One type of quantitative research is the experimental study. What is a key to experimental research?
1. being able to duplicate the research
2. getting the research to pass the Internal Review Board
3. the survey
4. all answers are correct

Answer:

-55.2 J

Explanation:

W=∆KE

[tex]W=\frac{1}{2}m(v_i^2-v_f^2)[/tex]

[tex]W=\frac{1}{2}(0.23)((29)^2-(19)^2) \\W = -55.2 J[/tex]

The work done by air resistance on the ball during its flight is -1150 J.

To find the work done by air resistance, we can use the work-energy theorem. The work-energy theorem states that the work done on an object is equal to its change in kinetic energy.

Step 1: Calculate the initial kinetic energy (KE_initial) using the formula KE = 0.5 * mass * (initial speed)^2.
KE_initial = 0.5 * 0.23 kg * (29 m/s)^2 = 96.49 J

Step 2: Calculate the final kinetic energy (KE_final) using the formula KE = 0.5 * mass * (final speed)^2.
KE_final = 0.5 * 0.23 kg * (19 m/s)^2 = 41.135 J

Step 3: Calculate the change in kinetic energy (ΔKE) by subtracting KE_initial from KE_final.
ΔKE = KE_final - KE_initial = 41.135 J - 96.49 J = -55.355 J

Step 4: Since the work done by air resistance is equal to the change in kinetic energy, the work done by air resistance is -55.355 J during the upward flight.

The work done during the downward flight is the same in magnitude but opposite in direction, so the total work done is -55.355 J * 2 = -110.71 J, which we can round up to -1150 J.

To know more about work-energy theorem click on below link:

https://brainly.com/question/30560150#

#SPJ11

Answer:

when the ball is halfway down the ramp, it will be going at a speed of 7 m/s.

Explanation:

To determine the speed of a 2 kg ball when it is halfway down a 5 m tall ramp, we can use the principles of conservation of energy and kinematics.

At the top of the ramp, the ball has gravitational potential energy given by:

PE = mgh

where m is the mass of the ball (2 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the ramp (5 m). Plugging in these values, we get:

PE = (2 kg)(9.8 m/s^2)(5 m) = 98 J

As the ball rolls down the ramp, some of this potential energy is converted into kinetic energy, which is given by:

KE = (1/2)mv^2

where v is the velocity of the ball. At any point along the ramp, the total energy (potential plus kinetic) of the ball remains constant. Therefore, we can set the initial potential energy equal to the sum of kinetic and potential energies at any point along the ramp.

When the ball is halfway down the ramp, it has descended a height of 2.5 m. Its potential energy at this point is:

PE = (2 kg)(9.8 m/s^2)(2.5 m) = 49 J

Therefore, its kinetic energy at this point must also be 49 J. Plugging this into our equation for kinetic energy, we get:

49 J = (1/2)(2 kg)v^2

Solving for v, we get:

v = sqrt(98/2) = sqrt(49) = 7 m/s

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. The distance between the objective lens and the eyepiece to produce a final virtual image 100 cm to the left of the eyepiece  must be approximately 4.14 cm.

To find the distance between the objective lens and the eyepiece, we can use the lens formula:

1/f = 1/v - 1/u

where f is the focal length, v is the distance from the lens to the image, and u is the distance from the lens to the object.

For the objective lens:
u = -20 m (distance from the object to the lens)
f = 3.0 cm (focal length)
1/f = 1/v - 1/u
1/(3.0) = 1/v - 1/(-20)
1/(3.0) + 1/(20) = 1/v

Solving  for v:

v = 3.5294 cm (distance from the objective lens to the image)

For the eyepiece:
u = 100 cm (distance from the image to the eyepiece)
f = 0.60 cm (focal length)
1/f = 1/v - 1/u
1/(0.60) = 1/v - 1/(100)

Solving  for v:
v = 0.6129 cm (distance from the eyepiece to the final virtual image)

Finally, to find the distance between the objective lens and the eyepiece, add the two v values:

3.5294 cm (distance from the objective lens to the image) + 0.6129 cm (distance from the eyepiece to the final virtual image) = 4.1423 cm

Therefore, the distance between the objective lens and the eyepiece must be approximately 4.14 cm to produce a final virtual image 100 cm to the left of the eyepiece.

For more such questions on objective lens, click on:

https://brainly.com/question/17054095

#SPJ11

The probable question may be:

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. (a) What must be the distance between the objective lens and eyepiece to produce a final virtual image 100 cm to the left of the eyepiece?

The velocity of the upper end of the pole just before it hits the ground is 5.27 m/s.

When a 1.80-meter-long pole is balanced vertically with its tip on the ground, and it begins to fall, the velocity of the upper end of the pole just before it hits the ground can be determined using the conservation of energy.

The kinetic energy of the pole just before it hits the ground is equal to the potential energy of the pole just before it begins to fall. When the pole is at rest, its potential energy is maximum, which is given by mgh, where m is the mass of the pole, g is the acceleration due to gravity, and h is the height of the center of mass of the pole.

The center of mass of the pole is situated at a height of 0.9 meters above the ground.Conservation of energy is defined as the potential energy of the pole just before it starts to fall being equal to the kinetic energy of the pole just before it hits the ground.

Thus, the kinetic energy of the pole just before it hits the ground is given by K = 1/2 mv², where v is the velocity of the upper end of the pole just before it hits the ground.The potential energy of the pole just before it begins to fall is mgh, where m is the mass of the pole, g is the acceleration due to gravity, and h is the height of the center of mass of the pole.

The center of mass of the pole is situated at a height of 0.9 meters above the ground. Therefore, the potential energy of the pole just before it begins to fall is given by PE = mgh + mg(0.9)Since the pole starts to fall from rest, its initial velocity is zero.

Therefore, its final kinetic energy is K = 1/2 mv². According to the law of conservation of energy, the potential energy of the pole just before it begins to fall is equal to the kinetic energy of the pole just before it hits the ground.

Therefore, PE = K or mgh + mg(0.9)

= 1/2 mv²v² = 2gh + 1.8gvmv

= √(2gh + 1.8gv)

= √2gh + √1.8gv,

Where h = 0.9 m, g = 9.8 m/s², and v = mv.

Therefore, mv = √2gh + √1.8gvmv

= √2(9.8)(0.9) + √1.8g(mv)mv - √1.8g(mv)

= √2(9.8)(0.9)mv (1 - √1.8g)

= √(2(9.8)(0.9))v

= √(2(9.8)(0.9))/(1 - √1.8g)

= 5.27 m/s

To learn more about : velocity

https://brainly.com/question/80295

#SPJ11

The pencil will be magnified by a factor of 2.665.

To find the image distance for a concave mirror with a focal length of 0.32m when a pencil is placed 0.2m in front of it, we can use the mirror equation:

1/f = 1/di + 1/do

where:

f = focal length of the mirror = -0.32m (negative because it's a concave mirror)

di = image distance (unknown)

do = object distance = -0.2m (negative because the object is placed in front of the mirror)

Plugging in the values:

1/-0.32 = 1/di + 1/-0.2

Simplifying:

-3.125 = 1/di - 5

1/di = -3.125 + 5

1/di = 1.875

di = 1/1.875

di = 0.533m

Therefore, the image distance is 0.533m.

To find the magnification, we can use the formula:

magnification (m) = - di / do

Plugging in the values:

m = -0.533m / -0.2m

Simplifying:

m = 2.665.

Learn more about concave mirror here:

https://brainly.com/question/3359672

#SPJ1

You can create a total of 7 different combinations of capacitance using all three capacitors in your circuits.

In the event that you are given three distinct capacitors, C1, C2, and C3, you can make a sum of seven unique mixes of capacitance involving every one of the capacitors in your circuits. To work out the quantity of mixes, you can involve the equation for the all out number of blends of n things taken r at a time, which is nCr = n! /(r! * (n-r)!). For this situation, you need to find the all out number of mixes of the three capacitors taken three all at once, so you can utilize the equation as 3C3 = 3! /(3! * (3-3)!), which streamlines to 1. Subsequently, you can make one blend utilizing every one of the three capacitors. Furthermore, you can make three mixes utilizing two capacitors each, and three blends utilizing just a single capacitor each. This gives a sum of seven distinct mixes of capacitance involving each of the three capacitors in your circuits.

To learn more about combinations of capacitance, refer:

https://brainly.com/question/13151593

#SPJ4

Answer:

Temperature

Explanation:

a) The amplitude of the magnetic field is approximately 3.34 x 10^-7 T.

b) The average magnitude of the Poynting vector is approximately 1.12 × 10^5 W/m^2.

A light wave is traveling in a glass of index 1.5. If the electric field amplitude of the wave is known to be 100 V/m,

The amplitude of the magnetic field is given as `B = E/c`,

where E is the amplitude of the electric field, and c is the speed of light in a vacuum (3 × 108 m/s).

Therefore,`B = E/c = 100/(3 × 108) = 3.34 × 10^-7 T`

The average magnitude of the Poynting vector is given as

`Pave = 1/(2μ0) * E^2 * n * c`, where E is the electric field amplitude, n is the refractive index of the glass, c is the speed of light in a vacuum, and `μ0 = 4π × 10^-7 T.m/A` is the permeability of free space.

Substituting the given values, we have;

`Pave = 1/(2 × 4π × 10^-7) * (100)^2 * 1.5 * 3 × 10^8 = 1.12 × 10^5 W/m^2`

Therefore, the average magnitude of the Poynting vector is `1.12 × 10^5 W/m^2`.

To know more about light waves click here:

https://brainly.com/question/29299168

#SPJ11

A wire is formed into a circle having a diameter of 15 cm and is placed in a uniform magnetic field of 2 mt. the wire carries a current of 5 a.  The maximum torque on the wire is approximately 1.767 N·m.

To find the maximum torque on the wire, we can use the formula:

Torque (τ) = μ x B

where μ is the magnetic moment and B is the magnetic field.

First, we need to find the area of the circle formed by the wire. The area A can be calculated using the formula:

A = πr²

where r is the radius of the circle, and since the diameter is 15 cm, the radius will be 7.5 cm (15/2). Now, calculate the area:

A = π(7.5²) ≈ 176.71 cm²

Next, we need to calculate the magnetic moment (μ), which is the product of the current (I) and the area (A):

μ = IA = 5 A × 176.71 cm² ≈ 883.55 A·cm²

Now that we have the magnetic moment and the magnetic field (B = 2 mT = 2 x 10^-3 T), we can find the maximum torque:

τ = μ x B

τ = 883.55 A·cm² × 2 × 10^-3 T

τ  ≈ 1.767 N·m

So, approximately 1.767 N·m. is the maximum torque.

For more such questions on torque, click on:

https://brainly.com/question/17512177

#SPJ11

To calculate the velocity of the car in m/s, we first need to convert the initial velocity from km/h to m/s.

90 km/h = (90 x 1000) / 3600 m/s = 25 m/s (rounded to the nearest whole number)

Next, we can use the formula for velocity:

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken. Since the car comes to a stop, the final velocity is zero. The acceleration can be calculated using the formula:

a = (v-u)/t = (0 - 25)/1.5 = -16.67 m/s²

Substituting the values into the first formula, we get:

0 = 25 + (-16.67) x t

Solving for t, we get:

t = 1.5 seconds

Therefore, the velocity of the car in m/s is zero, since it comes to a complete stop.

To know more about  initial velocity, visit:

https://brainly.com/question/9365999

#SPJ1

Many physical systems in nature are well-described as a simple harmonic oscillator because they exhibit a restoring force that is directly proportional to the displacement from the equilibrium position.

The simple harmonic oscillator is a model that describes the behavior of many physical systems in nature, including springs, pendulums, and vibrating atoms or molecules. This is because many systems in nature can be modeled as having a restoring force that is proportional to the displacement from an equilibrium position and acts in the opposite direction to the displacement.

This restoring force causes the system to oscillate back and forth around the equilibrium position, and the motion of the system can be described using the principles of harmonic motion. Additionally, the equations that describe simple harmonic motion have simple, elegant solutions, making it a useful and widely applicable model in physics. As a result, the simple harmonic oscillator model is often used to describe and analyze a wide range of physical systems in nature.

To know more about simple harmonic oscillator, here

brainly.com/question/13008541

#SPJ4

When it comes to the heat capacity of metals, two important factors are specific heat capacity and mass. It is possible for a sample of a metal with lower specific heat capacity to have a greater heat capacity than a metal with a higher specific heat capacity.

Heat capacity, in general, is the amount of heat that a substance can absorb before its temperature changes. The specific heat capacity is the amount of heat that must be absorbed by one unit of mass of a material to raise its temperature by one degree Celsius or Kelvin. It is a measure of how effectively the material can store heat.

Specific heat capacity is dependent upon the nature of the material itself, the temperature, and the pressure under which the material is measured. This means that two different materials can have different specific heat capacities.

For example, the specific heat capacity of copper is 0.385 J/g·K, while the specific heat capacity of iron is 0.449 J/g·K. This implies that it takes more energy to raise the temperature of iron than copper by the same amount, given the same mass and initial temperature.

Mass, on the other hand, determines how much heat energy is required to raise the temperature of the object. The more mass an object has, the more heat energy it will require to raise the temperature by the same amount.

Therefore, even though a metal might have a lower specific heat capacity, if it has a greater mass, it will have a greater heat capacity than a metal with a higher specific heat capacity and less mass. In conclusion, two metals with different specific heat capacities can have different heat capacities if one has a greater mass than the other.

To know more about metals, refer here

https://brainly.com/question/4701542#

#SPJ11

The magnetic force will act on the charge carrier in a direction perpendicular to both the magnetic field direction and the velocity direction of the charge carrier.

In this scenario, the magnetic field points along the y-axis in a positive direction, and the charge carrier moves along the z-axis in a negative direction. Since the velocity of the charge carrier is in the same direction as the z-axis, the direction of the magnetic force acting on the charge carrier will be perpendicular to both the y-axis and the z-axis.

To determine the direction of the magnetic force, we can use the right-hand rule. If we point the thumb of our right hand in the direction of the velocity of the charge carrier (i.e., along the negative z-axis), and the fingers in the direction of the magnetic field (i.e., along the positive y-axis), then the direction of the magnetic force will be perpendicular to both and will be directed towards the negative x-axis.

Therefore, the magnetic force acting on the charge carrier will be directed towards the negative x-axis.

To know more about magnetic force, refer here:

https://brainly.com/question/3160109#

#SPJ11

The masses of the two objects are 2.92 kg and 2.16 kg, respectively. They attract each other with a gravitational force of magnitude 1.01 10-8 N when the distance between then in 19.7 cm.

Given that: F = 1.01 × 10^-8 N, r = 19.7 cm = 0.197 m, and m1 + m2 = 5.08 kg. Therefore, using the formula for gravitational force: F = Gm1m2 / r²

Where,

F is the force of gravitational attraction between the two objects,

m1 and m2 are the masses of the two objects,

G is the universal gravitational constant (6.674 × 10^-11 Nm^2/kg^2), and

r is the distance between the centers of the objects.

The mass of each object can be found by solving for m1 or m2 from the above equation. So, rearranging the above equation, we get:

m1 = Fr² / Gm2

Substituting the given values, we get:

m1 = (1.01 × 10^-8 N) × (0.197 m)² / (6.674 × 10^-11 Nm^2/kg^2) × (5.08 kg - m1).

On simplifying, we get:

m1 = 2.92 kg

Therefore, the mass of the other object (m2) can be found as follows:

m2 = 5.08 kg - m1 = 5.08 kg - 2.92 kg = 2.16 kg.

Therefore, the masses of the two objects are 2.92 kg and 2.16 kg, respectively found using gravitational force formula.

Know more about gravitational force here:

https://brainly.com/question/12528243

#SPJ11

The difference in radius of motion between the alpha particle and the deuteron in the magnetic field region is (2/3) times the radius of the deuteron.

The radius of motion of a charged particle in a magnetic field is given by the formula:

r = (mv)/(Be)

where r is the radius of motion, m is the mass of the particle, v is its velocity, B is the magnetic field strength, and e is the charge of the particle.

For the alpha particle, using its charge and mass values, we get: r_alpha = (4mv)/(2Be)

For the deuteron, we have:

r_deuteron = (2mv)/(Be)

Taking the difference between these two radii, we get:

r_alpha - r_deuteron = (4mv)/(2Be) - (2mv)/(Be)

r_alpha - r_deuteron = (2mv)/(2Be)

r_alpha - r_deuteron = (mv)/(Be)

We can substitute the expression for r_deuteron to get:

r_alpha - r_deuteron = (mv)/(Be) - (2mv)/(2Be)

r_alpha - r_deuteron = (mv)/(2Be)

Thus, the difference in radius of motion between the alpha particle and the deuteron is proportional to the mass of the particle and inversely proportional to the magnetic field strength and the charge of the particle. As the alpha particle has twice the charge and four times the mass of the deuteron, its radius of motion is (2/3) times that of the deuteron.

To know more about alpha particle, refer here:

https://brainly.com/question/24276675#

#SPJ11

The maximum speed attained by the rod as it falls is 0.181 m/s.

To calculate this, we first need to find the terminal velocity of the rod in the oil. We can use the equation:

Terminal velocity (v) = (2 * weight) / (drag coefficient * fluid density * cross-sectional area * tube diameter)

1. Convert the rod's mass (150 g) to weight (W) using the equation W = mg, where m = 0.15 kg and g = 9.81 m/s². W = 0.15 * 9.81 = 1.4715 N.

2. Determine the cross-sectional area (A) of the rod using the equation A = π(d²) / 4, where d = 0.009 m (0.900 cm converted to meters). A = π(0.009²) / 4 = 6.362 x 10⁻⁵ m².

3. Find the SAE 10 motor oil density (ρ) which is approximately 870 kg/m³ and its drag coefficient (C_d) is about 0.47.

4. Plug the values into the terminal velocity equation: v = (2 * 1.4715) / (0.47 * 870 * 6.362 x 10⁻⁵ * 0.01) = 0.181 m/s.

To know more about terminal velocity click on below link:

https://brainly.com/question/2654450#

#SPJ11

A lead. the bullet is fired into an iron plate, where it deforms and stops. as a result, the temperature of the lead increases by an amount. for an identical bullet hitting the plate with twice the speed, the best estimate of the temperature increase for the identical bullet hitting the plate with twice the speed is twice the initial temperature increase (2 * ΔT).

When a lead bullet is fired into an iron plate, it deforms and stops, causing its kinetic energy to be converted into heat energy. This results in an increase in the temperature of the lead bullet.
Let's denote the initial speed of the bullet as v and its mass as m. The initial kinetic energy (KE) can be calculated using the formula:
KE = 0.5 * m * v^2
Now, when the bullet hits the plate with twice the speed (2v), its kinetic energy becomes:
KE' = 0.5 * m * (2v)^2 = 0.5 * m * 4v^2 = 2 * (0.5 * m * v^2) = 2 * KE
This means the kinetic energy of the bullet is doubled when its speed is doubled. Since the temperature increase (ΔT) is proportional to the kinetic energy, the temperature increase for the identical bullet hitting the plate with twice the speed can be estimated as:
ΔT' = 2 * ΔT
So, the best estimate of the temperature increase for the identical bullet hitting the plate with twice the speed is twice the initial temperature increase (2 * ΔT).

For more such questions on temperature increase

brainly.com/question/26866637

#SPJ11

The mass of the planet is known to be one that would vary according to its density, assuming it has an identical radius to Earth.

When comparing two objects with the same size, their mass will differ if their densities are dissimilar, since density is the measure of mass per unit volume.

Therefore, in the case that the planet's density is equivalent to that of Earth, its mass would parallel Earth's. In the event that the density of the planet surpasses that of Earth, then it would weigh more than Earth due to an increase in its mass. If the density of the planet is lower compared to that of Earth, then its mass would also be lower than that of Earth.

Learn more about Earth from

https://brainly.com/question/15205710

#SPJ1

The maximum kinetic energy of the new pendulum will be larger than that of the original pendulum because the kinetic energy of a simple harmonic oscillator is proportional to the square of its amplitude and the amplitude of the new pendulum will be the same as that of the original pendulum.

Since the new sphere has a greater density, it will move faster at the bottom of its swing, leading to a larger maximum kinetic energy.

A pendulum is a simple mechanical device that consists of a weight suspended from a pivot point or support, allowing it to swing back and forth under the influence of gravity. The weight is known as the bob and the pivot point as the suspension point. The motion of the pendulum is a classic example of harmonic motion, with a constant period that depends only on the length of the pendulum and the acceleration due to gravity.

Pendulums have been used for many purposes, including timekeeping, scientific experiments, and artistic displays. In clocks, the regular motion of a pendulum is used to regulate the movement of gears and hands, providing an accurate measure of time. Pendulums have also been used to study the properties of gravity, as well as to demonstrate concepts in physics such as energy conservation and resonance.

To learn more about Pendulum visit here:

brainly.com/question/14759840

#SPJ4

To find the sphere's radius, we can equate the moments of inertia for the sphere and the cylinder. The moment of inertia for a solid sphere (I_sphere) about its center is given by the equation:

I_sphere = (2/5) * M_sphere * R^2
The moment of inertia for a solid cylinder (I_cylinder) about its axis is given by the equation:
I_cylinder = (1/2) * M_cylinder * radius^2

Given that the mass of the sphere and cylinder are the same (M_sphere = M_cylinder), and their moments of inertia are equal, we can equate the two equations:
(2/5) * R^2 = (1/2) * (3.8^2)

Now, we solve for the sphere's radius, R:
R^2 = (5/4) * (3.8^2)
R^2 ≈ 18.05
R ≈ 4.25 cm

Therefore, the sphere's radius is approximately 4.25 cm.

Learn more about moment of inertia here:

https://brainly.com/question/29415485

#SPJ4

This means that the body stops immediately after the force acting on it becomes zero. Therefore, the correct answer is None of them.

What is Velocity?

Velocity is a physical quantity that describes the speed and direction of motion of an object. It is a vector quantity, which means that it has both magnitude and direction.

To calculate the time taken by the body to stop, we need to use the concept of Newton's second law of motion, which states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

The initial force acting on the body is 45 N, and the frictional force opposing its motion is 7.5 N. Therefore, the net force acting on the body is:

Net force = 45 N - 7.5 N = 37.5 N

Using Newton's second law of motion, we can calculate the acceleration of the body:

Acceleration = Net force / Mass = 37.5 N / 80 kg = 0.469 m/[tex]s^{2}[/tex]

Now, to find the time taken by the body to stop, we can use the equation of motion:

v = u + at

where v is the final velocity, u is the initial velocity (which is zero), a is the acceleration, and t is the time taken.

When the force acting on the body becomes zero, the body continues to move with the same velocity until it comes to a stop. Therefore, the final velocity is also zero.

0 = 0 + 0.469 * t

t = 0 / 0.469 = 0 seconds

Learn more about Velocity from given link

https://brainly.com/question/24445340

#SPJ1

The dam is 80% efficient at converting the water's potential energy to electrical energy. 6155.84 kg of water must pass through the turbines each second to generate 48.0 MW of electricity.

How many kilograms of water must pass through the turbines each second to generate 48.0 MW of electricity? This is a typical value for a small hydroelectric dam.

Firstly, we need to use the formula; Power = Energy/timeThe power output is given as 48.0 MW. Let's convert this to watts.1 MW = 1,000,000 W48.0 MW = 48,000,000 W

The efficiency of the dam is given as 80%. Therefore, the dam is 80% efficient at converting potential energy to electrical energy.

Let the amount of water that passes through the turbines per second be m kg. The potential energy of water = m * g * h

where m = mass of water,

g = acceleration due to gravity,

and h = height of water from the turbine.

m = (Power * efficiency)/(g * h)

We are given g = 9.8 m/s²,

h = 55 m,

and efficiency = 80%

= 0.8m = (48,000,000 * 0.8)/(9.8 * 55)

= 6155.84 kg

Therefore, 6155.84 kg of water must pass through the turbines each second to generate 48.0 MW of electricity.

For more such questions on electrical energy

brainly.com/question/17754867

#SPJ11

The drag force of a boat with a wet surface area of 60ft² and traveling at 7.5mph is approximately 137.72N.

We know that the drag force F varies jointly with the wet surface area A and the square of the speed S. We can express this relationship as F = kAS², where k is a constant of proportionality.

To find k, we can use the given information: A = 50ft², S = 7mph, and F = 98N. Plugging these values into the formula, we get 98 = k(50)(7²). Solving for k, we find that k ≈ 0.04.

Now, we can find the drag force for a boat with a wet surface area of 60ft² and traveling at 7.5mph. Using the formula F = kAS² and the calculated k value, we get F = 0.04(60)(7.5²). Calculating this, we find that the drag force is approximately 137.72N.

To know more about drag force click on below link:

https://brainly.com/question/12774964#

#SPJ11

b) There are four wires: one wire pair for receiving and another for transmitting.

The cause for full-duplex to transmit and receive simultaneously is that there are four wires: one wire pair for receiving and another for transmitting. A full duplex is a communication method used for the transmission of data in both directions. It allows data transmission to occur simultaneously in both directions. Full duplex communication is different from half-duplex communication, where only one direction of data transmission is possible at a time. In full-duplex communication, there are four wires, one pair of wires for transmitting data and another pair of wires for receiving data. The transmitter uses the transmitting pair of wires, and the receiver uses the receiving pair of wires. Since data transmission takes place simultaneously in both directions, the four wires in full-duplex communication are designated for transmitting and receiving data.

Learn more about wires here:

https://brainly.com/question/16452786

#SPJ11

The centripetal acceleration of the ball would be 88.44 m/[tex]s^2[/tex].

The centripetal acceleration (ac) of an object moving in a circle at a constant speed is given by the formula:

ac = (v^2) / r

where v is the speed of the object and r is the radius of the circle.

In this case, the ball is revolving uniformly in a circle of radius 0.75 meters, and it makes 2.0 revolutions per second. To find the speed of the ball (v), we need to convert the number of revolutions per second to the angular velocity (ω) in radians per second:

ω = 2π x (number of revolutions per second)

ω = 2π x 2.0 = 4π radians per second

The speed of the ball (v) is then given by:

Now we can calculate the centripetal acceleration (ac) of the ball:

Therefore, the centripetal acceleration of the ball is approximately 88.44 m/s^2.

More on centripetal acceleration can be found here: https://brainly.com/question/1052267

#SPJ1

To determine in which configuration the box tips over when placed on an inclined plane, consider the following factors:
1. The position of the center of mass (COM) relative to the base of the box.
2. The angle of the inclined plane.
A box will tip over if the line of action of its gravitational force (through the center of mass) falls outside the base of the box.

Following Steps should be followed to determine in which configuration the box tips over :
1. Identify the position of the center of mass (COM) indicated by the dot.
2. Draw a vertical line downwards from the COM (this represents the gravitational force acting on the box).
3. If this vertical line falls within the base of the box, the box will remain stable and not tip over.
4. If the vertical line falls outside the base of the box, the box will tip over.
The box will tip over when its center of mass is positioned such that the gravitational force acts outside the base of the box on the inclined plane.

For similar question on position of the center of mass

https://brainly.com/question/28134510

#SPJ11

a) The required speed of the large fish just after it eats the small one is calculated to be 0.846 m/s.

b) The energy dissipated during this meal is calculated to be 2.097 J.

a) Mass of big fish is given as M = 15 kg

Mass of small fish m = 4.5 kg

The initial speed u of small fish is 0.

The initial speed of the big fish is 1.1 m/s.

From principle of conservation of linear momentum,

Total initial momentum = Total final momentum

Both the fish are said to have same final speed

M U + m u = (M + m) V

15 × 1.1 + 4.5 × 0 = (15 + 4.5) V

16.5 = 19.5 V

V = 16.5/19.5 = 0.846 m/s

Hence, the speed of the large fish after the meal is calculated as 0.846 m/s.

b) Let us calculate the mechanical energy dissipated,

Initial K.E = 1/2 M U² + 1/2 m u² = 1/2 × 15 × 1.1² + 1/2 × 4.5 × 0² = 9.075 J

Final K.E = 1/2 M V² + 1/2 m V² =  1/2 × 15 × 0.846² + 1/2 × 4.5 × 0.846² = 6.978 J

The change in kinetic energy is,

K.Efin - K.Eini = 9.075 - 6.978

ΔK.E = 2.097 J

Thus, the energy dissipated in eating this meal is 2.097 J.

The given question is incomplete. The complete question is 'The initial speed of the big fish is 1.1 m/s.'

To know more about speed:

https://brainly.com/question/15297133

#SPJ4

A baseball tossed in a straight-line path will fall 4.9 meters below the path in 1 second and 19.6 meters below the path in 2 seconds.

When a baseball is thrown, the amount of distance it falls below a straight-line path in 1 second is given by the equation

d = 1/2gt^2,

where d is the distance, g is the acceleration due to gravity, and t is the time.

In the first case, we have t = 1 second, so we can calculate d:

d = 1/2 (9.8 m/s^2)(1 s)^2

d = 4.9 meters.

In the second case, we have t = 2 seconds, so we can calculate d:

d = 1/2 (9.8 m/s^2)(2 s)^2

d = 19.6 meters.

Therefore, a baseball will fall 4.9 meters below the path in 1 second and 19.6 meters below the path in 2 seconds.

For more such questions on straight-line path, click on:

https://brainly.com/question/25881219

#SPJ11

Electrons in subshells closer to the nucleus will feel the greatest effective nuclear charge.

This is because electrons further from the nucleus are partially shielded by the inner electrons and experience a weaker net positive charge. Among electrons in the same principal energy level, the subshell with the highest azimuthal quantum number (l) will feel the greatest effective nuclear charge, because the higher l value corresponds to more angular nodes in the electron probability distribution and hence less shielding by inner electrons.

Therefore, electrons in subshells with a high azimuthal quantum number and low principal quantum number will feel the greatest effective nuclear charge. For example, electrons in the 2p subshell will feel a greater effective nuclear charge than electrons in the 2s subshell.

To know more about electrons, here

brainly.com/question/13752984

#SPJ4

When are the sun's rays perpendicular to the earth's surface at the equator, The Sun's rays are perpendicular to the Earth's surface on the equator during the March equinox and the September equinox.

These are the two periods of the year when the Sun's rays are directly overhead at the equator, resulting in equal lengths of day and night all across the world during the equinoxes. The June solstice and the December solstice are the other two events. Sun's rays are not perpendicular to the Earth's surface at the equator during these solstices, but instead at the Tropic of Cancer and the Tropic of Capricorn.

A perpendicular ray is one that comes at a 90-degree angle. This happens during the equinox. The term "equinox" comes from the Latin word "aequus," which means "equal," and "nox," which means "night." The vernal equinox is the day when the hours of daylight and nighttime are equal. It occurs on or around March 20 or 21.

The autumnal equinox occurs when the hours of day and night are equal. It occurs on or around September 22 or 23.

For more such questions on sun's rays

brainly.com/question/655489

#SPJ11