Answer:
You have to apply more pressure to the pedal so more gas runs through the car allowing it to reach higher speeds
To move, a car or any other object must be accelerated from rest to the desired speed; this necessitates that the engine force be greater than the friction force. The net force must be zero once the car is moving at constant velocity; otherwise, the car will accelerate (gain speed).
What forces act on a car at constant speed?All forces acting on a car moving at a constant speed (uniform motion) are balanced. In this case, the two opposing backward forces (air resistance and friction) perfectly balance the applied force of the wheels on the road.When we say constant speed, we mean that a body or object moves at a constant change in distance over time. For example, if we are walking in a straight line at 1 step per second, we can say we are moving at a constant speed. Our acceleration is equal to zero in this case.To learn more about : Speed
Ref : https://brainly.com/question/4931057
#SPJ2
A 3000 kg car stops at a red light, and is rear-ended by a 5000 kg truck traveling at 20m/s. In the collision, the two cars stick together. What is the final speed of the two cars just after the collision in m/s (Numeric Answers only)
Explanation:
this is actually not as simple as it sounds here.
quite some energy is lost in the deformation of the bodies of car and truck, and it also needs more energy to get a standing object going than to accelerate an already moving object.
but assuming the simple described circumstances, then the energy and impulse of the moving truck of 5000 kg is transferred to a new combined system of car and truck of now 5000 + 3000 = 8000 kg.
so, the 20m/s inertia energy of the truck is now distributed to the truck/car combination.
since the same energy has to move now more mass, it is clear that the combined speed will be lower.
20×5000 = x×8000
20×5 = x×8
x = 100/8 = 12.5 m/s
that is the resulting speed of the combined truck/car object.
Shearing is done in case of Processing of __________ ( Silk / Wool / Jute ).
Answer:
wool maybe, I was a bit confused in silk and wool but wool
What was the initial speed of a car if its speed is 40 m/s after 5 seconds of
accelerating at 4 m/s27
A. 10 m/s
B. 60 m/s
C. 20 m/s
D. 25 m/s
Reset Selection
Convright 2010_2021 edtell LLC All rights reserved. Portions of this software are copyrighted by other parties as described in the Acknowledgments.se
Answer:
[tex]\boxed {\boxed {\sf C. \ 20 \ m/s }}[/tex]
Explanation:
We are asked to find the initial speed of a car.
We are given the final speed, the time, and the acceleration, so we will use the following kinematic equation:
[tex]v_f=v_i+at[/tex]
We know the final speed is 40 meters per second, the acceleration is 4 meters per second squared, and the time is 5 seconds.
[tex]v_f[/tex]= 40 m/s t= 5 s a= 4 m/s²Substitute the values into the formula.
[tex]40 \ m/s = v_i+(4 \ m/s^2 * 5 \ s)[/tex]
Multiply inside the parentheses.
[tex]40 \ m/s =v_i+ 20 \ m/s[/tex]
We are solving for the initial speed, so we must isolate the variable [tex]v_i[/tex].
20 meters per second is being added to [tex]v_i[/tex]. The inverse operation of addition is subtraction. Subtract 20 m/s from both sides of the equation.
[tex]40 \ m/s - 20 \ m/s = v_i + 20 \ m/s - 20 \ m/s[/tex]
[tex]40 \ m/s - 20 m/ s = v_i[/tex]
[tex]20 \ m/s=v_i[/tex]
The initial speed of the car is 20 meters per second and choice C is correct.
Explain why two acetate rods, both charged with silk repel
8. What is the kinetic Energy of the 75 kg skydiver if she is falling at 52 m/s?
Formula:
Variables with units:
Work with Units:
Final Answer with Units:
Answer:
101,400 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
From the question
m = 75 kg
v = 52 m/s
We have
[tex]k = \frac{1}{2} \times 75 \times {52}^{2} \\ = \frac{1}{2} \times 75 \times 2704 \\ = 75 \times 1352 \\ = 101400[/tex]
We have the final answer as
101,400 JHope this helps you
A 10 kg box initially at a speed of 10 m/s accelerates uniformly to a speed of 20 m/s in 2
seconds. Determine the
A. energy gained by the block
Answer:
What Um Sorry Where's The Answer?....
Ano ang mangyayari kung hindi mo gagamitin ang iyong talento?
Answer:
mas lalo kang tinatamaran magaral
Adam and Bobby are twins who have the same weight. Adam drops to the ground from a tree at the same time that Bobby begins his descent down a frictionless slide. If they both start at the same height above the ground, how do their kinetic energies compare when they hit the ground
Answer:
They are the same.
Both have potential energy of M g H and that is the energy that will be converted to kinetic energy for each twin,
2. In these diagrams, the sunlight is coming from the left, as shown by the arrows. Which
diagram is accurate and why? (1)
a) A is accurate because the half of the Moon that is facing the sun is it by the sun, and the
other half is dark.
b) B is accurate because the whole Moon is bright as long as there are no shadows
covering parts of it.
c) C is accurate because the Moon is almost as close as it can be to the sun, and so the
Moon is almost fully lit by the sun.
d) All three diagrams are sometimes accurate because the Moon has some lighter-colored
rock and some darker-colored rock, and the half of the Moon with the lighter-colored
rock rotates to face different directions.
Answer:
Explanation:
a) A is accurate because the half of the Moon that is facing the sun is it by the sun, and the other half is dark.
The most accurate diagram of the Sun and Moon is: a. A is accurate because the half of the Moon that is facing the sun is it by the sun, and the other half is dark.
What is a Moon?A Moon can be defined as the natural satellite of planet Earth that shines due to the Sun's reflected light (sunlight), as it revolves around the Earth from west to east in 29½ days.
The phases of the Moon.Based on astronomical information, there are four (4) primary Moon phases and these are:
New MoonFirst QuarterFull MoonThird Quarter (Last Quarter)In conclusion, diagram A is the most accurate because half of the Moon that faced the Sun is lit by the Sun while the other half is dark.
Read more on Moon here: brainly.com/question/1286910
At which location does the South Pole receive 24 hours of daylight?
below the Antarctic Circle.
can anyone heelp me pls
Answer:
Capsule : solid
Suspension : liquid
lotion : semisolid
Explanation:
The first motor abilities a new born exhibits are
Answer:
here your answer
i am sorry if wrong
what force is represented by the vector
What forces act on an airplane to keep it in the air? If the airplane is traveling at a constant velocity, what could be said about the magnitudes of the forces?
Let's see
[tex]\\ \sf\longmapsto \overrightarrow{drag}[/tex]
[tex]\\ \sf\longmapsto \overleftarrow{Thrust}[/tex]
[tex]\\ \sf\longmapsto Lift\:Force\uparrow[/tex]
[tex]\\ \sf\longmapsto Acceleration\:due\:to\: gravity\downarrow[/tex]
Net force is 0
The rocket now has a thruster that malfunctions and is now pushing the rocket in the wrong direction. What is the new net force on the rocket if it is now accelerating at 12mls²??
From your previous question
Mass=30kgAcceleration=12m/s^2[tex]\\ \sf\longmapsto F=ma[/tex]
[tex]\\ \sf\longmapsto F=30(12)[/tex]
[tex]\\ \sf\longmapsto F=360N[/tex]
A box is pushed horizontally with constant speed across a rough horizontal surface. Which of the following must be true?
a) The friction is less than the applied force
b) There is no friction acting on the box
c) The friction is greater than the applied force
d) The friction is equal to the applied force
Iron and nickel are examples of _______ materials
Content From May net
Answer:an iron-nickel alloy or nickel -iron alloy abbreviated FeNi or NiFe is a group of alloys consisting primarliy of the elemtns nickel and iron.
Explanation:
Answer:
Iron and nikel are example of "Metal" materials.
1) A bowling has a mass of 5 kg and a speed of 8 m/s. What is its momentum?
2) If the bowling ball started from a momentum of O and reached a momentum of 40
kg*m/s in 2 seconds. What is the impulse impacted on the bowling ball?
3) What is the force of impact for the 2 seconds?
what is the distance between a(-6,3),b(-2,4),c(-8,3)
Answer:
Explanation:
Appears to be the vertexes of a triangle.
AB = √(-6 - (-2))² + (3 - 4)²) = √17
AC = √(-6 - (-8))² + (3 - 3)²) = 2
BC = √(-2 - (-8))² + (4 - 3)²) = √37
Which factors would increase heating of Earth, and which factors would decrease it
Answer:
So as sunlight continued to enter the box and the walls continued to warm, heat built up inside and increased the temperature.
Câu 1. Trong dao động điều hoà, phát biểu nào sau đây là không đúng ?
A.Cứ sau một khoảng thời gian T (chu kì) thì vật lại trở về vị trí ban đầu.
B.Cứ sau một khoảng thời gian T thì vận tốc của vật lại trở về giá trị ban đầu.
C.Cứ sau một khoảng thời gian T thì gia tốc của vật lại trở về giá trị ban đầu.
Cứ sau một khoảng thời gian T thì biên độ của vật lại trở về giá trị ban đầu
Answer:
whatttttttttttt
Explanation:
the ಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠ
Someone help this is a test and i need to finish this quick i will give brainliest of it lets me
Sorry, I don't know but I think the correct answer is the first option.
tính chỉ số ampe kế thay ampe kế bằng vô kế có điện trở rất lớn thì vô kế chỉ bao nhiêu
Answer:
I don't understand it.....
in a collision, a 25.0kg mass moving at 3.0m/s transfers all of its momentum to a 5.0kg mass. What is the velocity of the 5.0kg mass after the collision?
Answer:
Explanation:
The 25.0 kg mass has momentum before the collision of
p = 25.0(3.0) = 75 kg•m/s
If all this momentum gets transferred into a 5.0 kg mass, the velocity of the 25.0 kg mass will be zero and the velocity of the 5.0 kg mass will be
75 / 5.0 = 15.0 m/s
Getting this to occur will require an addition of a significant amount of energy via an internal explosion or release of spring potential energy. This can be shown by looking at kinetic energies.
Initial system kinetic energy is ½(25.0)3.0² = 112.5 Joules
After the collision, system kinetic energy is ½(5.0)25² = 1,562.5 Joules
so 1562.5 - 112.5 = 1450 Joules of energy must be released during the collision to complete this scenario.
The most efficient energy transfer without energy release is an ideal elastic collision. Had these two masses been in such a collision with the given initial conditions, the 5 kg mass would have moved away at 5.0 m/s taking with it 5(5) = 25 kg•m/s of momentum leaving the 25 kg mass with 75 - 25 = 50 kg•m/s of momentum and a velocity of 50/25 = 2.0 m/s. Both masses are now traveling in the same direction as the original velocity, but at different speeds. Notice kinetic energy is conserved in elastic collisions
½(25)2² + ½(5.0)5² = 112.5 Joules.
The only time one mass can transfer its entire momentum to another mass without additional energy addition or subtraction is when the two colliding masses are identical in magnitude. Think pool balls colliding on a table.
find charge and charge density on the surface of a conducting sphere of radius 15.2cm where potential at 215 v
this is the correct answer
When converted to a household measurement, 9 kilograms is approximately equal to a
Answer:
D) 19.8 lbs
Explanation:
1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.
1kg is also equal to 2.205 lbs. 9*2.205=19.8416
9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system
a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.
This leaves us with 19.8 lbs
PLEASE HELP ME!!!!!!!!!!!!!
Answer:
D gravity
Explanation:
please mark me brainliest
Answer:
D. The force that the branch applies to the kitten
Explanation:
I just took the quiz and got it correct!
dsfhfdskjhfdkshjkfdhskjdfhkjshjkfhsdkjf
Answer:
Abcdfeghijklmnopqrstuvwxyz
Explanation:
They are in order
What is the intensity level for a sound of Intensity 10-⁶w/m²
How do I do these three parts ?what are the answers I’ve been trying for days
Answer:
Explanation:
ASSUMING the clay is moving horizontally and friction is negligible.
momentum is mass times velocity
9a)
m₁v + m₂(0) = m₁vf + m₂vf
m₁v = (m₁ + m₂)vf
vf = m₁v / (m₁ + m₂)
9b)
ASSUMING the positive direction is also the original direction of the clay ball
m₁v + m₂vb = (m₁ + m₂)vf
vf = (m₁v + m₂vb) / (m₁ + m₂)
9c)
vf = (0.37(25) + 4.6(3.4)) / (0.37 +4.6)
vf = (9.25 + 15.64) / 4.97
vf = 5.0080482897...
vf = 5.0 m/s