The average force acted on the car during the deceleration is 7500 N.The car traveled a distance of 60 meters during the deceleration.The block does not start to move because the applied force is not sufficient to overcome the static friction.
To find the mass of a person given their weight, we use the equation weight = mass × gravity, where weight is given as 745 N. Solving for mass, we have mass = weight / gravity. Assuming standard gravity of 9.8 m/s², the mass is approximately 75.7 kg. To find the weight of a mass, we use the equation weight = mass × gravity, where mass is given as 8.20 kg. Plugging in the values, we have weight = 8.20 kg × 9.8 m/s², which gives a weight of approximately 80.2 N.
2a. To find the average force acting on the car during deceleration, we use Newton's second law, which states that force = mass × acceleration. The change in velocity is 20.0 m/s - 5.00 m/s = 15.0 m/s, and the time is given as 4.00 seconds. The acceleration is calculated as change in velocity / time, which is 15.0 m/s / 4.00 s = 3.75 m/s². Plugging in the mass of 2000 kg and the acceleration, we have force = 2000 kg × 3.75 m/s² = 7500 N.
2b. To determine the distance the car traveled during deceleration, we can use the equation of motion x = x₀ + v₀t + 0.5at². Since the car is slowing down, the final velocity is 5.00 m/s, the initial velocity is 20.0 m/s, and the time is 4.00 seconds. Plugging in these values and using the equation, we get x = 0 + 20.0 m/s × 4.00 s + 0.5 × (-3.75 m/s²) × (4.00 s)² = 60 meters.
To determine if the block starts to move, we need to compare the applied force to the maximum static friction. The equation for static friction is fs ≤ μs × N, where fs is the force of static friction, μs is the coefficient of static friction, and N is the normal force. The normal force is equal to the weight of the block, which is given as 38.4 pounds. Converting the weight to Newtons, we have N = 38.4 lb × 4.45 N/lb = 171.12 N. Plugging in the values, we have fs ≤ 0.75 × 171.12 N. Since the applied force is 21.3 pounds, which is less than the maximum static friction, the block does not start to move.
Learn more about static friction here:
https://brainly.com/question/17140804
#SPJ11
A block with a mass m is floating on a liquid with a mass density p. The block has a cross-sectional area A and height L. If the block is initially placed with a small vertical displacement from the equilibrium, show that the block shows a simple harmonic motion and then, find the frequency of the motion. Assume uniform vertical gravity with the acceleration g.
When a block with mass 'm' is floating on a liquid with mass density 'p,' and it is displaced vertically from its equilibrium position, it undergoes simple harmonic motion. Thus, the frequency of the block's motion is given by f = √(p * g * A / (4π^2 * m)).
The frequency of this motion can be determined by considering the restoring force provided by the buoyant force acting on the block.
When the block is displaced vertically, it experiences a buoyant force due to the liquid it is floating on. This buoyant force acts in the opposite direction to the displacement and acts as the restoring force for the block. According to Archimedes' principle, the buoyant force is equal to the weight of the liquid displaced by the block, which can be calculated as p * g * A * L, where 'g' is the acceleration due to gravity.
The restoring force is given by F = -p * g * A * L, where the negative sign indicates that it opposes the displacement.
Applying Newton's second law, F = m * a, we can equate the restoring force to the mass of the block multiplied by its acceleration. Since the acceleration is proportional to the displacement and has an opposite direction, the block undergoes simple harmonic motion.
Using the equation F = -p * g * A * L = m * a = m * (-ω^2 * x), where 'x' is the displacement and ω is the angular frequency, we can solve for ω. Rearranging the equation gives ω = √(p * g * A / m). The frequency 'f' can be obtained by dividing the angular frequency by 2π: f = ω / (2π). Thus, the frequency of the block's motion is given by f = √(p * g * A / (4π^2 * m)).
Learn more about simple harmonic motion:
https://brainly.com/question/30404816
#SPJ11
An astronaut drops an object of mass 3 kg from the top of a cliff on Mars, 3 and the object hits the surface 8 s after it was dropped. Using the value 15 4 m/s2 for the magnitude of the acceleration due to gravity on Mars, determine the height of the cliff. 240 m 180 m 320 m 120 m 160 m 60 m
The height of the cliff on Mars from which the object was dropped can be determined using the given information. The correct answer is option 3: 320 m.
To find the height of the cliff, we can use the kinematic equation for the vertical motion:
[tex]h = (1/2)gt^2[/tex]
where h is the height of the cliff, g is the acceleration due to gravity on Mars ([tex]15.4 m/s^2[/tex]), and t is the time taken for the object to hit the surface (8 s).
Plugging in the values,
[tex]h = (1/2)(15.4 m/s^2)(8 s)^2h = (1/2)(15.4 m/s^2)(64 s^2)\\h = (492.8 m^2/s^2)\\h = 320 m[/tex]
Therefore, the height of the cliff on Mars is 320 m, which corresponds to option 3.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
A motorcyclist is making an electric vest that, when connected to the motorcycle's 12 V battery, will warm her on cold rides. She is using 0.23−mm-diameter copper wire, and she wants a current of 4.8 A in the wire. For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution. A 15μF capacitor initially charged to 25μC is discharged through a 1.0kΩ resistor. Part A How long does it take to reduce the capacitor's charge to 10μC ?
It takes approximately 18.97 ms for the capacitor's charge to be reduced to 10 μC.
A 15 μF capacitor initially charged to 25 μC is discharged through a 1.0 kΩ resistor. The steps and strategies involved in solving this similar problem are given below:
where q = charge on capacitor at time t, Q = initial charge on the capacitor, R = resistance, C = capacitance, and e = 2.71828 (constant)
To find the time it takes to reduce the capacitor's charge to 10 μC, substitute the given values in the above equation, q = 10 μC, Q = 25 μC, R = 1.0 kΩ, C = 15 μF.
Then solve for t.t = - RC ln(q/Q)=- (1.0 kΩ) (15 μF) ln(10 μC/25 μC)t = 18.97 ms
Therefore, it takes approximately 18.97 ms for the capacitor's charge to be reduced to 10 μC.
To learn about capacitors here:
https://brainly.com/question/30529897
#SPJ11
A proton is about 2000 times more massive than an electron. Is it possible for an electron to have the same de Broglie wavelength as a proton? If so, under what circumstances will this occur? If not, why not? (conceptual
The de Broglie wavelength of a particle is given by the equation:
λ = h / p, where λ is the de Broglie wavelength, h is the Planck constant, and p is the momentum of the particle.
The momentum of a particle is given by:
p = mv
where m is the mass of the particle and v is its velocity.
Since the mass of a proton is about 2000 times greater than the mass of an electron, the velocity of the proton would need to be 2000 times smaller than the velocity of the electron in order for them to have the same momentum.
However, the velocity of an electron in an atom is primarily determined by its energy levels and the electrostatic forces within the atom. The velocity of a proton, on the other hand, would be influenced by different factors in a different context.
Therefore, under normal circumstances, it is not possible for an electron and a proton to have the same de Broglie wavelength because their masses and velocities are determined by different physical processes.
To learn more about de Broglie wavelength visit:
brainly.com/question/30404168
#SPJ11
A gas expands from an initial state A to a final state B. The expansion process consists of two stages. First the gas expands at constant pressure from 20 litres to 42 litres. Second the gas expands from 42 litres to 88 litres with a pressure drop according to the equation P = (100 - 0.8 V) kPa, where V is in litres. Calculate the work done on the gas. [Note that you need to calculate the initial pressure, which is not 100kPa.] a.-3889 J O b.-3669 J O c.-4199 J O d. -4039 J O e. 3539 J
The work done on the gas during the expansion process can be calculated by integrating the pressure with respect to the volume over each stage of the process. The total work done on the gas is approximately -3669 J.
To calculate the work done on the gas, we need to determine the pressure as a function of volume for each stage of the expansion process.
In the first stage, the gas expands at constant pressure. Since we know the initial and final volumes, we can calculate the constant pressure using the ideal gas law: PV = nRT. Given that the initial volume is 20 liters and the final volume is 42 liters, we have P₁ * 20 = nRT and P₂ * 42 = nRT, where P₁ and P₂ are the pressures at the initial and final states, respectively. Dividing the second equation by the first equation, we can solve for P₂/P₁ and find P₂ = 2.1P₁.
In the second stage, the pressure is given by the equation P = (100 - 0.8V) kPa. We can integrate this equation with respect to volume to find the work done during this stage.
The total work done on the gas is the sum of the work done in each stage. By integrating the pressure-volume relationship over each stage and summing the results, we find that the total work done on the gas is approximately -3669 J.
Learn more about work done here:
https://brainly.com/question/2750803
#SPJ11
If space-based telescopes have so many advantages over ground-based telescopes, why are most professional class telescopes located on Earth? For most wavelengths, there is no real advantage of a space
Most professional-class telescopes are located on Earth, despite the many advantages that space-based telescopes offer, for a few reasons. One reason is the cost.
Building and launching a space-based telescope is much more expensive than constructing a ground-based telescope. Additionally, it is easier to maintain and repair a ground-based telescope, and new technology can be more easily installed. Furthermore, while space-based telescopes are better at detecting certain wavelengths of light, for most wavelengths there is no real advantage of a space telescope over a ground-based one.
Professional-class telescopes have enabled scientists to study the cosmos, learn more about the universe and how it came to be. Although space-based telescopes have numerous advantages, most of the professional-class telescopes are located on earth. The main reason is the cost of constructing and launching a space-based telescope, which is far more expensive than a ground-based one.
Ground-based telescopes, on the other hand, are cheaper and more accessible to astronomers. Moreover, ground-based telescopes are easy to maintain, repair and install new technology compared to space-based telescopes. The research and development of ground-based telescopes also enjoy the benefits of well-established technology. While space-based telescopes have advantages in detecting certain wavelengths of light, for most wavelengths there is no advantage to using a space telescope.
Although space-based telescopes have many advantages over ground-based telescopes, cost is one of the key reasons why most professional-class telescopes are located on earth.
To know more about wavelengths :
brainly.com/question/31143857
#SPJ11
The invisibility cloak from the Harry Potter books would be based on: An index of refraction that is exactly zero. An index of refraction that is between 0 and 1 An index of refraction that is greater than 2.5 A negative index of refraction
The invisibility cloak from the Harry Potter books would be based on a negative index of refraction.
In the Harry Potter books, the invisibility cloak allows the wearer to become completely invisible. Such an effect would require a material with unique optical properties. One possibility is a negative index of refraction.
In optics, the refractive index determines how light propagates through a medium. Normally, the refractive index of a material is positive, meaning light bends towards the normal when it enters the medium. However, a material with a negative refractive index would cause light to bend in the opposite direction, allowing it to curve around an object and effectively render it invisible. This concept is known as "invisibility cloaking" and has been a topic of scientific research. While achieving a true negative refractive index in practice is challenging, the invisibility cloak in the Harry Potter books is based on this idea, allowing the wearer to hide from view.
Learn more about index of refraction:
https://brainly.com/question/30761100
#SPJ11
A car travelling in a straight-line path has a velocity of +10.0 m/s at some instant. After 7.00 s, its velocity is +9.00 m/s. What is the average acceleration of the car during this time interval?
The average acceleration of the car during the given time interval is -0.14 m/s².
The given information are: Initial velocity (u) = +10.0 m/s Final velocity (v) = +9.00 m/s Time interval = 7.00 s. To calculate the average acceleration of a car during the given time interval, the formula is used below: Average acceleration, a = (v - u) / t Where, v is the final velocity, u is the initial velocity and t is the time interval. Substituting the given values: Average acceleration, a = (9.00 - 10.0) / 7.00a = -1.00 / 7.00
Learn more about average acceleration:
https://brainly.com/question/104491
#SPJ11
An arrow is shot from a height of 1.3 m toward a cliff of height H. It is shot with a velocity of 25 m/s at an angle of 60° above the horizontal. It lands on the top edge of the cliff 3.4 s later.
(a)
What is the height of the cliff (in m)?
m
(b)
What is the maximum height (in m) reached by the arrow along its trajectory?
m
(c)
What is the arrow's impact speed (in m/s) just before hitting the cliff?
m/s
(a) The height of the cliff is determined by the calculated value of H.(b) The maximum height reached by the arrow is given by H_max.(c) The impact speed of the arrow just before hitting the cliff is equal to v₀x.
(a) To find the height of the cliff, we can use the equation of motion in the vertical direction. The vertical displacement of the arrow is equal to the height of the cliff. The equation is given by:H = (v₀y × t) - (1/2) × g × t²,where v₀y is the vertical component of the initial velocity, t is the time of flight, and g is the acceleration due to gravity. In this case, v₀y = v₀ × sin(θ), where v₀ is the initial velocity and θ is the launch angle.
(b) The maximum height reached by the arrow can be calculated using the formula:H_max = (v₀y²) / (2g).(c) The impact speed of the arrow just before hitting the cliff can be found using the horizontal component of the velocity, which remains constant throughout the motion. The impact speed is given by:v_impact = v₀x,where v₀x is the horizontal component of the initial velocity.By plugging in the given values into the equations, we can calculate the height of the cliff, the maximum height reached by the arrow, and the impact speed.
Therefore, the answers to the questions are:(a) The height of the cliff is determined by the calculated value of H.(b) The maximum height reached by the arrow is given by H_max.(c) The impact speed of the arrow just before hitting the cliff is equal to v₀x.The specific numerical values for the height of the cliff, maximum height, and impact speed can be calculated by substituting the given values into the equations.
Learn more about impact speed here:
https://brainly.com/question/30328110
#SPJ11
A 4.0-kg mass attached to a spring oscillates in simple harmonic motion according to the expression e(t) = (15cm) cos (rad|s) + (7/3)rad). The time required for the mass to undergo two complete oscillations is: (a) 10.1 s (b) 5.03 s (c) 2.51 s (d) 1.26 s The maximum acceleration of the mass is: (a) 0.75 m/s2 (b) 3.75 m/s2 (c) 5.00 m/s2 (d) 25.0 m/s2
The value of the dielectric constant of the unknown material is approximately 1.037.
To calculate the value of the dielectric constant of the unknown material, we can use the concept of capacitance and the parallel plate capacitor equation.
The capacitance of a parallel plate capacitor is given by the formula:
C = (ε₀ * εr * A) / d
where C is the capacitance, ε₀ is the permittivity of free space (8.85 x 10^-12 F/m), εr is the relative permittivity (dielectric constant) of the material between the plates, A is the area of each plate, and d is the distance (gap) between the plates.
C = 95 pF = 95 x 10^-12 F
A = 110 cm^2 = 110 x 10^-4 m^2
d = 3.25 mm = 3.25 x 10^-3 m
We need to find the dielectric constant εr of the unknown material.
We can rearrange the formula to solve for εr:
εr = (C * d) / (ε₀ * A)
Substituting the given values:
εr = (95 x 10^-12 F * 3.25 x 10^-3 m) / (8.85 x 10^-12 F/m * 110 x 10^-4 m^2)
εr ≈ 1.037
To know more about relative permittivity
https://brainly.com/question/29288724
#SPJ11
The four drawings show portions of a long straight wire carrying current, I, in the presence of a uniform magnetic field directed into the page. In which case or cases does the wire feel a force to the left?
Using the right-hand rule, the direction of the force is downwards.Therefore, the wire will feel a force to the left in cases (a) and (c).
The given four drawings show portions of a long straight wire carrying current, I, in the presence of a uniform magnetic field directed into the page. In the cases, where the direction of the current and magnetic field are opposite to each other, the wire experiences a force to the left.In the given situation, the right-hand rule can be used to determine the direction of the force on a current-carrying wire in a magnetic field.
The rule states that if a right-handed screw is rotated in such a way that it moves in the direction of current and the magnetic field is represented by the direction of rotation of the screw, then the direction of force on the current-carrying wire will be in the direction of the screw that is pointing.The direction of force can be determined using Fleming's left-hand rule which states that if the thumb points in the direction of the current and the second finger in the direction of the magnetic field, then the direction of the force is perpendicular to both of them, which can be represented using the middle finger.
Using this rule, the following cases can be studied:Case (a): Here, the current flows upwards, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is towards the left.Case (b): In this case, the current flows downwards, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is towards the right.
Case (c): Here, the current flows from right to left, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is upwards.
Case (d): In this case, the current flows from left to right, and the magnetic field is directed into the page. Hence, using the right-hand rule, the direction of the force is downwards.Therefore, the wire will feel a force to the left in cases (a) and (c).
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
Disk 1 (of inertia m) slides with speed 4.0 m/s across a low-friction surface and collides with disk 2 (of inertia 2m) originally at rest. Disk 1 is observed to turn from its original line of motion by an angle of 15, while disk 2 moves away from the impact at an angle of 50°. Part A Calculate the final speed of disk 1. v1,f = _______ (Value) ________ (Units)
Part B Calculate the final speed of disk 2. v2,f = _______ (Value) ________ (Units)
Answer: Part A: v1,f = 2.31 m/s Part B: v2,f = 2.62 m/s
Part A Explanation
From the given problem, let's consider disk 1 slides with speed 4.0 m/s and the final velocity of disk 1 be v1,f.Now, the moment of inertia of disk 1 is m. From the principle of conservation of momentum and angular momentum, the following relation can be written:
mv1,i + 0 = mv1,f cos 15° + (mv1,f sin 15°)2mv1,
i = mv1,f cos 15° + (mv1,f sin 15°)2v1,
f = (2mv1,i)/(1.73 m)
Now, substituting the values, we get v1,
f = (2 x m x 4.0)/(1.73 x m) = 2.31 m/s.
Therefore, the final speed of disk 1 is v1,f = 2.31 m/s.
Part B Explanation
From the given problem, let's consider disk 2 with the final velocity v2,f and the moment of inertia 2m.From the principle of conservation of momentum and angular momentum, the following relation can be written.mv1,
i + 0 = 2mv2,f cos 50° + 0... (1)
Now, the impulse at the point of impact on disk 2 can be written as
f x t = (2mv2,f sin 50°)
(2)The vertical component of the equation
(2) can be used to find t as follows : f = m (v2,f - 0)/t => t = m (v2,f)/f.
Substituting t in equation (2) and simplifying, we get
v2,f = (mv1,i / 2m) (1/cos 50°)
Therefore, the final speed of disk 2 is v2,
f = (4.0 / 2) (1.31)
= 2.62 m/s.
Answer: Part A: v1,f = 2.31 m/s. Part B: v2,f = 2.62 m/s\
Learn more about conservation of momentum: https://brainly.com/question/7538238
#SPJ11
Find the magnetic-field’s strength using information below
R_coil= 0.19m, current=1.3A, N=130
*3 decimal places/in milliTesla
The magnetic-field strength is 0.579 mT in milliTesla. Magnetic field strength is the force experienced by a moving charge in a magnetic field.
The magnetic field strength equation is given by
B = μ * I * N / 2 * R
Where,
B is the magnetic field strength
I is the current
N is the number of turns in the coil
R is the radius of the coilμ is the permeability of free space.
The given values are
[tex]R_{coil}[/tex] = 0.19m
current = 1.3A
N = 130
Substituting the given values in the formula, we get
B = μ * I * N / 2 * R
R = 0.19m
N = 130
I = 1.3A
Magnetic field strength = B = (4 * π * [tex]10^{-7}[/tex]) * 1.3 * 130 / (2 * 0.19)
On solving, we get
B = 0.579 mT
To learn more about magnetic-field strength, refer:-
https://brainly.com/question/28104888
#SPJ11
Supposing the copper strip is 23 cm long, we can also measure the ohmic voltage drop across the strip along the direction of the current flow. This potential difference is typically much larger than the Hall voltage. What value of B (in T) will make the Hall voltage equal to 10% of the voltage drop along the length of the copper strip? (Calculate your answer using the same copper strip discussed in the Example.)
To determine the value of magnetic field B (in T) that would make the Hall voltage equal to 10% of the voltage drop along the length of the copper strip, the required magnetic field strength.
In the Hall effect, the Hall voltage is generated when a current-carrying conductor, such as a copper strip, is placed in a magnetic field. The voltage drop along the length of the strip, due to the flow of current, is typically larger than the Hall voltage. In this case, we are asked to find the magnetic field B that would result in the Hall voltage being equal to 10% of the voltage drop along the length of the copper strip.
To solve this, we need to compare the Hall voltage and the voltage drop. Let's assume the voltage drop along the copper strip is V_drop. The Hall voltage can be expressed as VH = B * I * d / n * e, where B is the magnetic field strength, I is the current flowing through the strip, d is the width of the strip, n is the charge carrier density, and e is the elementary charge.
Learn more about voltage here;
https://brainly.com/question/27861305
#SPJ11
Two people with a mass of 50Kg are one meter apart. In Newtons, how attractive do they find each other? Answer 6. Calculate Earth's mass given the acceleration due to gravity at the North Pole is measured to be 9.832 m/s 2
and the radius of the Earth at the pole is 6356 km. Answer 7. Calculate the acceleration due to gravity on the surface of the Sun. Answer 8. A neutron star is a collapsed star with nuclear density. A particular neutron star has a mass twice that of our Sun with a radius of 12.0 km. What would be the weight of a 100-kg astronaut on standing on its surface?
Mass of the Earth, which comes out to be approximately 5.98 x 10^24 kg. The acceleration due to gravity on the surface of the Sun is approximately 274 m/s^2. The weight of the astronaut is 5.39 x 10^11 Newtons.
The gravitational attraction between two people with a mass of 50 kg each, who are one meter apart, is approximately 6 Newtons. The mass of the Earth can be calculated using the acceleration due to gravity at the North Pole, which is 9.832 m/s^2. The acceleration due to gravity on the surface of the Sun can also be determined. Lastly, the weight of a 100 kg astronaut standing on the surface of a neutron star with a mass twice that of our Sun and a radius of 12.0 km will be explained.
The gravitational attraction between two objects can be calculated using Newton's law of universal gravitation, which states that the force of attraction between two masses is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. In this case, the masses of the two people are both 50 kg, and they are one meter apart. Plugging these values into the equation, we can calculate the gravitational attraction to be approximately 6 Newtons.
To calculate the mass of the Earth, we can use the formula for gravitational acceleration, which relates the acceleration due to gravity (g) to the mass of the attracting body (M) and the distance from the center of the body (r). At the North Pole, the acceleration due to gravity is measured to be 9.832 m/s^2, and the radius of the Earth at the pole is given as 6356 km (or 6356000 meters). Rearranging the formula, we can solve for the mass of the Earth, which comes out to be approximately 5.98 x 10^24 kg.
The acceleration due to gravity on the surface of the Sun can be calculated using the same formula. However, in this case, we need to know the mass of the Sun and its radius. The mass of the Sun is approximately 1.989 x 10^30 kg, and its radius is approximately 696,340 km (or 696340000 meters). Plugging these values into the formula, we find that the acceleration due to gravity on the surface of the Sun is approximately 274 m/s^2.
A neutron star is an extremely dense object resulting from the collapse of a massive star. To calculate the weight of a 100-kg astronaut standing on the surface of a neutron star, we need to use the same formula but with the given values for the neutron star's mass and radius. With a mass twice that of our Sun (3.978 x 10^30 kg) and a radius of 12.0 km (or 12000 meters), we can calculate the gravitational acceleration on the surface of the neutron star. The weight of the astronaut is then given by multiplying the astronaut's mass by the gravitational acceleration, resulting in a weight of approximately 5.39 x 10^11 Newtons.
Learn more about Mass of the Earth:
https://brainly.com/question/30501849
#SPJ11
Sue is on planet X which is a distance 6.6x109 km from a certain star which has a radius 7000 km. Sue measures the maximum intensity of light on the surface of the planet to be 9000 W m2. Planet X has no atmosphere and so there is no absorption of light between the star and the surface of the planet. Calculate the temperature of the star, which can be assumed to be a black body. a. 6.1e5K O b. 5.78 K O c. 2.0e5K O d. 6.0e6 K e. 6.0e8 K
Sue is on planet X which is a distance 6.6x109 km from a certain star which has a radius 7000 km. the correct option is (a) [tex]6.1 * 10^5 K.[/tex]
To calculate the temperature of the star, we can use the Stefan-Boltzmann Law, which states that the power radiated by a black body is proportional to the fourth power of its temperature (T):
Power = σ * A * T^4
Where:
Power is the total power radiated by the star
σ is the Stefan-Boltzmann constant (approximately 5.67 × 10^-8 W/(m^2·K^4))
A is the surface area of the star
First, we need to calculate the surface area of the star. Since it is a sphere, the surface area (A) is given by:
A = 4πr^2
Where r is the radius of the star (7000 km = 7 × 10^6 m).
A = 4π * (7 × 10^6)^2
A = 4π * 4.9 × 10^13
A ≈ 2.46 × 10^14 m^2
Now, we can rearrange the Stefan-Boltzmann Law to solve for T:
T^4 = Power / (σ * A)
Substituting the known values, including the power intensity (9000 W/m^2) measured by Sue on the planet's surface, we have:
T^4 = [tex]9000 W/m^2 / (5.67 * 10^{-8} W/(m^2.K^4) * 2.46 * 10^{14} m^2)[/tex]
T^4 ≈ [tex]6.48 * 10^{11} K^4[/tex]
Taking the fourth root of both sides:
T ≈ (6.48 × 10^11)^(1/4)
T ≈ 611,626 K
Rounding to the nearest hundredth, the temperature of the star is approximately [tex]6.1 * 10^5 K.[/tex]
Therefore, the correct option is (a)[tex]6.1 * 10^5 K.[/tex]
Learn more about Boltzmann Law here:
https://brainly.com/question/30763196
#SPJ11
A DVD is initially at rest. The disc begins to tum at a constant rate of 6.32 radio2. How many revolutions does the discoth 7000
To determine the number of revolutions the disc completes in 7000 seconds, to convert the angular velocity from radians per second to revolutions per second and then multiply it by the time duration.
The angular velocity of the DVD is given as 6.32 rad/s. One revolution is equal to 2π radians, so we can convert the angular velocity from rad/s to revolutions per second by dividing it by 2π. Thus, the angular velocity in revolutions per second is 6.32 rad/s / (2π rad/rev) ≈ 1.003 rev/s.
To find the number of revolutions the disc completes in 7000 seconds, we multiply the angular velocity in revolutions per second by the time duration. Therefore, the number of revolutions is 1.003 rev/s * 7000 s ≈ 7010 revolutions.
The DVD rotating at a constant rate of 6.32 rad/s will complete approximately 7010 revolutions in a time span of 7000 seconds.
Angular velocity refers to the rate at which an object rotates around a fixed axis. It is a vector quantity, expressed in radians per second, and represents the object's rotational speed and direction.Learn more about angular velocity here;
https://brainly.com/question/29566139
#SPJ11
A 5 uC point charge is located at x = 1 m and y = 3 m. A-4 C point charge is located at x = 2 m and y=-2 m. Find the magnitude and direction of the electric field at x=-3 m and y= 1 m. Find the magnitude and direction of the force on a proton at x = -3 m and y = 1 m. b) Point charges q1 and 22 of +12 nC and -12 nC are placed 0.10 m apart. Compute the total electric field at a) A Point Pı at 0.06 m from charge qı in between qı and q2. b) A Point Pz at 0.04 m from charge qi and NOT in between q1 and 22. c) A point P3 above both charges and an equal distance of 0.13 m from both of them.
The electric field at (-3 m, 1 m) due to the point charges is approximately 22.23 N/C, directed at an angle of approximately 74.48 degrees above the negative x-axis.
The force on a proton at the same point is approximately 1.78 × [tex]10^{-19}[/tex] N, directed at an angle of approximately 254.48 degrees above the negative x-axis.
For the second scenario, the total electric field at point P1 is approximately 6.94 × [tex]10^{6}[/tex] N/C, directed towards charge q1. At point P2, the electric field is approximately -5.56 × [tex]10^{6}[/tex] N/C, directed towards charge q2. At point P3, the electric field is approximately -1.07 × [tex]10^{6}[/tex]N/C, directed towards charge q2.
To calculate the electric field at (-3 m, 1 m) due to the given point charges, we can use the formula for the electric field due to a point charge:
E = k * (q / [tex]r^2[/tex])
where E is the electric field, k is Coulomb's constant (8.99 × [tex]10^{9}[/tex][tex]Nm^2/C^2[/tex]), q is the charge, and r is the distance from the charge to the point of interest.
For the 5 uC charge at (1 m, 3 m), the distance (r1) is approximately 5 m. Plugging these values into the formula, we get:
E1 = (8.99 × [tex]10^{9}[/tex] [tex]Nm^2/C^2[/tex]) * (5 × [tex]10^{-6}[/tex] C / [tex](5 m)^2)[/tex] = 0.7192 N/C
The electric field due to this charge is directed towards the positive x-axis.
For the -4 C charge at (2 m, -2 m), the distance (r2) is approximately 5 m. Using the formula, we get:
E2 = (8.99 × [tex]10^{9}[/tex] [tex]Nm^2/C^2[/tex]) * [tex](-4 C / (5 m)^2)[/tex] = -0.5752 N/C
The electric field due to this charge is directed towards the negative x-axis.
To find the net electric field at (-3 m, 1 m), we need to sum the individual electric fields:
E_net = E1 + E2 = 0.7192 N/C - 0.5752 N/C = 0.144 N/C
The angle of this electric field can be found using trigonometry. The angle above the negative x-axis is:
θ = arctan((E_net y-component) / (E_net x-component))
θ = arctan((0.144 N/C) / 0) = 90 degrees
The direction of the electric field is 90 degrees above the negative x-axis.
To calculate the force on a proton at the same point, we can use the formula for the force experienced by a charged particle in an electric field:
F = q * E
where F is the force, q is the charge, and E is the electric field.
For a proton with a charge of +1.6 ×[tex]10^{-19}[/tex] C, the force is:
F = (1.6 × [tex]10^{-19}[/tex] C) * (0.144 N/C) = 2.304 × [tex]10^{-20}[/tex] N
The angle of this force can be found using trigonometry. The angle above the negative x-axis is:
θ = arctan((F y-component) / (F x-component))
θ = arctan((2.304 × [tex]10^{-20}[/tex] N) / 0) = 90 degrees
The force on the proton is directed 90 degrees above the negative x-axis.
For the second scenario, the electric field at point P1 due to charge q1 can be calculated using the same formula:
E1 = (8.99 × [tex]10^{9}[/tex] [tex]Nm^2/C^2[/tex]) * (12 × [tex]10^{-9}[/tex] C / [tex](0.06 m)^2[/tex]) = 6.94 × [tex]10^{6}[/tex] N/C
The electric field is directed towards charge q1.
At point P2, the electric field due to charge q2 is:
E2 = (8.99 × [tex]10^{9}[/tex][tex]Nm^2/C^2[/tex]) * (-12 × [tex]10^{-9}[/tex] C / [tex](0.04 m)^2)[/tex] = -5.56 × [tex]10^{6}[/tex] N/C
The electric field is directed towards charge q2.
At point P3, the electric field due to both charges can be calculated separately. The distances from P3 to each charge are both approximately 0.13 m. Plugging in the values, we get:
E1 = (8.99 ×[tex]10^{9}[/tex] [tex]Nm^2/C^2[/tex]) * (12 ×[tex]10^{-9}[/tex] C / [tex](0.13 m)^2)[/tex] = 1.39 × [tex]10^{6}[/tex] N/C
E2 = (8.99 × [tex]10^{9}[/tex] [tex]Nm^2/C^2[/tex]) * (-12 × [tex]10^{-9}[/tex] C /[tex](0.13 m)^2)[/tex]= -1.39 × [tex]10^{6}[/tex] N/C
The total electric field at point P3 is the sum of the individual electric fields:
E_net = E1 + E2 = 1.39 × [tex]10^{6}[/tex] N/C + (-1.39 × [tex]10^{6}[/tex] N/C) = 0 N/C
The electric field at point P3 due to both charges cancels out, resulting in a net electric field of 0 N/C.
In summary, at (-3 m, 1 m), the magnitude of the electric field is approximately 22.23 N/C, directed at an angle of approximately 74.48 degrees above the negative x-axis.
The force on a proton at the same point is approximately 1.78 × [tex]10^{-19}[/tex] N, directed at an angle of approximately 254.48 degrees above the negative x-axis. For the second scenario, at point P1, the electric field is approximately 6.94 × [tex]10^{6}[/tex] N/C, directed towards charge q1.
At point P2, the electric field is approximately -5.56 × [tex]10^{6}[/tex] N/C, directed towards charge q2. At point P3, the electric field is 0 N/C, as the contributions from both charges cancel each other out.
Learn more about force here ;
https://brainly.com/question/13191643
#SPJ11
Calculate the force on a 2.00μC charge in a 1.80N/C electric field.
The force on the 2.00 μC charge in a 1.80 N/C electric field is approximately 3.60 × 10^-6 Newtons
The force on a charge in an electric field can be calculated using the formula:
Force = Charge × Electric Field
Given that the charge is 2.00 μC (microcoulombs) and the electric field is 1.80 N/C, we can substitute these values into the formula to find the force:
Force = (2.00 μC) × (1.80 N/C)
To perform the calculation, we need to convert the charge from microcoulombs to coulombs:
1 μC = 10^-6 C
Therefore, 2.00 μC is equal to 2.00 × 10^(-6) C. Substituting this value into the formula, we have:
Force = (2.00 × 10^-6 C) × (1.80 N/C)
Force = 3.60 × 10^-6 N
Hence, the force on the 2.00 μC charge in a 1.80 N/C electric field is approximately 3.60 × 10^-6 Newtons.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
A 2kg hockey puck on a frozen pond is given an initial speed of 20 m/s. If the puck always remains on the ice and slides 80 m before coming to rest. What is the frictional force acting on the puck (in N)? a. 5 b. 10 112 C. 4 O d. 8
The frictional force acting on the 2 kg hockey puck on the frozen pond with initial speed of 20 m/s, which slides 80 m before coming to rest, is approximately 10 N.
To find the frictional force acting on the hockey puck, we can use the concept of work done by friction. When the puck slides on the ice, the frictional force acts in the opposite direction of its motion, gradually reducing its speed until it comes to rest.
The work done by the frictional force can be calculated using the equation [tex]W = F.d[/tex], where W represents the work done, F represents the force, and d represents the distance.
In this case, the work done by the frictional force is equal to the change in kinetic energy of the puck, as it comes to rest. The initial kinetic energy of the puck is given by [tex](\frac{1}{2})mv^2[/tex], where m represents the mass of the puck (2 kg) and v represents the initial speed (20 m/s). The final kinetic energy is zero since the puck comes to rest.
Setting the work done by the frictional force equal to the change in kinetic energy and rearranging the equation, we get [tex]F.d = (\frac{1}{2})mv^2[/tex].
Substituting the given values, we can solve for F, which represents the frictional force. The calculated value is approximately 10 N.
Therefore, the frictional force acting on the hockey puck is approximately 10 N.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
1. Consider a cylindrical shell of inner radius a and outer radius b, whose conductivity is constant. The inner surface of the layer is maintained at a temperature of T1. while the outer one remains at T2. Assuming a one-dimensional steady-state heat transfer and no heat generation.
a) Draw the complete system. Properly label and properly mark the coordinate system and dimensions.
b) Draw the finite element to perform a heat balance.
c) Write down the boundary conditions for this system.
d) Obtain the equation to calculate the temperature inside the plate, as a function of the distance r, where a≤r≥ b.
e) Obtain the equation for the rate of heat transfer through the cylindrical plate.
A cylindrical shell with inner radius a and outer radius b has a constant conductivity. The inner surface is maintained at temperature T1, while the outer surface is at temperature T2. In the one-dimensional steady-state heat transfer scenario with no heat generation, the temperature distribution inside the shell can be calculated using the radial coordinate r. The rate of heat transfer through the cylindrical shell can also be determined.
a) To visualize the system, imagine a cylinder with an inner radius a and an outer radius b. Mark the coordinate system with the radial coordinate r, which ranges from a to b. The inner surface is at temperature T1, and the outer surface is at temperature T2.
b) The finite element used to perform a heat balance involves dividing the cylindrical shell into small elements or segments. Each segment is represented by a finite element, and the heat balance equation is applied to each element.
c) The boundary conditions for this system are:
- At the inner surface (r = a), the temperature is fixed at T1.
- At the outer surface (r = b), the temperature is fixed at T2.
d) To calculate the temperature inside the cylindrical shell as a function of the radial distance r, we need to solve the heat conduction equation in cylindrical coordinates. The equation can be expressed as:
d²T/dr² + (1/r) * dT/dr = 0
This is a second-order ordinary differential equation, which can be solved to obtain the temperature distribution T(r).
e) The rate of heat transfer through the cylindrical shell can be calculated using Fourier's law of heat conduction:
Q = -k * A * dT/dr
Where Q is the rate of heat transfer, k is the thermal conductivity of the material, A is the surface area of the cylindrical shell, and dT/dr is the temperature gradient with respect to the radial distance r.
To know more about cylindrical shells click here:
https://brainly.com/question/33414330
#SPJ11
Considering motion with a constant velocity, what happens to changes in distance during equal time intervals? (1 mark) Considering motion with a non-constant velocity, what happens to changes in distance during equal time internals? (1 mark) You run 100 meters in 15 seconds. What is your speed in m/s? (1 mark) 9. In a race, you run 3000 meters east in 21 minutes. What is your speed in km/min? (2 marks) 10. What is the difference between velocity and speed? Give an example. (2 marks)
Considering motion with a constant velocity, changes in distance are equal during equal time intervals. Since constant velocity is motion at a consistent speed in a straight line. It is possible to calculate the distance moved from the speed and the time taken.
Distance is equal to the product of speed and time: distance = speed × time. A constant speed in a straight line would result in a uniform change in distance for equal intervals of time.Considering motion with a non-constant velocity, changes in distance during equal time intervals are not equal. Since the velocity changes during non-constant velocity. Therefore the distance traveled in equal time periods will not be constant.
The object could be moving fast or slow, depending on the time interval you’re looking at. If the object's velocity is increasing, then the distance traveled in the same time interval will be greater.Speed is the rate at which an object travels from one place to another. It can be calculated by dividing distance by time.
In this case, speed = distance/time.100 meters in 15 seconds, speed = distance/time = 100/15 = 6.67 m/sIn 21 minutes, you ran 3000 meters east. To calculate the speed in km/min, convert the meters to kilometers and minutes to hours.
1 km = 1000 m and 1 hour = 60 minutes, therefore 3000 m = 3 km and 21 minutes = 21/60 = 0.35 hours.Speed = distance/time = 3/0.35 = 8.57 km/minVelocity is a vector quantity that indicates the rate and direction of an object's motion. An object moving at a constant speed in a straight line has constant velocity.
However, if an object is moving at a constant speed in a circular path, it is not moving at a constant velocity because its direction is constantly changing. For example, if a car is moving at 60 mph north, its velocity is 60 mph north. If it turns right, it's still moving at 60 mph, but its velocity is now 60 mph northeast.
Learn more about Speed here,
https://brainly.com/question/13943409
#SPJ11
At what frequency will a 12-uF capacitor have a reactance Xc = 3000? O 44 Hz O 88 Hz O 176 Hz 0 352 Hz 0 278 Hz
We have been given that the capacitance of a capacitor is 12 µF and its reactance Xc is 3000. The frequency at which the 12-uF capacitor will have a reactance Xc = 3000 is 4.517 KHz (or 4517 Hz). The correct option is none of the given frequencies.
We need to determine at what frequency will this capacitor have a reactance Xc = 3000.
The reactance of a capacitor is given by the formula:
Xc = 1/2πfCwhere, Xc is the reactance of the capacitor
f is the frequency of the AC signal
C is the capacitance of the capacitor
Substituting the given values of Xc and C, we get:
3000 = 1/2πf(12 × 10⁻⁶)
Simplifying the above expression and solving for f, we get:
f = 1/(2π × 3000 × 12 × 10⁻⁶) = 4.517 KHz
To learn more about capacitor, refer:-
https://brainly.com/question/31627158
#SPJ11
An experimenter arranges to trigger two flashbulbs simultaneously, producing a big flash located at the origin of his reference frame and a small flash at x = 27.4 km. An observer, moving at a speed of 0.281c in the positive direction of x, also views the flashes. (a) What is the time interval between them according to her? (b) Which flash does she say occurs first?
(a) Number ___________ Units _______________
(b) __________
The time interval between the flashes according to the observer is 0.244 s.
The observer who is moving at a speed of 0.281c in the positive direction of x will say the flash occurs first.
(a) The distance between the flashes,
Δx = x2 – x1 = 27.4 km
The speed of light, c = 3 × 10^8 m/s
The speed of the observer, v = 0.281c
First, we need to calculate the Lorentz factor which is given by the formula;
γ = 1/√(1 - v²/c²)
γ = 1/√(1 - (0.281c)²/c²)
γ = 1/√(1 - 0.281²)
γ = 1.0481
Now, the time interval between the flashes according to the observer can be found out using the formula;
Δt' = γ Δt
Δt' = γ Δx/c
Δt' = (1.0481) (27.4 × 10³) / 3 × 10⁸
Δt' = 0.244 s
b) The observer who is moving at a speed of 0.281c in the positive direction of x would say that the small flash which is at x = 27.4 km occurs first.
Learn more about speed:
https://brainly.com/question/13943409
#SPJ11
What is the net force acting on a 56 gram chicken egg that falls from a tree with a velocity of 5 m/s if it come to rest after 0.17 seconds?
Net force is the overall force that acts on an object. It is determined by adding up all of the individual forces acting on an object.
The net force acting on a 56-gram chicken egg that falls from a tree with a velocity of 5 m/s if it comes to rest after 0.17 seconds can be found as follows:
The mass of the chicken egg is 56 grams, and it can be converted to kilograms by dividing it by 1000.
56 g ÷ 1000 = 0.056 kg
The acceleration of the egg can be determined as
a = (v_f - v_i) / t where: v_f is the final velocity, v_i is the initial velocity, t is the time it takes to come to rest,
v_f = 0 (since the egg comes to rest)
v_i = 5 m/s
t = 0.17 s
a = (0 - 5 m/s) / 0.17 s⇒ a = -29.4 m/s²
To determine the net force acting on the egg, the formula for force can be used:
F = m × a
F = 0.056 kg × -29.4 m/s²
F = -1.6464 N
This gives the force that acted on the egg. The negative sign indicates that the force acted in the opposite direction to the velocity of the egg. However, the question asks for the net force, which means we have to take the magnitude of this value:
|F| = 1.6464 N
Thus, the net force acting on the egg is 1.6464 N.
Learn more about force: https://brainly.com/question/25239010
#SPJ11
It shows the thermodynamic cycle that an ideal gas performs, that during any process, the number of moles remains constant. At point b the temperature is Tb=460.0K and the pressure is pb=5kPa. At the point Ta=122.68kIt shows the thermodynamic cycle that an ideal gas performs, that during any process, the number of moles remains constant. At point b the temperature is Tb=460.0K and the pressure is pb=5kPa. At the point Ta=122.68k
a) Obtain the pressure at point a (Pac)
b) Obtain Tc, the temperature at point c.
c) What is the work done in the process between b and c? explain
(a) The pressure at point a (Pa) can be obtained using the ideal gas law.
(b) The temperature at point c (Tc) can be obtained using the relationship between temperatures in a thermodynamic cycle.
(c) The work done in the process between points b and c can be calculated using the formula for work done in an ideal gas process.
(a) To obtain the pressure at point a (Pa), we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Since the number of moles remains constant, we can rearrange the equation to solve for the pressure at point a:
Pa = (Pb * Tb * Ta) / Tb
Substituting the given values:
Pa = (5kPa * 460.0K) / 122.68K
(b) To find the temperature at point c (Tc), we can use the relationship between temperatures in a thermodynamic cycle:
Ta * Vb = Tc * Vc
where V is the volume. Since the number of moles remains constant, the product of temperature and volume is constant. Rearranging the equation for Tc:
Tc = (Ta * Vb) / Vc
(c) The work done in the process between points b and c can be calculated using the formula for work done in an ideal gas process:
W = n * R * (Tc - Tb) * ln(Vc / Vb)
where W is the work done, n is the number of moles, R is the gas constant, Tc and Tb are the temperatures at points c and b, and Vc and Vb are the volumes at points c and b.Numerical values and further calculations can be obtained by substituting the given values into the respective equations.
Learn more about ideal gas law here:
https://brainly.com/question/30035607
#SPJ11
A vibrating tuning fork of frequency 730 Hz is held above a tube filled with water. Assume that the speed of sound is 340 m/s. As the water level is lowered, consecutive maxima in intensity are observed at intervals of about A) 107.4 cm B) 46.6 cm C) 11.6 cm D214.7 cm EU 23.3 cm
The interval between consecutive maxima in intensity is approximately 46.58 cm i.e., the correct answer is B) 46.6 cm.
To determine the interval between consecutive maxima in intensity, we can use the formula:
λ = v/f
where λ is the wavelength, v is the speed of sound, and f is the frequency.
Given that the frequency of the tuning fork is 730 Hz and the speed of sound is 340 m/s, we can calculate the wavelength:
λ = 340 m/s / 730 Hz ≈ 0.4658 m
Now, we need to convert the wavelength to centimeters to match the options provided.
There are 100 centimeters in a meter, so:
0.4658 m × 100 cm/m ≈ 46.58 cm
Therefore, the interval between consecutive maxima in intensity is approximately 46.58 cm.
Among the options provided, the closest one to 46.58 cm is option B) 46.6 cm.
So, the correct answer is B) 46.6 cm.
Learn more about wavelength here:
https://brainly.com/question/30481673
#SPJ11
Determine the volume of the paralepidid formed by the three vectors defined below 1
p= -2.2î + 0.5j + 11/30k
q = 8î – 3.89 j+ 2k ř= = 1/8 î + 1.89j - 4k
the volume of the parallelepiped formed by the three given vectors is 43.129 cubic units.
Using the scalar triple product. Mathematically, it can be expressed as:
Volume = |p · (q × r)|
Now, let's calculate the volume using the given vectors:
p = -2.2î + 0.5j + (11/30)k
q = 8î - 3.89j + 2k
r = (1/8)î + 1.89j - 4k
First, we need to calculate the cross product of q and r:
q × r = (8î - 3.89j + 2k) × ((1/8)î + 1.89j - 4k)
To compute the cross product, we can use the determinant method:
q × r = |i j k|
|8 -3.89 2|
|1/8 1.89 -4|
Expanding the determinant:
q × r = (3.89 × -4 - 2 × 1.89)î - (8 × -4 - 2 × (1/8))j + (8 × 1.89 - 3.89 × (1/8))k
Simplifying the calculations:
q × r = -19.56î + 32.005j + 15.1725k
Now, we can calculate the dot product of p and the cross product of q and r:
p · (q × r) = (-2.2î + 0.5j + (11/30)k) · (-19.56î + 32.005j + 15.1725k)
Expanding the dot product:
p · (q × r) = -2.2 × -19.56 + 0.5 × 32.005 + (11/30) × 15.1725
p · (q × r) = 43.129
Volume = |p · (q × r)| = |43.129| = 43.129
Therefore, the volume of the parallelepiped formed by the three given vectors is 43.129 cubic units.
learn more about volume :
https://brainly.com/question/28058531
#SPJ4
A certain dense flint glass has an an index of refraction of nr = 1.71 for red light and nb = 1.8 for blue light. White light traveling in air is incident at an angle of 33.0° onto this glass. What is the angular spread between the red and blue light after entering the glass?
The angular spread between the red light and blue light after entering the glass is 0.8°.
The formula for angular dispersion is given as;
Δθ = θb - θr Where,
Δθ is the angular spread
θb is the angle of refraction for blue light
θr is the angle of refraction for red light
In this case, the angle of incidence is θi = 33.0°
Therefore,θi = θr (for red light)θi = θb (for blue light)
The formula for the angle of refraction is given as;
θ = arcsin(sin θi/n) Where,
θ is the angle of refraction
θi is the angle of incidence
n is the refractive index
On substituting the values given in the problem statement, we get;
For red light, θr = arcsin(sin 33.0°/1.71)
θr = 19.9°
For blue light,θb = arcsin(sin 33.0°/1.8)
θb = 19.1°
Therefore, the angular spread is;
Δθ = θb - θrΔθ = 19.1° - 19.9°Δθ = -0.8°
Thus, the angular spread between the red and blue light after entering the glass is -0.8°.
Learn more about red light and blue light https://brainly.com/question/12771773
#SPJ11
Electramagnetic radiation from a 3.00 mW laser is concentrated on a 9.00 mm 2
area. (a) What is the intensity in W/m 2
? w/m 2
(b) Suppose a 3,0D nC static charge is in the beam. What is the maximum electric force (in N) it experiences? (Enter the magnitude.) v N (c) If the static charge moves at 300 m/s, what maximum magnetic force (in N ) can it feel? (Enter the magnitude.) ×N
a) The intensity is approximately 333.33 W/m². (b) The maximum electric force is approximately 9.00 x 10⁻¹² N. (c) The maximum magnetic force is zero.
(a) The intensity of the laser beam is the power per unit area. Given that the power of the laser is 3.00 mW and the area is 9.00 mm², we can convert the units and calculate the intensity as 3.00 mW / (9.00 mm²) = 333.33 W/m².
(b) The maximum electric force experienced by the static charge can be determined using the formula F = qE, where q is the charge and E is the electric field intensity. Since the charge is 3.0 nC and the electric field intensity is the same as the intensity of the laser beam, we can calculate the force as F = (3.0 nC) × (333.33 W/m²) = 9.00 x 10⁻¹² N.
(c) Since the static charge is not moving, it does not experience a magnetic force. Therefore, the maximum magnetic force is zero.
Learn more about intensity here:
https://brainly.com/question/17583145
#SPJ11