The Diels-Alder mechanism between a diene and a dienophile is _____, which means that bond breaking happens _____ as bond forming.To help the mechanism succeed, the diene should have an _____ group and the dienophile should have an ______ group.

The group highlights the metalloids in the illustration of the periodic table is C.

The C are the metalloids or the semi-metals this means they have the some properties that is similar to the metals and the non-metals. The Metalloids can be defined as the chemical elements whose the physical and the chemical properties fall in the between the metal and the non-metal categories.

The Boron, the germanium, silicon, the antimony, arsenic, the tellurium and the pollanium are the seven that is most widely recognized metalloids. Therefore, the metalloids are highlighted by the group C that is present in the periodic table.

To learn more about periodic table here

https://brainly.com/question/17061774

#SPJ4

The number of water molecules in the container when one electron is removed from every hundredth water molecule and placed in a container is 100. m from the water is 3.30 x 1025.

Given,1 liter of water = 1000 g of water1 mole of water molecules = 6.022 x 1023 particles.

Therefore, 55.5 moles of water molecules = 55.5 x 6.022 x 1023 particles = 3.33 x 1025 particles one electron is removed from every hundredth water molecule.

So, 1 electron is removed from 1% of water molecules. Therefore, the number of water molecules from which the electron is removed = (1/100) x 3.33 x 1025 = 3.33 x 1023 molecules.

Now, this electron is placed 100 m away from the water container. The distance between the water container and the electron is not relevant for finding the number of water molecules in the container, hence can be ignored.

So, the number of water molecules in the container = Total number of water molecules - number of water molecules from which electron is removed= 3.33 x 1025 - 3.33 x 1023 = 3.30 x 1025.

Learn more about water molecules here.https://brainly.com/question/31200627

#SPJ11

A metastable state is a state of the substrate in which the reaction can proceed but typically requires a catalyst. This statement best describes a metastable state. The correct answer is C.

A metastable state is a state of the substrate in which the reaction can proceed but typically requires a catalyst. It is a state of matter that is not in equilibrium but appears to be in equilibrium for a long time, after which it collapses to its most stable state.

Metastability is the quality of a non-equilibrium system to remain in a quasi-stable state for a longer period than predicted by the system's relaxation time.

Here are some characteristics of metastable states: The equilibrium changes in the state but not in the rate. The activation energy difference between a catalyzed and an uncatalyzed reaction makes up the metastable state. The state is made up of transient complexes with the substrate.

To know more about metastable state, refer here:

https://brainly.com/question/14328349#

#SPJ11

Answer:Cutting, tearing, shattering, grinding, and mixing are further types of physical changes because they change the form but not the composition of a material. For example, mixing salt and pepper creates a new substance without changing the chemical makeup of either component.

Explanation:

Answer:

hypotheticcally 8

Explanation:

Answer: "C the long-term survival of an entire species of organisms."

Explanation:

A - Yes, reproduction of the species is part of Evolution, it is not the best answer for the question taking into account the other possible answers.

B - Evolution is not necessarily a short-term thing, Evolution occurs over a long period of time.

C - *Refer to the explanation above.*

D - This answer has more to do with Ecosystems, rather than Evolution/Natural Selection.

Based on the observation in the warm-up activity, where the temperature of the surrounding water increased during the reaction inside the chamber, it can be inferred that the reaction released heat energy (enthalpy).

This is because the temperature of the surrounding water increased, indicating that energy was transferred from the system (reaction inside the chamber) to the surroundings (water).

According to the first law of thermodynamics, the total energy of a closed system is conserved, meaning that energy cannot be created or destroyed but can only be transferred between the system and the surroundings. In exothermic reactions, energy is released by the system to the surroundings, resulting in an increase in the temperature of the surroundings.

Therefore, the observation of an increase in temperature of the surrounding water suggests that the reaction inside the chamber is exothermic and releases heat energy.

To learn more about enthalphy  refer to:

brainly.com/question/30055078

#SPJ4

If the compartment could retain the same quantity of moles of N2 gas as determined in the previous question at a temperature of 45.0°C, the pressure inside would be 28.6 atm.

P = nRT/V

replacing the specified values:

P = 28.6 atm when P = (0.0122 mol)(0.0821 L atm/mol K)(45.0°C + 273) / 0.050 L.

We can use the following conversion factor to change this pressure from kPa to atm:

101.325 kPa per atm

Therefore, the pressure in kPa is 2899 kPa: 28.6 atm x 101.325 kPa/atm

To put it in terms of how much higher than normal atmospheric pressure this would be:

28.6 times (2899 kPa / 101.325 kPa)

As a result, there would be an increase in pressure of 28.6 times inside the container.

To learn more about pressure visit:

brainly.com/question/1890275

#SPJ1

Examples of soluble substances in water include table salt (NaCl), sugar (sucrose), and ethanol. Examples of insoluble substances in water include oil, sand, and wax.

Solubility is the property of a substance to dissolve in a solvent to form a homogenous solution. Water is a universal solvent and can dissolve a wide range of substances, including salts, sugars, and polar compounds like ethanol. These substances have polar or ionic bonds that can be easily broken by the polar water molecules. On the other hand, substances like oil, sand, and wax do not dissolve in water because they are nonpolar and do not have the ability to form strong interactions with water molecules. Therefore, they are considered insoluble in water.

Learn more about insoluble substances here: brainly.com/question/18799126

#SPJ4

A solution is made by dissolving 19.8 g of Compound AB in enough water to create a 115.1 ml solution. The solution's density is: 1.14 g/mL.

The formula for the molality of a solution is m = moles of solute/mass of solvent in kilograms.

To begin, we must first convert the solution's density to mass by using the density formula: density = mass/volume

Mass = density x volume

Mass = 1.14 g/mL x 115.1 mL

Mass = 131.214 g

Next, we must convert grams to kilograms for the mass of the solvent in the molality formula by dividing the mass by 1000.

Mass of solvent in kilograms = 131.214 g / 1000

Mass of solvent in kilograms = 0.131214 kg

Finally, we must calculate the moles of solute, which is Compound AB. To do so, we must use the compound's molar mass, which is calculated by adding up the atomic weights of each element present in the compound. We'll use the following calculations to find the molar mass of Compound AB.

Molar mass of Compound AB = 1 mol A + 1 mol B= 35.5 g/mol A + 79.9 g/mol B

Molar mass of Compound AB = 115.4 g/mol

Now that we have the molar mass of Compound AB, we may calculate the number of moles of solute by dividing the mass by the molar mass.

Number of moles of solute = 19.8 g / 115.4 g/mol

Number of moles of solute = 0.1716 mol

Now that we have the moles of solute and the mass of solvent in kilograms, we can plug in our values to the molality formula to obtain the solution's molality.

m = moles of solute/mass of solvent in kilograms

= 0.1716 mol / 0.131214 kgm = 1.306 mol/kg

The molality of the AB solution is 1.306 mol/kg.

To know more about Compound AB refer here:

https://brainly.com/question/2848459#

#SPJ11

Answer:

dT/dt=2.680K/M

Explanation:

In this case we have:

P=8atm

R=0.0821

dP/dt=0.10 atm/min

V=10L

dV/dt=0.15L

n=10 moles

given that PV=nRT

d(PV)/dt=d(nRT)/dt

P(dV/dt)+V(dP/dt)=nRdT/dT

8*0.15+10*0.10=10*0.0821* dT/dt

dT/dt=2.6796589525

dT/dt=2.680K/m

(If it was not right please let me know)

It would take roughly 5.11 hours for half of a certain amount of the non-steroidal anti-inflammatory drug to be metabolized, and another 5.11 hours for half of the remaining amount, and so on, until the drug is fully metabolised.

The half-life of a reaction is the amount of time it takes for half of the initial substance to be metabolized. In this case, the non-steroidal anti-inflammatory drug is metabolized with a first-order rate constant of 3.25 day-1, which means that the rate of metabolism is proportional to the concentration of the drug.

To calculate the half-life of this reaction, we can use the equation:

t1/2 = ln(2) / k

Where t1/2 is the half-life, ln(2) is the natural logarithm of 2 (approximately 0.693), and k is the first-order rate constant.

Plugging in the values we have, we get:

t1/2 = 0.693 / 3.25 day-1

Solving this equation gives us a half-life of approximately 0.213 days, or about 5.11 hours.

Therefore, if we start with a certain amount of the non-steroidal anti-inflammatory drug, it would take approximately 5.11 hours for half of it to be metabolized, and another 5.11 hours for half of the remaining amount to be metabolized, and so on until the drug is completely metabolized.

To learn more about first-order rate constant refer to:

brainly.com/question/30828263

#SPJ4

The buffers with 0.3 M CH3COONa will be the most effective towards additions of a base, as it has the smallest change in pH upon the addition of a base.

The buffer containing the most CH3COO-, the conjugate base, will be the most efficient. This is due to the fact that the buffer capacity is dependent on the conjugate acid and base concentration, with larger concentrations resulting in a more effective buffer.

We must calculate the pH of the buffer solution at each of the specified concentrations and select the one with the smallest change in pH upon the addition of a base in order to identify the concentration of sodium acetate that is the most effective.

Using the Henderson-Hasselbalch equation:

pH = pKa + log([CH3COO-]/[CH3COOH])

where the pKa of CH3COOH is 4.76.

At 0.3 M CH3COONa: pH = 4.76 + log(0.3/0.10) = 4.96

At 2.5 M CH3COONa: pH = 4.76 + log(2.5/0.10) = 5.36

At 2.0 M CH3COONa: pH = 4.76 + log(2.0/0.10) = 5.26

At 1.5 M CH3COONa: pH = 4.76 + log(1.5/0.10) = 5.16

At 3.0 M CH3COONa: pH = 4.76 + log(3.0/0.10) = 5.46

Therefore, the buffer with 0.3 M CH3COONa will be the most effective towards additions of a base, as it has the smallest change in pH upon the addition of a base.

learn more about buffer here

https://brainly.com/question/4177791

#SPJ1

If the salt thermally decomposes, yielding a volatile product, then the reported percent water in the original sample may be affected.

This is because the water content in the sample may be overestimated due to the presence of the volatile product, which may also be driven off during the heating process. As a result, the reported percent water may be higher than the actual value.

In order to accurately determine the water content of the original sample, the volatile product must be accounted for in the analysis. This can be done by measuring the mass loss of the sample during the heating process, taking into account the mass of the volatile product that is released. Alternatively, the volatile product can be captured and weighed separately, allowing for the accurate determination of the water content in the original sample.

It is important to note that the effect of the volatile product on the reported percent water will depend on the amount and volatility of the product, as well as the analytical method used for determining the water content. Careful consideration and validation of the analytical method is therefore important when analyzing samples that may yield volatile products during thermal decomposition.

To learn more about salt refer to:

brainly.com/question/24249548

#SPJ4

There are 0.916 moles of Zn(NO₃)₂ in 173.50 g of the substance.

To calculate the moles of Zn(NO₃)₂ in 173.50 g of the substance, we need to know the molar mass of Zn(NO₃)₂.

The molar mass of Zn(NO3)2 can be calculated by adding the atomic masses of zinc (Zn), nitrogen (N), and oxygen (O), and then multiplying by the number of atoms of each element in the compound:

Molar mass of Zn(NO₃)₂ = (65.38 g/mol for Zn) + (2 x 14.01 g/mol for N) + (6 x 16.00 g/mol for O)

Molar mass of Zn(NO₃)₂ = 189.39 g/mol

Now we can use the following formula to calculate the moles of Zn(NO₃)₂:

moles = mass / molar mass

moles = 173.50 g / 189.39 g/mol

moles = 0.916 moles

To know more about moles here

https://brainly.com/question/26416088

#SPJ4

--The given question is incomplete, the complete question is

"Moles of Zn(NO₃)₂ in 173. 50 g of this substances. Express your answer in moles to four significant figures."--

the bromination of propane is a highly exothermic and spontaneous reaction that proceeds through a radical mechanism. The reaction kinetics are dependent on the concentrations of propane and bromine, while the thermodynamics indicate that the reaction is favorable under normal conditions.

The bromination of propane is a substitution reaction in which one or more hydrogen atoms on the propane molecule are replaced by bromine atoms. This reaction is initiated by the homolytic cleavage of the bromine molecule into two bromine radicals, which react with propane to form a mixture of products including 1-bromopropane, 2-bromopropane, and hydrogen bromide.

The mechanism of the reaction involves three steps:

1. Initiation: The reaction is initiated by the homolytic cleavage of the bromine molecule into two bromine radicals, each of which has an unpaired electron.

Br2 → 2 Br•

2. Propagation: The bromine radical reacts with propane to form a propane radical and hydrogen bromide. The propane radical then reacts with a bromine molecule to form a new bromine radical and a mixture of 1-bromopropane and 2-bromopropane.

Br• + C3H8 → C3H7• + HBr
C3H7• + Br2 → C3H7Br + Br•

3. Termination: The reaction terminates when two radicals combine to form a stable molecule, or when all of the bromine radicals have been consumed.

The kinetics of the reaction can be described by the rate law:

Rate = k [C3H8] [Br2]

where k is the rate constant and [C3H8] and [Br2] are the concentrations of propane and bromine, respectively. The reaction is second-order with respect to propane and first-order with respect to bromine.

The thermodynamics of the reaction can be described by the change in Gibbs free energy (∆G), enthalpy (∆H), and entropy (∆S). The reaction is exothermic (∆H < 0) and spontaneous (∆G < 0) at room temperature. The entropy change (∆S) is positive, indicating that the disorder of the system increases during the reaction.

Overall, the bromination of propane is a highly exothermic and spontaneous reaction that proceeds through a radical mechanism. The reaction kinetics are dependent on the concentrations of propane and bromine, while the thermodynamics indicate that the reaction is favorable under normal conditions.
To know more about Bromination go through -

https://brainly.com/question/31325887

#SPJ4

n(C3H8) = V(P) x (P/T) x (1/mol.mass C3H8)

where V(P) is the volume of propane gas at pressure P and temperature T, and mol.mass C3H8 is the molar mass of propane (44.1 g/mol)

n(C3H8) = 0.650 L x (1 atm/1.01325 bar) x (1/273.15+25) K x (1/44.1 g/mol)

n(C3H8) = 0.0153 mol

Therefore, the amount of oxygen required for complete combustion of propane is:

n(O2) = 5 x n(C3H8)

n(O2) = 5 x 0.0153 mol

n(O2) = 0.0765 mol

To find the volume of oxygen required, we can use the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature of the gas in Kelvin.

Rearranging the equation and plugging in the values, we get:

V(O2) = n(O2)RT/P

where R is the gas constant (0.08206 L atm mol^-1 K^-1) and T is the temperature in Kelvin (298 K)

V(O2) = 0.0765 mol x 0.08206 L atm mol^-1 K^-1 x 298 K / 1 atm

V(O2) = 1.86 L

Therefore, 1.86 L of oxygen is required to completely combust 0.650 L of propane.

To find the volume of carbon dioxide produced, we use the same approach:

n(CO2) = 3 x n(C3H8)

n(CO2) = 3 x 0.0153 mol

n(CO2) = 0.0459 mol

V(CO2) = n(CO2)RT/P

where R is the gas constant (0.08206 L atm mol^-1 K^-1) and T is the temperature in Kelvin (298 K)

V(CO2) = 0.0459 mol x 0.08206 L atm mol^-1 K^-1 x 298 K / 1 atm

V(CO2) = 1.08 L

Therefore, 1.08 L of carbon dioxide is produced in the reaction.

Please mark this answer as brainliest if possible.

The cage size of the zeolites is in angstroms scale. The size of the cage of zeolites ranges from 2-10 angstroms and that is too small to be measured in centimeters. So, the statement given is false.

Zeolites are defined as the minerals which contain mainly aluminum and silicon compounds. These are used as drying agents in detergents and in water and air purifiers. The zeolites have a cage size which is much more smaller than a nanometer which makes them selective towards certain molecules based on their size and shape.

The properties of zeolites are attributed to their pore structure of the cage. Zeolite is composed of channels and cages which provides a surface area that is accessible to molecules that can be adsorbed.

Zeolite have high surface area of which makes them an effective catalyst for a wide range of reactions which includes the conversion of petroleum feedstocks to gasoline and diesel fuel.

To learn more about Zeolites

https://brainly.com/question/31115840

#SPJ4

The polarity of water is a critical property that enables it to dissolve and transport ions, such as sodium and potassium, to the heart cells, which are essential for proper cardiac function.

The property of water that allows it to carry ions to the heart is its polarity. Water is a polar molecule, which means it has a partial negative charge near the oxygen atom and a partial positive charge near the hydrogen atoms. This polarity allows water molecules to interact with and dissolve ionic compounds, such as sodium and potassium ions, which are crucial for the proper functioning of heart cells. In the bloodstream, sodium and potassium ions are transported by the water molecules.

To know more about cardiac function, here

brainly.com/question/6598720

#SPJ4

Scientists have hypothesized that the O157:H7 strain of E. coli is so different from the K-12 strain due to a process called horizontal gene transfer. This is the transfer of genetic material between different bacteria, and it can occur through mechanisms such as conjugation, transformation, and transduction.

In the case of E. coli O157:H7, it is believed that the strain acquired new genes through horizontal gene transfer from other bacteria. These new genes may have provided the strain with new capabilities, such as the ability to produce toxins and survive in new environments. This could explain why the O157:H7 strain is more pathogenic and causes more severe illness than the K-12 strain.

Horizontal gene transfer is an important mechanism for the evolution and adaptation of bacteria, and it plays a significant role in the emergence of new bacterial strains with unique characteristics.

Find out more about  Horizontal gene transfer

brainly.com/question/30801459

#SPJ4

The limiting reactant of the reaction as shown is AgNO3 because it has less theoretical yield.

The limiting reactant in a chemical reaction is the reactant that gets consumed completely and limits the amount of product that can be formed.

Compare the calculated number of moles of product that can be formed from each reactant. The reactant that produces the smaller number of moles of product is the limiting reactant.

It is important to identify the limiting reactant because it determines the maximum amount of product that can be formed in the reaction.

Learn more about limiting reactant:https://brainly.com/question/14225536

#SPJ1

The atomic number of an atom is always equal to the total number of protons in the nucleus. Therefore, the correct answer is "protons in the nucleus".

The atomic number of an atom represents the number of protons present in the nucleus of the atom. Protons are positively charged particles, and they determine the element to which the atom belongs. The number of protons in the nucleus is equal to the number of electrons in the neutral atom, which determines the chemical properties of the element. Neutrons are uncharged particles present in the nucleus, and their number may vary for different isotopes of the same element. Therefore, the atomic number cannot be equal to the total number of neutrons in the nucleus or the total number of protons plus electrons in the atom.

Learn more about protons here: brainly.com/question/1252435

#SPJ4

a. The pressure in the compartment would be 6.7 atm at 45.0°C. b. Converting 6.7 atm to kPa gives 680.6 kPa. This is about 6.7 times greater than standard atmospheric pressure.

Converting 0.050 L to m³ gives 5.0 x 10^-5 m³.

Using the ideal gas law, we can calculate the new pressure to be 4.4 atm.

We can use the Ideal Gas Law to solve this problem, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.

a) We are given the volume V = 0.050 L, the temperature T = 45.0°C = 318.15 K, and the assumption that the compartment holds the same number of moles of N2 as in the previous question, which is n = 0.036 mol. We can rearrange the Ideal Gas Law to solve for P:

P = nRT/V

P = (0.036 mol)(0.0821 L·atm/mol·K)(318.15 K)/(0.050 L)

P = 146.7 atm

b) To convert this pressure to kPa, we can use the conversion factor 1 atm = 101.3 kPa:

P = 146.7 atm x 101.3 kPa/atm

P = 14862 kPa

To describe how many times greater than standard atmospheric pressure this would be, we can divide this pressure by standard atmospheric pressure, which is approximately 101.3 kPa:

14862 kPa / 101.3 kPa = 146.5

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ1

Aluminum is used to make the metal cylinder.

To determine the substance of the metal block, we need to calculate its specific heat capacity, which is the amount of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius.

The equation for calculating the heat absorbed by a substance is:

q = m * c * ΔT

where q is the heat absorbed, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

In this case, we have:

m = 500.0 g (given)

ΔT = 50.0 K (given)

q = unknown

To find c, we can rearrange the equation to:

c = q / (m * ΔT)

We know that the metal block absorbed some amount of heat, which we can calculate by multiplying the mass of the block by the specific heat capacity of water (which is 4.184 J/g*K) and the temperature change:

q = (500.0 g) * (4.184 J/g*K) * (50.0 K) = 104,600 J

Now we can calculate the specific heat capacity of the metal block:

c = q / (m * ΔT) = (104,600 J) / (500.0 g * 50.0 K) = 4.184 J/g*K

This specific heat capacity is very close to that of aluminum (which is 0.903 J/g*K) and therefore, we can conclude that the metal block is made of aluminum.

To learn more about temperature refer to:

brainly.com/question/29072206

#SPJ4

As sediments settle on land or water : b) sediments settle and create layers and cement together over time.

As sediments settle on land or water, they undergo a process that is called sedimentation. Sedimentation is the process of settling and accumulation of the sediments, which can take place in different environments such as lakes, rivers, oceans, or on land.

Over time, these sediments become compacted and cemented together, forming sedimentary rocks. The layers of sedimentary rocks can also contain fossils, providing important clues to the history of life on Earth and sediments do not float to the top to create hills or become a gas over time.

To know more about sedimentation, refer

https://brainly.com/question/93174

#SPJ1

The relationship between pressure and volume of a gas is Inverse, so that as volume decreases, pressure increases. The relationship between pressure and volume of a gas is called the Boyle's Law.

According to this law, at a constant temperature and amount of gas, the pressure and volume of a gas are inversely proportional to each other i.e. PV = K where P is the pressure, V is the volume, and K is a constant. So, as the volume of a gas decreases, the pressure increases, and as the volume of a gas increases, the pressure decreases.

This can be explained by the fact that as the volume decreases, the molecules of gas are compressed into a smaller space, which causes them to collide more frequently with each other and the walls of the container. This increase in collisions results in an increase in pressure. Conversely, as the volume increases, the molecules of gas have more space to move around and collide less frequently, resulting in a decrease in pressure.

More on Boyle's Law: https://brainly.com/question/2273952

#SPJ11

As a result, the material has a specific heat capacity of 0.20 J/g°C.

Its specific heat capacity is the amount of heat energy required to raise the temperature of a unit mass of any substance or matter by one degree Celsius.

We can use the following formula to find the substance's specific heat capacity: Q = m * c * ΔT

where Q is the extra energy in joules, m is the substance's mass in grammes, c is its specific heat capacity in joules per gramme of temperature, and T is the temperature change in degrees Celsius.

When we substitute the specified values, we obtain:

36.6 J = (6.1 g) * c * (80.0°C - 50.0°C)

Simplifying and solving for c, we get:

c = 36.6 J / (6.1 g * 30.0°C)

c = 0.20 J/g°C

To know more about temperature visit:-

https://brainly.com/question/29072206

#SPJ1

All bond types in a carboxylic acid have critical extremity, with the exception of the connection between the two carbon iotas in the carboxyl group.

A carboxyl group is a user group that comprises a carbonyl group (C=O) and a hydroxyl group (- Goodness) joined to a similar carbon molecule, which is likewise clung to a third iota or group.

The carbonyl group in the carboxyl group has a critical extremity because of the electronegativity distinction between the oxygen and carbon iotas. The oxygen iota is more electronegative than the carbon particle, and that implies that it draws in the common electrons in the bond all the more firmly, making a halfway regrettable charge on the oxygen and a fractional positive charge on the carbon.

The hydroxyl group in the carboxyl group likewise has a critical extremity, with the oxygen iota being more electronegative than the hydrogen particle, bringing about a fractional negative charge on the oxygen and a halfway certain charge on the hydrogen.

to know more about the carboxyl group click here:

https://brainly.com/question/3362938

#SPJ4

The pressure is 0.25 atm when the gas occupies 22.4 L at 100 K.

First we can use the combined gas law equation:

(P1 x V1) / (T1) = (P2 x V2) / (T2)

Where

We can rearrange the equation to solve for P2:

P2 = (P1 x V1 x T2) / (V2 x T1)

Plugging in the values, we get:

P2 = (1.00 atm x 11.2 L x 100 K) / (22.4 L x 200 K)

P2 = 0.25 atm

Therefore, the pressure is 0.25 atm when the gas occupies 22.4 L at 100 K.

Learn more about combined gas law here : brainly.com/question/15823278

#SPJ1