The problem concerning an interesting effect observed with specific non-Newtonian fluids investigating the impact of shear stress on the flow behavior of non-Newtonian fluids.
In this experiment, a non-Newtonian fluid is placed in a cylindrical container and its flow behavior is observed when a shear stress is applied to its surface which is created by a rotating paddle wheel which is placed at the bottom of the container. The paddle wheel is rotated at different speeds to increase the shear stress applied to the non-Newtonian fluid.
The results of this experiment demonstrate that when the shear stress is increased, the viscosity of the non-Newtonian fluid decreases. This decrease in viscosity causes the non-Newtonian fluid to flow more easily and with less resistance. This effect can be seen when the paddle wheel is rotated at higher speeds; the non-Newtonian fluid flows more quickly and with less effort.
To learn more about Newtonian fluid click here https://brainly.com/question/30585128
#SPJ1
which of the following statements are correct? hint given in feedback select one or more: a. in an electron microscope, electrons behave as waves. b. waves have a very precise location. c. a neutron can behave as a wave. d. a bb (small 1-2 mm ball of copper) can behave as a wave.
The correct statements are: a. In an electron microscope, electrons behave as waves. b. Waves do not have a very precise location. c. A neutron can behave as a wave.
An explanation of each statement is given below:
a. In an electron microscope, electrons behave as waves. This statement is true. In an electron microscope, electrons are used to image very small objects. In this case, electrons behave as waves, which can be focused and directed to create images of the object.
b. Waves do not have a very precise location. This statement is also true. Waves exhibit a property known as wave-particle duality, meaning they can be both waves and particles. As particles, they have a specific location. However, as waves, they do not have a precise location but rather are spread out over a region.
c. A neutron can behave as a wave. This statement is also true. Neutrons are particles that can also exhibit wave-like behaviour. This wave-particle duality is a fundamental property of quantum mechanics, which describes the behaviour of particles on very small scales.
d. A BB (small 1-2 mm ball of copper) can behave as a wave. This statement is false. A BB is a macroscopic object, meaning it is large enough to be observed without a microscope. The wave-particle duality only applies to particles on very small scales, such as electrons or neutrons.
For more such questions on electron
brainly.com/question/9317875
#SPJ11
which of the following statements concerning this collision are correct? a. both vehicles are acted upon by the same average force during the collision. b. the small car is acted upon by a greater average force than the suv. c. the small car undergoes a greater change in momentum than the suv. d. both vehicles undergo the same change in momentum. which of the following statements concerning this collision are correct? a. both vehicles are acted upon by the same average force during the collision. b. the small car is acted upon by a greater average force than the suv. c. the small car undergoes a greater change in momentum than the suv. d. both vehicles undergo the same change in momentum. a a, d b, c b, d
The correct statements concerning this collision are:
Both vehicles are acted upon by the same average force during the collision.The small car undergoes a greater change in momentum than the SUV. Options A and C are correctIn a collision between two objects, the total momentum of the system is conserved. This means that the total momentum before the collision is equal to the total momentum after the collision. However, the kinetic energy of the system may not be conserved, as some of it may be lost to other forms of energy, such as heat, sound, or deformation of the objects involved.
When two vehicles collide, the total momentum of the system is conserved, but the kinetic energy of the system is not necessarily conserved. During the collision, both vehicles experience an equal and opposite average force, as required by Newton's Third Law of Motion. However, the change in momentum experienced by each vehicle depends on its mass and velocity before and after the collision. The small car will experience a greater change in momentum than the SUV because it has a smaller mass. Options A and C are correct
To know more about the Collision, here
https://brainly.com/question/16344573
#SPJ4
A starter cord for a generator is 1m long. It is wound on to a drum with a diameter of 10cm. A person starts pulling with a force of 100N. How much work does he do?
The person does 31.4 Joules of work when pulling the starter cord.
To calculate the work done by the person pulling the starter cord, we need to find the distance that the cord moves as it is pulled.
The circumference of the drum can be calculated as:
C = 2πr = 2 x 3.14 x 0.1m = 0.628m
So, each complete turn of the drum will wind or unwind the cord by a distance of 0.628m.
Assuming that the person pulls the cord with a constant force of 100N, the work done can be calculated as:
Work = Force x Distance
where distance is the length of cord pulled.
Since the cord is wound on the drum, the distance pulled will be equal to the length of the cord unwound from the drum.
Length of cord unwound = π x diameter of drum
= π x 10cm = 0.314m
Therefore, the work done by the person is:
Work = Force x Distance = 100N x 0.314m = 31.4 Joules (J)
Learn more about distance here:
https://brainly.com/question/15172156
#SPJ1
two monochromatic light sources can interfere constructively or destructively, depending on their phase difference. one consequence of this phenomenon is
One phenomenon that we see when two monochromatic light source interfere constructively or destructively is the colors that are observed on the surface of a soap bubble. So option A is correct.
Constructive interference is when two light waves overlap and combines to form a larger wave. Destructive interference is when the waves cancel each other. Constructive interference occurs when the waves are in phase with each other, and destructive occurs when they are out of phase.
A soap bubble will have an internal and an external surface. Both these surface reflects light that falls in it regardless of the source. When these two reflected waves constructively or destructively interfere, we could see colors on the surface even the light reflected by both surfaces are white.
So the correct answer is option A.
For more information regarding interference, kindly refer
https://brainly.com/question/22320785
#SPJ4
The complete question is
We have seen that two monochromatic light waves can interfere constructively or destructively, depending on their phase difference. One consequence of this phenomenon is
A) the colors you see when white light is reflected from a soap bubble.
B) the appearance of a mirage in the desert.
C) a rainbow.
D) the way in which Polaroid sunglasses work.
E) the formation of an image by a converging lens, such as the lens in your eye
from what height should a circular hoop of radius r be released on the same slope in order to equal the sphere's speed at the bottom?
To ensure that the speed of a circular hoop of radius r is equal to that of a sphere at the bottom, the hoop must be released from a height of r/2 above the sphere's release point.
Circular hoops are a set of steel or aluminum rings with an inner diameter of 16 inches, making them ideal for use with woven or braided nets. They are used to support the net and provide a framework for the ball to pass through. For balls up to 18 feet in diameter, we recommend a minimum of four hoops. The motion of rolling without slipping: The motion of rolling without slipping is the movement of an object without slipping.
Rolling without slipping is the motion of a circular object where there is a rolling motion of the object without slipping, meaning that the point on the outer edge of the circular object contacts the ground while rolling. The distance traveled by an object rolling without slipping can be calculated using the formula
S = Rθ
when it travels a distance θ with a radius R.
The answer to the question is that the circular hoop of radius r should be released from a height of r/2 above the sphere's release point in order to match the speed of the sphere at the bottom.
To learn more about Speed :
https://brainly.com/question/27888149
#SPJ11
im not sure what to write in the blanks.
Explanation:
meters per second
meters per second
seconds
A machine gun with a mass of 5kg fires a 50g bullet at a speed of 100m/s. what Is the recoil of the machine gun
Explanation:
Using conservation of momentum
the bullets momentum must equal the rifle's momnetum
5 000 gm * v = 50 gm * 100 m/s
v = 1 m/s
when will another full moon appear
Answer: Thursday, April 6, at 12:34 a.m.
Explanation:
in 1897, a refracting telescope was built at the yerkes observatory in williams bay, wisconsin. at the time it was the largest telescope in the world, and is actually used till this day. the telescope has an objective lens of 1 m diameter with the focal length of 19 m. what should the focal length of the eyepiece lens be to give a magnification of magnitude 250?
The focal length of the eyepiece lens should be 0.076 m to give a magnification of magnitude 250.According to the magnification formula, Magnification = focal length of the objective lens / focal length of the eyepiece lens.
Magnification = 250focal length of the objective lens = 19 m Magnification = focal length of the objective lens / focal length of the eyepiece lens.250 = 19 / focal length of the eyepiece lens Rearranging the above equation to get the focal length of the eyepiece lens: focal length of the eyepiece lens = 19 / 250focal length of the eyepiece lens = 0.076 m Therefore, the focal length of the eyepiece lens should be 0.076 m to give a magnification of magnitude 250.
To achieve a magnification of 250 with a telescope at Yerkes Observatory in Wisconsin, you can use the formula.
Learn more about here;
https://brainly.com/question/16188698
#SPJ4
describe how contacts associated with relays, timers, motor starts, and the like are represented on a ladder diagram.
In a ladder diagram, these symbols are organized into horizontal rungs, which represent parallel circuits, and vertical rails, which represent power supply lines.
In a ladder diagram, contacts associated with relays, timers, motor starters, and similar devices are represented using specific symbols and notations to show their function and status. Here's a step-by-step explanation of how they are represented:
1. Normally open (NO) contact: This is represented by two parallel lines, similar to an open switch. It indicates that the contact is open when the device (relay, timer, motor starter, etc.) is not energized. The symbol is (| |).
2. Normally closed (NC) contact: This is represented by two parallel lines with a diagonal line across them, similar to a closed switch. It indicates that the contact is closed when the device is not energized. The symbol is (|/|).
3. Relay coil: A relay coil is represented by a circle with the relay's identification (usually a letter and number) inside it. When the coil is energized, it causes the associated contacts to change their state (NO contacts close, NC contacts open).
4. Timer: Timers are represented by a square or rectangle with the timer's identification inside it, and sometimes the time delay setting. Timer contacts can be either normally open (| |) or normally closed (|/|), and their state will change after the specified time delay.
5. Motor starter: A motor starter is represented by a circle with an "M" inside it. Motor starters have both normally open and normally closed contacts, depending on the function (e.g., for starting or stopping the motor). The contacts are connected in series or parallel with the motor and other control devices.
In a ladder diagram, these symbols are organized into horizontal rungs, which represent parallel circuits, and vertical rails, which represent power supply lines. The diagram provides a clear and concise way to visualize the operation and interconnection of these devices in a control circuit.
For more such questions on ladder diagram , Visit:
https://brainly.com/question/30297090
#SPJ11
what are jet streams? what are jet streams? bands of low-speed wind found at elevations of 9-15 km bands of low-speed wind found at elevations of 5-9 km bands of high-speed wind found at elevations of 9-15 km bands of high-speed wind found at elevations of 5-9 km
Jet streams are bands of high-speed wind found at elevations of 9-15 km. This wind current, referred to as jet streams, is formed by a combination of atmospheric temperature, Earth's rotation, and pressure differences in the atmosphere.
What are jet streams, Jet streams are fast-flowing, narrow air currents located in the upper atmosphere or the troposphere, generally around 8 to 9 miles high in the Earth's atmosphere.
They are formed due to the combination of the Earth's rotation, temperature, and atmospheric pressure.The temperature of the air in the atmosphere decreases with increasing altitude. Because the Earth's rotation is faster at the equator than at the poles, the temperature difference causes high-altitude air to flow from west to east, resulting in a jet stream.
The band of high-speed wind called the jet stream can influence the weather in the areas they pass over. They push high and low-pressure systems around, affecting weather patterns. Jet streams are caused by differences in atmospheric pressure, Earth's rotation, and atmospheric temperature.
For more such questions on Jet streams
brainly.com/question/24873179
#SPJ11
a long, straight wire with current flowing through it produces magnetic field strength at its surface. if the wire has a radius r, where within the wire is the field strength equal to of the field strength at the surface of the wire? assume that the current density is uniform throughout the wire. a) 0.36 r b) 0.060 r c) 0.64 r d) 0.030 r
The answer to this question is 0.64 r (option c).To calculate the magnetic field inside the wire, we can use Ampere's Law.
Calculation of magnetic field:The magnetic field can be calculated by
1: Calculate the magnetic field strength at the surface using Ampere's Law for a long, straight wire.
2: Find the equation for the magnetic field strength at a distance x from the center of the wire.
3: Equate the magnetic field strength at distance x to half the magnetic field strength at the surface.
4: Solve for x in terms of the wire's radius r.
The answer is x = 0.64 r, which corresponds to option c) 0.64 r.
You can learn more about the magnetic field at: brainly.com/question/23096032
#SPJ11
Select the correct term to complete the sentences. fluorescence translucent object
RGB color model
visible light index of refraction nanometer white light rod cell
transparent
pixel
color
cone cell
converging lens
prism
specular reflection electromagnetic spectrum
CMYK incandescence photon diffuse reflection electromagnetic wave diverging lens photoreceptor lens mirror
Section 25.1
1. contains an equal mix of all colors.
2. You can use light produced by to heat food.
3. Atoms produce light by
4. A(n) travels at the speed of light.
5. A light wave at 500 THz is the orange.
6. You see all the colors of when you see a rainbow.
7. Light wavelengths are measured in _(s).
8. Ultraviolet light and microwaves are part of the
9. A(n) is the smallest possible amount of light.
Section 25.2
10. A(n) specializes in detecting color.
11. A(n) specializes in detecting light intensity.
12. The human eye has about 137 million _
13. An HDTV screen has more_than an ordinary TV screen.
14. Magenta is a pigment used in the color model.
15. The is used by video cameras to achieve a range
of colors.
Section 25.3
16. A surface with
produces a single beam of reflected light rays.
17. occurs when light enters a material and bends.
18. Three examples of optical devices are…. And….
19. Glass is a(n) material because light passes through it without scattering.
20. materials allow light to pass but scatter it in all directions.
21. The of water is 1.33.
22. Surfaces that scatter light when it reflects have
23. A(n) … bends light rays inward toward the focal point.
24. A(n) ….bends light rays outward away from the
focal point.
Section 25.1: 1.) white light, 2.)incandescence, 3.) emitting photons , 4.) photon, 5.) orange, 6.) visible light, 7.) nanometers, 8.) electromagnetic spectrum, 9.) photon
What is rod cells?Rods are the type of photoreceptor cell in retina and are sensitive to light levels and help give us good vision in low light.
Section 25.2
10. Cone cell specializes in detecting color.
11. Rod cell specializes in detecting light intensity
12. Human eye has 137 million : photoreceptors.
13. An HDTV screen has more than an ordinary TV screen : pixels
14. Magenta is a pigment used in the color model : CMYK
15. The is used by video cameras to achieve a range of colors : RGB color model
Section 25.3
16. A surface with produces a single beam of reflected light rays : specular reflection
17. occurs when light enters a material and bends : Refraction
18. Three examples of optical devices are converging lens, diverging lens and prism.
19. Glass is transparent material because light passes through it without scattering.
20. Materials that allow light to pass but scatter it in all directions : translucent
21. The index of refraction of water is 1.33
22. Surfaces that scatter light when it reflects have : rough surfaces
23. Converging lens bends light rays inward toward the focal point
24. Diverging lens bends light rays outward away from the focal point.
To know more about rod cells, refer
https://brainly.com/question/30902347
#SPJ1
the actual connecting or transmission medium that carries the message in a communication system is called the
The actual connecting or transmission medium that carries the message in a communication system is called the communication channel.
The channel is responsible for conveying information from the sender (source) to the receiver (destination) effectively and accurately. These channels can be either wired or wireless, depending on the type of communication system being used.
Examples of communication channels include:
1. Copper wires: Commonly used in traditional telephone systems and Ethernet cables.
2. Fiber-optic cables: Offer high-speed data transmission and are used for internet connections, television signals, and more.
3. Radio waves: Enable wireless communication for devices like mobile phones, radios, and Wi-Fi routers.
4. Infrared: Used for short-range communication, such as remote controls and wireless keyboards.
5. Satellite: Allows for global communication and data transmission, especially in remote areas.
To learn more about Communication :
https://brainly.com/question/30866222
#SPJ11
You have two capacitors in series, C1 = 300 nF = 300x10-'F and C2 100 nF = 100x10-'F, and you connect them in series to a 1000-2 (ohm) resistor. What is the time constant of this RC circuit?
The time constant of the RC circuit with two capacitors in series and a 1000 Ω resistor is 0.75 seconds.
When answering questions on the Brainly platform, it is important to always be factually accurate, professional, and friendly. Answers should be concise and not provide extraneous amounts of detail. It is also important to address all relevant parts of the question and avoid ignoring any typos or irrelevant information.
In regards to the provided student question, here is an answer:In order to determine the time constant of the RC circuit that has two capacitors in series, we must first use the formula for the equivalent capacitance of a series circuit,
which is given by 1/Ceq = 1/C1 + 1/C2, where Ceq represents the equivalent capacitance of the circuit, C1 represents the capacitance of the first capacitor, and C2 represents the capacitance of the second capacitor.Using this formula,
we can calculate the equivalent capacitance of the circuit as follows:1/Ceq = 1/300x10^-9 + 1/100x10^-9 = (100x10^-9 + 300x10^-9) / (100x10^-9 x 300x10^-9) = 4/3 x 10^-9Ceq = 3/4 x 10^9 FNow that we have the equivalent capacitance of the circuit,
we can use the formula for the time constant of an RC circuit, which is given by RC, where R represents the resistance of the circuit and C represents the capacitance of the circuit.Using the given resistance of 1000 Ω and the calculated equivalent capacitance of 3/4 x 10^9 F,
we can calculate the time constant of the circuit as follows:RC = 1000 Ω x 3/4 x 10^9 F = 0.75 s
To learn more about : circuit
https://brainly.com/question/2969220
#SPJ11
the big bang theory suggests that the universe formed as a result of the sudden expansion of a singularity. what observations about galaxies in the universe provide support for this suggestion?
One of the most compelling pieces of evidence is the cosmic microwave background radiation (CMB), which is a faint glow of electromagnetic radiation that fills the entire universe.
This radiation is thought to be the afterglow of the Big Bang and is consistent with the predictions of the theory. Additionally, observations of the distribution and movement of galaxies in the universe suggest that the universe is expanding. Finally, the observed abundance of light elements in the universe, such as hydrogen and helium, is also consistent with the predictions of the Big Bang theory. Together, these observations provide strong evidence that the universe began with a sudden expansion from a singularity.
To know more about Big Bang theory, here
brainly.com/question/1160650
#SPJ4
Can someone help me with this please!!!
Answer:
B. 10 m
Explanation:
f = v/λ = (20 m/s)λ / (5 m) = 4 Hz original frequency
1/2(4 Hz) = 2 Hz half the original frequency
(20 m/s) / λ = 2 Hz
λ = (20 m/s) / (2 Hz) = 10 m
The second wavelength would increase to 10 m
A light bounces off the surface of a metal cup and shines in Harold’s eyes. Which best describes what is happening to the light waves in this scenario
When a light bounces off the surface of a metal cup and shines in Harold's eyes, the light waves undergo reflection. Reflection occurs when a wave encounters a boundary between two media and bounces back into the original medium.
When a light wave strikes the surface of the metal cup, some of the energy from the light is absorbed by the metal, causing electrons in the metal to become excited and move to higher energy levels. These excited electrons then release the energy they have absorbed by emitting new light waves, in a process called reflection. The reflected light waves bounce off the surface of the metal cup in many different directions, including towards Harold's eyes. When these waves enter Harold's eyes, they stimulate the cells in his retina, which sends electrical signals to his brain. His brain then processes these signals as visual information, allowing him to see the cup and the reflected light.
Learn more about reflection here:
https://brainly.com/question/30270479
#SPJ1
what is the magnitude of the force per meter of length on a straight wire carrying an 8.50- a current when perpendicular to a 0.75- t uniform magnetic field?
The magnitude of the force per meter of length on the wire is 6.375 N/m when the wire is carrying an 8.50-A current perpendicular to a 0.75-T uniform magnetic field.
The magnitude of the force per meter of length on a straight wire carrying an 8.50-A current when perpendicular to a 0.75-T uniform magnetic field can be calculated using the formula F = BIL, where F is the magnitude of the force, B is the magnetic field strength, I is current, and L is the length of the wire.
Substituting the given values, we get:
F = (0.75 T) x (8.50 A) x 1 m
F = 6.375 N/m
This force is known as the Lorentz force, which describes the force experienced by a charged particle, such as an electron when moving in a magnetic field. In this case, the moving charges are the electrons in the wire, and the magnetic field causes them to experience a force perpendicular to their direction of motion.
This force can be used in various applications, such as electric motors and generators, where the motion of electrons in a magnetic field is utilized to produce mechanical work or generate electricity.
To learn more about uniform magnetic fields
https://brainly.com/question/15306248
#SPJ4
a worker aciddentally kicks a rock off of a roof of a 5m tall building at 2 m/s. what is the distance (range) x from the edge of the building where the rock will land?
Answer:
We can use the equations of motion to find the horizontal distance (range) x from the edge of the building where the rock will land. The vertical motion of the rock is governed by the acceleration due to gravity, which is constant and equal to 9.81 m/s^2.
First, we can find the time it takes for the rock to hit the ground using the vertical motion equation:
y = vi*t + (1/2)at^2where y is the initial height of the rock (5 m), vi is the initial vertical velocity of the rock (0 m/s), a is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the rock to hit the ground.
Solving for t, we get:
t = sqrt((2*y)/a) = sqrt((2*5)/9.81) = 1.02 s
Now we can find the horizontal distance (range) x from the edge of the building using the horizontal motion equation:
x = vx*t
where vx is the horizontal velocity of the rock, which is constant and equal to 2 m/s.
Substituting the values we have, we get:
x = 2 m/s * 1.02 s = 2.04 mTherefore, the distance (range) x from the edge of the building where the rock will land is 2.04 meters.
a parallel-plate capacitor is connected to a battery. what happens if the plate separation is doubled while the capacitor remains connected to the battery? (a) the stored energy remains the same. (b) the stored energy is doubled. (c) the stored energy decreases by a factor of 2. (d) the stored energy decreases by a factor of 4. (e) the stored energy increases by a factor of 4.
When a parallel-plate capacitor is connected to a battery, if the plate separation is doubled the stored energy decreases by a factor of 2 while the capacitor remains connected to the battery. The correct option is (c)
The stored energy in a capacitor can be computed from the amount of charge stored on the plates and the voltage difference between them.
It is given by the formula E=½QV, where E is the energy, Q is the charge, and V is the voltage between the plates.
A capacitor stores energy in its electric field, which is created by the charge distribution on its plates.
When the plate separation is increased while the capacitor is connected to a battery, the electric field inside the capacitor decreases since the voltage across it is constant. This results in a reduced potential energy, as well as a decrease in stored energy.
As a result, the stored energy of the capacitor is reduced by a factor of 2 when the plate separation is doubled, as the electric field in the capacitor decreases by half. Therefore,option (c) is correct.
For more such questions on capacitor, click on:
https://brainly.com/question/13578522
#SPJ11
if a violin string vibrates at 400 hz as its fundamental frequency, what are the frequencies of the first four harmonics?
The first four harmonics of a violin string vibrating at 400 Hz are 400 Hz, 800 Hz, 1200 Hz, and 1600 Hz, with each harmonic having a frequency that is a multiple of the fundamental frequency.
The first four harmonics of a violin string, which has a fundamental frequency of 400 Hz, can be computed as follows: The basic frequency, 400 Hz, is represented by the first harmonic, where n = 1. The frequency of the second harmonic (n = 2) is two times that of the main frequency. Consequently, the second harmonic's frequency is: 400 Hz + 2 f1 = 2 = 800 Hz The frequency of the third harmonic (n = 3) is three times that of the main frequency. Consequently, the third harmonic's frequency is: 400 Hz + 3 f1 = 3 = 1200 Hz The frequency of the fourth harmonic (n = 4) is four times that of the main frequency. Consequently, the fourth harmonic's frequency.
Learn more about harmonics here:
https://brainly.com/question/30198365
#SPJ4
if two objects each carrying a charge of 1 coulomb were placed 1 meter apart, how much force would they exert on each other? group of answer choices 106 n 9 n zero 1 n 9 x 109 n
Answer:
F = 9×10⁹ N
Explanation:
Coulomb's Law, k = 8.98755×10⁹Nm²/C² , q₁ = 1C , q₂ = 1C, r = 1m[tex]F=k\frac{q_1q_2}{r^2} \\\\F=(8.98755*10^9 Nm^2/C^2)*\frac{(1C)(1C)}{(1m)^2} \\\F = 9*10^9 N[/tex]
The force between the two objects is approximately [tex]9 * 10^9[/tex] N. So, the last option is accurate
Coulomb's law is an important principle in physics. It states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
To find the force between two charged objects, we can use Coulomb's Law, which states:
[tex]F =k *\frac{ (q1 * q2)}{r^2}[/tex]
Where F is the force, k is Coulomb's constant ([tex]8.99 * 10^9 N m^2/C^2[/tex]), q₁ and q₂ are the charges of the objects, and r is the distance between them. In this case, q₁ = q₂ = 1 C (coulomb) and r = 1 m (meter). Plugging these values into the equation:
[tex]F = \frac{(8.99 * 10^9) * (1 * 1) }{ (1)^2}[/tex]
[tex]F = 8.99 * 10^9 N[/tex].
The force is attractive when the charges are opposite (one negative and one positive), and the force is repulsive when the charges are the same (both negative or both positive).
To know more about Coulomb's law
brainly.com/question/506926
#SPJ11
What quantity in moles of LiBr are in 77.0 grams of LiBr?
Using stoichiometry, use the conversion factor of 1 mol/molar mass of LiBr
Molar mass of Li = 6.941 g
Molar mass of Br = 79.904 g
Molar mass of LiBr = 6.941 g + 79.904 g
Molar mass of LiBr = 86.845 g
[tex]77.0 g LiBr(\frac{1 mol LiBr}{86.845g LiBr})\\\\0.886637112096[/tex]
There are 0.886637112096 moles of LiBr in 77.0 grams of LiBr.
The molecular mass of Lithium Bromide (LiBr) is found by adding the atomic masses of Lithium and Bromide. Given a mass of 77.0 grams of LiBr, by converting this to moles using the molecular mass, we find there are 0.887 moles of LiBr.
Explanation:The process to solve this involves finding the molecular mass of Lithium Bromide (LiBr), which allows us to convert grams to moles. The atomic mass of Lithium (Li) is approximately 6.94 g/mol, and Bromide (Br) is 79.9 g/mol. Hence, the molecular mass of LiBr = 6.94 g/mol + 79.9 g/mol = 86.84 g/mol.
To calculate the quantity of moles, we use the formula: Moles = mass (grams) / molecular weight (g/mol). Given a mass of 77.0 grams, the quantity in moles = 77.0 g / 86.84 g/mol = approximately 0.887 moles of LiBr.
Learn more about Moles here:https://brainly.com/question/34302357
#SPJ2
how does a diode behave in a circuit? include how the behavior is different for positive and negative voltages
A diode is an electronic component that allows current to flow in one direction and blocks it in the opposite direction.
A diode is a semiconductor device that allows current to flow in only one direction. When the voltage across the diode is positive (forward bias), the diode conducts current easily and has a very low resistance, allowing current to flow through the diode. However, when the voltage across the diode is negative (reverse bias), the diode has a very high resistance and will not conduct any significant current.
In practical circuits, the diode is often used as a rectifier, allowing current to flow in one direction and blocking current in the opposite direction. In forward bias, the diode acts as a closed switch, allowing current to flow freely in the forward direction. In reverse bias, the diode acts as an open switch, blocking any current flow in the reverse direction.
To know more about diode, here
brainly.com/question/14988926
#SPJ4
from the diameter and effective surface temperature of the sun, estimate the rate at which it emits energy. what fraction of this emitted energy is intercepted by the earth? estimate the solar constant, given the mean earth-sun distance
The rate at which the Sun emits energy is calculated using P = σ * A * T⁴. The fraction of emitted energy intercepted by Earth is (π * R_earth²) / (4 * π * R_earth-sun²). The solar constant is P * Fraction.
Step 1: Use the Stefan-Boltzmann Law
The Stefan-Boltzmann Law states that the power (energy emitted per unit time) of a blackbody is given by:
P = σ * A * T⁴
where P is the power, σ is the Stefan-Boltzmann constant (5.67 x 10⁻⁸ W/m²K⁴), A is the surface area, and T is the effective surface temperature.
Step 2: Calculate the surface area of the Sun
The surface area of a sphere is given by:
A = 4 * π * R²
where R is the radius. Since the diameter is given, we can find the radius as half of the diameter:
R = diameter / 2
Step 3: Calculate the power emitted by the Sun
Using the surface area and temperature, calculate the power:
P = σ * A * T⁴
Step 4: Calculate the fraction of emitted energy intercepted by Earth
The fraction of emitted energy intercepted by Earth can be found by calculating the ratio of the cross-sectional area of Earth to the surface area of a sphere with a radius equal to the Earth-Sun distance.
Fraction = (π * R_earth²) / (4 * π * R_earth-sun²)
Step 5: Estimate the solar constant
The solar constant is the amount of solar energy received per unit area at the mean Earth-Sun distance. It can be calculated using the power emitted by the Sun and the fraction of emitted energy intercepted by Earth:
Solar constant = P * Fraction
By following these steps, you can estimate the rate at which the Sun emits energy, the fraction of emitted energy intercepted by Earth, and the solar constant, given the diameter and effective surface temperature of the Sun and the mean Earth-Sun distance.
Know more about energy here:
https://brainly.com/question/30672627
#SPJ11
I NEED HELP ASAP
Which of the following best explains how the location of the fossils provides evidence of continental plate movement?
A.
Fossil evidence suggests that South America and Africa were once joined together in one land mass.
B.
Fossil evidence suggests that South America and Africa were never joined together in one land mass.
C.
Fossil evidence suggests that South America and Africa are currently one land mass with the Atlantic Ocean covering part of the continent.
D.
Fossil evidence cannot be used as evidence of continental plate movement.
According to fossil evidence, South America and Africa were formerly part of a single geographical mass.
Which two fossils provide evidence in favour of continental drift?The eastern Greenland and Appalachian mountain ranges' similarity is scientists evidence for the theory of continental drift. In rocks that are the same age but on continents that are currently far apart, ancient fossils of the same species of extinct plants and animals can be found.s.
What evidence demonstrates the historical ties between South America and Africa?The most convincing proof, in his opinion, that the two continents were formerly connected is the existence of identical fossil species along the coasts of South America and Africa.
To know more about scientists visit:-
https://brainly.com/question/30633452
#SPJ1
light from a laser of wavelength 780 nm falls on a diffraction grating containing 3300 lines per centimeter. what are the angles of the principle maxima?
The required angle of principle maxima when wavelength and diffraction grating are given is calculated to be 15.07°.
The wavelength is given as 780 nm = 780 × 10⁻⁹ m
It is given that the diffraction grating contains 3300 lines per centimetre.
Distance between the slits d = 1 cm/3300 lines = 10⁻² m/3300 lines = 3×10⁻⁶ m
The angles of principle maxima are to be found out.
We know that,
d sin θ = m λ
where,
d is the distance between slits
θ is the angle with respect to the path of the incident light
m is the order of interference
sin θ = m λ/d
θ = sin⁻¹(m λ/d) = sin⁻¹[(1× 780 × 10⁻⁹)/(3×10⁻⁶)] = sin⁻¹ (26× 10⁻²) = sin⁻¹(0.26) = 15.07°
To know more about light:
https://brainly.com/question/13148969
#SPJ4
a 10-volt power supply is placed in series with two 5-ohm resistors. what is the current in the circuit after it passes through each of the two resistors?(1 point)
The current in the circuit after passing through each 5-ohm resistor is 1 Ampere, using Ohm's Law.
To compute the ongoing in the circuit, we can utilize Ohm's Regulation, which expresses that the ongoing moving through a circuit is straightforwardly corresponding to the voltage and contrarily relative to the opposition.The all out opposition of the circuit is equivalent to the amount of the singular protections in series, which is 5 ohms + 5 ohms = 10 ohms.Utilizing Ohm's Regulation, we can compute the ongoing in the circuit as follows:
I = V/R
Where I is the current, V is the voltage, and R is the opposition.Subbing the qualities, we get:
I = 10 V/10 ohms = 1 Ampere
Subsequently, the ongoing in the circuit after it goes through every one of the two 5-ohm resistors is 1 Ampere.
To learn more about resistors, refer:
https://brainly.com/question/22079799
#SPJ4
a cart with mass 390 g moving on a frictionless linear air track at an initial speed of 1.6 m/s undergoes an elastic collision with an initially stationary cart of unknown mass. after the collision, the first cart continues in its original direction at 1.0 m/s. (a) what is the mass of the second cart? (b) what is its speed after impact? (c) what is the speed of the two-cart center of mass?
Let m1 = 390 g be the mass of the first cart and m2 be the mass of the second cart. Since the collision is elastic, linear momentum is conserved.
Using the equation:m1v1i + m2v2i = m1v1f + m2v2fwhere v1i = 1.6 m/s, v1f = 1.0 m/s, and v2f = 0 (since the second cart is initially stationary), we get:m2 = (m1v1i - m1v1f) / v2i m2 = 390 × (1.6 - 1.0) / 0 m2 = 624 g The mass of the second cart is 624 g.(b) Using the same equation as in (a), we can solve for v2i:v2i = (m1v1i - m1v1f) / m2 v2i = (390 × 1.6 - 390 × 1.0) / 624 v2i = 0.429 m/sThe speed of the second cart after impact is 0.429 m/s.(c) The total momentum of the system is conserved in an elastic collision, so the velocity of the centre of mass (CM) of the two carts does not change. Therefore, the speed of the two-cart centre of mass is the same before and after the collision. We can use the formula:vCM = (m1v1 + m2v2) / (m1 + m2)where v1 = 1.6 m/s, v2 = 0.429 m/s, m1 = 390 g, and m2 = 624 g. The speed of the two-cart center of mass is:vCM = (390 × 1.6 + 624 × 0.429) / (390 + 624) vCM = 1.17 m/sThe speed of the two-cart center of mass is 1.17 m/s.
Learn more about momentum here:
https://brainly.com/question/17166755
#SPJ11