The size of a computer screen is determined by the length of its diagonal. Each student in Mrs. W's math class
was asked to measure the diagonal of his or her Chromebook. Jason's measurements was 13 inches. The
computer's actual diagonal length is 14 inches. Calculate the percent error for Jason's measurement.

a) Approximately 29.50% of brake pads will contain less than 32.5% copper. b)  The approximate distribution of the sample mean copper percentage is a normal distribution with mean 34 and standard error 0.7.

a)To solve this problem, we can use the z-score formula to standardize the value of 32.5 using the mean and standard deviation given:

z = (x - μ) / σ

where x is the value we are interested in (32.5), μ is the mean (34), and σ is the standard deviation (2.8).

Substituting these values, we get:

z = (32.5 - 34) / 2.8 = -0.536

Using a standard normal distribution table or calculator, we can find the probability of a z-score less than -0.536, which is approximately 0.2950 or 29.50%. Therefore, approximately 29.50% of brake pads will contain less than 32.5% copper.

b) The sample mean copper percentage of 16 pads will also follow an approximate normal distribution with mean μ = 34 and standard deviation σ/√n = 2.8/√16 = 0.7, where n is the sample size.

Therefore, the approximate distribution of the sample mean copper percentage can be expressed as:

X ~ N(34, 0.7)

where X is the sample mean copper percentage.

The mean of this distribution is equal to the population mean μ, which is 34. The standard error of the mean (also known as the standard deviation of the sampling distribution) is given by σ/√n, which is 0.7 in this case.

Learn more about  normal distribution and sampling distribution of the mean:https://brainly.com/question/29368683

#SPJ11

Your question is incomplete, but probably the complete question is :

Assume the distribution of copper content (%) in sintered brake pads follows an approximate normal distribution with a mean of 34 and a standard deviation of 2.8

a.) What percentage of brake pads will contain less than 32.5% copper?

b.) What is the approximate distribution of the sample mean copper percentage if we sample 16 pads? Include the mean and standard error of this distribution

The given chain which has a negligible mass is draped over the sprocket which has a mass of 2 kg and a radius of gyration of k0=50 mm.

If the 4-kg block A is released from rest in the position s=2 m. Using energy methods, determine the angular velocity of the sprocket at the instant s=4 m.First of all, draw a FBD of the system at s=2 m and at s=4 m.At s=2 m Let the velocity of the block A be v2m/s.At s=4 m Let the velocity of the block A be v4m/s.Let the angular velocity of the sprocket be ω rad/s. Draw FBD at both states and clearly label datum.For the block A at s=2 m Velocity of the block A, v=0 (Initial velocity)

Kinetic energy of the block A,KE1=12mv²=12×4×(0)²=0Potential energy of the block A,PE1=mgh=4×9.81×2=78.48JFor the block A at s=4 mLet h be the height by which the [tex],KE1=12mv²=12×4×(0)²=0[/tex]block A falls. Velocity of the block A, [tex]v=√2gh=√2×9.81×h[/tex]Kinetic energy of the block A,KE2=[tex]12mv²=12×4×[√2gh]²=8gh[/tex] Joule (J)Total potential energy of the system at s=2 m,PE1=2×g×k0 Joule (J)When the block falls from s=2 m to s=4 m, the change in the potential energy of the system is,ΔPE=PE2-PE1Where,PE2=2×g×(2k0) Joule (J)Let the change in the potential energy of the system be ΔPE1 Joule (J).

So,ΔPE1=PE2-PE1=2gk0 Joule (J)The total energy of the system is conserved.

So,ΔPE1=KE2ω²+Iω²Where,ΔPE1 is the change in the potential energy of the systemKE2 is the kinetic energy of the block A when it is at s=4 mI is the moment of inertia of the sprocket about its axisω is the angular velocity of the sprocket at s=4 mSo,ω²=ΔPE1KE2+Iω²Substitute the values of ΔPE1, KE2 and I in the above equation.

[tex]ω²=(2gk0)8gh+mr²ω²=(2×9.81×50×10⁻³)8×h×h+2×1×(50×10⁻³)²ω²=0.7848h²+2.5×10⁻³[/tex]

Therefore,ω=√(0.7848h²+2.5×10⁻³) rad/s.

Substitute the value of h=2 m in the above equation.ω=2.808 rad/s.So, the angular velocity of the sprocket at the instant s=4 m is 2.808 rad/s.

for such more questions on angular velocity

https://brainly.com/question/6860269

#SPJ11

The fence ought to be cut into 12 pieces, every one of length 28 m, to make three squares, each with a side length of 28 m. This will limit the total area encased by the fence.

To limit the total area encased by the fence, the three squares ought to have equivalent areas. Let x be the length of each side of the squares. Then the perimeter of each square is 4x, and the total length of the fence is 3(4x) = 12x. Since the total length of the fence is given to be 336 m, we have:

12x = 336

Addressing for x, we get:

x = 28

Find out more about fence

brainly.com/question/14785438

#SPJ4

I Hope it is correct

Step-by-step explanation:

The total number of sodas in the fridge is:

6 + 4 + 5 + 9 + 7 + 3 + 6 = 40

The number of NuGrapes or ginger ales is:

7 (NuGrapes) + 6 (Canada Dry ginger ales) = 13

The probability of selecting a NuGrape or a ginger ale is the number of favorable outcomes (selecting a NuGrape or a ginger ale) divided by the total number of possible outcomes (selecting any soda):

Probability = Number of favorable outcomes / Total number of possible outcomes

Probability = 13 / 40

Probability = 0.325

So, the probability of selecting a NuGrape or a ginger ale is 0.325 or 32.5%.

To compute a 90% confidence interval for the population proportion with a margin of error of 0.08 and no prior estimate for the population proportion, a sample size of 181 is needed.

To determine the sample size needed to compute the 90% confidence interval for the population proportion with a margin of error of 0.08, we can use the formula:

n = (z^2 * p * (1 - p)) / E^2

where n is the sample size needed, z is the z-score for the desired confidence level (90% confidence level has a z-score of 1.645), p is the estimated proportion (since no prior estimate is available, we use 0.5 as a conservative estimate), E is the margin of error (0.08)

Substituting the given values, we get:

n = (1.645^2 * 0.5 * (1 - 0.5)) / 0.08^2

n = 180.99

Rounding up to the nearest whole number, we get:

n = 181

Therefore, a sample size of 181 is needed to compute the 90% confidence interval for the population proportion with a margin of error of 0.08, when no prior estimate for the population proportion is available.

To know more about confidence interval:

https://brainly.com/question/30979600

#SPJ4

A correlation coefficient of 21.34 is an impossible value.

In statistics, correlation is defined as the degree of association between two or more variables. Correlation research helps to establish whether a relationship exists between two variables, and if so, to what extent. The correlation coefficient is a statistical measure used to quantify the degree of association between two variables.

The correlation coefficient, which ranges from -1 to +1, indicates the strength of the relationship between the two variables. When the correlation coefficient is 0, it indicates that there is no correlation between the two variables. When the correlation coefficient is positive, it indicates that the two variables are directly related, whereas when the correlation coefficient is negative, it indicates that the two variables are inversely related.

In this case, a correlation study reported a linear correlation coefficient of 21.34, which is not possible. Correlation coefficients range from -1 to +1. The value of the correlation coefficient ranges from -1 to +1, where a value of 0 indicates no correlation, a value of 1 indicates perfect positive correlation, and a value of -1 indicates perfect negative correlation. Therefore, a correlation coefficient of 21.34 is an impossible value.

In this case, it is likely that the correlation coefficient was misreported or that a different statistical measure was used. It is important to carefully examine and verify statistical findings before drawing any conclusions or making decisions based on the results.

To know more about correlation coefficient refer here:

https://brainly.com/question/15577278

#SPJ11

The rate of decrease of the side of the cube with a side of 6 cm is 0.25 cm per second.

The rate of decrease of the side of an ice cube can be calculated by considering the volume of the cube. The volume of the cube is decreasing at a rate of 1.5 cm3 per second. Therefore, the rate of decrease of the side of the cube is proportional to the cube's volume.

To calculate the rate of decrease of the side of the cube, we need to use the formula for the volume of a cube, which is: V = s3, where V is the volume and s is the side of the cube.

Since we know that the volume of the cube is decreasing at a rate of 1.5 cm3 per second, we can calculate the rate of decrease of the side of the cube by substituting the value of the rate of decrease of the volume and the current side of the cube (6 cm) into the formula.

Therefore, the rate of decrease of the side of the cube is equal to 1.5 cm3 per second divided by 6 cm3, which is equal to 0.25 cm per second.

In conclusion, the rate of decrease of the side of the cube with a side of 6 cm is 0.25 cm per second.

See more about volume at: https://brainly.com/question/463363

#SPJ11

Proportionately, the cost of the board game without the sales tax is $28.00.

The sales tax is the levy imposed by the government on the consumption and production of certain goods and services.

The purposes of imposing sales taxes are to discourage consumption and to increase governmental revenue.

Proportion refers to the equation of two ratios.

In this situation, we can equate the value of the sales tax with its percentage to determine the cost of the board game.

The sales tax in dollars = $1.54

The sales tax rate = 5.5%

Proportionately, the value of the board game without the sales tax = $28.00 ($1.54/5.5%).

Learn more about the sales tax at https://brainly.com/question/30109497

#SPJ1

How how is the cost?

Option B, The fact that this survey question is a double-barreled question makes it problematic.

A survey question known as a double-barreled question has two questions inside one, making it challenging for respondents to give truthful and insightful responses.

The offered inquiry, in this instance, combines two distinct inquiries: if the phone was acquired within the last two years and whether it has recently had an upgrade.

Inconsistent answers might result from a person who bought their phone more than two years ago but only recently upgraded it, or vice versa. In order to prevent double-barreled questions and guarantee that responders can give precise and complete replies, each question should be isolated and posed independently.

Learn more about the survey at

https://brainly.com/question/17373064

#SPJ4

The question is -

What is the problem with this question item that appeared in a survey? was your phone purchased in the last two years and have you recently updated it?

a. It is a leading question

b. It involves negative wording

c. It is a double-barreled question

d. It is not on a Likert Scale

If triangles 1 and 2 are similar, the ratio relates a side length of triangle 1 to the corresponding side length of triangle 2 is 2:3.

Since Triangles 1 and 2 are similar, their corresponding sides are proportional. This means that the ratio of the length of any corresponding pair of sides in the two triangles will be equal.

To determine the ratio of the side lengths of triangle 1 to the corresponding side lengths of triangle 2, we can choose any two corresponding sides and divide their lengths.

Let's choose side AC of triangle 1 and side DF of triangle 2. We know that these two sides are corresponding because they are both opposite angles that have the same measure.

The length of side AC in triangle 1 is given as 17, and the length of side DF in triangle 2 is given as 25.5. Therefore, the ratio of the length of side AC to side DF is:

AC/DF = 17/25.5 = 0.6667 or 2/3

So the ratio of the length of a side in triangle 1 to the corresponding side in triangle 2 is 2:3. This means that if we multiply any side length in triangle 1 by 2, we will get the length of the corresponding side in triangle 2.

To learn more about triangles click on,

https://brainly.com/question/30232667

#SPJ4

When a person standing in neutral flexes their right shoulder so that their arm is horizontal with the ground, the center of gravity (mass) will shift towards the left side of the body.

Explanation:

The point at which the weight of a body or an object is concentrated, that is, the point at which the mass of the body or the object is focused is known as the center of gravity. The center of gravity (CG) is the point where the weight of the body is supposed to act, which is the point about which the body remains in balance. The body's center of gravity is important because it affects its balance and stability

                             .When a person is standing in a neutral position, the center of gravity is in the midline of the body. When the person flexes their right shoulder and holds their arm horizontally, the center of gravity will shift towards the left side of the body. This is because the weight of the arm is now being supported by the left side of the body. The shift in the center of gravity will cause the person to adjust their posture to maintain balance and stability.

To know more about center of gravity:

https://brainly.com/question/17409320

#SPJ11

According to the given exponential equations it is proved that b = (ac) / (a+b) where a+b ≠ 0.

We are given the first equation as [tex]3^{a} = 21^{b}[/tex] ----(1) i.e 3 to the power a is equal to 21 to the power b.

The next exponential equation is [tex]7^{c} = 21^{b}[/tex] ----(2)

We know, 21 can be written as 3*7 because they are the factors of 21. Therefore, [tex]21^{b} = (3*7)^{b} = 3^{b}7^{b}[/tex]

Substituting equations (1) and (2), we get:

[tex]3^{a}= 3^{b} *7^{b}[/tex]

Taking logarithm base 3 on both sides:

a = blog3(37)

a = b*(log3(3) + log3(7))

a = b*(1 + log3(7))

b = a / (1 + log3(7)) ------ (3)

Similarly, taking logarithm base 7 on both sides of equation (2):

c = b*log7(21)

c = b*(log7(3) + log7(7))

c = b*(1 + log7(3/7))

b = c / (1 + log7(3/7)) ------ (4)

Substituting (3) and (4) in the given equation, we get:

a / (1 + log3(7)) = (ac) / (a+b) * (1 + log7(3/7))

After cross-multiplying and simplifying the equations,

b = (ac) / (a+b)

Hence,b = (ac) / (a+b)

Learn more about logarithm,

https://brainly.com/question/1807994

#SPJ4

The coordinates for the dilated triangle is obtained as A'(-1, 8), B'(-7, 6), and C'(-7, -4).

What is dilation?

Resizing an item uses a transition called dilation. Dilation is used to enlarge or contract the items. The result of this transformation is an image with the same shape as the original. However, there is a variation in the shape's size. The initial shape should be stretched or contracted during a dilatation.

The coordinates point of the triangle is given as -

A (-1,6)

B (-4,5)

C (-4,0)

To dilate triangle ABC by a scale factor of 2 about the point (-1, 4), we can follow these steps -

Translate the triangle so that the center of dilation is at the origin.

We can do this by subtracting (-1, 4) from each vertex -

A' = (-1, 6) - (-1, 4) = (0, 2)

B' = (-4, 5) - (-1, 4) = (-3, 1)

C' = (-4, 0) - (-1, 4) = (-3, -4)

Dilate the translated triangle by multiplying the coordinates of each vertex by the scale factor of 2 -

A'' = 2(0, 2) = (0, 4)

B'' = 2(-3, 1) = (-6, 2)

C'' = 2(-3, -4) = (-6, -8)

Translate the dilated triangle back to its original position by adding (-1, 4) to each vertex -

A'B'C' = A'' + (-1, 4) = (-1, 8)

B'' + (-1, 4) = (-7, 6)

C'' + (-1, 4) = (-7, -4)

Therefore, the coordinates of the dilated triangle A'B'C' are (-1, 8), (-7, 6), and (-7, -4).

To learn more about dilation from the given link

https://brainly.com/question/3457976

#SPJ1

A requirement of a random sample is that every individual has an equal chance of being selected.

What is a random sample? A random sample is a process of selecting members from a population, that each member has an equal chance of being chosen. In a random sample, each member of the population has an equal chance of being selected.

Therefore, every individual has an equal chance of being selected is a requirement of a random sample. So, option A is the correct answer. It is the most essential part of random sampling.

There are various types of random sampling techniques, including simple random sampling, stratified sampling, cluster sampling, and systematic sampling.

The objective of random sampling is to acquire an unbiased sample that represents the entire population fairly. The primary purpose of random sampling is to minimize bias while selecting the members of a population.

Hence, most essential part of Random Sampling is that every individual has an equal chance of being selected.

For more information on Random Sampling, refer here:

https://brainly.com/question/29852583#

#SPJ11

2x + y = -7

y= -7-2x

put this value in 2nd equation

3x=6+4(-7-2x)

3x=6-28-8x

11x= -22

x= -2

y= -7-2(-2)

y= -7+4

y= -3

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.

Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.

the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:

m∠MGS = 90°

Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.

m∠SGM = 1/2 (mSE - mGE)

where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.

mSE = 2mGS

mSE = 2(84°) = 168°

m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°

Therefοre, m∠SGM = 84°.

To knοw more about secant line visit,

https://brainly.com/question/14438198

#SPJ1

Therefore, the teacher must initially invest at least $7,725 to retire with at least $125,000 in the account after 40 years at a 6.95% annual interest rate compounded continuously.

Percent is a way of expressing a number as a fraction of 100. It is often denoted by the symbol "%". Percentages are commonly used to describe proportions or rates, such as the percentage of students who passed a test, the percentage of a population that belongs to a certain group, or the percentage increase or decrease in a quantity over time. Percentages are also used in calculations involving discounts, taxes, interest rates, and other financial applications.

Here,

The formula for the continuous compounding interest is given by:

[tex]A = Pe^{rt}[/tex]

where A is the final amount, P is the principal amount (initial investment), e is the constant 2.71828..., r is the annual interest rate as a decimal, and t is the time in years.

In this case, we want to solve for the initial investment P, given that the teacher wants to retire with at least $125,000 in the account after 40 years, and the annual interest rate is 6.95% compounded continuously. Therefore, we have:

A = $125,000

r = 0.0695 (annual interest rate as a decimal)

t = 40 years

Substituting these values into the formula, we get:

$125,000 = [tex]Pe^{0.0695*40}[/tex]

Dividing both sides by [tex]e^{0.0695*40}[/tex], we get:

P = $125,000 / [tex]e^{0.0695*40}[/tex]

Using a calculator, we find that [tex]e^{0.0695*40}[/tex] is approximately 16.173, so:

P = $125,000 / 16.173

P ≈ $7,725.32

To know more about percent,

https://brainly.com/question/29172752

#SPJ1

The smallest value of x in the Poisson distribution is 0, which means that no cars can pass through the intersection in a given minute.

For explain further, a Poisson distribution is a statistical model that describes the probability of a given number of events occurring in a fixed period of time, such as cars passing through an intersection in a minute.

In a Poisson distribution, the probability of x events occurring in a given minute is given by the equation P(x) = e-λλx/x!, where λ is the average number of events in a given minute. In this case, λ would be the average number of cars that pass through the intersection per minute.

The probability of 0 cars passing through the intersection in a given minute is e-λλ0/0! = 1, which is the highest probability in the distribution. Therefore, the smallest value of x in a Poisson distribution is 0.

To learn more about Poisson distribution here:

https://brainly.com/question/7283210#

#SPJ11

Answer:

What is the probability of rolling an odd product? 1/4

What is the probability of rolling a product that is greater than or equal to 20? 2/9

What is the probability of rolling a product that is less than 10? 17/36

What is the probability of rolling a product that is a multiple of 10? 1/6

The nurse will administer 3 tablets of Coreg to meet the prescribed dosage of 9.375 mg PO daily.

The prescription order is for the nurse to administer 9.375mg of Coreg tablets orally each day. The Coreg tablets have a dosage strength of 3.125mg per tablet. To calculate the number of tablets the nurse needs to administer, we can divide the total dosage needed (9.375mg) by the dosage strength per tablet (3.125mg per tablet).

This results in the nurse administering 3 tablets to meet the prescribed dosage. Therefore, the nurse should give 3 tablets of Coreg to the patient each day to ensure they receive the correct amount of medication.

Learn more about division here

brainly.com/question/4933139

#SPJ4

The given question is incomplete, the complete question is:

the pharmacy sends the nurse the following coreg tablets. the order is to administer 9.375 mg po daily. how many tablets will the nurse administer? enter only the numeral (not the unit of measurement) in your answer.

Answer:

We can use the formula:

time = distance ÷ speed

where distance is in kilometers (km) and speed is in kilometers per hour (km/h).

Substituting the given values, we get:

time = 340 km ÷ 12 km/h

time = 28.33 hours (rounded to two decimal places)

Therefore, it takes approximately 28.33 hours for the car to travel a distance of 340 km at an average speed of 12 km/h.

Answer:28hrs and 20min

Step-by-step explanation:

rgrghwrt

It took 5 seconds for the thunder to be heard, the lightning was 343 * 5 = 1715 meters away.

The distance between the lightning flash and hearing the thunder can be calculated using the speed of sound. The speed of sound in air at 20°C is 343 meters/second.

Explanation: When lightning strikes, the initial flash travels at the speed of light, which is 299,792,458 meters per second. The sound wave created by the flash, however, travels at a much slower speed.

The speed of sound in air at 20°C is 343 meters per second.

To calculate the distance of the lightning, we multiply the speed of sound by the amount of time it took to hear the thunder. In this case, the amount of time was 5 seconds, so the lightning was 1715 meters away (343 * 5 = 1715).

To know more about lightning flash click on below link:

https://brainly.com/question/1045095#

#SPJ11

A female student's probability of not receiving an A is 0.56, or 56%.

Probability and probability, as well as its cognates in various modern languages, come from the educated Latin of the Middle Ages called probabilis, which Cicero used to refer to a viewpoint as being plausible or generally accepted. Ancient French probabilite is where the word probability came from (14 c.)

We must utilise the data in the table to determine the likelihood that a female student will not receive an A.

There are 16 male students and 9 female students in the class, according to the table. Of the nine female students, four received As compared to five Bs.

Hence, the The likelihood that a female student won't receive an A is: P (Female student does not have an A) = Total number of female students / Number of female students without an A

P

Female student does not have an A (Female student does not have an A) = 5/9 P(Female student does not have an A) = 0.56 or 56%.

To know more about probability visit:-
https://brainly.com/question/30034780

#SPJ1

Answer:

y=5x-7

Step-by-step explanation:

The amount of simple interest owed for the loan is $30,010.00.

A method for determining the proportion of interest paid on a sum over a predetermined period of time at a predetermined rate is called simple interest. In simple interest, the principal amount remains unchanged. A straightforward and simple method for calculating money interest is simple interest.

To calculate the simple interest, we use the formula:

Simple Interest = P * r * t

where P is the principal amount, r is the interest rate as a decimal, and t is the time period in years.

Substituting the given values, we get:

Simple Interest = $15,400 * 0.15 * 13

= $30,010.00

Therefore, the amount of simple interest owed for the use of the loan is $30,010.00.

Learn more about Simple Interest:

https://brainly.com/question/25793394
#SPJ4

The different types of outputs that are possible when performing intersect and union include points, lines, and polygons.

Intersect: It is a binary operation that compares two shapes and returns the geometries that they have in common. The result of an intersect operation is either a point, line, or polygon, depending on the shapes being compared. If two points intersect, the result is a point. If two lines intersect, the result is a point or a line. If two polygons intersect, the result is a polygon that contains the intersecting area.

Union: It is a binary operation that combines two shapes into one. The result of a union operation is a polygon, line, or point, depending on the shapes being combined. If two points are combined, the result is a point. If two lines are combined, the result is a line or a polygon. If two polygons are combined, the result is a larger polygon that contains both shapes. In some cases, the result of a union operation may not be a single shape, but rather a set of shapes.

Learn more about binary operation here:

https://brainly.com/question/30828577

#SPJ11