Sunspot Beverages, Limited, of Fiji uses the weighted-average method in its process costing system. It makes blended tropical fruit drinks in two stages. Fruit juices are extracted from fresh fruits and then blended in the Blending Department. The blended juices are then bottled and packed for shipping in the Bottling Department. The following information pertains to the operations of the Blending Department for June.

Units Percent Completed
Materials Conversion
Work in process, beginning 58,000 70% 40%
Started into production 299,000
Completed and transferred out 289,000
Work in process, ending 68,000 75% 25%


Materials Conversion
Work in process, beginning $ 20,000 $ 6,200
Cost added during June $ 214,600 $ 131,500


Required:
1. Calculate the Blending Department's equivalent units of production for materials and conversion in June.
2. Calculate the Blending Department's cost per equivalent unit for materials and conversion in June.
3. Calculate the Blending Department's cost of ending work in process inventory for materials, conversion, and in total for June.
4. Calculate the Blending Department's cost of units transferred out to the Bottling Department for materials, conversion, and in total for June.
5. Prepare a cost reconciliation report for the Blending Department for June.

Using the provided information, we can prepare the Statement of Financial Position of Phoenix Chemist Shop as of 31 December 2019:

Phoenix Chemist Shop

Statement of Financial Position

As of 31 December 2019

Assets:

Cash on hand R 50,000

Accounts receivable R 1,000

Inventory in trade R 60,000

Land and buildings R 500,000

Total Assets R 611,000

Liabilities:

Bank overdraft R 1,100

Accounts payable R 70,000

Total Liabilities R 71,100

Owner's Equity:

Owner's capital R 539,900

Total Liabilities and Owner's Equity R 611,000

Note that the owner's capital was calculated as follows:

Assets (R 611,000) - Liabilities (R 71,100) = Owner's Capital (R 539,900)

The balance sheet, usually referred to as a statement of financial position, is a document that details a company's financial situation at a specific period.

It does attempt to evaluate the business's financing, usage of funds, and the relationship between assets and liabilities, but it does not offer a foundation for evaluating the underlying wealth of the company over time.

Learn more about statement of financial position on;

https://brainly.com/question/30451310

#SPJ1

Tamara is a new hire at Target. In learning the organizational norms and culture, she observes employees coming to work 15 minutes early and working overtime. This is an example of observable culture, one of the three levels of organizational culture.

What are organizational norms? Organizational norms are an important part of organizational culture that govern the behavior of employees, organizational values, and the general way things are done in a company. Organizational culture is made up of three levels, as follows:

a) Observable culture (Surface-level): Observable culture is the surface level of organizational culture that can be easily observed through the daily activities, behavior, and patterns of employees. For instance, dress codes, values, behavior patterns, office arrangements, symbols, rituals, and ceremonies are all part of the observable culture.

b) Shared values (Middle-level): Shared values are the intermediate level of organizational culture that defines what is important to the company and how employees should behave in different situations. Shared values are at the heart of organizational culture, and they reflect the organization's goals, missions, and strategies.

c) Basic assumptions (Deep-level): Basic assumptions are the deepest level of organizational culture that guides employees' thoughts, actions, and behavior, whether they realize it or not. Basic assumptions are unconscious, taken-for-granted beliefs and values that employees hold, and they influence how they make decisions, act, and interact.

Learn more about "Organisational culture" https://brainly.com/question/30833560

#SPJ11

Answer:

Economic development is a process that involves sustained growth and improvements in the standard of living for individuals within a society. Small and medium scale enterprises (SMEs) play a critical role in economic development, as they are an essential driver of job creation, innovation, and increased productivity. In this essay, I will discuss economic development in relation to vibrant and successful SMEs, highlighting their significance in fostering sustainable economic growth.

SMEs are essential contributors to the economy, accounting for a significant percentage of jobs and GDP in many countries. They are often considered the backbone of the economy because they are generally more flexible and adaptable than larger businesses. SMEs are also important in promoting economic diversity and reducing income inequality, as they often operate in niche areas, providing goods and services that are not typically offered by larger corporations.

Successful SMEs can drive economic development in several ways. Firstly, they contribute to job creation, which is essential for economic growth. SMEs are responsible for creating many new jobs, which help to reduce unemployment rates and provide opportunities for individuals to improve their standard of living. Secondly, SMEs can spur innovation, as they are often more agile and responsive to changes in the market than larger corporations. SMEs can develop and test new ideas and products, which can lead to technological advancements and increased productivity across the economy. Thirdly, successful SMEs can contribute to increased productivity by adopting efficient business practices, such as lean manufacturing or efficient supply chain management.

To foster vibrant and successful SMEs, governments and other stakeholders must provide an enabling environment that supports their growth and development. This includes policies that promote entrepreneurship, such as providing access to finance and other resources that can support new business development. Governments can also create favorable tax policies and regulatory frameworks that encourage SME growth and investment. Additionally, promoting education and training programs that teach skills such as entrepreneurship, business management, and finance can also help SMEs thrive.

In addition to government policies and support, SMEs can also benefit from partnerships with larger corporations. Collaboration with larger firms can provide SMEs with access to resources such as financing, research and development capabilities, and marketing expertise. This can help SMEs to develop new products and services, expand their market reach, and improve their competitiveness.

Finally, successful SMEs must prioritize sustainability and social responsibility. This includes creating environmentally sustainable practices, promoting fair labor practices, and supporting local communities. These practices can help SMEs to build long-term relationships with their customers, employees, and communities, which can contribute to their success and sustainability.

In conclusion, SMEs play a critical role in economic development, contributing to job creation, innovation, and increased productivity. To foster vibrant and successful SMEs, governments and other stakeholders must provide an enabling environment that supports their growth and development. SMEs can also benefit from partnerships with larger corporations and must prioritize sustainability and social responsibility. Overall, SMEs are a critical component of a vibrant and sustainable economy, and their success is essential for promoting sustainable economic development.

Without trade, each country will produce based on their comparative advantage and opportunity cost. In Country A, one unit of shoes requires two units of labor, while one unit of computers requires four units of labor.

Thus, the opportunity cost of producing one unit of shoes in Country A is two units of computers, while the opportunity cost of producing one unit of computers is 0.5 units of shoes.

In Country B, one unit of shoes requires three units of labor, while one unit of computers requires six units of labor. Thus, the opportunity cost of producing one unit of shoes in Country B is two units of computers, while the opportunity cost of producing one unit of computers is 0.5 units of shoes.

Assuming each country has 60 units of labor available, Country A will produce 30 units of shoes and 15 units of computers, while Country B will produce 20 units of shoes and 10 units of computers. Therefore, without trade, a total of 50 pairs of shoes and 25 computers will be produced.

To know more about trade click here:

brainly.com/question/30552848

#SPJ4

Accounting principles are the principles and rules that organizations and different bodies should observe while detailing monetary information.

The correct description of each of the accounting principles are:

Learn more about accounting principles:

https://brainly.com/question/10702405

#SPJ4

Niko was performing the fourth stage of the communication process, which is feedback.

Feedback is an essential component of effective communication, as it allows the sender to gauge whether the message has been received and understood by the receiver. By asking if there was anything that the board of directors did not understand, Niko was seeking feedback and attempting to ensure that his message had been effectively conveyed. This stage of the communication process is crucial in ensuring that the communication is successful and that the receiver has understood the message as intended. Through feedback, the sender can clarify any misunderstandings and adjust their communication approach accordingly.

To learn more about  feedback refer to:

brainly.com/question/26994432

#SPJ4

The correct answer is option a. in both its government‐wide statement of net position and a governmental fund balance sheet. Bond anticipation notes are debt instruments that are issued by a state or local government to help finance infrastructure projects that will be paid for with longer-term bonds.

Bond anticipation notes are considered short-term debt instruments that are issued to raise funds for projects that have yet to be completed in order to keep the project moving forward. For example, a city may issue bond anticipation notes to finance the construction of a new school, with the expectation that they will be able to repay the debt with the proceeds from the sale of longer-term bonds once the school is completed.

In the given scenario, a city issued bond anticipation notes on October 21, 2020, and then refunded the notes with 30-year bonds in January 2021.

In its financial statements for the fiscal year ending December 31, 2020, which are issued in April 2021, it should report the bond anticipation notes as obligations in both its government-wide statement of net position and a governmental fund balance sheet.

This is because bond anticipation notes are considered to be a form of debt, and as such, they should be reported in both of these financial statements.The correct answer is option a

for more such question on Bond anticipation

https://brainly.com/question/28146692

#SPJ11

Extrinsic reward is the ideal course of action in this circumstance. it is simply a monetary value.

An external reward is one that is given to a person or employee in exchange for achieving something. They typically have a monetary value, such as a raise in pay, a bonus, an honour, or public acclaim. They are typically proposed by the person's immediate manager, who chooses them. These rewards are typically monetary, such as a pay raise, a cash bonus for good work, or a gift card for going above and beyond the call of duty. Due to the fact that most people value money or comparable rewards, these incentives encourage and invigorate workers.

To know about Extrinsic reward visit:

https://brainly.com/question/30869200

#SPJ1

The answer is d) outsourcing some aspect of production. Outsourcing some aspect of production is not a source of technological advancement for a producer.

Technological advancement refers to the application of scientific knowledge, tools, and techniques to improve processes, products, and services. Better trained workers, more efficient physical capital, and higher skill levels of managers are all sources of technological advancement because they can lead to increased productivity, higher quality, and more innovation. Outsourcing, on the other hand, refers to contracting out some aspect of the production process to another company or organization, which may or may not involve the use of technology. While outsourcing can provide cost savings and other benefits, it is not inherently a source of technological advancement.

To know more about technological advancement click here:

brainly.com/question/8798227

#SPJ4

The prepared journal entry is To cancel Mr. Lai's outstanding debt: Accounts Receivable: $8000 from Mr. Lai

$8000 as a provision for doubtful accounts

To document the allowance for dubious debts:

Bad Debt Cost: $158,000 multiplied by 10% $15,800

Compensation for Uncertain Accounts $15,800

In your company's books, a journal entry serves as a documentation of a business transaction. Every transaction requires at least two diary entries in double-entry bookkeeping.

Receivables - $158,000 = $168,000: Doubtful Accounts Allowance = $12,400 Accounts Receivable cash realisable value is $145,600. As a result, at the end of 2022, the cash realisable value of accounts receivable was $145,600.

To Know more about Journal Entry :

brainly.com/question/20421012

#SPJ9

Compounding is the interaction where the worth of a speculation increments on the grounds that the income on a venture, both capital gains and premium, acquire interest over the long haul.

The formula of compound interest rate is,

A=P(1+r/n)nt

Putting all values of P,r,n,t we get,

A=500(1+.10/1)5=500 ×1.61 = 805.255= 805.26

So, the future value is $805.26

Your wealth grows at a faster rate thanks to compound interest. Because you will earn returns on the money you invest and on returns at the end of each compounding period, it grows a sum of money faster than simple interest.

When reinvested interest is used, compounding is a method for determining the total interest on the principal. It leads to an exponential increase in assets or capital for investors. Similarly, debtors face a significant burden when compound interest is applied to liabilities like debt.

Learn more about compounding:

brainly.com/question/20595589

#SPJ1

Answer:

use the average function

Explanation:

e.g.

=AVERAGE(A2:A6)

= calculates the average (mean) of the numbers in cells A2 through A6.

hope this makes sense!

A. Last-in, first-out (LIFO): Cost of goods sold = $574,350, b. Weighted average cost: Ending inventory = $272,880.50, c. First-in, first-out (FIFO): Cost of goods sold = $551,550, and d. Specific identification: the cost of goods sold and ending inventory depend on the specific units that were sold and in ending inventory.

a. Last-in, first-out (LIFO):

Units Unit Cost Total Cost

Beginning Inventory 3,200 $55 $176,000

Purchase on Jan. 30 4,100 $69 $282,900

Purchase on May 1 2,800 $85 $238,000

Total 10,100 - $696,900

We assume that the units sold came from the most recent purchases first, and the ending inventory is composed of the oldest units.

The units sold during the year are 2,850 + 3,300 = 6,150. We attribute this cost to the most recent purchases, i.e., 6,150 units sold come from the purchase of January 30 and May 1.

Ending inventory = 3,200 + 4,100 + 2,800 - 6,150 = 3,950 units

Cost of goods sold = 6,150 × $85 + (3,200 × $55 + 900 × $69) = $574,350

b. Weighted average cost:

Units Total Cost Average Cost

Beginning Inventory 3,200 $176,000 $55

Purchase on Jan. 30 4,100 $282,900 $69

Purchase on May 1 2,800 $238,000 $85

Total 10,100 $696,900 $68.87

We calculate the weighted average cost per unit by dividing the total cost of goods available for sale by the total number of units.

Cost of goods sold = 6,150 × $68.87 = $422,019.50

Ending inventory = 3,950 × $68.87 = $272,880.50

c. First-in, first-out (FIFO):

Units Unit Cost Total Cost

Beginning Inventory 3,200 $55 $176,000

Purchase on Jan. 30 4,100 $69 $282,900

Purchase on May 1 2,800 $85 $238,000

Total 10,100 - $696,900

We assume that the units sold came from the oldest purchases first, and the ending inventory is composed of the most recent units.

The units sold during the year are 2,850 + 3,300 = 6,150. We attribute this cost to the oldest purchases, i.e., 2,850 units sold come from the beginning inventory and 3,300 units sold come from the purchase of January 30.

Ending inventory = 3,200 + 800 + 2,800 = 6,800 units

Cost of goods sold = 2,850 × $55 + 3,300 × $69 + 900 × $85 = $551,550

d. Specific identification:

Units Unit Cost Total Cost

Beginning Inventory 1,280 $55 $70,400

Purchase on Jan. 30 2,460 $69 $169,740

Purchase on May 1 2,800 $85 $238,000

Total 6,540 - $478,140

We assume that the March 14 sale was selected two-fifths from the beginning inventory and three-fifths from the purchase of January 30, and that the August 31 sale was selected from the remainder of the beginning inventory, with the balance from the purchase of May.

Units Total Cost

Sold on March 14 1,140 $78,600 [(2,850 × 2/5) × $55 + (2,850 × 3/5) × $69]

Sold on August 31 1,710 $98,850 [(3,300 - 1,140 from March 14) × $55 + (3,300 - 1,140 from March 14) × $69]

Ending inventory 3,690 $300,690 [(1,280 - 1,140 from March 14) × $55 + (2,460 - 1,710 from August 31) × $69 + 2,800 × $85]

Cost of goods sold $177,450 [(1,140 from March 14) × $55 + (2,460 - 1,140 from March 14) × $69 + (1,710 from August 31) × $69 + (2,800 - 1,710 from August 31) × $85]

Note that the specific identification method uses the actual cost of each unit sold and in ending inventory, rather than averaging or assuming a cost flow assumption. As a result, the cost of goods sold and ending inventory depend on the specific units that were sold and in ending inventory.

learn more about ending inventory: https://brainly.com/question/24868116

#SPJ1

The complete question goes thus:

Gladstone Company tracks the number of units purchased and sold throughout each accounting period but applies its inventory costing method at the end of each period, as if it uses a periodic inventory system. Assume its accounting records provided the following information at the end of the annual accounting period, December 31 Units Unit Cost Transactions 3,200 $55 Beginning inventory, January 1 Transactions during the year: a. Purchase, January 30 4,100 69 b. Sale, March 14 ($100 each) (2,850) c. Purchase, May 1 2,800 85 d. Sale, August 31 ($100 each) (3,300) Assuming that for Specific identification method (item ld) the March 14 sale was selected two-fifths from the beginning inventory and three-fifths from the purchase of January 30. Assume that the sale of August 31 was selected from the remainder of the beginning inventory, with the balance from the purchase of May Required 1. Compute the amount of goods available for sale, ending inventory, and cost of goods sold at December 31 under each of the following inventory costing methods: (Round intermediate calculations to 2 decimal places and final answers to the nearest whole dollar amount.) of Goods Available for Sale Ending Inventory Cost of Goods Sold S 696,900 a. Last-in, first-out b. Weighted average cost 696,900 c. First-in, first-out 696,900 696,900 d. Specific identification

To calculate the cost of completed and transferred-out production, we need to determine the number of equivalent units completed and transferred out during the period.

Let's assume that the Rolling Department had 1,000 units in beginning work in process inventory on October 1, and it started and completed 5,000 units during the period. Therefore, the total number of units to be accounted for is 6,000. To determine the equivalent units for direct materials and conversion, we need to add the units in beginning work in process to the units started and subtract the units in ending work in process. Let's assume that the Rolling Department has 500 units in ending work in process inventory on October 31. Therefore, the equivalent units for direct materials and conversion are:

Direct materials: 6,000 units

Conversion: 5,500 units

To calculate the cost of completed and transferred-out production, we need to multiply the equivalent units by their respective costs per unit and then add the beginning work in process inventory. Therefore, the cost of completed and transferred-out production is:

Direct materials: $0.30 × 6,000 = $1,800

Conversion: $2.45 × 5,500 = $13,475

Total: $1,800 + $13,475 + $1,550 = $16,825

To determine the cost of the ending work in process inventory, we need to multiply the equivalent units in ending work in process by their respective costs per unit. Therefore, the cost of the ending work in process inventory is:

Direct materials: $0.30 × 500 = $150

Conversion: $2.45 × 500 = $1,225

Total: $150 + $1,225 = $1,375

Finally, to determine the total costs assigned by the Rolling Department, we need to add the cost of completed and transferred-out production and the cost of the ending work in process inventory. Therefore, the total costs assigned by the Rolling Department are $16,825 + $1,375 = $18,200.

Learn more about inventory here:

https://brainly.com/question/14184995

#SPJ1

Elise Dubois, the taxpayer, has a salary, gaming earnings, and different expenses. A Form 1040 with Schedules 1 and A is created using the supplied information, and the correct tax tables are used to determine the overall tax liability.

Only if you itemise your deductions on Schedule A (Form 1040) and keep track of your winnings and losses are gambling losses eligible for deduction. The total of your losses cannot exceed the total of your stated gambling income on your tax return.

The taxpayer's gaming activities will be regarded as business activity, and any winnings, if they were commercial in character and conducted in a businesslike manner.

To know more about taxpayer visit:-

https://brainly.com/question/30654668

#SPJ1

The income statement at 71,000 units is in the image below and the net income (loss) is $358,764

One of a company's financial accounts, an income statement or profit and loss account, lists the company's revenues and costs for a specific time period.

It describes the process through which revenues are converted into net income or net profit.

The income statement presents revenue, expenses, and net income.

The variable cost total is $829,990

An income statement's objective is to display a company's financial success over a specific time frame. It narrates the financial history of a company's operations. You may discover all of the revenue and expense accounts for a specific time period in an income statement.

Read more about income statement here:

https://brainly.com/question/28936505

#SPJ1

A business has a debt that is due in May, Year 2. At December 31, Year 1 the company does not plan to use any of its current assets to repay this debt. This debt should be classified as long-term liabilities on the December 31, Year 1 balance sheet.

A balance sheet is a financial statement that provides a snapshot of a company's financial position at a specific point in time.

Now, let's look at your question. The debt in question is due in May of Year 2. However, on December 31, Year 1, the company does not plan to use any of its current assets to repay this debt.

In this case, the debt should be classified as a long-term liability on the December 31, Year 1 balance sheet. Long-term liabilities are debts that are not due within the next 12 months. Examples include bank loans, bonds, and mortgages.

It's important to note that the classification of a liability as current or long-term can change over time.

In conclusion, when a business has a debt that is due in the future but does not plan to use its current assets to repay it, the debt should be classified as a long-term liability on the balance sheet.

To know more about balance sheet here

https://brainly.com/question/26323001

#SPJ4

Complete Question:

A business has a debt that is due in May, Year 2. At December 31, Year 1 the company does not plan to use any of its current assets to repay this debt. This debt should be classified as ______ on the December 31, Year 1 balance sheet.

Given that the market is a monopolistic competition,

1. the firm will set an output of 800 Units

2. The firm will set a price of $6;

3.The firms Total Revenue will be $8,000

4. The Firms Total Cost will be: $4,000

5.The Firms Profit will equal: $4,000

1) The firm will set an output where marginal revenue (MR) equals marginal cost (MC), which is at the point where the MR and MC curves intersect. This level of output will be lower than the level of output that would maximize profits in a perfectly competitive market. This point on the graph is at the point where the quantity demanded is 800 units.

2) The firm will set a price that corresponds to the point on the demand curve that is tangent to the firm's average total cost (ATC) curve. This price will be higher than the price that would prevail in a perfectly competitive market. That price on the graph is $10.

3) The firm's total revenue will be the price it charges for its product multiplied by the quantity it sells. This would be:
10 * 8000 = $8,000

4) The firm's total cost will depend on the level of output it produces. The total cost curve will be U-shaped, reflecting the presence of economies of scale at low levels of output and diseconomies of scale at high levels of output.

5) In a monopolistic competition, the firm's total cost will be determined by the minimum point of the average total cost (ATC) curve. This is because the ATC curve represents the firm's average cost per unit of output, which includes both variable and fixed costs. This point on the graph is approximately $5. Thus, Total Cost = 5 x 800 = $4,000


The profit will be the Total Revenue - Total Cost =
$8000 - $4000

Profit = $4,000.

Learn more about Monopolistic Competition at:

https://brainly.com/question/9357139

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:

Monopolistic Competition

Using the Graph above answer the following

1. This firm will set an output of:

2. The firm will set a price of:

3.The firms Total Revenue will be:

4. The Firms Total Cost will be:

5.The Firms Profit will equal:

Answer:             1. Internet of Things(IOT)

                           2. Artifical Intelligence

                           3. Blockchain

                           4. 5G

                           5. Virtual Reality(VR)

Explanation: These are popular Technologies and business trends that are ruling the world only by data collection. There is a biggest change over in the business world where people are developing the world by start-ups and building the world economy making it the better place to live.

1.Internet of things: The great collaboration of electronics and internetwork that gives you a by product of IOT. For instance, the top company of iTechArt is a leading company with the connectivity of IOT getaway developments and applications.

2.Artificial Intelligence: The current trend of ChatGpt is sitting on the throne in the market. Now, that's the power of AI where it builds the world. Businesses are making millions of turnover only by making the AI available to the commoner.

3.Blockchain: The only usage of Blockchain of digital money either it is a bitcoin or cryptocurrencies storing the valuable database in a digital format. Coinbase Global company is the most successful blockchain industry making its market value in 9.05 billion dollars

4. 5G: There was a time where the network connectivity is weaker than human connectivity, but now humans are living in the internet. Fast internet speed, improved connectivity to the entire world. Lead companies like samsung, huawei, Nokia, Qualcomm are successful business in the world making their 5G services worthwhile.

5.Virtual Reality(VR): Having experiences the reality in the most possible ways through the effective devices making the human life even more lively. Metaverse is leading and successful business that is providing the best services to the human world through Virtual Reality.

These are the top five business trends that have enhances the role of information systems in today's world.

The changes implemented by LeasePlan were meant to mitigate the diversity barrier of E. lack diversity in senior management.

It seems that the absence of diversity in top management was the main obstacle and difficulty in managing diversity at Lease Plan. This is demonstrated by the fact that, in 2003, just one of the company's top seven executives was a woman, and men made up the vast majority of top managers.

LeasePlan was able to raise the proportion of women in senior roles and foster diversity within the organization by replacing some existing managers, adopting modifications to career counseling and reward systems, and replacing some existing managers.

Find out more on diversity barriers at https://brainly.com/question/28769028

#SPJ1

Options for this question include:

Hostile working environment for diverse employees

Poor career planning

Inaccurate stereotypes and prejudice

Ethnocentrism

lack diversity in senior management

Depending on the capacity of the various stages within a workflow and the amount of input passing through it, bottlenecks can either be short-term or long-term.

A bottleneck in a manufacturing process is typically a physical location where the overall production process slows down due to a slow equipment or slow-moving raw materials.

An effective job design encourages employees to perform well by putting their all into their work, which increases employee involvement and satisfaction. Employee productivity is greatly aided, and it also boosts their loyalty to the company.

To know more about bottleneck visit:-

https://brainly.com/question/31217230

#SPJ1

Using QuickBooks Online, you must begin by clicking the " Receive Payments " option. Intuit created and sells the accounting software suite known as QuickBooks.

How can transactions be created in QuickBooks?

The procedures listed below can be used to create transactions on QuickBooks Online based on transactions that have already occurred:

Choose "Receive Payment" by clicking the "+" button in the dashboard's upper right corner.

Choose "Esther Green" as the client, and then enter the sum paid as the invoice's unpaid balance. Choose "Cheque" as the payment option and input the 598-digit check number. Transaction saved.

Choose "Invoice" by clicking on the "+" symbol once again. Choose "Roy Fisher" as the client and type $550 as the balance owed. Choose Melanie's unique floral design service in the products/services area to apply the credit of $25 + GST to the bill. Transaction saved.

Refresh your browser and choose "Receive Payment" from the "+" menu. Choose "Karuna Ramachandran" as the client and input the sum owed for the two unpaid bills. Choose "Debit" as the mode of payment, then save the deal.

Choose "Credit Note" by clicking on the "+" button once again. Choose "Sharon McColl" as the customer, then input a credit amount of $25 + GST. Save the transaction and apply the credit to the birthday vase invoice.

Refresh your browser and choose "Receive Payment" from the "+" menu. When the credit has been applied, choose "Sharon McColl" as the client and input the new balance. Choose "Cash" as the mode of payment, then save the deal.

Click the "+" symbol and choose "Bank Deposit" to make a deposit. Choose the payments made by Karuna Ramachandran, Sharon McColl, and Esther Green as the deposit items, then save the transaction.

Go to the Reports tab on the left-side menu and choose "Profit and Loss" to create a report. Run the report with April 8, 2026 as the date range.

Learn more about bank deposit:

https://brainly.com/question/2507231

#SPJ1

Entry in a journal: Raw materials bought on credit: Inventory of Raw Materials: 410,000 Accounts Raw materials used in production, payable at 410,000: Manufacturing Overhead 360,000 Work in Process Inventory 20,000.

Job-order costing is used by the manufacturing company Hogle Company. The company's inventory balances on January 1, the start of its fiscal year, were as follows: The business allocates overhead costs to projects based on the number of machine hours used.

Overhead, direct labour, and direct materials are the three primary categories of expenses that are taken into consideration during the production process.

To know more about production visit:-

https://brainly.com/question/16848613

#SPJ1

Answer: The best answer that describes goods produced for immediate use is C. consumer goods. Consumer goods are goods that are produced for direct use by individuals or households, as opposed to goods produced for use in the production of other goods (capital goods) or for resale to other businesses or consumers (commercial or wholesale goods). Examples of consumer goods include food, clothing, electronics, and household appliances.

Answer:

In accounting, contingent liabilities are liabilities that may be incurred by an entity depending on the outcome of an uncertain future event such as the outcome of a pending lawsuit.

Explanation:

These liabilities are not recorded in a company's accounts and shown in a type of balance sheet when both probable and reasonably estimable as 'contingency' or 'worst case' financial outcome.  The likelihood of loss is described as probable, reasonably possible, or remote. The ability to estimate a loss is described as known, reasonably estimable, or not reasonably estimable. It may or may not occur.

Hope this helps!!!

If the economy is initially at full employment, a decrease in government purchases would lead to a recession.

This would cause a shift in the aggregate demand curve to the left. This shift in aggregate demand would cause a decrease in both the price level and output in the short run. The long-run adjustment would involve a decrease in the price level and a return to potential output.

The diagram that best portrays this scenario is Diagram A. In this diagram, the short-run aggregate supply curve intersects the aggregate demand curve at potential output, which is also the full employment level of output. A leftward shift in the aggregate demand curve will cause a recession with lower output and lower prices in the short run. The long-run adjustment will cause a decrease in the price level but a return to the full employment level of output.

To learn more about recession  refer to:

brainly.com/question/14735206

#SPJ4

From 2007 until 2013, Vineet Nayar, an Indian business leader, led HCL Technologies, a worldwide provider of IT services. Nayar is renowned for his "Employees First, Customers Second" leadership ethos, which highlighted the significance of empowering and energizing staff in order to foster economic success.

When Nayar took over as CEO of HCL Technologies, he discovered that the organization had a bureaucratic and hierarchical culture that was impeding its development and creativity. Nayar developed a number of programs targeted at empowering and engaging staff in an effort to alter this culture, including: Reversing the organizational pyramid, Transparent communication and Employee engagement programs.

Nayar reversed the organizational pyramid by placing senior executives at the bottom and frontline employees at the top. He also introduced employee engagement programs such as "ideapreneurship" and "value portal" to encourage employees to share their ideas and collaborate with each other. Lastly, he emphasized the importance of transparent communication and created platforms for employees to give feedback and ask questions to build trust and a sense of community.

Nayar wanted to instill a culture of creativity, teamwork, and customer-centricity at HCL Technologies through the implementation of these projects. He thought that the company could achieve sustainable development and compete with larger, international IT services firms by prioritizing its people and giving them the freedom to drive change. HCL Technologies has been recognized as one of the world's fastest-growing providers of IT services because of Nayar's efforts to transform the company's culture.

Learn more about working culture here:

https://brainly.com/question/31187356

#SPJ1

Nayar is renowned for his "Employees First, Customers Second" leadership ethos, which highlighted the significance of empowering and energizing staff in order to foster economic success.

to provide clients, associates, and employees with innovative, professional, and individualized services. We will be sensitive to the requirements of those who will be the focus of our intervention.

HCL. Our vision takes a balanced approach to the three sustainability pillars; economic, environmental, and social At all times, our business practices are founded on commitment to ethical behavior, accountability, transparency, and consideration for the interests of stakeholders.

Learn more about HCL culture:

brainly.com/question/30116882

#SPJ1

The quantity theory of money states that when money in an economy twice, prices will also double, all other things being equal. This implies that for the same amount of products and services, the consumer will spend twice as much.

It implies that there is a mechanical and fixed proportional relationship between changes in the money supply and the overall level of prices. According to the quantity theory of money, inflation and a growth in money supply typically go hand in hand.

In other words, a 20% increase in the money supply will lead to a 20% increase in the price level. Inflation is also related to price level. As a result, an increase of 20% in the money supply causes an increase of 20% in the inflation rate.

To Know more about  consumer

https://brainly.com/question/15869639

#SPJ1

Answer:

Feedback is the information, insights, issues and input shared by the community about their experience with your or someones company, products or services.

Answer:

People in her work department is the answer.

Explanation: