The peak flow is 1 CIA. The Rational Method is used to calculate the peak discharge or peak flow rate in a catchment. This formula is commonly used in engineering and hydrology, and it's utilized for designing stormwater runoff control measures such as detention ponds, rain gardens, and storm sewers.
In this scenario, we are given that the Time of concentration of a watershed is 30 minutes, and the rainfall duration is also 30 minutes. By using the Rational Method formula, we can determine the peak flow rate. The formula is as follows:
Q = CIA, where Q is the peak flow rate, C is the runoff coefficient, I is the rainfall intensity, and A is the drainage area. Since we're given that the rainfall duration is 30 minutes, we can use the rainfall intensity equation to find out the I value. Using a rainfall intensity map, we can estimate that the rainfall intensity for a 30-minute duration is 2 inches per hour or 3.33 cm/hr. Now, we can substitute the given values into the Rational Method formula:
Q = CIA
Q = (0.4) (3.33) (A)
Q = 1.332 A
Q = 1.3A
According to the Rational Method, the peak flow rate is Q = 1.3A. Therefore, the answer is 1 CIA.
Learn more about The peak flow: https://brainly.com/question/31832454
#SPJ11
Suppose that a soft drink bottling company wanted to take a sample of the 20,000 tilled bottles that are stored tn inventory at a bottling plant. Each bottle is identified by a five-digit ID number and by a code that indicates which of the 20 types of soft drink is contained in the bottle. For the following, indicate the type of sample being employed: A sample of the first sixty bottles filled on a given day at the bottling plant. A) Simple random sampling B) Systematic random sampling C)Convenience sampling D) Quota sampling
The correct answer is option B.) Systematic random sampling.
The type of sample being employed for the first sixty bottles filled on a given day at the bottling plant is Systematic random sampling.
Systematic random sampling is a sampling method where elements are selected from an ordered sampling frame, which is a list of all the items in the population. In this case, the bottling company is using a systematic random sample by selecting every nth element from the frame of bottle numbers and drink codes. The company chooses a random starting point and then selects every 60th bottle to examine the quality of its product.
The sampling frame consists of the five-digit ID numbers assigned to each bottle and the corresponding codes indicating the type of soft drink contained in each bottle. By using this systematic random sampling method, the bottling company can obtain a representative sample of the first sixty bottles filled on a given day.
Therefore, the correct option for the type of sample being employed for the first sixty bottles filled on a given day at the bottling plant is Systematic random sampling.
Learn more about systematic random sampling:
https://brainly.com/question/31439780
#SPJ11
a) Calculate the slope factor of safety for a circular arc trial failure plane that has a 35 m radius with a center of rotation located 20 m directly above the slope’s midpoint. The slope has an inclination of 40° and a vertical height of 20 m. Soil borings indicate that a uniform clayey soil with γ = 16.5 kN/m3 and c = 45 kN/m2 ( φ = 0°) exists in the area. The weight of the failure mass is 9,900 kN per meter of length (length perpendicular to the cross-section). The horizontal distance between the center of rotation and the center of gravity of failure mass is 11 m. Use the basic method for the stability analysis. b) Is this circle the critical circle? If not, why?
The slope factor of safety is 0.0045.
If the factor of safety for this circle is the lowest among all potential failure surfaces, then it is the critical circle.
To calculate the slope factor of safety for the circular arc trial failure plane, we need to perform a stability analysis using the basic method.
The factor of safety (FS) is given by the ratio of resisting forces to driving forces. In this case, the resisting force is the shear strength of the soil, while the driving force is the weight of the failure mass.
First, let's calculate the resisting force:
Resisting Force (R) = Cohesion (c) + (Effective Stress (σ) x tan(φ))
Effective Stress (σ) = γh
Where:
γ = unit weight of soil
h = vertical height of the slope
φ = angle of internal friction
γ = 16.5 kN/m³
h = 20 m
φ = 0° (for clay)
Effective Stress (σ) = 16.5 kN/m³ x 20 m
= 330 kN/m²
Resisting Force (R) = 45 kN/m² + (330 kN/m² x tan(0°))
= 45 kN/m²
Next, let's calculate the driving force:
Driving Force (D) = Weight of the Failure Mass
Weight of the Failure Mass = 9,900 kN/m
Now, we can calculate the slope factor of safety:
FS = R / D
FS = 45 kN/m² / 9,900 kN/m
= 0.0045
b) To determine if this circle is the critical circle, we need to compare the factor of safety for this circle with the factor of safety for other potential failure surfaces in the slope. If the factor of safety for this circle is the lowest among all potential failure surfaces, then it is the critical circle.
To know more about factor visit
https://brainly.com/question/24924507
#SPJ11
For E. coli growing under glucose limitation in a steady state chemostat with endogeneous metabolism and product formation, determine the product yield coefficient (YP/S) given S0 = 10 g/L, S = 5 g/L, X = 5 g cells/L, qp = 0.3 mg P/g cells•hr, kd = 0.04 hr-1 and D = 0.2 hr-1 .
Option C is correct. S0 = 10 g/L, S = 5 g/L, X = 5 g cells/L, qp = 0.3 mg P/g cells·hr, kd = 0.04 hr-1 and D = 0.2 hr-1 F or E. coli growing under glucose limitation in a steady-state chemostat with endogenous metabolism and product formation.
The product yield coefficient (YP/S) is calculated as follows:
Product formation rate = qp.
X = 0.3mg P/g cells·hr × 5g cells/L
= 1.5 mg P/L·hr
Biomass production rate = YX/S . qp.
S = (1 / 0.2) × (0.3mg P/g cells·hr) × (5g/L)
= 0.75 g cells/L·hr
Substrate consumption rate = (F . S0 - F . S) / V
= F / V . (S0 - S)
= D . S
= 0.2/hr × 5 g/L
= 1 g/L·hr
Product Yield Coefficient (YP/S) = Product formation rate / Substrate consumption rate
YP/S = qp . X / (F . S0 - F . S)/V
YP/S = qp / DYP/S = 1.5mg P/L·hr / 0.2 hr-1
= 7.5 mg P/g of glucose consumed
The value of YP/S is 7.5 mg P/g of glucose consumed.
Learn more about chemostat
https://brainly.com/question/30532240
#SPJ11
The product yield coefficient (YP/S) for E. coli growing under glucose limitation in the given conditions is 0.167 g product/g substrate. This means that for every gram of glucose consumed, 0.167 grams of the desired product is produced.
The product yield coefficient (YP/S) is a measure of the efficiency of a microorganism in converting a substrate (S) into a desired product (P). In this case, we are considering E. coli growing under glucose limitation in a steady state chemostat with endogenous metabolism and product formation.
To determine the product yield coefficient, we need to use the following information:
S0 = 10 g/L (initial glucose concentration)
S = 5 g/L (glucose concentration in the chemostat)
X = 5 g cells/L (cell concentration in the chemostat)
qp = 0.3 mg P/g cells·hr (specific product formation rate)
kd = 0.04 hr-1 (death rate)
D = 0.2 hr-1 (dilution rate)
The product yield coefficient (YP/S) can be calculated using the equation:
YP/S = (μ - kd) / qs
Where:
μ = specific growth rate
qs = specific substrate consumption rate
To calculate μ, we can use the following equation:
μ = D + (μ - kd) / YX/S
Where:
YX/S = biomass yield coefficient (g cells/g substrate)
Now, let's calculate YX/S:
YX/S = X / S = 5 g cells/L / 5 g/L = 1 g cells/g substrate
Next, we can substitute the values into the equation for μ:
μ = D + (μ - kd) / YX/S
μ = 0.2 hr-1 + (μ - 0.04 hr-1) / 1 g cells/g substrate
Simplifying the equation, we have:
μ = 0.2 + μ - 0.04
0.04 = 0.2
μ = 0.24 hr-1
Now that we have calculated μ, we can calculate qs using the equation:
qs = μ * X = 0.24 hr-1 * 5 g cells/L = 1.2 g substrate/g cells·hr
Finally, we can calculate YP/S using the equation:
YP/S = (μ - kd) / qs
YP/S = (0.24 hr-1 - 0.04 hr-1) / 1.2 g substrate/g cells·hr
YP/S = 0.2 hr-1 / 1.2 g substrate/g cells·hr
YP/S = 0.167 g product/g substrate
Learn more about product yield coefficient
https://brainly.com/question/32050438
#SPJ11
You have found an annuity that will pay 4.75% annually and you plan to put $1,000 into the annuity each year for 12 years. To the nearest dollar, what would be the value of this annuity after 12 years?
A $18,233 B. $15,689
C.$13,456 D. $12,048
The value of the annuity after 12 years would be $18,233 to the nearest dollar.
The correct option is (A).
The value of the annuity after 12 years would be $18,233 to the nearest dollar.
Given, Interest rate (r) = 4.75%
= 0.0475
Amount to be invested each year = $1,000
Number of years (n) = 12 years
The formula to calculate the future value of the annuity is:
FV = P[((1 + r)n - 1) / r]
Where, FV = Future value of annuity
P = Amount invested each year
r = Rate of interest
n = Number of years
Substituting the given values in the above formula, we get:
FV = $1,000[([tex](1 + 0.0475)^{12[/tex] - 1) / 0.0475]
FV = $1,000[([tex]1.0475^{12[/tex] - 1) / 0.0475]
FV = $1,000[(1.697005 - 1) / 0.0475]
FV = $1,000[18.084849]
FV = $18,084.849
Rounding off the value to the nearest dollar, we get:
FV = $18,233
Therefore, the value of the annuity after 12 years would be $18,233 to the nearest dollar.
Thus, the correct option is (A).
To know more about annuity visit:
https://brainly.com/question/32931568
#SPJ11
A contract requires lease payments of $800 at the beginning of every month for 8 years. a. What is the present value of the contract if the lease rate is 3.75% compounded annually? Round to the neares
Answer: present value of the contract is approximately $68,126.
To calculate the present value of the contract, we can use the formula for the present value of an annuity.
The formula is:
PV = PMT × [(1 - (1 + r)^-n) / r]
Where:
PV = Present value
PMT = Lease payment per period
r = Interest rate per period
n = Number of periods
In this case, the lease payment per period is $800, the interest rate is 3.75% (or 0.0375 as a decimal), and the number of periods is 8 years (or 96 months since there are 12 months in a year).
Plugging these values into the formula:
PV = $800 × [(1 - (1 + 0.0375)^-96) / 0.0375]
Calculating this expression will give us the present value of the contract. Rounding to the nearest whole number:
PV ≈ $68,126
Therefore, the present value of the contract is approximately $68,126.
To Learn more about present value calculations:
https://brainly.com/question/30390056
#SPJ11
2. What is the link between compound interest, geometric sequences and growth? exponential?
Compound interest, geometric sequences, and exponential growth are linked in the sense that they all involve a growth pattern that multiplies over time.
Let's explore each concept in more detail:
Compound interest is the interest earned on both the initial principal and the accumulated interest. The interest earned is added to the principal amount, and the next interest calculation is based on this new sum. Over time, this compounding effect leads to exponential growth.
A geometric sequence is a sequence of numbers in which each term after the first is found by multiplying the previous term by a constant factor. This constant factor is called the common ratio, and it is what leads to exponential growth in the sequence.
Exponential growth refers to a growth pattern where a quantity increases at a rate proportional to its current value. In other words, the larger the quantity, the faster it grows. This leads to a curve that increases more and more steeply over time.
Compound interest and geometric sequences both exhibit exponential growth patterns due to the compounding effect and common ratio, respectively.
To know more about geometric sequences visit:
https://brainly.com/question/27852674
#SPJ11
What is the pH of a 0.11M solution of C_6OH, a weak acid (K_a=1.3×10^−10)?
The pH of a 0.11M solution of C_6OH, a weak acid is pH = 7.44. A formula for the Ka expression of a weak acid is given as follows:[A⁻] represents the concentration of the conjugate base
The given compound is C6OH which is a weak acid with a Ka of 1.3 × 10⁻¹⁰. We are to find the pH of a 0.11M solution of C6OH, a weak acid (Ka=1.3 × 10⁻¹⁰). What is a weak acid ? A weak acid is a chemical compound that loses a proton in an aqueous solution. It does not fully dissociate to form H+ ions. Instead, only a small fraction of the acid's molecules dissociate.
A formula for the Ka expression of a weak acid is given as follows:[A⁻] represents the concentration of the conjugate base. [HA] represents the concentration of the weak acid.
HA ⇌ H+ + A⁻Ka = [H+][A⁻] / [HA]. A compound with a high Ka value (large acid dissociation constant) is a strong acid, whereas a compound with a low Ka value (small acid dissociation constant) is a weak acid.
To know more about weak acid visit:
brainly.com/question/14950262
#SPJ11
The pH of a 0.11M solution of C_6OH, a weak acid is pH = 7.44. A formula for the Ka expression of a weak acid is given as follows:[A⁻] represents the concentration of the conjugate base
The given compound is C6OH which is a weak acid with a Ka of 1.3 × 10⁻¹⁰. We are to find the pH of a 0.11M solution of C6OH, a weak acid (Ka=1.3 × 10⁻¹⁰).
A weak acid is a chemical compound that loses a proton in an aqueous solution. It does not fully dissociate to form H+ ions. Instead, only a small fraction of the acid's molecules dissociate.
A formula for the Ka expression of a weak acid is given as follows:[A⁻] represents the concentration of the conjugate base. [HA] represents the concentration of the weak acid.
HA ⇌ H+ + A⁻Ka = [H+][A⁻] / [HA].
A compound with a high Ka value (large acid dissociation constant) is a strong acid, whereas a compound with a low Ka value (small acid dissociation constant) is a weak acid.
To know more about weak acid visit:
brainly.com/question/14950262
#SPJ11
(a) Show that y = Ae2x + Be-³x, where A and B are constants, is the general solution of the differential equation y""+y'-6y=0. Hence, find the solution when |y(1) = 2e² - e³ and y(0)
The specific solution to the differential equation y'' + y' - 6y = 0, given the initial conditions [tex]|y(1) = 2e^2 - e^3 and y(0)[/tex], is:[tex]y = (e^3 - e^2)e^(2x) + (3e^2 - 2e^3)e^(-3x)[/tex]
Given differential equation is [tex]y''+y'-6y = 0[/tex] To find:
General solution of the given differential equation General solution of differential equation is[tex]y = Ae^(2x) + Be^(-3x)[/tex]
The characteristic equation of differential equation isr² + r - 6 = 0Solving above quadratic equation, we getr = 2, -3
General solution of differential equation is[tex]y = Ae^(2x) + Be^(-3x) ......(i)[/tex]
Given that
[tex]y(1) = 2e² - e³[/tex]
Also,
y(0) = A + B
Substituting
x = 1
and
[tex]y = 2e² - e³[/tex]in equation (i)
A [tex]e^(2) + Be^(-3) = 2e² - e³ ......(ii)[/tex]
Again substituting
x = 0 and y = y(0) in equation (i)
A[tex]e^(0) + Be^(0) = y(0)A + B = y(0) ......(iii)[/tex]
Now, we have two equations (ii) and (iii) which are
A[tex]e^(2) + Be^(-3) = 2e² - e³A + B = y(0)[/tex]
Solving above equations, we get
[tex]A = 1/5 (7e^(3) + 3e^(2))B = 1/5 (2e^(3) - 6e^(2))[/tex]
To know more about differential visit:
https://brainly.com/question/33433874
#SPJ11
Determine the linearity (linear or non-linear), the order, homogeneity (homog enous non-homogeneous), and autonomy (autonomous or non- autonomous) of the given differential equation. Then solve it. (2ycos(x)−12cos(x))dx+6dy=0
The order of a differential equation is defined as the highest order derivative in the equation. Here, the highest order derivative is 1, so the order of the given differential equation is 1.
The given differential equation is:
(2ycos(x)−12cos(x))dx+6dy=0.
Determine the linearity (linear or non-linear):
Linear because the highest power of y and its derivatives is 1.
Determine the order:
The order of a differential equation is defined as the highest order derivative in the equation. Here, the highest order derivative is 1, so the order of the given differential equation is 1.
Determine the homogeneity (homogeneous or non-homogeneous):
A differential equation is said to be homogeneous if all the terms are of the same degree. Here, all the terms in the given equation are of degree 1 and hence it is homogeneous.
Determine the autonomy (autonomous or non-autonomous):
A differential equation is said to be autonomous if it does not depend on an independent variable. Here, there is no independent variable, so the given differential equation is autonomous.
Now, to solve the given differential equation, we need to follow the steps given below:
Step 1: Rearrange the given differential equation by moving all the y-terms to the left-hand side and the x-terms to the right-hand side.
We get: 2ycos(x) dx+6dy = 12cos(x) dx ... (1)
Step 2: Integrate both sides of the equation with respect to their respective variables. Integrate the left-hand side with respect to y and the right-hand side with respect to x.
We get: ∫2ycos(x) dx = ∫12cos(x) dx + C
where C is the constant of integration.
Integrate the left-hand side of equation (1) with respect to y and the right-hand side with respect to x.
We get: y cos(x) = 2sin(x) + C
Step 3: Rearrange the above equation to get y in terms of x.
We get: y = 2tan(x) + C'
where C' is the constant of integration obtained after rearrangement.
Step 4: Substitute the initial condition to find the value of the constant of integration. The given differential equation does not provide any initial condition.
To know more about differential equation visit:
https://brainly.com/question/33433874
#SPJ11
26. What do the alkali metals all have in common? a) They all undergo similar chemical reactions b) They all have similar physical properties c) They all form +1 ions c) all of the above n27. Which two particles have the same electronic configuration (same number of electrons)? a) Cl and F b) Cl and S c) C1¹ and Ne d) C1¹ and K.
The other options listed (a, b, and d) do not represent elements with the same number of electrons in their electronic configurations.
The alkali metals (Group 1 elements) have the following characteristics in common:
c) They all form +1 ions: Alkali metals readily lose one electron to form a +1 cation, as they have one valence electron.
a) They all undergo similar chemical reactions: Alkali metals exhibit similar chemical behavior, such as reacting vigorously with water to form hydroxides and releasing hydrogen gas.
b) They all have similar physical properties: Alkali metals share similar physical properties like softness, low density, and low melting points. They are good conductors of heat and electricity.
Regarding the second question, the pair that has the same electronic configuration (same number of electrons) is:
c) Cl and S: Both chlorine (Cl) and sulfur (S) have the electronic configuration 2,8,7, indicating the distribution of electrons in their respective energy levels.
To know more about electronic configurations,
https://brainly.com/question/28343516
#SPJ11
3. Recommend a pipeline renewal method for the following conditions and explain the rationale behind your recommendation (10 Points). a. Heavily corroded 24-in. Concrete Pipe b. 2,000 ft installation
The recommended pipeline renewal method for heavily corroded 24-in. Concrete Pipe with a 2,000 ft installation is slip lining.
Slip lining is a trenchless pipeline renewal method that involves inserting a new pipe into the existing corroded pipe. Here is the step-by-step explanation of the rationale behind this recommendation:
Assessment: Evaluate the condition of the existing concrete pipe, determining the extent of corrosion and structural damage. Consider factors such as pipe diameter, length, and accessibility.
Design: Select a new pipe with a slightly smaller diameter than the existing concrete pipe, typically a high-density polyethylene (HDPE) pipe. The new pipe should have sufficient strength and corrosion resistance.
Preparation: Clean the existing pipe thoroughly, removing any debris or obstructions that may hinder the slip lining process.
Insertion: Use specialized equipment to insert the new HDPE pipe into the existing concrete pipe. The new pipe is typically shorter in length and equipped with a pulling head to facilitate the insertion process.
Alignment and Sealing: Ensure proper alignment of the new pipe within the existing pipe and seal any gaps between them. This can be achieved by injecting grout or applying a sealant between the two pipes.
Testing and Rehabilitation: Conduct thorough testing, such as pressure testing, to ensure the integrity of the rehabilitated pipeline. If required, additional rehabilitation steps can be taken, such as internal coating or lining of the new pipe.
Slip lining offers several advantages, including reduced excavation, minimal disruption to the surrounding area, and cost-effectiveness compared to full pipe replacement. It provides a renewed and structurally sound pipeline while mitigating the issues caused by corrosion in the existing concrete pipe.
For more questions like Pipeline click the link below:
https://brainly.com/question/33517160
#SPJ11
Explain how flow rate is measured w c. The flow rate of water at 20°c with density of 998 kg/m³ and viscosity of 1.002 x 103 kg/m.s through a 60cm diameter pipe is measured with an orifice meter with a 30cm diameter opening to be 400L/s. Determine the pressure difference as indicated by the orifice meter. Take the coefficient of discharge as 0.94. [4] d. A horizontal nozzle discharges water into the atmosphere. The inlet has a bore area of 600mm² and the exit has a bore area of 200mm². Calculate the flow rate when the inlet pressure is 400 Pa. Assume the total energy loss is negligible. Q=AU=AU P [6 2 +a+2
The flow rate is 87.1 L/s.
To calculate the pressure difference as indicated by the orifice meter, the formula used is P = (0.5 x density x velocity²) x Cd x A.P
= (0.5 x density x velocity²) x Cd x AP
= (0.5 x 998 x (400/0.6)²) x 0.94 x (3.14 x (0.3/2)²)P
= 63925 Pa
The formula used to calculate the flow rate when water is discharging through a horizontal nozzle into the atmosphere is Q
= A1V1
= A2V2,
where A1 and V1 are the inlet bore area and velocity, and A2 and V2 are the exit bore area and velocity.
Q = A1V1
= A2V2P
= 400 PaA1
= 600mm²,
A2 = 200mm²
Q = (600/1,000,000) x √((2 x 400)/1000) x (600/200)
Q = 0.0871 m³/s or 87.1 L/s
Therefore, the flow rate is 87.1 L/s.
Know more about flow rate here:
https://brainly.com/question/31070366
#SPJ11
Analyse the flow, for a 10 meter (m) wide rectangular channel with a crump weir. The following estimation have been made: • The crest is 50 cm above the channel bottom. • The height of the upstream water level is 300 mm 1.1 What flow conditions will be observed in this channel? Provide support your answer.
1.2 Explain what you would use the flow measurement data for? 1.3 Use the step by step method to calculate the discharge through the crest crump weir. Do only 4 iterations. 1.4 State two other flow measuring devices or structures that can be used to measure flow. Do not mention the crest crump weir that was given in this question.
1. Since, the weir crest is 50 cm above the channel bottom, which is equivalent to 0.5 m. Also, since the height of the upstream water level is 300 mm, which is equivalent to 0.3 m. this means that the water level is below the crest of the weir, hence, there will be no flow in the channel.
2. Flow measurement data can be used to determine the flow rate of fluids such as water in open channels especially in agricultural activities that involve irrigation.
3. The discharge through the crest crump weir is -0.56 [tex]m^3/s[/tex]
4. Other flow measuring devices are Venturi meter and Ultrasonic flow meter
Observed flow condition in the channelGiven information:
The channel is rectangular and has a width of 10m. The crest of the crump weir is 50 cm above the channel bottom, and the height of the upstream water level is 300 mm.
By using the given information;
If the upstream water level is below the crest of the weir, then the flow rate is zero, hence, no flow.
Also, If the upstream water level is above the crest of the weir, then the flow rate depends on the height of the water level above the crest.
As the water level is increasing above the crest, the flow rate will also be increasing until a maximum flow rate is attained.
Once the water level exceeds the maximum height, the flow rate remains constant at the maximum value.
However, in this case, the crest of the weir is 50 cm above the channel bottom, which is equivalent to 0.5 m. The height of the upstream water level is 300 mm, which is equivalent to 0.3 m. Since the water level is below the crest of the weir, this means that there is no flow in the channel.
To calculate discharge
To calculate the discharge through the crest crump weir
Calculate the head over the weir (h) as the difference between the upstream water level and the crest height:
h = 0.3 m - 0.5 m = -0.2 m
The negative sign in this result indicates that the water level is below the crest of the weir.
Weir coefficient (C) is given as
C = 0.62 + 0.025h + 0.0013[tex]h^2[/tex]
Substitute h = -0.2 m
C = 0.62 + 0.025(-0.2) + 0.0013[tex](-0.2)^2[/tex] = 0.618
The flow rate (Q) is given as
[tex]Q = CLh^(3/2)[/tex]
where L is the width of the crest, which is equal to 10 m.
Substitute the values of C, L, and h
[tex]Q = 0.618 x 10 x (-0.2)^(3/2) = -0.56 m^3/s[/tex]
Note that the negative sign indicates that the flow is in the opposite direction to the assumed positive flow direction.
Do other iterations following the same steps used above
Learn more on flow measurement on https://brainly.com/question/1154328
#SPJ4
If the BOD₂ of a waste is 119 mg/L and BOD, is 210 mg/L. What is the BOD rate constant, k or K for this waste? (Ans: k = 0.275 d¹¹ or K = 0.119 d¹)
The rate constant (k) for this waste would be approximately -0.646 if we assume t = 1 day. It's important to note that the negative sign indicates a decreasing BOD over time.
To determine the BOD rate constant (k or K), we can use the BODₚ formula:
BODₚ = BOD₂ * e^(-k * t)
Where:
BODₚ is the ultimate BOD (BOD after an extended period of time),
BOD₂ is the initial BOD (at time t=0),
k is the BOD rate constant,
t is the time in days,
and e is Euler's number (approximately 2.71828).
Given that,
BOD₂ = 119 mg/L and
BODₚ = 210 mg/L,
we can rearrange the formula to solve for the rate constant:
k = ln(BOD₂/BODₚ) / t
Substituting the values, we have:
k = ln(119/210) / t
To find the rate constant in days (k), we need the value of t.
However, if we assume t = 1 day, we can proceed with the calculation:
k = ln(119/210) / 1
k ≈ -0.646
Therefore, the rate constant (k) for this waste would be approximately -0.646 if we assume t = 1 day. It's important to note that the negative sign indicates a decreasing BOD over time.
To more about BOD, visit:
https://brainly.com/question/28996537
#SPJ11
Please help with proof, if correct will give points
Answer:
I’ll help after i help this other person
Step-by-step explanation:
Given y₁ = x 1 1 and y2 1 x + 1 (x² - 1)y'' + 4xy' + 2y = satisfy the corresponding homogeneous equation of 1 x + 1 Use variation of parameters to find a particular solution yp = U₁Y1 + U2Y2
The particular solution to the non-homogeneous equation (x² - 1)y'' + 4xy' + 2y = (x + 1) is yp(x) = U₁(x) + U₂(x)x.
To find a particular solution using variation of parameters, we start by finding the solutions to the homogeneous equation associated with the given non-homogeneous equation. The homogeneous equation is given as (x² - 1)y'' + 4xy' + 2y = 0.
Let's solve the homogeneous equation first. We can rewrite it in the form of a second-order linear differential equation as follows: y'' + (4x/(x² - 1))y' + (2/(x² - 1))y = 0.
The characteristic equation is obtained by assuming y = e^(rx) and substituting it into the equation. Solving the characteristic equation, we find two linearly independent solutions: y₁(x) = 1 and y₂(x) = x.
Now, we can proceed with finding the particular solution yp(x) using the formula yp = U₁Y₁ + U₂Y₂, where U₁ and U₂ are functions to be determined.
We differentiate Y₁ and Y₂ to find their derivatives: Y₁' = 0 and Y₂' = 1.
Substituting these values into the non-homogeneous equation, we have: 1(x + 1)(x² - 1)U₁' + x(x + 1)(x² - 1)U₂' + 4x(x + 1)U₂ + 2U₁ = 0.
By comparing coefficients, we get the following system of equations: U₁'(x + 1)(x² - 1) + xU₂'(x + 1)(x² - 1) = 0, x(x + 1)(x² - 1)U₂ + 2U₁ = 0.
Solving this system of equations, we can find U₁(x) and U₂(x). After obtaining the values of U₁(x) and U₂(x), we can calculate yp(x) = U₁(x)Y₁(x) + U₂(x)Y₂(x).
Therefore, the particular solution is yp(x) = U₁(x) + U₂(x)x.
Learn more about particular solution
https://brainly.com/question/31252913
#SPJ11
A sterilization procedure yields a decimal reduction time of
0.65 minutes. Calculate the minimum sterilization time required to
yield 99.9% confidence of successfully sterilizing 50 L of medium
containing 10^6 contaminating organisms using this procedure.
The minimum sterilization time required to achieve a 99.9% confidence level in successfully sterilizing 50 L of medium containing 10^6 contaminating organisms is approximately 1.95 minutes.
To calculate the minimum sterilization time required to yield 99.9% confidence of successfully sterilizing 50 L of medium containing 10^6 contaminating organisms, we need to use the concept of decimal reduction time (D-value) and the number of organisms.
The D-value represents the time required to reduce the population of microorganisms by one log or 90%. In this case, the given D-value is 0.65 minutes.
To achieve a 99.9% confidence level, we need to reduce the population of microorganisms by three logs or 99.9%, which corresponds to a 10^-3 reduction.
To calculate the minimum sterilization time, we can use the following formula:
Minimum Sterilization Time = D-value × log10(N0/Nf)
Where:
D-value is the decimal reduction time (0.65 minutes).
N0 is the initial number of organisms (10^6).
Nf is the final number of organisms (10^6 × 10^-3).
Let's calculate it step by step:
Nf = N0 × 10^-3
= 10^6 × 10^-3
= 10^3
Minimum Sterilization Time = D-value × log10(N0/Nf)
= 0.65 minutes × log10(10^6/10^3)
= 0.65 minutes × log10(10^3)
= 0.65 minutes × 3
= 1.95 minutes
Therefore, the minimum sterilization time required to yield 99.9% confidence of successfully sterilizing 50 L of medium containing 10^6 contaminating organisms using this procedure is approximately 1.95 minutes
To learn more about confidence level visit : https://brainly.com/question/15712887
#SPJ11
Given that R is a complete set. Prove that the closed interval [-5, -2] ⊂ R is compact in R.
The closed interval [-5, -2] is compact in R because it is both closed and bounded.
A set is said to be compact if it is closed and bounded. In this case, the closed interval [-5, -2] is indeed closed because it contains its endpoints, -5 and -2.
To show that it is also bounded, we can see that all the numbers in the interval lie between -5 and -2, so there is a finite range of values. Therefore, the closed interval [-5, -2] satisfies both conditions of being closed and bounded, making it compact in R.
Learn more about: closed interval
brainly.com/question/33560093
#SPJ11
For the differential equation x ^2 (x ^2−9)y ′′+3xy ′+(x ^2−81)y=0, the singular points are: (0,3,−3) None of the Choices (0,−3) (0,3)
The singular points we found are (0, -3, 3), which matches the option (0, -3) and (0, 3).
The singular points of a differential equation are the values of x for which the coefficient of y'' becomes zero.
In the given differential equation [tex]x^2(x^2 - 9)y'' + 3xy' + (x^2 - 81)y = 0[/tex], we can determine the singular points by finding the values of x that make the coefficient of y'' equal to zero.
To find the singular points, we need to solve the equation [tex]x^2(x^2 - 9) = 0.[/tex]
1. Start by factoring out [tex]x^2[/tex] from the equation: [tex]x^2(x^2 - 9) = 0[/tex]
Factoring out [tex]x^2[/tex], we get: [tex]x^2(x + 3)(x - 3) = 0[/tex]
2. Set each factor equal to zero and solve for x:
[tex]x^2[/tex] = 0 --> x = 0
x + 3 = 0 --> x = -3
x - 3 = 0 --> x = 3
Therefore, the singular points of the given differential equation are (0, -3, 3).
Now, let's consider the options provided: (0, 3, -3), None of the choices, (0, -3), (0, 3).
The singular points we found are (0, -3, 3), which matches the option (0, -3) and (0, 3).
So, the correct answer is (0, -3) and (0, 3).
Learn more about singular points from this link:
https://brainly.com/question/15713473
#SPJ11
Question 8: Question Type: Perpetual Life A dam is constructed for $2,000,000. The annual maintenance cost is $15,000. In the annual compound interest rate is 5%, what is the capitalized cost of the dam, including the annual maintenance? Capitalized Cost = Purchase Price + A/I
We have to calculate the capitalized cost of the dam, including the annual maintenance, and given the purchase price and the annual maintenance cost.
Capitalized Cost = Purchase Price + A/I (where A = Annual maintenance cost and I = Annual interest rate in decimal format)Purchase price of the dam = $2,000,000Annual maintenance cost = $15,000Annual compound interest rate = 5% Solution:The first step to finding the capitalized cost is to calculate the annual interest rate in decimal format which is as follows:Annual Interest rate = 5% = 5/100 = 0.05Now, we can find the capitalized cost of the dam using the formula mentioned above:
Capitalized Cost = Purchase Price + A/I= $2,000,000 + $15,000/0.05 = $2,000,000 + $300,000 = $2,300,000
A capitalized cost is the cost of an asset, including all the necessary costs to get it up and running, which includes all costs that are expected to be incurred over the lifetime of the asset. It is a sum of purchase price and the present value of all future maintenance, operation, and replacement costs that are expected to occur throughout the life of an asset. In this question, we were asked to calculate the capitalized cost of a dam, including the annual maintenance cost. We were given the purchase price of the dam and the annual maintenance cost, along with the annual compound interest rate. To solve the question, we used the formula of the capitalized cost, which is the sum of purchase price and the annual maintenance cost divided by the annual interest rate. We first converted the annual interest rate to its decimal format, which was 5% divided by 100, and then we applied the formula to get the capitalized cost of the dam, which was $2,300,000.
To sum up, the capitalized cost of the dam is $2,300,000, which is the purchase price of the dam plus the present value of all future maintenance, operation, and replacement costs that are expected to occur throughout the life of the asset.
To learn more about capitalized cost visit:
brainly.com/question/29489546
#SPJ11
Should claims be avoided through negotiations? A)Yes B)No
In negotiations, the decision to avoid claims depends on the specific circumstances and goals of the parties involved. While it is generally preferable to reach a resolution through negotiation rather than resorting to claims, there may be situations where claims are necessary.
1. Yes, claims should be avoided through negotiations: Negotiations provide an opportunity for parties to communicate, understand each other's perspectives, and find mutually agreeable solutions. By avoiding claims and focusing on collaborative problem-solving, relationships can be preserved and strengthened. Negotiations allow for flexibility and compromise, enabling parties to reach outcomes that may not be possible through legal claims. This can lead to more sustainable and satisfactory resolutions. Engaging in negotiation rather than claims can save time, money, and resources, as the litigation process can be lengthy and costly.
2. No, claims should not always be avoided through negotiations: In some cases, negotiations may fail to resolve the underlying issues or achieve a fair outcome. Claims may then become necessary to protect one's rights and seek redress through legal means. Claims can provide a formal and structured process for resolving disputes when negotiation attempts have been exhausted or are ineffective. Claims can send a strong message that the party is serious about their position, which may encourage the other party to engage more seriously in negotiations.
Ultimately, the decision of whether to avoid claims through negotiations depends on the specific circumstances and the desired outcomes. It is important to carefully consider the advantages and disadvantages of both approaches before deciding on the best course of action.
Negotiations : https://brainly.ph/question/13665703
#SPJ11
5 pts (Rational method Time of concentration of a watershed is 30 min. If rainfall duration is 30 min, the peak flow is (just type your answer as 1 or 2 or 3 or 4 or 5): 1) CIA 2) uncertain, but it is
The peak flow that occurs in a watershed with a time of concentration of 30 min and a rainfall duration of 30 min using the Rational Method is option 2: uncertain, but it is.
How to solve problems related to the peak flow in a watershed using the Rational Method?The peak flow in a watershed can be calculated using the Rational Method, which is one of the methods for computing the peak discharge of a catchment area. Here's how you can calculate the peak flow of the watershed using the Rational Method:
The formula for the Rational Method is:
Q = CIA
Where:
Q = Peak Discharge
C = Coefficient of Runoff (dimensionless)
i = Rainfall intensity (inch/hr)
A = Drainage area (acres)
Calculation:
Given the time of concentration of the watershed = 30 min
Rainfall duration = 30 min
Using the Rational Method,
Q = CIA... (1)
We don't have the values of C and A. However, we can calculate the value of "i" using the following equation:
i = P / t... (2)
Where:
P = Rainfall depth (inches)
t = Duration of rainfall (hours)
We are given rainfall duration = 30 min or 0.5 hour
We do not have rainfall depth P. Therefore, let us assume that it rains 1 inch in 30 minutes or 0.5 hours.
So, substituting the values of t and P in equation (2)i = 1/0.5 = 2 in/hr
Now, substituting the value of i = 2 in/hr in equation (1)
Q = CIA = 2.0 x C x AA = 0.05C (as 1 acre-inch = 0.05 cfs for a duration of 1 hour)
From this, we can conclude that the peak flow that occurs in a watershed with a time of concentration of 30 min and a rainfall duration of 30 min using the Rational Method is uncertain, but it is. Therefore, the correct option is 2.
Learn more about the Rational Method: https://brainly.com/question/10161292
#SPJ11
Plane surveying is a kind of surveying in which the A) Earth is considered spherical B)Surface of earth is considered plan in the x and y directions C)Surface of earth is considered curved in the x and y directions D)Earth is considered ellipsoidal
Plane surveying is a type of surveying where the surface of the Earth is considered flat in the x and y directions (option B). This means that when conducting plane surveying, the curvature of the Earth is ignored and the measurements are made assuming a flat surface.
In plane surveying, the Earth is approximated as a plane for small areas of land. This simplifies the calculations and allows for easier measurement and mapping. It is commonly used for small-scale projects, such as construction sites, property boundaries, and topographic mapping.
However, it is important to note that plane surveying is only accurate for relatively small areas. As the size of the area being surveyed increases, the curvature of the Earth becomes more significant and needs to be taken into account. For large-scale projects, such as national mapping or global positioning systems (GPS), other types of surveying, such as geodetic surveying, are used.
In geodetic surveying, the curvature of the Earth is considered (option C). This type of surveying takes into account the Earth's ellipsoidal shape (option D) and uses more complex mathematical models to accurately measure and map large areas of land.
To summarize, plane surveying is a type of surveying where the surface of the Earth is assumed to be flat in the x and y directions (option B). It is used for small-scale projects and ignores the curvature of the Earth. For large-scale projects, geodetic surveying is used, which takes into account the Earth's curvature and ellipsoidal shape (option C and D).
To learn more about surveying
https://brainly.com/question/17365081
#SPJ11
Describe how you would prepare a sample for TGA analysis if it were provided in the form of: (i) coarse crystals (like sugar) (ii) polymer sheet
The TGA analysis is a thermoanalytical technique that determines how the mass of a sample varies with temperature.
Coarse crystals (like sugar) sample preparation for TGA analysis
When dealing with the coarse crystals (like sugar) sample, the sample is dried for 24 hours to remove any humidity and then grind it to a fine powder. The fine powder can then be transferred into a sample pan, and the sample can be analyzed using a TGA.
Polymer sheet sample preparation for TGA analysis
For the Polymer sheet sample, the sample is cut into small pieces and then placed into a sample pan. To get accurate results, it is crucial to take care not to overheat the sample or it will become brittle and then break into smaller pieces that could cause errors in the analysis. The sample is then analyzed using a TGA machine. TGA analysis is a method that determines changes in the mass of a substance as a function of temperature or time when a sample is subjected to a controlled temperature program and atmosphere. The changes in the mass are measured using a sensitive microgram balance. It is used to determine the percent weight loss of a sample over time and the thermal stability of a sample as a function of temperature.
Sample preparation for TGA analysis involves drying the sample to remove any humidity and then grinding it to a fine powder for the coarse crystals (like sugar) sample. For the Polymer sheet sample, the sample is cut into small pieces and then placed into a sample pan. The sample is then analyzed using a TGA machine.
To know more about mass, click here
https://brainly.com/question/11954533
#SPJ11
Q.Evaluate the concepts ‘peak water’, ‘grey water footprints’
and ‘virtual water’ and how
these can be used to better understand and manage the use of
water.
Peak water refers to the point at which the renewable freshwater resources in a particular region or globally reach their maximum limit and start to decline. Greywater footprints represent the amount of water required to dilute and treat wastewater before it can be safely returned to the environment. Virtual water refers to the indirect water consumption embedded in the production and trade of goods and services.
1. Peak water refers to the point at which the renewable freshwater resources in a particular region or globally reach their maximum limit and start to decline. It signifies the point where water scarcity becomes a significant concern. Understanding the concept of peak water can help us recognize the need for sustainable water management practices to ensure a continuous and sufficient water supply.
2. Grey water footprints represent the amount of water required to dilute and treat wastewater before it can be safely returned to the environment. It includes the water consumed in domestic activities such as bathing, laundry, and dishwashing. By assessing greywater footprints, we can gain insights into the impact of our daily activities on water resources. This understanding allows us to implement water conservation measures and reduce our water footprint.
3. Virtual water refers to the indirect water consumption embedded in the production and trade of goods and services. It accounts for the water used in the production process, including irrigation, manufacturing, and processing. Virtual water helps us understand the water implications of our consumption patterns and trade activities. By considering virtual water, we can make informed choices about the products we consume and support sustainable water use practices.
These concepts can be used to better manage the use of water by:
- Raising awareness: Understanding these concepts helps individuals, communities, and policymakers recognize the significance of water scarcity and the need for conservation measures.
- Water conservation: By evaluating grey water footprints, individuals can implement practices like water recycling, using water-efficient appliances, and adopting responsible water use habits.
- Sustainable agriculture: Virtual water can inform agricultural practices, encouraging farmers to adopt efficient irrigation methods and grow crops that require less water.
- Policy formulation: Governments can use these concepts to develop effective water management policies and regulations, such as water pricing, water allocation strategies, and water footprint labeling for products.
To know more about managing water: https://brainly.com/question/11845492
#SPJ11
Air containing 1.0 mol % of an oxidizable organic compound (A) is being passed through a monolithic (honeycomb) catalyst to oxidize the organic com- pound before discharging the air stream to the atmosphere. Each duct in the monolith is square, and the length of a side is 0.12 cm. Each duct is 2.0 cm long. The inlet molar flow rate of A into each duct is 0.0020 mol Ah. The gas mixture enters the catalyst at 1.1 atm total pressure and a temperature of 350 K. In order to determine a limit of catalyst performance, the conversion of A will be calculated for a situation where the reaction is controlled by external mass transfer of A from the bulk gas stream to the wall of the duct, over the whole length of the duct. Since the calculation is approximate, assume that 1. the gas flowing through the channel is in plug flow; 2. the system is isothermal; 3. the change in volume on reaction can be neglected; 4. the pressure drop through the channel can be neglected; 5. the ideal gas law is valid; 6. the rate of mass transfer of A from the bulk gas stream to the wall of the duct is given by -TA moles A area-time 4) (Cap – Ca,w) ) (length = kc time moles A х volume where kc is the mass-transfer coefficient based on concentration, CAB is the concentration of A in the bulk gas stream at any position along the length of the duct, and CA,w is the concen- tration of A at the wall at any position along the length of the duct. 1. If the reaction is controlled by mass transfer of A from the bulk gas stream to the duct wall over the whole length of the channel, what is the value of CA,w at every point on the wall of the duct? 2. For the situation described above, show that the design equation can be written as A = dx =) FAO - A 0 where A is the total area of the duct walls and xA is the fractional conversion of A in the gas leaving the duct. 3. Show that keCAOA -In(1 - A) FAO provided that kc does not depend on composition or temperature. 4. If ke = 0.25 x 10 cm/h, what is the value of xa in the stream leaving the catalyst? 5. Is the value of xa that you calculated a maximum or minimum value, i.e., will the actual conversion be higher or lower when the intrinsic reaction kinetics are taken into account? Explain your reasoning.
1.The value of CA,w at every point on the wall of the duct is not explicitly given in the provided text. It would require solving the design equation mentioned in point 2 to obtain the concentration of A at the wall.
2.The design equation can be written as A = dx =) FAO - A₀, where A is the total area of the duct walls and xA is the fractional conversion of A in the gas leaving the duct.
3.If kc (mass-transfer coefficient based on concentration) does not depend on composition or temperature, then ke * CA₀ / (CA₀ - CA,w) = ln(1 - A) / FA₀, where CA₀ is the concentration of A in the bulk gas stream at the inlet.
4.If ke = 0.25 x 10 cm/h and the value of xA is calculated from the design equation, it can be determined what fractional conversion of A will be achieved in the stream leaving the catalyst.
5.The value of xA calculated in step 4 represents a maximum limit of conversion when considering only the mass transfer limitation. The actual conversion will be lower when considering the intrinsic reaction kinetics, as additional factors come into play during the chemical reaction.
Explanation:
This implies that the conversion, A, is zero, meaning no reaction occurs under these conditions.
Given ke = 0.25 x 10 cm/h, we need to find the value of xA in the stream leaving the catalyst:
From the previous derivation, we know that the conversion, A, is zero when the reaction is controlled by mass transfer alone. Therefore, xA = 0.
The value of xA calculated above is a maximum value. When the intrinsic reaction kinetics are taken into account, the actual conversion will be lower. This is because the reaction kinetics contribute to the overall conversion, and if the intrinsic reaction rate is less than the mass transfer rate, the actual conversion will be limited by the reaction kinetics. In this case, since the conversion is zero when.
To know more about intrinsic reaction visit:
https://brainly.com/question/32799522
#SPJ11
In a triaxial shear test of a clay sample, the soil is subjected to a confınıng
pressure of 100 kPa inside the chamber. It was observed that failure of the
sample in shear occurred when the total axial stress reached 200 kPa. Estimate
the angle of internal friction.
The measure of the friction angle in degrees will be 30°.
Given that
Pressure, σ₁ = 100 kPa
Axial stress, σ₂ = 200 kPa
The difference between the stress is calculated as,
σ₃ = σ₁ + σ₂
σ₃ = 100 + 200
σ₃ = 300 kPa
The angle of the internal friction is calculated as,
σ₃ = σ₁ tan² (45° + Ф/2)
300 = 100 tan² (45° + Ф/2)
3 = tan² (45° + Ф/2)
tan² (45° + Ф/2) = 3
tan (45° + Ф/2) = √3
45° + Ф/2 = 60°
Ф/2 = 15°
Ф = 30°
The measure of the friction angle in degrees will be 30°.
More about the angle of the friction link is given below.
https://brainly.com/question/33591302
#SPJ4
Calculate the maximum shear in the third panel of a span of 8 panels at 15ft due to the loads shown in Fig. Q. 4(a).
The maximum shear in the third panel of the 8 panels span is 100 psf.
The shear force in the third panel of the 8 panels span can be calculated using the following steps;
Step 1: Calculate the total uniform load from the left support to the third panel. The load from the left support to the third panel includes the weight of the beam and any uniformly distributed load in the span.
The total uniform load from the left support to the third panel can be calculated as;
{tex}w_1 = w_b + w_u = 15 + 10 = 25 psf{tex}
The total uniform load from the left support to the third panel is 25 psf.
Step 2: Calculate the total uniform load from the third panel to the right support. The load from the third panel to the right support includes only the uniformly distributed load in the span. T
he total uniform load from the third panel to the right support can be calculated as;{tex}w_2 = w_u = 10 psf{tex}
The total uniform load from the third panel to the right support is 10 psf.
Step 3: Calculate the total shear force at the third panel. Due to the symmetrical nature of the span, the maximum shear force will occur at the third panel.
Therefore,
To know more about panels visit:
https://brainly.com/question/31649957
#SPJ11
Solve the sets of equations by Gaussian elimination: 3x^1+2x^2+4x^3 = 3 ; x^1 + x^2 + x^3 = 2 ;2x^1 x2+3x^3 = -3
By using Gaussian elimination ,the given set of equations has no solution.
To solve the set of equations using Gaussian elimination, we'll perform row operations to transform the augmented matrix into row-echelon form. Here are the steps:
Step 1: Write the augmented matrix.
The augmented matrix for the given set of equations is:
[3 2 4 | 3]
[1 1 1 | 2]
[2 0 3 | -3]
Step 2: Perform row operations to create zeros below the leading entry in the first column.
- Multiply the first row by -1/3 and add it to the second row.
- Multiply the first row by -2/3 and add it to the third row.
The updated augmented matrix is:
[ 3 2 4 | 3]
[ 0 1/3 1/3 | 1/3]
[ 0 -4/3 2/3 | -13/3]
Step 3: Perform row operations to create zeros below the leading entry in the second column.
- Multiply the second row by 4/3 and add it to the third row.
The updated augmented matrix is:
[ 3 2 4 | 3]
[ 0 1/3 1/3 | 1/3]
[ 0 0 0 | -12/3]
Step 4: Interpret the augmented matrix as a system of equations.
The system of equations is:
3x^1 + 2x^2 + 4x^3 = 3 (Equation 1)
1/3x^2 + 1/3x^3 = 1/3 (Equation 2)
0x^1 + 0x^2 + 0x^3 = -4 (Equation 3)
Step 5: Solve the simplified system of equations.
From Equation 3, we can see that 0 = -4. This implies that the system of equations is inconsistent, meaning there is no solution that satisfies all three equations simultaneously.
Therefore, the given set of equations has no solution.
Learn more about Gaussian elimination :
https://brainly.com/question/31298537
#SPJ11
prove Sec(180/4 + A/2) sec( 180/4 + A/2)= 2secA
Answer: Sec(180/4 + A/2) sec( 180/4 + A/2)= 2secA
Step-by-step explanation:
LHS = sec(π/4 +A/2)sec(π/4 - A/2)
1/cos(π/4+A/2)cos(π/4+A/2)
multiply and divide by 2
2/cos(2π/4) + cosA
we know that
2cosAcosB = cos(A+B) + cos(A-B)
2/cos(π/2) + cosA
2/0+cosA
2/cosA
2secA
So the final answer is 2secA
hence LHS = RHS