While not being particularly fertile, the Pontotoc Ridge region, which borders Alabama, is renowned for its fertile soil, which is great for growing cotton.
In what kind of soil is the Pontotoc Ridge located?The red clays and sands of Lafayette are a major source of the soils in Pontotoc Ridge. There are also a few isolated pockets of residual soils from the Ripley, and it's possible that the Lafayette is made up at least in part of materials from the Ripley.
What crop reduced the soil's fertility in the Pontotoc region?From the southern boundary to Starkville, the Pontotoc flows. Sand and clay make up the soil. Here, maize was grown by early white immigrants and Native Indians. Corn's healthy soil was harmed when cotton took its place as a crop.
To know more about soil visit:-
https://brainly.com/question/4151485
#SPJ9
if the weather forecaster indicates that a frontal system is approaching your area with a strong squall line, what type of frontal system is headed your way?
If the weather forecaster indicates that a frontal system is approaching your area with a strong squall line, then the type of frontal system that is headed your way is a cold front.
What is a cold front?
A cold front is defined as the boundary between two air masses that have different temperatures, densities, and humidities. The cold front's leading edge, which is a front of cold air, pushes underneath the warmer air ahead of it.
The more gradual lifting of warm air leads to the development of a weather system, which can be accompanied by cumulus clouds, thunderstorms, and squalls. The squall line is a strong outflow boundary of cold air produced by the front's faster movement.
To know more about cold front refer here:
https://brainly.com/question/21551311
#SPJ11
the richter magnitude of an earthquake is determined from the .group of answer choicesintensity of the earthquakearrival time of p and s wavesarrival time of p and surface wavesduration of the earthquake
The Richter magnitude of an earthquake is determined from the arrival time of P and S waves. Therefore the correct option is option B.
The Richter magnitude scale is a measure of an earthquake's size that assigns a single number to the amount of seismic energy released. Earthquakes are classified according to their magnitude, and the Richter magnitude scale is one of several scales used to do so. The Richter scale was developed by Charles F.
Richter, an American seismologist. The Richter scale, which ranges from 1 to 10, is a logarithmic scale.
Therefore, each whole number increase in magnitude represents a tenfold increase in seismic energy. To summarize, the Richter magnitude of an earthquake is determined from the arrival time of P and S waves.
For such more question on magnitude:
https://brainly.com/question/28671649
#SPJ11
The following question may be like this:
The Richter magnitude of an earthquake is determined from the .group of answer choices
intensity of the earthquakearrival time of p and s wavesarrival time of p and surface wavesduration of the earthquakeYou must sail from West to East to find a city near a Western shore, between fields of gold and silver.
Based on the given information, you may be looking for the city of Cádiz, located in southwestern Spain. Cádiz is a coastal city that sits on the Atlantic Ocean, making it near a Western shore.
What is shore?Shore is a landform that is located between land and water. It can be a beach, a line of rocks, or a combination of both. The shoreline is the boundary between dry land and the sea, lake, or river. It is often an area of great beauty and an important habitat for wildlife. Shorelines are also home to many human activities such as fishing, swimming, boating, and surfing. Many urban areas are located close to the shoreline, making it a popular recreational area. Shorelines also provide a barrier to storm surges and flooding, helping to protect people and property from the damaging effects of floods. Shorelines are also a critical source of sand, gravel, and other materials that are important for construction projects. Shorelines are constantly changing, due to the action of waves, tides, and storms, as well as human activities such as dredging, land reclamation, and coastal engineering. Shorelines must be carefully managed to ensure their ecological health and the safety of people.
To learn more about Cádiz visit:
https://brainly.com/question/24079021
#SPJ1
Complete Question is: Name the city based on the statement. You must sail from West to East to find a city near a Western shore, between fields of gold and silver
What evidence of low rainfall is shown on topographic map in geography grade 12
Answer:
when the map is blue
Explanation:
Contours make it possible to show the height and shape of mountains, the depths of the ocean bottom, and the steepness of slopes. USGS topographic maps also show many other kinds of geographic features including roads, railroads, rivers, streams, lakes, boundaries, place or feature names, mountains, and much more.
a major driving mechanism of the moc is the sinking of water in the north atlantic. this begins with the formation of . as ocean water freezes, ice crystals exclude salt and the salinity of the surrounding water increases.
The major driving mechanism of the MOC (Meridional Overturning Circulation) is the sinking of water in the North Atlantic.
This begins with the formation of sea ice. As ocean water freezes, ice crystals form and the salt that is excluded from the crystals increases the salinity of the surrounding water, which causes it to become denser and sink.
Meridional Overturning Circulation (MOC) is a north-south (meridional) overturning circulation in the sea calculated by zonal accumulation (east-west) of the amount of water mass transport in depth or density layers.
This somersault circulation occurs in the North Atlantic, away from the subpolar regions, the MOC (which is in principle an observable quantity) is often identified with the thermohaline (THC) circulation, which is more of a conceptual interpretation.
Learn more about MOC : https://brainly.com/question/28908672
#SPJ11
_______________ form when more resistant rock does not erode and less resistant rock on each side does.
Rock Formation form when more resistant rock does not erode and less resistant rock on each side does.
What is a Rock Formation?Rock formations are the result of a geological process that causes rock to break, crack, erode, and form new structures. Rocks are constantly being formed, eroded, and recycled through the rock cycle, but some rocks are more resistant to erosion than others. The more resistant rocks, such as granite, sandstone, or limestone, can resist erosion and weathering, while less resistant rocks, such as shale, clay, or sand, erode more easily. This results in the formation of various landforms, including buttes, mesas, spires, arches, and cliffs.
Rock formations can take millions of years to form and are shaped by a combination of geological processes such as tectonic activity, erosion, weathering, and deposition. They can be found all over the world and provide valuable information about the earth's history and geology.
Learn more about Rock formations here: https://brainly.com/question/19217766
#SPJ11
wildfires may spread in three ways: slowly along the ground, as a wall of fire along a flaming combustion front, or as a(n
Wildfires may spread in three ways slowly along the ground, as a wall of fire along a flaming combustion front, or as a crown fire.
A wildfire is an uncontrollable fire that burns in the wilderness. It is sometimes referred to as a forest fire, bushfire, or grass fire because it typically happens in wooded areas, grasslands, and shrublands. Three ways in which wildfires can spread are mentioned below:Slowly along the ground:
The fire creeps slowly along the ground, burning up dead leaves, branches, and twigs. It is the slowest mode of propagation, with an average speed of 0.5 mph.Wall of fire: When a combustible substance is ignited, the fire spreads in the form of a wall of flames. When a fuel source is present, the fire spreads faster and with greater intensity.
Crown fire: It occurs when the flames reach the treetops. It may be caused by windborne embers, spotting, or surface fire that progresses upward. Crown fires can spread rapidly, spreading embers over a considerable distance.
To know more about flaming combustion refer here
https://brainly.com/question/14177748#
#SPJ11
ANSWER ASAP!!!!!
Which of the following East Asian nations lack major deposits of oil or coal? (choose all that apply)
- Japan
- China
- North Korea
- Taiwan
Answer:
Taiwan
Explanation:
All of the others have money and resources!
Hope this helps!
It lacks resources Taiwan!
2. What is one of the characteristics of Mexico's heartland region?
the country's longest coastline
the country's best farmland
the country's largest oil deposits
the country's driest weather
(ANSWER QUICK PLEASE)
the country's best farmland
which factor will increase the salt concentration in seawater? responses precipitation precipitation evaporation evaporation runoff runoff ice cap melting
Evaporation is the factor that will increase the salt concentration in seawater.
Seawater is primarily made up of water and dissolved salts. Salts come from the weathering of rocks on land and volcanic activity on the seafloor.
When seawater evaporates, the water is removed, but the salts remain, resulting in an increase in salt concentration.
The salt concentration in seawater is measured in parts per thousand (ppt) or salinity, and it varies depending on where you are in the world. Salinity levels can range from 32 to 37 ppt.
The salinity of seawater also varies depending on the temperature, pressure, and amount of dissolved gases in the water.
Seawater is denser than freshwater because of its high salt content.
Because saltwater is denser than freshwater, it tends to sink beneath it, which causes ocean currents.
To know more about Evaporation, refer here:
https://brainly.com/question/320765
#SPJ11
Answer: THE ANSWER IS D) Evaporation
Explanation: I GOT A 100 ON THE 3 QUESTION QUIZ
describe the different kinds of energy that impact earth from the outside and what effects they have on our planet.
The Earth is constantly being impacted by a variety of forms of energy from outside sources. These can be broadly divided into three categories: solar energy, cosmic energy, and geothermal energy.
To know more about forms of energy refer here:
https://brainly.com/question/29471089#
#SPJ11
which of the following glacial features is indicative of the local climate becoming dry and cold? group of answer choices boulder trains. striation. drumlins. loess.
The glacial feature that is indicative of a local climate becoming dry and cold is loess.
Loess is an unconsolidated, silty sediment deposited by the wind, typically found in arid or semi-arid climates. It is usually found on the leeward side of mountains and hills, and is often found in association with glacial deposits.
This process is often found in regions of glacial feature, such as mountain ranges and hillsides. The sediment accumulates in layers of silt, which eventually hardens and forms loess.
Learn more about climate: https://brainly.com/question/17922964
#SPJ11
q2: how much higher has the average temperature during the peak of the interglacial period been compared to the average temperature during the last glacial maximum?
The average temperature during the peak of the interglacial period has been about 5-6 degrees Celsius higher than the average temperature during the last glacial maximum.
An interglacial is a geological epoch during which Earth's climate was warmer than it is today, typically lasting thousands of years. Interglacials are usually characterized by high temperatures, which lead to the melting of ice caps and rising sea levels.
During the last glacial maximum, which lasted from about 26,000 to 19,000 years ago, Earth's temperature was about 5-6 degrees Celsius lower than it is today. This means that during the peak of the interglacial period, the average temperature was about 5-6 degrees Celsius higher than the temperature during the last glacial maximum.
know more about interglacial period here
https://brainly.com/question/27755924#
#SPJ11
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the __________ effect.
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.
As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.
What is the Greenhouse Effect?The Greenhouse Effect refers to the process by which the earth's atmosphere traps the heat from the sun and keeps it from being lost to space. The gases that create this effect are called "greenhouse gases," and they include water vapor, carbon dioxide, methane, nitrous oxide, and ozone. While some of these gases are produced naturally, others are human-made. There are many factors that can affect the level of greenhouse gases in the atmosphere, including industrialization, deforestation, and population growth.
As greenhouse gases accumulate in the atmosphere, they can trap more and more heat, leading to a phenomenon known as "global warming." This can have far-reaching effects on the planet, including rising sea levels, increased frequency and severity of storms, and changes in precipitation patterns.
Learn more about Greenhouse Effect here: https://brainly.com/question/19521661
#SPJ11
describe the stages leading to formation of a detrital sedimentary rock: e.g. weathering, erosion, transportation, deposition, compaction, and lithification. at what stage does compaction and lithification occur?
The stages leading to the formation of a detrital sedimentary rock are weathering, erosion, transportation, deposition, compaction, and lithification. Compaction and lithification occur in the final stages of detrital sedimentary rock formation.
Detrital Sedimentary Rocks (also known as clastic sedimentary rocks) are created by the accumulation of rock and mineral fragments that have been weathered from pre-existing rocks, transported by wind, water, or ice, and then cemented together by mineral cement that precipitates from groundwater.
The Stages Leading to the Formation of a Detrital Sedimentary
Rock Weathering The first stage in the development of a detrital sedimentary rock is weathering. Weathering is the decomposition of rocks that occurs as a result of physical, chemical, or biological processes.
Erosion The second step is erosion, which occurs as a result of the transport of weathered rock particles by wind, water, or ice.
Transportation The third step is transportation. The movement of weathered rock particles by water, wind, or ice to a site where deposition can occur.
Deposition The fourth step is deposition, where weathered rock particles are deposited in layers by water, wind, or ice in a specific location.
For such more question on sedimentary:
https://brainly.com/question/31060487
#SPJ11
which mining process uses heavy equipment to dig holes to remove ores, as well as sand, gravel, and stone? dredging heap leaching open-pit mining strip mining
The strip mining process uses heavy equipment to dig holes to remove ores, as well as sand, gravel, and stone. The correct option is d.
Strip mining is a process that uses heavy equipment to remove ores, sand, gravel, and stone from the earth. It involves digging a large trench and removing the material layer by layer, until the desired material is exposed. The correct option is d.
The material is then hauled away and processed. Strip mining is often used to mine coal and tar sands, and is used when the material is too deep to access by open-pit mining.
To learn more about strip mining here:
https://brainly.com/question/5367423#
#SPJ11
explosive volcanoes tend to occur at which type of plate boundary?
Explosive volcanoes tend to occur at convergent plate boundaries.
Volcanoes that erupt explosively are known as explosive volcanoes.
These volcanoes eject ash, gas, and rocks high into the air during their eruptions, resulting in the formation of pyroclastic flows, which are dense collections of hot ash, rock fragments, and gas that flow down the slopes of the volcano.
A boundary where two tectonic plates come together and interact is known as a convergent plate boundary.
Convergent plate boundaries are characterized by the fact that one plate is typically forced beneath the other as they collide, resulting in the formation of a subduction zone.
Explosive volcanoes tend to occur at convergent plate boundaries. At convergent plate boundaries, two plates come together, and one is forced beneath the other.
When the lower plate sinks into the hot mantle, it causes melting, and this molten rock rises to the surface, forming a volcano.
The most explosive volcanoes are those that occur at subduction zones because the magma that rises to the surface is rich in water and other volatile elements, making it more explosive when it reaches the surface.
Some examples of explosive volcanoes include Mount St. Helens in the United States, Mount Fuji in Japan, and Mount Pinatubo in the Philippines.
To know more about convergent plate, refer here:
https://brainly.com/question/23845744#
#SPJ11
In india, they are actually not part of the caste system, outsiders known as * 7 points
Dalits?
servants
O untouchables
slaves
unseeables
In India, the people who are actually not part of the caste system and are known as outsiders are the B. Untouchables.
Who are India's Untouchables ?This group of people in India are called Dalits. They were historically referred to as "untouchables" because they were considered outside of the traditional caste system, which was and still is a significant social hierarchy in India. However, the term "untouchables" is now considered derogatory and is not used officially.
Dalits are often subjected to social and economic discrimination, and they have historically been relegated to menial and low-status jobs such as manual scavenging and sanitation work.
Find out more on untouchables at https://brainly.com/question/17102921
#SPJ1
Which past European leaders have had a positive impact/influence and which have had a negative impact/influence on the economic, social, and political development of Europe? List at least four leaders, and give details and explain your reasons for selecting them.
HELPPPP MEEE PLEASEEEEEEE :(
Answer:
Positive Impact:
Angela Merkel - She served as the Chancellor of Germany from 2005 to 2021 and played a critical role in stabilizing the Eurozone during the 2008 financial crisis. She also advocated for measures to combat climate change and supported the integration of refugees into German society.
Winston Churchill - He was the Prime Minister of the United Kingdom during World War II and is widely credited with leading the country to victory against Nazi Germany. He also played a key role in shaping the post-war political landscape of Europe and promoting European unity.
Jean Monnet - He was a French diplomat and a key architect of the European Union. He is credited with developing the idea of a common market and a shared currency for Europe, which has facilitated trade and economic growth across the continent.
Willy Brandt - He served as the Chancellor of West Germany from 1969 to 1974 and pursued a policy of détente with the Soviet Union and the Eastern Bloc. He also advocated for social reforms and was instrumental in improving relations between Germany and its neighbours in Eastern Europe.
Negative Impact:
Adolf Hitler - He was the leader of Nazi Germany and was responsible for starting World War II, which resulted in the deaths of millions of people. His policies of racial purity and persecution of Jews and other minorities led to genocide and the Holocaust.
Joseph Stalin - He was the leader of the Soviet Union and responsible for the deaths of millions of people through forced labour camps, purges, and famines. His policies also led to the suppression of individual freedoms and the violation of human rights.
Benito Mussolini - He was the leader of Fascist Italy and an ally of Nazi Germany during World War II. His policies of nationalism and authoritarianism led to the suppression of political opposition and the violation of human rights.
Margaret Thatcher - She was the Prime Minister of the United Kingdom from 1979 to 1990 and pursued a policy of neoliberalism that led to the privatization of public services and the weakening of labor unions. Her policies also contributed to rising income inequality and social unrest in the UK
soil with approximately equal amounts of sand, silt, and clay along with a generous amount of organic matter is called loam. inorganic. humus. caliche.
Loam is the soil with approximately equal amounts of sand, silt, and clay along with a generous amount of organic matter.
What is Loam soil?Loam soil is a type of soil that is made up of sand, silt, and clay in roughly equal parts. Loam soil contains more organic matter than any other soil type, making it ideal for growing plants. This soil type has the advantage of having a well-draining texture that is easy to work with, which is ideal for root development. Loam soil has a pH of 6.0 to 7.0 and is usually rich in nutrients such as nitrogen, potassium, and phosphorus.
Hence the correct answer is loam.
To know more about Loam refer here:
https://brainly.com/question/17146975
#SPJ11
would you expect as many impact craters per unit area on the surface of venus as on the surface of mars? why or why not?
The answer to this question is no, we would not expect as many impact craters per unit area on the surface of Venus as on the surface of Mars. The reason for this is because Venus has a much thicker atmosphere than Mars, which acts as a shield that protects the surface of the planet from incoming objects.
Additionally, Venus has a much stronger gravity than Mars, which pulls objects that enter the atmosphere back towards the planet rather than letting them reach the surface. This further reduces the amount of impact craters on the surface of Venus.
In comparison, Mars has a much thinner atmosphere, which does not provide as much protection from incoming objects. The weaker gravity also means that objects that enter the atmosphere have a much better chance of reaching the surface of the planet. This contributes to more impact craters forming on the surface of Mars.
Know more about impact craters here:
https://brainly.com/question/14697865
#SPJ11
The process of the ice falling into the ocean is called glacial __________.
The process of the ice falling into the ocean is called glacial calving.
What is Glacial Calving?Glacial calving is the breaking off of a chunk of ice from a glacier or ice shelf, often resulting in a piece of ice that is so large it is referred to as an iceberg. When ice detaches from a glacier, ice shelf, or ice front, this process occurs. Calving might be the result of melting or some other form of ice instability, but it is most commonly caused by a collision with water. Calving can happen when ice sheets flow into the ocean, as is the case with the Greenland ice sheet. When glaciers reach the sea, their weight makes them flow out over the water, forming an ice shelf. Waves can then eat away at the ice shelf, leading to chunks of ice being broken off by the motion of the water below.
Learn more about glacier here: https://brainly.com/question/6666513
#SPJ11
How does the thickness of the troposphere compare with the thickness of the atmosphere as a whole
Answer:
The thickness of each layer in terms of the troposphere's thickness is 1.75 for the stratosphere, 1.75 for the mesosphere, and 20.6 for the thermosphere.
18. true or false:
ocean tidal bulges are actually waves with extremely long wavelengths.
19. true or false.
the sun’s gravitational pull can actually reduce the height of a high tide.
state one similarity and one difference in life expectancy in developed and developing countries
One similarity in life expectancy between developed and developing countries is that people tend to live longer in both types of countries compared to historical periods.
One difference in life expectancy between developed and developing countries is that there is often a significant gap in life expectancy between the two.
How do developed and developing countries compare in life expectancy ?Developed countries generally have higher life expectancies than developing countries due to factors such as greater access to healthcare, higher standards of living, and better infrastructure. In some cases, this gap can be quite large, with people in developed countries living many years longer on average than people in developing countries.
However, it is worth noting that the gap in life expectancy between developed and developing countries has been decreasing over time as developing countries continue to make progress in improving healthcare and other factors that contribute to longer lifespans.
Find out more on life expectancy at https://brainly.com/question/29620958
#SPJ1
the giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of, is:
The giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of, is Uranus.
Uranus is the giant planet that has an axis that points roughly straight up, and thus has no seasons to speak of. Uranus is the seventh planet from the Sun, and it was the first to be discovered by means of a telescope. It's also the third-largest planet in terms of diameter, and it's the fourth-most massive.
Uranus is also distinctive in that it is the only planet in the solar system that has an axis that is nearly perpendicular to the plane of its orbit. In addition, Uranus is primarily composed of hydrogen, helium, and methane, which accounts for its pale blue color. Uranus' atmosphere contains bands of clouds that are made up of methane crystals. The planet also has an extensive system of rings and a multitude of moons orbiting it.
know more about planet here
https://brainly.com/question/14581221#
#SPJ11
an area that drains to a common waterway is called: a. urban runoff b. deforestation c. watershed d. ozone
An area that drains to a common waterway is called a watershed. The correct option is option C.
What is a watershed?A watershed is a location in which rain, snow, and other precipitation fall and drain into a common waterway, such as a river, lake, or ocean. The waterway, which transports water to the location, is the end of the watershed. A watershed, also known as a drainage basin, refers to the area of land that drains into a particular river system or other waterbody.
It may be a small, concentrated drainage basin, such as a small lake or wetland, or a large region with many rivers and tributaries. All water that falls inside the watershed's boundaries eventually makes its way to the river or other body of water.
What is Urban Runoff?Urban runoff is the discharge of precipitation and other pollutants from developed regions such as towns and cities. Urban runoff carries contaminants from roads, buildings, and other impervious surfaces, resulting in higher levels of pollution in the water.
As a result, it has the potential to cause significant ecological damage and has been linked to a variety of public health concerns.
To know more about watershed refer here
https://brainly.com/question/13313239#
#SPJ11
what are the reasons that this rock possesses neither a glassy texture nor a vesicular texture? select the three that apply.
The reasons that this rock possesses neither a glassy texture nor a vesicular texture are This rock does not have a glassy luster.This rock does not contain any visible holes.This rock does not possess a conchoidal fracture.
The term "vesicular texture" is used to describe volcanic rocks with holes called "vesicles" that were created by gas bubbles in the lava. The name of this igneous rock is scoria. When gas bubbles in the cooling lava escape, they form the vesicles.
Glassy textures are mostly found in volcanic rocks because they indicate a relatively rapid cooling of magma. Crystals don't have much time to grow when magma cools quickly, so they stay very small and keep the rock smooth.
Disclaimer The question is incomplete.
what are the reasons that this rock possesses neither a glassy texture nor a vesicular texture? select the three that apply.
This rock does not have a glassy luster. This rock does not contain any visible holes. This rock does not possess a conchoidal fracture.Vesicular rocks have small holes, or pores.To know more about glassy texture click below:
https://brainly.com/question/28538811
#SPJ4
which of the following problems is directly associated with irrigation? i. fishery collapse ii. waterlogging iii. salinization
Irrigation is directly associated with the problem of salinization. Salinization occurs when the soils and groundwater become saltier due to irrigation.
Irrigation is directly associated with which of the following problems?
The other problems, fishery collapse and waterlogging, are not directly related to irrigation.
Fishery collapse is related to overfishing and pollution in the water bodies, whereas waterlogging occurs when the soil is saturated with water and lacks proper drainage.
What is irrigation?Irrigation is the process of applying water to plants or crops to help them grow in a dry or semi-dry area.
It is typically used in areas where rainfall is scarce, or where the water supply is insufficient to meet the needs of the crops or plants grown in the region.
Irrigation can help improve agricultural yields and ensure food security in regions where the population relies on agriculture as the main source of livelihood.
However, it can also lead to various problems, including salinization, depletion of groundwater, and soil erosion.
TO KNOW ABOUT irrigation;
https://brainly.com/question/29892276#
#SPJ11
(1) define the term spatial gravity model and clarify the role of population and distance in the estimation of migration flow from one province to another?
Spatial gravity model The spatial gravity model is a method that is used to estimate migration flow from one region to another. It is based on the idea that migration is affected by both distance and population.
The spatial gravity model is a mathematical model that is used to estimate migration flows between regions. The model is based on the principle of gravity, which states that the force of attraction between two objects is proportional to their mass and inversely proportional to the square of the distance between them.
The spatial gravity model applies this principle to the migration of people, and uses population and distance to estimate migration flows. PopulationThe population is a key factor in the spatial gravity model. The model assumes that the larger the population of a region, the greater the number of people that will migrate from that region.
The model assumes that the farther two regions are from each other, the less likely people are to migrate between them. This is because distance increases the cost of migration, both in terms of money and time, and also because people are less likely to move to regions that are far away from their family and friends.
Estimation of migration The spatial gravity model can be used to estimate migration flows between regions. To do this, the model uses population and distance data for each region, and then calculates the predicted migration flows between each pair of regions.
To know more about Spatial gravity model refer here
https://brainly.com/question/29958576#
#SPJ11