The temperature of 17.0 L of carbon dioxide is lowered from 38°c to 5°c. What is the final volume?

a. The hydrolysis of taxiphyllin in bamboo shoots liberates toxic cyanide (-CN) and a sugar molecule. The arrow-pushing mechanism for this reaction can be represented as follows:

-Taxiphyllin + H₂O → HCN + Sugar

First, water (H₂O) acts as a nucleophile and attacks the glycosidic bond of taxiphyllin, which leads to the formation of an intermediate complex with a hydroxyl group (-OH) attached to the anomeric carbon. Then, the intermediate complex undergoes intramolecular rearrangement to form an oxocarbenium ion. Finally, a proton transfer occurs between the oxocarbenium ion and the water molecule to produce HCN and a sugar molecule.

b. The driving force for the hydrolysis of taxiphyllin is the stability of the products compared to the reactants. Taxiphyllin is a cyanogenic glycoside that is relatively stable under normal conditions. However, in the presence of water, the glycosidic bond in taxiphyllin undergoes hydrolysis to form HCN and a sugar molecule. The release of HCN is energetically favorable because HCN is a more stable molecule than taxiphyllin. The hydrolysis reaction also releases energy, which further drives the reaction forward. Additionally, the toxicity of HCN makes it a potent poison, which can cause respiratory failure and death at high enough concentrations. Therefore, the driving force for the hydrolysis of taxiphyllin is the formation of more stable and toxic products compared to the reactants.

To learn more about cyanide refer to:

brainly.com/question/10108557

#SPJ4

Answer:

it is 56 approximately

Explanation:

the law is mass/molar mass = no. of moles

you have one mole of iron and the molar mass is 56 approximately

then the equation is

mass/56= 1

then this will be 56 grams

Answer:

Liquids

Liquids have the following characteristics: No definite shape (takes the shape of its container). Has definite volume.

Answer:

Br2 + H2S => 2HBr + S

Explanation:

Br2 + H2S => 2HBr + S

Br = 2

H = 2

S = 1

The large peak at the very beginning of the GC spectrum during the analysis of the product from dehydrobromination of 2-bromobutane is likely due to the presence of the solvent used for the extraction of the product.

During the extraction process, it is common to use a polar solvent, such as diethyl ether or ethyl acetate, which can dissolve the desired compound (in this case, an alkene) and separate it from the byproducts and impurities.

However, some of the polar solvent used in the extraction process may carry over to the GC column and be detected as a large peak at the beginning of the GC spectrum. This peak is often referred to as the solvent peak and can interfere with the analysis of the desired compound, making it difficult to accurately determine its concentration.

To minimize the impact of the solvent peak on the analysis, it is important to use a solvent that is significantly more soluble in one phase than the other. This is achieved by choosing solvents that have significantly different polarities or by using solvents that are more basic than the desired compound. The difference in solubility between the two phases allows for effective separation and minimizes the carry-over of the solvent into the GC column, reducing the interference of the solvent peak in the analysis of the desired compound.

To learn more about dehydrobromination refer to:

brainly.com/question/29762724

#SPJ4

The optimal conditions for specimen transport, handling, and storage of specimens for clinical chemistry testing are as follows: Transport: Specimens must be transported promptly to the laboratory to minimize changes in composition and to ensure proper analysis. The ideal transportation temperature is between 2 and 8°C.

Chemical analyses should be completed within 24 hours after collection to ensure the quality of the specimen. Handling: Laboratory personnel must take precautions to avoid contamination and errors during handling. Gloves should be worn when handling blood or other potentially hazardous specimens. Storage: After collection, specimens must be appropriately labeled with the patient's name and other identifying information. Specimens should be kept at the appropriate temperature, which is usually between 2 and 8°C for most tests. If the test requires a different temperature range, the specimen should be kept at the appropriate temperature until testing is complete. The specimens must be kept secure, protected from light, and free from vibration, moisture, and heat. In summary, it is crucial to adhere to the optimal conditions for specimen transport, handling, and storage of specimens for clinical chemistry testing. It ensures that the analysis is accurate and reliable, and errors or contamination are avoided.

for more such questions on  temperature .

https://brainly.com/question/30074492

#SPJ11

(i) The equation for the dissociation of AgCl(x) in water is AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)

(ii) The solubility, in mol L⁻¹, of AgCl(x) in water at 10°C is 6.2 × 10⁻⁶ M.

(iii) The value of the solubility-product constant, K N, for AgCl (s) at 10°C is 3.8 × 10⁻¹¹.

The expression for the solubility of a sparingly soluble salt in water is Ksp = [salt] * [water], where Ksp is the solubility product constant, [salt] is the molar solubility of the salt, and [water] is the molar concentration of the water.

Ksp = [Ag⁺][Cl⁻]

At equilibrium, the solubility of AgCl is s mol/L. Thus, [Ag⁺] = s, [Cl⁻] = s, and Ksp = s². At 10 °C, the solubility of AgCl is 8.9 × 10⁻⁵ g in 100 mL of water. This can be converted to mol/L:

8.9 × 10⁻⁵ g AgCl / 143.32 g/mol AgCl = 6.2 × 10⁻⁷ mol AgCl

100 mL = 0.1 L

Thus, the solubility of AgCl is 6.2 × 10⁻⁶ M.

The solubility product constant can be calculated as:

Ksp = s² = (6.2 × 10⁻⁶)² = 3.8 × 10⁻¹¹

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ11

Answer:

peralkaline trachyte.

Explanation:

The Breadknife was part of a large shield volcano, that first erupted about 17 million years ago and stopped about 13 million years ago. It is composed of peralkaline trachyte.

Option C. thermal energy. The portion of the total internal energy of a system that is proportional to its absolute temperature is called thermal energy.

It is a form of internal energy that arises due to the motion of particles within a system, and it increases with increasing temperature. Thermal energy is directly proportional to the absolute temperature of a system, which is measured in kelvin (K). This relationship is described by the equation Q = mcΔT, where Q is the amount of heat added, m is the mass of the system, c is the specific heat capacity, and ΔT is the change in temperature. Therefore, thermal energy is an important concept in thermodynamics and plays a crucial role in many physical processes.

Learn more about thermal energy here; brainly.com/question/18989562

#SPJ4

The correct option is: 2 - It lowers the energy barrier needed for reactants to achieve the transition state or lowers the energy of activation of a reaction.

An enzyme works to catalyze a reaction by lowering the energy barrier needed for reactants to achieve the transition state, or lowering the activation energy of a reaction.Enzymes are specific to particular chemical reactions, meaning that they can only catalyze certain reactions.

The enzyme catalyze a reaction in this way-

An enzyme is a type of protein that works as a biological catalyst to speed up chemical reactions in the body. It works by lowering the activation energy needed for reactants to achieve the transition state, which increases the likelihood of a reaction happening. This allows reactions to occur faster and more efficiently than they would otherwise.

Learn more about enzyme's active site and transition state :https://brainly.com/question/15997027

#SPJ11

Answer:

It poses a negative effect on aquatic life

Explanation:

That is it can lead to a shift in species composition to fast growing algae species in water and a shift from long macro algae to more nuisance species

The reagent that could be added that would allow you to differentiate between the members of each pair of solid compounds below is the Sodium Thiosulfate (Na2S2O3) reagent.

Let's take a look at the process: Na2S2O3 can be used to distinguish between HgCl2 and Hg2Cl2. They react differently with Na2S2O3 due to the fact that they have different stabilities as mercuric and mercurous compounds. In the presence of HgCl2, Na2S2O3 quickly precipitates yellow-colored Hg2Cl2, which can be readily detected.

The balanced equation for this reaction is as follows:

HgCl2 (s) + Na2S2O3 (aq) → Hg2Cl2 (s) + NaCl (aq) + Na2S2O4 (aq)

Therefore, when Na2S2O3 reagent is added to HgCl2 and Hg2Cl2, Hg2Cl2 precipitates as a yellow-colored precipitate while HgCl2 does not form any precipitate.

To know more about reagent refer here:

https://brainly.com/question/29737349#

#SPJ11

We see that the RMSD is much smaller than the bond length. This is expected, as the nuclei of the atoms in a molecule oscillate around their equilibrium positions with small amplitudes, even at room temperature.

The root-mean-square displacement (RMSD) of the nuclei in a molecule is given by the following formula:

RMSD = √(3RT/2k)

where R is the gas constant, T is the temperature in Kelvin, and k is the force constant of the bond in N/m.

The force constant of the bond in C₁₂O₁₆ can be calculated using the equilibrium bond length (r_e) and the reduced mass (mu) of the molecule:

k = mu x (2pi x c)² / (r_e)²

where c is the speed of light.

The reduced mass (mu) of C₁₂O₁₆ is:

mu = m_C x m_O / (m_C + m_O)

where m_C and m_O are the masses of carbon and oxygen, respectively. From the periodic table, we have:

m_C = 12.01 g/mol

m_O = 16.00 g/mol

Therefore:

mu = 12.01 g/mol x 16.00 g/mol / (12.01 g/mol + 16.00 g/mol) = 6.646 g/mol

The force constant of the bond can be calculated using the equation:

k = mu x (2pi x c)² / (r_e)²

where c is the speed of light:

c = 2.998 x 10⁸ m/s

Substituting the values, we get:

k = 6.646 g/mol x (2pi x 2.998 x 10⁸ m/s)² / (112.832 pm)²

k = 1.939 x 10³ N/m

Assuming the temperature is room temperature (298 K), the RMSD of the nuclei is:

RMSD = √(3RT/2k) = √(3 x 8.314 J/mol K x 298 K / (2 x 1.939 x 10³ N/m))

RMSD = 6.02 x 10⁻¹² m

Comparing the RMSD with the equilibrium bond length

(112.832 pm = 1.12832 x 10⁻¹⁰ m), we see that the RMSD is much smaller than the bond length. This is expected, as the nuclei of the atoms in a molecule oscillate around their equilibrium positions with small amplitudes, even at room temperature.

Learn more about equilibrium on:

https://brainly.com/question/517289

#SPJ11

The compound's empirical formula is CH₃, which stands for one carbon atom and three hydrogen atoms.

A compound is a material that is created chemically by combining two or more separate elements in a specific order. Chemical bonds, which may be ionic or covalent in nature, are what hold the constituent parts of a compound together. Many chemical processes, such as synthesis (combining of elements), decomposition (dissolving a compound into its component elements), and exchange, can result in the formation of compounds (replacement of one element in a compound by another).

Assuming that there are 4 carbon atoms and 12 hydrogen atoms, we can calculate the carbon to hydrogen ratio as follows:

By dividing both sides by 4, the ratio of carbon atoms to hydrogen atoms, which is 4:12, can be reduced to 1:3.

This indicates that the chemical has three hydrogen atoms for every one carbon atom.

As a result, the compound's empirical formula is CH₃, which stands for one carbon atom and three hydrogen atoms.

To know more about compound, visit:

brainly.com/question/13516179

#SPJ1

Explanation:

La dinámica demográfica es la principal fuerza conductora del cambio ambiental global, pues constituye una presión para ocupar cada vez más espacios, explotar más recursos, producir más alimentos, consumir más agua, contaminar más, utilizar más energía y emitir más gases de efecto invernadero

We can begin by completing the appropriate algebraic operations to isolate x on one side of the equation before trying to identify it.

20 = 80(.5)^8.32/x

Put 80 on both sides:

20/80 = (.5)^8.32/x

Make the left side simpler:

1/4 = (.5)^8.32/x

Take both sides' reciprocal:

4 = x/(.5)^8.32

Make the right side simpler:

4 = x/0.0027067

Divide the two sides by 0.0027067:

x = 0.0027067 * 4

x = 0.0108268

Hence, x is almost equal to 0.0108268.

Your response is in scientific notation since 5.94 is at least 1 but less than 10. (3.4 10 3) + (5.6 10 4) = 5.94 10 4 is the solution.

To know more about scientific notation  visit:-

brainly.com/question/18073768

#SPJ9

Valence electrons in Nitrogen is 5, Silicon is 4 and Chlorine is 7; Core electrons in Nitrogen is 2 Silicon is 8 and Chlorine is 10; Unpaired electron in the ground state of Nitrogen is 1, Silicon is 0 and Chlorine is 1.

a. Nitrogen - The outermost shell of nitrogen consists of 2s2 2p3 electrons, of which the 2s2 electrons form the core electrons and the 2p3 electrons form the valence electrons. Since there are an odd number of electrons, one of the 2p electrons will be unpaired.

b. Silicon - The outermost shell of silicon consists of 3s2 3p2 electrons, of which the 3s2 electrons form the core electrons and the 3p2 electrons form the valence electrons. Since there are an even number of electrons, all of the 3p electrons will be paired.

c. Chlorine - The outermost shell of chlorine consists of 3s2 3p5 electrons, of which the 3s2 electrons form the core electrons and the 3p5 electrons form the valence electrons. Since there are an odd number of electrons, one of the 3p electrons will be unpaired.

To learn more about electrons click here https://brainly.com/question/28977387

#SPJ1

The molecular weight of benzyl-triphenylphosphonium chloride is 388.87.

Benzyltriphenylphosphonium chloride (BTPPCl) is a quaternary ammonium salt that has three phenyl groups and one benzyl group attached to a central phosphorus atom.

Quaternary ammonium salts are organic compounds that have a central nitrogen atom that is bonded to four organic groups. They are commonly known as quats, and they are widely used as disinfectants, surfactants, and catalysts in the pharmaceutical, cosmetic, and food industries.

Benzyl is an organic compound that contains a phenyl group (C6H5) that is attached to a methyl group (CH2). It is commonly used as a solvent and as a starting material for the synthesis of other organic compounds

Phosphonium is an ion with a central phosphorus atom that is bonded to four organic groups. It is the phosphorus analog of ammonium (NH4+). Phosphonium salts are usually obtained by the reaction of phosphines with alkyl or aryl halides. They are used as precursors for the synthesis of organophosphorus compounds, such as phosphine ligands, catalysts, and reagents.

Learn more about Benzyltriphenylphosphonium chloride at https://brainly.com/question/15058733

#SPJ11

The type of functional group formed when aspartic acid reacts with another amino acid to form a peptide bond is a carboxyl group.

What is an amino acid?

Amino acids are biomolecules that are the building blocks of proteins, which are fundamental molecules in living organisms that execute a variety of biological functions.

An amino acid has an amine (-NH₂) and a carboxyl (-COOH) functional group linked to a central carbon atom. The R-group, also known as the side chain, varies based on the type of amino acid. The R-group may be anything from a simple hydrogen atom to a complex ring structure.Functional group in aspartic acidAmino acids, such as aspartic acid, have an -NH₂ group attached to the alpha-carbon and an -OH (hydroxyl) group attached to the carboxyl group (also called the acid group).

A functional group is a collection of atoms or groups of atoms in a molecule that gives it characteristic properties. The -OH group is referred to as the carboxyl group since it contributes to the acidity of the molecule in the case of aspartic acid.The peptide bond between two amino acids is formed when the carboxyl group of one amino acid reacts with the amino group (-NH₂) of another amino acid.

The removal of water from the two amino acids results in the formation of a covalent bond known as a peptide bond. This process is known as dehydration synthesis. When aspartic acid reacts with another amino acid to form a peptide bond, the carboxyl group of aspartic acid acts as the donor, while the amino group of the other amino acid acts as the acceptor.

As a result, a carboxyl group is formed when aspartic acid reacts with another amino acid to form a peptide bond.

Learn more about functional group on:

https://brainly.com/question/10058230

#SPJ11

The noble gas whose name comes from the Greek for the strange is called xenon.

The Xenon comes from the Greek word that is Xenos, which means that the strange or the unusual. The another reason is that the Xenon belongs to noble gas group, the elements of which it do not react with the anything to form the compounds.

This unique property of the Xenon makes it the peculiar and this is the reason is why it will behaves in the different manner. Therefore, this is the reason that is why it is known as the stranger gas. The symbol of the xenon gas is Xe.

To learn more about noble gas here

https://brainly.com/question/3478394

#SPJ4

An ion of -2 charge is found in the elements of group 16 (VI A) of the periodic table. This group is also known as the chalcogens or oxygen family.

What are ions? An ion is an atom or molecule that carries an electrical charge resulting from the loss or gain of one or more electrons. A positively charged ion is known as a cation, and a negatively charged ion is known as an anion. The ions that have a positive charge are formed when an atom loses an electron, whereas ions that have a negative charge are formed when an atom gains electrons.

Group 16 of the periodic table: Group 16 of the periodic table is also called the chalcogens or the oxygen family. It contains the elements O, S, Se, Te, and Po. These elements have six valence electrons in their outermost shell, and their electronic configuration is ns²np⁴, where n is the principal quantum number. These elements usually react with metals to form oxides, and with nonmetals to form polyatomic compounds. Charge of -2:An element with an ion charge of -2 will gain two electrons to achieve a stable electronic configuration. Since group 16 elements have six valence electrons, they only need two more to achieve a stable octet configuration. Therefore, the elements in group 16 can form an anion with a charge of -2.

Learn more about group in periodic table at: brainly.com/question/14322480

#SPJ11

Among the given reactions of alkenes, the reaction of addition of HBr (treatment with HBr) to an alkene is stereo-specific.

What is stereo-specific?

Stereo-specificity is a chemical concept that describes a reaction's capability to differentiate between stereo-isomers. A stereo-specific reaction is one in which only one stereo-isomer is generated from a given stereo-isomeric reactant. The stereo-chemistry of the reactant, the product, or both is generally associated with stereo-specificity. Stereo-specific reactions are also referred to as stereo-selective reactions.

When an alkene reacts with HBr in the presence of a peroxide initiator, the hydrogen (H) and the bromine (Br) atoms add to the carbon atoms of the double bond in a syn addition. This means that the hydrogen and the bromine atoms are added to the same side of the double bond, resulting in the formation of a single product with a specific stereo-chemistry.

Therefore, the reaction of addition of HBr to an alkene is stereo-specific, because the stereo-chemistry of the product is determined by the syn addition of the hydrogen and the bromine atoms to the double bond. The other reactions listed are not stereo-specific.

Learn more about stereo-specificity on:

https://brainly.com/question/22811170

#SPJ11

The part of the enzyme molecule into which the substrate fits is called the active site. The active site is a specific region on the surface of an enzyme to which the substrate binds and chemically reacts.

The substrate is a molecule that fits perfectly into the active site of an enzyme, and the chemical reaction can only occur in the presence of the appropriate enzyme and substrate. The substrate is the molecule that binds to the active site on an enzyme to catalyze a chemical reaction. The active site is the specific area on the surface of the enzyme to which the substrate binds to form an enzyme-substrate complex. The enzyme's active site and the substrate's chemical structure must be complementary for the enzyme to catalyze the reaction effectively.

Learn more about the active site: https://brainly.com/question/1831627

#SPJ11

The reaction that does not occur in a beaker is;

- CH4(g) + 2O2(g) → CO2(g) + 2H2O(ℓ) + 213 kcal

In a beaker, it is unlikely that all of these conditions will be met for a combustion reaction to occur. For example, there may not be enough fuel present in the beaker to sustain a combustion reaction, or there may not be enough oxygen to support the reaction.

Additionally, an ignition source such as a spark or flame is usually necessary to initiate the reaction, which is unlikely to be present in a beaker.

Learn more about combustion:https://brainly.com/question/15117038

#SPJ1

3.16 µg of Polonium 210 is needed as LD50 for the victim.

The Lethal dose 50 (LD50) of Polonium is 0.045 micrograms (µg) per kilogram (kg) of body weight. The average weight of an adult is 70 kg.

LD50 dose of Polonium = 0.045 µg/kg × 70 kg = 3.15 µg

Assuming the Polonium isotope has a purity of 100%, the atomic mass of Polonium (Po) 210 is 210,

the molar mass of Polonium is:

Molar mass (Po) = 210 g/mol

Moles of Polonium = LD50 dose / molar mass = 3.15 × 10-6 g / 210 g/mol = 1.5 × 10-8 mol

The mass of Polonium needed to deliver an LD50 dose to the victim is:

Mass of Polonium = Moles × Molar mass = 1.51 × 10-8 mol × 210 g/mol = 3.16 × 10-6 g = 3.16 µg

Therefore, 3.16 µg of Polonium is needed to deliver an LD50 dose to the victim.

Note: The mass is given in micrograms, not milligrams or grams. Therefore, the answer should also be in micrograms.

To learn more about polonium decay : https://brainly.com/question/16979893

#SPJ11

For a voltaic cell DeltaG < 0. For an electrolytic cell DeltaG > 0. Work is done on the system in an electrolytic cell. The system does not work on the surroundings in a voltaic cell.

Voltаic cell is аn electrochemicаl cell thаt chаnges chemicаl energy to electricаl energy by the trаnsfer of electrons. In а voltаic cell, the drop zone is empty.

The electrolytic cell is аn electrochemicаl cell thаt uses electricаl energy to trigger а non-spontаneous redox reаction. In аn electrolytic cells, the drop zone is empty.

Work is done on the system in аn electrolytic cells. In аn electrolytic cell, the externаl energy source or bаttery drives the non-spontаneous reаction, which cаuses work to be done on the system. The system does work on the surroundings in а voltаic cell. In а voltаic cell, the spontаneous redox reаction releаses energy, аnd work is done on the surroundings by the system.

Your question seems incomplete. I could not find the exact question detail online, so I generally answered based on the keywords.

For more information about voltaic and electrolytic cell refers to the link: https://brainly.com/question/1370699

#SPJ11

The compound that will undergo a faster hydrolysis reaction by the SN1 mechanism is [tex]CH_{3} CH_{2}CH_{2}Cl[/tex] (option B).

SN1 is a kind of nucleophilic substitution reaction that is unimolecular, which means that the reaction's rate is only dependent on the concentration of a single molecule, the reactant. A unimolecular reaction is one in which the rate-determining step is the dissociation of a single molecule. SN1 reactions are unimolecular in nature and proceed in two steps. In the first step, the substrate undergoes heterolysis to form a carbocation and a halide ion. In the second step, the carbocation is attacked by a nucleophile, which can be either neutral or negatively charged.

SN1 mechanism reactions occur when a polar protic solvent is used, which means that the solvent must be able to stabilize the carbocation intermediate that is formed during the reaction. This is the case when the solvent is water, which is polar protic. In comparison to  [tex]CH_{3} CH_{2}CH_{2}Cl[/tex],  [tex]CH_{2}Cl[/tex] will undergo a faster hydrolysis reaction by SN1 mechanism.

To learn more about SN1 reaction, click here: https://brainly.com/question/29558712

#SPJ11

The important assumption made in the alloy part to determine the composition of the Al-Zn alloy is that the two elements are present in the alloy in their atomic form.

An alloy is a combination of two or more metals, or a metal and a non-metal. This means that an alloy is a mixture of two or more elements, at least one of which is a metal, that has metallurgical properties. An alloy is distinguished from a pure metal by its physical and chemical properties.

Aluminum-Zinc alloys, also known as Zincalume or Galvalume, are primarily made up of aluminum and zinc. The aluminum makes up about 55 percent of the alloy by weight, while the remaining 45 percent is made up of zinc. The alloy's composition will determine its mechanical, physical, and chemical properties. Zinc improves the alloy's strength and resistance to corrosion.The important assumption made in the alloy part to determine the composition of the Al-Zn alloy is that the two elements are present in the alloy in their atomic form.

To learn more about "alloy", visit: https://brainly.com/question/1759694

#SPJ11