Openings in the leaves through which gases enter and leave

To solve this we must be knowing each and every concept related to   ideal gas equation. Therefore, the pressure when the volume is doubled is  3atm.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of gas

V= volume of gas

n =number of moles of gas

T =temperature of gas

R = Gas constant = 0.0821 L.atm/K.mol

rearranging the above equation, we get

P₁V₁= P₂V₂

{ (6atm) (10dm[tex]_3[/tex])}  ={ ( P₂) (20dm[tex]_3[/tex])}

P₂ = 3atm

Therefore, the pressure when the volume is doubled is  3atm.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ1

In scientific notation, the result of multiplying an integer between 1 and 10 by a power of 10 is written.For instance, 650,000,000 can be represented as 6.5 108 in scientific notation.

Always set the base to 10. The exponent must be an integer that is non-zero, therefore it can either be positive or negative. The absolute value of the coefficient must be less than ten and more than one.

a system of symbols for designating unique items. Example: In mathematics, the symbol "" stands for "infinity." There are many notations in mathematics.

To know more about scientific notation visit:-

https://brainly.com/question/18073768

#SPJ1

In quartz, silicon has a mass percent of 46.7% while oxygen has a mass percent of 53.3%.

Given the total mass of a sample of quartz (SiO2) (m1) = 5.05g

Mass of silicon (m2) = 2.36g

The percent composition of an element in a chemical compound is referred to as mass percent. Mass percent may be expressed as follows:

mass percent  = mass of element/mass of sample x 100

The percent mass of silicon (p1)  =  2.36/5.05 x100 = 46.7%

The substance was made of silicon and oxygen.

Thus, 100% Quartz =%Silicon +%Oxygen can be used to express the mass percentage of quartz.

100% Quartz = 46.7% + % Oxygen

% Oxygen = 53.3%

Hence the percentages of silicon and oxygen in quartz are 46.7% and 53.3%.

To learn more about silicon click here https://brainly.com/question/28213172

#SPJ4

Answer:

answer is option 2 hope it helps

The step that must be occurred in the calculation of the enthalpy of the given reaction is option B, reverse the second equation, and change the sign of the enthalpy, then add.

The enthalpy of a reaction is the heat energy absorbed or released by the reaction system. For a reaction, the reaction enthalpy can be calculated using the enthalpies of the component reactions.

Here the overall reaction is the formation of CO and H₂ from C and water. The first step is to reverse the second equation and change sign of enthalpy and double the first equation. Then add them, so that the CO₂ get eliminated.

Then, the resultant equation is halved again. Then divide the third equation by two and its enthalpy value also divided by 2. Then add it to the previous one and we get the net equation and corresponding reaction enthalpy.

Therefore, the step that must occur here is option B.

Find more on reaction enthalpy:

https://brainly.com/question/1657608

#SPJ5

In a first-order breakdown reaction, 81.8% of the molecule takes 19.0 min to break down. A compound breaks down in 7.3 minutes by 33%. The human race started to scratch right away.

A means of climbing the food chain. People snatched what they needed from those who were unsuccessful in the same race without regard for anyone else (the producers and the rest of the consumers). First order in both surfactant and acid concentrations, decomposition is a dislocation process of reaction. The process is autocatalytic since acid is produced during the degradation. Reservoir rock, on the other hand, has a sizable absorbing impact.

x = (81.8*7.3)/33 x = 19.0 min

Learn more about reaction here

https://brainly.com/question/28984750

#SPJ4

i) No reactant will be left as all of them have been converted to product after completion of this reaction.

ii) Final percentage of each reactant remaining if each reaction went to completion is about 99.9%.

The difference between the moles (or molecules) of reactants consumed and the moles (or molecules) of products produced in a chemical reaction is known as the molar ratio.

i) Now given the molar ratio of CV : NaOH is 1:1 . That means Equal moles of CV and NaOH are present in the solution. That means all the CV and NaOH molecules will react to form equal number of products.

So in this case, no reactant will be left as all of them have been converted to product after completion of reaction.

ii) In this case, the given NaOH : CV = 1000 : 1. That means per 1000 moles of NaOH, we have only 1 mole of CV. Now since 1 mole of CV can react with only 1 mole of NaOH, then after the reaction of this 1 mole CV, there will be no CV left . And only 999 NaOH molecules will be left in the solution

So here % CV left = 0%

% of NaOH left = 999 / 1000 × 100

% of NaOH left = 99.9 %

To know more about molar ratio visit:

https://brainly.com/question/17920577

#SPJ4

Complete question is attached below

Answer: The volume of the solution formed will be 32.5 L. Explanation: Molarity is defined as the amount of solute present in 1 L of solution. The equation used to determine molarity of the solution follows: We are given: Molarity of the solution = 0.02 mol/L Mass of NaCl = 38 grams Molar mass of NaCl = 58.5 g/mol Putting values in above equation, we get: Hence, the volume of the solution formed will be 32.5 L.

The total volume of the solution will be 21.66 L

A solution is a uniformly dispersed mixture of more than one solute in a solvent. The type of substance under which a solute is dissolved to form a homogenous mixture is called a solvent. The substance that dissolves in a solvent to generate a homogenous mixture is referred to as a solute.

Calculation of volume of the solution with the aid of molarity is shown as:

Molarity = moles of solute / volume of solution in L.

Moles = mass / molar mass.

It is given that, molarity of NaCl = 0.0200 M

Mass of NaCl = 38 g

Molar mass of NaCl = 58.44 g/mol.

Moles of NaCl can be calculated as:

Moles of NaCl = mass of NaCl / molar mass of NaCl

= 38 g/ 58. 44 g/mol

= 0.650 mols.

Volume of NaCl solution can be calculated as:

Molarity = moles of solute / volume of solution in L.

0.0200 M = 0.650 moles/ Volume

Volume = 0.650 moles/ 0.0300 M

Volume = 21.66 L

Therefore, the volume of the solution will be 21.66 L.

To know more about solution click here.

https://brainly.com/question/1416865.

#SPJ2

The peptides amino acids form peptide linkages between -COOH and -NH2 groups in protein.

What do you mean by peptides?

Peptides are short chains of amino acids that are linked together by peptide bonds. They are found in all living organisms and play important roles in many biological processes, such as cell signaling, hormone production, and metabolism. Peptides can range in size from two to hundreds of amino acids and can be made up of different combinations of amino acids.

Peptide bonds are formed when the carboxyl group (COOH) of one amino acid reacts with the amino group (NH2) of another amino acid. This creates a peptide bond, which is a covalent bond between the two amino acids. As proteins are made up of many amino acids, this process of forming peptide bonds is what links the amino acids together to form a protein.

To know more about Peptide,

https://brainly.com/question/21884818

#SPJ4

The student is to weigh out 94.5g of glycerol in accordance with the provided statement.

Glycerin is a kind of carbohydrate known as a polyol, along with other sugar alcohols including sorbitol and erythritol. Glycerin has a complex taste, but unlike sugar I've already discussed—it is not absorbed by the body as sugar and does not raise blood sugar levels. Glycerol may be safe for short-term treatment when taken orally. Headaches, lightheadedness, bloat, nausea, and diarrhea are possible side effects. Glycerol appears to be safe when used topically. It might result in burning, itching, and redness.

1mL = 1cm³

Quantity = 75mL = 75cm³

1.26 g/cm³ is the density.

Mass = ?

Mass is equal to the product of volume and density.

Mass = 1.26 * 75 = 94.5g

To know more about Glycerol visit:

https://brainly.com/question/12093510

#SPJ4

The complete question is-

A chemistry student needs 75.0 mL of glycerol for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of glycerol is 1.26 g.cm⁻³. Calculate the mass of glycerol the student should weigh out. Be sure your answer has the correct number of significant digits.

0.167 is the molarity of the solution. Hence, option B is correct.

A mole is defined as 6.02214076 × [tex]10^{23}[/tex]of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Molar mass of NaOH = 40

40 g of NaOH = 1 mole

5 g of NaOH = 0.125 moles

1000 ml = 1 L

750 ml = 0.75 L

Molarity = 0.125 ÷ 0.75 = 0.1666

Approximately = 0.167

Hence, option B is correct.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ2

If the molar mass of NaOH is 39.9969 g/mol, the molarity of a 750.0 mL solution containing 5.00 g of NaOH solution is 0.167. Hence Option (B) is correct

Molarity is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.

In chemistry, the most commonly used unit for molarity is the number of moles per liter, having the unit symbol mol/L or mol/dm³ in SI unit.

Given ;

       If, 40 g of NaOH = 1 mole

 Then, 5 g of NaOH = 0.125 moles

       If, 1000 ml = 1 L

  Then, 750 ml = 0.75 L

Molarity = 0.125 / 0.75

               = 0.1666

               = 0.167 Approximately

Therefore, If the molar mass of NaOH is 39.9969 g/mol, the molarity of the a 750.0 mL solution containing 5.00 g of NaOH solution is 0.167. Hence Option (B) is correct

Learn more about Molarity here ;

https://brainly.com/question/2817451

#SPJ2

Answer:

Explanation:

A) bubbles show hydrogen gas escaping

B) the water reacted with sodium to form an alkaline solution

Answer:

Pressure = 29.0 psi

Explanation:

Step 1: Given data

Required pressure in the tires (P): 200 kiloPascal

Step 2: Convert the required pressure in the tires to pounds per square inch (psi)

To convert kPa to psi, we need a conversion factor. In this case, we will use the conversion factor 1 psi = 6.89 kPa.

200 kPa × (1 psi/6.89 kPa) = 29.0 psi

200 kPa is equal to 29.0 psi.

Equation I cannot be divided by another factor as it will introduce errors in the equation.

Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.

There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.

Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.

Learn more about errors,here:

https://brainly.com/question/15810279

#SPJ1

Answer:

hi, I haven't done this in a while, but I think this is it!

Explanation:

20

8 Iron Atoms

12 Oxygen Atoms

One of the lab groups unintentionally left a beaker with 1.00 M1.00 M of NaOH solution out on the lab table over night. The molarity of the solution is 3.00 M after evaporation.

The total moles of solute contained in a given volume of solution is referred to as a solution's molarity. In this case, "M" stands for molarity, "n" is the number of moles of solute present in the solution, and "V" is the volume of solution present in a container. A unique kind of homogenous mixture made up of two or more components is known as a solution in chemistry. A solute, or substance that is dissolved in a solvent, is one of the components of such a mixture.

Moles = 1.00/1/3 Moles = 3.00 M

Learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

The elements with the highest ionization energy are the noble gases, which are located in the upper right corner of the periodic table. These elements include helium, neon, argon, krypton, xenon, and radon. These elements have a full valence electron shell, meaning that they have the maximum number of electrons possible in their outermost energy level. This makes them very stable and resistant to chemical reactions, as they do not have any electrons that can be easily removed or added.

As a result, they have very high ionization energy, meaning that a large amount of energy is required to remove an electron and form an ion. Due to these properties, these elements are not readily reactive with other elements and tend to exist as diatomic molecules or as individual atoms. These elements are used in a variety of industrial, medical, and everyday applications such as in lighting, refrigeration, and as inert gases in medical equipment and in the manufacturing of semiconductors.

Learn more about Ionisation Energy here: https://brainly.com/question/27356170

#SPJ4

Explanation:

The advantage of the universal indicator is that it displays a variety of colors over the whole pH scale. This makes it possible to determine an approximate pH of a solution over a range from 1-14. whereas, A commonly used acid-base indicator is litmus.

Answer:

5.55 L

Explanation:

This excersise can be solved by the Boyle's law.

This law for gases states that the pressure of a gas in a vessel is inversely proportional to the volume of the vessel.

P₁ . V₁  = P₂ . V₂

The law comes from the Ideal Gases Law, in the first term.

P . V = n . R . T  In this case, n . R . T are all constant.

6.35 L . 88.6 kPa = 101.3 kPa . V₂

V₂ = (6.35 L . 88.6 kPa) / 101.3 kPa

V₂ = 5.55 L

It is inversely proportional because, as it happened in this case, pressure was increased, therefore volume decreased.

A measuring stick called meterstick or yardstick.

A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or A measuring stick called meterstick or yardstick.  

A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or wood and they often have a metal or plastic joints so that they can be folded together. Metersticks are often rectangular and thin. Metersticks are divided with lines for each millimeter and numerical markings per centimeter. Whereas, yardsticks are often marked with a scale in inches. Measuring stick is also known as ruler. For example: We measure the diameter of a circle with a ruler, and also draw a perfectly straight line using its edge.

To know more about metal here

https://brainly.com/question/28650063

#SPJ4

The triple point of a substance is the temperature and pressure at which all three phases of the substance (solid, liquid, and gas) can coexist in equilibrium.

Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines, which indicates that all three phases can coexist in equilibrium at this point.

1. A triple point of a substance is the temperature and pressure at which all three phases of the substance can coexist in equilibrium.

2. Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines.

3. This indicates that all three phases can coexist in equilibrium at this point.

4. Therefore, the correct statement is that Point B represents the triple point for Bo.

learn more about triple point here

https://brainly.com/question/519191

#SPJ4

The molar mass of H2SO4 is 98.08 g/mol. It is a combination of hydrogen with molecular weight of 1g, sulfur with 32g and oxygen with 16g and the total combination is 2x1+1x32+4x16 = 98g.

Humanity has been aware of oil of vitriol for thousands of years. The chemical name for this material is sulfuric acid, and its molecular formula is H2SO4. It is made up of sulfur, oxygen, and hydrogen molecules. Strong and hygroscopic sulfuric acid (H2SO4) has oxidizing and hygroscopic characteristics. Because it was made by roasting "green vitriol" (iron(II) sulfate) in an iron retort, sulfuric acid was known as "oil of vitriol" by medieval European alchemists. Due to its oily appearance and occurrence in vitreous or glassy substances like ferrous sulphate and alum, it is also known as the "oil of vitriol."

To learn more about sulfuric acid click here https://brainly.com/question/29303579

#SPJ4

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.

In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:

P ∝ T ; P/T = k

Where:

P is the pressure that the gas is applying.

T is the gas's actual temperature, while k is a fixed value.

The tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.

To know more about  Gay-Lussac's law refer to:

https://brainly.com/question/2683502

#SPJ1

Answer:

hggggggggggggggggggggggggggggggggggggsssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss

Explanation:

jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj

Rounded to the nearest significant figure, [tex]\rm 1.5 \times 10^{23 }[/tex] molecules are in 0.25 mole of [tex]\rm CO[/tex]. The correct answer is option B.

A mole is defined as the amount of a substance that contains exactly      [tex]\ \rm 6.022 \times 10^{23}[/tex] 'elementary entities' of the given substance.

To calculate the number of molecules in 0.25 mole of CO, we can use Avogadro's number, which is the number of particles (atoms, molecules, etc.) in one mole of a substance. Avogadro's number is approximately  [tex]\ \rm 6.022 \times 10^{23}[/tex] particles per mole.

Number of molecules = Number of moles x Avogadro's number

Substituting the given values, we get:

Number of molecules = 0.25 mole x [tex]\ \rm 6.022 \times 10^{23}[/tex] molecules/mole

=  [tex]\rm 1.5 \times 10^{23 }[/tex]

Therefore, the number of molecules in 0.25 mole of CO is approximately  [tex]\rm 1.5 \times 10^{23 }[/tex] molecules. Option B is the correct answer.

Learn more about mole here:

https://brainly.com/question/30892840

#SPJ6

Answer:

its correct answer is 22.4 grams

If you perform a melting point test on a metal sample, you would expect to observe that the metal has a relatively high melting point compared to non-metallic materials. This is because of the strong electrostatic forces between the positive nuclei of the metal atoms and the negative electrons, which hold the metal atoms together in a tightly packed lattice structure. As a result, a large amount of energy is required to overcome these forces and melt the metal.

Metal samples are expected to be excellent conductors of heat and electricity when a conductivity test is performed on them. This is because electrons in metallic solids move through the metal fairly easily and are free to move around the lattice structure. This free movement of electrons allows heat and electricity to easily pass through the metal, making it highly conductive.

Learn more about the properties and behavior of metals here: https://brainly.com/question/5190495

#SPJ4

22.2 seconds will it take to selectively plate out of the cations current of 5.0 Amperes.

E∘cell=E∘cathode−E∘anode it is the formula for finding out the net cell potential of the electrolytic cell. We can write the cell reaction to solve the problem in the following way

1. Write down the (two half) reactions.

2. Balance the (half) reactions (Mass and Charge):

a. Start with elements other than H and O. b. Balance O by adding water.

c. balance H by adding H+.

d. Balancing charge by adding electrons.

(3. Multiply each half reaction to make the number of electrons equal.

4. Add the reactions and simplify.)

To know more about current here

https://brainly.com/question/1100341

#SPJ4