Part 1 of 3
O Points: 0 of 1
A manufacturing company makes two types of water skis, a trick ski and a slalom ski. The relevant manufacturing
data are given in the table.
Labor-Hours per Ski
Trick Ski
9
1
Department
Fabricating
Finishing
Answer parts (A), (B), and (C) below.
Slalom Ski
6
1
Save
Maximum Labor-Hours
Available per Day
432
63
(A) If the profit on a trick ski is $60 and the profit on a slalom ski is $50, how many of each type of ski should be
manufactured each day to realize a maximum profit? What is the maximum profit?
The maximum profit is $. The maximum occurs when
trick skis and
slalom skis are produced.

Answer:

1,469 [tex]m^{2}[/tex]

Step-by-step explanation:

The volume of a rectangular prism is given by the following:

V = Bh, where B is the area of the base and h is the height.

In this problem, we are given that the volume is 23,504 [tex]m^{3}[/tex] and the height is 16 m.

23,504 [tex]m^{3}[/tex] = B × 16 [tex]m[/tex]

Dividing both sides by 16, we get:

B = 23,504 [tex]m^{3}[/tex]  / 16 [tex]m[/tex] = 1,469 [tex]m^{2}[/tex]

Therefore, the value of B, the area of the base, is approximately 1,469 [tex]m^{2}[/tex].

The probability that at most 20 freshmen out of 85 plan to major in STEM is approximately 0.2420.

What is probability?

Probability is a measure of the likelihood or chance of an event occurring. It is a number between 0 and 1, with 0 representing an impossible event and 1 representing a certain event. The probability of an event is calculated by dividing the number of ways the event can occur by the total number of possible outcomes.

We can use the normal distribution to find probabilities related to STEM majors.

Let X be the number of freshmen out of 85 who plan to major in a STEM discipline. We are given that p = 0.27 is the proportion of freshmen who plan to major in STEM.

Then, X follows a binomial distribution with parameters n = 85 and p = 0.27.

The mean of the distribution is given by μ = np = 85 × 0.27 = 22.95.

The standard deviation of the distribution is given by σ = sqrt(np(1-p)) = sqrt(85 × 0.27 × 0.73) ≈ 4.27.

To find the probability that at most 20 freshmen plan to major in STEM, we can use the normal approximation to the binomial distribution:

P(X ≤ 20) ≈ P(Z ≤ (20 - 22.95) / 4.27) ≈ P(Z ≤ -0.697)

Using a standard normal distribution table or calculator, we find that P(Z ≤ -0.697) ≈ 0.2420.

Therefore, the probability that at most 20 freshmen out of 85 plan to major in STEM is approximately 0.2420.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ1

The value of the unknown term in the given triangle that satisfied the relation of angle bisector theorem is 9.

What about angle bisector theorem?

The angle bisector theorem is a fundamental theorem in geometry that relates the lengths of the sides of a triangle to the lengths of the segments formed by the intersection of an angle bisector with the opposite side.

Specifically, the angle bisector theorem states that the length of the segment of the side of a triangle that is opposite to the bisected angle is proportional to the lengths of the other two sides of the triangle. More precisely, if AD is the bisector of angle BAC in triangle ABC, then:

BD/DC = AB/AC

where BD and DC are the lengths of the segments of side BC that are adjacent to point A, and AB and AC are the lengths of the sides opposite to angles B and C, respectively.

This theorem is useful in many geometric constructions and proofs, and can be applied to various problems involving triangles and their properties.

According to the given information:

Using the concept of height and distance we have that,

[tex]tan(y) = \frac{4}{12} \\\\tan(2y) = \frac{2tany}{1-(tany)^{2} }[/tex]

In the given figure of triangle the value of tan(2y) = [tex]\frac{4+x}{12}[/tex]

So, when we correlate all of them we have that

[tex]\frac{2*\frac{4}{12} }{1-(\frac{4}{12}) ^{2} } = \frac{4+x}{12} \\\\x = 5[/tex]

So, the length of the unknown part is 9.

To know more about angle bisector visit:

https://brainly.com/question/12896755

#SPJ1

The value of 8 9/14 divided by 12 is

The first step is to convert the mixed fraction to a proper fraction

8 9/14

= 121/14

The next step is to divide the proper fraction by 12

121/14 ÷ 12

= 121/14 × 1/12

= 121/168

= 0.720

Hence the value of 8 9/14 divided by 12 is 0.720

Read more on value here

https://brainly.com/question/10361935

#SPJ1

the closest answer choice to this value is 372.32 yd2.

How to solve the question?

The given shape is a trapezoid, where the two parallel sides are the base and the top, and the height is the perpendicular distance between them. We can divide this trapezoid into a rectangle and a right triangle, as shown below:

 A (bottom     B (bottom

 left vertex)   right vertex)

We can find the length of the top side by adding the portions given on each side of the perpendicular, as follows:

top side = 6.4 yards + 14.9 yards = 21.3 yards (same as the base)

The area of the rectangle (ABCD) is the product of the base (21.3 yards) and the height (12.8 yards):

area of rectangle = 21.3 yards * 12.8 yards = 272.64 square yards

The area of the right triangle (BCD) is half the product of the height (12.8 yards) and the difference between the base and the top (21.3 yards - 6.4 yards = 14.9 yards):

area of triangle = 0.5 * 12.8 yards * 14.9 yards = 95.36 square yards

Therefore, the total area of the figure is the sum of the area of the rectangle and the area of the triangle:

total area = 272.64 square yards + 95.36 square yards = 368 square yards

Therefore, the closest answer choice to this value is 372.32 yd2.

To know more about trapezoid Visit :-

https://brainly.com/question/1410008

#SPJ1

The area of the sector OPR is approximately 5.20 cm².

What is an area?

First, we need to find the length of PR. Since O is the center of the circle, we know that OP and OR are both 6 cm long (the radius of the circle). By the triangle inequality, we have:

PR < OP + OR = 6 + 6 = 12

Since QR = 14, we have:

PR > QR - OP - OR = 14 - 6 - 6 = 2

Therefore, 2 cm < PR < 12 cm.

Next, we can use the formula for the area of a sector of a circle:

A = (θ/360)πr²

where A is the area of the sector, θ is the central angle of the sector (in degrees), and r is the radius of the circle.

To find the central angle θ, we can use the law of cosines:

(PR)² = (OP)² + (OR)² - 2(OP)(OR)cos(θ)

Substituting in the known values, we get:

(PR)² = 6² + 6² - 2(6)(6)cos(θ)

(PR)² = 72 - 72cos(θ)

cos(θ) = (72 - (PR)²)/72

Using the known values, we have:

cos(θ) = (72 - (PR)²)/72 = (72 - x²)/72

where x is the length of PR.

Since OPQ is a triangle, we know its area:

25 = (1/2) base × height

25 = (1/2) QR × OP

25 = (1/2) (14) × 6

25 = 42

Therefore, the height of triangle OPQ is:

height = (2)(25)/QR = (2)(25)/14 = 25/7

The height of the triangle is also the distance from O to the line PQ, which is also the distance from O to the chord PR. Therefore, the area of sector OPR can be calculated as follows:

A = (θ/360)πr² = (θ/360)π(6)²

A = (θ/360)(36π) = (θ/10)π

where θ is the central angle of the sector in degrees. To find θ, we can use the formula:

sin(θ/2) = (PR/2)/r = x/6

Substituting in the known values, we get:

sin(θ/2) = x/6

θ/2 = [tex]sin^{-1}[/tex](x/6)

θ = 2[tex]sin^{-1}[/tex](x/6)

Finally, substituting this value of θ into the formula for the area of the sector, we get:

A = (θ/10)π = [2[tex]sin^{-1}[/tex](x/6)]/10 * π

To find the value of x that gives the area of the sector, we can use trial and error or a numerical solver. Using a calculator, we find that x ≈ 5.5 cm gives an area of the sector of:

A ≈ 5.20 cm²

Therefore, the area of the sector OPR is approximately 5.20 cm².

To know more about area, visit:

https://brainly.com/question/11952845

#SPJ9

Answer:

I think 241.6 is you answer

Step-by-step explanation:

I hope I helped! to get the answer first you have to convert 5/8 into a whole number but 5/8 can never be a whole number so make it a decimal which equals to 0.625 then divide 151 / 0.625 and you should get 241.6 as your answer

The greatest number of plants that can be put in one row is 315. We can have 45 rows of roses, 27 rows of lilies, or 21 rows of chili plants, each with 315 plants in a row.

To find the greatest number of plants that can be put in one row, we need to find the greatest common factor (GCF) of 45, 81, and 63.

First, we can find the prime factorization of each number:

45 = 3 x 3 x 5

81 = 3 x 3 x 3 x 3

63 = 3 x 3 x 7

Then, we can identify the common factors:

The factors of 45 are 3 and 5

The factors of 81 are 3 and 3

The factors of 63 are 3 and 3

The greatest common factor is the product of the common factors raised to their lowest power:

GCF = 3^2 x 5 x 7 = 315

Therefore, the greatest number of plants that can be put in one row is 315. We can have 45 rows of roses, 27 rows of lilies, or 21 rows of chili plants, each with 315 plants in a row.

Learn more about greatest common factor at https://brainly.com/question/219464

#SPJ1

The segments KM and JN are parallel because the ratio LK : KJ = LM : MN are equivalent

from the question, we have the following parameters that can be used in our computation:

The triangle

To determining whether KM || JN, we make use of the following ratio

LK : KJ = LM : MN

Substitute the known values in the above equation, so, we have the following representation

8 : 5 = 12 : 7.5

Express as fraction

5/8 = 7.5/12

Simplify

So, we have

0.625 = 0.625

This means that KM || JN

Read more about parallel segments at

https://brainly.com/question/15524487

#SPJ1

Answer:

[tex]4x^2[/tex]+8x-21

Step-by-step explanation:

First foil 2x to 2x to get [tex]4x^{2}[/tex].
Then, foil 2x to 7 to get 14x.
Then, foil -3 to 2x to get -6x.
Then, foil -3 to 7 to get -21.
After doing all of that, you will get [tex]4x^2[/tex]+14x-6x-21.
Simplify it, so your final answer is [tex]4x^2[/tex]+8x-21

Answer:

-9 < m - 12

Step-by-step explanation:

When you multiply or divide an inequality by a negative number, you flip the inequality sign.

Helping in the name of Jesus.

Answer: 430.00

Step-by-step explanation:

So.

3x^2-2x+3.

Replace x with 7

(3·7)^2-(2·7)+3

Multiply within the parenthesis

21^2-14+3

Take care of exponent

441-14+3

Solve the rest.

430

If you did it right, you would get 430 as the end result.

Happy Solving

Option B is the correct option for the total area of the shape which is approximate 8049 ft².

An isosceles triangle is a polygon with three sides, where two of the sides have equal length.

Suppose the equal sides of Isosceles triangle is 'a',

so we can say that by Isosceles triangle rule: 70 = a√2

or side of Isosceles triangle (a) = 35√2 ft         (by Pythagoras theorem)

Area of isosceles triangle (A₁) = [tex]\frac{1}{2}[/tex] × (Side of Isosceles triangle)²

                                                 = [tex]\frac{1}{2}[/tex] × (35√2)² = 1225 ft²

Area of two square (A₂) =  2 × a × a

                                       = 2 × 35√2 × 35√2  = 4900 ft²

Area of quadrant circle (A₃) = (πr²)/4

                                              = 3.14 × (35√2)² × (1/4) = 1923.25 ft²

Total area of the shape = A₁ + A₂ + A₃

                                       = 1225 + 4900 + 1923.25 = 8048.25 ft²

Therefore, the total area of the shape is approximate 8049 ft²

To know more about triangle, visit:

https://brainly.com/question/17815056

#SPJ1

Answer:

v = 2√2

u = 4

Step-by-step explanation:

Use trigonometry:

[tex] \tan(45°) = \frac{v}{2 \sqrt{2} } [/tex]

Cross-multiply to find v:

[tex]v = 2 \sqrt{2} \times \tan(45°) = 2 \sqrt{2} \times 1 = 2 \sqrt{2} [/tex]

Use the Pythagorean theorem to find u:

[tex] {u}^{2} = {v}^{2} + ( {2 \sqrt{2} )}^{2} [/tex]

[tex] {u}^{2} = ( {2 \sqrt{2}) }^{2} + ({2 \sqrt{2}) }^{2} = 4 \times 2 + 4 \times 2 = 8 + 8 = 16[/tex]

[tex]u > 0[/tex]

[tex]u = \sqrt{16} = 4[/tex]

Answer:

Step-by-step explanation:

Find the surface area of a cylinder with a height of 7in and a bass radius of 2in. Use the value 3.14 for π, , and do not do any rounding.

A=2πrh+2πr2=2·π·2·7+2·π·2²=

not rounded 113.09734  

Rounded 113.1

Answer:The probability that a shopper buys shoes and a book is 0.015

Step-by-step explanation:

density = 693.79 kg/[tex]m^3[/tex] (approx)

The density of the block of wood can be calculated using the formula:

density = mass / volume

To find the volume of the block of wood, we need to multiply its length, width, and height:

volume = length x width x height

volume = 6.0 cm x 4.2 cm x 8.6 cm

volume = 217.08 cm^3

We need to convert the volume to cubic meters and the mass to kilograms to use the density of glass, which is typically given in kg/m^3:

volume = 217.08 cm^3 = 0.00021708 m^3

mass = 150.5 g = 0.1505 kg

Now we can calculate the density of the block of wood:

density = mass / volume

density = 0.1505 kg / 0.00021708 [tex]m^3[/tex]

density = 693.79 kg/[tex]m^3[/tex] (approx)

Keep in mind that the density of wood varies depending on its moisture content and type, but it is typically lower than that of glass, which is between 2500 and 3000 kg/[tex]m^3[/tex].

know more about volume visit :

https://brainly.com/question/24086520

#SPJ9

The line of fit y = -4.2x + 100 shows a negative correlation between the distance traveled and the remaining charge on the battery of the motorized wheelchair.

The slope of the line is -4.2, which means that for every one unit increase in distance traveled, the remaining charge on the battery decreases by 4.2 units.

The y-intercept of the line is 100, which means that when the distance traveled is zero, the remaining charge on the battery is 100.

The line of fit can be used to make predictions about the remaining charge on the battery for a given distance traveled.

Based on the scatter plot, we can see that there is a negative correlation between the distance traveled and the remaining charge on the battery. As the distance traveled increases, the remaining charge on the battery decreases.

Overall, the line of fit provides a way to estimate the remaining charge on the battery for a given distance traveled based on the data shown in the scatter plot.

To learn more about distance please click on below link        

https://brainly.com/question/28354920

#SPJ1

The marginal cost is the derivative of the cost function.

Option C is the correct answer.

Marginal cost is the additional cost incurred by a firm or producer when producing one more unit of a good or service.

It is the cost of producing an additional unit of output.

We have,

Marginal cost is a concept in economics that describes the additional cost of producing one additional unit of output.

It is calculated as the derivative of the total cost function with respect to the quantity produced.

In other words, if the total cost function is represented as C(q), where q is the quantity of output produced, then the marginal cost (MC) function is given by:

MC(q) = dC(q) / dq

The derivative represents the rate of change of the cost function with respect to the quantity produced, which gives the additional cost of producing one more unit of output.

For example, if a company produces 100 units of a product at a total cost of $1000, and then produces 101 units of the same product at a total cost of $1020, the marginal cost of producing the 101st unit is $20, which is the difference in cost between producing 100 units and producing 101 units.

Thus,

The marginal cost is the derivative of the cost function.

Learn more about marginal cost here:

https://brainly.com/question/28932883

#SPJ2

The complete question.

Complete the following sentence.

The marginal cost is the derivative of the ________ function.

A) Utility.

B Income.

C) Cost.

D Demand.

Answer: The probability that both televisions work is approximately 0.746, or 74.6%.

Step-by-step explanation:

To calculate the probability that both televisions work, we need to find the probability of selecting a working television, and then multiply that by the probability of selecting another working television from the remaining televisions.

Since 2 out of the 14 televisions are defective, that means there are 12 working televisions out of 14. So the probability of selecting a working television on the first draw is 12/14.

After the first television is selected, there will be 13 televisions left, with 11 working televisions. So the probability of selecting a second working television is 11/13.

Therefore, the probability that both televisions work is:

(12/14) x (11/13) = 0.746

So the probability that both televisions work is approximately 0.746, or 74.6%.

To calculate the probability that at least one of the two televisions does not work, we can use the complement rule. The complement of the event "both televisions work" is the event "at least one television does not work."

So, the probability that at least one television does not work is:

1 - 0.746 = 0.254

So the probability that at least one television does not work is approximately 0.254, or 25.4%.

Answer:

0.60, 0.40

Step-by-step explanation:

The probability that a television works is 11/14. The probability that a television is

defective is 3/14.

The probability that the first TV works and the second works is

[tex]\frac{11}{14}[/tex]×[tex]\frac{10}{13}[/tex]

(If the first selected TV works, the total number of televisions left is 13, and the

the number of working TV is 10).

Answer: 0.60.

The event that at least one of the two televisions does not work is the

opposite of the event ‘both TV work’. So the probability of at least one of the

two televisions does not work is

1- Pr (both works)= 1 − 11/14 ∙ 10/13 = 0.40.

Answer: 0.40.

Answer:

C. 3 x 4

There's not really a way to explain it. If you still have questions, I would recommend asking your teacher or someone you can trust.

The second row and second column's frequency, C. 81, is a marginal frequency (the column total for the second column).

The frequency distribution statistics method identifies the frequency with which a given value or variety of values exists in a data set. The process is dividing the data into intervals, or "bins," and counting a number of values that fall within every bin.

A graph, such as a statistic or a frequency polygon, can be used to show the frequency distribution. The table displays the categories or intervals as well as the frequency or count for each interval.

The y-axis on the graph represents frequencies, while the x-axis represents intervals. The bars or polygons on the graph reflect the count or % of data within every interval.

given

The totals for each row and column make up the marginal frequencies in the table.

The frequencies for each category in the first variable are represented by the row totals, while the frequencies in the second variable are represented by the column totals.

In order to choose a marginal frequency from the available options:

A. The frequency of 23, which is not a marginal frequency, is in the first row and first column.

B. 46 is not a marginal frequency; it is the frequency in the first row and second column.

The second row and second column's frequency, C. 81, is a marginal frequency (the column total for the second column).

D. A marginal frequency is represented by the frequency in the second row and third column (the column total for the third column).

Options C and D therefore have negligible frequencies.

To know more about frequency distribution visit:

brainly.com/question/14926605

#SPJ9

Answer:

x = 5/6

Step-by-step explanation:

Combine multiplied terms into a single fraction, Multiply by 1, Find common denominator, Combine fractions with common denominator, Multiply all terms by the same value to eliminate fraction denominators, Cancel multiplied terms that are in the denominator, DistributeMultiply the numbers, Subtract  from both sides, and then Simplify the expression.

The answer of the given question based on inequality is (1) D , (2) B . (3) A , (4) C

A number line is a visual representation of the real numbers in a linear format. It is a straight line that is divided into equal segments or intervals, each of which represents a specific value on the number scale.

Number lines are usually oriented horizontally, with negative numbers to the left of zero and positive numbers to the right of zero. The distance between each point on the line is usually consistent, which means that the scale is evenly spaced.

For the first inequality, 7x/9 > -14/3, we can start by multiplying both sides by 9 to eliminate the fraction:

7x > -42

x > -6

So the solution to this inequality is x > -6, which means that all values of x greater than -6 satisfy the inequality.

For the second inequality, -75x/4 > 225/2, we can start by multiplying both sides by -4 to eliminate the fraction and flip the inequality:

75x < -450

x < -6

However, we need to remember to flip the inequality back since we multiplied both sides by a negative number:

x > 6

So the solution to this inequality is x > 6, which means that all values of x greater than 6 satisfy the inequality.

For the third inequality, x/4 <= -3/2, we can start by multiplying both sides by 4 to eliminate the fraction:

x <= -6

So the solution to this inequality is x <= -6, which means that all values of x less than or equal to -6 satisfy the inequality.

For the fourth inequality, 2x/3 > -16/3, we can start by multiplying both sides by 3 to eliminate the fraction:

2x > -16

x > -8

So the solution to this inequality is x > -8, which means that all values of x greater than -8 satisfy the inequality.

Now, let's match each inequality to the number line that represents its solution:

The first inequality, 7x/9 > -14/3, corresponds to the number line with an open circle at -6 and an arrow pointing to the right, indicating that all values of x greater than -6 satisfy the inequality.

The second inequality, -75x/4 > 225/2, corresponds to the number line with an open circle at 6 and an arrow pointing to the left, indicating that all values of x less than 6 satisfy the inequality.

The third inequality, x/4 <= -3/2, corresponds to the number line with a closed circle at -6 and an arrow pointing to the left, indicating that all values of x less than or equal to -6 satisfy the inequality.

The fourth inequality, 2x/3 > -16/3, corresponds to the number line with an open circle at -8 and an arrow pointing to the right, indicating that all values of x greater than -8 satisfy the inequality.

So the correct pairs are:

7x/9 > -14/3: ( )-------------●--->

-75x/4 > 225/2: <---●-------------( )

x/4 <= -3/2: [ ●]--------------<--

2x/3 > -16/3: ( )-------------●--->

To know more about Real numbers visit:

https://brainly.com/question/19593471

#SPJ1

Answer:

81

Step-by-step explanation:

(1 + 2)⁴

1⁴ + 4(1³ × 2) + 6(1² × 2²) + 4(1 × 2³) + 2⁴

1 + 4(2) + 6(4) + 4(8) + 16

1 + 8 + 24 + 32 + 16

= 81

The quadratic function representing the area of ​​the photo and the frame is A(x) =  1.7x²+ 16.2x + 36

When calculating a rectangle's area, we multiply the length by the width of the rectangle.

Area of rectangle = length × breadth

To represent the  photo and frame area, we need to add the photo area  to the frame area. Since the frame is 3 inches wide on all sides, the photo dimensions are reduced by 6 inches in both  length and  width. Therefore the length of the photo with the frame is (x 6) inches and the width is (1.7 x 6) inches. Thus, the area of ​​the photo and the frame can be represented by a quadratic function:

A(x) = (x 6) (1.7 x 6)

Expanding this expression, we get:

A(x) =  1.7x² + 16.2x + 36

So the quadratic function representing the area of ​​the photo and the frame is A(x) =  1.7x²+ 16.2x + 36

Learn more about How to find Area of rectangle here

https://brainly.com/question/1235231

#SPJ1

Let's break down the problem into steps to solve it:

Calculate the interest for the first 2 years:

The formula for compound interest is A = P(1 + r/n)^(nt), where A is the final amount, P is the principal, r is the annual interest rate, n is the number of times the interest is compounded per year, and t is the time period in years.

In this case, P = Rs 45,000, r = 10%, n = 1 (compounded annually), and t = 2 years.

So, A = 45000(1 + 0.1/1)^(1x2) = Rs 59,049

Therefore, the interest for the first 2 years is Rs 59,049 - Rs 45,000 = Rs 14,049

Calculate the remaining principal:

Ram paid one third of the principal at the end of 2 years, which is (1/3) x Rs 45,000 = Rs 15,000.

So, the remaining principal after 2 years is Rs 45,000 - Rs 15,000 = Rs 30,000

Calculate the interest for the next 2 years:

Since Ram paid off the remaining principal and interest at the same rate at the end of the next 2 years, the interest rate will still be 10%.

So, the interest for the next 2 years will be:

A = 30,000(1 + 0.1/1)^(1x2) = Rs 39,690

Therefore, the interest for the next 2 years is Rs 39,690 - Rs 30,000 = Rs 9,690

Calculate the total amount Ram paid at the end of 4 years:

To clear his debt, Ram paid the remaining principal (Rs 30,000) and the interest for the next 2 years (Rs 9,690).

So, the total amount he paid at the end of 4 years is Rs 30,000 + Rs 9,690 = Rs 39,690.

Therefore, Ram paid Rs 39,690 at last to clear his debt.