Sulfur dioxide decomposition's balanced chemical equation is 2 SO2(g) 2 S(s) + 3 O2 (g). 200.00 g of solid sulphur would result from 25.0 g of sulphur dioxide.
How much aluminium will react with 25 grammes of oxygen gas?In order to compute the mass of oxygen that will react or the mass of 02 that will react with aluminium, multiply the molar mass of oxygen molecules, 0.69 mol two, by 32 g per mole. Hence, the answer is that 25 g of aluminium and 22.22 g of cobalt will react.
First, we must determine how many moles of sulphur dioxide are contained in 25.0 g:
Number of moles of SO2 = mass / molar mass
Number of moles of SO2 = 25.0 g / 64.06 g/mol (molar mass of SO2)
Number of moles of SO2 = 0.3904 mol
The number of moles of sulphur produced can then be calculated using the mole ratio between sulphur dioxide and sulphur:
Number of moles of S = 2 x number of moles of SO2
Number of moles of S = 2 x 0.3904 mol
Number of moles of S = 0.7808 mol
Lastly, we may convert the amount of moles to grammes using the molar mass of sulphur:
Mass of S = number of moles x molar mass
Mass of S = 0.7808 mol x 256.53 g/mol (molar mass of S8)
Mass of S = 200.00 g (rounded to two decimal places)
To know more about Sulfur dioxide visit:-
https://brainly.com/question/31142164
#SPJ1
given a gas is 3 L and 3 mol, what is the number of moles of the gas when volume changes to 15 L?
The ideal gas law can be used to solve this issue:
PV = nRT
where R is the universal gas constant, n is the number of moles, P is the gas's pressure, V is its volume, and T is its temperature.
The following expression can be used to link the starting and final volumes and moles under the assumption that the gas's pressure and temperature don't change:
V1 / n1 = V2 / n2
where V1 and n1 represent the volume and number of moles at the beginning, and V2 and n2 represent the volume and number of moles at the end.
Inputting the specified values results in:
15 L/n2 = 3 L / 3 mol
When we simplify and account for n2, we obtain:
n2 = 3 mol (15 L / 3 L)
n2 = 15
As a result, 15 mol of the gas are present when the volume is changed to 15 L.
How do you calculate the amount of gas in a volume in moles?Using the equation V = nV m, where V is the volume in liters, n is the amount of gas in moles, and V m is the molar gas volume in liters per mole, is another technique to determine the solution. We may substitute the volume and molar gas volume from the question into this equation.
To know more about moles visit:-
brainly.com/question/26416088
#SPJ9
7. Calculate the half-life of an isotope if its activity falls from 1600 counts per second to 400 counts per second after 60 days.
7. How many grams of potassium dichromate would have 7.44 x 10^25 atoms of oxygen?
Answer:
simplified-74400000000000000000000000x
Explanation:
An ideal gas (at STP) has a volume of 5 L, how many moles of the gas are present?
Answer:
At STP (standard temperature and pressure), the conditions are:
Temperature (T) = 273.15 K
Pressure (P) = 1 atm = 101.3 kPa
Volume (V) = 22.4 L (for one mole of gas)
So, for a gas at STP with a volume of 5 L, we can use the following formula to calculate the number of moles present:
n = V / Vm
where:
n = number of moles
V = volume of gas (in liters)
Vm = molar volume of gas at STP (22.4 L/mol)
Plugging in the values, we get:
n = 5 L / 22.4 L/mol
n = 0.2232 mol (rounded to four significant figures)
Therefore, there are approximately 0.2232 moles of the gas present.
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
what are potential sources of error in rate of reaction lab with hcl and calcium carbonate?
Answer:
human error , random error .
87 electrons are found in an ion with Z = 89. Write its symbol.
The symbol of the ion is U 2+
U represents the element uranium, and
the superscript 2+ indicates that charge
What is atomic number (Z)?The atomic number (Z) of an element represents the number of protons found in the nucleus of an atom. In a neutral atom, the number of electrons is equal to the number of protons. However, in an ion, the number of electrons can differ from the number of protons.
To find the symbol for an ion with 87 electrons and a Z of 89, we need to determine the charge on the ion. The charge on an ion is equal to the difference between the number of protons and the number of electrons. In this case, we have:
charge = Z - number of electrons
charge = 89 - 87
charge = +2
Therefore, the ion has a charge of +2. The symbol for this ion can be written as follows:
U 2+
Learn more about electrons at:
https://brainly.com/question/860094
#SPJ1
Na2CO3(s)+2HNO3(aq) complete and balance the reaction.
Answer: Na2CO3 + 2 HNO3 → 2 NaNO3 + H2O + CO2
Explanation:
Copper and Silver Nitrate Lab The purpose of this experiment is to observe the chemical reaction between copper wire and silver nitrate and to record the stoichiometric relationship between the reactants and the products in this reaction
Answer questions below:
1a) What are some possible explanations for why you could have a percent yield less than 100% in this lab?
1b) What are some possible explanations for why you could have a percent yield higher than 100% in this lab?
assume that the product was dry for 1a
Because it demonstrated how the atoms of copper and silver were changed by oxidation and reduction, the experiment achieved its goal. The presence of a specific halogen in a presumed halogenoalkane can be determined using silver nitrate solution.
What does the term "stoichiometric" mean?Calculating the products and reactants of a chemical process is what we mean by stoichiometry. Numbers are essentially its main focus. When using balanced formulas to determine the proportions of reactants and products, stoichiometry is a key concept in chemistry.
The name "stoichiometric" refers to what?The study of quantifiable correlations found in chemical equations and reactions is known as stoichiometry. The terms stoicheion, which means element, and metron, which means measure, are the origins of the name.
To know more about Stoichiometric visit:
https://brainly.com/question/29856106
#SPJ1
How many grams of H₂0 will be produced if 195.9 grams of Fe
are produced?
O a. 16
O b. 84
O c. 180
O d. 810
Fe3O4 + H₂ → Fe + H₂O
The mass of the water that is going to be produced from the balanced reaction equation is 84 g.
What is the stoichiometry?Stoichiometry is the branch of chemistry that deals with the quantitative relationship between the reactants and products in a chemical reaction. It involves the calculation of the amounts of reactants needed to produce a certain amount of product, or the amount of product produced from a given amount of reactants.
Number of moles of Fe = 195.9 g/56 g/mol
= 3.5 moles
If 3 moles of Fe is produced when 4 moles of water is produced
3.5 moles of Fe is produced when 3.5 * 4/3
= 4.7 moles
Now we have that the mas of water is;
4.7 moles * 18 g/mol
= 84 g
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
CAN SOMEONE HELP WITH THIS QUESTION?
The minimum mass of hydrochloric acid that could be left over by the chemical reaction is 18.23 g.
What is moles?Moles in chemistry is a unit of measurement for the amount of a substance. It is equal to the number of atoms or molecules in a given mass of a substance, and is represented by the symbol ‘mol’. The molar mass of a substance is the mass of one mole of that substance, expressed in grams. It is important for calculating the amount of energy or reactants needed for a reaction. Moles can also be used to measure the concentration of a solution.
The minimum mass of hydrochloric acid that could be left over by this chemical reaction can be calculated using the following equation:
Moles of HCl = Mass HCl / Molar Mass HCl
Moles of NaOH = Mass NaOH / Molar Mass NaOH
Moles of HCl must equal moles of NaOH in the reaction, so:
Moles HCl = Moles NaOH
Mass HCl / Molar Mass HCl = Mass NaOH / Molar Mass NaOH
Rearranging for mass HCl:
Mass HCl = Molar Mass HCl x Mass NaOH / Molar Mass NaOH
Given:
Mass HCl = 28.8 g
Molar Mass HCl = 36.46 g/mol
Mass NaOH = 20.0 g
Molar Mass NaOH = 40.0 g/mol
Substituting values:
Mass HCl = 36.46 g/mol x 20.0 g / 40.0 g/mol
Mass HCl = 18.23 g
Therefore, the minimum mass of hydrochloric acid that could be left over by the chemical reaction is 18.23 g.
To know more about moles click-
https://brainly.com/question/15356425
#SPJ1
On a spring morning (20C) you fill your tires to a pressure of 2.25 atmospheres. As you ride along, the tire heats up to 45C from the friction on the road. What is the pressure in your tires now?
Assuming the volume of the tire remains constant, we can use the ideal gas law to determine the pressure of the tire at the higher temperature:
P1/T1 = P2/T2
where P1 is the initial pressure, T1 is the initial temperature, P2 is the final pressure (what we're trying to find), and T2 is the final temperature.
Converting the temperatures to Kelvin (as the ideal gas law requires temperatures in Kelvin), we have:
P1/T1 = P2/T2
P1 = 2.25 atm
T1 = 20 + 273.15 = 293.15 K
T2 = 45 + 273.15 = 318.15 K
Solving for P2, we get:
P2 = P1(T2/T1)
P2 = 2.25 atm (318.15 K / 293.15 K)
P2 = 2.44 atm (rounded to two significant figures)
Therefore, the pressure in your tires at 45°C would be approximately 2.44 atm.
State two conditions for the reaction in C2H4 +H2O = CH3CH2OH
The reaction between C2H4 (ethylene) and H2O (water) to form CH3CH2OH (ethanol) is a type of hydration reaction. For this reaction to occur, two conditions need to be met:
The presence of a suitable catalyst: The reaction is catalyzed by an acid catalyst, such as phosphoric acid (H3PO4). The acid catalyst helps to break the double bond in C2H4 and promotes the addition of water to form ethanol.
Appropriate reaction conditions:The reaction requires high pressure and temperature to proceed. The typical reaction conditions involve a temperature range of 300-400 °C and a pressure range of 60-70 atm. These conditions are necessary to overcome the high activation energy of the reaction and promote the formation of the desired product, ethanol.
To know more about ethanol, visit :
https://brainly.com/question/25002448
#SPJ1
Aqueous hydrochloric acid (HCI) will react with solid sodium hydroxide (NaOH) to produce aqueous sodium chloride (NaCI) and liquid water (H2O).
Suppose 30.g of hydrochloric acid is mixed with 14.3g of sodium hydroxide. Calculate the maximum mass of sodium chloride that could be produced by the chemical reaction.
Answer:
Explanation:
The balanced chemical equation for the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is:
HCl(aq) + NaOH(s) → NaCl(aq) + H2O(l)
From the balanced equation, we can see that one mole of hydrochloric acid reacts with one mole of sodium hydroxide to produce one mole of sodium chloride and one mole of water.
First, we need to determine which reactant is limiting, i.e., which reactant is completely consumed in the reaction. To do this, we need to compare the number of moles of each reactant, using their respective molar masses:
Molar mass of HCl = 1.008 g/mol (atomic weight of hydrogen) + 35.45 g/mol (atomic weight of chlorine) = 36.46 g/mol
Molar mass of NaOH = 22.99 g/mol (atomic weight of sodium) + 16.00 g/mol (atomic weight of oxygen) + 1.008 g/mol (atomic weight of hydrogen) = 39.99 g/mol
Number of moles of HCl = mass / molar mass = 30.0 g / 36.46 g/mol ≈ 0.823 mol
Number of moles of NaOH = mass / molar mass = 14.3 g / 39.99 g/mol ≈ 0.358 mol
Since the stoichiometric ratio between HCl and NaOH is 1:1, NaOH is the limiting reactant because it has fewer moles than HCl.
Therefore, we can calculate the maximum mass of NaCl that can be produced by the reaction using the number of moles of NaOH:
Number of moles of NaCl produced = number of moles of NaOH used in the reaction = 0.358 mol
Mass of NaCl produced = number of moles of NaCl produced x molar mass of NaCl
Molar mass of NaCl = 22.99 g/mol (atomic weight of sodium) + 35.45 g/mol (atomic weight of chlorine) = 58.44 g/mol
Mass of NaCl produced = 0.358 mol x 58.44 g/mol = 20.9 g
Therefore, the maximum mass of NaCl that can be produced by the reaction is approximately 20.9 g
A chemist is using a solution of HNO3 that has a pH of 3.75.
What is [OH-] for the solution? Round to the
nearest hundredth.
What is the pOH of the solution? Round to the
nearest hundredth.
The level of acidity or alkalinity of aqueous solutions can be conveniently expressed using the pH scale, also known as the pOH scale.
How does pH formula work?"The negative of the logarithm of the molar hydronium-ion concentration" is how pH is defined. The pH formula is written as. P H equals l o g [H 3 0 +] You can alternatively write the pH Formula as. l o g [H +] = p H
The pH of a solution is equal to the solution's hydrogen ion concentration divided by its negative logarithm to base 10:
pH = -log₁₀[H⁺]
pOH = -log₁₀[OH⁻]
For any aqueous solution, the sum of the pH and pOH is 14. That is;
pH + pOH = 14
Now solving for [OH⁻]:
HNO₃ + H₂O → H₃O⁺ + NO₃⁻
Since pH + pOH = 14
pOH = 14 - pH = 14 -3.75 = 10.25
since pOH = -log₁₀[OH⁻]
10.25 = -log₁₀(OH⁻)
[OH⁻] = inverse log₁₀(-pOH)
[OH⁻] = inverse log₁₀(-10.25) = 5.62 x 10⁻¹¹moldm⁻³
To know more about alkalinity visit:-
brainly.com/question/30087623
#SPJ1
Answer:
[OH− ] = 5.62
n = -11
pOH = 10.25
Explanation:
I did it not too long ago
What is the percent of C in Ca(C2H3O2)2? (Ca= 40.08 g/mol, C = 12.01 g/mol, H= 1.01 g/mol, O = 16.00 g/mol) [?]% C Round your answer to the hundredths place. [?] % C
The percent of C in Ca(C2H3O2)2 is 27.28%.
What is the formula mass of Ca(C2H3O2)2?The formula mass of Ca(C2H3O2)2 is 158.17 g/mol.
What is the percent of H and O in Ca(C2H3O2)2?The percent of H in Ca(C2H3O2)2 is 2.54% and the percent of O is 54.50%.
To find the percent of C in Ca(C2H3O2)2, we first need to calculate the molar mass of the compound:
Molar mass of Ca(C2H3O2)2 = (1 × 40.08) + (2 × (2 × 12.01 + 3 × 1.01 + 2 × 16.00)) = 2 × 158.17 = 316.34 g/mol
Now we can calculate the percent of C:
Mass of C in Ca(C2H3O2)2 = 2 × (2 × 12.01) = 48.04 g/mol
Percent of C in Ca(C2H3O2)2 = (48.04 g/mol ÷ 316.34 g/mol) × 100% = 15.19%
Therefore, the percent of C in Ca(C2H3O2)2 is 15.19%, rounded to the hundredths place.
Learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ9
which two of the following compounds would you mix to make a buffer of ph 7.45: h3po4 (fm 97.99), nah2po4 (fm 119.98), na2hpo4 (fm 141.96), na3po4 (fm 163.94)? if you wanted to prepare 1.00 l of buffer with a total phosphate concentration of 0.0500 m, how many grams of each of the two selected compounds would you mix together? (h3po4: pka1
we need to mix 3.68 g of Na2HPO4 and 2.89 g of NaH2PO4 to prepare 1.00 L of a buffer with a total phosphate concentration of 0.0500 M and a pH of 7.45.
pH = pKa + log([base]/[acid])
Substituting the values:
7.45 = 7.20 + log([Na2HPO4]/[NaH2PO4])
0.25 = log([Na2HPO4]/[NaH2PO4])
Antilog(0.25) = [Na2HPO4]/[NaH2PO4]
1.78 = [Na2HPO4]/[NaH2PO4]
Let x be the amount of Na2HPO4 in moles and y be the amount of NaH2PO4 in moles.
Then:
x + y = 0.0500 (total moles of phosphate)
141.96x + 119.98y = (0.0500)(141.96 + 119.98) (total mass of phosphate)
Solving these equations simultaneously, we get:
x = 0.0259 mol
y = 0.0241 mol
Mass of Na2HPO4 = 0.0259 mol × 141.96 g/mol = 3.68 g
Mass of NaH2PO4 = 0.0241 mol × 119.98 g/mol = 2.89 g
Concentration in chemistry refers to the amount of a substance dissolved in a given volume of a solvent. It is a fundamental concept in chemistry and is used to describe the strength of a solution. The concentration of a solution is usually expressed in terms of the amount of solute present per unit volume of the solution. There are several ways to express concentration, including molarity, molality, mole fraction, and percent by mass or volume.
Molarity is the most commonly used unit of concentration and is defined as the number of moles of solute per liter of solution. The concentration of a solution plays an important role in determining its properties and behavior. For example, a highly concentrated solution of salt will have a higher boiling point and lower freezing point than a dilute solution. Concentration also affects the rate of chemical reactions, as higher concentrations of reactants typically result in faster reaction rates.
To learn more about Concentration visit here:
brainly.com/question/10725862
#SPJ4
scientific report on esterificatin
Esterification is a chemical reaction between an alcohol and a carboxylic acid that results in the formation of an ester and a molecule of water.
Write a scientific report on esterificationEsterification is an important class of organic reactions and is widely used in the synthesis of flavors, fragrances, and plastics. In this report, we will explore the fundamental principles and practical applications of esterification.
The experimental procedure involves the reaction between methanol and acetic acid to form methyl acetate and water. The reaction was carried out in a round-bottom flask equipped with a condenser and a thermometer. The reactants were mixed in stoichiometric amounts, and a small amount of sulfuric acid was added as a catalyst. The flask was heated using a hot plate and maintained at a constant temperature of 60°C.
Learn more about esterification:https://brainly.com/question/16010744
#SPJ1
If 25.0 g of NH₃ and 36.7 g of O₂ react in the following reaction, what is the mass in grams of NO that will be formed?
4 NH₃ (g) + 5 O₂ (g) → 4 NO (g) + 6 H₂O (g)
A sample of xenon gas occupies a volume of 5.82 L at 453 K. If the pressure remains constant, at what temperature will this same xenon gas sample have a volume of 2.64 L?
Answer:
204.8 K
Explanation:
(P1 * V1)/T1 = (P2 * V2)/T2
"If the pressure remains constant" means
you can cancel the pressure part of the equation
T2 = (V2 * T1)/(V1)
T2 = (2.64 L * 453 K)/(5.82 L)
T2 = 204.8 K
chatgpt
A sample of xenon gas occupies a volume of 5.82 L at 453 K. If the pressure remains constant, the temperature that will make this same xenon gas sample have a volume of 2.64 L is 220K.
What is combined gas law?The combined gas law is the law of of gaseous state which is made by combination of Boyle's law, Charle's law, Avogadro's law and Gay Lussac's law.
It is a mathematical expression that relates Pressure, Volume and Temperature.
(P1 × V1)÷T1 = (P2 × V2)÷T2
We can also use the following relation-
PV = nRT
At constant pressure,
V1÷T1 = V2÷T2
This is Charles's law.
V1 = 5.82L
T1 = 453K
V2 = 2.64L
T2 = ?
T2 = 220K
Therefore, A sample of xenon gas occupies a volume of 5.82 L at 453 K. If the pressure remains constant, the temperature that will make this same xenon gas sample have a volume of 2.64 L is 220K.
Learn more about combined gas law, here:
https://brainly.com/question/30458409
#SPJ2
Science, Use Dimensional Analysis to solve all of the following:
0.21 moles of S[tex]O_{2[/tex] can be produced by reacting 8 grams of C[tex]S_{2[/tex]
What is Moles?
Mole is a unit of measurement used in chemistry to express the amount of a substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. This number is known as Avogadro's number
To calculate the number of moles of S[tex]O_{2[/tex] produced, we need to use the balanced chemical equation to determine the mole ratio between C[tex]S_{2[/tex]and S[tex]O_{2[/tex].
The balanced chemical equation is:
C[tex]S_{2[/tex] + 3[tex]O_{2[/tex]→ C[tex]O_{2[/tex] + 2S[tex]O_{2[/tex]
The molar mass of C[tex]S_{2[/tex] is 76.14 g/mol.
First, we need to calculate the number of moles of C[tex]S_{2[/tex] present in 8 grams:
moles of C[tex]S_{2[/tex] = mass / molar mass
moles of C[tex]S_{2[/tex] = 8 g / 76.14 g/mol
moles of C[tex]S_{2[/tex] = 0.105 moles
From the balanced equation, we see that the mole ratio between C[tex]S_{2[/tex]and S[tex]O_{2[/tex] is 1:2. This means that for every 1 mole of C[tex]S_{2[/tex] that reacts, 2 moles of S[tex]O_{2[/tex] are produced.
Therefore, the number of moles of S[tex]O_{2[/tex] produced can be calculated as:
moles of S[tex]O_{2[/tex] = moles of C[tex]S_{2[/tex] × 2
moles of S[tex]O_{2[/tex] = 0.105 moles × 2
moles of S[tex]O_{2[/tex] = 0.21 moles
Learn more about Moles from the given link
https://brainly.com/question/15356425
#SPJ1
Complete the word equation:
zinc + hydrochloric acid = __________+hydrogen
copper carbonate + sulfuric acid =_______________+carbon dioxide + water
__________+nitric acid = zinc nitrate+________+water
Answer:
zinc + hydrochloric acid = zinc chloride + hydrogen
copper carbonate + sulfuric acid = copper sulfate + carbon dioxide + water
copper + nitric acid = copper nitrate + nitrogen dioxide + water
Explanation:
Zinc + Hydrochloric acid → Zinc chloride + Hydrogen gasZn + 2HCl → ZnCl2 + H2
Copper carbonate + Sulfuric acid → Copper sulfate + Carbon dioxide + WaterCuCO3 + H2SO4 → CuSO4 + CO2 + H2O
Copper + Nitric acid → Copper nitrate + Nitrogen dioxide + WaterCu + 4HNO3 → Cu(NO3)2 + 2NO2 + 2H2O
Answer:
zinc + hydrochloric acid = zinc chloride + hydrogen
copper carbonate + sulfuric acid = copper sulfate + carbon dioxide + water
zinc + nitric acid = zinc nitrate + hydrogen gas + water
Suppose of lead(II) acetate is dissolved in of a aqueous solution of ammonium sulfate.
Calculate the final molarity of acetate anion in the solution. You can assume the volume of the solution doesn't change when the lead(II) acetate is dissolved in it.
The final molarity of the acetate anion in the solution is 0.06148 M.
StepsThe balanced chemical equation for the reaction between lead(II) acetate and ammonium sulfate is:
[tex]Pb(CH_3COO)_2 + (NH_4)_2SO_4 -- > PbSO_4 + 2NH_4CH_3COO[/tex]
So, if we dissolve 1 mole of Pb(CH₃COO)₂, it will produce 2 moles of acetate anion.
Moles of Pb(CH₃COO)₂ = (mass of Pb(CH₃COO)₂) / (molar mass of Pb(CH₃COO)₂)
Assuming the mass of Pb(CH₃COO)₂ is given, let's say it is 5 g, then:
Moles of Pb(CH₃COO)₂ = (5 g) / (Pb(CH₃COO)₂ molar mass)
The molar mass of Pb(CH₃COO)₂ is:
207.2 g/mol (molar mass of Pb) + 2(16.00 g/mol) + 2(12.01 g/mol) = 325.27 g/mol
Substituting the values, we get:
Moles of Pb(CH₃COO)₂ = (5 g) / (325.27 g/mol) = 0.01537 mol
Since 1 mole of Pb(CH3COO)₂ produces 2 moles of acetate anion, the total number of moles of acetate anion in the solution is:
Moles of acetate anion = 2 x 0.01537 mol = 0.03074 mol
We can calculate the final molarity of the acetate anion in the solution:
Molarity of acetate anion = Moles of acetate anion / Volume of solution
Molarity of acetate anion = 0.03074 mol / 0.5 L = 0.06148 M
The final molarity of the acetate anion in the solution is 0.06148 M.
learn more about molarity here
https://brainly.com/question/17138838
#SPJ1
Based on the above calculation, is the formation of MgO exothermic (negative) or endothermic (positive)?
The amount of energy for the reaction using Hess's Law is -459.82 kJ/mol.
Based on the calculation, the formation is exothermic.
How to calculate amount of energy?To use Hess' Law, we need to rearrange and multiply the given chemical equations to get the desired equation:
2 Mg + 2 HCl → 2 MgCl₂ + H₂ (multiply Equation 1 by 2)
2 MgO + 4 HCl → 2 MgCl2 + 2 H₂O (multiply Equation 2 by 2)
2 H₂ + O₂ → 2 H₂O (multiply Equation 3 by 2)
2 Mg + O₂ + 4 HCl → 2 MgCl₂ + 2 H₂O (add the above equations)
The enthalpy change of the desired equation can be calculated as follows:
AH = [AH₁ × 2] + [AH₂ × 2] + [AH₃ × (-2)]
AH = [(Answer to #5 -1) × 2] + [(-125 kJ/mol) × 2] + [(-285.82 kJ/mol) × (-2)]
AH = [-457.82 - 2] kJ/mol
AH = -459.82 kJ/mol
Since the value of AH is negative, the formation of MgO is exothermic. This means that energy is released during the formation of MgO.
Learn more on energy amount here: https://brainly.com/question/30083274
#SPJ1
Calculate the mass of butane needed to produce 67.5 g of carbon dioxide.
Express your answer to three bignificant figures and include the appropriate units.
The mass of butane needed to produce 67.5 g of carbon dioxide is 22.27 g.
StepsThe balanced chemical equation for the combustion of butane (C4H10) is:
2 C4H10 + 13 O2 → 8 CO2 + 10 H2O
This equation shows that 2 moles of butane react with 13 moles of oxygen to produce 8 moles of carbon dioxide. The molar mass of butane is 58.12 g/mol, and the molar mass of carbon dioxide is 44.01 g/mol.
To calculate the mass of butane needed to produce 67.5 g of carbon dioxide, we can use the following steps:
Calculate the number of moles of carbon dioxide produced:
67.5 g CO2 x (1 mol CO2 / 44.01 g CO2) = 1.534 mol CO2
Use the mole ratio from the balanced chemical equation to find the number of moles of butane needed:
1.534 mol CO2 x (2 mol C4H10 / 8 mol CO2) = 0.3835 mol C4H10
Calculate the mass of butane needed:
0.3835 mol C4H10 x 58.12 g/mol = 22.27 g C4H10
Therefore, the mass of butane needed to produce 67.5 g of carbon dioxide is 22.27 g.
learn more about mass here
https://brainly.com/question/19385703
#SPJ1
a buffer is made by adding 0.300 mol ch3cooh (acetic acid) and 0.300 mol ch3coona (sodium acetate) to enough water to make 1.00 l of solution. calculate the ph after 0.020 mol of naoh is added to this buffer. (you may again ignore change in volume as a result of the addition.) reference data: pka of acetic acid is 4.74 g
The pH of the buffer after the addition of 0.020 mol of NaOH is 4.83.
Henderson-Hasselbalch equation: pH = pKa + log([A^-]/[HA]),
[CH3COOH] = 0.300 mol/1.00 L = 0.300 M
[CH3COO^-] = 0.300 mol/1.00 L = 0.300 M
CH3COOH + NaOH → CH3COO^- + H2O
[CH3COOH] = (0.300 mol - 0.020 mol)/1.00 L = 0.280 M
CH3COO^-] = (0.300 mol + 0.020 mol)/1.00 L = 0.320 M
pH = pKa + log([CH3COO^-]/[CH3COOH])
pH = 4.74 + log(0.320/0.280)
pH = 4.83
The pH of a solution can be measured using a pH meter or pH paper, which changes color based on the pH of the solution. It is a dimensionless quantity that indicates the concentration of hydrogen ions (H+) in a solution. pH stands for "power of hydrogen" and is defined as the negative logarithm of the hydrogen ion concentration. A pH of 7 is considered neutral, pH values below 7 indicate acidity, and pH values above 7 indicate alkalinity.
pH is an important parameter in many chemical and biological processes, as it can affect the behavior and properties of molecules and ions in solution. Maintaining the correct pH in biological systems is critical for many physiological processes, and pH control is important in many industrial processes as well.
To learn more about pH visit here:
brainly.com/question/15289741
#SPJ4
Lab: Measuring pH Assignment: Lab Report
A sample lab report that measures pH levels is given below:
The Laboratory ReportIntroduction:
In this experiment, we measured the pH levels of various substances using a pH meter. The pH meter measures the acidity or basicity of a substance on a scale of 0 to 14, with 0 being extremely acidic, 7 being neutral, and 14 being extremely basic.
Materials:
pH meter
Distilled water
Hydrochloric acid (HCl)
Sodium hydroxide (NaOH)
Vinegar
Lemon juice
Baking soda
Tap water
Procedure:
Calibrated the pH meter according to the manufacturer's instructions using distilled water.
Prepared five test solutions in beakers:
50 mL of 0.1 M HCl
50 mL of 0.1 M NaOH
50 mL of vinegar
50 mL of lemon juice
50 mL of baking soda
Rinsed the pH meter probe with distilled water and then dipped it into each test solution, making sure that the probe did not touch the bottom or sides of the beaker.
Recorded the pH measurement for each solution and compared it to the expected pH range based on the known properties of the substances.
Read more about pH levels here:
https://brainly.com/question/172153
#SPJ1
Answer:
I have attached my interpretation of the pH measuring lab. All I ask is that you at least change some of the answers, please
Explanation:
What is the Heisenberg Uncertainty Principle?
A. We can know either the speed (momentum) or location, but not both at the same time.
B. We cannot ever know the speed (momentum) or location of the electron.
C. We can know only the speed (momentum) of the electron, but never the location.
D. We can know only the location of the electron, but never the speed (momentum).
According to the Heisenberg Uncertainty Principle, we can only know one of two things at once: either the speed (momentum) or the position.
When does the position of momentum become unpredictable when the location of a particle is uncertain?The uncertainty principle can also be explained in terms of a particle's momentum and position. The momentum of a particle is calculated by dividing its mass by its speed.
What does the Heisenberg uncertainty principle translate into in terms of position and momentum?Heisenberg's Uncertainty Principle states that there is some uncertainty when measuring a particle's variable. a term frequently used to describe the position and momentum of a particle.
To know more about momentum visit:-
https://brainly.com/question/30325893
#SPJ1
Suppose that you have a piece of aluminum foil and have
rolled it into a ball. You take another piece of foil the same size and make it into a flat, open box. Then you put both of these
objects in a tub of water. What do you think would happen?
The ball will sink because its weight is greater than the amount of water it displaces. Since their weight is less than the amount of water they displace, objects made of aluminium foil like a boat, paper and cups will float on water.
Why can metal foil that has been rolled into a ball float in water whereas solid aluminium sinks?Whether an item will float or sink in another material depends on its density. If an object's density is lower than the liquid it is placed in, it will float. If an object is heavier than the liquid it is immersed in, it will sink.
While individuals may create their goods or aluminium foils with the aluminium, beating the metal to form aluminium foil is a physical change.
learn more about aluminium foil
https://brainly.com/question/28735093
#SPJ1
100.0 mL of a saturated solution of copper (I) chloride (KSP = 1.72x10-7) with some solid present has
50.0 mL of distilled water added to it. The solution is stirred and some solid remains.
A) What happens to the [Cu+]?
B) What happened to the amount of solid present in the beaker?
C) Sketch an image that shows the solution/solid after the addition of the wate
When 50.0 mL of distilled water is added to 100.0 mL of a saturated solution of copper (I) chloride (KSP = 1.72x10-7) with some solid present, the answer becomes diluted.
What happens to the [Cu+]?When 50.0 mL of distilled water is added to 100.0 mL of a saturated solution of copper (I) chloride (KSP = 1.72x10-7) with some solid present, the [Cu+] will decrease because the answer is now less concentrated. The solid in the beaker will remain the same because the solution is still saturated.
What happened to the amount of solid present in the beaker?The first beaker will expand when heat is applied because it will absorb the heat. Therefore the water level will first decrease due to the beaker's increased volume. Water will eventually warm up and expand as its temperature rises. Water level will consequently rise later.
to know more about saturated solutions here:
brainly.com/question/1851822
#SPJ1
in terms of the henderson-hasselbalch equation, show how it can be solved to find ka of an acid when the concentrations of the conjugate acid and bases are equal.
The pH of the solution is equal to the pKa of the acid when the concentrations of the conjugate acid and base are equal.
The Henderson-Hasselbalch equation is given by:
pH = pKa + log([A-]/[HA])
Where:
pH = the pH of the solution
pKa = the acid dissociation constant of the acid
[A-] = the concentration of the conjugate base
[HA] = the concentration of the acid
When the concentrations of the conjugate acid and base are equal, [A-] = [HA], and the Henderson-Hasselbalch equation can be simplified to:
pH = pKa + log(1)
log(1) = 0, so:
pH = pKa
Therefore, when the concentrations of the conjugate acid and base are equal, the pH of the solution is equal to the pKa of the acid. This can be used to determine the acid dissociation constant (Ka) of the acid by measuring the pH of the solution when the concentrations of the conjugate acid and base are equal.
To learn more about henderson-hasselbalch equation visit;
https://brainly.com/question/13423434
#SPJ4