Slits are separated by 0.1mm. The screen is 3.0m from the source what is the wavelength. , the wavelength of light in this double-slit interference pattern is approximately 1.25 x 10^(-5) m.
To determine the wavelength of light given the separation between slits and the distance to the screen, we can use the equation for the location of the nodal lines in a double-slit interference pattern:
d * sin(θ) = m * λ
Where:
d is the separation between the slits (0.1 mm = 0.1 x 10^(-3) m)
θ is the angle between the central maximum and the m-th nodal line
m is the order of the nodal line (m = 8 in this case)
λ is the wavelength of light (to be determined)
We can rearrange the equation to solve for λ:
λ = d * sin(θ) / m
The angle θ can be approximated using the small-angle approximation:
θ ≈ x / L
Where x is the distance from the central maximum to the m-th nodal line (given as 10 cm = 0.1 m), and L is the distance from the source to the screen (3.0 m).
Substituting the known values:
θ ≈ 0.1 m / 3.0 m
θ ≈ 0.0333
Now we can substitute these values into the equation to calculate the wavelength:
λ = (0.1 x 10^(-3) m) * sin(0.0333) / 8
Calculating the value:
λ ≈ 1.25 x 10^(-5) m
Therefore, the wavelength of light in this double-slit interference pattern is approximately 1.25 x 10^(-5) m.
Learn more about double-slit interference pattern here:
https://brainly.com/question/31807318
#SPJ11
How much work is required to stop a 1500 kg car moving at a speed of 20 m/s ? −600,000 J −300,000 J None listed Infinite −25,000 J
Therefore, the work done to stop the car is W = ΔKE = (1/2)mv² = (1/2) × 1500 kg × (20 m/s)² = 600,000 joules. So, the correct option is −600,000 J.
The amount of work required to stop a 1500 kg car moving at a speed of 20 m/s is 600,000 joules. Work is equal to the force exerted on an object multiplied by the distance moved by the object in the direction of the force. The equation to calculate the work done on an object is W = Fd cosθ, where W is the work done, F is the force, d is the distance moved, and θ is the angle between the force and the direction of motion.
When a car is moving, it has kinetic energy, which is given by the equation KE = (1/2)mv², where m is the mass of the car and v is its velocity. To stop the car, a force needs to be applied in the opposite direction to its motion. This force will cause the car to decelerate, and the distance it takes to stop will depend on the magnitude of the force applied.
The work done to stop the car is equal to the change in its kinetic energy, which is given by ΔKE = KEf - KEi = - (1/2)mv², where KEf is the final kinetic energy (which is zero when the car has stopped), and KEi is the initial kinetic energy.
Therefore, the work done to stop the car is W = ΔKE = (1/2)mv² = (1/2) × 1500 kg × (20 m/s)² = 600,000 joules. So, the correct option is −600,000 J.
Learn more about velocity here,
https://brainly.com/question/80295
#SPJ11
A block of mass m=10 kg is on a frictionless horizontal surface and pushed against the spring, whose spring constant k=240 N/m, compressing the spring by 3 m. The block is then released from rest. The block is observed to move up the incline and come back down, hitting and compressing the spring by a maximum distance of 1 m. The inclined plane has friction and makes an angle of θ=37 ∘
with the horizontal. a) Find the work done by friction from the moment the block is released till the moment it strikes the spring again. b) What is the maximum height the block can reach? c) Find the kinetic friction coefficient between the block and the inclined plane.
Substituting the given values and solving for μk gives:344.1 J = μk (10 kg)(9.8 m/s²) cos 37° (2 m)μk ≈ 0.530Therefore, the kinetic friction coefficient between the block and the inclined plane is approximately 0.530.
a) The work done by friction from the moment the block is released till the moment it strikes the spring again.Friction is the force that opposes the movement of an object. The work done by friction is negative because it opposes the direction of motion. In this case,
the work done by friction will result in a decrease in the kinetic energy of the block as it moves up the incline and then returns back down to the spring.When the block moves up the incline, the work done by friction is given by:Wf = μk N d = μk mg sin θ dwhere μk is the coefficient of kinetic friction, N is the normal force, d is the distance moved up the incline, m is the mass of the block, g is the acceleration due to gravity, and θ is the angle of the incline.
Substituting the given values gives:Wf = μk (10 kg)(9.8 m/s²) cos 37° (3 m)Wf ≈ 253.6 JWhen the block comes back down and hits the spring, the work done by friction is given by:Wf = μk N d = μk mg sin θ dwhere d is the distance moved down the incline before the block hits the spring.
Substituting the given values gives:Wf = μk (10 kg)(9.8 m/s²) cos 37° (1 m)Wf ≈ 84.5 JThe total work done by friction is the sum of the work done going up and the work done coming back down:Wf,total = Wf,up + Wf,downWf,total = 253.6 J + 84.5 JWf,total ≈ 338.1 JTherefore, the work done by friction from the moment the block is released till the moment it strikes the spring again is approximately 338.1 J.b)
The maximum height the block can reachThe maximum height the block can reach can be found by using the conservation of energy principle. The initial energy of the block is the potential energy stored in the spring, which is given by:Uspring = (1/2) k x²where k is the spring constant and x is the compression of the spring.Substituting the given values gives:Uspring = (1/2) (240 N/m) (3 m)²Uspring = 1080 JWhen the block reaches the maximum height,
all its potential energy is converted to kinetic energy, which is given by:K = (1/2) m v²where m is the mass of the block and v is its velocity.Substituting the given values gives:1080 J = (1/2) (10 kg) v²v = sqrt(216) m/sv ≈ 14.7 m/sThe maximum height the block can reach is given by:h = (1/2) v²/g sin² θwhere g is the acceleration due to gravity and θ is the angle of the incline.Substituting the given values gives:h = (1/2) (14.7 m/s)²/ (9.8 m/s²) sin² 37°h ≈ 3.55 mTherefore,
the maximum height the block can reach is approximately 3.55 m.c) The kinetic friction coefficient between the block and the inclined planeThe kinetic friction coefficient between the block and the inclined plane can be found using the maximum height the block can reach. When the block reaches the maximum height, all its potential energy is converted to kinetic energy.
Therefore, the kinetic energy of the block at the maximum height is given by:K = (1/2) m v²where m is the mass of the block and v is its velocity.Substituting the given values gives:K = (1/2) (10 kg) (14.7 m/s)²K ≈ 1080 JAt the maximum height, the block stops moving and starts to slide back down the incline. At this point, the kinetic energy of the block is converted to potential energy and the work done by friction is negative because it opposes the direction of motion.
Therefore, we can write:K = Ug - |Wf|where Ug is the potential energy of the block at the maximum height.Substituting the given values gives:1080 J = (10 kg) (9.8 m/s²) h - |Wf|where h is the maximum height the block can reach.Substituting the value of h obtained in part (b) gives:1080 J = (10 kg) (9.8 m/s²) (3.55 m) - |Wf|Solving for |Wf| gives:|Wf| ≈ 344.1 JWhen the block slides back down the incline,
the work done by friction is given by:Wf = μk N d = μk mg sin θ dwhere μk is the coefficient of kinetic friction, N is the normal force, d is the distance moved down the incline, m is the mass of the block, g is the acceleration due to gravity, and θ is the angle of the incline.
Substituting the given values and solving for μk gives:344.1 J = μk (10 kg)(9.8 m/s²) cos 37° (2 m)μk ≈ 0.530Therefore, the kinetic friction coefficient between the block and the inclined plane is approximately 0.530.
to know more about friction
https://brainly.com/question/31226
#SPJ11
The cycle below described by a perfect gas in the diagram (P, V) is considered.
To describe such a cycle, the gas is successively in contact with two thermostats: one, the hot source at temperature T1 = 300 K; the other, the cold source at temperature T2 = 250 K.
Gas transformations are reversible. AB and CD transformations are therefore isotherms and BC and DA transformations are adiabatics (no heat exchange). The heat received by the gas in the CD isothermal transformation is Q2 = 1000 kJ.
1)What is the entropy variation for the ABCDA cycle?
2) Calculate the heat Ql received by the gas in the ISothermal transformation AB.
1) The entropy variation for the ABCDA cycle is 150.2) The heat Ql received by the gas in the isothermal transformation AB is 832.8kJ.What is the definition of entropy?Entropy is the extent of the randomness or the molecular disorder of a system. Entropy is a measure of the degree of disorder of a system.
The units of entropy are joules per kelvin per mole (J K-1 mol-1).What is the definition of the first law of thermodynamics?The First Law of Thermodynamics is a statement of the Law of Energy Conservation, which states that energy cannot be created or destroyed, but it can be converted from one form to another. The first law of thermodynamics is also known as the Law of Conservation of Energy.What is the definition of the second law of thermodynamics?The second law of thermodynamics is an assertion that all physical processes or spontaneous transformations of energy go from states of higher order to states of lower order, that the entropy of an isolated system will tend to increase over time, approaching a maximum value at equilibrium. The second law of thermodynamics is responsible for the flow of heat from hot to cold and for the impossibility of building perpetual motion machines.
Learn more on entropy here:
brainly.in/question/15044680
#SPJ11
Ocean waves with a wavelength of 10 m and a frequency of 0.2 Hz strike an opening (width = 10 m) in a seawall straight on. If a flat beach is parallel to the seawall and 200 m from it, (a) where on the beach will the water flow the farthest inland and (b) where does the water at the beach barely move at all?
(a) The maximum displacement of the waves from the mean position on the shore is given by
d(max) = 2*a,
where "a" is the amplitude of the wave.
The amplitude is given by the product of the wave's speed (v), frequency (f) and wavelength (λ).
v = λ*f = (10 m)(0.2 Hz) = 2 m/s.a = (1/2)v/f = (1/2)(2 m/s)/(0.2 Hz) = 5 m.d(max) = 2*a = 10 m
Therefore, the maximum displacement of the waves from the mean position on the shore is 10 m. The farthest point of the beach that the waves will reach is therefore 200 m + 10 m = 210 m from the seawall.
(b) The point of the beach at which the waves barely move at all is called the node. At the node, the displacement of the waves from the mean position is zero.
The location of the node is given by the formula:
x = n*(λ/2),where n is an integer. Since the width of the opening in the seawall is 10 m, the waves that will strike the seawall must have a wavelength of 10 m.
Therefore,λ = 10 m.x = n*(λ/2) = n*(10/2) = 5n m
To find the nodes, we need to find the values of n that make x a multiple of 5 m. Therefore, the nodes are located at every 5 m along the shore starting from 200 m, i.e., 200 m, 205 m, 210 m, 215 m, ...The water at the beach will barely move at all at the nodes.
Therefore, the locations of the nodes are where the water on the beach barely moves.
Learn more about maximum displacement here
https://brainly.com/question/30266030
#SPJ11
You decide to go for a drive on a beautiful summer day. When you leave your house, your tires are at 25°C but as you drive on the hot asphalt, they raise to 39.49°C. If the original pressure was 2.20×105Pa, what is the new pressure in your tires in Pa assuming the volume hasn't changed?
The new pressure of the tires is 2.43 x 10^5 Pa.
The ideal gas law explains the relationship between the volume, pressure, and temperature of a gas.
The formula for the ideal gas law is
PV = nRT
where
P represents pressure,
V represents volume,
n represents the number of moles of gas,
R is the gas constant,
T represents temperature, in Kelvin
Kelvin = Celsius + 273.15°Celsius = Kelvin - 273.15
T1 = 25°C = 25 + 273.15 = 298.15 K
T2 = 39.49°C = 39.49 + 273.15 = 312.64 K
Pressure 1 = 2.20 x 10^5 Pa
Since the volume remains constant in this situation, we can make a direct comparison of pressure and temperature. Using the formula:
P1/T1 = P2/T2;
Where
P1 and T1 are the initial pressure and temperature,
P2 and T2 are the final pressure and temperature
Substituting the values we get,
P1/T1 = P2/T2
2.20 x 10^5/298.15 = P2/312.64
P2 = 2.43 x 10^5 Pa
Therefore, the new pressure is 2.43 x 10^5 Pa.
Learn more about pressure:
https://brainly.com/question/24719118
#SPJ11
A diesel engine lifts the hammer of a machine, a distance of 20.0 m in 5 sec. If the hammer weighs 2.250 N, how much power does the motor develop?
A diesel engine lifts the hammer of a machine, a distance of 20.0 m in 5 sec. If the hammer weighs 2.250 N, the motor develops 9.0 Watts of power.
To calculate the power developed by the motor, we can use the formula:
Power = Work / Time
The work done by the motor is equal to the force applied multiplied by the distance traveled by the hammer:
Work = Force × Distance
In this case, the force applied by the motor is the weight of the hammer, which is given as 2.250 N, and the distance traveled by the hammer is 20.0 m. Therefore:
Work = 2.250 N × 20.0 m = 45.0 J (Joules)
The time taken to lift the hammer is given as 5 sec.
Now, we can calculate the power:
Power = Work / Time = 45.0 J / 5 sec
Calculating the value:
Power = 9.0 W (Watts)
Therefore, the motor develops 9.0 Watts of power.
To learn more about Power visit: https://brainly.com/question/11569624
#SPJ11
(a)write a question about viscosity and laminar flow.
(b) write a question about the difference between Young's modulus, shear modulus, and bulk modulus.
(c) write questions about decibels and the physics of human hearing.
In contrast to turbulent flow, in which the fluid experiences random fluctuations and mixing, laminar flow, also known as streamline flow, is a type of fluid (gas or liquid) movement in which the fluid travels smoothly or along regular patterns.
(a) How does viscosity affect the flow of fluids, particularly in relation to laminar flow and turbulent flow?
(b) What are the differences between Young's modulus, shear modulus, and bulk modulus in terms of their definitions, applications, and physical interpretations?
(c) How are decibels used to measure and quantify sound levels, and what is the relationship between decibels and the physics of human hearing? How does the human ear perceive different levels of sound and how does it relate to decibel measurements?
To know more about laminar flow
https://brainly.com/question/23008935
#SPJ11
Given that the Sun's lifetime is about 10 billion years, estimate the life expectancy of a a) 0.2-solar mass, 0.01-solar luminosity red dwarf b) a 3-solar mass, 30-solar luminosity star c) a 10-solar mass, 1000-solar luminosity star
The life expectancy of the given stars are:a) 0.2-solar mass, 0.01-solar luminosity red dwarf: 10 trillion yearsb) 3-solar mass, 30-solar luminosity star: 10 million yearsc) 10-solar mass, 1000-solar luminosity star: 10 million years.
The life expectancy of a star is determined by its mass and luminosity. The more massive and luminous the star is, the shorter its life expectancy is. Hence, using this information, we can estimate the life expectancy of the following stars:a) 0.2-solar mass, 0.01-solar luminosity red dwarfRed dwarfs are known to have the longest life expectancies among all types of stars. They can live for trillions of years.
Hence, a 0.2-solar mass, 0.01-solar luminosity red dwarf is expected to have a much longer life expectancy than the Sun. It could live for up to 10 trillion years or more.b) 3-solar mass, 30-solar luminosity starA 3-solar mass, 30-solar luminosity star is much more massive and luminous than the Sun. As a result, it will have a much shorter life expectancy than the Sun.
Based on its mass and luminosity, it is estimated to have a lifetime of around 10 million years.c) 10-solar mass, 1000-solar luminosity starA 10-solar mass, 1000-solar luminosity star is extremely massive and luminous. It will burn through its fuel much faster than the Sun, resulting in a much shorter life expectancy. Based on its mass and luminosity, it is estimated to have a lifetime of only around 10 million years as well.
Therefore, the life expectancy of the given stars are:a) 0.2-solar mass, 0.01-solar luminosity red dwarf: 10 trillion yearsb) 3-solar mass, 30-solar luminosity star: 10 million yearsc) 10-solar mass, 1000-solar luminosity star: 10 million years.
Learn more about luminosity here,
https://brainly.com/question/20308478
#SPJ11
AP1: a) Write down the Electric and Magnetic fields for a plane wave travelling in +z direction that is linearly polarized in the x direction. b) Calculate the Poynting vector for this EM wave c) Calculate the total energy density for this wave d) Verify that the continuity equation is satisfied for this wave.
a) Electric and Magnetic fields for a plane wave travelling in +z direction is
E₀ cos(kz - ωt) î and B₀ cos(kz - ωt) ĵ.
b)Poynting vector for this EM wave is (1/μ₀) E₀ B₀ (cos)² (k z - - ω t ) k
c)total energy density for this wave is (1/2μ₀) (E₀² + B₀²) cos²(kz - ωt)
d)continuity equation for this wave is ∂u/∂t + ∇ · S = 0
a) For a plane wave traveling in the +z direction that is linearly polarized in the x direction, the electric field (E) and magnetic field (B) can be written as:
Electric field: E(x, y, z, t) = E₀ cos(kz - ωt) î
Magnetic field: B(x, y, z, t) = B₀ cos(kz - ωt) ĵ
where,
E₀ and B₀ are the amplitudes of the electric and magnetic fields
k is the wave number
ω is the angular frequency
î and ĵ are unit vectors in the x and y directions, respectively.
b) The Poynting vector (S) for this electromagnetic wave can be calculated as:
S(x, y, z, t) = (1/μ₀) E(x, y, z, t) × B(x, y, z, t)
where
μ₀ is the permeability of free space
× denotes the cross product.
Since E and B are perpendicular to each other, their cross product will be in the z direction.
S(x, y, z, t) = (1/μ₀) E₀ B₀ (cos)² (k z - - ω t ) k
where,
k is the unit vector in the z direction.
c) The total energy density (u) for this wave can be calculated using the equation:
u(x, y, z, t) = (1/2μ₀) (E(x, y, z, t)² + B(x, y, z, t)²)
Substituting the values of E and B into the equation, we get:
u(x, y, z, t) = (1/2μ₀) (E₀² + B₀²) cos²(kz - ωt)
d) The continuity equation for electromagnetic waves states that the rate of change of energy density with respect to time plus the divergence of the Poynting vector should be zero.
Mathematically, it can be written as:
∂u/∂t + ∇ · S = 0
Taking the derivatives and divergence of the expressions obtained in parts b) and c) we can verify if the continuity equation is satisfied for this wave.
learn more about magnetic field :
https://brainly.com/question/19542022
#SPJ4
A fly ball is hit to the outfield during a baseball game. Let's neglect the effects of air resistance on the ball. The motion of the ball is animated in the simulation (linked below). The animation assumes that the ball's initial location on the y axis is y0 = 1 m, and the ball's initial velocity has components v0x = 20 m/s and v0y = 20 m/s. What is the initial angle (In degrees) of the baseball's velocity? (Write only the numerical value of the answer and exclude the unit)
The initial angle (in degrees) of the baseball's velocity is 45.
Initial velocity has components v0x = 20 m/s and v0y = 20 m/s. The initial location on the y-axis is y0 = 1 m. Neglect the effects of air resistance on the ball.
We need to find the initial angle of the baseball's velocity.
Initial velocity has two components:
v0x = 20 m/s in the horizontal direction
v0y = 20 m/s in the vertical direction
Initial velocity of a projectile can be broken into two components:
v0x = v0 cosθ
v0y = v0 sinθ
Here,
v0 = initial velocity
θ = the angle made by the initial velocity with the horizontal direction
Given,
v0x = 20 m/s and v0y = 20 m/s, then
v0 = √(v0x^2 + v0y^2)
= √((20)^2 + (20)^2)
= 28.2842712475 m/s
Let θ be the initial angle of the baseball's velocity.
Then,
v0x = v0 cosθ
20 = 28.2842712475 × cosθ
cosθ = 20 / 28.2842712475
cosθ = 0.70710678118
θ = cos⁻¹(0.70710678118) = 45°
Hence, the initial angle (in degrees) of the baseball's velocity is 45.
Learn more about initial velocity: https://brainly.com/question/19365526
#SPJ11
A skydiver weighing 264 lbf (including equipment) falls vertically downward from an altitude of 4000 ft and opens the parachute after 13 s of free fall. Assume that the force of air resistance, which is directed opposite to the velocity, is 0.74 | v| when the parachute is closed and 14 |v| when the parachute is open, where the velocity v is measured in ft/s. Use g = 32 ft/s². Round your answers to two decimal places. (a) Find the speed of the skydiver when the parachute opens. v(13) = i ft/s (b) Find the distance fallen before the parachute opens. x(13) = i ft (c) What is the limiting velocity v₁ after the parachute opens? VL = i ft/s
A skydiver weighing 264 lbf (including equipment) falls vertically downward from an altitude of 4000 ft. the speed of the skydiver when the parachute opens is approximately 355.68 ft/s. The distance fallen before the parachute opens is approximately 3388 ft.
To solve the given problem, we'll apply the principles of Newton's second law and kinematics.
(a) To find the speed of the skydiver when the parachute opens at 13 seconds, we'll use the equation of motion:
F_net = m * a
For the skydiver in free fall before the parachute opens, the only force acting on them is gravity. Thus, F_net = -m * g. We can set this equal to the air resistance force:
-m * g = -0.74 * v
Solving for v, we have:
v = (m * g) / 0.74
To calculate the weight of the skydiver, we convert 264 lbf to pounds (1 lbf = 1 lb), and then to mass by dividing by the acceleration due to gravity:
m = 264 lb / 32 ft/s² ≈ 8.25 slugs
Substituting the values, we find:
v = (8.25 slugs * 32 ft/s²) / 0.74 ≈ 355.68 ft/s
So, the speed of the skydiver when the parachute opens is approximately 355.68 ft/s.
(b) To determine the distance fallen before the parachute opens, we'll use the equation:
x = x₀ + v₀t + (1/2)at²
Since the skydiver starts from rest (v₀ = 0) and falls for 13 seconds, we can calculate x:
x = (1/2)gt²
= (1/2) * 32 ft/s² * (13 s)²
≈ 3388 ft
The distance fallen before the parachute opens is approximately 3388 ft.
(c) The limiting velocity (v₁) is the terminal velocity reached after the parachute opens. At terminal velocity, the net force is zero, meaning the air resistance force equals the force due to gravity:
0 = m * g - 14 * |v₁|
Solving for v₁:
|v₁| = (m * g) / 14
Substituting the known values:
|v₁| = (8.25 slugs * 32 ft/s²) / 14 ≈ 18.71 ft/s
The limiting velocity after the parachute opens is approximately 18.71 ft/s. At this velocity, the air resistance force and the force of gravity balance out, resulting in no further acceleration.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
When can the equations of kinematics be used to describe the motion of an object? They can be used only when the object has variable velocity. They can be used only when the object has constant velocity. They can be used only when the object is undergoing variable acceleration. They can be used only when the object is undergoing constant acceleration.
Option d is correct. The equations of kinematics are used to describe the motion of an object only when the object is undergoing constant acceleration.
The equations of kinematics are mathematical expressions that relate the motion of an object to its displacement, velocity, and acceleration. These equations are derived from basic principles of motion and can be used to analyze and predict the behaviour of objects in motion.
However, their applicability depends on certain conditions. In this case, the equations of kinematics can be used only when the object is undergoing constant acceleration. Constant acceleration means that the object's rate of change of velocity is constant over time.
When an object experiences constant acceleration, the equations of kinematics can accurately describe its motion, allowing us to calculate various parameters such as displacement, velocity, and time taken. If the object has variable velocity or is undergoing variable acceleration, different equations or more advanced methods may be required to analyze its motion accurately.
Learn more about kinematics here:
https://brainly.com/question/26407594
#SPJ11
The complete question is:
When can the equations of kinematics be used to describe the motion of an object?
a. They can be used only when the object has variable velocity.
b. They can be used only when the object has constant velocity.
c. They can be used only when the object is undergoing variable acceleration.
d. They can be used only when the object is undergoing constant acceleration.
- Where does the earth's magnetic field originate? What led
scientists to this conclusion?
- How is the earth's magnetic field expected to change?
The earth's magnetic field originates from the molten iron-rich core of the earth. It’s due to the flow of molten iron in the earth’s core that the magnetic field exists. The flow of the molten iron, driven by the heat from the earth's core, creates a dynamo effect.
The flow of the molten iron creates an electric current, which in turn produces a magnetic field that is thought to extend 10,000 km outward into space.
There is evidence that the earth's magnetic field has been present for at least 3.45 billion years. Furthermore, the earth's magnetic field is constantly changing and may even flip polarity over time. The geological record shows that the magnetic field has flipped many times in the past.
The earth's magnetic field is expected to change in the future as it has done so in the past. At present, the magnetic north pole is moving toward Russia at about 50 km per year. There is evidence that the magnetic field has been weakening over the past few centuries, and some scientists believe that this may be a sign that the field is preparing to flip polarity again.
The weakening of the magnetic field could cause significant problems for life on earth, as it would allow more harmful radiation from space to reach the planet's surface, but the effects of a polarity flip are unknown and difficult to predict.
Learn more about earth's magnetic field
https://brainly.com/question/14848188
#SPJ11
Each of four tires on an automobile has an area of 0.026 m in contact with the ground. The weight of the automobile is 2.6*104 N. What is the pressure in the tires? a) 3.1*10 pa E-weight 2.6*10" b) 1610pa =2.5x10 Pa - © 2.5*10pa UA 4*0.026 d) 6.2*10 pa pressure
To calculate the pressure in the tires, we can use the equation:
Pressure = Force / Area
Therefore, the correct answer is: (c) 1.0 × 10⁶ Pa
The weight of the automobile is the force acting on the tires, and each tire has an area of 0.026 m² in contact with the ground.
Given:
Weight of the automobile = 2.6 × 10⁴ N
Area of each tire in contact with the ground = 0.026 m²
Let's substitute these values into the equation to calculate the pressure:
Pressure = (2.6 × 10⁴ N) / (0.026 m²)
Pressure = 1.0 × 10⁶ N/m²
The pressure in the tires is 1.0 × 10⁶ N/m², which is equivalent to
1.0 × 10⁶ Pa.
Therefore, the correct answer is:
c) 1.0 × 10⁶ Pa
Learn more Force about here
https://brainly.com/question/30507236
#SPJ11
) Deduce, using Newton's Laws Motion, why a (net) force is being applied to a rocket when it is launched.
2) Does a rocket need the Earth, the launch pad, or the Earth's atmosphere (or more than one of these) to push against to create the upward net force on it? If yes to any of these, explain your answer. If no to all of these, then what does a rocket push against to move (if anything at all)? Explain your answer in terms of Newton's Laws of Motion.
Newton's Laws of Motion explain the motion of all objects, including rockets. Newton's third law of motion states that for every action, there is an equal and opposite reaction. When a rocket is launched, a (net) force is applied to it due to the action of hot gases being expelled out of the back of the rocket.
The force pushing the rocket forward is called the thrust, which is a result of the reaction to the hot gases being expelled out of the back of the rocket. This force is greater than the weight of the rocket, allowing it to lift off the ground. This is possible because of Newton's second law, which states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. As the mass of the rocket decreases due to the expelled fuel, its acceleration increases.
A rocket does not need the Earth, the launch pad, or the Earth's atmosphere to push against to create the upward net force on it. The thrust generated by the engine of the rocket provides the force to move the rocket upwards. According to Newton's Third Law of Motion, every action has an equal and opposite reaction. Therefore, as the rocket's engine burns fuel and expels hot gases out of its exhaust nozzle, a reaction force is produced in the opposite direction, which propels the rocket upward. This force is sufficient to overcome the force of gravity, which pulls the rocket downwards towards the Earth.
A rocket moves upwards when launched because of the force created by the expulsion of hot gases out of the back of the rocket. The thrust force is greater than the weight of the rocket, allowing it to lift off the ground. A rocket does not need the Earth, the launch pad, or the Earth's atmosphere to push against to create the upward net force on it, but it does require thrust generated by the engine of the rocket.
To know more about acceleration visit:
brainly.com/question/30499732
#SPJ11
A crate with a mass of 193.5 kg is suspended from the end of a uniform boom with a mass of 90.3 kg. The upper end of the boom is supported by a cable attached to the wall and the lower end by a pivot (marked X) on the same wall. Calculate the tension in the cable.
To calculate the tension in the cable supporting the boom and the crate, we need to consider the equilibrium of forces acting on the system.
The crate has a mass of 193.5 kg, while the boom itself has a mass of 90.3 kg. The upper end of the boom is supported by the cable attached to the wall, and the lower end is supported by a pivot on the same wall.
In this situation, we can start by considering the forces acting on the boom. The downward force of gravity acting on the boom is equal to the sum of the weight of the crate and the weight of the boom itself. This force acts at the center of mass of the boom. To maintain equilibrium, the tension in the cable must balance this downward force.
By summing the forces acting vertically, we can set up the equation: Tension - Weight of crate - Weight of boom = 0. The weight of the crate is given by the mass of the crate multiplied by the acceleration due to gravity (9.8 m/s^2). The weight of the boom is calculated similarly using its mass.
Solving the equation, we can find the tension in the cable by rearranging terms: Tension = Weight of crate + Weight of boom.
Learn more about equilibrium here:
https://brainly.com/question/30694482
#SPJ11
A rectangular loop of 270 turns is 31 cmcm wide and 17 cmcm
high.
Part A
What is the current in this loop if the maximum torque in a
field of 0.49 TT is 23 N⋅mN⋅m ?
The current in the rectangular loop is approximately 4.034 Amperes. To find the current in the rectangular loop, we can use the formula for the torque experienced by a current-carrying loop in a magnetic field:
Torque (τ) = N * B * A * I * sin(θ),
where:
τ is the torque,
N is the number of turns in the loop,
B is the magnetic field strength,
A is the area of the loop,
I is the current flowing through the loop,
θ is the angle between the magnetic field and the normal to the loop.
In this case, we are given the maximum torque (τ = 23 N⋅m), the number of turns (N = 270), the magnetic field strength (B = 0.49 T), and the dimensions of the loop (width = 31 cm, height = 17 cm).
First, we need to calculate the area of the loop:
A = width * height.
A = 31 cm * 17 cm.
Now, let's convert the area from square centimeters to square meters:
A = (31 cm * 17 cm) / (100 cm/m)².
Next, we can rearrange the torque formula to solve for the current (I):
I = τ / (N * B * A * sin(θ)).
Since we are not given the angle θ, we will assume it is 90 degrees (sin(90) = 1), which represents a perpendicular orientation between the magnetic field and the loop.
Substituting the given values:
I = 23 N⋅m / (270 * 0.49 T * A * 1).
Finally, substitute the calculated value for the loop's area:
I = 23 N⋅m / (270 * 0.49 T * (31 cm * 17 cm) / (100 cm/m)²).
Now, we can compute the current in the loop using the given values and perform the necessary calculations:
I ≈ 23 N⋅m / (270 * 0.49 T * (31 cm * 17 cm) / (100 cm/m)²).
I ≈ 4.034 A.
Therefore, the current in the rectangular loop is approximately 4.034 Amperes.
To know more about the torque
brainly.com/question/31323759
#SPJ11
In 10 years, Texas tripled its wind generating capacity such that wind power now is cheaper than coal here. Consider a simplified model of a wind turbine as 3 equally spaced, 115 ft rods rotating about their ends. Calculate the moment of inertia of the blades if the turbine mass is 926 lbs: ______
Calculate the work done by the wind if goes from rest to 25 rpm: _________ If the blades were instead 30 m, calculate what the angular speed of the blades would be (in rpm): _______
The moment of inertia of the blades of the wind turbine is 4.4 × 10⁹ in⁴. The work done by the wind is 3.13 × 10¹² in²/s². The angular speed of the blades would be 54.1 rpm.
The moment of inertia of the blades of a wind turbine, the work done by the wind, and the angular speed of the blades are to be determined.
1. The moment of inertia of the blades of a wind turbine:
The moment of inertia of the three equally spaced rods rotating about their ends is given by:
I = 3 × I₀
where I₀ is the moment of inertia of one rod. The moment of inertia of one rod is given by:
I₀ = (1/12)ML²
where M = 926 lbs and L = 115 ft = 1380 in.
Substituting the values, we have:
I₀ = (1/12)(926)(1380)² in⁴
Hence,
I = 3I₀ = 3(1/12)(926)(1380)² = 4.4 × 10⁹ in⁴
The moment of inertia of the blades of the wind turbine is 4.4 × 10⁹ in⁴.
2. The work done by the wind:
The work done is given by the formula:
W = (1/2)Iω²
where ω is the angular velocity and I is the moment of inertia. The initial angular velocity is 0, and the final angular velocity is 25 rpm, which is equal to (25/60) × 2π rad/s = 26.18 rad/s.
Substituting I and ω, we get:
W = (1/2)Iω² = (1/2)(4.4 × 10⁹)(26.18)² = 3.13 × 10¹² in²/s²
The work done by the wind is 3.13 × 10¹² in²/s².
3. The angular speed of the blades:
The moment of inertia of the blades is given by:
I = (1/12)ML²
where M = 926 lbs and L = 30 m = 1181.10 in.
Angular speed ω is given by:
ω = √(2W/I)
where W is the work done calculated above.
Substituting the values, we get:
ω = √[(2 × 3.13 × 10¹²)/(1/12)(926)(1181.10)²] = 54.1 rpm
The angular speed of the blades would be 54.1 rpm.
Learn more about moment of inertia: https://brainly.com/question/14460640
#SPJ11
This time we have a crate of mass 37.9 kg on an inclined surface, with a coefficient of kinetic friction 0.167. Instead of pushing on the crate, you let it slide down due to gravity. What must the angle of the incline be, in order for the crate to slide with an acceleration of 5.93 m/s^2?
64.5 degrees
34.6 degrees
46.1 degrees
23.1 degrees
The angle of the incline must be approximately 18.8 degrees for the crate to slide with an acceleration of 5.93 m/s^2.
When the crate slides down the inclined surface, there are two main forces acting on it: the gravitational force (mg) and the frictional force (μmg) due to kinetic friction. The component of the gravitational force parallel to the incline is mgsinθ, where θ is the angle of the incline. The equation of motion for the crate along the incline can be written as:
mgsinθ - μmg = ma,
where m is the mass of the crate, g is the acceleration due to gravity, μ is the coefficient of kinetic friction, and a is the acceleration of the crate.
Rearranging the equation, we get:
gsinθ - μg = a.
Substituting the given values, g = 9.8[tex]m/s^2[/tex], μ = 0.167, and a = 5.93 [tex]m/s^2[/tex], we can solve for θ:
9.8sinθ - 0.167 * 9.8 = 5.93.
Simplifying the equation and solving for θ, we find:
θ ≈ 18.8 degrees.
Therefore, the angle of the incline must be approximately 18.8 degrees for the crate to slide with an acceleration of 5.93 m/s^2.
Learn more about gravity here :
https://brainly.com/question/31321801
#SPJ11
The rotor of an electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis. The motor is used to change the orientation of the space probe in which it is mounted. The motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis. Calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis. Number __________ Units _________
The electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis and the motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis, then number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is Number 0.042 Units rev .
To calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis, we can use the concept of rotational motion and the relationship between angular displacement and rotational inertia.
The formula for the angular displacement (θ) in terms of rotational inertia (I) and the number of revolutions (N) is given by:
θ = 2πN
We want to find the number of revolutions N, so we can rearrange the formula as:
N = θ / (2π)
It is given that Angular displacement (θ) = 37.0° = 37.0 * (2π / 360) rad and Rotational inertia of the probe (lₚ) = 10.9 kg·m²
Substituting the values into the formula:
N = (37.0 * (2π / 360)) rad / (2π)
N = 0.042 revolutions.
Therefore, the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is approximately 0.042 revolutions.
To learn more about inertia: https://brainly.com/question/1140505
#SPJ11
Derive equation relating c (mass of cake deposited per unit volume of filtrate collected) and cF (mass of solids in feed slurry per unit volume of liquid)
The mass of cake deposited per unit volume of filtrate collected (c) and the mass of solids in feed slurry per unit volume of liquid (cF) are related by the filtration coefficient, K.
The relationship is given by the following equation:K = c/cFwhere K is the filtration coefficient, c is the mass of cake deposited per unit volume of filtrate collected, and cF is the mass of solids in feed slurry per unit volume of liquid.The filtration coefficient is a measure of the ability of a filter medium to remove solids from a feed slurry. It is an important parameter in the design and operation of filtration equipment.The filtration coefficient can be determined experimentally by measuring the mass of cake deposited per unit area of filter medium per unit time under specified conditions of pressure, temperature, and slurry concentration. The value of K depends on the properties of the filter medium, the properties of the slurry, and the operating conditions.
To know more about material visit:
https://brainly.com/question/21989520
#SPJ11
Explain how energy is transformed when you cook food on a stove.
Answer:
A stove top acts as a source of heat energy when it burns the gas. Anything which is placed above the stove also becomes a source of energy to cook things
Explanation:
hope you understand it
A sailboat heads out on the Pacific Ocean at 22.0 m/s [N 77.5° W]. Use a mathematical approach to find the north and the west components of the boat's velocity.
To find the north and west components of the boat's velocity, we can use trigonometry. The north component of the boat's velocity is approximately 21.52 m/s, and the west component is approximately 5.01 m/s.
Magnitude of velocity (speed): 22.0 m/s
Direction: N 77.5° W. To determine the north and west components, we can use the trigonometric relationships between angles and sides in a right triangle. Since the given direction is with respect to the west, we can consider the west component as the adjacent side and the north component as the opposite side.
Using trigonometric functions, we can calculate the north and west components as follows:
North component = magnitude of velocity * sin(angle)
North component = 22.0 m/s * sin(77.5°)
North component ≈ 21.52 m/s
West component = magnitude of velocity * cos(angle)
West component = 22.0 m/s * cos(77.5°)
West component ≈ 5.01 m/s
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
The only force acting on a 3.3 kg canister that is moving in an xy plane has a magnitude of 3.0 N. The canister initially has a velocity of 2.4 m/s in the positive x direction, and some time later has a velocity of 5.6 m/s in the positive y direction. How much work is done on the canister by the 3.0 N force during this time? Number ___________ Units _____________
The work done on the canister by the 3.0 N force during this time is 0 J (joules).
To calculate the work done on the canister by the 3.0 N force during this time, we need to find the displacement of the canister and the angle between the force and the displacement.
The mass of the canister (m) is 3.3 kg.
The magnitude of the force (F) is 3.0 N.
The initial velocity (v₁) is 2.4 m/s.
The final velocity (v₂) is 5.6 m/s.
The work done (W) by the force can be calculated using the formula:
W = F * d * cosθ
To find the displacement (d), we need to calculate the change in position of the canister. Since the canister moves from the positive x direction to the positive y direction, we can consider the displacement as the vector sum of the initial and final velocities:
d = √((Δx)² + (Δy)²)
Δx represents the difference or change in the x-coordinate (horizontal direction) of the canister's position, while Δy represents the difference or change in the y-coordinate (vertical direction) of the canister's position.
Δx = 0 (since the canister does not move in the x direction)
Δy = v₂ - v₁ = 5.6 m/s - 2.4 m/s = 3.2 m/s
By substituting the given values into the formula mentioned above, we can determine the work done on the canister by the 3.0 N force during this time.
d = √((0)² + (3.2)²) = √10.24 = 3.2 m
Now, we need to find the angle θ between the force and the displacement. Since the force is acting in the xy plane and the displacement is in the positive y direction, the angle θ is 90 degrees.
Cosine of 90 degrees is 0, so cosθ = 0.
Substituting the values into the work formula, we get:
W = 3.0 N * 3.2 m * cos90° = 0 J
Therefore, the work done on the canister by the 3.0 N force during this time is 0 J (joules).
Learn more about work done at: https://brainly.com/question/28356414
#SPJ11
What is the period if a wave with a wavelength of 4.25 cm travels at 5.46 cm/s? Answer to the hundredths place or two decimal places.
We can calculate the period by taking the reciprocal of the frequency: T = 1/f = 1/1.283 Hz = 0.78 s (rounded to two decimal places). Therefore, the period of the wave is 0.78 s.
The period of a wave is the time it takes for one complete cycle or wavelength to pass a given point. It is represented by the symbol T and is measured in seconds (s). The formula for calculating the period of a wave is T = 1/f, where f represents the frequency of the wave.
The speed of a wave is given by the equation: speed = wavelength * frequency. Rearranging this equation, we have: frequency = speed / wavelength.
The frequency of a wave represents the number of cycles per unit time. In this case, we want to find the period, which is the reciprocal of the frequency. So, the period is given by: period = 1 / frequency.
To find the frequency, we divide the speed (5.46 cm/s) by the wavelength (4.25 cm): frequency = 5.46 cm/s / 4.25 cm.
Now, we can calculate the period by taking the reciprocal of the frequency: period = 1 / (5.46 cm/s / 4.25 cm).
Evaluating this expression, we find the period of the wave to be approximately 0.778 seconds, rounded to the hundredths place or two decimal places.
Learn more about wave here:
https://brainly.com/question/25954805
#SPJ11
Determine the steady-state error for constant and ramp inputs to canonical systems with the following transfer functions: 2s+1 A) G(s) = = H(s) = s(s+1)(s+3)' 3s+1 S+3 3s+1 S-1 B) G(s) = = H(s) = s(s+1)' s(s+2)(2s+3)
For system A, the steady-state error for a constant input is zero and for a ramp input is infinity. For system B, the steady-state error for both constant and ramp inputs is zero.
For a constant input of value Kc, the steady-state error is given by:
ess = lim s→0 sE(s) = lim s→0 s(1/H(s))Kc = Kc/lim s→0 H(s)
For a ramp input of slope Kr, the steady-state error is given by:
ess = lim s→0 sE(s)/Kr = lim s→0 s(1/H(s))/(s^2/Kr) = 1/lim s→0 sH(s)
A) G(s) = 2s+1/(s+1)(s+3)(s), H(s) = 3s+1/(s+1)(s+3)(s)
For a constant input, Kc = 1. The transfer function has a pole at s = 0, so we have:
ess = Kc/lim s→0 H(s) = 1/lim s→0 (3s+1)/(s+1)(s+3)(s) = 0
Therefore, the steady-state error for a constant input is zero.
For a ramp input, Kr = 1. The transfer function has a pole at s = 0, so we have:
ess = 1/lim s→0 sH(s) = 1/lim s→0 s(3s+1)/(s+1)(s+3)(s) = ∞
Therefore, the steady-state error for a ramp input is infinity.
B) G(s) = (2s+1)/(s+1), H(s) = s(s+1)/(s+2)(2s+3)
For a constant input, Kc = 1. The transfer function has no pole at s = 0, so we have:
ess = Kc/lim s→0 H(s) = 1/lim s→0 s(s+1)/(s+2)(2s+3) = 0
Therefore, the steady-state error for a constant input is zero.
For a ramp input, Kr = 1. The transfer function has a pole at s = 0, so we have:
ess = 1/lim s→0 sH(s) = 1/lim s→0 s^2(s+1)/(s+2)(2s+3) = 0
Therefore, the steady-state error for a ramp input is zero.
To know more about steady-state error, visit:
brainly.com/question/31109861
#SPJ11
Assuming that the non-wetting angle is about 180 degrees, what is the surface tension of the gas/liquid interface to obtain the wetting state under the following conditions? Liquid/solid-phase interface tension 30 mN/m. Solid/gas- phase interface tension 8.7 mN/m
Substituting the given values:γL = γsL - γsV cosθ= 30 - 8.7 × cos 0= 30 mN/m. The surface tension of the gas/liquid interface needs to be 30 mN/m for wetting to occur. Therefore, the answer is 30 mN/m.
Wetting is the phenomenon of complete or partial liquid spreading over the surface of the solid. If the non-wetting angle is about 180 degrees, then the contact angle between the liquid and solid is zero, and wetting occurs. To calculate the surface tension of the gas/liquid interface for this to happen, the Young equation can be used:γsL = γsV + γL cosθWhere,γsL is the liquid/solid-phase interface tension,γsV is the solid/gas-phase interface tension,γL is the surface tension of the liquid, andθ is the contact angle.The contact angle θ is zero in this case. Substituting the given values:γL = γsL - γsV cosθ= 30 - 8.7 × cos 0= 30 mN/mThe surface tension of the gas/liquid interface needs to be 30 mN/m for wetting to occur. Therefore, the answer is 30 mN/m.
To know more about immiscible liquids visit:
https://brainly.com/question/31310196
#SPJ11
Galaxies in the universe generally have redshifted spectra. A student has read about a cluster galaxy with a blueshifted spectrum. They think it was a galaxy in either the Virgo cluster (at a distance of 20 Mpc from us) or in the Coma Cluster (at a distance of 90 Mpc from us). Estimate whether a blueshifted galaxy in the Virgo or Coma cluster is plausible.
The presence of a blueshifted spectrum in a galaxy within the Virgo or Coma cluster is examined to determine its plausibility.
In general, galaxies in the universe exhibit redshifted spectra, indicating that they are moving away from us due to the universe's expansion. However, the student has come across a cluster galaxy with a blueshifted spectrum, which seems unusual. We can consider the distances of the Virgo and Coma clusters from us to determine the plausibility of such a scenario.
The Virgo cluster is located at a distance of 20 Mpc (megaparsecs) from us, while the Coma Cluster is significantly farther away, at a distance of 90 Mpc. The observed blueshift indicates that the galaxy is moving towards us. Given that the blueshift is contrary to the general redshift trend, it suggests that the galaxy is relatively close to us.
Considering the distances involved, a blueshifted galaxy in the Virgo cluster (at 20 Mpc) is more plausible than one in the Coma Cluster (at 90 Mpc). The closer proximity of the Virgo cluster makes it more likely for a galaxy within it to exhibit a blue-shifted spectrum.
Learn more about redshifted here:
https://brainly.com/question/30257423
#SPJ11
11. A \( 30.0 \)-g bullet is fired from a gun and posssesses \( 1750 \mathrm{~J} \) of kinetic energy. Find its velocity.
Velocity of the bullet is 341.64 m/s.
Given,Mass of the bullet, m = 30.0 g = 0.03 kg Kinetic energy of the bullet, K.E = 1750 JWe know that,The kinetic energy of an object is given by the formula,K.E = (1/2) mv²where,m is the mass of the object,v is the velocity of the objectWe can write the above equation as,v = √(2K.E/m)Substituting the given values, we get,v = √(2 × 1750 / 0.03) = √(3500/0.03) = √116666.67 = 341.64 m/sTherefore, the velocity of the bullet is 341.64 m/s. Velocity of the bullet is 341.64 m/s.
To know more about bullet visit:
https://brainly.com/question/29231632
#SPJ11
The gravity on Mars is 3.7 m / s .s
Assume a Martian throws a 2 kg rock straight up into the air, it rises up 10 meters and then falls back to the ground,
How much kinetic energy did the ball have when it was 10 meters off the ground?
To calculate the kinetic energy of the rock when it is 10 meters off the ground, we need to consider its potential energy at that height and convert it into kinetic energy.
The potential energy of an object at a certain height can be calculated using the formula: PE = m * g * h,
In this case, the mass of the rock is 2 kg, and the height is 10 meters. The acceleration due to gravity on Mars is given as 3.7 m/s².
PE = 2 kg * 3.7 m/s² * 10 m.
Calculating this expression, we find the potential energy of the rock at 10 meters off the ground.
Since the rock is at its maximum height and has no other forms of energy all of the potential energy is converted into kinetic energy when it falls back to the ground.
Therefore, the kinetic energy of the rock when it is 10 meters off the ground is equal to the potential energy calculated above.
Learn more about kinetic energy here:
https://brainly.com/question/25959744
#SPJ11