is the radius of the outer spherical shell. Note that we have taken the potential to be zero when the distance r from the center of the spheres is infinite.

Learn more on potential V(r) here https://brainly.com/question/29834673

#SPJ1

It follows that the energy held in the bank, 1 2 Q V, must equal the work done in dividing the plates from close to zero to d. E=V/d is the formula for electromagnetic current between the plates.

In physics, what is energy?

Energy is the ability to perform work in physics. It could exist in several different forms, such as dynamic, kinetic, heat, electrical, chemical, radioactive, etc. Moreover, there is heat and work, which is energy being transferred from one thing to the other. Energy is always assigned based on its nature after being transferred.

How does heat energy work?

Heat is the qualitative property in physics that needs to be delivered to a body or technical process in order to do work on it or to heat it. Energy can be transformed in form but cannot be created or destroyed, according to the rule of conservation of energy.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ9

Answer: Both static and kinetic coefficients of friction depend on the pair of surfaces in contact. Their values are determined experimentally. For a given pair of surfaces, the coefficient of static friction is larger than the kinetic friction. The coefficient of friction depends on the materials used.

Explanation:

the coefficient of static friction is larger than the kinetic friction.

Answer:

The coefficient of kinetic friction and the coefficient of static friction are both affected by the area of contact between two surfaces in contact. The following is a detailed explanation of how the values of these coefficients are affected by the area of contact.

The coefficient of kinetic friction is defined as the ratio of the force required to maintain a constant velocity between two surfaces in contact to the normal force pressing them together. It is a measure of the resistance to motion between two surfaces in contact. The coefficient of kinetic friction is affected by several factors, including the nature of the surfaces in contact, their roughness, and their temperature. However, the area of contact between two surfaces also plays a crucial role in determining the coefficient of kinetic friction.

The larger the area of contact between two surfaces, the greater the frictional force acting between them. This is because a larger area of contact means that there are more points of interaction between the two surfaces, which leads to a greater number of intermolecular forces acting between them. As a result, it becomes more difficult to maintain a constant velocity between two surfaces with a larger area of contact, and hence, the coefficient of kinetic friction increases.

On the other hand, the coefficient of static friction is defined as the ratio of the maximum force required to initiate motion between two surfaces in contact to the normal force pressing them together. It is a measure of the resistance to motion when an object is at rest on a surface. Like the coefficient of kinetic friction, it is also affected by several factors including surface roughness and temperature. However, unlike the coefficient of kinetic friction, it is not affected significantly by changes in area of contact.

This is because when an object is at rest on a surface, it does not matter how much area it covers on that surface. The maximum force required to initiate motion remains constant regardless of whether an object has a small or large area in contact with another surface. Therefore, changes in area of contact do not significantly affect the coefficient of static friction.

The correct answer is The Big Five personality traits are Openness, Conscientiousness, Extraversion, Agreeableness, and Neuroticism. Each trait can be categorized as either high or low, resulting in 32 different combinations of the Big Five.

The combination of Low Openness, High Conscientiousness, Low Extraversion, High Agreeableness, and Low Neuroticism would suggest a person who is practical, detail-oriented, reserved, cooperative, and emotionally stable. While it is possible to speculate about how a person with this personality profile might behave in various situations, it is important to note that personality traits are not deterministic, and many other factors (such as culture, upbringing, and life experiences) can shape an individual's behavior. It is possible to rate politicians, movie stars, and other famous people on the Big Five using self-report questionnaires, behavioral observations, and other methods. However, it is important to keep in mind that such ratings may be influenced by personal biases and perceptions, and should be interpreted with caution. Additionally, the accuracy of such ratings depends on the quality and validity of the assessment tools used, as well as the rater's expertise and training in personality assessment.

To learn more about Conscientiousness,  click on the link below:

brainly.com/question/30257990

#SPJ1

The change of the potential energy of gravitation, ΔPEg, is ΔPEg = expresses the notion, with h being the rise in height with g the acceleration caused by gravity.

A doubling in height will lead to a doubling in gravitational potential energy since an object's gravitational potential energy is directly proportionate to its height above the zero point. Its gravitational potential energy will triple with a tripling of height.

Potential energy changes are identical to kinetic energy changes by definition. As the object is at rest, its initial KE is 0. As a result, the ultimate Kinetic Energy is the same as the KE change.

To know more about acceleration visit:
https://brainly.com/question/12550364

#SPJ1