show the shape and appearance of the arrangement of atoms in a compound.

There are a few reasons why the demand for ammonia has increased over time:

Hope This Helps You!

Answer:

The solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .

Explanation:

Concentration is defined as the amount of a substance in a given apquantitybof solvent or solution. The unit of concentration is usually given as mol/litre

Mathematically, concentration = Number of moles of solute/ volume of solution in litres.

To determine the solution that is least concentrated from the given solutions, their concentrations in mol/L is calculated.

Concentration of solution containing 4 moles of solute dissolved in 6 liters of solution = 4 mol/6 litres = 0.67 mol/L

Concentration of solution containing 1 mole of solute dissolved in 1 litre of solution = 1 mol/ 1 litre = 1 mol/L

Concentration of solution containing 1 mole of solute dissolved in 1 liter of solution = 1 mol/ 1 litre = 1 mol/L

Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles / 4 litres = 2 mol/L

Concentration of solution containing 8 moles of solute dissolved in 4 liters of solution = 8 moles/ 4 litres = 2 mol/L

Concentration of solution containing 3 moles of solute dissolved in 2 liters of solution = 3 moles / 2 litres = 1.5 mol/L

Therefore, the solution that is least concentrated is the one containing 4 moles of solute dissolved in 6 liters of solution .

Answer:

I think Option no D is the suitable answer

Answer:

1.c 2.j 3.h 4.a 5.d 6. b 7.k 8.e

Explanation:

Answer:

C) N2O5

Explanation:

The syringes' circle measures area 10.17 square inches.

The area of a circle is the area that a circle occupies on a two-dimensional plane. The region contained by the circle's radius or perimeter is another way to define the circle's area. The circle's radius, or r, is equal to its diameter in half.

We need to calculate the area of the circle

You may determine the circle's surface area via

Change the formula's value for r.

Area of circle =π[tex]r^{2}[/tex]

Area of circle =3.14[tex]\times[/tex]1.80[tex]\times[/tex]1.80

Area of circle =10.17 [tex]cm^{2}[/tex]

Hence the area of the Circle is 10.17[tex]cm^{2}[/tex]

Learn more about area.

brainly.com/question/27683633

#SPJ4

Almost all of the oxygen (O2) one consumes in breathing is converted to: b. carbon dioxide (CO2).

When we breathe in oxygen, it is used in cellular respiration, which is the process by which our body converts glucose and oxygen into energy in the form of ATP. In the process, the oxygen is combined with the hydrogen atoms from glucose to form water, and the carbon atoms from glucose are converted to carbon dioxide (CO2) as a waste product. Therefore, almost all of the oxygen that one consumes in breathing is converted to carbon dioxide (CO2).Breathing is the process by which an organism takes in oxygen and expels carbon dioxide. In humans and other mammals, this process is accomplished through the respiratory system, which includes the nose, trachea, bronchi, and lungs. When we inhale, air is drawn into the lungs through the nose or mouth, passing through the trachea and bronchi before reaching the alveoli, which are small air sacs in the lungs where gas exchange occurs.

To learn more about oxygen (O2) here:

https://brainly.com/question/9714175

#SPJ4

Yes!

Explanation:

If density is greater, the object sinks. Saturn is mainly composed of the lightest two gases known, hydrogen and helium. It is the only planet in our solar system whose density is less than water.

Answer:

You haven't put an image so that I can determine your answer

Explanation:

Answer:

Point A represents a location on a tectonic plate boundary. Plates X and Y represent major tectonic plates. The island of Crete; the Anatolian Plate, which is a minor tectonic plate; and the Hellenic Trench have been labeled. Arrows indicate the relative directions of plate motion.

Explanation:

Option B, Using an excess of aldehyde in the aldol-dehydration reaction is done primarily to ensure complete conversion of the reactants to the desired product.

An excess of aldehyde is used to ensure that there is a sufficient concentration of the aldehyde present in order to form the enolate anion, which is the reactive intermediate in the aldol-dehydration reaction. To achieve high yield: Using an excess of aldehyde allows for the formation of multiple enolate anions, which increases the chances of a double aldol-dehydration reaction taking place, resulting in the formation of the desired product. Using an excess of aldehyde helps aldol-dehydration to prevent this by reducing the exposure of the aldehyde to air.

Learn more about aldol-dehydration here:

https://brainly.com/question/23798009

#SPJ4

The final temperature of the mixture when no heat loss to the surroundings is equal to 69.57 °C

The specific heat capacity can be defined as the amount of heat required to increase the temperature in 1 unit of substance by 1° Celcius.

The specific heat capacity can be expressed in the form of the mentioned formula below:

Q = mSΔT

The specific heat capacity of the water, S = 4.184 J/g°C

The heat lost by water = heat gained by the ice

Heat lost by water = heat gained by the ice + heat increased by the water

m₁S₁ (T₂ - T₁) = m₂L + m₂S₂ (T₂ - T₁)

103.5 × 4.18 × (73- T) = 13.1  × (2.03) + 5 × 4.18 × (T-0)

31582 - 432.63 T = 26.59 + 20.9 T

453.53 T = 31555

T = 69.57 °C

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

Answer:

[tex]T_2=238.57^{\circ} C[/tex]

Explanation:

Given that,

Initial volume, V₁ = 43 L

Initial temperature, T₁ = 225℃ = 498 K

Final volume, V₂ = 20.6 L

We need to find the final temperature. We know that, the relation between volume and temperature is given by :

[tex]V\propto T\\\\\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\T_2=\dfrac{T_1V_2}{V_1}[/tex]

Put all the values,

[tex]T_2=\dfrac{498\times 20.6}{43}\\\\T_2=238.57^{\circ} C[/tex]

So, the final temperature is equal to [tex]238.57^{\circ} C[/tex].

Answer:you answer would be B

Explanation:and I'm bc I took the rest lol

Parellel Curcuit Explanation: I took the Test On k12

When only 1 mol of oxygen was intended to be produced, a process instead yields 4.93 L of oxygen. The percent yield of the reaction is 493%.

Percent yield is a measure of how much of the desired product is produced in a chemical reaction. It is calculated by comparing the actual yield of a product to the theoretical yield, which is the amount of product that would be produced if the reaction were 100% efficient.

To calculate the percent yield, you can use the formula:

= percent yield

= (actual yield / theoretical yield) x 100%

The theoretical yield of a reaction is calculated by multiplying the number of moles of reactant used by the stoichiometry of the reaction. In this case, the reaction is supposed to produce 1 mol of oxygen, which is the theoretical yield. To calculate the actual yield, we can use the Ideal gas law PV = nRT, where P is the pressure, V is the volume, n is the number of mol. Since we know that V = 4.93 L, we can use this information to find n:

= n

= (PV) / RT

The actual yield is 4.93 L of O2 or 4.93 L of any gas at STP (Standard Temperature and Pressure) is equivalent to 4.93 moles of O2.

Then we can use this information to calculate the percent yield:

= percent yield

= (actual yield / theoretical yield) x 100%

= (4.93 moles O2 / 1 mole O2) x 100%

= 493%

So, the percent yield of the reaction is 493%.

It's important to note that a percent yield of greater than 100% is usually an indication of an error in the measurement or calculation of the actual yield, or it could be an indication that the theoretical yield is incorrect.

To know more about oxygen please refer: https://brainly.com/question/1506082

#SPJ4

A law summarizes a set of observations about an experiment.

Chemical law: Most of the properties and the atomic structure of the elements vary periodically when the elements are arranged in the order of their atomic numbers.

A sound explanation for observations is referred to as a theory. A summary of the relationship between variables constitutes a scientific law. A controlled method of testing a hypothesis is through an experiment.

The fundamental chemistry laws in chemistry are considered to be the following three: the mass conservation principle. the principle of proportional equality. A multiple proportions law.

To know more about chemical law visit:

https://brainly.com/question/29640690

#SPJ1

Answer:

no picture you need add it

Answer: The percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.

Explanation:

Given: Volume of solute = 120 mL

Volume of solvent = 350 mL

Now, total volume of the solution is as follows.

[tex]V_{total} = V_{solute} + V_{solvent}\\= 120 mL + 350 mL\\= 470 mL[/tex]

Let us assume that 100 mL of solution is taken and the amount of isopropyl alcohol present in it is as follows.

[tex]\frac{V_{solute}}{V_{total}} \times 100 mL\\\frac{120 mL}{470} \times 100 mL\\= 25.53 mL[/tex]

Hence, there is 25.53 mL isopropyl alcohol is present in 100 mL of solution. Therefore, %v/v is calculated as follows.

[tex]Percent (v/v) = \frac{25.53 mL}{100 mL}\\= 25.5%[/tex]

Thus, we can conclude that the percent by volume of isopropyl alcohol in a solution made by mixing 120 mL of the alcohol with enough water to make 350 mL of solution is 25.5%.

Answer:

8

Explanation:

Its official chemical symbol is O, and its atomic number is 8, which means that an oxygen atom has eight protons in its nucleus

Answer:

Freezing T° of solution = - 3.72°C

Boiling T° of solution =  101.02°C

Explanation:

To solve this we apply colligative properties. Firstly, freezing point depression:

ΔT = Kf . m . i

ΔT = Freezing T° of pure solvent - Freezing T° of solution

Kf = Cryoscopic constant, for water is 1.86 °C/m

m = molality (moles of solute in 1kg of solvent)

i = Ions dissolved in solution

Our solute is sucrose, an organic compound so no ions are defined. i = 1.

Let's determine the moles: 68.4 g . 1mol/ 342g = 0.2 moles

molality = 0.2 mol / 0.1kg of water = 2 m

We replace data: ΔT = 1.86°C/m . 2m . 1

Freezing T° of solution = - 3.72°C

Now, we apply elevation of boiling point: ΔT = Kb . m . i

ΔT = Boiling T° of solution - Boiling T° of  pure solvent

Kf = Ebulloscopic constant, for water is 0.512 °C/m

We replace:

Boiling T° of solution - Boiling T° of pure solvent = 0.512 °C/m . 2 . 1

Boiling T° of solution = 0.512 °C/m . 2 . 1 + 100°C → 101.02°C

Answer:

covalent bond

the answer is short I don6 know why brainly is telling me it needs to be 20 characters long

Answer:

yes

Explanation:

60/500 is less than 133/1000 meaning that the glucose will be able to disolve without a salute

Answer:

C C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O

Explanation:

La ley de conservación de la materia implica que en una reacción química los átomos en los reactivos son iguales a la cantidad de átomos en los productos:

A C2H5OH(l) + O2(g) → CO2 + H2O

En los reactivos hay dos átomos de carbono pero en los productos solo 1. De esta manera, no cumple la ley de conservación.

B C2H5OH(l) + O2(g) → 2CO2 + H2O

En los reactivos hay 6 átomos de hidrógeno pero en los productos solo 2. No cumple la ley de conservación.

C C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O

En los reactivos y productos hay: 2 átomos de carbono, 6 átomos de hidrógeno y 7 átomos de oxígeno. Cumple la ley de conservación.

D C2H5OH(l) + O2(g) → 2CO2 + 3H2O

En los reactivos hay 3 átomos de oxígeno y en los productos 7. No cumple la ley de conservación.

E 2C2H5OH(l) + 3O2(g) → 2CO2 + 3H2O

En los reactivos hay 4 átomos de carbono y en los productos solo dos. No cumple la ley de conservación.

The measurement of expired CO₂ that typically provides a numeric display of the partial pressure of CO₂ in torr or mmHg is the capnometry.

The capnometry measurement of the  CO₂ , carbon dioxide is the measurement in the expired air and it provides the clinician with the noninvasive measurement of systemic metabolism and the ventilation. it is used to determine the correlation in between the tidal CO₂  and the partial CO₂  in the non intubated breathless patents.

Thus, the measurement if the expired CO₂  that shows the partial pressure of the CO₂  is the capnometry.

To learn more about pressure here

https://brainly.com/question/9226237

#SPJ4

The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat. This statement is true.

The bowling ball pendulum did not hit Bill Nye in the face because potential energy will always be greater than kinetic energy. When a force (a push or a pull) acts on something over a long distance, this occurs.

For instance, if the object is positioned at a higher height, its kinetic energy will be higher. Potential energy is not transferable and varies with object mass, height, and distance.

Thus, The bowling ball pendulum didn’t hit Bill Nye in the face because the amount of kinetic energy can never be more than the amount of potential energy, some of the energy is transferred to heat.

To learn more about the bowling ball pendulum, follow the link;

https://brainly.com/question/21052088

#SPJ1

This double displacement reaction and the coefficients of all the reactants and products in this balanced chemical reaction is Bacl₂ + Na₂CO₃ = BaCO₃ + 2Nacl.

A double displacement reaction is a particular type of reaction in which two reactants swap ions to produce two new molecules. Water-soluble ionic compounds interact with one another in a number of double displacement processes.

Coefficients are the numbers or expressions put in front of a chemical symbol or formula to balance chemical equations. It provides information on the number of atoms or molecules of the drug or chemical that are a part of the reaction.

When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process. Chemical reactions typically involve a chemical change and produce one or more products, which typically differ from the reactants in some ways.

To know more about double displacement reaction, check out:

https://brainly.com/question/23918356

#SPJ1

Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.

An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.

The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.

You can also learn about dibromide from the following question:

https://brainly.com/question/11530316

#SPJ4

The concentration of the HCl solution is 0.816 M (or 816 mM).

To determine the concentration of the HCl solution, we can use the balanced equation for the neutralization reaction between HCl and NaOH:

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)

This reaction is a neutralization reaction, which means that the number of moles of H+ ions (from the HCl) is equal to the number of moles of OH- ions (from the NaOH).

Given that 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of HCl, we can use the volume and molarity of the NaOH solution to determine the number of moles of OH- ions:

Molarity = moles of solute/litres of solution

Moles of OH- = (20.4 mL x 1 M) / 1000 mL/L = 0.0204 moles

Since the number of moles of H+ ions is equal to the number of moles of OH- ions, we can use the number of moles of OH- to determine the number of moles of H+ ions:

moles of H+ = moles of OH- = 0.0204 moles

We can then use the number of moles of H+ ions and the volume of the HCl solution to determine the concentration of the HCl solution:

Molarity = moles of solute/litres of solution

concentration of HCl = moles of H+ / (25 mL / 1000 mL/L) = 0.0204 moles / 0.025 L = 0.816 M (or 816 mM)

Therefore, the concentration of the HCl solution is 0.816 M (or 816 mM).

Learn more about Neutralization Reaction here: https://brainly.com/question/28970253

#SPJ4