The distance through which the rider at the end of the beam moves is;
L = 15.5 m
We are told that the beam on which the carnival ride is fixed is 12.6m in length.
Since the seat is at the end of the beam with the other end pivoted and the beam sweeps through an angle of 141°, then we can say that the radius of this arc formed by the swing is;
Radius; r = 12.6 m
Also, θ = 141°
The distance through which the driver moves will be the length of the arc formed by the beam at angle of 141°.
Formula for length of arc is given as;
L = 2πr(θ/360)
Plugging in the relevant values gives;
L = 2π × 12.6 × 141/360
L = 15.5 m
Read more at; https://brainly.com/question/22561081
Bill is sitting on a tree limb that is 4 meters above the ground with a water balloon. He wants to drop the water balloon so that it falls on his friend Tim who is approaching on a bike at a constant speed of 8 meters per second. How far away should Tim be from a point directly under bill when bill drops the balloon?
Answer:
wow poor bill
Explanation:
student measuring the mass of a rock recorded 6.759 g, 6.786 g, 6.812 g, and 6.779 g. which other measurment of the block mass would be most precise ?
Answer: 6.605
Explanation:
10. The SI unit of the solid angle is
a) Degree
b) Steradian
c) Revolution
d) Radian
The S.I unit of solid angle is steradian, or square radian (symbol: sr).
12. Suppose the polar bears were running on land instead of swimming. if the polar bear runs
at a speed of about 5.5m/s how far will it travel in 55 seconds?
the polar bear will travel 302.5m
A +8.75 μC point charge is glued down on a horizontal frictionless table. It is tied to a -6.50 μC point charge by a light, nonconducting 2.50 cm wire. A uniform electric field of magnitude 1.85×108N/C is directed parallel to the wire, as shown in the figure. (Figure 1)
Part A
Find the tension in the wire.
Express your answer with the appropriate units.
Part B
What would the tension be if both charges were negative?
Express your answer with the appropriate units.
(a) The tension on the wire when the two charges have opposite signs is 383.5 N.
(b) The tension on the wire if both charges were negative is 3.640.25 N.
The given parameters;
first charge, q₁ = 8.75 μC second charge, q₂ = -6.5 μC electric field, E = 1.85 x 10⁸ N/Cdistance between the two charges, r = 2.5 cm(a)
The attractive force between the charges is calculated as follows;
[tex]F_1 = \frac{kq_1q_2}{r^2} \\\\F_1 = \frac{(9\times 10^9) \times (8.75\times 10^{-6})\times (-6.5\times 10^{-6})}{(0.025)^2} \\\\F_1 = -819 \ N[/tex]
The force on the negative charge due to the electric field is calculated as follows;
[tex]F_2 = Eq_2\\\\F_2 = (1.85 \times 10^8) \times (6.5 \times 10^{-6})\\\\F_2 = 1202.5 \ N[/tex]
The tension on the wire is the resultant of the two forces and it is calculated as follows;
[tex]T = F_2 + F_1\\\\T = 1202.5 - 819\\\\T = 383.5 \ N[/tex]
(b) when the two charges are negative
The repulsive force between the two charges is calculated as follows;
[tex]F_1 = \frac{kq_1q_2}{r^2} \\\\F_1 = \frac{(9\times 10^9) \times (-8.75\times 10^{-6})\times (-6.5\times 10^{-6})}{(0.025)^2} \\\\F_1 = 819 \ N[/tex]
The force on the first negative charge due to the electric field is calculated as follows;
[tex]F_2 = Eq_1\\\\F_2 = (1.85 \times 10^8)\times (8.75 \times 10^{-6})\\\\F_2 = 1618.75 \ N[/tex]
The force on the second negative charge due to the electric field is calculated as follows;
[tex]F_3 = Eq_2\\\\F_3 = (1.85 \times 10^8) \times (6.5 \times 10^{-6})\\\\F_3 = 1202.5 \ N[/tex]
The tension on the wire is the resultant of the three forces and it is calculated as follows;
[tex]T= F_1 + F_2 + F_3\\\\T= 819 + 1618.75 + 1202.5\\\\T = 3,640.25 \ N[/tex]
Learn more here:https://brainly.com/question/19565286
make a layout plan of your dream fishpond following parts?
Answer:
Do you have. a picture or full page for you're question its saying following parts
What will be the current through a resistance of 50Ω if the applied voltage across the resistance is 117V?
Formulas: V=IR, I=V/R, R=V/I
Note: No need to write the unit of your answer.
2.34 A
Explanation:
[tex]V = IR \Rightarrow I = \dfrac{V}{R} = \dfrac{117\:\text{V}}{50\:Ω} = 2.34\:\text{A}[/tex]
describe in the relationships between all four spheres hydrosphere,atmosphere,biosphere and geosphere support your response with examples
Answer:
The spheres interact with one another, and a change in one might result in a change in another. Humans (biosphere) plough the fields with agricultural machinery made of geosphere materials, while the atmosphere (hydrosphere) provides precipitation to water the plants. The biosphere is home to all living organisms on the earth.
Explanation:
don't ask qestionsmm
define potential difference as used in electricity
Answer:
Explanation:
Testing answer please do not delete
the diffrence in potential betwen two points that represents the work involved or the energy relesed in the transfe of a unit quantity of electicity from one point to the other
PLEASE ANSWER ASAP IM GONNA MARK AS BRAINLIEST
What is the value of the force measured by the spring balance?
10. Unless a light ray comes into contact with a surface or enters a different material, it
travels in a
Answer:
Straight Path
HELP! I need some assistance
Answer:
I'm a Filipino hahahah I'm not
a block starts from rest and begins sliding down an incline. The block reaches a speed of 12 meters per second as it slides a distance of 50 meters. calculate the blocks rate of acceleration
Vf² = V₁² + 2ad
(12 m/s) ² = (0 m/s) ² + 2 (a) (50m)
a = 1.44 m/s ²
Answer:
[tex]\boxed {\boxed {\sf 1.44 \ m/s^2}}[/tex]
Explanation:
We are asked to find the block's rate of acceleration.
We are given the final velocity, initial velocity, and distance. Therefore, we will use the following kinematic equation:
[tex]{v_f}^2={v_i}^2+2ad[/tex]
The block starts at rest or 0 meters per second. The block reaches a final velocity of 12 meters per second. The distance traveled is 50 meters.
[tex]v_i[/tex]= 0 m/s [tex]v_f[/tex]= 12 m/s [tex]d[/tex]= 50 mSubstitute the values into the formula.
[tex](12 \ m/s)^2 = (0 m/s)^2 + 2a (50 \ m)[/tex]
Solve the exponents.
(12 m/s)² = 12 m/s * 12 m/s = 144 m²/s²(0 m/s)² = 0 m/s * 0 m/s = 0 m²/s²[tex]144 \ m^2/s^2= 0 m^2/s^2 + 2a (50 \ m)[/tex]
The 0 can be subtracted from both sides, or simply canceled.
[tex]144 \ m^2/s^2 = 2a (50 \ m)[/tex]
Multiply 2 and 50 meters.
[tex]144 \ m^2/s^2 = (2 *50 \ m)* a[/tex]
[tex]144 \ m^2/s^2 = (100 \ m)* a[/tex]
We are solving for a, so we must isolate the variable. It is being multiplied by 100 meters. The inverse of multiplication is division, so we divide both sides by 100 meters.
[tex]\frac {144 \ m^2/s^2}{100 \ m}= \frac{(100 \ m)*a}{100 \ m}[/tex]
[tex]\frac {144 \ m^2/s^2}{100 \ m}=a[/tex]
[tex]1.44 \ m/s^2 =a[/tex]
The block's rate of acceleration is 1.44 meters per second squared.
You are having a snowball fight with your best friend on a frosty winter day. You are standing on the roof of your 5 m tall house with a 0.4 kg snowball. You drop the snowball downward from rest toward your friend,
who is making snow angels below you. Ignoring air resistance, solve for the gravitational potential energy of
the snowball before it is released.
a) 12.5 J
b) 19.6J
c) 5J
d) 2J
Answer: B 19.6J
Explanation: The equation for Potential energy is PE=mgh
PE is the potential energy
m=Mass=0.4kg
g=Gravity=9.81m/[tex]s^{2}[/tex]
h=Height=5 metres
(0.4 kg)*(9.81m/[tex]s^{2}[/tex])*(5 metres)=19.62J
4. A gas's solubility is best in a liquid solvent when the solution is under high or low pressure
Answer:
low pressure
Explanation:
Given below are the names of some objects and materials: Water, basket ball, orange, sugar, globe, apple and earthen pitcher Group them as Eatables and Non eatables.
hope it helps
11. A plow pushes 100 kg of snow with 300 N of force. How much is the pile of snow
accelerated?
Answer:
Explanation:
This is an application of Newton's second Law.
Formula
F = m * a
F = 300 N
m = 100 kg
a = ?
F = m * a
300N = 100 kg * a Divide by 100
300N/100kg = a
a = 3 m/sec^2
Which is the largest number? O A. 9.9 x 106 O B. 4.5 x 107 O c. 5.5 x 105 O D. 5.8 x 108
Answer:
107
Explanation:
It's the biggest numberWhen converted to a household measurement, 9 kilograms is approximately equal to a
Answer:
D) 19.8 lbs
Explanation:
1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.
1kg is also equal to 2.205 lbs. 9*2.205=19.8416
9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system
a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.
This leaves us with 19.8 lbs
What is an involuntary and a voluntary muscle action?
Answer:
Involuntary muscle action are muscles that move WITHOUT conscious control, and voluntary muscle action are muscles that move WITH conscious control.
Explanation:
A example of a involuntary muscle action would be your heart. Your heart is a muscle beats without you thinking about it and is very vital to your body. A example of a voluntary muscle would be the muscles that are attached to your bones and allow you to move your body, and it's voluntary because your body won't move on it's own.
Hope this helps.
A boy 11.0 m above the ground in a tree throws a ball for his dog, who is standing right below the tree and starts running the instant the ball is thrown. If the boy throws the ball upward at 50.0 ∘ above the horizontal, at 8.00 m/s .
How fast must the dog run to catch the ball just as it reaches the ground?
How far from the tree will the dog catch the ball?
12414253
Explanation:
A closed, uninsulated system fitted with movable piston, so no matter is exchanged with the surroundings, was assembled. Introduction of 430 J of heat caused the system to expand, doing 238 J of work against a constant pressure of 101 kPa. What is the value of for this process
Answer: You do not specify what is being asked for. ∆E? ∆H?
∆E = (430 - 238) J = 192 J
∆H = 430 J
Explanation:
If asked for the value of ∆H the answer is simply the change in heat, and in the question, it states introduction of 430 J of heat is causing the system to expand.
Therefore ∆H = 430 J
If asked for ∆E, we know that ∆E = ±q (heat) + work (-P∆V) = ±q + w
The question states that 238 J of work are done AND the system expanded
(work is negative because expansion means work is done BY the system, releasing energy/heat... Conversely, if the system were compressed, work is done ON the system, absorbing heat/energy)
Therefore, ∆E = (430 - 238) J = 192 J
HELP HELP!
Which of the following surfaces would have the lowest amount of friction?
a. Glass
b. Sand
c. Wood
d. Ice
Answer:
d. Ice
Explanation:
I WILL MARK BRAINLIEST !! PLEASE HELP!
Answer:
b
Explanation:
the hanging
mass would need to be
Answer:
what do you need help with I can try to help you
giúp em toàn bộ nhé ............
Explanation:
nnnnkgcbchg of bbjbjk oh jjzjjzkedkkdkfjjsjdsjfkjfdkkdowkronqfojofj see j FC
what is 4 differences between saturated unsaturated and supersaturated solutions
Answer:
Unsaturated Solution: Less amount of salt in water, clear solution, no precipitation. Saturated Solution: The maximum amount of salt is dissolved in water, Colour of the solution slightly changes, but no precipitation. Supersaturated Solution: More salt is dissolved in water, Cloudy solution, precipitation is visible.
Two particles of a gas collide. Why is this considered an elastic collision? (1 point)
O They bounce off each other, conserving momentum only.
O They stick together, conserving momentum.
O They bounce off each other, conserving energy only.
O They bounce off each other, conserving energy and momentum.
They bounce off each other, conserving energy and momentum.
This is considered an elastic collision because they bounce off each other, conserving energy only.
Gas is the state of matter that is made up of particles which freely move about its container and they bounce off each other.
As the particles move over each other they collide without exerting any force in each other. This is known as elastic collision.
Kinetic energy is conserved in elastic collisions which occurs between gas molecules.
While in inelastic collision, momentum is conserved and kinetic energy is not.
Because the gas particles do not stick together as they collide, no force is exerted and kinetic energy is therefore conserved.
Learn more here:
https://brainly.com/question/24478517
I NEED A 100% ACCURATE ANSWER FOR THIS QUESTION ASAP NO LINKS !!!
What is defined by force per unit area?
1: gravity
2: force
3: temperature
4: pressure
Answer:
4. pressure is defined as force per unit area
Pressure is defined by force per unit area.
WHAT IS PRESSURE:Pressure refers to the force applied to a substance per unit area. Force is measured in Newtons (N) while area is measured in m², hence, the unit of pressure is N/m² also called pascal.Therefore, according to this question, it can be said that pressure is defined by force per unit area
Learn more about pressure at: https://brainly.com/question/356585
Pls help thx need asap!!
Answer:
10N right
Explanation:
First, we need to find the base of the triangle to find the force acting on the right of the object.
We have been given the hypotenuse and we need to find the adjacent, so we are using cosSOH, CAH, TOAcos(θ) = adjacent ÷ hypotenuseNext, sub in the values (we don't know the adjacent so i've called it x):
cos(60) = x ÷ 60To find x, we need to multiply both sides by 60
60 × cos(60) = xx = 30 NNow we know all the forces, we can work out the net force:
Both of the 40N cancel out because they are opposite forcesThe force on the right of the object is 10N stronger than the force on the left (30N - 20N), so the object would move to the right