plz help!!

fill in the blank​

Answer:

Putting it in water, and see the displacement of the water, or just measuring its weight and devide it by the gravitational pull

Answer:  Thermal energy is the kinetic energy of particles and heat is the term used to describe how this energy may flow to other systems, such as in a radiator.

Explanation:  Molecules have a level of kinetic energy that can be measured by temperature.  Higher temperatures result in more rapid and frequent collisons of particles in motion.  Heat is the term used to measure the quantity of vibration energy in a given system.  The SI unit for heat energy is the Joule.  The water molecules in a pot of boiling water have a kinetic energy sufficient for them to break away from other water molecules and become gaseous (boiling point).  The heat energy in 1 liter of water at 95C can be calculated in terms of Joules/liter, based on the specific heat of water (e.g., in units of J/gC).  This heat can flow to other systems.  A home boiler heater unit heats water tha can be pumped around the house ehre it will flow from radiators into thje surrounding air.

Heat is the word used to explain how this energy may transfer to other systems, such as in a radiator, and thermal energy is the kinetic energy of particles.

By virtue of its temperature, a system in a condition of thermodynamic equilibrium has thermal energy or internal energy. Unlike the energy of systems that are not in a state of thermodynamic equilibrium, thermal energy cannot be transformed into meaningful work as quickly.

For instance, the same fluid or solid in a thermodynamic equilibrium state with the same energy (as thermal energy) cannot do work unless it is combined with another substance at a different temperature, as in a heat engine. However, the same fluid or solid in a moving state with the same energy (as mechanical energy) can be converted to work in some mechanical device, such as a windmill or a waterwheel.

Therefore, heat is the word used to explain how this energy may transfer to other systems, such as in a radiator, and thermal energy is the kinetic energy of particles.

Read more about thermal energy, here

https://brainly.com/question/11278589

#SPJ2

We have that The volume of real gas will change if “P” increases upto 500 atm and temperature decrease upto 0°C there will be

. Volume decreases by 0.05%

OPtion B

From the question we are told that

if “P” increases upto 500 atm

temperature decrease upto 0°C

Generally the equation for the ideal gas equation  is mathematically given as

P=\frac{nRT}{V}

Where

n=1

R=0.08

Therefore

The volume is directly proportional to temperature

Therefore

. Volume decreases by 0.05%

For more information on this visit

https://brainly.com/question/13338592?referrer=searchResults

Answer- 2.3

Explanition-

The density of hydrochloric acid is

1.49

g/mL

, and the mass is

3.5

g

. We need to use this information to find the volume of the acid. Since the above equation shows us the relationship between density, mass, and volume, we can rearrange the equation to find the volume:

Volume

=

Mass (g)

Density (g/mL)

=

3.5

g

1.49

g/mL

=

2.349

mL

The question asks for the answer to have the correct number of significant figures. Since solving this question requires division, the measurement with the least number of significant figures decides how many significant figures the final answer should have.

1.49

has three significant figures, while

3.5

has two significant figures. Therefore, the final answer for volume can have only two significant figures, which gives the final result as:

2.3

.

The density of compound is its mass divided by volume. The volume of 3.5 g hydrochloric acid with a density 1.49 g/ml is 2.34 milliliter.

Density of a substance is the measure of its mass per volume. Thus how much denser is it in a particular volume is represented by the physical quantity density.

Density of a compound is dependant on its mass, volume, temperature, bond type and pressure. The ratio of density of any object to the density of water is called specific gravity.

It is given that the mass of hydrochloric acid is 3.5 g and density is 1.49 g/ml. The volume of HCl solution can be calculated as follows:

Density = mass/volume

volume = mass/density

            = 3.5 g/1.49 g/ml

            = 2.34 ml.

Hence, the volume of HCl solution is 2.34 ml.

To find more about density, refer the link below:

https://brainly.com/question/15164682

#SPJ2

Answer:

[tex]4 - bromobenzoic \: acid \\ ↓ \\ { \tt{ \{soda \: lime \: and \: calcium \: oxide}} \\ { \tt{and \: heat \}}} \\ ↓ \\ 4 - bromobenzene \\ ↓ \\ { \tt{ \{chlorine \: and \: aluminium \: chloride \}}} \\ ↓ \\ 4 - bromo - 2 - chlorobenzene \\ ↓ \\ { \tt{ \{water \: and \: sodium \: hydroxide \}}} \\ ↓ \\ 4 - bromophenol \\ ↓ \\ { \tt{ \{conc.nitric \: acid \: at \: 60 \degree c}} \\ { \tt{and \: sulphuric \: acid \}}} \\ ↓ \\ 4 - bromo - 3 - nitrophenol[/tex]

In brackets, are the reagents

(E) Both B and C

What is chromic acid test?

Positive chromic test indicated functional groups that can be oxidized.

⇒Cyclohexanol can be oxidized to become cyclohexanone.

⇒Pentan-3-ol can be oxidized to become pentan-3-one.

Hence, both B and C will show positive chromic acid test.

A) tert-butanol although contains alcohol functional group, cannot be further oxidized as it is a tertiary alcohol.

Learn more:

brainly.com/question/18521652

The percent by mass of an element in a compound is obtained as the ratio of the mass of the atom to the relative molecular mass of the compound multiplied by 100.

If we look at the representations shown in the image, we will notice that the red ball symbolizes the oxygen atom while the blue ball symbolizes the nitrogen atom.

The percent by mass of nitrogen in NO is 46.7%. This is obtained as follows;

Molar mass = 14 + 16 = 30

percent by mass of nitrogen = 14/30 * 100 = 46.7%

NO is the diagram that has only one red and blue ball respectively.

Learn more: https://brainly.com/question/12073721

Answer:

It might be responding variable.

Answer:

mass ,volume and density

Answer:

Types of Hydrolysis

There are several types of hydrolysis, and we will look at them in brief below.

Salts: This is the most common type of hydrolysis. Hydrolysis of salts generally refers to the reaction of salt with water where it involves the interaction between cations or anions of salts and water. During hydrolysis, a salt breaks down to form ions, completely or partially depending upon the solubility factor.

Acid and Base: Acid–base-catalysed hydrolysis can be found during the hydrolysis of esters or amides. Here, the process of hydrolysis occurs when water or hydroxyl ion reacts with the carbon of the carbonyl group of the ester or amide where new compounds are formed. The products of both hydrolysis are compounds with carboxylic acid groups.

ATP: Most biochemical reactions that occur in living organisms are in the form of ATP hydrolysis which takes place with the help of enzymes acting as catalysts. The catalytic action of enzymes allows the hydrolysis or breaking down of proteins, lipids, oils, fats and carbohydrates.

Explanation:

Answer:

final pressure = 262.5kpa

Explanation:

using Gay-Lussac's Equation

P1/T1 = P2/T2

P1 = 210kpa = 210000pa

T1 = 120k

P2 = ?

T2 = 150k

210000/120 = P2/150

1750 = P2/150

P2 = 1750 X 150

P2 = 262500pa

P2 = 262.5kpa

Answer:D. AuI3

Explanation:

Answer:

B 1s2, 2s2, 2p6, 3s2, 3p6, 4s2, 3d5

Explanation:

Answer:

Aristotle disagreed with Democritus and offered his own idea of the composition of matter. According to Aristotle, everything was composed of four elements: earth, air, fire, and water. The theory of Democritus explained things better, but Aristotle was more influential, so his ideas prevailed.

pls mark me as a branlist

Answer:

The correct answer is A.

The horizontal rows on the periodic table are called periods, while the vertical columns are called groups.

Answer: 6.2cm

Explanation: because don’t forget it’s

Length • Width • Height

Answer:

be pulled into the new star

Explanation:

Because it is heavier, with more mass and more gravitational force than our little Sun.

Answer:

The right answer is option A

Answer:

The specific heat capacity affect heating rate by the amount of heat needed to raise the temperature of 1 gram of a substance 1 degree Celsius (°C).

Explanation:

In SO2 and SO3, oxygen combines with sulphur in a fixed ratio.

The law of multiple proportion states that if two elements combine with each other to form more than one chemical compound, then the various masses of the elements which combine with a fixed mass of the other element are in simple multiple ratios.

To illustrate this law, sulphur forms two oxides, SO2 and SO3. The ratio of the oxygen that combines with a fixed mass of sulphur  in the two compounds is 2:3 in accordance to the law of multiple proportion.

https://brainly.com/question/11378529

Answer:

Calcium is a metal, particularly,an alkali earth metal

Explanation:

It donates two electrons to form cation

Ca+2e––>Ca^2+

Speed is defined as the distance travelled per unit time. Mathematically, it is expressed as:

[tex]Speed = \frac{Distance }{Time}[/tex]

To solve the question given above, we'll begin by converting 23.6 miles per hour to metre per second (m/s). This can be obtained as follow:

1 mph = 0.447 m/s

Therefore,

23.6 mph = 23.6 × 0.447

23.6 mph = 10.5492 m/s

Thus, 23.6 mph is equivalent to 10.5492 m/s

Finally, we shall determine the time taken for the racer to travel 20 m. This can be obtained as follow:

Speed = 10.5492 m/s

Distance = 20 m

[tex]Speed = \frac{Distance }{Time } \\\\10.5492 = \frac{20}{Time}[/tex]

Cross multiply

10.5492 × time = 20

Divide both side by 10.5492

[tex]Time = \frac{20}{10.5492 } \\[/tex]

Therefore, it will take 1.9 s for the racer to travel a distance of 20 m.

Learn more: https://brainly.com/question/14988345

Answer:

» Water changes from colorless to a pale colored solution.

» The solubility of water reduces because a saturated solution is formed.

» The freezing point of water decreases. [colligative property]

» The boiling point of water elevates [colligative property]

» The vapour pressure of water lowers [colligative property]

Explanation:

[tex].[/tex]

Answer:

Since hydrogen has a single electron in its valence shell, it exhibits dual nature. of the periodic table, or it can obtain one electron to complete its valency of two, such as halogens from Group 17. Since it only has one electron in its outer shell, hydrogen has a dual existence.

Explanation:

This means that, like a normal halogen, a hydrogen atom can easily gain an electron to form a complete outer shell, or lose an electron to form an alkali metal. Since it already has two electrons in its outer shell, hydrogen can be diatomic, rendering it unreactive.

Answer:

i. 1 : 2

ii. NaOH is the limiting reagent

iii. 292.5g

iv. 59.69%

Explanation:

I have the detailed and self-explanatory workings. will snap and post later. Battery percent at 15%, flashlight not working.

1. The ratio of CuSO₄ to NaOH is 1 : 2

2. The limiting reactant is NaOH.

3. The mass of Cu(OH)₂ that will precipitate out is 292.5 g.

4. The percentage yield of Cu(OH)₂ is 59.7%

1. Determination of the ratio of CuSO₄ to NaOH.

CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄

From the balanced equation above, we can see that the ratio of CuSO₄ to NaOH is 1 : 2

2. Determination of the limiting reactant.

CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄

Molar mass of CuSO₄ = 63.5 + 32 + (16×4) = 159.5 g/mol

Mass of CuSO₄ from the balanced equation = 1 × 159.5 = 159.5 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mass of NaOH from the balanced equation = 2 × 40 = 80 g

From the balanced equation above,

159.5 g of CuSO₄ reacted with 80 g of NaOH.

Therefore,

638.44 g of CuSO₄ will react with = (638.44 × 80) / 159.5 = 320.22 g of NaOH.

From the calculations made above, we can see that a higher mass (i.e 320.22 g) of NaOH than what was given (i.e 240 g) is needed to react completely with 638.44 g of CuSO₄.

Therefore, NaOH is the limiting reactant.

3. Determination of the mass of Cu(OH)₂ that will precipitate out.

CuSO₄ + 2NaOH —> Cu(OH)₂ + Na₂SO₄

Molar mass of Cu(OH)₂ = 63.5 + 2(16 + 1) = 97.5 g/mol

Mass of Cu(OH)₂ from the balanced equation = 1 × 97.5 = 97.5 g

From the balanced equation above,

80 g of NaOH reacted to produce 97.5 g of Cu(OH)₂.

Therefore,

240 g of NaOH will react to produce = (240 × 97.5) / 80 = 292.5 g of Cu(OH)₂

Thus, 292.5 g of Cu(OH)₂ precipitated out of the reaction.

4. Determination of the percentage yield.

Percentage yield = (Actual /Theoretical) × 100

Percentage yield of Cu(OH)₂ = (174.6 / 292.5) × 100

Percentage yield of Cu(OH)₂ = 59.7%

Learn more about percentage yield:

https://brainly.com/question/11096315

Answer:

D. The substance that holds the organelle of a cell in place.

Explanation:

Cytoplasm is the material filled within the cell, and it holds the organelles in a cell in place.

Answer:

I think the layers of the atmosphere does temperature increase with increasing height. It is affected by convection because it heats the lower atmosphere. It is affected by conduction because the is the transfer of thermal energy. I guess

Hope this help!