The results of inspection of DNA samples taken over the past 10 days are given below. Sample size is 100 Day 1 2 3 4 5 6 7 8 9 10 Defectives 7 9 9 11 7 8 0 11 13 2 The upper and lower 3​-sigma control chart limits​ are: UCL=? LCL=?

Step-by-step explanation:

Well, since this is a 45, 45, 90 triangle, it means that the given side and y have the same length.

Y = 1.5sqrt(2)

this means that X, the hypotenuse is equal to 1.5sqrt(2)^2 + 1.5sqrt(2)^2 = X^2

X is equal to 2.44948974278

Answer:

When an individual has little experience with a group, and the group is believed to be related to a particular behavior or attitude, this is known as stereotyping.

Step-by-step explanation:

Stereotyping refers to a systematic method of categorizing individuals on the basis of a single characteristic, such as age, gender, or race, and then using that classification to make broad assumptions about them. It is a broad generalization that is made about a particular category or group of people. Stereotyping is an unfortunate part of our society, but it is not something that can be prevented entirely.

The most obvious effect of stereotyping is that it causes people to be unfairly labeled and judged. This can lead to discrimination, as well as negative behavior and attitudes towards certain groups of people. Stereotyping can also limit people's opportunities, both personally and professionally. When people are stereotyped, they are often overlooked for jobs, promotions, and other opportunities that they might otherwise be qualified for.

Learn more about stereotyping,

https://brainly.in/question/684699

#SPJ11

The solution of the system of equtaions:

Y = 5x + 1

Y = -x - 5

is (-1, -4), look at the graph at the end.

To solve a system of equations graphically just graph both of the equations, in this case are the lines y = 5x + 1 and y = -x - 5, in the same coordinate axis and then identify the point where these two lines intersect.

That point will be the solution of the given system of equations.

Said graph can be seen in the image at the end. There you can see two lines, one orange and one blue, and the lines intersect at the point (-1, -4), so that is the solution of the system.

Learn more of systems of equations:

https://brainly.com/question/13729904

#SPJ1

The Surface area of the given cuboid is found to be 872 sq, in.

Three-dimensional shapes with length, breadth, and height are called cuboids. Six of the cuboid's sides are referred to as faces.

Surface area of a cuboid is = 2(lw + 2lh + hw0

S.A = 2[(17)*(8) + (8)*(12) +(12)*(17)]

S.A = 2*436

S.A = 872

Thus, the Surface area of the given cuboid is found to be 872 sq, in.

Know more about the cuboid

https://brainly.com/question/26403859

#SPJ1

Answer:

x=4, -4/3

Step-by-step explanation:

(x-4)(3x+4)=0

Using the zero product property, we can set each factor to zero and solve.

x-4 =0     3x+4 =0

x=4            3x =-4

x=4                x = -4/3

The solutions for x are:

x=4, -4/3

Answer:

4, -4/3

Step-by-step explanation:

The value of x is 61° ( nearest degree)

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle. If side opposite the acute angle is the opposite side and the longest side is hypotenuse.

Sin(tetha) = opp/hyp

cos(tetha) = adj/hyp

tan( tetha) = opp/ adj

In this case,

the hypotenuse = 8

opposite = 7

therefore sin x = 7/8

sin x = 0.875

x = sin^-1 ( 0.875)

x = 61° ( nearest degree)

therefore the value of x is 61°

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

The nature of formula (Permutations or Combinations) for each scenario is the following:

1) Permutations ; 2) Combination

3) Combination ; 4) Permutations

5)Permutations ; 6)Combination

7) Combination ; 8)Combination 9)Combination ; 10)Combination.

Permutations formula: Permutation is considered an ordered combination. The general formula for this is,

P(n, r) = n! /(n-r)!

Combination formula: It is considered arrangement ways but without ordered combination. The general formula for this is C(n, r) = n!/ (n-r)! r!

Now, we have provide some situations and we have to resolve them.

1) Determining the top three winners ing Science Quiz have to Bee is an example of Permutation as here we just arrange the position for top winners.

2) Forming lines from six given points with no three of which are collinear, is an example of combination because only pair of points is needed.

3) It will be a combination as here we select 3 points to make a triangle user.

4) Four people posing for pictures is an example of Permutation as oder does not matter.

5) Assembling a jigsaw puzzle is an example of Permutations.

6) As here we choose 2 household chores so it is a combination.

7) Selecting 5 basketball players out of 10 team members for the different positions members it is a combination.

8) Choosing three friend for birthday party is combination formula.

9) Picking 6 balls from a basket by 12 balls is combination formula.

10) Forming a committe of 5 members from do people 20 combinations people.

For more information about permutations and combinations, visit :

https://brainly.com/question/29594894

#SPJ4

Complete question:

P- Permutations or C- Combinations.

1. Determining the top three winners in a Science Quiz Bee

2. Forming lines from six given points with no three of which are collinear

3. Forming triangles from 7 given points with no three of which are collinear

4. Four people posing for pictures

5. Assembling a jigsaw puzzle

6. Choosing 2 household chores to do before dinner

7. Selecting 5 basketball players out of 10 team members for the different positions

8. Choosing three of your classmates to attend your party

9. Picking 6 balls from a basket of 12 balls

10. Forming a committee of 5 members from 20 people

The correct option for the past forecasts using the 2-period moving average method is:
A. F1 = 5582 F2 = 5352 F3 = 5438.5 F4 = 6037.5 F5 = 5736.5

Step-by-step explanation:
1. To calculate F2, take the average of Period 1 and Period 2 actual sales: (5582 + 5122) / 2 = 5352.
2. For F3, average Period 2 and Period 3 actual sales: (5122 + 5755) / 2 = 5438.5.
3. For F4, average Period 3 and Period 4 actual sales: (5755 + 6320) / 2 = 6037.5.
4. For F5, average Period 4 and Period 5 actual sales: (6320 + 5153) / 2 = 5736.5.

"Random variation" encompasses the irregular changes in a time series that are not caused by any other component. Some  common example of random variation is coin toss. It  is independent of the effects of systematic biases. In general, the larger the sample size is, the lower the random variation is of the estimate of a parameter. As random variation decreases, precision increases.

LEARN MORE ON FORECAST AT:https://brainly.com/question/31538767

#SPJ11

The conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. Generally, insurance companies use the number of traffic violations and/or the number of claims a driver has had within a certain time period as indicators of their riskiness.

As Eric has had no accidents or traffic violations, the probability that he is a high-risk driver is very low. However, this does not mean that the probability is zero. There are many other factors which can contribute to a driver's risk, such as age, gender, experience, and location.

If Eric is an experienced driver, who has been driving for many years with no traffic accidents, then the probability of him being a high-risk driver will be lower than the average driver. On the other hand, if Eric is a new driver, or is located in an area with a high rate of traffic accidents, then the probability of him being a high-risk driver may be higher than the average driver.

Overall, the conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. However, this probability can change depending on other factors, such as his age, experience, and location.

See more about conditional probability at: https://brainly.com/question/23382435

#SPJ11

Answer:

a. Since taxes owed ($4,576) are greater than the amount withheld ($4,323), the person would owe an additional amount.

b. The additional amount owed can be calculated by subtracting the amount withheld from the taxes owed:

Additional amount owed = Taxes owed - Amount withheld

= $4,576 - $4,323

= $253

Therefore, the person would owe an additional $253.

Please mark my answer as brainliest!

One possible set of values could be:

29, 30, 31, 52, 53, 54

Given:

Range = 22

Median = 40

Mode = 52

Number of values in the data set = 6

Since the median is 40, it indicates that two values in the data set are below 40, and three values are above 40.

The mode is given as 52, which means that at least one value in the data set is equal to 52.

There are six values in the data set, we can construct a possible set of values:

Min Value + 2 values below median + Mode + 3 values above median + Max Value = 6 values

Let's try one possible combination:

Min Value = 40 - 11 = 29

Max Value = Min Value + Range = 29 + 22 = 51

One possible set of values could be:

29, 30, 31, 52, 53, 54

Here, the range is 51 - 29 = 22, the median is 52, and the mode is also 52.

Learn more about the median of data here:

brainly.com/question/28060453

#SPJ12

The description of the transformations of the parent functions to produce the graphs of f(x) = sin(2x) and g(x) = csc(2x) are

a. The graphs of f(x) = sin(2x) and g(x) = csc(2x) are a horizontal compression by a factor of (1/2) of the graphs of y = sin(x) and y = csc(x).

b. 0, π/2, π, 3·π/2

c. 0, π/2, π, 3·π/2

A transformation of a function is an operation that changes the function's graph in some way.

a. The graph of f(x) = sin(2x) is obtained by taking the graph of sin(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the sine function has been multiplied by 2, which causes the period of the function to be halved.

The graph of g(x) = csc(2x) is obtained by taking the graph of y = csc(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the cosecant function has been multiplied by 2, which causes the period of the function to be halved.

b. The x-intercepts of the graph of f(x) = sin(2x) are the values of x for which f(x) = 0. Since sin(2x) = 0 when 2x is an integer multiple of π, we can find the x-intercepts by solving the equation 2x = n·π for x, where n is an integer. This gives us x = n·π/2. o four x-intercepts of the graph of f are x = 0, x = π/2, x = π, and x = 3·π/2.

c. The vertical asymptotes of the graph of the function g(x) = csc(2x) are the values of x for which g(x) is undefined. Since csc(2x) is undefined when 2x is an integer multiple of π, we can find the vertical asymptotes by solving the equation 2x = n·π for x, where n is an integer. This gives us x = (n·π)/2. So, four vertical asymptotes of the graph of g are x = π/2, x = 3·π/2, x = 5·π/2 and x = 7·π/2.

Learn more on the transformation of a function here: https://brainly.com/question/30968712

#SPJ1

52.

The probability of choosing a red card (heart or diamond) out of a standard deck of 52 playing cards is 26/52. This is because there are 26 red cards in a standard deck, so the probability of choosing one is 26 divided by the total number of cards in the deck

Learn more about probability

brainly.com/question/30034780

#SPJ11

The total area enclosed for a circle must be 40 inches.

To calculate how much wire should be used for the circle, use the formula for the circumference of a circle, C = 2πr, where r is the radius of the circle.

Plugging in the area (A = πr2), you get C = 2*(A/π)1/2. Thus, the total length of wire needed for the circle is 2*(40/π)1/2, which is approximately 12.8 inches.

To calculate the length of wire needed for the circle, the formula for the circumference of a circle is used. This is because the circumference of the circle is the total length of wire needed to make the shape.

The formula for the circumference of a circle is C = 2πr, where r is the radius of the circle. Since we know the area of the circle, A = πr2, we can plug this into the equation for the circumference to get C = 2*(A/π)1/2.

Plugging in the total area (40 inches) gives us the total length of wire needed, which is approximately 12.8 inches.

To know more about circumference click on below link:

https://brainly.com/question/28757341#

#SPJ11

The ratio of Ali's score to Ben's score to Clare's score in its simplest form is  1 : 3.5 : 7

Given data:

Claire's score = 7 * Ali's score

Ben's score = 0.5 * Claire's score

How to solve for the ratio of Ali's score to Ben's score to Clare's score

let Ali's score = x

let Ben's score = y

let Claire's score = z

z = 7 * x = 7x

z = 7x

y = 0.5 * z = 1/2 * z = z / 2

plugging the value of z gives

y = 7x / 2

writing the ratios in terms of x gives

Ali : Ben : Claire

x : y : z

x : 7x/2 : 7x

Reducing the terms by dividing through by x

1 : 7/2 : 7

OR

1 : 3.5 : 7

clearing the fraction gives

2 : 7 : 14

Therefore, the ratio of Ali's score to Ben's score to Clare's score in its simplest form is  1 : 3.5 : 7

To know more about ratio click here.

brainly.com/question/13419413

#SPJ4

Answer:

population, sample

Step-by-step explanation:

A population characteristic is a quantity that summarizes a

population

Correct: Your answer is correct.

. A statistic is a quantity calculated from the values in a

sample

Step-by-step explanation:

[tex]{ \tt{h(x) = {x}^{2} + 4x - 7 }}[/tex]

Substitute for x as -2;

[tex]{ \tt{h( - 2) = {( - 2)}^{2} + 4( - 2) - 7}} \\ \\ { \tt{h( - 2) = 4 - 8 - 7}} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \\ \\ { \tt{h( - 2) = - 11}} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: [/tex]

Answer:-9

Step-by-step explanation:

h(-2)=h(x)

it symbolize that x=-2;

so, we'll replace every x with -2:

-2^2+3*(-2)-7=4-6-7=-9

Answer: 0.5

Step-by-step explanation:

Answer:

As a decimal 0.5, as a fraction 1/2

Class imbalance is a common problem in logistic regression analysis, where one class of data significantly outnumbers the other.

Class imbalance can be problematic because it leads to an over-representation of one class and an under-representation of the other, which can bias the model’s prediction towards the more frequently occurring class.

Class imbalance can cause the model to focus on optimizing accuracy by predicting the majority class more often than the minority class, leading to an underestimation of the minority class. It can also reduce the model’s ability to capture the nuances of the data that can be associated with the minority class. To address this, techniques such as oversampling, undersampling, and cost-sensitive learning can be employed to balance the data and improve model performance.

For more such questions on Logistic regression analysis.

https://brainly.com/question/30621835#

#SPJ11

The mistake in the solution of the expression is in step 3, where the product should be solved first.

Here we have the expression:

0.5*(3*5 + 1) - 2

And we also have the solution in steps, and we want to find in which step we have a mistake.

The first step gives:

0.5*(15 + 1) - 2

Where the first product is solved.

The second step is

0.5*16 - 2

Where we solved the parentheses.

The third step gives:

0.5*14

Here they subtracted the 2 from the 16, but this is incorrect, the first thing that needs to be solved here is the product between 0.5 and 16, we should get:

0.5*16 - 2

8 - 2

6

Learn more about expressions:

https://brainly.com/question/723406

#SPJ1

The probability of observing exactly 4 errors in the carpet is 0.0165 or 1.65%.

The number of weaving errors in a twenty-foot by ten-foot roll of carpet follows a Poisson distribution with a mean of 0.5. We can use the Poisson probability distribution formula to find the probability of observing exactly 4 errors in the carpet:

[tex]P(X = 4) = (e^{-0.5} * 0.5^4) / 4![/tex]

where X is the random variable representing the number of weaving errors. Plugging in the values, we get:

[tex]P(X = 4) = (e^{-0.5} * 0.5^4) / 4! = 0.0165[/tex] (rounded to four decimal places)

Find out more about probability

brainly.com/question/16937914

#SPJ4

10 v^5 w^10

CHEESEburgeCheeseburger

The width of the blackboard is 4 feet and the length is 11 feet.

To solve the equation[tex](w - 2) (w + 2) = 12[/tex]for the width of the blackboard, we can use the distributive property to simplify the left-hand side:

[tex]w^2 - 4 = 12[/tex]

Then we can add four to both sides:

[tex]w^2 = 16[/tex]

When we take the square root of both sides, we get:

w = ±4

We choose the positive solution because the width of the blackboard cannot be negative:

w = 4

We can calculate the length of the blackboard by dividing the area by the width:

l = 44 square feet / 4 feet = 11 feet

As a result, the blackboard's width is 4 feet and its length is 11 feet.

To know more about Width visit:-

https://brainly.com/question/30173060

#SPJ9

Answer:

B is a true statement.

[tex] - 8 < - 3[/tex]

The system of equations that has only one solution is the one where the equations have different slopes, it is the one in option C.

y = 4x - 5

y = -x - 5

A system of linear equations will have only one solution always that the lines are neither parallel nor the same line.

So, one way to check this, is to write both lines in the slope intercept form, and check that the two lines have different slopes.

For example, the first option will give.

y = -4x - 2

y = -4x + 5

These are parallel (same  slope different intercept), then this systm has no solutions.

The correct option will be C, where the system is:

y = 4x - 5

y = -x - 5

The slopes are different.

Learn more about systems of equations at:

https://brainly.com/question/13729904

#SPJ1

The missing dimension of the cone is its height, which is approximately 2.5 m when rounded to the nearest tenth.

We can use the formula for the volume of a cone, which is:

Volume = (1/3)πr²h

where r is the radius of the base and h is the height of the cone.

We are given the volume of the cone as 13.4 m³ and the radius as 3.2 m. Substituting these values into the formula, we get:

13.4 = (1/3)π(3.2)²h

Multiplying both sides by 3 and dividing by π(3.2)², we get:

h = 3 × 13.4 / π(3.2)²

h ≈ 2.5 m

Find more about volume of the cone

brainly.com/question/1578538

#SPJ4

There are 4,826,640 possible ways to award first, second, and third prizes in a contest with 170 contestants.

To calculate this, use the formula nP3, where n is the number of contestants (170) and P3 represents the permutation of 3 elements. This can be simplified to P(170, 3) = 170! / (170 - 3)! = 170 x 169 x 168 = 4,826,640.

Learn more about permutation

brainly.com/question/30649574

#SPJ11

Answer:

9/8

Step-by-step explanation:

1 1/3 + 2 1/4 = (4/3 + 9/4) = (16/12 + 27/12) = 43/12

8 5/8 - 7 1/2 = (69/8 - 15/2) = (69/8 - 60/8) = 9/8

Therefore, 1 1/3 + 2 1/4 = 43/12 and 8 5/8 - 7 1/2 = 9/8.

Therefore , the solution of the given problem of angles comes out to be m∠G= 63° is the response to the second component of the query.

The curved lines which make up the ends of a skew are divided by its highest and bottom walls using Cartesian measurements. There is a possibility who two poles will collide at an intersection. Another result of two objects interacting is an angle. They most closely mimic dihedral shapes. Two line beams can be arranged in different ways between their extremities to form a two-dimensional curve.

Here,

m∠E + m∠F + m∠G = 180°

Additionally, we are aware that mE = (5x + 6)°, mF = (4x - 6)°, and mG = (5x - 2)°. When we enter these numbers into the formula above, we obtain:

=> (5x + 6)° + (4x - 6)° + (5x - 2)° = 180°

When we simplify and find x, we obtain:

=> 14x - 2 = 180

=> 14x = 182

=> x = 13

Now that we know the three vectors' values:

=> m∠E = (5x + 6)° = (5(13) + 6)° = 71°

=> m∠F = (4x - 6)° = (4(13) - 6)° = 46°

=> m∠G = (5x - 2)° = (5(13) - 2)° = 63°

In light of this, mE = 71°, mF = 46°, and mG = 63°.

The first portion of the question has the following solution:

=>  m∠EFG = m∠E + m∠F + m∠G = 71° + 46° + 63° = 180°.

m∠G= 63° is the response to the second component of the query.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1