The required tension in cable AB is 1200 N. Determine (a) the vertical force P that must be applied to the pedal, (b) the corresponding reaction at C. The surface of the inclined plane shown is frictionless. If F = 30 N, what is the magnitude of the force exerted on the 3.0-kg block by the 2.0-kg block?

Approximately 3.16 x 10¹² machines at a distance of 5 m are needed to exceed 115 dB at a distance of 5 m.

Decibel (dB) is a unit of measurement that is used to express the relative intensity of sound or the ratio of two power quantities. It is a logarithmic unit that compares the power level of a sound to a reference level.

The decibel scale is logarithmic because the human ear perceives changes in sound intensity logarithmically. Therefore, the use of the decibel scale allows us to express a wide range of sound intensities using a more manageable numerical range.

a) To calculate the volume in decibels, we can use the given formula:

L = 10 lg(I/I0)

First, let's calculate the intensity of the noise:

1 kW = 1000 W

0.01% of 1000 W = 0.01 x 1000 W = 10 W

Area of a sphere with a radius of 5 m = 4πr² = 4π(5 m)² = 314.16 m²

Therefore, the intensity of the noise at a distance of 5 m from the machine is:

I = 10 W / 314.16 m² = 0.0318 W/m²

Now we can use the formula to calculate the volume:

L = 10 lg(I/I0) = 10 lg(0.0318 W/m² / 10⁻¹⁶ W/cm²) = 105 dB

Therefore, the volume of the noise at a distance of 5 m from the machine is 105 dB.

b) To calculate the number of machines needed to exceed 115 dB, we can use the formula in reverse:

L = 10 lg(I/I0)

115 dB = 10 lg(I/I0)

11.5 = lg(I/I0)

I/I0 = 10¹¹°⁵

Now we can calculate the total intensity needed at a distance of 5 m from the machines:

I_total = 10¹¹°⁵ W/m²

For one machine, the intensity of the noise at a distance of 5 m is:

I_machine = 10 W / 314.16 m² = 0.0318 W/m²

So the number of machines needed is:

N = I_total / I_machine = 10¹¹°⁵/ 0.0318 = 3.16 x 10¹²

To know more about noise, visit:

https://brainly.com/question/21988943

#SPJ1

The disk must have traveled a distance of 4.52 meters before coming to a stop.

We can use the equation for the distance traveled by an object under constant acceleration:

d = (v_f^2 - v_i^2) / (2 * a)

The acceleration of the disk is determined by the force of friction, which is given by:

F_friction = friction_coefficient * F_normal

We can find the weight of the disk by using the formula:

F_gravity = m * g

Let's assume the mass of the disk is 0.5 kg. Then:

F_gravity = 0.5 kg * 9.8 m/s^2 = 4.9 N

So the normal force on the disk is also 4.9 N.

Now we can find the force of friction:

F_friction = 0.34 * 4.9 N = 1.67 N

The acceleration of the disk is given by:

a = F_friction / m = 1.67 N / 0.5 kg = 3.34 m/s^2

Plugging this into the equation for distance, we get:

d = (0 - (5.6 m/s)^2) / (2 * (-3.34 m/s^2)) = 4.52 m

Therefore, the disk travels 4.52 meters before coming to a stop, which is less than the length of the court (14.3 m).

More on friction can be found here: https://brainly.com/question/13000653

#SPJ1

Answer:

This is an isolated system

Explanation:

By the definition

"Isolated system is a type of system on which no external force acts on"

In the above diagram, the surroundings are not applying any force on the enclosed system

Hence it is an Isolated system (Option 1)

Hope you understand

Please mark the brainliest :)

Answer:

Magnetic shielding is the process of reducing the magnetic field in a given space by using a material that can redirect or absorb the magnetic field. Some materials are better magnetic shields than others because of their magnetic properties and their ability to interact with magnetic fields.

Materials that are highly permeable to magnetic fields, such as iron, nickel, and cobalt, are excellent magnetic shields. These materials have a high magnetic susceptibility, which means that they can easily become magnetized in the presence of a magnetic field. When a magnetic field is applied to these materials, the magnetic domains within the material align with the external field, creating a magnetic shield that redirects the field away from the protected space.

Other materials, such as copper and aluminum, are not as effective as magnetic shields because they have low magnetic permeability and low magnetic susceptibility. These materials do not easily become magnetized in the presence of a magnetic field, and therefore cannot redirect or absorb the field as effectively as highly permeable materials.

In summary, the effectiveness of a material as a magnetic shield depends on its magnetic properties, including its permeability and susceptibility. Materials that are highly permeable and susceptible to magnetic fields, such as iron, nickel, and cobalt, are better magnetic shields than materials with low permeability and susceptibility, such as copper and aluminum.

Answer:

The magnitude of the total vertical force exerted by the ground on the rear wheels of the truck is 62271.86 N

Explanation:

To find the magnitude of the total vertical force exerted by the ground on the rear wheels of the truck, we need to consider the static equilibrium condition of the truck.

The weight of the truck and its contents acts downwards through its center of gravity (cg) and the normal force exerted by the ground acts upwards. The normal force is distributed between the front and rear axles of the truck according to the position of the cg.

Let F_R be the magnitude of the total vertical force exerted by the ground on the rear wheels of the truck.

Then, from the static equilibrium condition:

Sum of vertical forces = 0

F_R + (8010 kg)(9.81 m/s^2) - F_F = 0

where F_F is the magnitude of the total vertical force exerted by the ground on the front wheels of the truck.

The distance between the cg and the rear axle is given as 0.63(2.3 m) = 1.449 m.

The distance between the cg and the front axle is therefore (2.3 m - 1.449 m) = 0.851 m.

We can assume that the weight is evenly distributed between the four wheels of the truck. Therefore, the weight supported by each wheel is:

(8010 kg)(9.81 m/s^2)/4 = 19653.45 N

Using moments about the rear axle, we get:

F_F(0.851 m) - F_R(1.449 m) = 0

Solving these two equations simultaneously, we get:

F_R = 62271.86 N

Therefore, the magnitude of the total vertical force exerted by the ground on the rear wheels of the truck is 62271.86 N.

The magnitude of the total vertical force exerted by the ground on the rear wheels of the truck is approximately 62,203 N.

Static equilibrium refers to the state of an object at rest when the net force acting on it is zero. In other words, when an object is in static equilibrium, it is not accelerating in any direction and all forces acting on it are balanced.

The principle of static equilibrium states that the sum of all forces acting on an object in static equilibrium is zero, and the sum of all torques (rotational forces) acting on the object is also zero. This principle can be applied to solve problems involving the forces and torques acting on objects at rest.

Static equilibrium is important in many areas of physics and engineering, including structural analysis, civil engineering, and mechanical engineering. Understanding static equilibrium is essential for designing structures and machines that can support loads without collapsing or breaking, and for analyzing the stability of systems in various applications.

Here in the Question,

To find the magnitude of the total vertical force exerted by the ground on the rear wheels of the truck, we need to analyze the forces acting on the truck and apply the principle of static equilibrium, which states that the sum of all forces acting on an object in static equilibrium is zero.

The forces acting on the truck are the weight of the truck and its contents and the reaction forces from the ground acting on each of the four wheels. The weight of the truck and its contents can be represented as a single force acting vertically downwards at the center of gravity (cg) of the truck.

Since the truck is at rest on a horizontal road, the reaction forces from the ground acting on the wheels must balance the weight of the truck and its contents in both the horizontal and vertical directions. The horizontal components of the reaction forces cancel each other out, since the truck is at rest and not moving in the horizontal direction.

To find the vertical forces, we can first find the weight of the truck and its contents:

w = m*g

where w is weight, m is mass, and g is the acceleration due to gravity (9.81 m/s^2).

Substituting the given values, we get:

w = 8010 kg * 9.81 m/s^2 = 78,419.1 N

Next, we can find the position of the center of gravity (cg) relative to the front and rear axles of the truck:

d = L * (m1 - m2) / m

where d is the distance from the cg to the rear axle, L is the distance between the front and rear axles (2.3 m), m1 is the mass of the truck and contents behind the cg, m2 is the mass of the truck and contents in front of the cg, and m is the total mass of the truck and contents.

Substituting the given values, we get:

d = 2.3 m * (8010 kg * 0.63 - 8010 kg * 0.37) / 8010 kg = 0.743 m

Now, we can find the magnitudes of the vertical forces acting on the rear and front wheels of the truck using the principle of static equilibrium. Since the truck is not moving vertically, the sum of the vertical forces acting on it must be zero. Therefore:

Frear + Ffront = w

where Frear is the vertical force exerted by the ground on the rear wheels, Ffront is the vertical force exerted by the ground on the front wheels, and w is the weight of the truck and its contents.

The rear wheels support the weight of the truck and its contents, as well as a portion of the weight shifted forward of the rear axle due to the position of the cg. The front wheels support only a portion of the weight shifted backward of the front axle. To find the magnitudes of the vertical forces, we can use the following equations:

Frear = (m1/m)*w

Ffront = (m2/m)*w

where m1 is the mass of the truck and contents behind the cg, m2 is the mass of the truck and contents in front of the cg, and m is the total mass of the truck and contents.

Substituting the given values and using the value of d found earlier, we get:

Frear = (8010 kg * 0.63 / 8010 kg)*78,419.1 N = 62,202.7 N

Ffront = (8010 kg * 0.37 / 8010 kg)*78,419.1 N = 36,216.4 N

The magnitude of the total vertical force exerted by the ground on the rear wheels of the truck is:

Frear = 62,202.7 N ≈ 62,203 N

Therefore, the magnitude of the total vertical force exerted by the ground on the rear wheels of the truck is approximately 62,203 N.

To learn about momentum and impulse equation  click:

brainly.com/question/30101966

#SPJ2

Answer:

Explanation:

The force of gravity acting on the block can be resolved into two components, one parallel to the incline and one perpendicular to the incline. The perpendicular component is balanced by the normal force of the incline, and the parallel component is opposed by the force of friction. The force of friction is given by:

F_friction = coefficient_of_friction * F_norm

where F_norm is the normal force of the incline. The normal force is equal in magnitude and opposite in direction to the perpendicular component of the force of gravity, which is:

F_perpendicular = m * g * cos(theta)

where m is the mass of the block, g is the acceleration due to gravity, and theta is the angle of inclination.

The parallel component of the force of gravity is:

F_parallel = m * g * sin(theta)

The net force acting on the block is:

F_net = F_parallel - F_friction

Using Newton's second law, F = m * a, we can solve for the acceleration of the block:

a = F_net / m

Substituting the expressions for F_parallel and F_friction, we get:

a = [m * g * sin(theta) - coefficient_of_friction * m * g * cos(theta)] / m

Simplifying, we get:

a = g * [sin(theta) - coefficient_of_friction * cos(theta)]

Substituting the given values, we get:

a = 9.8 m/s^2 * [sin(36°) - 0.55 * cos(36°)] = 6.43 m/s^2

Therefore, the acceleration of the block is 6.43 m/s^2.

The skydiver is accelerating upward with an upward orientation with an acceleration of 0.556 m/s².

The pace at which a speed changes over time is called acceleration. In other words, it is a measurement of how quickly an object's velocity alters. It is a vector quantity with a direction and magnitude.

Finding the net force affecting the skydiver can be our first step. The vector sum of all forces acting on the skydiver is known as the net force. Weight and drag force are the two forces at play here as they affect the skydiver.

The skydiver's weight is determined by:

Weight= mass x acceleration due to gravity

Weight: 82.0 kg x 9.81 m/s² (acceleration due to gravity)

Weight= 804.42 N

The skydiver is under the following net force:

net force = weight - drag force

850 N - 804.42 N = Net force

45.58 N of net force (upwards)

The skydiver will accelerate upwards since the net force is upward. The magnitude of the acceleration can be determined by applying Newton's second law of motion:

Net force is calculated as follows:

Net force = mass x acceleration

45.58 N = 82.0 kg x acceleration

Acceleration = 0.556 m/s².

As a result, the skydiver is accelerating upward with an upward orientation with an acceleration of 0.556 m/s².

To know more about acceleration, visit:

brainly.com/question/30699444

#SPJ1

Answer:

E = h ν     energy of wave of frequency ν

ν = c / λ      frequency of wave in terms of wavelength

E = h c / λ

Since λ = 6.4E-11 is the shortest wavelength this corresponds to the highest potential needed

E = 6.63E-34 * 3.00E8 / 6.4E-11 = 3.11E-15 joules

V = E / q = 3.11E-15 / 1.6E-19 = 19,400 volts

Note (E above is energy required and not the electric field)

Answer:

The first mechanical means for transmitting real-time stock market data from exchange floors to brokers and investors across the country.

Explanation:

To determine the stone's kinetic energy when it touches the ground, we can use the law of conservation of energy. The stone is initially at rest 80 metres above the ground, and its potential energy is provided by: PEi = mg

(ii) For free fall, the body's overall energy supply remains constant at any given moment. It is the same as adding P.E. and K.E.

The energy held by the 10 kg item at 6 inches in height. m above ground is 588 J.

To know more about kinetic energy  visit:-

brainly.com/question/26472013

#SPJ1

As an electron moves towards the positive plate in a uniform electric field between two parallel plates, the distance between the electron and the positive plate decreases, force causing the electric field between them to increase. Hence, the correct option is (2).

In the given diagram, there is a uniform electric field between two parallel plates, with the positive plate on the left and the negative plate on the right. When an electron is placed between the plates and moves towards the positive plate, it experiences a force due to the electric field. The direction of this force is opposite to the direction of the electric field and is given by F = qE, where F is the force, q is the charge of the electron, and E is the electric field. As the electron moves towards the positive plate, the distance between the electron and the positive plate decreases, which means that the electric field between them increases. Therefore, the force acting on the electron also increases according to F = qE. Hence, the correct option is (2) increases.

To know more about force please refer: https://brainly.com/question/30504406

#SPJ1

Answer: The length of track required is 500 m.

Explanation: Determine the object's original velocity by dividing the time it took for the object to travel a given distance by the total distance. In the equation V = d/t, V is the velocity, d is the distance, and t is the time.

Brainliest? <33

Answer:

People are familiar with F = M a in rectilinear motion

Γ = I α is the corresponding relation in rotational motion.

Also, Γ = R X F gives the direction of the torque

When the wheel is turned over the direction of R is reversed since if it was pointing to the right the lever arm on which the force was acting is now pointing to the left. The gravitational force is still pointing downward  so the direction of Γ has been reversed and the gravitational force is still in the downwards direction  and there is a reversal in the torque acting on the wheel.

One can also think of the wheel having bendable spokes. A force that would turn the wheel and bend the spokes in one direction would have the opposite effect when the wheel was turned over. (A force forcing the spokes backwards would still force the spokes backwards when the wheel is turned over but now the wheel is rotating in the opposite direction)

The height of the real tree is 1.92 × 10^-3 cm.

We can use the magnification formula to solve this problem. The magnification formula relates the size of the object to the size of its image and is given by: magnification = size of image/size of the object

In this case, the magnification is given as 1.2 × 10^3, the size of the image is 2.3 cm, and we want to find the size of the object, which is the height of the tree. So we can rearrange the formula to solve for the size of the object: the size of the object = size of the image/magnification

Substituting the given values, we get:

size of object = 2.3 cm / 1.2 × 10^3 = 1.92 × 10^-3 cm

So the height of the real tree is 1.92 × 10^-3 cm.

To learn more about calculating light, refer to:

https://brainly.com/question/30783532

The space station would complete one revolution in about 2.2 minutes.

It's exciting to consider the use of artificial gravity inside a spacecraft. Many believe it would be a smart way to maintain humans' health on lengthy missions, preventing bone and muscle loss over the roughly 18 months it would take to fly to and from Mars in weightlessness.

The period of rotation T can be calculated using the formula T = 2π/ω, where ω is the angular velocity. Since the artificial gravity is equal to 1g, we can use the formula g = ω²r, where r is the radius of the cylinder. When we solve for, we obtain = sqrt(g/r).

Substituting the given values, we get ω = sqrt(9.81 m/s² / (2135/2 m)) = 0.0477 rad/s.

Using the formula for T, we get T = 2π/ω = 131.9 seconds, or approximately 2.2 minutes.

To know more about revolution visit:-

https://brainly.com/question/20598459

#SPJ1

Answer:

i hope this is what you are looking for

The two experimental procedures for determining rate laws are the method of initial rates and the graphical method.

The two experimental procedures for determining rate laws are the method of initial rates and the graphical method.

Method of Initial Rates: This method involves measuring the initial rates of reaction under different initial concentrations of reactants while keeping all other conditions constant. The rate law can be determined by comparing the initial rates with the initial concentrations of the reactants.

Graphical Method: In this method, the concentration of the reactants is plotted against time. The rate law can be determined by analyzing the slope of the resulting curves.

To know more about rate law, here

brainly.com/question/30379408

#SPJ4

Solar energy is an increasingly popular form of energy that is quickly becoming more efficient and cost effective than other sources of energy.

Energy is the capacity of a physical system to do work. It is a property of objects which can be transferred to other objects or converted into different forms, but cannot be created or destroyed. Energy can take the form of kinetic, potential, thermal, electrical, chemical, nuclear, or other various forms.

Solar energy is an abundant, renewable source of energy that can be used to power homes, businesses, and other applications without harming the environment. Solar energy is produced when energy from the sun is captured and converted into electricity. This electricity can be used to power everyday appliances and other activities.

Solar energy has many advantages over other forms of energy. For starters, it is a clean form of energy that does not create any air or water pollution. Additionally, solar energy does not require any finite resources, such as coal or oil, to produce. This means that solar energy is an inexhaustible source of energy and is able to provide an unlimited amount of power. Solar energy is also very cost effective compared to other sources of energy. Solar installations require a significant upfront cost, but the savings in energy costs can be significant.

To learn more about energy

https://brainly.com/question/13881533

#SPJ1

a) The number of excess electrons on the sphere is 1.97 x 10^10 electrons.

b) There are 0.0000857 excess electrons per lead atom.

a) The elementary charge of a single electron is -1.6 x 10^-19 C. To find the number of excess electrons on the sphere, we can divide the total charge by the charge of a single electron:

-3.15 x 10^-9 C / (-1.6 x 10^-19 C/electron) = 1.97 x 10^10 electrons

b) To find the number of excess electrons per lead atom, we need to first find the number of lead atoms in the sphere. We can use the molar mass of lead and the mass of the sphere to find the number of moles of lead:

7.90 g / 207 g/mol = 0.0382 mol

Next, we can use Avogadro's number to find the number of lead atoms:

0.0382 mol x (6.02 x 10^23 atoms/mol) = 2.30 x 10^22 atoms

Finally, we can divide the number of excess electrons by the number of lead atoms:

1.97 x 10^10 electrons / 2.30 x 10^22 atoms ≈ 0.0000857 excess electrons per lead atom.

More on electron charge can be found here: https://brainly.com/question/2553023

#SPJ1

The change in momentum of the ball is -1.215 kg m/s. This is known as the law of conservation of momentum, which states that the total momentum of an isolated system remains constant if no external forces act upon it.

What is Momentum?

Momentum is a physics concept that describes the quantity of motion an object has. It is defined as the product of an object's mass and velocity. The formula for momentum is p = mv, where p is momentum, m is mass, and v is velocity. Momentum is a vector quantity, meaning it has both magnitude and direction. In the absence of external forces, the total momentum of a system is conserved.

a. The initial momentum of the ball can be calculated using the formula:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

p = (0.045 kg) (27 m/s) = 1.215 kg m/s

Therefore, the initial momentum of the ball is 1.215 kg m/s.

b. The final momentum of the ball can also be calculated using the formula:

p = mv

Assuming the ball comes to a stop after being hit, the final velocity will be 0 m/s. So we get:

p = (0.045 kg) (0 m/s) = 0

Therefore, the final momentum of the ball is 0 kg m/s.

c. The change in momentum of the ball can be calculated using the formula:

Δp = pf - pi

where Δp is the change in momentum, pf is the final momentum, and pi is the initial momentum.

Δp = 0 - 1.215 kg m/s = -1.215 kg m/s

Learn more about Momentum from the given link

https://brainly.com/question/1042017

#SPJ1

Answer:

A

Explanation:

The bacteria exists as organic matter

Answer:

a) is probably the answer

Answer:

(1)     you kick the stone

(2)    air molecules are set in motion

(3)    the first molecules set other molecules in motion

(4)     these moving molecules set other molecules in motion

As 500 kg of supplies are added to the truck, the gravitational force between the two vehicles rises from 1.27 106 N to 1.33 106 N.

As a result, when the space between the objects is cut in half, the gravitational force multiplies by four.

The Newton's Law of Universal Gravitation can be used to compute the gravitational force between the two vehicles: F = G * (m1 * m2) / d²

Plugging in the values given in the problem, we get:

F = 6.6743 × 10⁻¹¹ * ((3,650 kg) * (9,850 kg)) / (25.0 m)²

F = 1.27 × 10⁻⁶ N

As a result, there is 1.27 106 N of gravitational force between the two vehicles.

The separation between the two vehicles stays constant. Hence, after entering the updated values, we obtain:

F = 6.6743 × 10⁻¹¹ * ((3,650 kg) * (10,350 kg)) / (25.0 m)²

F = 1.33 × 10⁻⁶ N

To know more about gravitational force visit:-

https://brainly.com/question/12528243

#SPJ1

A.The linear acceleration of block A is [tex]a = -3.42 m/s^2[/tex]

B.The linear acceleration of block B is [tex]a = 3.42 m/s^2[/tex]

C.The angular acceleration of the wheel c  is [tex]a= -31.09 rad/s^2[/tex]

D. The tension in the left side is T = -210.83 N

E.The tension in the right side is T = -58.75 N

A. The linear acceleration of block A can be calculated using the equation for the acceleration of an Atwood's machine:

[tex]a =\frac{ (m2 - m1)g}{ (m1 + m2)}[/tex]

Substituting the given values, the linear acceleration of block A is:

[tex]a =\frac{ (2.00 kg - 5.50 kg) 9.81 m/s^2 }{ (5.50 kg + 2.00 kg)}\\a = -3.42 m/s^2[/tex]

B. The linear acceleration of block B can be calculated using the same equation:

[tex]a =\frac{ (m2 - m1)g}{ (m1 + m2)}[/tex]

Substituting the given values, the linear acceleration of block B is:

[tex]a = \frac{(2.00 kg - 5.50 kg) 9.81 m/s^2 }{ (5.50 kg + 2.00 kg)}\\a = 3.42 m/s^2[/tex]

C. The angular acceleration of the wheel can be calculated using the equation:

[tex]a = \frac{a}{r}[/tex]

where α is the angular acceleration, a is the linear acceleration and r is the radius of the wheel.

Substituting the given values and the value for the linear acceleration of block A, the angular acceleration of the wheel is:

[tex]a = \frac{-3.42 m/s2 }{ 0.110 m}[/tex]

[tex]a= -31.09 rad/s^2[/tex]

D. The tension in the left side of the cord can be calculated using the equation:

T = m1a + m1rα

Substituting the given values, the tension in the left side of the cord is:

T = 5.50 kg (-3.42 m/s2) + 5.50 kg (0.110 m) (-31.09 rad/s2)

T = -210.83 N

E. The tension in the right side of the cord can be calculated using the equation:

T = m2a + m2rα

Substituting the given values, the tension in the right side of the cord is:

T = 2.00 kg (3.42 m/s2) + 2.00 kg (0.110 m) (-31.09 rad/s2)

T = -58.75 N

learn more about Tension Refer:brainly.com/question/13397436

#SPJ1

a) The multimeter in figure 2(a) is set up to measure DC voltage. The setting is indicated by the V with a straight line above it, which stands for "DC voltage".

b) The multimeter in figure 2(a) reads 25.6 V (volts).

c) The multimeter in figure 2(b) is set up to measure DC current. The setting is indicated by the A with a straight line above it, which stands for "DC current".

d) The multimeter in figure 2(b) reads 0.40 A (amperes).

What is multimeter?

A multimeter is an electronic instrument that is used to measure electrical parameters such as voltage, current, and resistance. Multimeters can measure AC and DC voltage, AC and DC current, resistance, continuity, capacitance, and frequency.

What is DC volage?

DC voltage refers to the level or strength of a direct current (DC) electrical signal. Direct current is a type of electrical current that flows in one direction only and does not alternate in polarity. DC voltage can be measured using a multimeter or other voltage measurement instrument, and is typically expressed in volts (V). DC voltage is commonly used in many electronic devices and systems, such as batteries, power supplies, and DC motors.

To know more about the multimeter, visit:

https://brainly.com/question/29442319

#SPJ1

The potential difference across the each bulb and the current entering each bulb.

Each bulb in a straightforward parallel circuit receives the entire battery power. This is explains why the parallel circuit's lights will shine stronger than the series circuit's. The parallel circuit also has the benefit of maintaining an electricity even if one loop is disconnected.

The same brightness is produced when two identical bulbs are linked in parallel as it is when they are connected in a series, which is why.

To know more about potential difference visit:-

https://brainly.com/question/12198573

#SPJ1