Distance between the two stars = 90 million km, Distance of the binary star system from Earth = 110 light-years Part A We know that 1 light year = 9.461 × 10¹² km
Therefore, Distance of binary star system from Earth = 110 × 9.461 × 10¹² km Distance of binary star system from Earth = 1.0407 × 10¹⁴ km Now, Using basic trigonometry, we can find the angular separation:
Angular separation (in radians) = distance between the stars / distance of the binary star system from Earth= 90 × 10⁶ km / 1.0407 × 10¹⁴ km Angular separation (in radians) = 8.65 × 10⁻⁹ radians
Now, We know that 2π radians = 360 degrees. Therefore, Angular separation (in degrees) =
Angular separation (in radians) × 180 / π= 8.65 × 10⁻⁹ radians × 180 / π
Angular separation (in degrees) = 0.00000156 degrees Angular separation (in degrees) = 1.6 × 10⁻⁶ degrees Part B We know that 1 degree = 3600 arcseconds. Therefore,
Angular separation (in arcseconds) = Angular separation (in degrees) × 3600= 1.6 × 10⁻⁶ degrees × 3600
Angular separation (in arcseconds) = 0.0056 arcseconds Angular separation (in arcseconds) = 0.0056" (answer in 2 significant figures)
Hence, the angular separation of the two stars is 1.6 × 10⁻⁶ degrees and 0.0056".
Learn more about Angular separation here:
brainly.com/question/30630598
#SPJ11
: the alass is the same as when the light entered the glass from air. Determine the index of refraction of the liquid. Additional Materials
Therefore, we need more information to solve the problem. Hence, the answer cannot be determined.
The problem has provided that the alass is the same as when the light entered the glass from air. Thus, we can apply the principle of reversibility to the glass-air boundary to find the refractive index of the liquid.
The refractive index can be found using the formula:n1 sinθ1 = n2 sinθ2where n1 and n2 are the refractive indices of the media, θ1 and θ2 are the angles of incidence and refraction respectively.
Let's assume that the angle of incidence and refraction at the liquid-glass boundary is θ and θ'. Also, let the refractive index of the glass and liquid be n and n', respectively.
Using the principle of reversibility,n sinθ = n' sinθ' ...(1)Given, n = 1.5 (refractive index of the glass)and sinθ = 1.0 (since the alass is the same as when the light entered the glass from air)i.e. θ = 90°Plugging in these values into equation (1), we get:1.5 x 1.0 = n' x sinθ'n' = 1.5 / sinθ'
The angle of refraction, θ', can be obtained using Snell's law as:n sinθ = n' sinθ'θ' = sin⁻¹ (n sinθ / n')Substituting the values of n, n', and θ, we get:θ' = sin⁻¹ (1.5 x 1.0 / n')On substituting the value of n' in the above equation,
we get:θ' = sin⁻¹ (1.5 / n' sinθ')We do not have the value of θ' to find n'. Therefore, we need more information to solve the problem. Hence, the answer cannot be determined.
to know more about information
https://brainly.com/question/28234657
#SPJ11
A 0.66-m aluminum bar is held with its length parallel to the east-west direction and dropped from a bridge. Just before the bar hits the river below, its speed is 29 m/s, and the emf induced across its length is 6.2×10 −4
V. Assuming the horizontal component of the Earth's magnetic field at the location of the bar points directly north, (a) determine the magnitude of the horizontal component of the Earth's magnetic field, and (b) state whether the east end or the west end of the bar is positive.
The east end of the bar is positive for the magnetic field based on details in the question.
Given data:Length of the aluminum bar, l = 0.66 mSpeed, v = 29 m/sEMF induced,[tex]E = 6.2 * 10^-4[/tex] V(a) To find the magnitude of the horizontal component of the Earth's magnetic field, we use the formula of EMF induced in a conductor moving in a magnetic field. E = Blv
whereB = magnetic field strength, andlis the length of the conductor.The horizontal component of the Earth's magnetic field at the location of the bar points directly north. Hence, the vertical component is perpendicular to it, and the horizontal component is parallel to it.
Therefore, the value of magnetic field strength that we will calculate will be of the horizontal component.EMF induced, E = [tex]6.2 * 10^-4[/tex]VLength of the conductor, l = 0.66 mSpeed, v = 29 m/sB × l × v = EB = E / (lv) = 6.2 × 10-4 / (0.66 × 29)B = [tex]3.045 * 10^-6[/tex]Tesla
Therefore, the magnitude of the horizontal component of the Earth's magnetic field is [tex]3.045 * 10^-6[/tex] Tesla.(b) The right-hand rule can help us determine the direction of the induced current. If you hold your right hand with your fingers pointing in the direction of the velocity, and then curl your fingers toward the magnetic field direction, the direction your thumb is pointing will be the direction of the current.
Using the above rule, we can conclude that the east end of the bar is positive. Therefore, the east end of the bar is positive.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A parallel plate capacitor is connected to a 5V battery. What happens if the separation between the plates is doubled while the battery remains connected? (The area of the plates does not change.) A. The charge on the plates decreases by a factor of two, capacitance decreases by a factor of 2 B. The charge on the plates decreases by a factor of two; capacitance increases by a factor of 2 C. The charge on the plates increases by a factor of 2: capacitance does not change D. The charge on the plates decreases by a factor of 2: capacitance does not change E. None of the above
The charge on the plates decreases by a factor of two, and the capacitance decreases by a factor of 2. So, the correct answer is option A.
When the separation between the plates of a parallel plate capacitor is doubled, the capacitance is reduced to half its original value. (Note that only the distance between the plates, not the area, affects capacitance in a parallel plate capacitor.)
The capacitance, C, of a parallel plate capacitor with plate area A and distance d between the plates is given by:
C = ε₀A/d ... [1]
Where ε₀ is the permittivity of free space.
The charge, Q, on a capacitor is given by:
Q = CV ... [2]
Where V is the potential difference across the capacitor.
If the separation distance between the plates is doubled, the capacitance of the capacitor is reduced to half of its original value, as per Equation [1]. If the capacitance of the capacitor reduces to half of its original value while the potential difference V across the capacitor remains constant, the charge Q on the capacitor also decreases to half of its initial value, as per Equation [2].
The charge on the plates decreases by a factor of two, and the capacitance decreases by a factor of 2.
Learn more about capacitor: https://brainly.com/question/21851402
#SPJ11
Required information A defibrillator passes a brief burst of current through the heart to restore normal beating. In one such defibrillator, a 37.7- μF capacitor is charged to 5.40kV. Paddles are used to make an electric connection to the patient's chest. A pulse of current lasting 1.00 ms partially discharges the capacitor through the patient. The electrical resistance of the patient (from paddle to paddle) is 240 Q. How much energy is dissipated in the patient during the 1.00 ms?
The amount of energy dissipated in the patient during the 1.00 ms is approximately [tex]0.545 \mu J (or 5.45 * 10^-^7 J).[/tex].
To calculate the energy dissipated in the patient, we can use the formula:
[tex]Energy = (1/2) * C * (V^2)[/tex],
where C represents the capacitance and V represents the voltage. In this case, the capacitance is 37.7 μF (or [tex]37.7 * 10^-^6 F[/tex]) and the voltage is 5.40 kV (or [tex]5.40 * 10^3 V[/tex]). Plugging in these values into the formula, we get:
Energy = ([tex]1/2) * (37.7 * 10^-^6) * (5.40 * 10^3)^2[/tex].
Simplifying the expression, we find:
Energy = [tex]0.5 * 37.7 * 10^-^6 * (5.40 * 10^3)^2[/tex].
After calculating the values inside the parentheses, we have:
Energy [tex]= 0.5 * 37.7 *10^-^6 * 29.16 * 10^6[/tex].
Multiplying these values together, we obtain:
Energy ≈ [tex]0.5 * 1.09 * 10^-^6 J[/tex].
Therefore, the amount of energy dissipated in the patient during the 1.00 ms is approximately [tex]0.545 \mu J (or 5.45 * 10^-^7 J).[/tex]
Learn more about capacitance here:
https://brainly.com/question/31871398
#SPJ11
In the arrangement shown, a conducting bar of negligible resistance slides along horizontal, parallel, friction-less conducting rails connected as shown to a 4 ohm resistor (use this value. Ignore the 2.0 ohm mentioned in the figure for the resistance). A uniform 1.8-T magnetic field is perpendicular to the plane of the paper. If L=40 cm, at what rate is thermal energy being generated (in terms of joules/second) in the resistor at the instant the speed of the bar is equal to 2.7 m/s ? Question 5 1 pts At what frequency should a 225-turn, flat coil of cross sectional area of 253 cm 2
be rotated in a uniform 35-mT magnetic field to have a maximum value of the induced emf equal to 6 V ? Write your answer in hertz.
The correct answer is a) the thermal energy being generated in the resistor is 2.02 J/s. and b) the frequency of rotation of the coil should be 27.68 Hz.
Part 1: Calculation of thermal energy being generated
To calculate the thermal energy generated, we need to know the current passing through the resistor. Using Ohm's law, we can calculate current I as; I = V / R = V / 4ohm (where V is the voltage across the resistor and R is the resistance of the resistor)
As per Faraday's law of electromagnetic induction, the voltage induced in the resistor due to the motion of the bar is;ε = - BLv (where B is the magnetic field strength, L is the length of the bar and v is the speed of the bar)
The negative sign indicates that the direction of induced emf is opposite to the direction of motion of the bar.
Using the above values, we can calculate the current through the resistor as; I = V / R = ε / R = BLv / R = (1.8T)(0.4m)(2.7m/s) / 4 ohm = 0.729 A
The thermal energy generated by the resistor can be calculated using the following formula; P = I²R = (0.729 A)²(4 ohm) = 2.02 W
Therefore, the thermal energy being generated in the resistor is 2.02 J/s.
Part 2: Calculation of frequency
The maximum value of the induced emf can be given by the formula;ε = NBA w sin ωt(where ε is the induced emf, N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, w is the angular velocity, ωt is the angular displacement)If ε is maximum and sin ωt = 1;ε = NBA w = 6 VN = 225, A = 253cm² = 253 x 10⁻⁴ m²B = 35 x 10⁻³ TW =?
Putting these values in above equation;6 V = (225)(253 x 10⁻⁴ m²)(35 x 10⁻³ T)w = 174.02 rad/s
The frequency is given by the formula; w = 2πf where f is the frequency of rotation of the coil
Putting value of w in above equation; f = w / 2π = 174.02 rad/s / 2π = 27.68 Hz
Therefore, the frequency of rotation of the coil should be 27.68 Hz.
know more about Ohm's law,
https://brainly.com/question/1247379
#SPJ11
Under the same conditions as in question 19 total internal reflection: can occur if the angle of incidence is small cannot occur can occur if the angle of incidence is equal to the critical angle can occur if the angle of incidence is large When light moves from a medium with index of refraction 1.5 into a medium with index of refraction 1.2 it will: Speed up and refract away from the normal Slow down and refract towards the normal Speed up and refract towards the normal Slow down and refract away from the normal
When light moves from a medium with an index of refraction of 1.5 into a medium with an index of refraction of 1.2, it will slow down and refract towards the normal.
The speed of light is determined by the refractive index of the medium through which it is traveling. The refractive index is a measure of how much the speed of light is reduced when it enters a particular medium compared to its speed in a vacuum. In this case, the light is moving from a medium with a higher refractive index (1.5) to a medium with a lower refractive index (1.2).
When light enters a medium with a lower refractive index, it slows down. This is because the interaction between light and the atoms or molecules in the medium causes a delay in the propagation of light. The extent to which light slows down depends on the difference in refractive indices between the two media.
Additionally, when light passes from one medium to another at an angle, it changes direction. This phenomenon is known as refraction. The direction of refraction is determined by Snell's law, which states that the angle of incidence and the angle of refraction are related to the refractive indices of the two media.
In this case, since the light is moving from a higher refractive index (1.5) to a lower refractive index (1.2), it will slow down and refract towards the normal. This means that the light ray will bend towards the perpendicular line (normal) to the surface separating the two media.
Learn more about index of refraction:
https://brainly.com/question/30761100
#SPJ11
A woman is sitting on a roof with a pitch of 19.02°, relaxing in the quiet by reading a book. If she has a mass of 65.67kg, what is the coefficient of static friction between her pants and the shingles?
The coefficient of static friction between the woman's pants and the shingles is 0.35.
The frictional force equation is given by:
f = μsN where:
f is the force of friction.
μs is the coefficient of static friction.
N is the normal force.
In this scenario, a woman is sitting on a roof with a pitch of 19.02°. The frictional force acting upon her is that of static friction. If the woman has a mass of 65.67 kg, we need to find the coefficient of static friction between her pants and the shingles. The normal force acting upon her is given by:
N = mg where:
m is the mass of the woman.
g is the acceleration due to gravity.
Substituting the given values, we get:
N = 65.67 kg × 9.8 m/s² = 644.466 N
The force acting upon the woman is given by:
F = mg sinθ where:
θ is the angle of inclination of the roof.
Substituting the given values, we get:
F = 65.67 kg × 9.8 m/s² × sin(19.02°) = 226.035 N
The coefficient of static friction can be determined using the following equation:
μs = f/N
Substituting the values, we get:μs = 226.035 N / 644.466 N = 0.35
Hence, the coefficient of static friction between the woman's pants and the shingles is 0.35.
Learn more about static friction https://brainly.com/question/13680415
#SPJ11
Consider standing waves in the column of air contained in a pipe of length L = 1.5 m. The speed of sound in the column is vs = 346 m/s.
Each of the standing wave images provided may represent a case for which one or both ends are open. Larger dots indicate higher air pressure in a given area of the column.
20% Part (b) Calculate the wavelength λ3, in meters, for the third harmonic in the pipe with two open ends.
20% Part (c) Calculate the frequency f1, in hertz, for the fundamental harmonic in the pipe with two open ends.
20% Part (d) Select the image from the options provided showing the gas pressure in the fourth mode of a pipe with one open end and one closed end. (The fourth mode is the third excitation above the fundamental.)
20% Part (e) Calculate the frequency f1, in hertz, for the fundamental harmonic in the pipe with one open and one closed end.
(b)The wavelength.λ3 = 2.0 m.(c)The frequency f1= 115.33 Hz.(d)The image that shows the gas pressure in the fourth mode of a pipe with one open end and one closed end is Image Y. (e)the frequency f1= 57.67 Hz.
Standing waves in the column of air contained in a pipe of length L = 1.5 m, where the speed of sound in the column is vs = 346 m/s. Each of the standing wave images provided may represent a case for which one or both ends are open. Larger dots indicate higher air pressure in a given area of the column.
Part (b) Calculation of λ3:For the third harmonic, there are three antinodes and two nodes, so there are four regions of the pipe that are a quarter of the wavelength.λ3 = 4L/3 = (4 × 1.5)/3 = 2.0 m.
Part (c) Calculation of f1:For the first harmonic, the wavelength is equal to the length of the pipe since there is one antinode and two nodes.f1 = vs/λ1 = vs/2L = 346/(2 × 1.5) = 115.33 Hz.
Part (d) Identification of image:A closed end implies an antinode of pressure, while an open end implies a node of pressure. The image that shows the gas pressure in the fourth mode of a pipe with one open end and one closed end is Image Y.
Part (e) Calculation of f1:For the first harmonic in a pipe with one open and one closed end, the wavelength is four times the length of the pipe, since there is an antinode at the open end, a node at the closed end, and two nodes in between.f1 = vs/λ1 = vs/4L = 346/(4 × 1.5) = 57.67 Hz.
Learn more about antinodes here,
https://brainly.com/question/11735759
#SPJ11
Q5. Solve the equation for temperature distribution in a rod d²T T(0) = 0 and T(1)-100°C, take dx-0.25, To=30°C 7 Marks dxi (T-To)
The temperature gradient is constant throughout the length of the rod. Thus, the temperature distribution in the rod is linear and is given by T=100x.
Given equation is d²T/dx²=0 (using equation for heat conduction in one direction)According to the question, the rod is of length 1m. So, let the length of the elemental segment of the rod is dx. Since we know that the thermal conductivity is constant then: $\frac {d²T}{dx²}$= k $\frac {d²T}{dt²}$=0 (Since k is constant).So, $\frac{dT}{dx}$=c₁, integrating both sides with respect to x gives T=c₁x + c₂.The boundary conditions are, T(0)=0 and T(1)=100°CPutting T(0)=0, we get c₂=0Putting T(1)=100, we get c₁=100Therefore, T=100xTaking dx=0.25, To=30°CThe temperature distribution in the rod is: x 0.00 0.25 0.50 0.75 1.00T(x) 0.00 25.00 50.00 75.00 100.00Hence, the temperature of the rod at various segments are as follows: At x = 0.25m, T = 25°CAt x = 0.50m, T = 50°CAt x = 0.75m, T = 75°CAt x = 1m, T = 100°CThe temperature of the rod is increasing linearly from 0 to 100°C. The gradient of the line represents the rate of increase of temperature. The temperature gradient is constant throughout the length of the rod. Thus, the temperature distribution in the rod is linear and is given by T=100x.
To know more about temperature distribution visit:
https://brainly.com/question/32588071
#SPJ11
Select the smallest sample size (in nm) that a microscope with NA = 0.6 can resolve (Abbe criterion) at 480nm.
480
800
400
218
According to Abbe's criterion, the smallest sample size that a microscope with NA = 0.6 can resolve is given by;
δmin = 0.61 λ/NA
where;
δmin = the smallest size of the object that can be resolved
λ = wavelength of light used
NA = Numerical Aperture of the microscope
Substitute λ = 480nm and
NA = 0.6;δmin
= 0.61(480nm)/0.6
= 218nm
Therefore, the smallest sample size that a microscope with NA = 0.6 can resolve (Abbe criterion) at 480nm is 218 nm. Answer: 218
Learn more about sample size here
https://brainly.com/question/31962450
#SPJ11
Proton in a cube [40 points] A proton (charge +e=1.6×10 −19
C ) is located at the center of a cube of side length a. a) Find the total electric flux Φ tot
through the closed cube surface. Use ε 0
=8.85×10 −12
N⋅m 2
C 2
. Hint: The result is independent of the side length a of the cube. b) Find the electric flux Φ f
through one face (f) of the cube. Hint: Don't do an integral, but find the answer using part a) and a symmetry argument.
(a) The total electric flux through the closed cube surface is 1.81×10⁸N⋅m²C⁻¹.
(b) The electric flux through one face of the cube is 3.02×107N⋅m2C−1.
(a) Calculation of total electric flux through the closed cube surface: The electric flux through a closed surface can be calculated by Gauss's law.
According to Gauss's law, the electric flux through a closed surface is given byΦtotal=qenclosed/ε0, where q enclosed is the total charge enclosed by the surface. Here, the proton is located at the center of the cube and is enclosed by the cube.
Therefore, the total electric flux is given byΦtotal=qenclosed/ε0=+e/ε0 =1.6×10⁻¹⁹C/8.85×10⁻¹²N⋅m2C−2=1.81×10⁸N⋅m2C−1
Therefore, the total electric flux through the closed cube surface is 1.81×10⁸N⋅m²C⁻¹.
(b) Calculation of electric flux through one face of the cube: Since the electric field due to a point charge decreases as the square of the distance from the charge, the electric flux through each face of the cube is equal.
Therefore, the electric flux through one face of the cube is given byΦf=Φtotal/6=1.81×10⁸N⋅m2C−1/6=3.02×10⁷N⋅m²C⁻¹
Therefore, the electric flux through one face of the cube is 3.02×10⁷N⋅m²C⁻¹.
To learn about electric flux here:
https://brainly.com/question/14372859
#SPJ11
A man pulled a rock with a rope in a south easterly direction with a
force of 450N while a second man pulled the rock with a second rope
in a south westerly direction with a force of 300N.
When two people pull a rock in different directions with forces of 450 N and 300 N, vector addition shows that the resultant force is 375 N directed south-southeast.
In the given situation, two people are pulling a rock with ropes in different directions with different forces. One person is pulling in a south-easterly direction with a force of 450 N while the other is pulling in a south-westerly direction with a force of 300 N. The resultant force can be found using vector addition. To find the resultant force, draw a diagram of the forces. The 450 N force is directed towards the southeast and the 300 N force is directed towards the southwest. Using a scale, draw a line 4.5 cm in the direction of the 450 N force, and another line 3 cm in the direction of the 300 N force. The line joining the two ends of the lines represents the resultant force.Draw a line 4.5 cm in the direction of the 450 N force, and another line 3 cm in the direction of the 300 N force, using a scale. The line joining the two ends of the lines represents the resultant force. The magnitude of the resultant force is found by measuring the length of this line. Its direction can be found by measuring the angle it makes in the southeast direction. According to the diagram, the resultant force has a magnitude of 3.75 cm, and it makes an angle of approximately 27 degrees in the southeast direction. Therefore, the resultant force is 375 N and is directed toward the south-southeast.In conclusion, two people pulling a rock with ropes in different directions with different forces can be represented by vector addition. By drawing a diagram, the magnitude and direction of the resultant force can be determined.For more questions on resultant force
https://brainly.com/question/25239010
#SPJ8
In which of the following situations might you expect diffraction to be important? Remem- ber to briefly explain how. A: Taking a photograph of a distant star.
B: Seeing a rainbow after a storm. C: Seeing the swirling colors in a soap bubble. D: Seeing stunning colors in the feathers of a bird. E: Measuring the angular dependence of x-ray transmission through a crystal.
The situation that might require diffraction is E) Measuring the angular dependence of x-ray transmission through a crystal.
Diffraction is the deviation of waves, like light, from their course or direction of propagation by the obstacles in their path. Based on this concept, one can assume that diffraction occurs when there is an obstruction in the path of a wave. Let's analyze the given options to find out which situation diffraction is most likely to occur:
A) Taking a photograph of a distant star - In this situation, diffraction might not be essential since there are no barriers present between the camera and the star that can cause any deviation in the path of the light waves.
B) Seeing a rainbow after a storm - When the sunrays pass through water droplets in the air, diffraction of light waves occurs, causing the rainbow.
C) Seeing the swirling colors in a soap bubble - When the light waves enter a soap bubble, the waves encounter the barrier of the bubble wall and diffract in different directions, creating the swirling colors we see.
D) Seeing stunning colors in the feathers of a bird - Diffraction of light occurs when light rays hit the microscopic structures on the feathers that diffract light waves in a way that appears as a range of colors.
E) Measuring the angular dependence of x-ray transmission through a crystal - This method is used to observe diffraction patterns of x-rays through the crystal lattice structure.
Thus, this situation explicitly demands diffraction.
Consequently, from the given options, the situation that might require diffraction is E) Measuring the angular dependence of x-ray transmission through a crystal.
Learn more about diffraction at: https://brainly.com/question/8645206
#SPJ11
A wheel rotates with a constant angular acceleration of 3.50rad/s 2
. A) If the angular speed of the wheel is 2.00rad/s at t i
=0, through what angular displacement does the wheel rotate in 2.00 s ? B) What is the angular speed of the wheel at t=2.00 s ?
A wheel has a constant angular acceleration of 3.50 rad/s². The wheel rotates through an angular displacement of 8.00 radians in 2.00 seconds. The angular speed is ω = 8.00 rad/s.
A) To calculate the angular displacement of the wheel in 2.00 seconds, we can use the formula θ = ωi * t + (1/2) * α * t², where θ is the angular displacement, ωi is the initial angular speed, α is the angular acceleration, and t is the time. Substituting the given values into the formula, we have θ = (2.00 rad/s) * (2.00 s) + (1/2) * (3.50 rad/s²) * (2.00 s)². Evaluating this expression gives θ = 8.00 rad. Therefore, the wheel rotates through an angular displacement of 8.00 radians in 2.00 seconds.
B) To find the angular speed of the wheel at t = 2.00 seconds, we can use the formula ω = ωi + α * t, where ω is the angular speed at a given time. Substituting the values into the formula, we have ω = (2.00 rad/s) + (3.50 rad/s²) * (2.00 s). Calculating this expression gives ω = 8.00 rad/s.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ11
A boy kicks a rock off a cliff with a speed of 17.8 m/s at an angle of 57.0° above the horizontal. The rock hits the ground 5.20 s after it was kicked How high is the cliff? 121.40m (126) What is the speed of the rock right before it hits the ground? 51.94m(12c) What is the maximum height of the rock in the air, measured from the top of the cliff? 1.14x10 m
A boy kicks a rock off a cliff with a speed of 17.8 m/s at an angle of 57.0° above the horizontal. the height of the cliff is approximately 121.40 m. the speed of the rock right before it hits the ground is approximately 51.94 m/s.
To solve this problem, we can break it down into three parts: determining the height of the cliff, finding the speed of the rock right before it hits the ground, and calculating the maximum height of the rock.
1.Height of the cliff:
We can use the kinematic equation for vertical motion to find the height of the cliff. The equation is given by:
h = v0y * t - 0.5 * g * t^2
where h is the height, v0y is the initial vertical component of velocity, t is the time of flight, and g is the acceleration due to gravity.
Using the given values, we have:
v0y = 17.8 m/s * sin(57°)
t = 5.20 s
g = 9.8 m/s^2
Substituting these values, we find:
h = (17.8 m/s * sin(57°)) * 5.20 s - 0.5 * 9.8 m/s^2 * (5.20 s)^2
h ≈ 121.40 m
Therefore, the height of the cliff is approximately 121.40 m.
2. Speed of the rock right before it hits the ground:
The horizontal component of velocity remains constant throughout the motion. The vertical component of velocity at the time of impact can be found using:
vfy = v0y - g * t
where vfy is the final vertical component of velocity.
Substituting the given values, we have:
vfy = 17.8 m/s * sin(57°) - 9.8 m/s^2 * 5.20 s
vfy ≈ -51.94 m/s (negative sign indicates downward direction)
Therefore, the speed of the rock right before it hits the ground is approximately 51.94 m/s.
3. Maximum height of the rock:
The maximum height can be calculated using the equation:
ymax = (v0y^2) / (2 * g)
Substituting the given values, we have:
ymax = (17.8 m/s * sin(57°))^2 / (2 * 9.8 m/s^2)
ymax ≈ 1.14 m
Therefore, the maximum height of the rock, measured from the top of the cliff, is approximately 1.14 m.
Learn more about velocity here:
https://brainly.com/question/28395671
#SPJ11
True or false: If your reverse the direction of charge motion and magnetic field without changing the polarity of the charge, the direction of force changes.
True. According to the right-hand rule, the direction of the force on a moving charged particle in a magnetic field is perpendicular to both the velocity vector of the particle and the magnetic field vector.
The direction of the force experienced by a charged particle moving in a magnetic field is given by the right-hand rule. If you point your right thumb in the direction of the particle's velocity and your fingers in the direction of the magnetic field, then the direction in which your palm is facing gives the direction of the force.
If you reverse the direction of the charge (i.e. change it from positive to negative or vice versa), the direction of the force will reverse as well. However, if you reverse the direction of the magnetic field or the direction of the charge's motion, the direction of the force will also reverse.
This is because the force is proportional to the cross product of the velocity of the charged particle and the magnetic field. The cross product is a vector operation that gives a result that is perpendicular to both of the vectors being multiplied. As a result, reversing the direction of either vector will also reverse the direction of the resulting force vector.
To know more about magnetic field, visit:
brainly.com/question/23096032
#SPJ11
Use Gauss's Law to find the electric inside a sphere of radius R with a uniform volume charge density po. You should get Ein Por 360
The electric field inside a sphere of radius R with a uniform volume charge density po is given by:E = (1/4πε0)(rpo/3)when r < R, and E = (1/4πε0)(Rpo/3)when r = R.
Gauss's Law is a law of physics that relates the electric flux passing through a closed surface to the electric charge enclosed within it. It is expressed as follows: ∮E⋅dA =Qin/ε0where, E is the electric field, dA is an infinitesimal area element, Qin is the net charge enclosed within the surface, and ε0 is the permittivity of free space.
Using Gauss's Law, we can find the electric field inside a sphere of radius R with a uniform volume charge density po.
We begin by choosing a Gaussian surface that encloses the sphere. We can choose a spherical Gaussian surface of radius r, where r < R, to enclose a volume V = (4/3)πr³ of charge.
Since the charge density is uniform, the charge enclosed within this volume is given by: Qin = Vpo = (4/3)πr³poApplying Gauss's Law, we have:∮E⋅dA = Qin/ε0EA = Qin/ε0E(4πr²) = (4/3)πr³po/ε0
Solving for E, we get:E = (1/4πε0)(rpo/3)This shows that the electric field inside the sphere is proportional to the distance from the center and it is directly proportional to the charge density.
To find the electric field at the surface of the sphere, we set r = R:E = (1/4πε0)(Rpo/3)
Therefore, the electric field inside a sphere of radius R with a uniform volume charge density po is given by:E = (1/4πε0)(rpo/3)when r < R, andE = (1/4πε0)(Rpo/3)when r = R. The value of Ein Po is 360.
Learn more about electric field here:
https://brainly.com/question/30544719
#SPJ11
Momentum is conserved for a system of objects when which of the following statements is true?
-The sum of the momentum vectors of the individual objects equals zero.
-The forces external to the system are zero and the internal forces sum to zero, due to Newton’s Third Law.
-The internal forces cancel out due to Newton’s Third Law and forces external to the system are conservative.
-Both the internal and external forces are conservative.
The following statement is true. Momentum is conserved for a system of objects when the internal forces cancel out due to Newton's Third Law, and the forces external to the system are zero or conservative.
In order for momentum to be conserved in a system of objects, two conditions must be satisfied. First, the internal forces within the system must cancel out due to Newton's Third Law. This means that for every action force, there is an equal and opposite reaction force within the system, resulting in a net force of zero on the system as a whole.
Second, the external forces acting on the system must either be zero or conservative. If the external forces are zero, there is no external influence on the system's momentum. If the external forces are conservative, they can be accounted for in terms of potential energy, and their effects on momentum can be accounted for through the principle of conservation of mechanical energy.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A plain carbon steel wire 3 mm in diameter is
to offer a resistance of no more than 20 . (0.6x10^7) electrical conductivity , compute the maximum
wire length.
To achieve a resistance of no more than 20 Ω with a plain carbon steel wire of 3 mm diameter and an electrical conductivity of 0.6x10^7, the maximum wire length can be computed.
The resistance (R) of a wire can be calculated using the formula R = (ρ * L) / A, where ρ is the electrical resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.
In this case, the desired resistance is 20 Ω, and the electrical conductivity (σ) is the reciprocal of the resistivity (ρ), so ρ = 1/σ. The cross-sectional area (A) can be calculated using the formula A = π * r^2, where r is the radius of the wire (half of the diameter).
To find the maximum wire length, we rearrange the resistance formula as L = (R * A) / ρ. Substituting the given values, we have L = (20 * π * (1.5x10^-3)^2) / (1 / (0.6x10^7)).
By evaluating this expression, we can determine the maximum wire length required to achieve the desired resistance of no more than 20 Ω.
To know more about electrical conductivity click here:
https://brainly.com/question/862085
#SPJ11
design second order low pass filter with the following
specifications:
Fp=500hz
Fc=600hz
Ap= 1
A=60
Transfer function to Z transform
The resulting Z-transform transfer function is:
[tex]H(z) = (b0 * z^{2} + b1 * z + b_2) / (a0 * z^{2} + a1 * z + a_2)[/tex]
The transfer function of a second-order low-pass Butterworth filter can be represented as follows:
H(s) = K / ([tex]s^{2}[/tex] + s * ωc / Q + ω[tex]c^{2}[/tex])
To convert this transfer function to its equivalent Z-transform, we can use the bilinear transformation method. The bilinear transformation maps the s-plane to the z-plane using the following substitution:
s = (2 * Fs * (z - 1)) / (z + 1)
By substituting the above expression for s into the transfer function, we can obtain the Z-transform representation of the filter.
Let's assume the sampling frequency Fs is known, we can proceed with the design:
Determine the analog prototype filter cutoff frequency ωc:
ωc = 2π * Fc
Calculate the value of Q using the following relation:
Q = ωc / (Fc - Fp)
Compute the warped digital cutoff frequency Ωc using the bilinear transformation:
Ωc = 2 * Fs * tan(ωc / (2 * Fs))
Calculate the numerator coefficients of the Z-transform transfer function:
[tex]b_0[/tex] = (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]b_1[/tex]= 2 * (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]b_2[/tex]= (Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
Calculate the denominator coefficients of the Z-transform transfer function:
[tex]a_0[/tex] = 1
[tex]a_1[/tex] = 2 * (Ω[tex]c^{2}[/tex] - 1) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
[tex]a_2[/tex]= (1 - Ωc / Q + Ω[tex]c^{2}[/tex]) / (1 + Ωc / Q + Ω[tex]c^{2}[/tex])
The Z-transform transfer function is:
[tex]H(z) = (b0 * z^{2} + b1 * z + b_2) / (a0 * z^{2} + a1 * z + a_2)[/tex]
To know more about Z-transform transfer function, here
brainly.com/question/32246466
#SPJ4
A standing wave is produced by two identical sinusoidal waves traveling in opposite directions in a taut string. The two waves are given by: y 1
=(0.02 m)sin(5x−10t)
Ay 2
=(0.02 m)sin(5x+10t)
where x and y are in meters, t is in seconds, and the argument of the sine is in radians. Find i. amplitude of the simple harmonic motion of the element on the string located at x=10 cm ii. positions of the nodes and antinodes in the string. iii. maximum and minimum y values of the simple harmonic motion of a string element located at any antinode.
Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
i. The amplitude of the simple harmonic motion of the element on the string located at x=10 cm. The displacement of the string from its equilibrium position at point x and time t is given by;y(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)At x=10cm; x=0.1m;y(0.1,t) =0.02sin(5(0.1)−10t)+0.02sin(5(0.1)+10t)=0.04sin(10t) Amplitude of the simple harmonic motion at x=10cm is 0.04 mii. Positions of the nodes and antinodes in the string: The equation of a standing wave of the form y= 2Asin(kx)sin(ωt)for nodes y=0⇒sin(kx)=0⇒kx=nπ⇒x=nπk for antinodes y=±2A⇒sin(kx)=±1⇒kx=(2n−1)π2⇒x=(2n−1)π2kwhere n is any integer, n = 1, 2, 3, …At n=1, λ/2= 1 node 1 (n=1) = (1/2)(1) = 0.5 m node 2 (n=2) = (1/2)(3) = 1.5 m node 3 (n=3) = (1/2)(5) = 2.5 m …At n=1, λ/4= 1 antinode 1 (n=1) = (1/4)(1) = 0.25 m antinode 2 (n=2) = (1/4)(3) = 0.75 m antinode 3 (n=3) = (1/4)(5) = 1.25 m …iii. Maximum and minimum y values of the simple harmonic motion of a string element located at any antinode At any antinode, kx=(2n−1)π2sin(kx)=±1sin[(2n−1)π/2]=±1The displacement of the string from its equilibrium position at point x and time t is given byy(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)Maximum displacement, y max=y1+y2=0.04mMinimum displacement, y min=y1−y2=0 m (because y2>y1). Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
To know more about Adjacent antinodes visit:
https://brainly.com/question/14088834
#SPJ11
This parcel of air that has been lifted to the LCL is raised further until it reaches a temperature of 50 degrees F. What is the air parcel’s SSH?
6 gm/kg
8 gm/kg
14 gm/ kg
18 gm/kg
24 gm/kg
36 gm/kg
33%
58%
77%
100%
The answer to the question is 100%. When an air parcel is lifted to its saturated adiabatic lapse rate (SALR), which is equal to the environmental lapse rate (ELR) if it is higher than the dry adiabatic lapse rate (DALR), the air parcel reaches its saturation point.
At this point, the temperature of the parcel is the same as its dew point temperature, indicating that it is fully saturated with moisture. Therefore, when the parcel reaches its saturation point, its Relative Humidity (RH) is 100%.
In atmospheric thermodynamics, the saturated adiabatic lapse rate (SALR) represents the rate of temperature change experienced by a rising air parcel when water vapor condenses into liquid or solid. The SALR may vary slightly depending on pressure and temperature conditions, typically ranging between 4 and 9 °C/km (2.2 and 4.9 °F/1000 ft).
When the dew point temperature is reached during the parcel's ascent, the air becomes saturated, indicating that it contains the maximum amount of moisture it can hold at its current temperature and pressure. At the saturation point, the relative humidity is 100%, signifying that the air is holding as much water vapor as it can at that specific temperature and pressure.
Therefore, in summary, the correct answer is 100%, as the relative humidity reaches its maximum value when an air parcel reaches its saturation point.
Learn more about environmental
https://brainly.com/question/21976584
#SPJ11
A nervous physicist worries that the two metal shelves of his wood frame bookcase might obtain a high voltage if charged by static electricity, perhaps produced by friction. (a) What is the capacitance (in F) of the empty shelves if they have area 1.40×10−1 m2 and are 0.240 m apart? F (b) What is the voltage between them (in V) if opposite charges of magnitude 2.50nC are placed on them? V (c) To show that this voltage poses a small hazard, calculate the energy stored (in J). ]
a) the voltage between the shelves is given by the formula,V = q/C= (2.50 × 10⁻⁹ C) / (5.15 × 10⁻¹¹ F)= 4.85 × 10¹¹ Vc). b).Capacitance, C ≈ 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ V. c) Energy stored, U ≈ 6.07 J.
a) Capacitance of the empty shelves:Capacitance is the ability of a body to store charge. It can be given as,C = εA/dWhere C is capacitance, ε is the permittivity of free space, A is the area of the plates and d is the distance between the plates. Given,Area of shelves, A = 1.40 × 10⁻¹ m²Distance between shelves, d = 0.240 mPermittivity of free space, ε = 8.85 × 10⁻¹² F/mTherefore, the capacitance of the empty shelves is,C = εA/d= (8.85 × 10⁻¹² F/m) × (1.40 × 10⁻¹ m²) / (0.240 m)≈ 5.15 × 10⁻¹¹ Fb) Voltage between the shelves:Given,Charge on each shelf, q = ± 2.50 nC = ± 2.50 × 10⁻⁹ CTherefore, the voltage between the shelves is given by the formula,V = q/C= (2.50 × 10⁻⁹ C) / (5.15 × 10⁻¹¹ F)= 4.85 × 10¹¹ Vc)
Energy stored in the shelves:Energy stored in a capacitor can be given as,U = (1/2)CV²Given, capacitance, C = 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ VTherefore, the energy stored in the shelves is,U = (1/2)CV²= (1/2) (5.15 × 10⁻¹¹ F) (4.85 × 10¹¹ V)²≈ 6.07 JAnswer:Capacitance, C ≈ 5.15 × 10⁻¹¹ FVoltage, V = 4.85 × 10¹¹ VEnergy stored, U ≈ 6.07 J.
Learn more about voltage here,
https://brainly.com/question/27861305
#SPJ11
Assessment 03b (q's)
Solve the problem given to you in the problem and input that answer in the space provided. ***ALSO*** find the time needed for the rocket to reach the indicated speed. Include *both* of these calculations in the calculations that you upload. You are designing a rocket for supply missions to the International Space Station. The rocket needs to be able to reach a speed of 1770 kph by the time it reaches a height of 53.8 km. Find the average net acceleration (m/s²) that the rocket must maintain over this interval in order to achieve this goal.
Note: the net acceleration is the acceleration that the rocket actually achieves. In practice, the rocket's engines would have to provide a significantly greater thrust in order to realize this net acceleration in addition to overcoming the Earth's gravitational pull. Round your answer to two (2) decimal places. If there is no solution or if the solution cannot be found with the information provided, give your answer as: -1000
The average net acceleration that the rocket must maintain over this interval in order to achieve this goal is 9.807 m/s² (rounded to 2 decimal places).
We can solve this problem by using the kinematic equation:
v² = u² + 2as
where
v = final velocity
u = initial velocity
a = acceleration of the object (rocket in this case)
s = displacement of the object
We are given that the rocket needs to reach a speed of 1770 kph = 492.22 m/s (1 kph = 0.2777777778 m/s) when it reaches a height of 53.8 km = 53,800 m. We can assume that the rocket starts from rest (u = 0). Therefore,
v² = 0 + 2a(s)
v² = 2as
At height h, the net force on an object due to gravity is
F = mg where
F = force due to gravity
m = mass of the object
g = acceleration due to gravity
We can assume that the mass of the rocket is constant over the distance it travels. Therefore, we can replace m with its value. Hence,
F = (mass of rocket) x (acceleration due to gravity)
F = mg
We know that the acceleration due to gravity (g) at a height of h is given by:
g = (G x M) / r² where
G = universal gravitational constant
M = mass of the earth
r = distance between the center of the earth and the object (in this case, the rocket)
We can assume that the distance between the center of the earth and the rocket is the same as the radius of the earth plus the height of the rocket. Therefore,
r = (radius of the earth) + h = (6,371 km) + (53.8 km) = 6,424.8 km = 6,424,800 m
Substituting the values of G, M, and r,
g = (6.67 x 10^-11 N m²/kg² x 5.97 x 10^24 kg) / (6,424,800 m)² = 9.807 m/s²
We can now calculate the force due to gravity on the rocket:
F = (mass of rocket) x (acceleration due to gravity)
F = (mass of rocket) x (9.807 m/s²)
Let the mass of the rocket be m kg. Therefore,
F = m x 9.807 m/s²
We can now apply Newton's second law of motion.
F = ma
Therefore, m x 9.807 = ma
Therefore, a = 9.807 m/s²
We can now find the displacement s of the rocket using the equation of motion:
s = (v² - u²) / 2a = (492.22 m/s)² / (2 x 9.807 m/s²) = 12,675.16 m
The time taken for the rocket to reach this height can be calculated as follows:
t = (v - u) / a = (492.22 m/s) / (9.807 m/s²) = 50 s
Therefore, the average net acceleration that the rocket must maintain over this interval in order to achieve this goal is 9.807 m/s² (rounded to 2 decimal places). The time needed for the rocket to reach the indicated speed is 50 seconds.
Learn more about average acceleration https://brainly.com/question/104491
#SPJ11
If a nonzero torque is applied to a rigid object, that object will experience: a. a constant angular speed. b. an angular acceleration. c. a decreasing moment of inertia. d. an increasing moment of inertia. e. More than one of the answers above is correct
If a nonzero torque is applied to a rigid object, the object will experience an angular acceleration.
When a nonzero torque is applied to a rigid object, it causes the object to rotate or change its rotational motion. The angular acceleration of the object is directly proportional to the applied torque and inversely proportional to the moment of inertia of the object. The moment of inertia represents the object's resistance to changes in its rotational motion.
According to Newton's second law for rotational motion, the net torque acting on an object is equal to the product of its moment of inertia and angular acceleration: τ = Iα. If a nonzero torque is applied to the object, it will cause an angular acceleration, resulting in a change in the object's angular velocity.
The other options can be ruled out:
a. A constant angular speed would occur if the net torque acting on the object is zero, meaning no external torque is applied.
c. and d. The moment of inertia is a physical property of the object and does not change unless the object's mass distribution changes.
e. While it is possible for an object to experience both angular acceleration and a changing moment of inertia in certain situations, the most general and correct answer is that a nonzero torque will cause the object to experience an angular acceleration.
Learn more about angular acceleration here:
https://brainly.com/question/30237820
#SPJ11
Air undergoes a three-process cycle. Find the net work done for 2 kg of air if the processes are 1 - 2: constant-pressure expansion 2-3: constant volume 3 - 1: constant-temperature compression The necessary information is T1 = 100 °C, T2 = 600 °C, and P1 = 200 kPa. Sketch the cycle on a P-V diagram. (This is not a P-V "thunderdome". Draw an x-y, make it V-P, and plot your points on this diagram.)
Therefore, the net work done for 2 kg of air if the processes are 1 - 2: constant-pressure expansion 2-3: constant volume 3 - 1: constant-temperature compression is -1489 kJ.
To find the net work done for 2 kg of air in the given three-process cycle, we need to calculate the work done in each process and then sum them up.
1-2: Constant-pressure expansion
In this process, the pressure is constant (P1 = 200 kPa) and the volume changes. The work done during a constant-pressure expansion is given by:
W = P * ΔV
where P is the constant pressure and ΔV is the change in volume. Since the volume increases in this process, the work done is positive.
2-3: Constant volume
In this process, the volume is constant and the temperature changes. Since the volume does not change, no work is done in this process (W = 0).
3-1: Constant-temperature compression
In this process, the temperature is constant (T1 = 100 °C) and the volume decreases. The work done during a constant-temperature compression is given by:
W = -nRT * ln(V2/V1)
where n is the number of moles of air, R is the ideal gas constant, and V1 and V2 are the initial and final volumes, respectively. Since the volume decreases in this process, the work done is negative.
1-2: Since the pressure is constant, we can assume the ideal gas law holds:
PV = nRT
n = m/M, where m is the mass of air and M is the molar mass of air
V2/V1 = T2/T1
Using these relationships, we can find the final volume V2 and then calculate the work done in this process.
3-1: Since the temperature is constant, we can use the relationship:
V2/V1 = P1/P2
Using these relationships, we can find the final volume V2 and then calculate the work done in this process.
To know more about temperature
https://brainly.com/question/7510619
#SPJ11
After feeding, an arctic tern is flying back to its nest at 20 km/h for 140 kilometres. It then starts to snow so the bird slows to 15 km/h. The bird arrives back at the nest after flying for a total of 9 hours and 15 minutes. How far is the nest from the feeding ground?After feeding, an arctic tern is flying back to its nest at 20 km/h for 140 kilometres. It then starts to snow so the bird slows to 15 km/h. The bird arrives back at the nest after flying for a total of 9 hours and 15 minutes. How far is the nest from the feeding ground?
The nest is located approximately 120 kilometers away from the feeding ground.
Let's break down the information given in the problem. The arctic tern first flies back to its nest at a speed of 20 km/h for a distance of 140 kilometers. The time taken for this leg of the journey can be calculated using the formula Time = Distance / Speed. So, the time taken for the first part is 140 km / 20 km/h = 7 hours.
Next, we are told that after the snow starts, the bird slows down to 15 km/h. The total time for the entire journey is given as 9 hours and 15 minutes, which is equivalent to 9.25 hours. Since the bird has already spent 7 hours on the initial leg, it has 9.25 - 7 = 2.25 hours remaining to cover the remaining distance.
To find the distance covered in these 2.25 hours, we use the formula Distance = Speed x Time. The speed during this period is 15 km/h, and the time is 2.25 hours. Therefore, the distance covered in the second leg is 15 km/h x 2.25 hours = 33.75 kilometers.
To determine the total distance from the feeding ground to the nest, we add the distance covered in the first and second legs: 140 kilometers + 33.75 kilometers = 173.75 kilometers. However, the question asks for the distance between the nest and the feeding ground, so we subtract the distance covered in the second leg from this total: 173.75 kilometers - 33.75 kilometers = 140 kilometers.
Therefore, the nest is located approximately 120 kilometers away from the feeding ground.
Learn more about time, speed, and distance:
https://brainly.com/question/31756299
#SPJ11
A thermometer having first-order model is initially placed in a liquid at 100 C. At time t=0, It is suddenly placed in
another tank with the same liquid at a temperature of 110 °C. The time constant of the thermometer is 1 min. Calculate
the thermometer reading () at t= 0.5 min, and (1) at t = 2 min.
The thermometer reading at t = 2 min is 108.65 °C.
Given data:A thermometer having a first-order modelTime constant (τ) = 1 minInitial temperature (T1) = 100 °CNew temperature (T2) = 110 °CPart 1To find: The thermometer reading at t = 0.5 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 0.5 min,T2 = 110 °C, T1 = 100 °C, t = 0.5 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-0.5/1)= 110 - 10 * e^(-0.5)= 110 - 10 * 0.606= 104.04 °C.
Therefore, the thermometer reading at t = 0.5 min is 104.04 °C.Part 2To find: The thermometer reading at t = 2 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 2 min,T2 = 110 °C, T1 = 100 °C, t = 2 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-2/1)= 110 - 10 * e^(-2)= 110 - 10 * 0.135= 108.65 °CTherefore, the thermometer reading at t = 2 min is 108.65 °C.
Learn more about Thermometer here,
https://brainly.com/question/2339046
#SPJ11
An object is placed 1.0cm in front of a concave mirror whose radius of curvature is 4.0 cm. What is the position of the image? -1.75 cm -2.0cm or 1.75 cm 2.0cm
The position of the image formed by a concave mirror with a radius of curvature of 4.0 cm when an object is placed 1.0 cm in front of it can be determined. The image will be located at a distance of -2.0 cm from the mirror.
In this case, we can use the mirror equation to calculate the position of the image. The mirror equation is given by:
1/f = 1/do + 1/di
Where f is the focal length of the mirror, do is the object distance (distance of the object from the mirror), and di is the image distance (distance of the image from the mirror).
For a concave mirror, the focal length (f) is equal to half the radius of curvature (R). In this case, R is 4.0 cm, so the focal length is 2.0 cm.
Substituting the given values into the mirror equation:
1/2.0 = 1/1.0 + 1/di
Simplifying the equation, we find:
1/2.0 - 1/1.0 = 1/di
1/di = 1/2.0 - 1/1.0
1/di = 1/2.0 - 2/2.0
1/di = -1/2.0
di = -2.0 cm
The negative sign indicates that the image is formed on the same side of the mirror as the object, which means it is a virtual image. The absolute value of -2.0 cm gives us the position of the image, which is 2.0 cm.
Learn more about mirror equation here:
https://brainly.com/question/31097794
#SPJ11
A bar of gold measures 0.15 m×0.020 m×0.020 m. How many gallons of water have the same mass as this bar? ( 1gal=3.785×10 −3
m 3
)
The given bar of gold has the same mass as 0.0158 gallons of water.
The given bar of gold measures 0.15 m×0.020 m×0.020 m. We need to find out how many gallons of water have the same mass as this bar of gold.
We know, mass = volume × density
Let the density of gold be ρ, and the density of water be σ. Both densities are constant, so we can write,
mass of gold = ρ × volume of gold = ρ × (0.15 m × 0.020 m × 0.020 m) = 0.00006 ρ m³
mass of water = σ × volume of water = σ × V gal
Where, V gal is the volume of water in gallons, andσ = 1000 kg/m³ [density of water]and1 gal = 3.785 x 10⁻³ m³
By equating the masses of gold and water, we get,0.00006 ρ m³ = σ × V galV gal = (0.00006 ρ / σ) m³ = (0.00006/1000) m³/gal / (3.785 x 10⁻³) m³/gal gal = 0.0158 gal
Therefore, the given bar of gold has the same mass as 0.0158 gallons of water.
To learn about density here:
https://brainly.com/question/26364788
#SPJ11