Part A: The angular momentum of an object is conserved if there is no net torque acting on it.
Part B: The angular momentum of an object depends on the following factors:
a. The axis of rotation: The choice of axis around which the object rotates affects its angular momentum.
b. The shape of the object: The distribution of mass within the object and its shape impact its angular momentum.
c. The mass of the object: Objects with larger masses tend to have greater angular momentum.
d. The rate at which the object rotates: The angular velocity, which represents the rate at which the object rotates, affects its angular momentum. Higher angular velocities result in higher angular momentum.
Therefore, the factors that affect the angular momentum of an object are:
The axis of rotationThe shape of the objectThe mass of the objectThe rate at which the object rotatesTo know more about angular momentum refer here
https://brainly.com/question/29897173#
#SPJ11
Four students made a graphic organizer describing the parts of the atom. which table best describes the parts of the atom? a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries positive, 0, negative. the last column is labeled location with entries outside nucleus, outside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries negative, 0, negative. the last column is labeled location with entries inside nucleus, outside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries 0, negative, positive. the last column is labeled location with entries outside nucleus, inside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries positive, negative, 0. the last column is labeled location with entries inside nucleus, outside nucleus, inside nucleus.
The best table to describe the parts of the atom is a 3 column table with 3 rows. The first column is labeled Particle and contains the entries Proton, Electron, and Neutron.
What is atom?Atom is an open source, cross-platform text editor developed by GitHub. It is a hackable text editor that can be customized to suit the user’s needs and preferences. It is based on Electron, a framework for building cross-platform applications using web technologies such as HTML, CSS and JavaScript. Atom supports multiple panes, allowing users to open and edit multiple files at the same time. It also offers syntax highlighting for a range of programming languages, a built-in package manager for adding new packages, and a selection of themes to customize the look of the editor.
The second column is labeled Charge and contains the entries Positive, 0, and Negative. The last column is labeled Location and contains the entries Inside Nucleus, Outside Nucleus, and Inside Nucleus.
To learn more about atom
https://brainly.com/question/621740
#SPJ4
A toy car has a 1. 5-a current, and its resistance is 2. How much voltage does the car require? v.
The voltage required by the toy car is 3 volts.
Ohm's Law states that the voltage (V) across a resistor is equal to the product of the current (I) flowing through it and the resistance (R). Mathematically, it can be expressed as:
V = I * R
In this case, we are given that the current (I) flowing through the toy car is 1.5 A (amperes), and the resistance (R) of the car is 2 Ω (ohms).
Substituting these values into the equation, we can calculate the voltage (V) required by the car:
V = 1.5 A * 2 Ω
V = 3 V
So, the voltage required by the toy car is 3 volts. This means that to operate the toy car properly, a power source or battery with a voltage output of 3 volts is needed.
The voltage provides the electrical potential necessary for the current to flow through the car's circuit, overcoming the resistance and powering the car's motor or other components.
To know more about voltage refer here
brainly.com/question/32002804#
#SPJ11
a stationary magnet has its north pole pointing upward. a conducting circular loop is moving downwards beneath the magnet. the induced current in the coil, as seen from above, and the force on the conducting loop due to the magnet are:
As the loop moves away from the magnet, the force weakens and is greatest when it is directly beneath the magnet.
When a conducting circular loop moves downwards beneath a stationary magnet with its north pole pointing upward, an induced current is produced in the loop. This induced current flows in a counterclockwise direction, as seen from above.
Additionally, the loop experiences a force due to the magnet. This force is perpendicular to both the direction of motion of the loop and the direction of the magnetic field produced by the magnet. The force is given by the formula F = BIL, where B is the strength of the magnetic field, I is the current induced in the loop, and L is the length of the loop that is in contact with the magnetic field.
Since the loop is moving downwards, the force on it is upwards, opposite to the direction of motion. The force is strongest when the loop is directly under the magnet and decreases as the loop moves away from the magnet.
To learn more about : magnet
https://brainly.com/question/14997726
#SPJ11
A 4. 00-kg model rocket is launched, shooting 50. 0 g of burned fuel from its exhaust at an average velocity of 625 m/s. What is the velocity of the rocket after the fuel has burned? (Ignore effects of gravity and air resistance. )
A 4. 00-kg model rocket is launched, shooting 50. 0 g of burned fuel from its exhaust at an average velocity of 625 m/s: the velocity of the rocket after the fuel has burned is approximately -7.81 m/s.
Initially, the rocket and fuel have a combined mass of 4.00 kg + 0.050 kg (converting 50.0 g to kg). The initial velocity is 0 m/s since it hasn't launched yet. After the fuel is burned, the remaining mass of the rocket is 4.00 kg, and we want to find its final velocity (v).
According to the conservation of momentum, the initial momentum of the system must equal the final momentum. So, (initial mass) * (initial velocity) = (final mass) * (final velocity). In this case:
(4.050 kg) * (0 m/s) = (4.00 kg) * (v) + (0.050 kg) * (625 m/s)
0 = (4.00 kg) * (v) + 31.25 kg*m/s
To find the final velocity of the rocket (v), we'll isolate it in the equation:
(4.00 kg) * (v) = -31.25 kg*m/s
v = (-31.25 kg*m/s) / (4.00 kg)
v ≈ -7.81 m/s
The velocity of the rocket after the fuel has burned is approximately -7.81 m/s. The negative sign indicates that the direction of the rocket's velocity is opposite to that of the exhaust.
To know more about velocity, refer here:
https://brainly.com/question/1482529#
#SPJ11
A ball is rolling along the ground. The instantaneous velocity at this moment is 4. 81 m/s and it has 788. 1J of kinetic energy. What is the mass of the ball?
The mass of the ball is approximately 68.1 kg. To find this, we used the kinetic energy formula, substituted the given values, and solved for the mass.
We are given the instantaneous velocity (v) of the ball as 4.81 m/s and its kinetic energy (KE) as 788.1 J. Our goal is to find the mass (m) of the ball.
1. We'll use the formula for kinetic energy: KE = 0.5 * m * v^2.
2. Substitute the given values: 788.1 J = 0.5 * m * (4.81 m/s)^2.
3. Calculate the square of the velocity: (4.81 m/s)^2 = 23.1361 m^2/s^2.
4. Substitute the square of the velocity into the equation: 788.1 J = 0.5 * m * 23.1361 m^2/s^2.
5. Multiply both sides of the equation by 2 to eliminate the 0.5: 1576.2 J = m * 23.1361 m^2/s^2.
6. Divide both sides of the equation by 23.1361 m^2/s^2 to isolate the mass (m): m = 1576.2 J / 23.1361 m^2/s^2.
7. Perform the division to get the mass: m ≈ 68.1 kg.
For more about mass:
https://brainly.com/question/19694949
#SPJ11
Ginny is a college freshman. She is taking a course in biology, a subject she never had in high
school. When she takes notes, she desperately tries to write down every word the instructor
says. Instead she should_
the information.
Ginny is a first-year student. She never studied art history in high school, but he is now. She makes a valiant effort to record every word the instructor says when taking notes. She ought to outline or summarise instead.
Remembering a phone number as you dial it is what kind of memory is that?For instance, when we scan a phone book for a number before dialling, the number is momentarily stored in our memory for a little period of time before disappearing once the action is complete.
What is an example of a mnemonic?Because they enable us to combine several ideas into a single, simple word, they can be wonderful mnemonic tools. For energy, being able to recall the rainbow's hues.
To know more about instructor visit:-
https://brainly.com/question/30643928
#SPJ1
Which nuclear process would yield the most energy, the fission of uranium or the fission or hydrogen
The fusion of hydrogen would yield more energy than the fission of uranium.
In the fusion process, hydrogen atoms combine to form helium, releasing an enormous amount of energy in the process. This is the process that powers the sun and other stars.
On the other hand, in the fission process, heavy atomic nuclei, such as uranium or plutonium, are split into smaller nuclei, releasing energy.
While fission is used to generate electricity in nuclear power plants, the amount of energy released per reaction is lower than that of fusion.
Fusion reactions have the potential to produce far more energy than fission reactions, but currently, scientists are still working on finding a way to make fusion reactors commercially viable.
To know more about fusion & fission, refer here:
https://brainly.com/question/7720206#
#SPJ11
The blades in a blender rotate at a rate of 7000
rpm . when the motor is turned off during
operation, the blades slow to rest in 2.7 s.
The blades in the blender decelerate at a rate of approximately: 4.32 rps² when the motor is turned off during operation, taking 2.7 seconds to come to a complete stop from an initial rotational speed of 700 rpm or 11.67 rps.
To answer your question, let's first convert the given rotational speed from rpm to revolutions per second (rps) by dividing by 60, as there are 60 seconds in a minute:
700 rpm ÷ 60 = 11.67 rps
Next, we need to determine the rate at which the blades are decelerating, which is the change in rotational speed over the 2.7 seconds. Since the blades come to a stop, the final rotational speed is 0 rps. We can calculate the deceleration as follows:
Deceleration = (Final Rotational Speed - Initial Rotational Speed) ÷ Time
Deceleration = (0 rps - 11.67 rps) ÷ 2.7 s
Deceleration ≈ -4.32 rps²
This means that the blades in the blender decelerate at a rate of approximately 4.32 rps² when the motor is turned off during operation, taking 2.7 seconds to come to a complete stop from an initial rotational speed of 700 rpm or 11.67 rps.
To know more about decelerate, refer here:
https://brainly.com/question/9584042#
#SPJ11
4) You are a passenger on a spaceship. As the speed of the spaceship increases, you would observe that A) the length of your spaceship is getting shorter. B) the length of your spaceship is getting longer. C) the length of your spaceship is not changing
As a passenger on the spaceship, you would not notice any change in the length of your spaceship, even as its speed increases, because you are in the same frame of reference as the spaceship.
When you are a passenger on a spaceship, and the speed of the spaceship increases, you would observe that the length of your spaceship is not changing (Option C). This phenomenon is due to the fact that you and the spaceship are in the same frame of reference, and you both are moving together at the same speed.
However, if an external observer were watching the spaceship from a stationary point, they would observe the length of the spaceship getting shorter as its speed increases. This phenomenon is known as "length contraction" and occurs due to the theory of special relativity, proposed by Albert Einstein. Length contraction states that an object's length in the direction of motion will contract as it approaches the speed of light, but this is only observed by an external observer who is not moving with the object.
In summary, as a passenger on the spaceship, you would not notice any change in the length of your spaceship, even as its speed increases, because you are in the same frame of reference as the spaceship. The length contraction phenomenon would only be observed by an external observer who is not moving with the spaceship.
For more about spaceship:
https://brainly.com/question/14198872
#SPJ11
which of the following phrases best describes the term impedance? group of answer choices the resistance of an inductor the resistance of a capacitor the generalized expression that combines all resistances within a circuit. the internal resistance of a battery within an rlc circuit the resistance to the movement of charge carriers
When creating and analysing electronic circuits, it's critical to impedance because it has an impact on the circuit's overall performance and behaviour.
The phrase that best describes the term impedance is "the generalized expression that combines all resistances within a circuit." Impedance is a measure of the overall opposition to the flow of current in a circuit, and it takes into account both resistance and reactance (which is the resistance to the movement of charge carriers caused by the presence of capacitors and inductors).
Impedance is usually represented by the symbol Z and is measured in ohms. While the resistance of individual components like capacitors and inductors can also affect the impedance of a circuit, the term impedance is typically used to describe the overall opposition to current flow in a more general sense. It is important to understand impedance when designing and analyzing electronic circuits, as it affects the performance and behavior of the circuit as a whole.
To learn more about : circuit
https://brainly.com/question/2969220
#SPJ11
at what time of the day is the demand of electricity highest?
Answer:
morning hours
Explanation:
a gymnast does cartwheels along the floor and then launches herself into the air and executes several flips in a tuck while she is airborne. if her moment of inertia when executing the cartwheels is and her spin rate is 0.5 rev/s, how many revolutions does she do in the air if her moment of inertia in the tuck is and she has 2.0 s to do the flips in the air?
The gymnast completes 10 revolutions in the air.
The law of conservation of angular momentum states that the total angular momentum of a system remains constant if no external torques act on the system. In this case, the gymnast starts with a certain amount of angular momentum while performing the cartwheels on the ground, and this angular momentum is conserved as she launches herself into the air and performs flips.
Let I1 be the moment of inertia of the gymnast while performing the cartwheels, and omega1 be the spin rate. When she launches into the air, she changes her moment of inertia to I2 and starts rotating at a new spin rate, omega2. According to the law of conservation of angular momentum:
I1 * Ω1 = I2 * Ω2
We can rearrange this equation to solve for omega2:
Ω2 = (I1 * Ω1) / I2
Now, we can use the equation for rotational kinematics:
θ = Ω * t
where theta is the total angle rotated, omega is the spin rate, and t is the time. We can solve for the number of revolutions by converting the angle rotated into revolutions:
revolutions = θ/ (2*pi)
Plugging in the given values, we get:
Ω1 = 0.5 rev/s
I1 = (given)
I2 = (given)
t = 2.0 s
Using the conservation of angular momentum equation, we can solve for omega2:
Ω2 = (I1 * Ω1) / I2
Plugging in the values, we get:
Ω2 = (I1 * 0.5) / I2
Using the equation for rotational kinematics, we can solve for the total angle rotated in radians:
θ = Ω2 * t
Converting this angle to revolutions, we get:
revolutions = θ/ (2*pi)
Plugging in the values, we get:
revolutions = (Ω2 * t) / (2*pi) = 10 revolutions (rounded to the nearest whole number)
To know more about the Inertia, here
https://brainly.com/question/13872538
#SPJ4
what is the highest temperature allowed for cold holding fresh salsa?
The highest temperature allowed for cold holding fresh salsa is 41°F (5°C) or below.
What is the highest temperature?The U.S. Food and Drug Administration (FDA) Food Code stipulates that potentially hazardous foods, such as fresh salsa, must be stored at or below 41°F (5°C) in order to prevent the growth of harmful microorganisms.
It's important to regularly monitor the salsa's temperature and discard any that has been held over this degree for longer than four hours in order to ensure food safety.
Learn more about temperature:https://brainly.com/question/29628128
#SPJ1
A vertical spring scale can measure weights up to 215 n . the scale extends by an amount of 10.5 cm from its equilibrium position at 0 n to the 215 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.50 hz .
A fish weighing 0.045 kg is measured using a frequency of 2.50 Hz. Its weight is calculated to be 215 N using the spring constant and displacement of the scale.
Assuming the oscillations of the fish on the spring are simple harmonic, we can use the formula for the period of a simple harmonic oscillator to find the frequency of oscillation:
[tex]T = 1/f = 2\pi \sqrt{(m/k)}[/tex]
where T is the period, f is the frequency, m is the mass of the object, and k is the spring constant.
To find k, we can use Hooke's law, which states that the force exerted by a spring is proportional to the amount of stretch or compression:
F = -kx
where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.
Using the information given in the problem, we can calculate the spring constant:
k = F/x
k = (215 N) / (0.105 m)
k = 2047.6 N/m
Then, we can use the formula for the period of oscillation to find the frequency:
[tex]T = 2\pi \sqrt{(m/k)}[/tex]
[tex]2\pi \sqrt{(m/k)} = 1/f[/tex]
[tex]f = 1 / [2\pi \sqrt{(m/k)}][/tex]
[tex]f = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
f = 2.5 Hz (as given in the problem)
Therefore, we can use the frequency of 2.50 Hz to calculate the mass of the fish:
[tex]2.50 = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
m = 0.045 kg
Finally, we can use the spring constant and the displacement of the scale to find the weight of the fish:
F = kx = (2047.6 N/m)(0.105 m) = 215 N
Therefore, the weight of the fish is 215 N.
To know more about frequency refer here:
https://brainly.com/question/29739263#
#SPJ11
Mr. wang works in a recycling center. recyclable materials arrive at the center mixed together. workers use magnets to separate steel cans from other items. which two statements are true about the force between a steel can and a magnet? *
1 point
the attraction between the can and the magnet is a pull.
gravity pushes the can toward the magnet.
the force between the can and the magnet is a noncontact force.
the attraction between the can and the magnet is a push.
The two true statements about the force between a steel can and a magnet are:
1. The attraction between the can and the magnet is a pull.
2. The force between the can and the magnet is a noncontact force.
The attraction between the can and the magnet is a pull:
When a steel can is brought close to a magnet, it experiences a force of attraction. This force is referred to as a pull because it acts in the direction that brings the can closer to the magnet.
This magnetic attraction occurs due to the interaction between the magnetic fields generated by the magnet and the steel can. The presence of a magnetic field in the magnet induces a temporary magnetism in the steel can, creating an attractive force between them.
The force between the can and the magnet is a noncontact force:
In this context, a noncontact force refers to a force that can act between objects without physical contact. In the case of a steel can and a magnet, the force of attraction between them occurs without direct contact between the two objects.
The magnet generates a magnetic field that extends into the surrounding space, and the steel can experiences a force within this magnetic field.
However, there is no need for the can and the magnet to touch each other for this force to be present. This noncontact force is a result of the magnetic field interaction between the magnet and the steel can.
To learn more about magnet, refer below:
https://brainly.com/question/2841288
#SPJ11
Who discovered the comet? describe the type of telescope used? what was the first description of the comet they had found? what were they actually seeing? what did astronomers think they might see prior to the actual impacts? describe what was actually seen by astronomers. For us on earth, what lessons should we learn about this impact?
In general, comets are often discovered by amateur or professional astronomers using telescopes or other observation equipment. The type of telescope used can vary depending on the observer's preference and the specific requirements of the observation.
When a comet is first discovered, astronomers typically describe its position, brightness, and any visible features such as a tail or coma. They may also use spectroscopy to analyze the composition of the comet's gases and dust.
Astronomers may have various expectations about what they might see when a comet impacts a planet or other object. Prior to the impacts, some astronomers may have predicted a large explosion or other dramatic effects. However, the actual outcome can be difficult to predict and may depend on many factors such as the comet's size, speed, and angle of impact.
As for lessons for us on Earth, the study of comets can help us understand the history and evolution of our solar system. It can also provide insights into the formation of planets and the origins of life on Earth. Additionally, the study of impacts can help us prepare for potential hazards such as asteroid or comet impacts on Earth.
To learn more about Comet
https://brainly.com/question/12443607
#SPJ4
What is the speed of light in a medium having an
absolute index of refraction of 2.3?
About 130,346,719.13 meters per second is the speed of light in a medium having an absolute index of refraction of 2.3.
To solve this problem
The difference between the speed of light in the medium and the speed of light in a vacuum or in air is known as the refractive index of a media.
n = c / v
We are given that the absolute refractive index of the medium is 2.3. So, we can write:
n = 2.3
Thus, the speed of light in the medium is:
v = c / n = c / 2.3
The speed of light in a vacuum or in air, denoted by the symbol c, is around 299,792,458 meters per second. Therefore, by substituting this value, we obtain:
v = 299,792,458 m/s / 2.3
Simplifying this expression gives:
v = 130,346,719.13 m/s
Therefore, About 130,346,719.13 meters per second is the speed of light in a medium having an absolute index of refraction of 2.3.
Learn more about refractive index here : brainly.com/question/12469161
#SPJ1
Given that a 4 cylinder, 4 stroke engine gave the following test results:
Shaft Speed N = 2600 rev/min
Torque arm R = 16 cm
Net Brake Load F = 220 N
Fuel consumption mf = 2 g/s
Calorific Value (CV) = 42 MJ/kg
Determine the following:
(a) Brake Power;
(b) Fuel Power;
(c) Brake Thermal Efficiency.
By increasing and decreasing the brake thermal efficiency, compare the impact this has on the shaft speed or net brake load
(a) Pb = 2π * N * T
(b) Pf = mf * CV
(c) Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%
To determine the brake power, fuel power, and brake thermal efficiency, we can use the following formulas:
(a) Brake Power (Pb):
Pb = 2π * N * T
Where N is the shaft speed in revolutions per minute (rpm) and T is the torque.
(b) Fuel Power (Pf):
Pf = mf * CV
Where mf is the fuel consumption rate in kilograms per second and CV is the calorific value of the fuel in joules per kilogram.
(c) Brake Thermal Efficiency (ηb):
ηb = (Pb / Pf) * 100%
Let's calculate these values using the given information:
(a) Brake Power:
Shaft Speed N = 2600 rev/min
Torque arm R = 16 cm = 0.16 m
The torque (T) can be calculated using the formula:
T = F * R
Brake Power (Pb) = 2π * N * T
(b) Fuel Power:
Fuel consumption mf = 2 g/s = 0.002 kg/s
Calorific Value (CV) = 42 MJ/kg = 42 × [tex]10^6[/tex] J/kg
Fuel Power (Pf) = mf * CV
(c) Brake Thermal Efficiency:
Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%
Let's substitute the given values into the equations and calculate the results.
To know more about brake power refer here
https://brainly.com/question/31456389#
#SPJ11
the image below shows a photo taken with a built-in lens of a digital camera. the bottom photo is taken with the same camera, but with an additional wide-angle lens. which wave phenomenon best explains the distortion of the bottom image compared to the top? diffraction dispersion reflection polarization
The wave phenomenon that best explains the distortion of the bottom image compared to the top is distortion due to the optical effect of lens refraction.
When light passes through a lens, it undergoes refraction, causing it to bend and converge or diverge depending on the curvature of the lens surface. A wide-angle lens can cause more bending of light and wider coverage, resulting in a distorted image with a wider field of view. Diffraction is the bending of light waves around obstacles, while dispersion is the separation of light into its constituent colors. Reflection involves the bouncing of light off surfaces, and polarization is the alignment of light waves in a particular orientation.
To know more about wave phenomenon , here
brainly.com/question/15390698
#SPJ4
At t=0 a grinding wheel has an angular velocity of 21. 0 rad/s. It has a constant angular acceleration of 26. 0 rad/s2 until a circuit breaker trips at time t = 2. 10 s. From then on, it turns through an angle 438 rad as it coasts to a stop at constant angular acceleration. Through what total angle did the wheel turn between t=0 and the time it stopped?
At t=0 a grinding wheel has an angular velocity, the wheel turned through a total angle of approximately: 501.21 radians between t=0 and the time it stopped.
To find the total angle through which the wheel turned between t=0 and the time it stopped, we need to consider two parts: the angle covered during constant angular acceleration, and the angle covered while coasting to a stop.
1. During constant angular acceleration:
At t=0, the angular velocity is 21.0 rad/s, and the angular acceleration is 26.0 rad/s². The circuit breaker trips at t=2.10 s. Using the equation θ1 = ω0t + 0.5αt², we can find the angle covered during this time:
θ1 = (21.0 rad/s)(2.10 s) + 0.5(26.0 rad/s²)(2.10 s)²
θ1 ≈ 63.21 rad
2. While coasting to a stop:
After the circuit breaker trips, the wheel turns through an angle of 438 rad as it coasts to a stop at constant angular acceleration. This means θ2 = 438 rad.
To find the total angle through which the wheel turned, simply add θ1 and θ2:
Total angle = θ1 + θ2 = 63.21 rad + 438 rad ≈ 501.21 rad
Therefore, the wheel turned through a total angle of approximately 501.21 radians between t=0 and the time it stopped.
To know more about angular velocity, refer here:
https://brainly.com/question/13649539#
#SPJ11
The fact that the strength of gravity decreases with distance means the force of gravity exerted by one object on another (e.g., the earth and moon) is greater on the near side than the far side. this effect is commonly referred to as a
This effect is commonly referred to as tidal forces. Tidal forces arise due to the differences in gravitational attraction across the length of an extended object.
In the case of the Earth-Moon system, the gravitational pull of the Moon on the near side of the Earth is greater than the pull on the far side.
This results in the deformation of the Earth's oceans, creating the familiar tidal bulges.
Tidal forces can also lead to tidal locking, where an object's rotation and orbital period become synchronized, as is the case with the Moon, which always shows the same face to the Earth.
Tidal forces are also important in the study of binary star systems, where they can cause significant changes in the orbits of the stars.
To know more about tidal forces, refer here:
https://brainly.com/question/6762160#
#SPJ11
during the collision between a bug and a truck on the freeway, the truck exerts a much larger force on the bug than the one that the bug exerts on the truck. true or false
The statement "during the collision between a bug and a truck on the freeway, the truck exerts a much larger force on the bug than the one that the bug exerts on the truck" is actually false.
According to Newton's Third Law of Motion, every action has an equal and opposite reaction. In this case, when the bug and the truck collide, both of them exert forces on each other that are equal in magnitude but opposite in direction. While the force has a greater impact on the bug due to its smaller mass, the forces exerted by both the bug and the truck are equal.
Learn more about collision here:-
https://brainly.com/question/13138178
#SPJ11
A 720-kev (kinetic energy) proton enters a 0. 20-t field, in a plane perpendicular to the field. What is the radius of its path? s
The radius of the circular path of the proton is [tex]5.23 * 10^-^3 m.[/tex]
How to solve for the radius of the path[tex]KE = \frac{1}{2} mv^2[/tex]
where KE is the kinetic energy and m is the mass of the particle. Rearranging for v, we get:
[tex]v = \frac{\sqrt{2*KE} }{m}[/tex]
where m is the mass of the proton.
Substituting the values, we get:
[tex]v = \frac{\sqrt{2*720 keV * 1.60 x 10^-^1^9 J/keV} }{1.67 * 10^-^2^7 kg}[/tex]
[tex]v = 2.11 * 10^7 m/s[/tex]
Next, we can substitute the given values for the magnetic field and the charge of the proton:
B = 0.20 T
[tex]q = 1.60 * 10^-^1^9 C[/tex]
Substituting these values into the equation for the radius, we get:
[tex]r =\frac{1.67 * 10^-^2^7 kg * 2.11 * 10^7 m/s}{1.60 * 10^-^1^9 C * 0.20 T}[/tex]
[tex]r = 5.23 * 10^-^3 m[/tex]
Therefore, the radius of the circular path of the proton is[tex]5.23 * 10^-^3 m.[/tex]
Read more on radius of path here:https://brainly.com/question/16816166
#SPJ1
Under what conditions (plural) could you expect to conductors to actually conduct? When will they stop conducting
Conductors conduct electricity when there's an electric field, availability of free electrons, and they are within an appropriate temperature range. They stop conducting when these conditions are not met, such as in the absence of an electric field, insufficient free electrons, extremely high temperatures, or when they transition to a superconductor state.
Conductors are materials that allow the flow of electric current due to the movement of free electrons. They typically have low resistance to electric current flow. Some common conductors include metals such as copper, aluminum, and silver.
Conditions for conductors to actually conduct:
1. Presence of an electric field: Conductors need an electric field or potential difference to initiate the flow of electric current.
2. Availability of free electrons: Conductors must have a sufficient number of free electrons to conduct electricity.
3. Adequate temperature range: Conductors must be within a suitable temperature range, as extremely high temperatures can impact their conductivity.
Conditions when conductors will stop conducting:
1. Absence of an electric field: If there's no electric field or potential difference, the conductors won't conduct electricity.
2. Insufficient free electrons: If a conductor lacks free electrons, it cannot facilitate the flow of electric current.
3. Extremely high temperatures: At very high temperatures, the resistance of conductors may increase significantly, hindering their ability to conduct electricity.
4. Transition to a superconductor state: In some materials, when cooled down to extremely low temperatures, they exhibit zero electrical resistance and become superconductors. In this state, they no longer behave as regular conductors.
Learn more about conductors at: https://brainly.com/question/492289
#SPJ11
What does a fission reaction require to be sustainable?.
A fission reaction requires three main components to be sustainable: a sufficient amount of fissile material, a moderator to control the reaction, and a method of removing heat generated during the reaction.
1. Fissile material: To sustain a fission reaction, there needs to be a sufficient amount of fissile material, such as uranium-235 or plutonium-239. These materials have nuclei that are more likely to split when struck by a neutron, releasing energy and more neutrons in the process.
The critical mass is the minimum amount of fissile material required to maintain a self-sustained chain reaction.
2. Moderator: A moderator is a substance that slows down the neutrons released during fission. This is crucial for sustaining the reaction, as slower neutrons are more likely to be captured by fissile material and induce further fission events. Common moderators include water, heavy water, and graphite.
3. Heat removal: During a fission reaction, a large amount of heat is generated due to the release of energy. In order to maintain a sustainable reaction, it's necessary to remove this heat, typically by transferring it to a coolant, such as water or gas.
The coolant circulates through the reactor core, absorbing heat, and then transfers the heat to a heat exchanger or directly to a steam generator for power production.
In summary, a sustainable fission reaction requires a sufficient amount of fissile material to maintain a chain reaction, a moderator to control the reaction by slowing down neutrons, and an effective method of removing heat generated during the reaction.
To know more about sustainable refer here
https://brainly.com/question/29355708#
#SPJ11
A 5.0 gram piano wire spans 44.0 cm. to what tension must this wire be stretched to ensure that its fundamental mode vibrates at the d4 note (f
The piano wire must be stretched to a tension of 11.4 N to ensure that it vibrates at the D4 note.
What is linear ?Linear is a type of mathematical equation or function which has a variable that is raised to the power of one. It is also known as a straight line equation as it follows a straight line when plotted on a graph. Linear equations are used in a variety of fields such as science, engineering, business and economics. Linear equations are useful for finding solutions to problems that have a linear relationship between the variables.
The tension on the wire can be determined using the formula
T = (2π2f²L²)/(386.4),
where T is the tension, f is the frequency, and L is the length of the wire. In this case, the tension would be [tex]T = (2\pi2(293.7)2(0.44)2)/(386.4) = 11.4 N[/tex].
Therefore, the piano wire must be stretched to a tension of 11.4 N to ensure that it vibrates at the D4 note.
To learn more about linear
https://brainly.com/question/29278163
#SPJ4
A 5.0 gram piano wire spans 44.0 cm. To what tension must this wire be stretched to ensure that its fundamental mode vibrates at the D4 note (f = 293.7 Hz)?
A man pulled a food cart 4. 5 m to the right for 15 seconds. What is the average speed of the food cart to the nearest tenth of a m/s
A man pulled a food cart 4. 5 m to the right for 15 seconds. The average speed of the food cart to the nearest tenth is 0.3 m/s. The average speed of the food cart can be calculated by dividing the total distance traveled by the time taken.
In this case, the distance traveled is 4.5 m, and the time taken is 15 seconds. Thus, the average speed of the food cart can be calculated as:
average speed = total distance / time taken = 4.5 m / 15 s = 0.3 m/s
Therefore, the average speed of the food cart is 0.3 m/s.
To understand this calculation, it is important to know the definition of speed, which is the distance traveled per unit of time. In this case, the distance traveled is the horizontal distance the food cart was pulled, and the time taken is the duration of the pulling.
The average speed is the total distance traveled divided by the time taken. This calculation assumes that the speed is constant over the duration of the motion.
In summary, the average speed of the food cart is 0.3 m/s, calculated by dividing the total distance traveled (4.5 m) by the time taken (15 s).
To know more about speed refer here:
https://brainly.com/question/28060745#
#SPJ11
A small object of mass m is shot horizontally from a spring launcher that is attached to a table. All frictional forces are considered to be negligible. The ball strikes the ground a distance d from the base of the table, as shown in the figure. A second object of mass m2 is launched from the same launcher such that the spring is compressed the same distance as in the original scenario. The distance from the base of the table that the object lands is.
The distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
This is because the initial kinetic energy and spring potential energy that the objects possess is the same in both cases. The only difference between the two scenarios is the mass of the objects, which does not affect the distance traveled. This is because the time taken by the objects to travel the same distance is inversely proportional to their masses, so the total time taken by both objects to travel the same distance is the same.
This means that the distance traveled by both objects is the same, and hence the distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
Know more about kinetic energy here
https://brainly.com/question/26472013#
#SPJ11
Which statement correctly compares sound and light waves?
O Both light and sound waves need matter to carry energy from one place to another.
Neither light nor sound waves need matter to carry energy from one place to another.
O Light waves carry energy parallel to the motion of the wave, while sound waves carry energy perpendicular to it.
Sound waves carry energy parallel to the motion of the wave, while light waves carry energy perpendicular to it.
Sound waves carry energy parallel to the motion of the wave, while light waves carry energy perpendicular to it.
What is the correct comparison of light and sound?We know that light is electromagnetic wave and also we have to know that light is a transverse wave. The implication of that is that the direction of the wave motion is parallel to that of the disturbance that is causing the wave.
Light waves have higher intensity than sound waves and can cause more damage. The human eye is much more sensitive to light than the human ear is to sound.
Learn more about light waves:https://brainly.com/question/23460034
#SPJ1
Answer:
D is the answer
Sound waves carry energy parallel to the motion of the wave, while light waves carry energy perpendicular to it.
Explanation:
How much work is done on a block if a 20-N forces is applied to push the block across a frictional surface at constant speed for a displacement of 5. 0 m to the right
The work done on the block is W = (20 N)(5.0 m)(1) = 100 J.
If the block is moving at a constant speed, then the net force acting on it must be zero. The force of friction acting on the block must therefore be equal in magnitude and opposite in direction to the applied force.
Since the force of friction is opposing the motion of the block, the work done by the force of friction is negative. The work done by the applied force is positive.
The formula for work is given by W = Fd cos(theta), where W is the work done, F is the force applied, d is the displacement of the object, and theta is the angle between the force and the displacement.
In this case, the angle between the force and the displacement is 0 degrees (since the force is applied in the same direction as the displacement), so cos(theta) = 1.
Thus, the work done on the block is W = (20 N)(5.0 m)(1) = 100 J.
To know more about force of friction, refer here:
https://brainly.com/question/14662717#
#SPJ11