The point at which indicator undergoes colour change is called end point titration.True or False

The minimum amount of energy required to initiate a chemical reaction is known as the activation energy.

It is the amount of energy needed to break existing chemical bonds and create new ones, enabling the reaction to take place. The activation energy required for a reaction is dependent on the nature of the reacting species and the pathway taken for the reaction to occur. In most cases, the greater the activation energy required, the slower the reaction rate.

Activation energy can be provided in different ways, such as from thermal energy, from an electric spark, from light, or  the presence of a catalyst. Catalysts can speed up reactions by lowering the amount of activation energy required for the reaction to occur. Activation energy is also a key factor in controlling the rate of reactions since reactions can occur when the energy of the reactants reaches or exceeds the activation energy of the reaction.

Know more about activation energy here:

https://brainly.com/question/1380484

#SPJ11      

Among the given options, the weak electrolytes are NH₃ and CH₃OH.

NH₃ (ammonia) is a weak base, and when it dissolves in water, it produces ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), but only to a limited extent.

CH₃OH (methanol) is a polar molecule and can form hydrogen bonds with water, but it does not ionize or dissociate into ions when dissolved in water. Therefore, it is considered a weak electrolyte.

On the other hand, CaSO₄ (calcium sulfate) and AgCl (silver chloride) are both ionic compounds that dissociate into ions in water and conduct electricity well. Therefore, they are strong electrolytes.

In summary, NH₃ and CH₃OH are weak electrolytes, while CaSO₄ and AgCl are strong electrolytes.

To learn more about electrolytes refer to:

brainly.com/question/29771118

#SPJ4

Sulfur has a negative charge of 2 because it has gained two electrons to fulfill its octet rule.

Sulfur (S) has a negative charge of 2 because it has gained two electrons to fulfill its octet rule, which is a guideline in chemistry stating that atoms tend to gain, lose or share electrons to achieve a stable electron configuration of eight valence electrons (except for hydrogen and helium, which need only two electrons).

Sulfur is in Group 6 of the periodic table, which means it has six valence electrons. In order to fulfill the octet rule and achieve a stable electron configuration, it needs to gain two more electrons. When sulfur gains two electrons, it forms a stable S2- ion, which has a total of eight valence electrons.

The negative charge on the S2- ion arises because electrons are negatively charged particles. When sulfur gains two electrons, the total negative charge of the ion is increased by the charge of the two electrons, which is -2. Therefore, the S2- ion has a net charge of -2.

This makes sulfur an anion, which is a negatively charged ion. Anions are formed by gaining electrons, which leads to an excess of negative charge. In contrast, cations are positively charged ions, which are formed by losing electrons, resulting in an excess of positive charge.

More on sulfur can be found here: https://brainly.com/question/1478186

#SPJ1

Therefore, when 17.4 moles of HNO3 are consumed, 104.37 grams of water can be produced.

As there is sufficient oxygen available for the burning of the methane, there is no need for a limiting reagent in the reaction, which results in the production of carbon dioxide and water. Hence, the reaction results in the formation of 54 g of water.

Using the balanced chemical equation:

1 mole of HNO3 reacts to form 2 moles of H2O

So, 17.4 moles of HNO3 will produce:

2 moles of H2O x (17.4 moles HNO3 / 6 moles HNO3) = 5.8 moles of H2O

To calculate the grams of water produced, we need to use the molar mass of water:

Molar mass of H2O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol

So, 5.8 moles of H2O is equal to:

5.8 moles H2O x 18.015 g/mol = 104.37 g of H2O

To know more about moles visit:-

brainly.com/question/26416088

#SPJ1

A 665 mg tablet of Excedrin contains 250 mg of acetaminophen, 250 mg of aspirin, 65 mg of caffeine, and 100 mg of inactive ingredients. If we are working with 75 mg of powdered Excedrin, you will need to use ratios and proportions to calculate the amount of each compound present in a 75 mg sample of Excedrin.

To find out how much of each component is in 75 mg of Excedrin, we will use the ratio:

Let's do this for each of the compounds:

1. Acetaminophen: 665 mg: 250 mg = 75 mg: x

solve for x.

250 x 75 = 665 x

250 x 75 / 665 = x

Therefore, there are about 28.25 mg of acetaminophen in 75 mg of powdered Excedrin.

2. Aspirin: 665 mg: 250 mg = 75 mg: x

Solve for x.

250 x 75 = 665 x

250 x 75 / 665 = x

Therefore, there are about 28.25 mg of aspirin in 75 mg of powdered Excedrin.

3. Caffeine: 665 mg: 65 mg = 75 mg: x

solve for x. 65 x 75 = 665 x

x = 4875 / 665

Therefore, there are about 7.33 mg of caffeine in 75 mg of powdered Excedrin.

4. Inactive ingredients: 665 mg: 100 mg = 75 mg: x

solve for x.

100 x 75 = 665 xx = 7500 / 665

Therefore, about 11.28 mg of inactive ingredients are in 75 mg of powdered Excedrin.

#SPJ11

Learn more about ratios and proportions: What is the meaning of ratios and proportions? https://brainly.com/question/12024093

The Breadknife is made-up of  trachyte.

The rock formation is composed of volcanic rock known as trachyte. Trachyte is a type of igneous rock that is typically light in color, fine-grained, and contains large crystals of feldspar. The trachyte that makes up the Breadknife is believed to have formed about 17 million years ago during the Miocene Epoch, through the cooling and solidification of magma that rose to the surface.

The unique shape of the Breadknife is due to the erosion of the surrounding softer sedimentary rock, which has left the harder trachyte exposed as a narrow ridge with steep sides.

To learn more about solidification refer to:

brainly.com/question/392491

#SPJ4

When X, which contains both lactone and an acetal, is treated with the reagents NaOH, H2O, a neutral compound is formed. This product is known as a hemiacetal.

When an acetal is formed, a hemiacetal intermediate is produced. Hemiacetals, like acetals, are organic compounds. When the hemiacetal is treated with an alcohol, it forms an acetal. As a result, acetals are formed by a reaction that is similar to that of hemiacetals. Nucleophilic addition reaction is the reaction that occurs between a lactone and a hydroxide ion to create a lactone.

The reaction mechanism is nucleophilic addition followed by elimination. It is the same reaction mechanism as that of nucleophilic addition to a carbonyl group of a ketone or an aldehyde. Here is a neutral compound formed when X, containing both lactone and an acetal, is treated with NaOH and H2O:

OH– C4H9O – CHO2+ (lactone) ⟶  H3C–C(OH)–O– C4H9O– CHO + Na+ (counterion)

Thus, a hemiacetal is formed when X, which contains both lactone and acetal, is treated with NaOH and H2O.

To know more about hemiacetal, refer here:

https://brainly.com/question/28030326#

#SPJ11

If the shot was wet and included water at the same temperature as the shot, the extra water would increase the total heat capacity of the calorimeter and reduce the temperature change measured.

A calorimeter is a device used to measure the amount of heat energy released or absorbed in a chemical reaction. It is typically a closed container that consists of two compartments, one which holds the reactants and another which captures the heat released during the reaction. The heat energy absorbed or released is calculated by measuring the temperature change of the reactants and the calorimeter itself. Calorimeters are commonly used in chemistry labs to help students better understand the concepts of heat energy and chemical reactions.

This is because the extra water would absorb some of the heat released by the shot, reducing the amount of heat available to heat up the calorimeter and its contents. Therefore, the temperature change would be smaller than if the shot were dry.

To learn more about calorimeter

https://brainly.com/question/30873343

#SPJ1

As we travel down in the group, the halogens' boiling points rise. The resultant molecules may have a single carbon atom or as many as a million.

The attractive force grows as the number of electrons decreases in the group, and more energy is needed to counteract these forces, raising the boiling point.

Fluorine's boiling point of -188°C, Chlorine's of -34.6°C, Bromine's of 58.8°C, and iodine's of 184°C, as well as the trend in melting temperatures, are explained by the strengthening intermolecular interactions that bind the halogen molecules together.

To know more about halogens visit:-

brainly.com/question/11156152

#SPJ1

The movement of H+ ions across the membrane from the intermembrane space to the matrix causes synthase to spin and make ATP. The correct answer is Option C.

Adenosine triphosphate (ATP) is a type of organic molecule known as a nucleotide, which is important in metabolism and energy transfer within cells. ATP consists of a molecule of adenosine and a chain of three phosphate groups that are bound together by high-energy bonds. The chemical bond between the second and third phosphate groups of ATP is the highest energy bond in the molecule, and it stores energy that can be utilized in cellular reactions.

ATP synthase is an enzyme found in the inner mitochondrial membrane that catalyzes the formation of ATP from ADP and inorganic phosphate using energy from the electrochemical gradient established by the transport of H+ ions across the membrane. Therefore, the movement of H+ ions across the membrane from the intermembrane space to the matrix causes synthase to spin and make ATP.

Learn more about Adenosine triphosphate (ATP) here: https://brainly.com/question/897553

#SPJ11

the mass number of the mystery element is 14. The mass number of an atom is the total number of protons and neutrons in its nucleus.

The mass number of an atom is the sum of the number of protons and neutrons in its nucleus. This number represents the total number of particles (protons and neutrons) in the atom's nucleus.

In the case of the mystery element, it has 7 protons and 7 neutrons, which means its mass number is 14. The number of electrons in an atom is equal to the number of protons in its nucleus, which in this case is also 7.

The mass number is an important property of an atom as it determines the atom's atomic weight, which is the average weight of all the isotopes of an element. Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei, and therefore have different mass numbers. The atomic weight is calculated by taking the average of the mass numbers of all the isotopes of an element, weighted by their relative abundance.

Understanding the mass number is essential in many areas of science, including chemistry and nuclear physics, as it helps to describe the structure, stability, and behavior of atoms and their interactions with other atoms.

To know more about mass number, visit: brainly.com/question/4408975

#SPJ4

The pH at the equivalence point is approximately 2.78, when 50 ml of 0.2m pyridine ( kb - 1.7 × 10⁻⁹ is titrated with 0.2 m HCl ).

In chemistry, the equilibrium constant, denoted by K, is a quantitative measure of the extent to which a chemical reaction proceeds to completion. It is a constant value that characterizes the ratio of the concentrations of reactants and products at chemical equilibrium, which is the state at which the rates of the forward and reverse reactions are equal.

The equilibrium constant is defined as the product of the concentrations of the products raised to their stoichiometric coefficients, divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. Mathematically, this can be written as:

K = [tex](C^{c} D^{d} ) / (A^{a} B^{b} )[/tex]

where A, B, C, and D are the chemical species involved in the reaction, and a, b, c, and d are their respective stoichiometric coefficients.

The titration of pyridine (C₅H₅N) with hydrochloric acid (HCl) is a type of acid-base titration. At the equivalence point, all of the pyridine has reacted with the HCl to form pyridinium chloride (C₅H₅NHCl) and the pH of the solution is determined by the salt formed.

The chemical equation for the reaction between pyridine and HCl is:

C₅H₅N + HCl → C₅H₅NHCl

At the equivalence point, the moles of HCl added are equal to the moles of pyridine initially present.

Initial moles of pyridine = (0.2 mol/L) x (0.050 L) = 0.01 moles

At the equivalence point, 0.01 moles of HCl will have been added.

The reaction between pyridine and HCl is a basic reaction since pyridine is a weak base and HCl is a strong acid. The pyridine accepts a proton (H⁺) from the HCl to form the conjugate acid, pyridinium ion (C₅H₅NH⁺). The pyridinium ion is a weak acid that undergoes hydrolysis to form hydronium ion (H₃O+) and pyridine:

C₅H₅NH⁺  + H₂O ⇌ C₅H₅N + H₃O⁺

The equilibrium constant for this reaction, Kb, is related to the equilibrium constant for the hydrolysis reaction, Kw, as follows:

Kb x Kw = Kw

Kb = Kw / Kw = 1.0 x 10⁻¹⁴ / 1.7 x 10⁻⁹= 5.88 x 10⁻⁶

At the equivalence point, the concentration of pyridine and pyridinium ion are equal, and the pH can be calculated using the Kb expression:

Kb = [C₅H₅N][H₃O⁺] / [C₅H₅NH⁺]

Since [C₅H₅N] = [C₅H₅NH⁺] = 0.01 moles / 0.050 L = 0.2 M at the equivalence point, we can simplify the expression to:

Kb = [H₃O⁺]² / 0.2

[H₃O⁺]² = Kb x 0.2

[H₃O⁺] = √(Kb x 0.2) = √(5.88 x 10⁻⁶ x 0.2) = 1.67 x 10⁻³ M

pH = -log[H₃O⁺] = -log(1.67 x 10⁻³) = 2.78

To know more about equilibrium constant, visit:

https://brainly.com/question/10038290

#SPJ1

The solubility criteria for typical ionic chemicals in order to decide which combination would not precipitate in an aqueous solution. The correct option is  E) All of the combinations will form precipitates, as all of the provided combinations would result in precipitates.

A) Sr(NO₃)₂ and NaOH: In accordance with the solubility requirements, all Group 1 metal hydroxides (OH-), including NaOH, are soluble with the exception of LiOH. Sr(NO₃)₂ and NaOH would therefore precipitate.

B) AgNO₃ and KBr: Silver chloride (AgCl), silver bromide (AgBr), and silver iodide (AgI) are insoluble according to the solubility laws. AgNO₃ and KBr would therefore precipitate.

C) Sulfides (S2-) of Group 2 metals, such as ZnS, are insoluble, according to the solubility criteria. This includes Zn(C2H₃O₂)₂ and Na₂S. Acetates (C₂H₃O₂), on the other hand, are often soluble. Zn(C₂H₃O₂)₂ and Na₂S would therefore precipitate.

D) Pb(NO₃)₂ and Na₂SO₄: Sulfates (SO₄-) are typically soluble, with a few outliers like BaSO₄, PbSO₄, and SrSO₄, according to the solubility criteria. Pb(NO₃)₂ and Na₂SO₄ would therefore precipitate.

The correct response is: as all of the provided combinations would result in precipitates.

E) All of the combinations will form precipitates.

To know more about solubility:

https://brainly.com/question/31493083

#SPJ12

A solution that has more solute than the saturated solution at a given temperature is known as a supersaturated solution.

A supersaturated solution is a solution that contains a higher concentration of solute than the saturation level at a given temperature. At the saturation point, no more solute can dissolve into the solvent. In such a case, the solvent is said to be saturated. The process of preparing a supersaturated solution is by dissolving a larger amount of solute than the solvent can dissolve at a particular temperature. The excess solute is not completely soluble at lower temperatures but dissolves when the temperature increases or a seed crystal is added.

In other words, the solubility of the solute in the solvent increases with temperature. Supersaturated solutions are highly unstable as they contain a higher amount of solute than what the solvent can dissolve. A supersaturated solution is in a metastable state. In a metastable state, the excess solute will remain in solution until some stimulus, such as adding a seed crystal, causes the solute to precipitate.

Learn more about supersaturated solution here: https://brainly.com/question/2800726

#SPJ11

The reactions between bases and acids don't happen. Electrolytes are substances that dissolve in water (or another polar solvent) to form an electrically conducting solution.

Because they can move, ions can ionise in solutions. Because conductivity in water is caused by electricity moving back and forth between ions, it increases as salt (Na+) or chlorine (Cl-) combine to form table salt in saltwater.

A substance can function as both a Brnsted base and an acid. The table above has entries for H2O, OH, HSO4, and NH3 in both columns, for instance. Water serves as the ideal illustration of this behaviour because, when it creates the H3O+ or OH- ions, it functions both as an acid as well as a base.

To know more about Electrolytes visit:

https://brainly.com/question/29771118

#SPJ1

Answer: 6.2 NA

Explanation:

the given statement is true. The construction of B12 depends on a corrin ring, which is like the porphyrin ring tracked down in heme. The focal metal particle is cobalt.

As secluded as an air-stable strong and accessible monetarily, cobalt in vitamin B12 (cyanocobalamin and other vitamers) is available in its +3 oxidation state.

Cyanocobalamin is a cobalt-containing coordination compound produced by digestive organisms and a characteristic water-solvent nutrient of the B-complex family that should consolidate with Inborn Elements for retention by the digestive system. Cyanocobalamin is important for hematopoiesis, neural metabolism, DNA and RNA creation, and starch, fat, and protein metabolism. B12 works on iron capabilities in the metabolic cycle and helps folic corrosive in choline union. B12 metabolism is interconnected with that of folic corrosive. Lack of vitamin B12 causes noxious iron deficiency, megaloblastic weakness, and neurologic injuries.

to know more about Vitamin B12 click here:

https://brainly.com/question/22468338

#SPJ4

By the use of the principles of stoichiometry of the reaction, the number of moles of NO is 4.75 moles

Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves using balanced chemical equations to calculate the amounts of reactants needed and the amounts of products produced in a reaction.

We know that;

8 moles of HNO3 produces 2 moles of NO

19 moles of HNO3 can make x moles of NO

x = 19 * 2/8

x = 4.75 moles

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

Because the electrons are switching between one side of the cell and the other, to maintain charge balance.

The correct option is C.

The salt bridge is frequently an upside-down glass U-shaped tube filled with table salt in empirical settings. In order to create an electrochemical cell, its two legs dip into two different electrolyte vessels (the half-cells).

The salt bridge's job is to maintain the solutions' electrical neutrality while allowing unrestricted ion passage across cells. The absence of the salt bridge will result in a buildup of both positive and negative charges surrounding the electrodes, which will stop the reaction.

To know more about Salt-Bridge visit:

https://brainly.com/question/9962244

#SPJ1

The complete question is -

What is the main purpose of a salt bridge?

A-To maintain solution volume to allow higher concentration solution

B-To migrate to lower concentration solution.

C-To maintain charge balance because the electrons are moving from one-half cell to the other.

D-To allow exchange of metal cations only

No the major product does not depend on whether we start with the r or s enantiomer of the reactant.

Generally, a stereospecific reaction is defined as the reaction in which different stereoisomers react to give different stereoisomers of the product. Lets consider an example, if the substrate is an R enantiomer, a frontside nucleophilic attack results in retention of configuration, and the formation of the R enantiomer.

Basically a counterclockwise or anticlockwise direction is an S (sinister, In Latin for left) configuration and a clockwise direction is an R (rectus, In Latin for right) configuration. R or S of the enantiomer usually don't apply any impact on the major product formed.

Learn more about stereochemistry from the link given below.

https://brainly.com/question/28658912

#SPJ4

If a company like Apple were to learn about an environmental mining disaster at a copper mine from which they acquire materials, they should respond by taking immediate action to address the situation.

Firstly, the company should investigate the impact of the disaster on the local environment and the communities living in the area. They should work with independent experts and local stakeholders to understand the extent of the damage and the potential long-term consequences. This information will be crucial in determining the appropriate response.

Secondly, the company should review their supply chain and identify any potential risks or issues related to the mining operations. They should engage with their suppliers and work together to address the situation and ensure that responsible mining practices are being followed.

Learn more about environmental impact:https://brainly.com/question/29638468

#SPJ1

One Arrhenius acid ( CH₃OH ) and one Arrhenius base (NaOH) are represented by this combination. (NaOH).

The Arrhenius theory defines an acid as a substance that produces H⁺ ions when dissolved in water, and a base as a substance that produces OH⁻ ions when dissolved in water. Therefore, in the given options, NaOH represents an Arrhenius base because it dissociates in water to form OH⁻ ions.

Among the given options, the pair representing one Arrhenius acid and one Arrhenius base is CH₃OH and NaOH. Methanol (CH₃OH) does not contain H⁺ ions in its molecular structure, and it does not ionize in water to produce H⁺ ions. On the other hand, NaOH dissociates in water to form OH⁻ ions, indicating that NaOH is an Arrhenius base.

Therefore, the pair CH₃OH and NaOH represents one Arrhenius acid (CH₃OH) and one Arrhenius base (NaOH).

To learn more about  arrhenius acid refer to:

brainly.com/question/9936252

#SPJ4

The pair of compounds that represents one Arrhenius acid and one Arrhenius base is CH3OH and NaOH. CH3OH, also known as methanol, is a weak Arrhenius acid because it can donate a proton (H+) in solution.

NaOH, also known as sodium hydroxide, is a strong Arrhenius base because it can accept a proton (H+) in solution. When these two compounds are mixed in a solution, they will undergo a neutralization reaction, where the methanol will donate a proton to the hydroxide ion from NaOH to form water (H2O). The resulting solution will be basic due to the excess hydroxide ions from NaOH.

To learn more about Arrhenius acid visit;

https://brainly.com/question/518989

#SPJ4

The compound [18F]2-fluoro-2-deoxyglucose is an imaging agent used to detect tumors.

[18F]2-fluoro-2-deoxyglucose is a radiolabeled glucose analogue that is used in positron emission tomography (PET) imaging. The compound is taken up by cells in the body and accumulates in tissues with high glucose metabolism, such as tumors.

The radiolabeled fluorine-18 emits positrons, which interact with electrons in the body to produce gamma rays that can be detected by a PET scanner. The signal from the gamma rays is then used to produce images of the tissues that have taken up the compound.

The use of [18F]2-fluoro-2-deoxyglucose in PET imaging has become an important tool for the detection and staging of tumors, as well as for monitoring the response to treatment. It is particularly useful for imaging tumors that are difficult to detect with other imaging techniques, such as small or metastatic tumors.

To know more about detect tumors, refer here:

https://brainly.com/question/14584081#

#SPJ11

Answer: C. Nuclear fusion begins when a large, unstable nucleus is bombarded with a smaller particle.

Explanation:  While this statement provides some information about nuclear fusion, it does not offer additional details or insights into the process.  It simply describes the initial stage of nuclear fusion, where a large, unstable nucleus is bombarded with a smaller particle.  This statement does not provide further information about the energy produced or the applications of nuclear fusion.

Learn more about nuclear fusion here: https://brainly.com/question/14019172.

By acting as a competitive inhibitor of the enzyme dihydropteroate synthase (DHPS), which is involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.

By acting as a competitive inhibitor of dihydropteroate synthase (DHPS), an enzyme involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.

Sulfanilamide inhibits DHPS activity and stops bacteria from generating folic acid by attaching to the enzyme's active site and blocking the substrate from binding. Sulfanilamide has a bacteriostatic action as a result of this, which prevents bacteria that depend on folic acid for living from growing and replicating.

learn more about folic acid here

https://brainly.com/question/4372756

#SPJ1

The statement that tungsten-halogen lamps operate at very high temperatures (high enough to literally fry eggs) and should not be used in fixtures that have paper- or cellulose-lined sockets is TRUE.

A tungsten halogen lamp is a type of incandescent lamp that contains a small amount of halogen gas such as iodine or bromine inside the bulb, which reacts with the tungsten filament when the bulb is turned on. Tungsten halogen lamps are widely used in stage lighting, film projection, automobile headlights, and other applications that require high-intensity lighting.

They generate a lot of heat when in operation, reaching temperatures high enough to cook an egg. The high operating temperature of tungsten halogen lamps can melt paper or cellulose-lined sockets, posing a potential fire hazard.

Tungsten halogen lamps should not be used in fixtures with paper- or cellulose-lined sockets because the heat generated by the lamp can melt the lining and cause the fixture to catch fire. Instead, fixtures that use tungsten halogen lamps should be designed to withstand the high temperatures they generate.

To know more about tungsten-halogen lamps, refer here:

https://brainly.com/question/2625320#

#SPJ11

The specific heat of the metal is 21,695.047 J/g/deg

The water will develop heat as a result of heat being transmitted from the hot metal to the colder water. The metal and the water will both be the same temperature (56C) at the conclusion.

The heat (q) is determined by multiplying the mass (m) by the specific heat (C) and the temperature change (ΔT).

q = mC∆T

For the metal: q = (2.34kg) (C J/g/deg) (129deg - 88deg)

                        q = 301.86- 205.92

                        q = 95.94 C

For the water: q = (15,546g) (4.184 J/g/deg) (88 deg - 56 deg) 

= 65,044.464*88 - 65,044.464*56

= 2081422.848 J

95.94 C = 2081422.848

C = 2081422.848/95.94 = 21,695.047

C = 21,695.047 J/g/deg --> specific heat of the metal

Learn more about heat here:

https://brainly.com/question/23177729

#SPJ4