Globular clusters are usually found in the halo of a galaxy. The answer is d.
Globular clusters are dense, spherical collections of stars that orbit a galactic center. They are typically composed of tens of thousands to hundreds of thousands of stars and are some of the oldest known objects in the universe.
Globular clusters are usually found in the halo of a galaxy, which is the outermost region of a galaxy that surrounds the disk.
This is because they are thought to have formed early in the history of the galaxy, when the halo was still being formed.
In contrast, stars in the disk of a galaxy are typically younger and more spread out, with less dense collections of stars. The nucleus of a galaxy is the central region, which usually contains a supermassive black hole and dense concentrations of stars.
Therefore, the correct answer is d. halo.
To know more about Globular clusters, refer here:
https://brainly.com/question/29944733#
#SPJ11
dissolving ammonium chloride in water is an endothermic process figure 1 shows the reaction profile for this process (what do I do)
Answer:
When ammonium chloride dissolves in water, the absorption of heat occurs shows the reaction is an endothermic reaction. So, in the endothermic reaction, when the temperature increases, the value of the equilibrium constant also increases.
Explanation:
How much nitrogen is needed to form 1. 4 mol of ammonia
To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.
Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:
N₂ + 3H₂ → 2NH₃
To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:
1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.
Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Consider the following oxidation-reduction reaction: 2fe3+(aq) + 2hg(l) + 2cl−(aq) → 2fe2+(aq) + hg2cl2(s)
The balanced oxidation-reduction reaction is 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).
The given oxidation-reduction reaction is: 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).
Here is a step-by-step explanation of the reaction:
1. Identify the oxidation and reduction half-reactions:
- Oxidation: Hg(l) → Hg²⁺ + 2e⁻ (loss of electrons)
- Reduction: Fe³⁺ + e⁻ → Fe²⁺ (gain of electrons)
2. Balance the half-reactions:
- Oxidation: 2Hg(l) → Hg₂²⁺ + 4e⁻ (multiplied by 2 to balance electrons)
- Reduction: 2Fe³⁺ + 2e⁻ → 2Fe²⁺ (already balanced)
3. Add the half-reactions together:
2Fe³⁺ + 2Hg(l) + 2e⁻ → 2Fe²⁺ + Hg₂²⁺ + 4e⁻
4. Cancel the electrons on both sides:
2Fe³⁺ + 2Hg(l) → 2Fe²⁺ + Hg₂²⁺
5. Combine the remaining ions to form the final products:
2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s)
So, the balanced oxidation-reduction reaction is 2Fe³⁺(aq) + 2Hg(l) + 2Cl⁻(aq) → 2Fe²⁺(aq) + Hg₂Cl₂(s).
To know more about reduction half-reactions:
https://brainly.com/question/2034122
#SPJ11
A compound is made up of 94. 5 g of aluminum and 199. 5 g or fluorine. Determine the empirical formula of the compound.
HELPPPP
The empirical formula of a compound made up of 94.5 g of aluminum and 199.5 g of fluorine is AlF₃.
To determine the empirical formula of the compound, we need to first calculate the moles of each element present in the sample.
Moles of aluminum = 94.5 g / 26.98 g/mol = 3.50 mol
Moles of fluorine = 199.5 g / 18.99 g/mol = 10.51 mol
Next, we need to determine the smallest whole number ratio between these two values.
Dividing both values by 3.50, we get:
Moles of aluminum = 1
Moles of fluorine = 3
Therefore, the empirical formula of the compound is AlF₃.
To know more about the empirical formula refer here :
https://brainly.com/question/14425592#
#SPJ11
When read the procedures for this experiment, you find that you will need two burets. What is the purpose of the second buret?
The second buret is used for titrating a standard solution of known concentration against the analyte solution.
The second buret is typically used in titration experiments, where a standard solution of known concentration is used to determine the concentration of an unknown analyte solution. The first buret is filled with the analyte solution, and the second buret is filled with the standard solution. The standard solution is slowly added to the analyte solution until the endpoint of the reaction is reached.
The volume of the standard solution required to reach the endpoint is recorded, and the concentration of the analyte solution can be calculated using stoichiometry and the known concentration of the standard solution. The second buret is essential for accurately measuring the volume of the standard solution added to the analyte solution and ensuring accurate results.
To learn more about analyte solution, here
https://brainly.com/question/31182268
#SPJ4
The heating was stopped before all of the liquid can evaporate how will this affect the results of the experiment
The heating process is often used in experiments to evaporate liquid and concentrate the sample. If the heating was stopped before all of the liquid could evaporate, this would have a significant impact on the results of the experiment.
Firstly, the concentration of the sample would be lower than expected. This could affect the accuracy and precision of any measurements or analyses performed on the sample.
For example, if the sample was being analyzed for the presence of a certain compound, the lower concentration may make it more difficult to detect or quantify the compound accurately.
Additionally, the incomplete evaporation of the liquid could lead to contamination of the sample. If the liquid is not fully evaporated, there may be impurities or other compounds present in the final sample that were not accounted for in the experimental design. This could affect the validity of the results and the interpretation of the data.
In summary, the premature stopping of heating in an experiment could lead to lower sample concentration and potential contamination, both of which could have significant implications for the results and conclusions drawn from the experiment.
To know more about heating process, visit:
https://brainly.com/question/10219607#
#SPJ11
Given the following equilibrium reaction, Ag2CO3(s) ⇆ 2Ag(aq) + CO3-2(g), what will happen to the concentration of Ag2CO3(s) (increase, decrease, remain the same), if NaCl(aq) is added
The addition of NaCl(aq) will not affect the concentration of Ag₂CO₃(s) because it is a solid and its concentration remains constant.
The addition of NaCl(aq) will introduce Cl⁻ ions into the solution, which can react with Ag+ ions to form the sparingly soluble salt AgCl(s):
Ag⁺(aq) + Cl⁻(aq) ⇆ AgCl(s)
This reaction will shift the equilibrium of the original reaction to the right, according to Le Chatelier's principle, in order to counteract the increase in Ag⁺ ions. As a result, more Ag⁺ ions will be produced from the dissociation of Ag₂CO₃(s), causing its concentration to remain constant, and more CO₃⁻²(g) ions will be consumed, decreasing their concentration. Therefore, the concentration of Ag⁺(aq) will increase, while the concentration of CO₃⁻²(g) will decrease.
To learn more about concentration follow the link:
brainly.com/question/10725862
#SPJ4
ENDOTHERMIC
During this chemical reaction energy is absorbed. In the chemistry lab, this would be indicated by a decrease in temperature or if the reaction took place in a test tube, the test tube would feel colder to the touch. Reactions like this one absorb energy because
The reactants have less potential energy than the products
In chemistry, a chemical reaction can be classified as either endothermic or exothermic based on whether the reaction releases or absorbs energy, respectively. An endothermic reaction is one in which energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system.
The term potential energy refers to the stored energy within a system due to the position or configuration of the particles that make up that system. In the case of a chemical reaction, potential energy is stored within the chemical bonds between atoms and molecules.
In an endothermic reaction, the reactants have less potential energy than the products. This is because energy is required to break the chemical bonds in the reactants, which absorbs energy from the surroundings. As a result, the products have higher potential energy than the reactants because they have absorbed energy from the surroundings during the reaction.
Examples of endothermic reactions include the process of melting ice, where energy is absorbed from the surroundings to break the bonds between water molecules, and the reaction between baking soda and vinegar, where energy is absorbed to break the bonds between the molecules of the reactants.
In summary, endothermic reactions are those that require energy to be absorbed from the surroundings. This results in the products of the reaction having more potential energy than the reactants, which have had their bonds broken and therefore have less potential energy.
To know more about endothermic refer here
https://brainly.com/question/23184814#
#SPJ11
If 3grams of sodium reacts with 25 grams of sulfuric acid to form sodium sulfate and 1 gram of hydrogen and no sodium is left after the reaction but 9grams of acid remained unreacted how many grams of sodium sulfate were formed
The balanced chemical equation for the reaction between sodium and sulfuric acid to form sodium sulfate and hydrogen gas is:
2Na + H2SO4 -> Na2SO4 + 2H2
From the given information, we can see that the reaction is limited by the amount of sodium available, since all of the sodium is used up in the reaction.
Therefore, we can use the amount of sodium to determine the amount of sulfuric acid that reacted and the amount of sodium sulfate that was formed.
1. Calculate the amount of sulfuric acid that reacted:
m(Sulfuric acid) = 25 g - 9 g = 16 g
n(Sulfuric acid) = m(Sulfuric acid) / M(Sulfuric acid) = 16 g / 98.08 g/mol = 0.163 mol
2. Calculate the amount of sodium sulfate formed:
Since the mole ratio of Na to Na2SO4 is 2:1, the number of moles of sodium used is:
n(Na) = m(Na) / M(Na) = 3 g / 22.99 g/mol = 0.1305 mol
The amount of sodium sulfate formed is also 0.1305 mol, since the mole ratio of Na to Na2SO4 is 2:1.
m(Na2SO4) = n(Na2SO4) x M(Na2SO4) = 0.1305 mol x 142.04 g/mol = 18.54 g
Therefore, 18.54 grams of sodium sulfate were formed in the reaction.
To know more about hydrogen refer here
https://brainly.com/question/31018544#
#SPJ11
A sample of hydrogen at 47°C exerts a pressure of 106 kPa. The gas is heated to 77°C
at constant volume. What will its new pressure be? What law will you use?
Answer:
We can use Gay-Lussac's Law to solve this problem, which states that the pressure of a gas is directly proportional to its temperature, provided the volume and the number of moles of the gas are constant.
Using this law, we can write:
P1/T1 = P2/T2
where P1 is the initial pressure, T1 is the initial temperature, P2 is the final pressure, and T2 is the final temperature.
Substituting the given values, we get:
P1 = 106 kPa
T1 = 47°C + 273.15 = 320.15 K
T2 = 77°C + 273.15 = 350.15 K
So, P2/T2 = P1/T1
P2 = P1 × (T2 / T1)
P2 = 106 kPa × (350.15 K / 320.15 K) = 115.44 kPa
Therefore, the new pressure of the hydrogen gas will be 115.44 kPa when it is heated to 77°C at constant volume.
please vote brainliest, have a great day :)
If a solution is 3 h2o2 by mass calculate its molarity.
The molarity of the 3% H2O2 solution is 0.0882 M.
To calculate the molarity of a solution, we need to know the moles of the solute (in this case, H2O2) and the volume of the solution.
First, we need to convert the percentage by mass to grams of H2O2:
If the solution is 3% H2O2 by mass, that means there are 3 grams of H2O2 in 100 grams of solution.
So for a certain mass of solution, we can calculate the mass of H2O2 using this proportion:
mass H2O2 / mass solution = 3 g H2O2 / 100 g solution
We can simplify this by assuming a mass of 100 g solution, which gives us:
mass H2O2 = 3 g H2O2 / 100 g solution * 100 g solution = 3 g H2O2
Now we can calculate the moles of H2O2:
The molar mass of H2O2 is 34.01 g/mol.
So the number of moles of H2O2 in 3 grams is:
moles H2O2 = 3 g H2O2 / 34.01 g/mol = 0.0882 mol H2O2
Assuming a volume of 1 liter of solution (which is the standard volume for molarity), we can calculate the molarity of the solution:
Molarity = moles of solute / volume of solution in liters
Molarity = 0.0882 mol / 1 L = 0.0882 M
Therefore, the molarity of the 3% H2O2 solution is 0.0882 M.
To know more about molarity refer to-
https://brainly.com/question/8732513
#SPJ11
YALL HELP ASAP
1) If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people?
2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?
WHATS THE ANSWER TO THESE PLS HELPME
1) The reason why other big molecules, such as complex carbohydrates, don't usually come out in the feces of healthy people is because they are broken down into smaller, absorbable units during the digestive process.
If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people:
Complex carbohydrates are broken down into simple sugars like glucose through the action of enzymes such as amylase, which is present in saliva and pancreatic secretions. These simple sugars can then be absorbed by the small intestine and used by the body for energy. In contrast, fiber cannot be broken down by human digestive enzymes, so it remains undigested and is eliminated in the feces.
2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?
As food travels through the digestive system, complex carbohydrates are gradually broken down into smaller, absorbable units. This process begins in the mouth with the action of salivary amylase, which starts breaking down the complex carbohydrates into smaller units. As the food continues to the stomach and then to the small intestine, more enzymes, like pancreatic amylase, are secreted to further break down the complex carbohydrates into simple sugars. These simple sugars are then absorbed by the small intestine and enter the bloodstream, where they can be used for energy or stored for later use. This is why the amount of complex carbohydrates decreases as food travels through the digestive system.
To know more about digestive system:
https://brainly.com/question/29694477
#SPJ11
In this last step, return to Step 10 in your Lab Guide to calculate the error between your calculated specific heat of
each metal and the known values in Table C. Follow the directions given in your Lab Guide, using this formula:
(calculated metal - known (metal)
Error = 100
known Cmetal
To calculate the error between your calculated specific heat of each metal and the known values in Table C, you should use the following formula: Error = ((calculated specific heat of metal - known specific heat of metal) / known specific heat of metal) * 100.
In the last step of the lab, you need to calculate the error between your calculated specific heat of each metal and the known values in Table C. To do this, you will return to Step 10 in your Lab Guide and follow the directions provided. The formula you will use is:
Error = (calculated metal - known metal) / (known Cmetal) x 100
This formula will give you the percentage error between your calculated values and the known values in Table C. To calculate the error for each metal, simply plug in the values for the specific heat you calculated and the known value for that metal from Table C. Make sure to follow the directions carefully in your Lab Guide to ensure accurate calculations.
Learn more about specific heat at https://brainly.com/question/30403247
#SPJ11
One isotope of element J has an atomic mass of 78. 92u and a relative abundance of 50. 69%. The other major isotope of element J has an atomic mass of 80. 92u and a relative abundance of 49. 31%. Calculate the average atomic mass element J
The average atomic mass of element J is 79.854u as it determines the properties and behavior of the element in various chemical and physical processes.
To calculate the average atomic mass of element J, we need to use the formula:
Average atomic mass = (mass₁ × % abundance₁ + mass₂ x % abundance₂) ÷ 100
where mass₁ and mass₂ are the atomic masses of the two isotopes and % abundance₁ and % abundance₂ are their respective relative abundances.
Substituting the values given in the problem, we get:
Average atomic mass of J = (78.92u x 50.69% + 80.92u x 49.31%) ÷ 100
= (40.05148u + 39.80252u) ÷ 100
= 79.854u
To learn more about atomic follow the link:
brainly.com/question/5661976
#SPJ4
CH3COOC5H11 Draw this structure it is an ester
CH₃COOC₅H₁₁ is the chemical formula for an ester. The structure of CH₃COOC₅H₁₁ is attached.
Esters are organic compounds that are formed from a reaction between a carboxylic acid and an alcohol. The ester formed from the reaction between acetic acid (CH₃COOH) and pentanol (C₅H₁₁OH) is CH₃COOC₅H₁₁.
The ester has a carbonyl group, which is a carbon atom double-bonded to an oxygen atom, that is located in the middle of the molecule. The carbonyl group is attached to an acetyl group (CH₃CO), which is a combination of a methyl group (CH₃) and a carbonyl group. The other end of the molecule is attached to a pentyl group (C₅H₁₁), which is a chain of five carbon atoms with eleven hydrogen atoms attached.
Esters are commonly used as fragrances and flavorings, and can be found in a variety of fruits and flowers. They also have many industrial applications, such as in the production of plastics, resins, and solvents.
To know more about ester here
https://brainly.com/question/31827356
#SPJ1
Why is lead (Pb) able to react with different elements ?
Lead (Pb) is able to react with different elements because it has a relatively low ionization energy, which means that it requires less energy to remove an electron from a lead atom compared to other elements.
Why does lead have low ionization energy?Low ionization energy makes it more likely for lead to form compounds with other elements by giving up electrons or sharing them in covalent bonds. Additionally, lead has a relatively high atomic mass, which makes it more likely to form ionic compounds with lighter elements that have lower atomic masses.
The ability of lead to react with different elements also depends on the specific conditions under which the reaction occurs, such as temperature, pressure, and the presence of other reactants or catalysts.
Find out more on lead here: https://brainly.com/question/18110420
#SPJ1
How is entropy related to the spontaneity of a reaction?
O A. AS<0 contributes to spontaneity.
O B. AS does not affect spontaneity.
C. AS = 0 contributes to spontaneity.
D. AS> O contributes to spontaneity.
ΔS> O contributes to spontaneity. This is the relationship between entropy and spontaneity. Therefore, the correct option is option D.
Entropy is a measureable physical characteristic and a scientific notion that is frequently connected to a condition of disorder, unpredictability, or uncertainty. From classical thermodynamics, where it was originally recognised, through the microscopic description of nature in statistical physics, to the fundamentals of information theory, the phrase and concept are employed in a variety of disciplines. It has numerous applications in physics and chemistry, biological systems and how they relate to life, cosmology, economics, sociology, weather science, and information systems, especially the exchange of information. ΔS> O contributes to spontaneity.
Therefore, the correct option is option D.
To know more about entropy, here:
https://brainly.com/question/20166134
#SPJ12
A 30g piece of metal absorbs 1,200 joules of heat energy, and its
temperature changes from 25°C to 175°C. Calculate the specific capacity of
the metal. What is the likely metal?
Answer:
Niobium (Columbium)
Explanation:
Specific heat capacity has the units J/(kg °C). To find the heat capacity, all we need to do is organize the values so the units match up.
1200 J / (0.03 kg * 150°C) = 266.67 or 267 J/(kg °C)
The closest metal to a 267 heat capacity is Niobium I believe.
What is the coefficient in front of Cl₂, when this equation is balanced?
Zn +_Cl₂ → ZnCl₂
The coefficient in front of Cl₂ is 1, wen the equation is balanced
How to find the coefficientThe balanced chemical equation for the reaction between Zinc and Chlorine gas is:
Zn + Cl₂ → ZnCl₂
To balance this equation, we need to make sure that the number of atoms of each element is equal on both the reactant and product side of the equation.
In this case, there is one Zinc atom and two Chlorine atoms on the reactant side, and one Zinc atom and two Chlorine atoms on the product side. So, the equation is already balanced.
Learn more about balanced equation at:
https://brainly.com/question/11904811
#SPJ1
How many grams of CaCl2 would be required to produce a. 750 M solution with a 855 ml volume?
8.32 grams of CaCl2 are required to produce 750 ml of a 0.100 M CaCl2 solution.
The number of moles of solute that can dissolve in 1 L of a solution is known as molarity or molar concentration.
Volume of solution (in litres) / Number of solutes (in moles), or
C = n / V
According to the question,
V = 750 ml and C = 0.100 M
Let's convert millilitres to litres for this.
We know 1 L = 1000 ml
Consequently, 750 ml equals (750/1000) L, or 0.75 L.
So, V = 0.75 L
We know that C = n / V
So, n = C x V
n = 0.100 x 0.75 = 0.075
The solute contains n moles in total.
CaCl2 thus has a mole count of 0.075 moles.
In 750 ml of solution, this demonstrates that there are 0.075 moles of CaCl2.
We must know the molar mass of CaCl2 in order to calculate the mass of CaCl2 in grams.
To do this, we must use the periodic table to determine the atomic masses of each atom.
CaCl2 consists of 1 Ca and 2 Cl atoms.
Atomic mass of Ca is 40.08 g and that of Cl is 35.45, so 2 x 35.45 = 70.90 g.
We obtain the mass of CaCl2 in grams by averaging these measurements.
Hence, mass of CaCl2 = 40.08 + 70.90 = 110.98 g
Thus, 110.98 g equals 1 mole of CaCl2.
Therefore, 0.075 moles of CaCl2 will weigh 8.3235 g, which is rounded to 8.32 g, or 0.075 x 110.98 g.
To know about volume
https://brainly.com/question/14710169
#SPJ4
The complete question is
How many grams of calcium chloride will be needed to make 750 mL of a 0.100 M CaCl2 solution?
6-) While stirring a beaker of water, a student adds sodium chloride until no more sodium chloride will dissolve. Which of these is most likely to reduce the concentration of the sodium chloride in solution? A heating the solution on a hot plate B. Adding more sodium chloride to solution C. Removing some solution with a pipette D. Using an ice bath to cool the solution
Using an ice bath to cool the solution is most likely to reduce the concentration of sodium chloride in the solution. Option D is correct.
When a solution is cooled, the solubility of most solids decreases. As a result, some of the sodium chloride may precipitate out of the solution, reducing the concentration of the solute. The other options listed would not reduce the concentration of sodium chloride in the solution.
Heating the solution on a hot plate could potentially increase the solubility of sodium chloride and lead to more dissolving, whereas adding more sodium chloride would only increase the concentration. Removing some solution with a pipette would not change the concentration, as the amount of solute would remain the same in the remaining solution. Hence Option D is correct.
To learn more about concentrations, here
https://brainly.com/question/10725862
#SPJ4
where is ΔH the equation
2 NaCl --> 2 Na + Cl2
ΔH = -411 kJ/mol. Write the balanced equation for the reaction, being sure to include energy as a reactant or product.
The complete reaction would be; 2 NaCl --> 2 Na + Cl2 + H
What is the position of the energy in the reaction?Energy is released when an exothermic process continues in the form of heat, light, or sound. In this way, the reactants' chemical bonds initially hold the energy, which is later released as the bonds are broken and new ones are formed.
Heat or other forms of energy are released as a result of the energy differential between the reactants and the reaction's products. In an exothermic process, energy is assumed to be on the side of the products.
Learn more about energy:https://brainly.com/question/26219779
#SPJ1
Silo measure d 640 grams of sulphur which occupies 540ml of container at 47 degree celsius.find the pressure of the gas.
The pressure of the gas is 76.8 atm.
The pressure of the gas can be calculated using the ideal gas law formula:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to calculate the number of moles of sulfur:
molar mass of sulfur = 32 g/mol
number of moles = mass/molar mass
= 640 g/32 g/mol
= 20 mol
Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:
V = 540 ml = 0.54 L
T = 47°C + 273.15 = 320.15 K
Finally, we can plug in the values and solve for pressure
P = nRT/V
= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L
= 76.8 atm
To know more about ideal gas law, refer here:
https://brainly.com/question/28257995#
#SPJ11
2C6H6(g) + 150₂(g) → 12CO₂(g) + 6H₂O(g)
What volume of water vapor, in liters,
forms at STP when 1 L of C6H6 reacts
with oxygen?
[?] LH₂O
Volume (L) H₂O
Enter
Answer:
3 L
Explanation:
You want to know the volume of water vapor produced at STP when 1 L of C₆H₆ reacts with oxygen.
ReactantsThe given balanced reaction equation tells us that 6 moles of water vapor are produced from each 2 moles of C₆H₆. At STP, the volume of water vapor will be 3 times the volume of C₆H₆.
3 liters of water vapor are produced by reacting 1 liter of C₆H₆ with oxygen.
One rainy day, a car with a mass of 1 250 kg moving at 20. 0 m/s hits the rear end of another car with a mass
of 1 610 kg moving at 8. 0 m/s in the same direction. What is the final velocity of the two cars if they stick
together? What is the change in kinetic energy of the system? What type of collision occurred in the system?â
The final velocity of two cars that stick together after a collision is 18.5 m/s. The change in kinetic energy of the system is 322,505 J, and an inelastic collision occurred.
To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a closed system remains constant if no external forces act on it.
First, we calculate the initial momentum of the system:
p_initial = m1 * v1 + m2 * v2
p_initial = 1250 kg * 20.0 m/s + 1610 kg * 8.0 m/s
p_initial = 40,000 kg m/s + 12,880 kg m/s
p_initial = 52,880 kg m/s
Next, we calculate the total mass of the system after the collision:
m_total = m1 + m2
m_total = 1250 kg + 1610 kg
m_total = 2860 kg
Since the two cars stick together after the collision, we can assume that they move as one object. Therefore, the final velocity of the two cars can be calculated as follows:
v_final = p_initial / m_total
v_final = 52,880 kg m/s / 2860 kg
v_final = 18.5 m/s
To calculate the change in kinetic energy of the system, we can use the formula:
ΔK = K_final - K_initial
The initial kinetic energy of the system can be calculated as:
K_initial = 1/2 * m1 * v1² + 1/2 * m2 * v2²
K_initial = 1/2 * 1250 kg * (20.0 m/s)² + 1/2 * 1610 kg * (8.0 m/s)²
K_initial = 400,000 J + 51,520 J
K_initial = 451,520 J
The final kinetic energy of the system can be calculated as:
K_final = 1/2 * m_total * v_final²
K_final = 1/2 * 2860 kg * (18.5 m/s)²
K_final = 774,025 J
Therefore, the change in kinetic energy of the system is:
ΔK = K_final - K_initial
ΔK = 774,025 J - 451,520 J
ΔK = 322,505 J
Since the total kinetic energy of the system is not conserved, and some of it is converted to other forms of energy such as heat and sound, we can conclude that an inelastic collision occurred in the system.
To know more about the kinetic energy refer here :
https://brainly.com/question/26472013#
#SPJ11
A 0. 0600 M solution of an organic acid has an [H+] of 1. 75×10-3 M
The pH value of the mentioned solution is calculate out being 2.76. The percent ionization of the acid is calculate being nearly 3.8%. And the Ka value of the acid is found out to be 1.75×10⁻³.
In the way to get pH of the solution, we ar needed to utilize the formula:
pH = -log[H⁺]
here, [H⁺] is defined as the concentration of the hydrogen ion in moles per liter (M).
As per given [H⁺] = 1.75×10⁻³ M, we have:
pH = -log(1.75×10⁻³) = 2.76
Therefore, the pH of the mentioned solution is found out being 2.76.
In order to calculate the percent ionization of the acid, we can utilize the formula: % ionization = [H⁺] / [HA] × 100%
( [HA] is the initial concentration of the acid in moles per liter (M))
The [HA] can be calculated using the information that the solution is 0.0460 M, so:
[HA] = 0.0460 M
% ionization = [H⁺] / [HA] × 100% = (1.75×10⁻³ / 0.0460) × 100% ≈ 3.8%
Therefore, the percent ionization of the acid is calculate being nearly 3.8%.
To get the Ka value of the acid, we can use the expression:
Ka = [H⁺]² / [A⁻]
Here, [A⁻] is the concentration of the conjugate base of the acid in moles every liter (M).
The presented acid is a weak acid, so it dissociates according to the equation:
HA ⇌ H⁺ + A⁻
From this equation above , we can find and get that the initial concentration of the conjugate base [A⁻] calculated being almost equal to the concentration of the hydrogen ion [H⁺] because the acid is only slightly ionized. Therefore, we have: [A⁻] = [H⁺] = 1.75×10⁻³ M
putting it in this in order to find Ka, we will get:
Ka = [H⁺]² / [A⁻] = (1.75×10⁻³)² / (1.75×10⁻³) = 1.75×10⁻³. Hence, the Ka value of the acid is calculated being 1.75×10⁻³.
Learn more about Ionization :
https://brainly.com/question/1602374
The complete question is :
A 0.0460 M solution of an organic acid has an [H⁺] of 1.75×10⁻³ M . Using the values above, calculate the pH of the solution. What is the percent ionization of the acid? Calculate the Ka value of the acid.
There are no attractive or repulsive forces between gas molecules. How does that affect the motion of gas particles?
The absence of attractive or repulsive forces between gas molecules means that they are free to move independently and randomly. This results in the motion of gas particles being characterized by constant collisions and changes in direction and speed. Without any forces to constrain their movement, gas particles will continue to move until they collide with other particles or the walls of their container. This is what causes gases to fill up any container they are in, as their independent motion allows them to spread out evenly throughout the available space.
What is attractive force?
An attractive force is a force that pulls or draws two or more objects or particles towards each other. It is the opposite of a repulsive force, which pushes objects or particles away from each other.
Attractive forces can be observed in a variety of contexts, including gravity, electromagnetism, and intermolecular forces in chemistry. For example, the force of gravity between two objects is an attractive force that pulls them together, while the electromagnetic force between opposite charges is also an attractive force.
What is repulsive force?
A repulsive force is a force that pushes two or more objects or particles away from each other. It is the opposite of an attractive force, which pulls objects or particles towards each other.
Repulsive forces can be observed in a variety of contexts, including electromagnetism and intermolecular forces in chemistry. For example, the force between two like charges is repulsive, while the force between two like magnetic poles is also repulsive.
To know more about Gas molecules:
https://brainly.com/question/30597086
#SPJ11
Calculate the percent ionization of a 0. 593 m solution of acetylsalicylic acid (aspirin), hc9h7o4. % ionization
The percent ionization of a 0.593 M acetylsalicylic acid solution is 1.85%.
What is percent ionization?
Percent ionization measures how much a weak acid or base ionizes in solution. It is represented as a percentage of the concentration of the ionized form of the acid or base to the starting concentration of the acid or base.
The acid dissociation constant, Ka, is used to compute the percentage of ionization of a weak acid such as acetylsalicylic acid (aspirin). Acetylsalicylic acid's Ka expression is:
Ka = [H+][[tex]C_{9}H_{7}O_{4}[/tex]-]/[[tex]HC_{9}H_{7} O_{4}[/tex]]
[H+] = concentration of hydrogen ions
[[tex]C_{9} H_{7} O_{4}[/tex]-] = concentration of the conjugate base,
[[tex]HC_{9} H_{7} O_{4}[/tex]] = concentration of the acid.
Given the molarity of the solution, we must first calculate the acid concentration, which is:
[[tex]HC_{9} H_{7} O_{4}[/tex]] = 0.593 M
The next step is to suppose that the acid's % ionization is low, which means that the acid's dissociation concentration is minimal in comparison to the acid's original concentration. This presumption lets us assume that the concentration of [[tex]HC_{9} H_{7} O_{4}[/tex]] in the denominator is equivalent to the acid's original concentration.
Therefore, the Ka expression can be rewritten as follows:
Ka = [H+][[tex]C_{9} H_{7} O_{4}[/tex]-]/0.593 M
The concentration of the dissociated acid is equal to the concentration of the conjugate base at equilibrium, i.e., [[tex]C_{9} H{7} O_{4}[/tex]-] = [H+]. This is another fact we are aware of.
With this in the Ka expression and the [H+] equation solved, the following result is obtained:
[tex][H+]^{2}[/tex] = Ka x 0.593 M
[H+] = [tex]\sqrt{(Ka X 0.593 M)}[/tex]
Using the Ka value for acetylsalicylic acid (Ka = 3.3 x [tex]10^{-4}[/tex]) and substituting, we get:
[H+] = [tex]\sqrt{(3.3 X 10^{-4} X 0.593) }[/tex]
= 0.011 M
Therefore, the percent ionization of acetylsalicylic acid is:
% ionization = ([H+] / [[tex]HC_{9} H_{7} O_{4}[/tex]]) x 100
= (0.011 M / 0.593 M) x 100
= 1.85%
Therefore, 1.85% of an acetylsalicylic acid solution with a concentration of 0.593 M is ionized. This indicates that, at equilibrium, just a small proportion of the acid molecules have split into ions.
Learn more about percent ionization from the given link.
https://brainly.com/question/18915082
#SPJ4
How many grams of calcium chloride should be dissolved in 500. 0mL of water to make a 0. 20m solution of calcium chloride?
11.1 grams of calcium chloride should be dissolved in 500. 0mL of water to make a 0. 20 M solution of calcium chloride.
Molarity of a solution is defined as the number of moles of solute present in 1 litre of a solution. 1 mole of any substance is equal to 6.022× 10²³ atoms, ions or molecules present in it.
0.2M means 0.2mol CaCl₂/1L solution.
This question didn't give us a density of the solution so needs an assumption that the solution has equal volume to water.
x mol/0.5L=0.2M
x = 0.1
0.1 mol of CaCl₂ is needed. Ca=40g/mol, Cl=35.5g/mol.
CaCl₂ 0.1mol = (40+35.5×2)×0.1=11.1g
To know more about calcium chloride here
https://brainly.com/question/31427795
#SPJ4
Which part of the decay will take the most time?
the decay of U-238 to Th-234
the decay of Th-234 to Ra-226
the decay of Ra-226 to Po-214
the decay of Po-214 to Pb-206
The decay process of each isotope depends on their half-lives. The half-life is the amount of time required for half of the initial sample to decay.
U-238 has a half-life of 4.5 billion years, which means it takes billions of years for half of the U-238 to decay. Th-234 has a half-life of 24 days, which is relatively short compared to U-238. Ra-226 has a half-life of 1,600 years, which is shorter than U-238 but longer than Th-234. Po-214 has a half-life of 164 microseconds, which is incredibly short compared to the other isotopes. Pb-206 is a stable isotope, which means it does not undergo radioactive decay.
Therefore, the decay of Po-214 to Pb-206 is the fastest decay process of the four isotopes mentioned above, and the decay of U-238 to Th-234 is the slowest. The decay of Th-234 to Ra-226 and Ra-226 to Po-214 are intermediate decay processes.
To know more about isotope refer here
https://brainly.com/question/12955625#
#SPJ11