Answer:
The Alleles gene shows up even when inherited only from one parent
Explanation:
The two alleles in a gene pair are inherited, one from each parent. Alleles interact with each other in different ways. These are called inheritance patterns.
i hope this helped
reasons why large quantities of electricity is used for down's cell
1.High energy demands: Down's cells require a large amount of energy to function effectively. The process of creating and maintaining the cells requires significant energy inputs to power equipment, lighting, heating, and cooling systems.
2.Manufacturing processes: Many of the processes involved in creating and maintaining Down's cells are energy-intensive. This includes cell replication, gene manipulation, and tissue culture.
3.Complex equipment: The equipment required for Down's cell research and production is often complex and requires significant energy inputs to operate. This includes centrifuges, microscopes, and other specialized equipment used in the lab.
4.Climate control: Down's cells must be kept at specific temperatures and humidity levels to maintain their integrity. This requires the use of energy-intensive climate control systems to maintain optimal conditions.
5.Data storage and processing: With the growing amount of data generated by Down's cell research, large quantities of electricity are also needed to store and process the data.
6.Extensive research and development: Down's cells are a relatively new area of research, which means that large amounts of electricity are used to power experimentation and the testing of new techniques and methods.
To learn more about electricity:-
https://brainly.com/question/776932
Do the same enthalpy calculation for the products of the reaction, CO2+2H2O. Carefully count how many of each bound there is, and consider whether bonds are single or double bonds. Show work!!!!!! and list the totalbond enthalpy of the products.
The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C
What is the enthalpy of the reaction?We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.
We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;
Energy of bonds that are broken - Energy of bonds that are formed.
[4(410) + 2(496)] - [2(805) + 2(460)]
(1640 + 992) - (1610 + 920)
2632 - 2530
= +102 kJ/mol
Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
The heat of combustion of CH4 is 890. 4 kJ/mol and the heat capacity of H2O is 75. 2 J/mol×K.
Part A
Find the volume of methane measured at 298 K and 1. 45 atm required to convert 1. 50 L of water at 298 K to water vapor at 373 K
The volume of methane is 69.15L.
Heat (Q) of methane =Heat(Q) of water
Q = mcΔt
water mass = volume(V) × pressure(P)
1L×1kg/L=1kg
298 K to 373k = 25°C to 100 °C
c water = 75.2J/mol K =4.2 J/g °C = 4200 J/kg °C
Heat of water (Q) = 1×4200 (100 -25)
Heat of water (Q) = 315000J
∴ Heat of methane = Heat of water = 315000 J
= 315 KJ
n (mol) methane = ΔH/Q
890.4/315 = 2.83
According to the ideal gas law,
PV = nRT
Where;
P = Pressure
V = Volume
n = amount of substance
R = ideal gas constant
T = temperature
Now,
V = nRT/P
V = 2.83 × 0.082 ×298/1
V = 0.23206 ×298/1
V = 69.15L
To know more about Volume, click here:
brainly.com/question/1578538
#SPJ4
colour of anhydrous copper II sulphate
Answer:
White color
Explanation:
This compound when heated losses its water of crystallization and become anhydrous copper sulphate
The quantity of matter in a body,object,or substance.Mass is measured in the metric system in units if grams kilograms ,milligrams,etc is it A. Work or B.Mass?
The quantity of matter in a body,object,or substance is B. Mass.
What is Mass?A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely believed to be related to the amount of matter in a physical body.
It is the most fundamental characteristic of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is present in a body. The kilogram is the SI unit of mass (kg). A body's mass does not alter at any point in time.
Learn more about mass on:
https://brainly.com/question/837939
#SPJ1
Since the reduction potential of ions is different, electrolysis can be used to selectively plate out one of the ions in a mixture. A 1.0 L solution containing 0.101 M NiBr2?aq) and 0.407 M CuBr2aq) is subjected to electrolysis. How much time (in hours) would it take to selectively plate out of the cations at a current of 5.0 A? Express your answer numerically to three sig figs in units of hours.
22.2 seconds will it take to selectively plate out of the cations current of 5.0 Amperes.
E∘cell=E∘cathode−E∘anode it is the formula for finding out the net cell potential of the electrolytic cell. We can write the cell reaction to solve the problem in the following way
1. Write down the (two half) reactions.
2. Balance the (half) reactions (Mass and Charge):
a. Start with elements other than H and O. b. Balance O by adding water.
c. balance H by adding H+.
d. Balancing charge by adding electrons.
(3. Multiply each half reaction to make the number of electrons equal.
4. Add the reactions and simplify.)
To know more about current here
https://brainly.com/question/1100341
#SPJ4
Draw a structural formula for the major organic product of the reaction shown below. CH3 - I + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer. Draw a structural formula for the major organic product of the reaction shown below
CH3(CH2)eCH2Br + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer.
The organocopper and inorganic ion by-products are not shown in this structural formula.
CH3CH=CH2Li
1. The reaction starts with CH3CH2CH2Br, which is a bromoalkane.
2. The bromine atom is replaced by a lithium atom with the help of two equivalents of copper.
3. The resulting product is CH3CH=CH2Li, which is an alkenyllithium compound.
CH3CH=CH2Li
The reaction starts with CH3CH2CH2Br, a bromoalkane. The bromine atom is replaced by a lithium atom with the help of two equivalents of copper. This is done via a nucleophilic substitution reaction, where the copper serves as a Lewis acid to facilitate the reaction. The resulting product is CH3CH=CH2Li, an alkenyllithium compound. This is the major organic product of the reaction and it has an E/Z stereochemistry. The organocopper and inorganic ion by-products are not shown in this structural formula.
learn more about organocopper here
https://brainly.com/question/20726790
#SPJ4
For the homogeneous solution consisting of KCl and H2O, indicate the type of forces that are involved. Check all that apply. View Available Hint(s) dipole-dipole forces ion-dipole forces dispersion forces hydrogen bonding Submit Previous Answers X Incorrect; Try Again; 9 attempts remaining
For the homogeneous solution consisting of KCl and H₂O, the type of forces that are involved is the dipole-dipole forces, the ion-dipole forces dispersion forces, the hydrogen bonding.
In the homogeneous solution if the two compounds are KCl and H₂O, they both polar and the forces involved are dipole - dipole forces and the dispersion forces. the forces present in between the water molecules is the hydrogen bonding. the forces in between the K⁺ and the Cl⁻ present is the ion - dipole forces,
Thus the all the four forces present in the homogeneous solution of the KCl and H₂O that is the dipole-dipole forces, the ion-dipole forces, the dispersion forces, and the hydrogen bonding.
To learn more about forces here
https://brainly.com/question/7033619
#SPJ4
Scientists are trying to produce a chemical reaction using two substances. After observing the substances, they realize that there is not
enough energy to make the reaction they had hoped for. In this case, what would they need to add to the mixture to produce a quicker
reaction?
O A base
O An acid
O UV light
O A catalyst
Answer: NOT a base
Explanation: i just took the exam and got this one wrong but i donno the correct answer between the last 3 good luck bb
Answer:
A catalyst
Explanation:
Catalysts make reaction faster and speed up the reaction time.
Select the correct answer.
An iron nail is made up of particles. What is true about the particles?
A.They move all over the place.
B.The force of attraction between them is small.
C.The spacing between them
is large.
D. They stay in place and vibrate.
What is true about the particles?
D. They stay in place and vibrate.
What is an atom?
A An atom is a round spherical object found inside most objects made of
matter
B. An atom is a round spherical object found inside objects made of matter
C. An atom is a basic building block of matter.
D. An atom is a subunit of longer extended structures.
Explanation:
what is an atom?
An atom is a basic building block of matter.
what is hydrological plant ??
Answer:
Hydrological plant is a process in which plants needs water to complete the process to produce glucose in the presence of CO2 ,sunlight .plants needs water to survive .
The respiratory system transfers what to the blood that is used by the cells of the body in order to produce energy?
Answer:
the answer is oxygen and carbon dioxide
Oil of vitriol is a substance that humankind has known of for thousands of years! Today the substance is known by it's scientific name sulfuric acid and has the molecular formula H2SO4. What is the molar mass of H2SO4
The molar mass of H2SO4 is 98.08 g/mol. It is a combination of hydrogen with molecular weight of 1g, sulfur with 32g and oxygen with 16g and the total combination is 2x1+1x32+4x16 = 98g.
Humanity has been aware of oil of vitriol for thousands of years. The chemical name for this material is sulfuric acid, and its molecular formula is H2SO4. It is made up of sulfur, oxygen, and hydrogen molecules. Strong and hygroscopic sulfuric acid (H2SO4) has oxidizing and hygroscopic characteristics. Because it was made by roasting "green vitriol" (iron(II) sulfate) in an iron retort, sulfuric acid was known as "oil of vitriol" by medieval European alchemists. Due to its oily appearance and occurrence in vitreous or glassy substances like ferrous sulphate and alum, it is also known as the "oil of vitriol."
To learn more about sulfuric acid click here https://brainly.com/question/29303579
#SPJ4
9. Convert 17.92 L of CO to grams:
C- 12.011
0-15.999
Answer in FOUR Sig Figs with Units
Answer:
its correct answer is 22.4 grams
When a water molecule is split, which part of it is used to make fuels? a. the electrons and protons from the hydrogen b. the electrons and protons from the oxygen c. the electrons and protons from the carbon dioxide d. the ATP
When a water molecule is split, part of it is which used to make fuels is : a.) the electrons and protons from the hydrogen.
How does water split?The water molecules break down into hydrogen and oxygen at the atomic level during thermolysis. For instance, around 3% of all H2O dissociates into different combinations of hydrogen and oxygen atoms at 2200 °C, primarily into H, H2, O, O2, and OH.
Water splitting is the chemical reaction where water is broken down into oxygen and hydrogen: 2 H2O → 2 H2 + O2
Efficient and economical water splitting could be a technological breakthrough that could underpin hydrogen economy, based on green hydrogen. A version of water splitting occurs in photosynthesis also but hydrogen is not produced.
To know more about water splitting, refer
https://brainly.com/question/9982407
#SPJ4
Do help me become a detective, would it matter if I chose triple science or not?
Answer:
no
Explanation:
What is the wavelength of a light of frequency 6.42 x 1014 Hz?
O A. 598 nm
B. 467 nm
O C. 502 nm
D. 425 nm
Answer:
467 nm is the answer
Explanation:
IT'S the answer for
A gas has a volume of 6.35 L at 88.6 kPa. What will be the volume at standard pressure? Standard Pressure = 101.3 kPa
Answer:
5.55 L
Explanation:
This excersise can be solved by the Boyle's law.
This law for gases states that the pressure of a gas in a vessel is inversely proportional to the volume of the vessel.
P₁ . V₁ = P₂ . V₂
The law comes from the Ideal Gases Law, in the first term.
P . V = n . R . T In this case, n . R . T are all constant.
6.35 L . 88.6 kPa = 101.3 kPa . V₂
V₂ = (6.35 L . 88.6 kPa) / 101.3 kPa
V₂ = 5.55 L
It is inversely proportional because, as it happened in this case, pressure was increased, therefore volume decreased.
Explain why in the early morning just before dawn breaks, the temperature of the air
suddenly drops.
Answer:
Once the sun comes up, the sunlight excites the cold air in the first foot or so above the ground (which can be 10 or more degrees colder), which causes it to move around and mix into the next several feet of air. That “mixing upward” drops the temperature of the air at thermometer level.
Explanation:
A coffee cup calorimeter is filled with 200. 0 mL of water at 22. 1°C. A piece of metal at 48. 6°
°
C with a mass of 5. 1 g is added. The final temperature of the water in the calorimeter is 26. 8°C. The density of liquid water is 1. 00 g/mL, and its specific heat capacity is 4. 18 J/(g°C). Determine the specific heat capacity of the metal
The specific heat capacity of the metal is 35.34 J/g/°C, if the specific heat capacity of the water is 4.18 J/g/°C.
Volume of water = 200 ml
Density of water = 1 gm/ml
So the mass of the water in coffee cup, m₁ = 200×1 = 200 gm
Initial temperature of water, T₁ = 22.1°C
Specific heat capacity of water, S₁ = 4.18 J/g/°C
Mass of the metal, m₂ = 5.1 gm
Initial temperature of the metal, T₂ = 48.6°C
Final combined temperature of both, T = 26.8°C
Let the specific heat capacity of the metal = S₂
Heat gain by the water = heat loss in the metal
S₁ × m₁ × (T-T₁) = S₂ × m₂ × (T₂-T)
4.18 × 200 × (26.8-22.1) = S₂ × 5.1 × (48.6-26.8)
3929.2 = S₂ × 111.18
S₂ = 3929.2/111.18
S₂ = 35.34 J/g/°C
So, the specific heat capacity of the metal is 35.34 J/g/°C.
To know more about specific heat capacity, here
https://brainly.com/question/29766819
#SPJ4
PLEASE HELP!!
Consider the following intermediate chemical equations.
C(s) + O2(g) → CO2(g) AH, --393.5kJ
2CO(g) + O2(g) → 2CO2(g) AH, --566.0kJ
2H2O(g) → 2H2(g)+O2(g) AH2 - 483.6 kJ
The overall chemical equation is C(s) + H2O(g) → CO(g) +H2(g). To calculate the final enthalpy of the overall chemica
equation, which step must occur?
Reverse the first equation, and change the sign of the enthalpy. Then, add.
O Reverse the second equation, and change the sign of the enthalpy. Then, add.
O Multiply the first equation by three, and triple the enthalpy. Then, add.
O Divide the third equation by two, and double the enthalpy. Then, add.
Answer:
answer is option 2 hope it helps
The step that must be occurred in the calculation of the enthalpy of the given reaction is option B, reverse the second equation, and change the sign of the enthalpy, then add.
What is enthalpy of a reaction ?The enthalpy of a reaction is the heat energy absorbed or released by the reaction system. For a reaction, the reaction enthalpy can be calculated using the enthalpies of the component reactions.
Here the overall reaction is the formation of CO and H₂ from C and water. The first step is to reverse the second equation and change sign of enthalpy and double the first equation. Then add them, so that the CO₂ get eliminated.
Then, the resultant equation is halved again. Then divide the third equation by two and its enthalpy value also divided by 2. Then add it to the previous one and we get the net equation and corresponding reaction enthalpy.
Therefore, the step that must occur here is option B.
Find more on reaction enthalpy:
https://brainly.com/question/1657608
#SPJ5
diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are important because they make up a significant portion of the Earth's atmosphere and are crucial for many biological and chemical processes.
Diatomic elements are elements that exist in nature as molecules made up of two atoms of the same element, such as H2, O2, N2, and F2.
A diatomic atom is one that cannot exist on its own. There are no single O atoms floating around in the sky. Because O atoms must exist in pairs, oxygen occurs as O2. These atoms are too unstable to live on their own.
This elements are different from other elemental substances because they are composed of multiple atoms of the same element, rather than a single atom or a mixture of different elements.
Learn more about diatomic elements here:https://brainly.com/question/23162019
#SPJ4
How many kJ of heat energy would be absorbed when 175.0g of ethanol, C2H5OH,
vaporizes at its boiling point, given the enthalpy of vaporization of ethanol is 39.3
kJ/mol?
Answer:We want the enthalpy associated with the reaction.........
Explanation:
H
3
CCH
2
OH
(
l
)
+
Δ
→
H
3
CCH
2
OH
(
g
)
You have a mass of
50.0
⋅
g
EtOH
, that is assumed to be at
78.3
∘
C
, and the enthalpy of vaporization is calculated by the product:
Δ
H
∘
vaporization
=
50.0
⋅
g
46.07
⋅
g
⋅
m
o
l
−
1
×
38.6
⋅
k
J
⋅
m
o
l
−
1
=
Explanation:
How many moles is 25g?
25 grams of a substance is equivalent to 0.0088 moles. To calculate the number of moles, the following equation can be used:
Number of moles = mass (in grams) / molar mass
The molar mass is the mass of 1 mole of a substance and is expressed in grams/mol. It is equal to the sum of the atomic masses of all the atoms in a molecule.
To calculate the number of moles from 25 grams, the molar mass of the substance must be known. Once the molar mass is known, the equation can be used to calculate the number of moles.
For example, if the substance is sodium chloride (NaCl), the molar mass is 58.44 g/mol. Applying the equation above, the number of moles can be calculated as 25 g / 58.44 g/mol = 0.0088 moles.
In conclusion, 25 grams of a substance is equal to 0.0088 moles. The molar mass of the substance must be known to calculate the number of moles from a given mass. Once the molar mass is known, the equation can be used to calculate the number of molecules.
Learn more about moles:
https://brainly.com/question/28037816
#SPJ4
1. Write the complete chemical symbol for
the ion with 37 protons and 36 electrons.
Answer:
37 - Rubidium - Rb
Explanation:
How many molecules are in 0.25 mole of CO?
A. 6.0 x 1023
B. 1.5 X 1023
C. 9.0 x 1023
D. 3.0 x 1023
Rounded to the nearest significant figure, [tex]\rm 1.5 \times 10^{23 }[/tex] molecules are in 0.25 mole of [tex]\rm CO[/tex]. The correct answer is option B.
A mole is defined as the amount of a substance that contains exactly [tex]\ \rm 6.022 \times 10^{23}[/tex] 'elementary entities' of the given substance.
To calculate the number of molecules in 0.25 mole of CO, we can use Avogadro's number, which is the number of particles (atoms, molecules, etc.) in one mole of a substance. Avogadro's number is approximately [tex]\ \rm 6.022 \times 10^{23}[/tex] particles per mole.
Number of molecules = Number of moles x Avogadro's number
Substituting the given values, we get:
Number of molecules = 0.25 mole x [tex]\ \rm 6.022 \times 10^{23}[/tex] molecules/mole
= [tex]\rm 1.5 \times 10^{23 }[/tex]
Therefore, the number of molecules in 0.25 mole of CO is approximately [tex]\rm 1.5 \times 10^{23 }[/tex] molecules. Option B is the correct answer.
Learn more about mole here:
https://brainly.com/question/30892840
#SPJ6
While massing a hazardous solid on the balance, a lab student finds the amount taken is larger than needed and removes a small portion with a spatula. What is the recommended strategy for dealing with the excess material
As with any laboratory work, adequate facility design, operation, and monitoring, as well as excellent work practices, are necessary to protect laboratory staff against the hazard.
Both degrees of protection are based on the principle of ALARA (as little as reasonably possible) exposure. Electricity Risks By adopting adequate measures, the electrocution dangers of electrically powered instruments, tools, and other equipment are nearly completely minimized, therefore their use in the hazard need not represent a serious risk. You need the correct sort of scales if you want to weigh laboratory samples accurately. To accurately weigh the lab samples, for instance, you may use an analytical balance. The reliability of the weighing device will determine how accurate and precise the findings are.
To learn more about laboratory please click on below link
https://brainly.com/question/14428286
#SPJ4
Why is energy released when intermolecular bonds form?
Answer:
Forming bonds requires energy
Explanation:
Creating a bond is bringing 2+ atoms into a more stable position.
Assume you expand the group of materials you have to test to include metals. The forces that hold the atoms together in a metallic solid, or piece of metal, are referred to collectively as the "electron sea. " This is because, in a metallic solid, electrons do not stay close to a single atom, rather they move through the metal quite readily. The resulting electrostatic force between the positive nuclei of the metal atoms and the negative electrons is very strong and keeps the metal in the solid state. Given this information, describe the results you would expect to observe if you performed the melting point and conductivity tests on a metal sample
If you perform a melting point test on a metal sample, you would expect to observe that the metal has a relatively high melting point compared to non-metallic materials. This is because of the strong electrostatic forces between the positive nuclei of the metal atoms and the negative electrons, which hold the metal atoms together in a tightly packed lattice structure. As a result, a large amount of energy is required to overcome these forces and melt the metal.
Metal samples are expected to be excellent conductors of heat and electricity when a conductivity test is performed on them. This is because electrons in metallic solids move through the metal fairly easily and are free to move around the lattice structure. This free movement of electrons allows heat and electricity to easily pass through the metal, making it highly conductive.
Learn more about the properties and behavior of metals here: https://brainly.com/question/5190495
#SPJ4