Answer:
Osmosis is taking place in the vessel, where a 10% solution of sodium chloride is on one side of the semipermeable membrane and a 2% solution of sodium chloride is on the other side. Osmosis is a special case of diffusion, where water moves from an area of higher concentration to one of lower concentration. In this case, water will move from the 10% solution to the 2% solution, as it has a higher solute concentration. This process is known as osmoregulation and it involves maintaining salt and water balance across membranes within the body’s fluids. The key to remember about osmosis is that water flows from the solution with the lower solute concentration into the solution with higher solute concentration. As such, in this case, water will flow from the 2% solution to the 10% solution.
Explanation:
If the lungs of a child hold 0.11 mol of air in a volume of 2.8 L, then the lungs of an average female adult, with a volume is 4.6 L, can be expected to hold 0.18 mol of air.
show work
Answer:
Explanation:
A childs lung can hold .11mols/ per 2.8 L so that gives us a molarity of .039M
A adults lungs can hold .18 mols /per 4.6 so that gives us .039M aswell meaining that the lung capacity between the two is not different.
What is the volume of 3.00 M sulfuric aid that contain 9.809 g of H2SO4 (98.09g/mol)
Answer:
[tex]V=0.0333L=33.3 mL[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is necessary for us remember that the molarity is calculated by dividing the moles by the volume of the solution in liters so the volume is calculated by dividing moles by the given molarity. However, we first need to calculate the mole given the mass and molar mass of the solute, H2SO4:
[tex]n=\frac{9.809g}{98.09g/mol}=0.1mol[/tex]
Thus, the volume turns out:
[tex]V=\frac{0.1mol}{3.00mol/L}\\\\V=0.0333L=33.3 mL[/tex]
Regards!
Bauxite is best used for making (1 point)
nails
wires
paints
drains
***missed it on test when answered wires****
To solve this we must be knowing each and every concept related to ore and bauxite. Therefore, Bauxite is best used for making wires. The correct option is option B.
What is bauxite?Aluminum's primary source of supply is bauxite. Due to its small weight and ease of molding into fine wire or sheets, aluminum is particularly useful.
All across the world, bauxite may be found. The greatest deposits of this ore are in Australia and Guinea, an African nation. Although bauxite was initially found in France, it may now be found all over the world, such as the Caribbean.
Therefore, Bauxite is best used for making wires. The correct option is option B.
To learn more about bauxite, here:
https://brainly.com/question/4372634
#SPJ1
A red blood cell is placed into each of the following solutions. Indicate whether crenation, hemolysis, or neither will occur.
Solution A: 2.67 % (m/v) NaCl
Solution B: 1.13 % (m/v) glucose
Solution C: distilled H2O
Solution D: 8.69 % (m/v) glucose
Solution E: 5.0% (m/v) glucose and 0.9% (m/v) NaCl
Write each solution to the appropriate bin.
Crenation Hemolysis Neither
Answer:
Following are the responses to the given choices:
Explanation:
The RBC crenation is implied through NaCl by 2,67 percent(m/v) because that solution becomes hypertonic to RBC because of the water within the RBC that passes externally towards the outskirts. RBC thus shrinks.1.13% (m/v), because the low concentration or osmotic that all this solution shows is hypotonic regarding RBC because of the water which has reached the resulting swelling in RBC.Distilled H2 implies hemolytic distillation.Glucose is indicated by crenation at 8.69 percent (m/v).5.0% (m/v) glucose and 0.9% (m/v) (Crenation is indicated by NaCl.v)pls help
1. write the complete chemical symbol for the ion with 14 protons 15 neutrons and 18 electrons
2. write the complete chemical symbol for the ion with 27 protons 32 neutrons and 25 electrons
Answer:
Particle Symbol Mass
electron e- 0.0005486 amu
proton p+ 1.007276 amu
neutron no 1.008665
[H3O+] = 3.6 x 10-2 M
Answer:
Explanation:
Hello there!
In this case, since this concentration of hydronium ions is given, we infer we may calculate that of the hydroxide ions, pH and pOH because no question was specifically given. That is why we proceed as follows:
- pH: Here, we use this concentration to calculate the pH according to the negative logarithm:
[tex]pH=-log(3.6x10^{-2})=1.44[/tex]
Which means that the solution is acidic as the pH is less than 7.
- pOH: since the pH added to the pOH is 14, we can calculate the latter as follows:
[tex]pOH=14-1.44=12.56[/tex]
- Hydroxide concentration: Given the pOH, we apply the antilogarithm to calculate such concentration as shown below:
[tex][OH^-]=10^{-pOH}=10^{12.56}=2.75x10^{-13}M[/tex]
Keep in mind, this is an arbitrary solution because no question was provided.
Regards!
How many grams of silver chromate will precipitate when 250.0 mL of 0.350 M silver nitrate are added to 250.0 mL of 0.450 M potassium chromate?
Answer:
2 AgNO3(aq) + K2CrO4(aq) Ag2CrO4(s) + 2 KNO3(aq)
Explanation:
0.150 L AgNO3 0.500 moles AgNO3 1 moles Ag2CrO4 331.74 g Ag2CrO4 = 12.4 g Ag2CrO4
1 L 2 moles AgNO3 1 moles Ag2CrO4
0.100 L K2CrO4 0.400 moles K2CrO4 1 moles Ag2CrO4 331.74 g Ag2CrO4 = 13.3 g Ag2CrO4
1 L 1 moles K2CrO4 1 moles Ag2CrO4
What is an electrolyte?
a
A-Any type of substance
A salt
A substance that cannot conduct electricity in solution
A substance that can conduct electricity in solution
с
d
Answer:
A substance that can conduct electricity in solution
Calculate the % dissociation of 0.10 M solution of acetic acid (pKa = 4.75)
Given :
Molarity of acetic acid solution, M = 0.10 M.
pKa of acetic acid, pKa = 4.75 .
To Find :
Percentage dissociation of 0.10 M solution of acetic acid.
Solution :
We know, [tex]pK_a = -log\ K_a[/tex]
Taking antilog both side, we get :
[tex]K_a = 1.78\times 10^{-5}[/tex]
Since, acetic acid has 1 hydrogen atom to loose , so it is a monoprotic acid.
Now, percentage dissociation of monoprotic acid is given by :
[tex]\alpha = \sqrt{\dfrac{K_a}{C}}\\\\\alpha =\sqrt{ \dfrac{1.78\times 10^{-5}}{0.1}}\\\\\alpha = 0.0133\times 100 = 1.33 \%[/tex]
Hence, this is the required solution.
What is an extinction event
an object can be considered in motion when it changes only it's direction. true or false?
Answer:
Its false Because it does'snt only show directions and changes there are others too.
Explanation:
hope it helps!!
Answer:
false
Explanation:
it's false because it's in motion
Plz help me : 4.lodine, (two iodine atoms bonded together) is made up of:
all metals
all nonmetals
metal and nonmetal
Answer:
all non metals
Explanation:
iodine is a non metal, and if a metal had bonded with it, it would he considered a metal and non metal. But since two iodine atoms are bonded together, they are both non metals ( I2)
A solution is prepared by dissolving 51 g of salt in 340 g of
water. What is the mass percent of salt?
Answer:
okķkkkkkkkkkkkkkkkkkkkkk.I don't know the answer. GIVE THANKS
Constant Volume
A 10.0L sample of gas in a rigid container at 1.00 atom and 200K is heated to
800K. Assuming that volume remains constant, what is the new pressure of the gas?
After
Can someone help me please
According to the question the new pressure of the gas is: 6.5512 kPa
What is pressure?
Pressure is the force applied to a surface divided by the area of the surface on which the force is applied. It is measured in units of force per unit area, such as pounds per square inch (psi) or pascals (Pa). Pressure can be caused by a variety of factors, such as the weight of air, the weight of a liquid, or the force of a gas. Pressure is an important concept in many fields, including physics, engineering, and chemistry.
The ideal gas law can be used to determine the gas's new pressure:
PV = nRT
where R is the universal gas constant, n is the number of moles, P is the pressure, V is the volume, and T is the temperature.
We know that V = 10.0L, n = 1.00 mole, R = 8.314 J/molK, and T = 800K.
As a result, the gas's new pressure is:
P = (1.00 mol * 8.314 J/molK * 800K) / 10.0L = 6.5512 kPa
To learn more about pressure
https://brainly.com/question/25736513
#SPJ1
You have used 310 L of distilled water for a dialysis patient. How many gallons of water is that?
Answer:
82 gallons
Explanation:
There are 3.785 liters in one gallon. In order to get the amount of gallons, divide the amount of liters by 3.785.
310 L ÷ 3.785 L/gal = 81.89 gallons ≈ 82 gallons
Thomas collected the data in Table 1 to answer a statistical question. Which statistical question does the data in Table 1 answer?
Answer:
how tall each sibling is
Explanation:
bc it says height
(NEED HELP ASAP)
Match the action to the effect on the equilibrium position for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g). (3 points)
1.
Adding a catalyst
2.
Removing hydrogen gas
3.
Increasing the pressure
a.
Shift to the right
b.
Shift to the left
c.
No effect
For the given reaction, according to Le -Chatlier principle adding a catalyst will bring the reaction to the right. Removing the hydrogen gas shift the equilibrium to the left and increasing pressure also shift to right.
What is Le -Chatlier principle ?According to this principle, when some a disorder is affecting the equilibrium of the system. The system balanced the factors which created the disorder and make a new equilibrium.
A catalyst always helps to proceed the reaction in the forward direction. Thus adding a catalyst shift the equilibrium to the right.
If any reactant or produced is removed from the system, the system shifts to the equilibrium to that direction in which they are producing. Removing hydrogen gas will then shift the reaction to the right to produce more hydrogen.
Increasing pressure shift the equilibrium to those direction in which the number of number of moles of gases decreases. Hence, the reaction shifts to the right here.
Find more on chemical equilibrium :
https://brainly.com/question/3920294
#SPJ1
help me i need it asap
Which example is a biotic factor of an aquarium ecosystem?
plastic plants placed in the gravel
algae growing on the glass
rock structure
gravel on the bottom of the aquarium
Which examples are an abiotic factor of an aquarium ecosystem? Select all that apply.
rock structure
temperature of the water
amount of algae on the glass
number of fish
Which example describes an abiotic factor interacting with a biotic factor?
The temperature of the air affecting the wind direction
Water eroding a rock
Cows eating nearby grass
The amount of sunlight affecting the growth of a plant.
Students in Ms. Brown's class are making observations in the garden outside of the school. They make a list of all the abiotic and biotic factors in their notebook. Part of the list is below:
Gravel
Grass
Butterfly
Sunflower
Bird feeder
Flowerpots
Which items on the list are a part of the garden ecosystem?
Grass, butterfly, sunflower
None of the listed items are a part of the ecosystem
All the listed items are part of the ecosystem
Gravel, bird feeder, flowerpots
The biotic factor of an aquarium ecosystem is algae growing on the glass.
The abiotic factors of an aquarium ecosystem are rock structure, temperature of the water, and amount of sunlight.
The example that describes an abiotic factor interacting with a biotic factor is the amount of sunlight affecting the growth of a plant.
All the listed items in Ms. Brown's class, including gravel, grass, butterfly, sunflower, bird feeder, and flowerpots, are a part of the garden ecosystem.
What is an ecosystem?An ecosystem is a community of living organisms (biotic factors) interacting with each other and with their physical environment (abiotic factors) in a specific area. It includes all the living and non-living components of the environment that interact with each other. Examples of ecosystems include a coral reef, a forest, a desert, and even an aquarium or a garden. Ecosystems can be large or small and can be found on land or in water. They are essential for the survival of living organisms as they provide food, shelter, and other resources necessary for life.
Read more on ecosystem here:https://brainly.com/question/842527
#SPJ1
Within an ecosystem,there are levels of organization. Which levels are missing from the diagram below?
Answer:
the missing levels are "population, community"
Match the time frame listed on the left with the characteristic listed on the
right.
Mesozoic era
?
Age of the dinosaurs
End of the
Mesozoic era
?
Most of Earth a desert
End of the
Paleozoic era
?
2
A layer of iridium
deposited all over Earth
mesozoic era - age of the dinosaurs
end of the paleozoic era - most of earth a desert
end of the mesozoic era - a layer of iridium deposited all over earth
The time frame can be matched with characteristic as:
mesozoic era (age of the dinosaurs) paleozoic era (desert)end of the mesozoic era (layer of iridium)What is matching?Matching is the placing of terms with their meaning or their best fit.
From the question, we can see that mesozoic era was associated with age of the dinosaurs, and paleozoic era is associated with earth in desert.
Learn more about matching at:
https://brainly.com/question/17493537
Depression in freezing point of non-electrolyte solution containing 29.5 g of a substance in 100 g of water is 1.6 K. Determine the molar weight of the substance. (Cryometry).
The depression in freezing point of the electrolyte is 1.6 K. The weight of the solute added is 29.5 g. Then the molar mass of the compound is obtained to be 342.93 g/mol.
What is depression in freezing point?Addition of a non-volatile solute into a solvent decreases the freezing point of the solution. The depression in freezing point is calculated as follows:
ΔT = W₂ 1000 Kf / (M W₁)
where W₂ be the mass of solute and W₁ is that of solvent, Kf is called molal depression constant. M be the molar mass of the solute.
Given ΔT = 1.6 K
W₂ = 29.5 g
W₁ = 100 g
Kf of water = 1.86 K/m
Then M = W₂ 1000 Kf / ( ΔT W₁)
M = 29.5 g× 1000 × 1.86 / (1.6 K × 100 g) = 342.9 g/mol
Thus, the molar mass of the solute is 342.9 g/mol.
Find more on depression in freezing point:
https://brainly.com/question/12844810
#SPJ1
how does the name of CaS
differ from the name of CdS?
Answer:
Ca is calcium
Cd is cadmium
Ca in Grp 2
Cd is transition metal
...
Question 6 of 10
Which of the following produces a physical change?
A. Leaving metal outside in the rain until rust forms on its surface
B. Turning wood into ash
C. Melting butter in a microwave
D. Combining carbon dioxide and water to make sugar
SUBMIT
Answer:
uhhh D .-.
Explanation:
Answer:C
Explanation:
HELP HELP URGENT
STRONG ACIDS AND BASES
Answer:
Solution A is correct.
Explanation:
Strong acids or bases are assumed to dissociate completely when in a aqueous solution.
A dairy is mainly involved in the operations of bottling of milk, making ice-cream and limited production of cheese. Calculate the BOD produced per 1000kg of milk processed and its population equivalent from the following data;
Quantity of milk processed daily=150000kg Waste water produced daily =240m3 BOO of waste water =1400mg/I Population equivalent per capita per day of 5-days BOD at 20C°=75g
Answer:
BOD produced per 1000kg of milk processed = (1400mg/I x 240m3) / 150000kg = 0.192mg/I
Population equivalent = (0.192mg/I x 75g) / 5 = 0.576g
Explanation:
Put the levels of ecosystems in order from smallest to largest:
ecosystem, community, individual, population
Reorder answers
1.population
2.ecosystem
3.individual
4.community
When compared to the keto form, the enol form of which of the following compounds is most stable?
1
II
III
IV
V
Which compound's? H is the least acidic?
nitroethane
propanenitrile
propanal
N,N-dimethylacetamide
acetone
Rank the compounds from strongest acids to weakest. To rank items as equivalent, overlap them.
To solve this we must be knowing each and every concept related to tautomerization. Therefore, out of keto and enol form, keto form is mot stable.
What is tautomerization?Tautomers are two structural isomers that are readily inconvertible and vary in the relative locations of their atoms while being in dynamic equilibrium. Tautomers essentially function as structural isomers.
Tautomerization is the term used to describe the tautomerization phenomena. Tautomerization includes the exchange of protons and electrons between molecules. Out of keto and enol form, keto form is mot stable.
Therefore, out of keto and enol form, keto form is mot stable.
To learn more about tautomerization, here:
https://brainly.com/question/15411301
#SPJ1
What is the mass percent of calcium chloride if 57 g of CaCl2 is
dissolved in 334 g of water?
Answer:
Solubility in water Anhydrous: 74.5 g/100 mL (20 °C) Hexahydrate: 49.4 g/100 mL (−25 °C) 59.5 g/100 mL (0 °C) 65 g/100 mL (10 °C) 81.1 g/100 mL (25 °C) 102.2 g/100 mL (30.2 °C) α-Tetrahydrate: 90.8 g/100 mL (20 °C) 114.4 g/100 mL (40 °C) Dihydrate: 134.5 g/100 mL (60 °C) 152.4 g/100 mL (100 °C)
Explain how an anaerobic condition is formed. Indicate the consequence of an anaerobic condition
state types of environment pollution?
Answer:
Air Pollution.
Water Pollution.
Soil/Land Pollution.
Noise Pollution.
Radioactive Pollution.
Explanation: