Answer:
I think the answer is gamma or x ray
A stone dropped from the roof of a single-story building to the surface of the earth:
A.
falls because of the natural tendency of all objects to rest on the surface of the earth.
B.
reaches a maximum speed quite soon after release and then falls at a constant speed thereafter.
C.
speeds up as it falls because the gravitational attraction gets considerably stronger as the stone gets closer to the earth.
D.
speeds up because of an almost constant force of gravity acting upon it.
E.
falls because of the combined effects of the force of gravity pushing it downward and the force of the air pushing it downward.
Answer:
D
Explanation:
Gravity is a force that pulls objects down toward the ground. When objects fall to the ground, gravity causes them to accelerate. Acceleration is a change in velocity, and velocity, in turn, is a measure of the speed and direction of motion.
A=9.8m/s^2 or the gravitational accelerational
If a stone dropped from the roof of a single-story building to the surface of the earth speeds up because of an almost constant force of gravity acting upon it,there4fore the correct answer is option D.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,
For any free-falling object, the acceleration due to gravity is constatant.
The correct response is option D if a stone thrown from the roof of a one-story structure to the surface of the ground accelerates due to an almost constant force of gravity acting upon it.
To learn more about gravity from here, refer to the link;
brainly.com/question/4014727
#SPJ2
13. A type of cuckoo clock keeps time by having a mass bouncing on a spring, usually something cute like a cherub in a chair. What force constant is needed to produce a period of 0.500 s for a 0.0150-kg mass?
The answer is 2.37N/m but please show your work.
The force constant that is needed to produce a period of 0.500 s for a 0.0150-kg mass is 2.37 N/m
Data obtained from the questionPeriod (T) = 0.5 s
Mass (m) = 0.015 Kg
Pi (π) = 3.14
Spring constant (K) =?
How to determine the spring constantThe spring constant can be obtained by using the formula for calculating the period of simple harmonic motion. This is illustrated below
T = 2π√(m /K)
Square both side
T² = 4π²m / K
Cross multiply
T² × K = 4π²m
Divide both side by T²
K = 4π²m / T
K = (4 × 3.14² × 0.015) / 0.5²
K = 2.37 N/m
Learn more about spring constant:
https://brainly.com/question/9199238
#SPJ1
Science!!
How much TIME would it take for Plutonium-239 to decay 50g of its original substance to 12.5g?
A drill bit in a hand drill is turning at 1200 revolutions per minute (1200 rpm). Express this angular speed in radians per second (rad/s).
Answer:
the answer will be about 126 rad/s
Explanation:
A vertical spring launcher is attached to the top of a block and a ball is placed in the launcher, as shown in the figure. While the block slides at constant speed to the right across a horizontal surface with negligible friction between the block and the surface, the ball is launched upward. When the ball reaches its maximum height, what will be the position of the ball relative to the spring launcher?.
For a vertical spring launcher is attached to the top of a block and a ball is placed in the launcher, the position of the ball will be behind the box
What will be the position of the ball relative to the spring launcher?Generally, the equation for the conservation of momentum principle is mathematically given as
(M+m) V1 = M*V2
Therefore, with the ball moving forward we have that; the ball at top it wii be behind the box,
Read more about Motion
https://brainly.com/question/605631
Answer:
Above and to the left of the spring launcher
Explanation:
The ball would be to the left of the box because the box is moving to the right at a constant speed. And when the ball goes and reaches its maximum height, the box would have passed the ball.
1 1.3.3 Test (CST): Marketing and
Question 19 of 20
What does the Federal Reserve help regulate?
A. Music
B. Clothing
C. Food
D. The economy
The Federal Reserve helps to regulate the economy of the United States. So, the correct option is D.
What is meant by marketing ?Marketing is defined as the activities done for promoting the products through creating offers and communicating to the customers.
Here,
The Federal Reserve of the United state is functioning as a Central Bank, such that they are maintaining the financial aspects of the system.
The Federal Reserve has a great role in regulating the financial system and at the same time, the establishing of the monetary policies.
The primary functions of the Federal Reserve includes the functions of maintaining the banking operations and reliable payments for the system.
Hence,
The Federal Reserve helps to regulate the economy of the United States.
To learn more about marketing, click:
https://brainly.com/question/13414268
#SPJ7
what characteristics are shared by both heating and cooling curves? choose 4
The characteristics shared by both heating and cooling curves is that phases changes when the temperature stays the same.
What is heating and cooling?Heating is the process by which the temperature of a place or substances or object is increased.
Cooling Is the process of lowering the temperature of a substance or object by using conditioners or by freezing .
Therefore, The characteristics shared by both heating and cooling curves is that phases changes when the temperature stays the same.
Learn more about heating and cooling below.
https://brainly.com/question/9938370
#SPJ1
An athlete gains 300J of KE when running at 3m/s. Find the mass of the athlete.
1. A particular solid material is heated but its temperature does not rise.
11
a) What is happening to the solid?
b) Where does the energy go that is being supplied to it?
[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]
Here's the answer ~
1. The energy that has been given to the solid material is being used to change its phase from solid to liquid.
2. This all energy is converted into latent heat of fusion causing change in state. so there's no increase in temperature.
Answer →
a) The phase of solid material is changing due to Absorption of heat.
b) The energy that is being supplied to it is absorbed by the material to break the intermolecular bonds.
Explanation:
Heat is a mod of transfer of energy, and solid is a giant network of atom or ions closely bounded with high inter molecular forces. When the bonds are formed lead to release in energy hence to break the bond you need to supply energy and that energy supplier is heat. Generally there are two types of heat, one that you sense as rising temperature and another where you see a gradually change in the phase of material. When the heat that you supply is being absorbed that means the energy is being consumed(absorbed) by the material, to break the bonds, and you doesn't sense the temperature of material being raised but the change in state of material from solid→Liquid, solid→gas depends on the type compound, the phase of material changes, same thing happens in reverse case from Gas→Liquid, Liquid→Solid, the energy is released in atmosphere. this absorbed or released energy(heat) is Latent heat.
Thanks for joining brainly community!
Why is data sent digitally from space probes instead of using an analog device?
A nonsinusoidal electromagnetic wave like that described in Section 32.2 has uniform electric and magnetic fields. The magnitude of the Poynting vector for this wave is 11.0 W/m2. Find the magnitude of the electric field.
The magnitude of the electric field will be 64.38 V/m. Mathematically, the electric field is found as the ratio of the voltage per unit length.
What is electric field?A physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field, either attracting or repelling them, is referred to as an electric field.
The magnitude of the electric field in terms of the pointing vector for this wave is found as;
[tex]\rm E_{MAX} = \sqrt{S \times c \times \mu_0 }[/tex]
Where,
E is the electric field
c is the speed of light
[tex]\mu_0[/tex] is the permeability
On Putting the given data ;
[tex]\rm E_{MAX} = \sqrt{11.0 \times 3 \times 10^8 \times 4 \times \pi \times 10^{-7}} \\\\\ \rm E_{MAX} =\sqrt{4144.8} \\\\ E_{MAX} =64.38 \ V/m[/tex]
Hence, the magnitude of the electric field will be 64.38 V/m.
To learn more about the electric field refer to the link;
https://brainly.com/question/26690770
#SPJ1
Hello people ~
A bird sitting on a high power line:
(a) gets killed instantly
(b) gets a mild shock
(c) gets a fatal shock
(d) is not affected practically
Answer:
(d) is not affected practically
Explanation:
A bird sitting on a high power line is not affected practically.
This is because both of its legs are at the same potential, and current cannot flow through its body.
Answer:
option D
Explanation:
The bird sitting on a high power line but the bird is not touching ground by its body parts .
Hence there is no way electricity can pass through its body to earth
Thus it won't get any shock .
Please help me i need know
Answer:
a) the result capacitor
ct=c1+c2+c3+c4
ct=2×10^-6+4×10^-6+6×10^-6+8×10^-6
ct=20×10^-14
b)q=ct×v
q=20×10^-14×50
q=1000×10^-14 c
Explanation:
c)v1=q/ct
v1=1000×10^-14/20×10^-14
v1=50 volt
v2=
Which of the following is an example if an unbalanced force
A. a computer on a table
B. a man leaning against a wall
C. a girl severing a volleyball
D. fruit in a ball
Answer:
C
Explanation:
I would have to say C because the girl is constantly moving in the act of serving the volleyball.
Hello people ~
In which of the following forms is the energy stored in a capacitor?
(a) Charge
(b) Potential
(c) Capacitance
(d) Electric field
Answer:
Potential
Explanation:
The most accurate term is Electrostatic potential energy
It is denoted as UCIt's named like this because the force between charges or electrons is called electrostatic force .
One positve and one negative charhe jave a force of -5. 00 N between them. If the force changed to -170 N , by what factor did the distance between them change
Answer:
The distance is shortenend by factor .1715
Explanation:
5 n = 1/r^2
sqrt (1/5) = r
170 n = 1 / ( x sqrt(1/5))^2
(xsqrt 1/5)^2 = 1/170
x sqrt 1/5 = .076696
x = .1715
What is the electric force between two charges? Charge one has a charge of 7 C and charge two has a charge of 5 C. The charges are 5,925 m apart. Round your answer to the fourth decimal place.
Answer:
See below
Explanation:
Coulomb's Law Force = k q1 q2 / r^2
k = Coulomb's constant = 8.9875517 x 10^9 kg m^3 /s^2 C^2
Force = 8.9875517 x 10^9 * 7 * 5 / (5925^2) = 8960.5102 N
Pls answer asap!! I need help on this question!
Hubble space telescope, Hubble deep field guide, moon, mercury, Saturn, sun, galaxy messier 101
Answer:
1-Hubble Deep Field Galaxy
2-Galaxy Messier 101
3-Sun
4-Saturn
5-Mercury
6-Moon
7-Hubble Space Telescope
Peristalsis is the action caused by contractions of muscles in this structure in the digestive system...
Group of answer choices
liver
pancreas
esophagus
trachea
Answer:
I believe the answer is esophagus
is water a pollutant?
Please help
What is the best description of a wave? a pulse that carries energy a disturbance that moves matter a medium disturbed by a vibration matter that is moved from one place to another
Wave is best described as a pulse that carries energy and is denoted as option A in this context.
What is a Wave?This is a disturbance which carries energy from one place to another without the movement of the matter.
Since matter isn't moved then it is best described as a pulse which carries energy from one place to another.
Read more about Waves here https://brainly.com/question/6069116
#SPJ4
Answer:A
Explanation:
what effect would you expect the termperature of a material to have on the ease with which electrons can be ejected from it via the photoelectric effect
Answer:
The photoelectric effect is a phenomenon in which the photoelectrons are emitted from the metal when an incident electromagnetic wave hits the metal. The incident light should have a threshold frequency to meet the work function of the metal
A person driving in a neighborhood traveling 9 m/s slows to a stop (0 m/s) over 4 seconds as they approach a stop sign. What is the rate of acceleration of the car coming to a stop in m/s2?
Answer:
-2.25
Explanation:
v=u+at
0=9+a(4)
9+4a=0
4a=-9
a= -2.25
the rate of acceleration of the car coming to a stop is 2.25 m/s².
What is Speed?speed is described as. the pace at which an object's location changes in any direction. Speed is defined as the distance traveled divided by the travel time. Speed is a scalar quantity because it just has a direction and no magnitude.
given, A person driving in a neighborhood traveling 9 m/s slows to a stop (0 m/s) over 4 seconds as they approach a stop sign.
The acceleration of the car can be calculated using the formula:
acceleration = (final velocity - initial velocity) / time
Here, the initial velocity is 9 m/s (the speed at which the car was traveling before braking),
the final velocity is 0 m/s (the speed at which the car comes to a stop), and the time taken to stop is 4 seconds. Substituting these values into the formula,
we get:
acceleration = (0 m/s - 9 m/s) / 4 s
acceleration = -9 m/s / 4 s
acceleration = -2.25 m/s²
The negative sign indicates that the car is decelerating, or slowing down.
Therefore, the rate of acceleration of the car coming to a stop is 2.25 m/s².
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ6
If force = mass x acceleration, then if an object has a mass of 10 grams
and the acceleration of 20 m/s, what is the force on the object?
Answer:
10g to kg=0.01
20×0.01=0.2
Force of 0.2N
How much w work is done by a babysitter who uses 4500 w of power to lift a baby in 4s
Serious answers please
Marley stayed up late to watch the planet Mars rise in the east. She had read online that Mars was unusually close to the Earth in its orbit and would look nearly as large as the moon. However, she only saw stars, and the next morning she ended up oversleeping because of her late bedtime. Marley was the victim of
Marley was the victim of a hoax. The synonym of the hoax is a practical joke, joke, jest, prank, trick, jape, and fraud.
What is the meaning of a hoax?To dupe someone into believing or accepting something untrue and frequently absurd as genuine.
A practical joke, joke, jest, prank, trick, jape, and scam are all synonyms for a hoax.
Marley stayed up late to watch the planet Mars rise in the east. She had read online that Mars was unusually close to the Earth in its orbit and would look nearly as large as the moon.
However, she only saw stars, and the next morning she ended up oversleeping because of her late bedtime. Marley was the victim of a hoax.
Hence a hoax is a correct answer.
To learn more about the hoax refer to the link;
https://brainly.com/question/10197989
#SPJ1
Two bodies of mass m1 and m2 are let fall freely from heights h1 and h2 respectively. The ratio of time taken by the bodies to fall through these heights is :
Answer:
√h₁/h₂
Explanation:
In free fall, the square of the time taken by the body is directly proportional to the height from which it is dropped.
t₁² ∝ h₁t₂² ∝ h₂Ratio
t₁²/t₂² = h₁/h₂t₁/t₂ = √h₁/h₂According to second equation of kinematics for free fall
h=-1/2gt²So
[tex]\\ \rm\Rightarrow h\propto t^2[/tex]
[tex]\\ \rm\Rightarrow h_1:h_2::t_1^2:t_2^2[/tex]
[tex]\\ \rm\Rightarrow t_1:t_2::\sqrt{h_1}:\sqrt{h_2}[/tex]
A disk whose rotational inertia is 450 kg.m2 hangs from a wire whose torsion constant is 2300 N.m/rad. When its angular displacement is -0.23 rad, what is its angular acceleration
For a disk whose rotational inertia is 450 kg.m2 hangs from a wire whose torsion constant is 2300 N.m/rad, the angular acceleration is mathematically given as
a = 1.176 rad/s^2
What is its angular acceleration?
Generally, the equation for the angular acceleration is mathematically given as
a = torsion constant x theta/inertia
therefore,
a = 2300 x 0.23/450
a = 1.176 rad/s^2
In conclusion, the angular acceleration is
a = 1.176 rad/s^2
Read more about acceleration
https://brainly.com/question/605631
4. If everything lines up perfectly for superposition to occur, these massive waves would break with a force of 100
metric tons per m². She compares this to how much force standing on a car?
If everything lies perfectly for superposition to occur, the force on a car is 1000 N.
What is superposition?Superposition is the phenomenon of placing one wave over the other so that they coincide. The resultant force will be zero.
The force in kg will be
1mteric ton = 1000 kg
1metric ton per m²= 1000 N
1000 N force is applied to a car, which will be equal and opposite to the massive wave.
The equal force will act on a car equal to 1000 N.
Learn more about Superposition
https://brainly.com/question/12493909
#SPJ1
Which statement is true about gravitational forces?
Answer:
C: Every mass exerts a gravitational force on every other mass
This statement is true