The sound that reaches the ears after bouncing off a wall or a floor is called _____.
(a) direct sound
(b) indirect sound
(c) virtual sound
(d) harmonics.

The rate of fuel consumption is 6.69 kg/hr.

Solution:

To determine the rate of fuel consumption, we need to calculate the amount of energy required by the engine and divide that by the thermal efficiency.

From the question:

W = 110 hp

η = 28%.

r = ?

First, we can convert the power output from horsepower to watts:

1hp = 746 W

power output = 110 hp x 746 W/hp

                       = 82016 W

Then, we can calculate the energy required by the engine by multiplying the power output by the time the engine is running:

Energy = Power x time

Without knowing the time the engine runs, we cannot calculate the energy required.

We can calculate the fuel consumption by using the heating value of the fuel and the thermal efficiency.

Fuel consumption =           ( Power )                    

                                    (heating value * thermal efficiency))

So in this case:

Fuel consumption =     (82016)

                               (44200*0.28)

                            = (82016)

                                 12276

Fuel consumption = 6.69 kg/hr

Hence, the rate of fuel consumption is 6.69 kg/hr.

Learn more about rate of fuel consumption on

https://brainly.com/question/28809733

#SPJ1

Atomic Mass = The sum of protons and neutrons in an atom. (Third option).

Atomic Number - The number of protons in an atom. (First option).

Mass Number - Exact amount of protons and neutrons (Last option).

Protons and Electrons - Charged particles of an atom (Fifth Option).

Protons and Neutrons - Particles in the Nucleus of an atom (Fourth option).

Valence Electons - Outermost particles of a shell. (Second Option).

Hope this helped!

A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V, the voltage drop across the resistor is 25.2V, the charge on the capacitor is -7.5μC, and the current through the resistor is 1.6mA.

A) Just after the circuit is completed, the voltage drop across the capacitor is 0V.

B) Just after the circuit is completed, the voltage drop across the resistor is 130V.

C) Just after the circuit is completed, the charge on the capacitor is 0C.

D) Just after the circuit is completed, the current through the resistor is 20.8mA.

E) A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V.

F) A long time after the circuit is completed (after many time constants), the voltage drop across the resistor is 25.2V.

G) A long time after the circuit is completed (after many time constants), the charge on the capacitor is -7.5μC.

H) A long time after the circuit is completed (after many time constants), the current through the resistor is 1.6mA

Just after the circuit is completed, the voltage drop across the capacitor is 0V, the voltage drop across the resistor is 130V, the charge on the capacitor is 0C, and the current through the resistor is 20.8mA. A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V, the voltage drop across the resistor is 25.2V, the charge on the capacitor is -7.5μC, and the current through the resistor is 1.6mA.

learn more about current here

brainly.com/question/17120024

#SPJ4

When two bodies at equal temperature are brought in contact with each other then no heat flows between them and they are said to be in thermal equilibrium.

When the engine temperature eventually reaches the same level as the ambient temperature, thermal equilibrium has taken place. After being placed on the table and waiting a short while, a cup of hot tea cools to the same temperature as its surroundings.

This is where thermal equilibrium occurs. the set temperature at which all of a solid's mass melts. When the solid turns into a liquid, both the solid and the liquid coexist in the thermal equilibrium.

The individual drove himself to his location. The engine temperature was excessively high during that time, but it eventually dropped to the air temperature outside. When the engine temperature eventually reaches air temperature, thermal equilibrium has occurred.

To learn more about thermal equilibrium refer to:

https://brainly.com/question/14556352

#SPJ1

A(1) and (2) only of the following bodies are at thermal equilibrium when being put into contact. i.e. (1) A glass of water of internal energy E at 20 °C (2) Alcohol with unknown internal energy at 20 °C .

As internal energy is measured in terms of the body temperature, when two bodies are in thermal equilibrium, their internal energies will also be equal.

to know more about internal energy visit

https://brainly.com/question/11278589

#SPJ1

Answer:

What is c and v

Explanation:

Answer:

96.2

Explanation:

I got it right on Acellus

Because the charges at rest are unable to produce a magnetic field, neither of the two stationary charges will do so.

There is no magnetic field created when a charge is stationary since there is no motion inside the charge. Thus, nothing except an electric field is created.

Charges that are at rest can also feel the electric force. Charges in motion can experience magnetic force. Therefore, the electric field must not be zero and the magnetic field may or may not be zero if a charged particle at rest experiences an electromagnetic force.

To know more about magnetic field, visit,

https://brainly.com/question/14411049

#SPJ4

14 a, 14 b, 14 c, and 14 d are the Expressions that require renaming mixed numbers before we can subtract.

Actually, there are a few steps to convert normal fractions into a mixed fractions. The steps are as follows:

Solving one by one with the help of the given options:

1) 14a

[tex]5\frac{2}{5}-2\frac{1}{4} \\\\\frac{17}{5} -\frac{9}{4} \\\\\frac{68-45}{20}\\\\ \frac{23}{20} =1\frac{3}{20}[/tex]

2)14b

[tex]5-2\frac{7}{8} \\\\\frac{5}{1} -\frac{7}{8} \\\\\\\frac{40-23}{8}\\\\ \frac{17}{8} =2\frac{1}{8}[/tex]

3)14c

[tex]7\frac{2}{3} -6\frac{1}{8} \\\\\frac{23}{3} -\frac{49}{8} \\\\\frac{184-147}{8} \\\\\frac{37}{24} =1\frac{13}{24}[/tex]

4)14d

[tex]9\frac{1}{6} -5\frac{2}{3}\\\\ \frac{55}{6}-\frac{17}{3}\\\\ \frac{165-102}{18} \\\\\frac{63}{18}=3\frac{9}{18}[/tex]

To know more about mixed fractions:

https://brainly.com/question/2752311

#SPJ4

Magnetic Resonance Imaging is a technique for producing precise pictures of the brain that uses radio waves and the magnetic fields of the body.

A magnetic field and radio waves produced by a computer are used in the medical imaging procedure known as magnetic resonance imaging (MRI), which produces precise pictures of your body's organs and tissues.

The noninvasive medical imaging procedure known as magnetic resonance imaging, or MRI, creates precise pictures of virtually every internal bodily structure, including the organs, bones, muscles, and blood arteries. A sizable magnet and radio waves are used in MRI scanners to produce pictures of the human body.

To know more about Magnetic Resonance visit :

brainly.com/question/20371187

#SPJ4

Answer:

The Answer is gonna be True

Explanation : A hydrogen bond is a weak type of force that forms a special type of dipole-dipole intermolecular attraction when a hydrogen atom is bonded directly to one of the most electronegative elements like nitrogen (N), oxygen (O) or fluorine (F). This causes the hydrogen to acquire a significant amount of positive charge.

Or

Hydrogen bond is an attractive force between a partially positive charged hydrogen and a partially negative charged atom (oxygen and nitrogen). This is a very weak bond and strength of hydrogen bond (5-10 Kcal per bond) is much less than the strength of covalent bond. Hydrogen bonds are usually showed as dotted lines between two atoms.

This is the Answer for your question :3

I hope you are having a great day ❤️❤️❤️❤️❤️

Answer: The attraction of opposite charges between hydrogen and oxygen does not form a weak bond because oxygen-hydrogen makes hydrogen bonding. Hydrogen bonding is a very attraction force

Answer:

Different values of Q will make different values of electric potential V (shown in the image). The electric potential arising from a point charge Q, at a distance r from the charge is observed to be where ε0 is the permittivity of vacuum. VE is known as the Coulomb potential .Explanation:

The distance from the -5.35 × 10⁻⁶ C charge where the electric potential is -500 V is approximately 0.0935 meters or 9.35 cm.

To determine the distance from a charge where the electric potential is -500 V, we can use the formula for electric potential due to a point charge:

V = k × (Q / r)

Where:

V is the electric potential (in volts),

k is the Coulomb's constant (approximately 8.99 × 10⁹ Nm²/C²),

Q is the charge (in coulombs), and

r is distance from the charge (in meters).

Rearranging the formula, we solve for the distance:

r = k × (Q / V)

Substituting the given values into the equation

k = 8.99 × 10⁹ Nm²/C²,

Q = -5.35 ×10⁻⁶ C, and

V = -500 V,

r = (8.99 × 10⁹ Nm²/C²) × (-5.35 × 10⁻⁶ C / -500 V)

Calculating this expression:

r ≈ 0.0935 meters or 9.35 cm

Therefore, the distance from the -5.35 × 10⁻⁶ C charge where the electric potential is -500 V is approximately 0.0935 meters or 9.35 cm.

To know more about electric potential here

https://brainly.com/question/31173598

#SPJ2

1.7×10^2 m

The student was 1.7×10^2 m far from the speaker.

The distance that sound waves travel is mostly influenced by the temperature and pressure of the ocean, even though sound travels through water at a far faster rate than it does through air.

The change in pressure that a sound wave causes when it is measured at a particular location is related to the amplitude of the wave. If the amplitude grows, the sound is heard as louder, and if it drops, it is heard as quieter.

The pace at which a wave moves has nothing to do with its amplitude. Waves A and B move forward at the same speed. Only changes in the characteristics of the medium a wave travels through can change its speed.

To know more about sound wave visit:

https://brainly.com/question/1749964

#SPJ4

To calculate the distance between the loudspeaker and the student, we can use the speed of sound in air, which is approximately 340 meters per second (m/s) at standard temperature and pressure (STP).

The formula to calculate distance is:

distance = speed x time

where distance is the distance between the loudspeaker and the student, speed is the speed of sound in air, and time is the delay that was observed between the time the sound wave left the loudspeaker and the time it reached the student.

distance = 340 m/s x 0.50 s

distance = 170 m

So, the distance between the loudspeaker and the student is 170 meters.

This answer corresponds to (2) 91.7 x 102m.

It's worth mentioning that sound speed can be affected by temperature, humidity, and atmospheric pressure which can cause slight variations from the standard 340 m/s at STP.

To know more about sound wave visit:

brainly.com/question/1749964

#SPJ4

A. The period of vibration is the time it takes for one complete oscillation to occur. It is the reciprocal of the frequency. The period of vibration can be calculated using the formula:

Period = 1/Frequency

Given that the frequency of vibration is 5.0Hz, the period of vibration is:

Period = 1/5.0 s

Period = 0.2 s

B. If the cart's mass is doubled while the spring constant remains unchanged, the frequency of vibration will not change. This is because frequency is dependent on the spring constant and the mass of the cart and not on the amplitude of the oscillation.

C. If the spring constant doubles while the cart's mass remains the same, the frequency of vibration will also double. This is because frequency is directly proportional to the square root of the spring constant. Therefore, doubling the spring constant would lead to an increase in the frequency of vibration by a factor of square root of 2.

Learn more about Frequency here: https://brainly.com/question/5102661

#SPJ4

Answer:

5

Explanation:

1

The minimum amplitude of the resultant pulse is 10 cm.

The amplitude of a pulse is the maximum height of the waveform measured from the baseline, also known as the peak-to-peak amplitude. In the case of two pulses, A and B, the minimum amplitude of the resultant pulse is determined by the vector sum of the individual amplitudes of the two pulses.

When two pulses are in phase, the resultant pulse amplitude is the sum of the individual amplitudes, which in this case is 20 cm + 10 cm = 30 cm.

However, if the two pulses are out of phase, the minimum amplitude of the resultant pulse is determined by the difference between the amplitudes of the two pulses. In this case, the minimum amplitude of the resultant pulse would be |20 cm - 10 cm| = 10 cm.

So, the minimum amplitude of the resultant pulse is 10 cm.

Learn more about  minimum amplitude in brainly.com/question/26033167

#SPJ1

The genetic and chemical variety of plant populations is influenced by environmental factors such as soil nutrients, temperature, water availability, and light intensity.

Sometimes a gene's DNA sequence or degree of activity is altered by the environment. Both of these effects have the capacity to change the proteins that a gene generates, which then affects traits. Some harmful environmental factors can change the nucleotide sequence of a gene. UV rays, for example, can harm DNA strands.

Successful competitors have a higher chance of surviving. Individual creatures with specific qualities are more likely to survive under specific environmental conditions than those without these traits.

To know more about natural selection visit:-

https://brainly.com/question/9830102

#SPJ4

Answer:

Much of our understanding of the basic structure and composition of Earth and the other planets in our solar system is not strenuously debated. We can infer a surprising amount of information from the size, mass and moment of inertia of the planets, all of which can be determined from routine astronomical observations. Measurements of surface chemical composition, either by direct sampling (as has been done on Earth, the moon, and Mars) or through spectroscopic observations, can be used to estimate elemental abundances and the degree of chemical differentiation that occurred as the planets condensed from the solar nebula. Remote observations of the gravitational field can be used to understand how a planet's mass is distributed, whereas the strength and shape of the magnetic field provides some constraint on the structure of a metallic core. The specifics of structure and composition, however, are much more debatable. And it is these details that tell us a much more extensive and ultimately more interesting story about the internal dynamics of the planets and their evolution. As a result, trying to determine them is frontier research in almost all fields of earth and planetary science.

Even on Earth, many of these details have to be inferred from remote observations. Because we cannot sample the deep Earth, we must deduce its composition either by looking at the clues hidden in igneous and metamorphic rocks, or by examining proxies for composition and structure such as the three-dimensional variation of the velocity of seismic waves produced by earthquakes and sampled by networks of seismometers on the surface. The late Francis Birch, the eminent Harvard geophysicist, and his colleagues and students worked out the basic methodology that brings these distinct observations together. Birch showed how the stiffness of rocks changes under the extreme conditions of pressure and temperature deep within planets, as well as with chemical composition. Because the speed of seismic waves depends on the stiffness of the medium through which they propagate, it is possible to calculate temperature and composition from maps of seismic velocity. Most current research is based on Birch's work and it has even been extended to the most extreme temperature and pressure conditions of Earth's core. For example, much of our understanding of the large- and small-scale convection patterns driving plate tectonics has come about by using Birch-type proxies for temperature and composition.

Explanation:

HOPE THIS HELPS! :)

A diver can regulate his rate of rotation and reach the water in a vertical position because his angular momentum stays constant while he is in the air. This information makes it easier for us to comprehend how this is possible.

As a result, Option D is accurate.

The rotating counterpart of linear momentum in physics is called angular momentum. Given that the total angular momentum is conserved, or remains constant in a closed system, it is an important physical quantity. By dividing the rotational inertia of an item by the angular velocity, one may get its angular momentum. The angular velocity of an item is used to calculate its rotational speed. An object's rotational inertia is what makes turning it challenging. On an ice rink or in an office, someone spinning

To know more about Angular momentum here

https://brainly.com/question/29524750

#SPJ4

According to the given information the answer is Add masses to each car until they have the same mass, then test the carts again.

Features three low friction ball bearing wheels and matched axles to assure their rolling along a true line without deviation to produce accurate data, and a sturdy steel body to endure rigorous handling. Each cart is around 1.5 kg in weight. The ends of the cart lift above the bed to transport a brick or any other bulk, and the cart bed is covered with a rubber pad. At one end of the cart, there is a clip where a tape can be fastened. Each cart's pins fit into the holes in the others, allowing the mass to be doubled by stacking them.

Learn more about Dynamic carts from given link

brainly.com/question/11066593

#SPJ4

The complete question is-

Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do?

According to the given statement The ships average acceleration is 2790 km/hr².

A measure of how quickly motion's speed and direction change over time. When a point or object advances or decelerates, it is moving straight forward. Motion on a circle increases despite the same speed because the direction is always changing.

We know that from newton's equation,

v² + u² = 2as

S = ut + 0.5 at²

Where, v = final speed

           u = initial speed

           a = acceleration

           S = distance covered

            t = time taken

Given, u = 0

So the equations becomes:

v² = 2as

S = 0.5 at²

Using these equations we get:

v² = 2a(0.5)at²

v² = a²t²

v = at

v/t = a

Given,  v = 93 km/hr

          t = 2 min = 2/60 hr

Putting these values in above equation we get, a = 2790 km/hr²

So, the ships average acceleration is 2790 km/hr²

To know more about Acceleration visit:

https://brainly.com/question/3046924

#SPJ1

Important Formulas:

[tex]KE=.5mv^2[/tex]

Kinetic energy(measured in joules) = .5 * mass(measured in kg) * velocity(measured in m/s)^2

__________________________________________________________

Given:

[tex]m=20kg[/tex]

[tex]v=3m/s[/tex]

[tex]KE=?[/tex]

__________________________________________________________

Finding kinetic energy:

[tex]KE=.5mv^2[/tex]

[tex]KE=.5(20)(3)^2[/tex]

__________________________________________________________

[tex]\fbox{KE = 90 Joules}[/tex]

The proposed size of 10 miles long and 5 miles in diameter for such a colony is quite large and would require significant technological advancements in terms of materials, and construction to be feasible.

In general, a spinning cylinder produces lift when its top and bottom are subjected to higher pressure and quicker velocities, respectively. The lifting force, it was said, is pointed perpendicular to the cylinder velocity.

If r is an object's radius, v is its linear speed and is its angular velocity in radians per unit of time, then v = r. This formula connects these three values so that we can always determine the third if we know the first two.

to know more about rotating cylinders here:

brainly.com/question/13692334

#SPJ4

The velocity of the object is 7.74m/s

Though it may sound sophisticated, velocity is simply the rate at which an object's location changes with regard to a frame of reference and time. Since it is a vector quantity, the definition of velocity requires both magnitude (speed) and direction.

We are given that,

Acceleration = 12m/s²

Radius = r = 5.0m

Velocity = v = ?

The velocity of the object can be calculated by the formula ,

a = v²/r

v = √ar

v = √12m/s²× 5m

v = √60m²/s²

v= 7.74m/s

Thus , the velocity of the object would be 7.74m/s.

To know more about velocity

https://brainly.com/question/29886789

#SPJ4

When 13.7-N force is being applied to the block parallel to the surface it will remain at rest, and the force of friction will be about 13.7 N. Hence option B is correct.

The resistive force of friction (Fr), which pushes the items together, is divided by the normal or perpendicular force (N), which pushes them apart, to produce the coefficient of friction (fr), which is a numerical value. The following formula represents it: fr = Fr/N.

Force which prevents one solid object from rolling or slipping over another. Although frictional forces can be advantageous, such as the traction required to walk without slipping, they also provide a significant amount of resistance to motion.

To know more about frictional force visit :-

brainly.com/question/14662717

#SPJ4

Answer:

A hypothesis. In science, a hypothesis is an idea or explanation that you then test through study and experimentation. Outside science, a theory or guess can also be called a hypothesis. A hypothesis is something more than a wild guess but less than a well-established theory. My hypothesis was right because although it was n educated guess it was still correct

The viscosity value decreased with the increase of temperature. The effect caused by temperature in the range studied was more important in the low range of temperature, whereas at high temperature, the viscosity showed less variation.The studies carried out in the present work indicated that the effect of temperature upon the viscosity of Galician honeys was prominent, and it is necessary to take into account this variable when the operation temperature is under 25°C, since below this value a small variation in temperature produces high changes in the viscosity value. On the other hand, different models to fit experimental values of viscosity/temperature have been proved. The glass transition temperature was determined necessarily since several models include this parameter in the equation, because it provides important information related to the viscosity value. All the models show a good behaviour but the best results were obtained using the Arrhenius one.

Based on the information provided, it is unclear what hypothesis was being tested in this experiment. however, I can explain about hypothesis, and The experiment demonstrates a decomposition reaction in which heating a mixture of sugar and baking soda produces carbon, and the principles of this reaction can be observed in real-life scenarios such as burning wood and digestion.

A hypothesis is a proposed explanation or prediction for a phenomenon or observed data that is based on prior knowledge, assumptions, and logical reasoning. It is an educated guess that can be tested through scientific investigation and experimentation. A hypothesis is usually formulated as a statement or a question that predicts the outcome of an experiment or study. The validity of a hypothesis is evaluated through empirical evidence, which may either support or refute the proposed explanation or prediction.

Hypotheses are an essential component of the scientific method, which involves formulating a hypothesis, testing it through experiments or observations, analyzing the data, and drawing conclusions based on the evidence. A hypothesis can be modified or revised based on the results of the experiments, and further investigations can be conducted to refine and validate the proposed explanation or prediction.

Here in the experiment,

The experiment involved mixing 9 sugar cubes and 2 teaspoons of baking soda, then heating it to make a long black tube of carbon. The sugar cubes had a mass of 2 grams each, and the teaspoon could hold 3 grams of baking soda. The total mass of the reactants used in the experiment was found to be 24 grams.

From this experiment, we can conclude that the reaction between sugar and baking soda can result in the formation of carbon. Heating the mixture causes a chemical reaction, which breaks down the sugar and baking soda into carbon, water vapor, and other byproducts. This reaction is an example of a decomposition reaction, in which a single compound breaks down into two or more simpler substances.

The principles demonstrated in this experiment are evident in many real-life scenarios. For example, the process of burning wood can be seen as a type of decomposition reaction. When wood is burned, it reacts with oxygen in the air to produce carbon dioxide, water vapor, and other byproducts. Similarly, the process of digestion in the human body involves the breakdown of complex food molecules into simpler substances that can be absorbed by the body.

Therefore, this experiment demonstrates the principles of a decomposition reaction and shows how sugar and baking soda can be transformed into carbon through heating. By understanding the underlying chemistry of such reactions, we can gain insights into many real-life processes and phenomena.

To learn more about redox reaction click:

brainly.com/question/2671074

#SPJ2

The total distance that the truck travels is 11.7 km

Part (a)

The algebraic sum of the various distances results in the total distance covered by the trucks.

DT = d1 + d2 + d3

So, total distance that the truck travels = 1.4 + 7.7 + 2.6 = 11.7 km

Part (b) Question is missing :

(b) What are the magnitude (in km) and direction of the truck's displacement? (Enter a number.)

magnitude   #?   km

direction? east, west or neither.

The quickest route taken by the object to get from one spot to another is called displacement.

As the truck travels in three directions, from east to west to east, it begins out from the east. Think of the east as being good and the west as being negative. As a result, the displacement can be calculated as shown below.

D =d1 - d2 + d3 = 1.4 - 7.7 + 2.6 = 1.4 - 5.1 = -3.7 km

Here, the negative sign shows that the truck has displaced in the west direction.

Learn more about displacement here :

brainly.com/question/11934397

#SPJ4

Machines and equipment use a variety of energy sources, including electrical, mechanical, hydraulic, pneumatic, chemical, thermal, and others.

Equipment and machinery that draw power from electrical, mechanical, hydraulic, pneumatic, chemical, thermal, or other sources may put workers at risk.

hazards to safety

biological threats

bodily dangers

hazards of ergonomics

chemistry risks

threats to organisations during work.

environment-related risks.

Potential energy, or stored energy in an object, poses a risk to employees if it is suddenly released.

Lockout is only one aspect of hazardous energy control. It includes measures like machine guarding, alternative guarding arrangements that stop exposure to hazardous energy, lockouts, and other ways to protect workers from coming into touch with such energy. Anything that could be harmful, hurt someone, or have negative health impacts on something or someone is said to be in a hazardous condition.

To learn more about energy refer to:

https://brainly.com/question/1932868

#SPJ4

Answer:

I believe the answer is triangle

Hope it helps!

Answer:

Oceanic crust moves easly. Continental crust does not move

Answer:

The answer is 39.3

Explanation: