The fact that galaxies are rotating at about the same velocity from the center to the edge, as opposed to faster near the centers, is evidence that there must be more gravity than that calculated from normal mass.
This observation suggests the presence of dark matter, which contributes to the overall gravitational force in galaxies.
However, observations have shown that the rotation curves of many galaxies remain nearly flat, indicating that the orbital velocities do not decrease as expected.
Instead, they remain roughly constant or increase slightly with distance from the galactic center. This phenomenon is often referred to as the "galaxy rotation problem."
To account for these unexpected rotation curves, astronomers have proposed the existence of dark matter. Dark matter is a hypothetical form of matter that does not interact with light or other forms of electromagnetic radiation, making it invisible and difficult to detect directly.
It is thought to be present in large quantities throughout the universe, including within galaxies.
The presence of dark matter can explain the observed rotation curves because it contributes additional gravitational force to galaxies. This extra gravity from the dark matter allows stars and gas to orbit at higher velocities, even at larger distances from the galactic center.
In other words, the gravitational pull from the combined normal matter (stars, gas, etc.) and dark matter is what keeps the rotation curves flat or rising.
To learn more about universe, refer below:
https://brainly.com/question/9724831
#SPJ11
A) When a submarine dives to a depth of 500 m, how much pressure, (in Pa) must it's hull be able to withstand? b) How many times greater is this pressure than the pressure at the surface. Recall pressure at the surface is atmospheric pressure at sea level which equals 14. 7 psi (101 kPa). Hint when determining how many times greater remember How many times greater factor = BIGGER/ smaller)
A submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.
a) When a submarine dives to a depth of 500 m, the pressure on its hull increases due to the weight of the water above it.
The pressure at this depth can be calculated using the formula [tex]P = \rho gh[/tex], where ρ is the density of seawater, g is the acceleration due to gravity, and h is the depth.
Plugging in the values, we get P = (1025 kg/m³)(9.81 m/s²)(500 m) = 5,068,625 Pa.
b) To determine how many times greater the pressure is at a depth of 500 m compared to the surface, we can divide the pressure at 500 m by the atmospheric pressure at sea level.
Converting 14.7 psi to Pa, we get 101,325 Pa. Dividing 5,068,625 by 101,325 gives us approximately 50 times greater.
In summary, a submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.
To know more about pressure refer here:
https://brainly.com/question/28907914#
#SPJ11
Need helpppp
10 N
10 N
Net Force:
Is it balanced or unbalanced?
net force 20
it's balanced because they are both of the same magnitude
Which two statements describe what happens to the nuclei of atoms during a fusion reaction
During a fusion reaction, two statements that describe what happens to the nuclei of atoms are A small amount of mass in the nuclei that combine is converted to energy and Nuclei with small masses combine to form nuclei with larger masses. The correct option is B and D.
A small amount of mass in the nuclei that combine is converted to energy. During the fusion reaction, when the smaller nuclei combine, a small amount of mass is converted into a significant amount of energy, as described by Einstein's famous equation E=mc². This energy release is what makes fusion reactions so powerful and a potential source of clean energy.
Nuclei with small masses combine to form nuclei with larger masses. In a fusion reaction, lighter nuclei, typically isotopes of hydrogen like deuterium and tritium, combine under high pressure and temperature to form larger nuclei, such as helium. This process is what powers the Sun and other stars, as they fuse hydrogen into helium, releasing energy in the form of light and heat. The correct option is B and D.
To know more about fusion reaction, refer here:
https://brainly.com/question/2554334#
#SPJ11
Complete question:
Which two statements describe what happens to the nuclei of atoms during a fusion reaction?
A. Large nuclei break apart into two or more smaller nuclei.
B. A small amount of mass in the nuclei that combine is converted to energy.
C. Each nucleus formed has fewer protons than each original nucleus had.
D. Nuclei with small masses combine to form nuclei with larger masses.
What is the spring constant of this spring?
Answer: D 400 N/m
Explanation:
Two ice skaters, starting from rest, hold onto the ends of a 10 m pole. A 40-kg player is at one end of the pole and a 60-kg player is at the other end. The players then start pulling themselves along the pole towards each other while sliding without friction on the ice. If the two skaters continue past each other after they meet, what distance will the 60-kg player have moved with respect to the ice when the skaters have exchanged positions with respect to each other?.
The 60-kg player moves 3 meters with respect to the ice when the skaters have exchanged positions with respect to each other.
We can begin by using conservation of momentum to find the speed of the center of mass of the system. Since the system is initially at rest, the total momentum is zero. After the players start pulling themselves along the pole towards each other, they will move towards the center of mass of the system, which will move in the opposite direction to conserve momentum.
We can find the position of the center of mass by using the fact that the system is symmetric. The center of mass must be at the midpoint of the pole, or 5 m from either end.
Let's first find the velocity of the center of mass of the system:
total mass = 40 kg + 60 kg = 100 kg
momentum before = 0
momentum after = total mass × velocity of center of mass
velocity of center of mass = momentum after / total mass
velocity of center of mass = 0 / 100 kg
velocity of center of mass = 0 m/s
Since the velocity of the center of mass is zero, we know that the center of mass will remain in the same position throughout the motion of the players.
Now, let's consider the motion of the players. They will move towards each other with equal and opposite speeds, until they meet at the center of the pole. At this point, the 60-kg player will be moving in the direction of the 40-kg player with the same speed that the 40-kg player was initially moving.
Let's call the distance that the 60-kg player moves d. Then the distance that the 40-kg player moves is 10 m - d.
We can set up an equation to conserve momentum in the horizontal direction:
momentum before = momentum after
(40 kg)×(0 m/s) + (60 kg)×(0 m/s) = (40 kg)×(v) + (60 kg)×(-v)
where v is the speed of the players after they start moving towards each other. The negative sign in front of the 60-kg player's velocity indicates that the player is moving in the opposite direction to the 40-kg player.
Simplifying this equation, we get:
0 = 20 kg × v
v = 0 m/s
This means that the players come to a stop at the center of the pole.
Now we can find the distance that the 60-kg player moves, d:
d / 5 m = 60 kg / 100 kg
d = 3 m
To know more about momentum refer here
https://brainly.com/question/17166755#
#SPJ11
Which circuit would generate 2,016W of power?
Circuit that could generate 2,016W of power is a combination of a voltage source and a resistor.
Assuming a voltage of 220V, a resistance of approximately 24.5 ohms would be required to produce 2,016W of power, according to the formula P = V^2 / R, where P is power, V is voltage, and R is resistance. This circuit could be used for a variety of applications, such as powering a heating element or a high-power LED.
It's worth noting that there are many different types of circuits that could generate 2,016W of power, depending on the specific application and design requirements. In practice, the choice of circuit would depend on factors such as cost, efficiency, and reliability, as well as any specific environmental or safety concerns. Additionally, it's important to carefully consider the design and construction of any high-power circuit to ensure that it operates safely and reliably.
To know more about the Circuit, here
https://brainly.com/question/16571495
#SPJ4
Two identical vessels are taken and painted white and black respectively. Then the same quantity of water is poured into each one of them. Both the vessels are left in the sun, and the temperature is noted regularly. The water is which vessel is likely to get hotter and why?
Answer:
Both the vessels are likely to get heated up to the same temperature since they have the same quantity of water and are exposed to the same amount of sunlight. The color of the vessel (white or black) does not play a significant role in heating the water. However, it is worth noting that black absorbs more light and heat than white due to its higher emissivity and lower reflectivity, but the effect is negligible in this scenario because the water inside the vessels will absorb most of the sunlight regardless of the vessel's color.
Answer:
The black vessel will heat up faster.
Explanation:
When light falls on an object, it can either be absorbed, reflected, or refracted through the object. The color of an object is determined by the wavelengths of light that it absorbs and reflects. A black object appears black because it absorbs all wavelengths of visible light, whereas a white object appears white because it reflects all wavelengths of visible light.
In the case of the two vessels, the black vessel absorbs more of the light and heat from the sun than the white vessel. This is because the black pigment in the paint absorbs a wider range of wavelengths of visible and non-visible light. As a result, more of the energy from the sun is converted into heat, raising the temperature of the water inside the vessel.
In contrast, the white vessel reflects most of the light and heat from the sun, resulting in less energy being absorbed by the water inside the vessel. This is because the white pigment in the paint reflects a wide range of wavelengths of visible light, including the higher energy wavelengths in the ultraviolet and infrared range that contribute to the heating of the vessel.
To read more about the principles of absorption and reflection of light, click the below links:
https://brainly.com/question/3883323
https://brainly.com/question/30935871
Which planet is tilted on its side as it orbits the sun?.
Answer:
Uranus
Explanation:
Microwaves can be used to cook food. If a microwave
oven uses waves that are 1 cm (0. 01 m) long, what is the
frequency of these waves?
Microwaves can be used to cook food. If a microwave oven uses waves that are 1 cm (0. 01 m) long then 3.00 x [tex]10^{10}[/tex] Hz is the frequency of these waves.
The speed of electromagnetic waves (such as microwaves) in a vacuum is approximately 3.00 x [tex]10^{8}[/tex] m/s.
The frequency of a wave is given by the formula
f = c / λ
Where f is the frequency, c is the speed of light, and λ is the wavelength.
In this case, the wavelength is 0.01 m, so we can calculate the frequency as
f = 3.00 x [tex]10^{8}[/tex] / 0.01 = 3.00 x [tex]10^{10}[/tex] Hz
Therefore, the frequency of the microwave waves is approximately 3.00 x [tex]10^{10}[/tex] Hz.
To know more about Microwaves here
https://brainly.com/question/9338148
#SPJ4
Please it due today need help!!!
Gender shifts are actually a common phenomenon in public roles (employment,
entertainment, or otherwise). Identify a role and explain if there is a status change
in the role - as in how these women or non binary folks are treated by the others
in the situation (still treated as women/non-binary or as if they are men-explain).
One example of a role where gender shifts occur is politics. Women and non-binary individuals who enter the political sphere often experience a shift in their status and how they are treated by others. They may be viewed as less competent or capable than their male counterparts, or face discrimination and bias based on their gender identity. However, as more women and non-binary individuals are elected to political positions, there is a growing recognition of their abilities and contributions, and a shift towards greater gender equality in the political realm. Despite this progress, there is still much work to be done to address the systemic barriers that prevent women and non-binary individuals from fully participating in politics and achieving equal status and treatment.
Which vector has an x-component with a length of 2?
c
b
d
a
The vector (2, y) has an x-component with a length of 2.
A vector with an x-component of length 2 can be represented as:
Vector V = (2, y)
In this representation, the x-component of the vector is 2, and the y-component can have any value since it was not specified.
To know more about vector refer here
https://brainly.com/question/24256726#
#SPJ11
You are watching Canada day fireworks from a distance. You observe the light, and then hear the sound 3. 50 seconds later. How far are you from the location of the firework, if the termometer outside of yur home shows a temperature of 5. 00 degrees celcius?
You are approximately 1170.96 meters away from the location of the firework.
We know that the time difference between seeing the light and hearing the sound is 3.50 seconds. The speed of sound in air depends on the temperature, so we need to use the temperature information to calculate the speed of sound. The formula for the speed of sound in air at a given temperature is:
v = 331.3 + 0.606T
where v is the speed of sound in meters per second, and T is the temperature in degrees Celsius.
Substituting T = 5.00 degrees Celsius, we get:
v = 331.3 + 0.606 × 5.00
v = 334.56 m/s
Now we can calculate the distance to the firework using the formula:
d = v × t
where d is the distance, v is the speed of sound, and t is the time difference between seeing the light and hearing the sound.
Substituting v = 334.56 m/s and t = 3.50 s, we get:
d = 334.56 × 3.50
d = 1170.96 m
To know more about temperature, here
brainly.com/question/11464844
#SPJ4
The oxygen molecule has a total mass of 5. 30 × 10-26 kg and a rotational inertia of 1. 94 ×10-46 kg-m2 about an axis through the center perpendicular to the line joining atoms. Suppose that such a molecule in a gas has a mean speed of 500 meters/sec and that its rotational kinetic energy is two-thirds of its translational kinetic energy. Find its average angular velocity
The average angular velocity of the oxygen molecule is 1.28 x 10^12 radians/sec.
The total kinetic energy of the oxygen molecule can be expressed as the sum of its translational and rotational kinetic energies:
KE_total = KE_translational + KE_rotational
Given that the rotational kinetic energy is two-thirds of the translational kinetic energy, we can write:
KE_rotational = (2/3)KE_translational
We also know that the total kinetic energy is related to the mean speed by the formula:
KE_total = (1/2)mv²
where m is the mass of the molecule and v is its mean speed.
Substituting the expressions for KE_rotational and KE_total into this equation, we get:
(5/6)KE_translational = (1/2)mv²
Solving for the translational kinetic energy, we obtain:
KE_translational = (3/5)mv²
The moment of inertia of the oxygen molecule can be related to its angular velocity by the formula:
KE_rotational = (1/2)Iω²
where I is the moment of inertia and ω is the angular velocity.
Substituting the expressions for KE_rotational and I, and solving for ω, we get:
ω = √((2/3)KE_translational / I)
Substituting the expressions for KE_translational, I, m, and v, we obtain:
ω = √((2/9)mv² / I)
Finally, substituting the given values, we get:
ω = 1.28 x 10¹² radians/sec.
To know more about the Angular velocity, here
https://brainly.com/question/13770698
#SPJ4
A 2 ω resistor and a 8.0 mh inductor are used in an lr circuit. if the initial current in the circuit is 2.0 a when a switch is thrown that allows the current in the circuit to decay, at what time will the current be 1.0 a?
The initial current is 2A, resistance is 2Ω, and inductance is 0.008H. The time for current decay to 1A is found to be around 2.1ms using the natural logarithm.
The current in an LR circuit can be modeled by the equation:
[tex]I(t) = I0e^{(-Rt/L)}[/tex]
where I(t) is the current at time t, I0 is the initial current, R is the resistance, L is the inductance, and e is the mathematical constant e.
We are given that the initial current is 2.0 A, the resistance is 2 Ω, and the inductance is 8.0 mH (or 0.008 H). We want to find the time it takes for the current to decay to 1.0 A.
Substituting the given values into the equation, we get:
[tex]1.0 A = 2.0 A \times e^{(-2\Omega t/0.008H)}[/tex]
Simplifying, we can divide both sides by 2.0 A and take the natural logarithm of both sides:
[tex]ln(0.5) = -2\Omega t/0.008H[/tex]
Solving for t, we get:
[tex]t = -0.008H \times ln(0.5) / 2\Omega[/tex]
Plugging in the given values, we get:
[tex]t \approx 0.0021 s[/tex] or 2.1 ms
Therefore, it will take approximately 2.1 ms for the current to decay to 1.0 A.
In an LR circuit, the inductor resists changes in current, so when the switch is thrown and the current starts to decay, the inductor generates a back EMF that opposes the change in current. This causes the current to decay exponentially over time, as described by the above equation.
To know more about resistance refer here:
https://brainly.com/question/30155623#
#SPJ11
A certain one-dimensional conservative force is given as a function of x by the expression F =-kx^3, where F is in newtons and x is in meters. A possible potential energy function U for this force is
Option (D) is correct.
The relation between potential energy(U(x)) and the associated force(F(x)) can be given as,
F(x) = (-)(dU/dx)
Therefore,
[tex]dU = (-) \int\limits^x_0{F(x)} .\, dx[/tex]
On putting, F(x) = (-)kx^3, and integrating, we have
[tex]U = \frac{1}{4}.k.x^{4}[/tex]
So, a possible energy function U for this force is, U = ((k.x^4)/4).
Thus, option (D) is correct.
Read more about force and potential energy at:
https://brainly.com/question/29998972
If a object is placed between a convex lens and its focal point, the image formed is:.
If an object is placed between a convex lens and its focal point, the image formed will be virtual, upright, and enlarged.
In this case, the rays of light from the object will diverge after passing through the lens. These diverging rays will appear to come from a point behind the lens, creating a virtual image that is larger than the object and appears upright.
This type of image is known as a virtual image because the rays of light do not actually converge at the location of the image. Instead, they appear to diverge from the location of the image when they are traced back to the lens.
To know more about convex lens refer here
https://brainly.com/question/27087947#
#SPJ11
Consider the two-slit experiment. Light strikes two slits that are a distance 0. 0236 mm apart. The path to the third-order bright fringe on the screen forms an angle of 2. 09° with the horizontal. What is the wavelength of the light?
The wavelength of the light used in the experiment is approximately 5.69 × [tex]10^{-7}[/tex] meters.
In the two-slit experiment, the distance between the slits is known as the "d" value. The distance from the slits to the screen is known as the "L" value.
The third-order bright fringe is at the center of the third bright band on the screen. Using the formula, d sinθ = mλ, where d is the distance between the slits, θ is the angle between the center of the third-order bright fringe and the horizontal, m is the order of the bright fringe, and λ is the wavelength of light.
We know that d = 0.0236 mm, θ = 2.09°, and m = 3. Rearranging the formula to solve for λ, we get: λ = d sinθ / m
Substituting the values, we get: λ = (0.0236 mm) sin(2.09°) / 3
Converting the distance to meters and the angle to radians, we get: λ = (2.36 × 10^-5 m) sin(0.0364 rad) / 3
Solving this equation gives us: λ = 5.69 × [tex]10^{-7}[/tex] m
Therefore, the wavelength of the light used in the experiment is approximately 5.69 × [tex]10^{-7}[/tex] meters.
To know more about wavelength, refer here:
https://brainly.com/question/13533093#
#SPJ11
What is the intensity of sound 4m away from a 500w speaker?. How much energy is absorbed by the eardrum per minute if the surface area of the ear is 600mm²
The intensity of sound at 4 m from a 500 W speaker is found using the inverse square law of sound propagation. Therefore, the energy absorbed by the eardrum per minute is approximately 0.107 millijoules.
The intensity of sound is the power per unit area and is given by the formula I = P/A, where I is intensity, P is power and A is the surface area. Given that the speaker has a power of 500 W and the distance is 4 m, we can find the intensity of sound using the inverse square law of sound propagation.
[tex]I = P/(4\pi r^{2} )[/tex]
[tex]I = 500/(4\pi \times 4^{2} )[/tex]
I = 4.93 W/m²
Therefore, the intensity of sound at a distance of 4 m from the speaker is 4.93 W/m².
To calculate the energy absorbed by the eardrum per minute, we need to first convert the intensity to units of energy per time per area, which is given by the formula E = ItA, where E is energy, t is time, and A is the surface area.
The energy absorbed per minute is:
E = ItA
[tex]E = 4.93 W/m^{2} \times 60 s/min \times 600\;mm^{2} \times (1 m / 1000\;mm)^{2}[/tex]
E = 0.107 mJ/min
Therefore, the energy absorbed by the eardrum per minute is approximately 0.107 millijoules.
In summary, the intensity of sound at 4 m from a 500 W speaker is found using the inverse square law of sound propagation. The energy absorbed by the eardrum per minute is calculated by converting the intensity to units of energy per time per area and using the surface area of the ear.
To know more about inverse square refer here:
https://brainly.com/question/30404562#
#SPJ11
Cliff height you are climbing in the high sierra where you suddenly find yourself at the edge of afog shrouded cliff to find the height of this cliff you drop a rock from the top and 10.0s later hear the sound of it hitting the ground at the foot of the cliff
The height of the cliff is approximately 490 meters (or about 1,607 feet).
To find the height of the cliff, we can use the kinematic equation:
[tex]h = 1/2 * g * t^2[/tex]
where h is the height of the cliff, g is the acceleration due to gravity (which is approximately 9.8 m/s²), and t is the time it takes for the rock to hit the ground.
In this case, we know that the time it takes for the rock to hit the ground is 10.0 seconds.
So we can plug in the values:
[tex]h = 1/2 * 9.8 m/s^2 * (10.0 s)^2[/tex]
h = 490 m
To know more about kinematic equation refer here
https://brainly.com/question/28712225#
#SPJ11
A harmonic wave travels in a wire with amplitude 2.51 mm, wavelength 1.09 m, and frequency 649 hz. what is the speed with which the wave travels
The speed with which the harmonic wave travels in the wire is approximately 707.41 meters per second.
To find the speed of a harmonic wave traveling in a wire, we need to use the following formula:
Speed (v) = Wavelength (λ) * Frequency (f)
In this case, we are given the amplitude, wavelength, and frequency of the wave. The amplitude (2.51 mm) is not necessary to calculate the speed, so we can focus on the wavelength and frequency:
Wavelength (λ) = 1.09 m
Frequency (f) = 649 Hz
Now, we can use the formula to calculate the speed of the wave:
Speed (v) = 1.09 m * 649 Hz
Multiplying the wavelength and frequency together:
v = 707.41 m/s
For more about speed:
https://brainly.com/question/28224010
#SPJ11
Design a two-stage band-pass filter using two 1Ω resistors and two 1 capacitors (i. E. A circuit where the transfer function drops to zero at low and high frequencies and passes a range of frequencies in-between)
The lower and upper half-power frequencies of the filter are both equal to 1 Hz.
A two-stage band-pass filter can be designed using two resistor-capacitor (RC) filter stages, as shown below(image attached):
In this circuit, the input voltage is applied to the first RC stage, consisting of R1 and C1, which is followed by a second RC stage consisting of R3 and C2. The output of the second stage is then fed to a load resistor RLoad.
The transfer function of this circuit can be found by analyzing each RC stage separately and then cascading their transfer functions. The transfer function of an RC stage is given by:
H(s) = 1 / (1 + sRC)
where s is the complex frequency variable and RC is the time constant of the RC circuit.
The transfer function of the first stage is:
H1(s) = 1 / (1 + sR1C1)
The transfer function of the second stage is:
H2(s) = 1 / (1 + sR3C2)
The overall transfer function of the two-stage band-pass filter is the product of the transfer functions of the two stages:
H(s) = H1(s) * H2(s)
Substituting the component values, we get:
H1(s) = 1 / (1 + s(1Ω)(1F)) = 1 / (1 + s)
H2(s) = 1 / (1 + s(1Ω)(1F)) = 1 / (1 + s)
H(s) = H1(s) * H2(s) = 1 / (1 + s)²
The frequency response of the filter is given by:
|H(jω)| = 1 / sqrt((1 - ω²)² + 4ζ²ω²)
where ω is the angular frequency, given by ω = 2πf, and ζ is the damping ratio, given by ζ = 1/2.
At the half-power frequencies, the magnitude of the transfer function drops to 1/√2 of its maximum value. Setting |H(jω)| = 1/√2 and solving for ω, we get:
ω1 = 1 / (R1C1) = 1 / (1Ω * 1F) = 1 rad/s
ω2 = 1 / (R3C2) = 1 / (1Ω * 1F) = 1 rad/s
As a result, the filter's bottom and upper half-power frequencies are both equal to 1 Hz.
To know more about the Band-pass filter, here
https://brainly.com/question/31771626
#SPJ4
Jose conducted an experiment to measure the rate of minerals dissolving in water and changed the temperature of the water for each trial.
What is the independent variable in this experiment?
A: number of trials being tested
B: temperature of the water
C: type of minerals used for each trial
D: rate the minerals dissolved
Answer: B. Temperature of water
Explanation:
An independent variable is "the variable that is changed or controlled in a scientific experiment or a mathematical or statistical model" and "It is the variable that the researcher chooses and that may affect the dependent variable"
The Temperature of the water is only affected by Jose thus it is a independent variable
Which, if any, of these scenarios produce a real image? which, if any, of these scenarios produce a virtual image?.
A real image is formed when the light rays converge and actually intersect at a point, allowing the image to be projected onto a screen. A real image can be captured or observed by placing a screen or a photographic plate at the location of the image.
A virtual image, on the other hand, is formed when the light rays only appear to diverge from a point behind the optical system. It cannot be projected onto a screen but can be observed by looking through the optical system.
Now, without specific scenarios mentioned, it is not possible to provide a definitive answer. The characteristics of the image depend on the specific optical system, such as the type of lens or mirror being used, the object's position, and the distance between the object and the optical system.
In some scenarios, a lens or mirror might produce a real image if the object is placed at a specific distance from the lens or mirror. In other cases, the same lens or mirror might produce a virtual image if the object is placed at a different distance.
To determine whether a scenario produces a real or virtual image, it is necessary to specify the details of the optical system and the object's position relative to it.
To know more about virtual image refer here
https://brainly.com/question/13197137#
#SPJ11
Puck A and puck B are free to slide without friction on a horizontal air table; the mass of puck A has been measured to be 165. 0 grams , but the mass of puck B is unknown. The pucks are made of super-ball like material, so any collision between them should be elastic. An experiment is done with puck B at rest at the center of the air table, and with puck A sent at 55. 0 cm/s to make a glancing collision with puck B. After the collision, puck A is measured to have a speed of 29. 0 cm/s , and is observed to have been deflected by 27. 0 degrees from its original direction. What was the y component of puck B's momentum after the collision?
The y component of puck B's momentum after the collision is 0 g cm/s.
What is momentum?Momentum is the quantity of motion of a moving object, measured as a product of its mass and velocity. In physics, it is a conserved quantity, meaning that the total momentum of a closed system remains constant, regardless of the interactions within the system. Momentum can be transferred from one object to another, or between objects and their environment. Momentum is the driving force behind many physical phenomena, including collisions, friction, rocket propulsion, and the orbits of planets and stars.
[tex]p_A[/tex] (before) = [tex]m_A[/tex] * [tex]v_A[/tex] = 165.0 g * 55.0 cm/s = 9077.5 g cm/s
[tex]v_A[/tex] (x) = [tex]v_A[/tex] * cos(27.0°) = 29.0 cm/s * cos(27.0 °) = 27.61 cm/s
[tex]v_A[/tex] (y) = [tex]v_A[/tex] * sin(27.0 °) = 29.0 cm/s * sin(27.0 °) = 14.26 cm/s
Using these components, we can calculate the momentum of puck A after the collision:
[tex]p_A[/tex] (after) = [tex]m_A[/tex] * [tex]v_A[/tex] = 165.0 g * 27.61 cm/s = 4562.1 g cm/s
[tex]p_A[/tex] (before) + [tex]p_B[/tex] (before) = [tex]p_A[/tex] (after) + [tex]p_B[/tex] (after)
9077.5 g cm/s + [tex]p_B[/tex] (before) = 4562.1 g cm/s + [tex]p_B[/tex] (after)
[tex]p_B[/tex] (before) = 4562.1 g cm/s - 4562.1 g cm/s = 0
Since the momentum of puck B before the collision was 0, its momentum after the collision must also be 0. Therefore, the y component of puck B's momentum after the collision is 0 g cm/s.
To learn more about momentum
https://brainly.com/question/1042017
#SPJ4
A thermodynamicist claims to have developed a heat pump with a cop of 1. 7 when operating with thermal energy reservoirs at 273 k and 293 k. Is this claim valid?.
The calculated COP of approximately 14.65 is significantly different from the claimed COP of 1.7. Therefore, the claim made by the thermodynamicist is not valid. The actual COP of the heat pump, based on the given temperatures, is much higher than the claimed value.
To determine the validity of the thermodynamicist's claim regarding the Coefficient of Performance (COP) of their heat pump, we need to calculate the COP based on the given information and compare it to the claimed value.
The COP of a heat pump is defined as the ratio of the desired heat transfer (Qh) to the input work (Win):
COP = Qh / Win
Given:
Temperature of the cold reservoir (Tc) = 273 K
Temperature of the hot reservoir (Th) = 293 K
COP claimed by the thermodynamicist = 1.7
To calculate the COP, we need to know the heat transfer ratio between the hot and cold reservoirs. In a heat pump, heat is transferred from the cold reservoir to the hot reservoir against the natural flow of heat.
For an ideal heat pump, the COP is given by:
COP = Th / (Th - Tc)
Plugging in the given values:
COP = 293 K / (293 K - 273 K)
COP = 293 K / 20 K
COP ≈ 14.65
To know more about thermodynamicist refer here
https://brainly.com/question/29449209#
#SPJ11
What is the average current in the 120 v power line to the house? express your answer to three significant figures and include the appropriate units
The average current in a 120 V power line to a house is typically around 15 amps, give or take a few amps depending on the power consumption of the household.
The average current in a 120 V power line to a house can vary depending on the power consumption of the household. However, we can use Ohm's law to calculate an estimate of the current. Ohm's law states that current is equal to voltage divided by resistance (I = V/R). In this case, we can assume that the resistance is equal to the resistance of the wiring, which is typically very low.
Using this formula, we can calculate the current as I = 120 V / R. The value of R can vary depending on the size and type of wiring used, but for residential wiring, it is typically around 0.1 ohms.
Therefore, I = 120 V / 0.1 ohms = 1200 amps.
However, it's important to note that this calculation assumes a very low resistance in the wiring and doesn't take into account the actual power consumption of the household. In reality, the current will vary based on the power being consumed by the appliances in the house.
In practice, the current will typically be much lower, usually in the range of 10-20 amps for an average household. It's important to note that the current can still spike much higher than this during power surges or when large appliances are turned on.
To learn more about power line
https://brainly.com/question/28430509
#SPJ4
Scenario: You place a cold metal sphere in a container of hot water.
(a) Type(s) of energy transfer:
(b) Where will each form of transfer occur?
(c) What will happen and why?
4. Scenario: You place a piece of hot rock into a metal container, and then remove all the
air from the container.
(a) Type(s) of energy transfer:
(b) Where will each form of transfer occur?
(c) What will happen and why?
In the first scenario, heat transfers from hot water to a cold metal sphere until they reach thermal equilibrium. In the second scenario, heat and radiation occur from a hot rock to a metal container with no air until they reach thermal equilibrium.
For the scenario where a cold metal sphere is placed in hot water:
(a) The type of energy transfer is heat transfer.
(b) The transfer will occur from the hot water to the cold metal sphere, resulting in a decrease in the temperature of the water and an increase in the temperature of the sphere.
(c) The heat energy from the water will flow to the sphere until the two objects reach a state of thermal equilibrium, meaning they are at the same temperature. This occurs because heat naturally flows from hotter objects to cooler ones.
For the scenario where a hot rock is placed in a metal container with all the air removed:
(a) The type of energy transfer is both heat transfer and radiation.
(b) Heat transfer will occur from the hot rock to the metal container, while radiation will occur from the rock to the surrounding environment.
(c) The hot rock will lose heat energy to the metal container until they reach thermal equilibrium. Additionally, as the rock cools, it will emit electromagnetic radiation in the form of infrared waves. Because there is no air in the container, convection, another form of heat transfer, cannot occur.
To know more about thermal equilibrium refer here:
https://brainly.com/question/14556352#
#SPJ11
Two large speakers broadcast the sound of a band tuning up before an
outdoor concert. While the band plays an A whose wavelength is 0. 773 m,
Brenda walks to the refreshment stand along a line parallel to the speakers. If
the speakers are separated by 12. 0 m and Brenda is 24. 0 m away, how far
must she walk between the "loudspots"?
Two large speakers broadcast the sound of a band tuning up before an outdoor concert.While the band plays an A whose wavelength is 0. 773 m, Brenda walks to the refreshment stand along a line parallel to the speakers. If the speakers are separated by 12. 0 m and Brenda is 24. 0 m away then 0.387 meters must she walk between the "loudspots".
Since the wavelength of the sound wave is known, we can use the concept of interference to find the distance between the "loudspots". At the point of maximum constructive interference, the waves from both speakers will add up, creating a louder sound. At the point of maximum destructive interference, the waves will cancel each other out, creating a quieter sound.
Let d be the distance that Brenda needs to walk to reach the point of maximum constructive interference between the two speakers. At this point, the waves from both speakers will add up to create a louder sound. The path difference between the waves from the two speakers at this point will be exactly one wavelength.
Using the Pythagorean theorem, we can find the distance between Brenda and each of the speakers:
Distance from Brenda to speaker 1 = [tex]\sqrt{24^{2} +6^{2} }[/tex] = 24.6 m
Distance from Brenda to speaker 2 = [tex]\sqrt{24^{2}+18^{2} }[/tex]= 30 m
The path difference between the waves from the two speakers at the point of maximum constructive interference will be:
Path difference = distance from Brenda to speaker 2 - distance from Brenda to speaker 1
Path difference = 30 m - 24.6 m = 5.4 m
Since the path difference is exactly one wavelength, we have
Wavelength = path difference = 0.773 m
Therefore, the distance that Brenda needs to walk to reach the point of maximum constructive interference is
d = wavelength/2 = 0.773 m/2 = 0.387 m
So Brenda needs to walk 0.387 meters between the "loudspots".
To know more about broadcast here
https://brainly.com/question/14696041
#SPJ4
A cheetah has 5 joules of kinetic energy and runs up a 5 m hill. When it gets to the top of the hill, it stops. What is the gravitational potential energy of the cheetah?
At the top of the hill, the cheetah has gravitational potential energy of about 5.02 joules. The gravitational potential energy of the cheetah at the top of the hill can be calculated using the formula E=mgh, where E is the potential energy, m is the mass of the cheetah, g is the acceleration due to gravity (which is approximately 9.8 m/s^2), and h is the height of the hill.
Since we don't have information about the mass of the cheetah, we can't use this formula directly. However, we do know that the cheetah used all of its kinetic energy to climb the hill. So, we can use the fact that the work done by the cheetah to climb the hill (which is equal to its initial kinetic energy) is equal to the change in gravitational potential energy:
W = ΔE
where W is the work done and ΔE is the change in energy.
In this case, W = 5 J (the initial kinetic energy of the cheetah), and ΔE is the change in gravitational potential energy. Since the cheetah started at ground level and climbed to a height of 5 m, the change in height (h) is 5 m.
So, we can calculate the gravitational potential energy of the cheetah as:
ΔE = mgh
5 J = m(9.8 m/s^2)(5 m)
Solving for m, we get:
m = 0.102 kg
Now that we know the mass of the cheetah, we can use the formula E=mgh to calculate the gravitational potential energy:
E = (0.102 kg)(9.8 m/s^2)(5 m)
E = 5.02 J
Therefore, the gravitational potential energy of the cheetah at the top of the hill is approximately 5.02 joules.
Know more about gravitational potential energy here:
https://brainly.com/question/3884855
#SPJ11
since we varied both initial velocity and mass, does it appear that conservation of momentum and conservation of energy hold across all trials regardless of initial conditions? you can look at individual trials, sets of trials with similar conditions, as well as the means across all elastic trials. are there any patterns? for example, did higher mass or faster velocities do a better job of showing momentum or kinetic energy conservation? if so, why might this be?
The total kinetic energy of the system before the collisions was equal to the total kinetic energy of the system after the collisions.
It appears that both conservation of momentum and conservation of energy hold across all trials regardless of initial conditions. This can be inferred from the fact that the elastic collisions were perfectly elastic, meaning that there was no loss of kinetic energy during the collisions. As a result, the system's total kinetic energy before the collisions was equal to the system's total kinetic energy after the collisions.
As for the conservation of momentum, this can be confirmed by calculating the momentum of the system before and after each collision and comparing the results. In a perfectly elastic collision, the total momentum of the system is conserved, which means that the momentum before the collision is equal to the momentum after the collision.
There do not appear to be any significant patterns based on the information provided regarding whether higher mass or faster velocities did a better job of showing momentum or kinetic energy conservation. However, it is important to note that in a perfectly elastic collision, both momentum and kinetic energy are conserved regardless of the initial conditions of the system.
To know more about the Momentum, here
https://brainly.com/question/29579131
#SPJ4