The percent yield for the reaction in this example is 100%, which is equal to the theoretical yield of NaBr from 2.36 mol FeBr3 of 7.08 mol NaBr.
What is NaBr's theoretical yield?The lesser amount, or 13.7 g NaBr, represents the potential yield. 15.45 grams of NaBr can never be produced because after 13.7 grams of NaBr are created, the reaction runs out of NaI and stops generating NaBr product. As the limiting reactant, NaI is well-known.
How is % yield determined?The final answer is expressed in percent by dividing the experimental yield by the theoretical yield and multiplying the result by 100. In general, the percent yield value is less than 100%,
To know more about theoretical yield visit:-
https://brainly.com/question/14966377
#SPJ1
Answer: 87%.
Explanation:
The hybridization of orbitals on the central atom in a molecule is sp. The electron-domain geometry around this central atom is ________.
A molecule's core atom experiences sp orbital hybridization. Around this primary atom, the geometry of the electron domain is linear.
In chemistry, hybridization is the idea of combining two atomic orbitals to create a new class of hybridized orbitals. Usually, this mixing creates hybrid orbitals with completely distinct energies, forms, etc. In hybridization, the same energy-level atomic orbitals are primarily involved. However, assuming they contain equal energy, both fully-filled and half-filled orbitals can participate in this process.
When two atomic orbitals unite to generate a hybrid orbital in a molecule, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name given to this process. Atomic orbitals with similar points are brought together during the hybridization process.
Learn more about hybridization here:
https://brainly.com/question/29591951
#SPJ4
1. Explain why during splitting of water not equal volume of oxygen and hydrogen gases were produced?
Answer:
because it has love with
how many carbon atoms are in 2.12 mol of propane. how many hydrogen atoms are in 2.12 mol of propane
There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.
What is carbon?
Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.
To learn more about carbon
https://brainly.com/question/26150306
#SPJ4
What type of chemical reaction is this one?
C2H2 + O2 --> CO2 + H2O
Answer:
unbalanced
Explanation:
as the atoms on the one side do not equal to the atoms on the other sides
The volume of a sample of oxygen is 300.0 mL when the pressure is 1.00 atm and the temperature is 27.0°C. At what temperature is the volume 1.00 L and the pressure 0.500 atm?
Why do the electrons stay in between the nuclei of the two hydrogen atoms chemthink
Electrons stay in between the nuclei of the two hydrogen atoms because they are attracted to the positive charge of the nuclei.
Electrons are negatively charged species, so they are attracted towards the positive charge of a nucleus.
In hydrogen atom, when both the two hydrogen atoms get close to each other then the electrons of each atom will get attracted to both the nuclei. And if both the hydrogen atoms come close to each other they will repel each other.
The energy of the two hydrogen atoms becomes less when they are together than when they are far apart.
Thus, the electrons tend to stay in between the nuclei of the two hydrogen atoms.
To know more about nuclei of two hydrogen atoms here
https://brainly.com/question/13570570
#SPJ4
Can anyone help me with this formula?
Answer:
[1] P4 + [3] O2=[2] P2O3
Explanation:
you can first solve for amount of O2 in the equation because reactant had O2 and product had O3, so the amount of O2 should be 3 and amount of O3 should be 2, which gets u to 6 moles of oxygen for both reactant and product. then you can balance the P4, and 1 mols of P4 = 2 moles of P2, which matches with the amount of mols for O3 as well. therefore you can get P4 + 3O2 = 2P2O3
Pure oxygen boils at -183 ℃ and freezes at -219 ℃. What state will the oxygen be in if the temperature is brought to within 35 K of absolute zero?
Answer:
Solid.
Explanation:
Hello there!
In this case, according to the given description of the freezing and boiling point of oxygen, it turns out possible for us to figure out the phase of oxygen at 35 K by just subtracting 273:
[tex]35-273=-238\°C[/tex]
In such a way, since this temperature is lower than its freezing point of -219 °C, we infer that such sample will be solid.
Regards!
How do temperature differences in the layers of Earth move magma?
A.Cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.
B.Cooling magma becomes less dense and sinks, while hotter magma near the core is more dense and rises, moving magma in a cyclic path.
C.Cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a linear path.
D.Cooling magma becomes less dense and sinks, while hotter magma near the core is more dense and rises, moving magma in a linear path.
Answer: A
Explanation:
Cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.
This answer was obtained from a credible source after doing some research.
The temperature differences in the layers of Earth move magma as cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.
What is magma?Magma is the molten or semi-molten natural material from which all igneous rocks are formed.Magma is found beneath the surface of the Earth, and evidence of magmatism has also been discovered on other terrestrial planets and some natural satellites.Besides molten rock, magma may also contain suspended crystals and gas bubbles.
Magma is produced by melting of the mantle or the crust in various tectonic settings, which on Earth include subduction zones, continental rift zones,mid-ocean ridges and hotspots. Mantle and crustal melts migrate upwards through the crust where they are thought to be stored in magma chambers or trans-crustal crystal-rich mush zones. During magma's storage in the crust, its composition may be modified by fractional crystallization, contamination with crustal melts, magma mixing, and degassing.
Learn more about magma,here:
https://brainly.com/question/16940653
#SPJ2
What do your results tell you about the directing effects of the substituents on salicylamide?
The amide group in salicylamide is electron withdrawing, the hydroxyl group on the ring is a highly active, electron donating substituent. The hydroxyl group donates electrons, guided entry iodide to a para position.
What does the word "substituent" signify in chemistry?A substituent is an atom that are substituted for an atom here on parent chain of such a hydrocarbon in both chemistry and biochemistry constituting a moiety of the resulting new molecule.
Alkyl groups: are they substituents?Alkyl groups are substitutes created from alkanes. The names of alkyl groups and unbranched alkane chains are similar. Alkyl groups may branch as well. For instance, the butyl substituent has three constitutional isomers.
To know more about Substituent visit :
https://brainly.com/question/14970034
#SPJ4
How many moles are there in 9.115 grams of HCI?
I do not know, i just need points :/
This is your assignment: How much energy would it take to
change 15 grams of ice at -5 °C to steam at 110 °C?
Its five steps please show work
Answer:
45594J
Explanation:
Needed information in this question are;
Specific heat of ice = 2.06 J/g°C
Specific heat of water = 4.18 J/g°C
Specific heat of steam = 2.03 J/g°C
Heat of fusion of water ΔHf = 334 J/g
Melting point of water = 0 °C
Heat of vaporization of water ΔHv = 2257 J/g
Boiling point of water = 100 °C
- STEP 1:
Q1 = mcΔT
where
m = 15 grams
c (specific heat of ice) = 2.06 J/g°C
Tinitial = -5 °C
Tfinal = 0 °C
ΔT = (Tfinal – Tinitial)
ΔT = (0 °C - (-5 °C))
ΔT = 5 °C
Q1 = mcΔT
Q1 = (15 g) · (2.06 J/g°C) · (5 °C)
Q1 = 154.5 J
- STEP 2:
Q2 = m · ΔHf
where
m = 15 grams
ΔHf (heat of fusion) = 334 J/g
Q2 = m · ΔHf
Q2 = 15 · 334 J/g
Q2 = 5010 J
- STEP 3:
Q3 = mcΔT
where
m = 200 grams
c (specific heat of water) = 4.18 J/g°C
Tinitial = 0 °C
Tfinal = 100 °C
ΔT = (Tfinal – Tinitial)
ΔT = (100 °C – 0 °C)
ΔT = 100 °C
Q3 = mcΔT
Q3 = (15 g) · (4.18 J/g°C) · (100 °C)
Q3 = 6270 J
- STEP 4:
Q4 = m · ΔHv
where
m = 15 grams
ΔHv (heat of vaporization) = 2257 J/g
Q4 = m · ΔHf
Q4 = 15 · 2257 J/g
Q4 = 33855 J
- STEP 5:
Q5 = mcΔT
where
m = 15 grams
c (specific heat of steam) = 2.03 J/g°C
Tinitial = 100 °C
Tfinal = 110 °C
ΔT = (Tfinal – Tinitial)
ΔT = (110 °C – 100 °C)
ΔT = 10 °C
Q5 = mcΔT
Q5 = (15 g) · (2.03 J/g°C) · (10 °C)
Q5 = 304.5 J
Total heat = 304.5J + 33855 J + 6270 J + 5010 J + 154.5 J
= 45594J
0.25 moles of a gas at 760 mmHg and 298 K are contained in a 6.1 L bottle. What is the pressure of the system if the amount of gas in the bottle is reduced to 0.13 mole and the temperature is reduced to 100 K?
The pressure in the container can be calculated using Ideal gas law. The pressure of the gas at the reduced temperature will be 0.17 atm.
What is ideal gas law?Ideal gas law states the relation between volume, pressure, temperature and number of moles of a gas as written below:
PV = nRT.
Where R is the universal gas constant equal to 0.082 L atm/ K mol.
Given , T = 100 K
n = 0.13 moles
V = 6.1 L
Then, P = nRT/ V
The pressure of the gas at 100 K with 0.13 mole is calculated as follows:
P = (0.13 mole × 100 K × 0.082 L atm/ K mol) / 6.1 L = 0.17 atm.
Therefore, the pressure of the gas is 0.17 atm.
Find more on ideal gas law:
https://brainly.com/question/13821925
#SPJ1
Tropospheric ozone is rapidly consumed in many reactions, including:
SO3(g) + NO(g) --------> NO2(g) + O2(g)
Use the following data to calculate the instantaneous rate of the preceding reaction at t = 0. 000 s and t = 0. 0520 s. Express your answers to three significant figures.
Time (s) [NO] (M)0. 000 2. 00 x 10^-80. 0110 1. 80 x 10^-80. 0270 1. 60 x 10^-80. 0520 1. 40 x 10^-80. 1020 1. 20 x 10^-8
Part 1:
For t = 0. 000 s: ________ M/sPart 2:For t = 0. 052 s: _________ M/s
Part-1 The instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.
Part-2 The instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.
What do the terms average rate and instantaneous rate mean?The concentration change over a chosen time period is the average rate. When you take the measurements makes a difference. The instantaneous rate is the rate that exists at a specific time. The solution is found at that point by determining the slope of the tangent to the concentration vs. time curve.
Given chemical reaction,
SO₃(g) + NO(g) --------> NO₂(g) + O₂(g)
t = 0. 000s
instantaneous rate = 1.38×10⁻⁸ - 2.0×10⁻⁸/0.011 - 0.000
instantaneous rate = 1.8 ×10⁻⁷m/s
Therefore the instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.
for t = 0.052s,
instantaneous rate = 1.2×10⁻⁸ - 1.6×10⁻⁸/0.102 - 0.027
instantaneous rate = 5.3×10⁻⁸m/s.
Therefore the instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.
To know more about instantaneous rate visit:
https://brainly.com/question/28168147
#SPJ4
does calcium oxide reacts with carbon monoxide
Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:
CaO + CO -> CaCO3 + O2
This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.
Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.
Hope This Helps You!
What would happen to the water’s boiling point if MgSO4 is added to it?
Answer:
When Epsom salt (magnesium sulfate) dissolves, it separates into its ions: a magnesium ion (Mg2+) and a sulfate ion (SO4 2-), which results in hard water. When hard water and soap are mixed, the magnesium ion reacts with soap molecules and forms a solid material called a precipitate, which does not dissolve.
Explanation:
can i have brainlest
What is the mole fraction of C2H6O2 in 12. 7 molal aqueous solution ?
The mole fraction of C₂H₆O₂ in 12. 7 molal aqueous solution is 12.7.
What is mole fraction?In chemistry, a mole fraction is the ratio of the moles of one component in a solution or other mixture to the sum of the moles of all the components.
The ratio of the moles of any component to the sum of the moles of all the other components in the mixture is known as the mole fraction. Each gas's partial pressure in a mixture of gases is calculated by multiplying its mole fraction by its total pressure.
The number of solute molecules divided by the sum of the solute molecules and the solvent molecules is known as the mole fraction. This is equal to how many moles of solute there are in a liter of solvent, expressed in molal. If the molal equivalent C₂H₆O₂ is 12.7 this means, all that is in the solution is solute. Hence the mole fraction of C₂H₆O₂ is 12.7.
To know more about mole fraction visit:
https://brainly.com/question/1542843
#SPJ4
When a new substance is formed, what kind of change has taken place? *
Physical Change
Chemical Change
O Phase Change
O None of the above
Answer:
Chemical Change
Explanation:
Physical change and phase change are both changes in the matter's state. Such as solid, gas and liquid. Not what it's made of. So when a new substance is formed, it' a chemical change.
7. What is one of the BEST actions the US government can take to slow global warming?
-provide tax credits to those who carpool
-encourage people to buy electronic books versus paperbacks or hardbacks
-produce commercials that urge people to recycle
-invest in clean technologies such as wind and solar power
one of the BEST actions the US government can take to slow global warming is invest in clean technologies such as wind and solar power
What is the US government doing about global warming?EPA works with industry and others to reduce greenhouse gas emissions through regulatory initiatives and partnership programs. Within the Agency, EPA implements a range of strategies to reduce its own greenhouse gas emissions, increase energy efficiency, and take other steps to reduce its carbon footprintReaching 100% carbon pollution-free electricity by 2035. Achieving a net-zero emissions economy by 2050. Delivering 40% of the benefits from federal investments in climate and clean energy to disadvantaged communitiesMobilizing a whole-of-government approach, the United States is scaling up action at home and abroad to put the world on a path to reach net-zero emissions by 2050 and to achieve the global goal on adaptation. Learn more about the United States at COP27 and the U.S. Center
To learn more about global warming refers to:
brainly.com/question/26402403
#SPJ1
Answer the following questions ( image) with the given options.
Answer:
B. domestic liquid and solid water
Answer:
ans: B) domestic liquid and solid water
Fictitious element X has an average atomic mass of 122. 131 u. Element X has two naturally occuring isotopes. The most abundant isotope has an isotopic mass of 121. 552 u and a relative abundance of 61. 35%. Calculate the isotopic mass of the least abundant isotope
The isotopic mass of the least abundant isotope will be 123.05 u.
Average atomic mass of X = 122.131 u
Assume most abundant isotope = Y and least abundant isotope = Z
Relative abundance (Y) = 61.35%
So,
Z = 100 - 61.35
Z = 38.65 %
Isotopic mass of Y= 121.552 u
Isotopic mass of Z = ?
To calculate the isotopic mass we use the following formula:
Average atomic mass = [(mass Y × percent abundance) + (mass Z × percent abundance)] / 100
put the values
122.131 = [(121.552 × 61.35) + (Z × 38.65)] / 100
12213.1 = (7457.22) + (Z × 38.65)
Z × 38.65 = 12213.1 - 7457.22
Z × 38.65 = 4755.88
Z = 4755.88 / 38.65
Z = 123.05
You can also learn about Isotopic mass from the following question:
https://brainly.com/question/23339356
#SPJ4
Which one of the following compounds behaves as an acid when dissolved in water?
O CH3OCH3
O KOH
O H2SO3
O CH4
H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. The other compounds listed are either bases, alkanes, or ethers and are not acidic when dissolved in water.
H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. Acids are compounds that donate protons when dissolved in aqueous solutions, and sulfuric acid is one of the most common acids used in aqueous solutions. Other compounds listed, such as CH3OCH3, KOH, and CH4, are not acids when dissolved in water. CH3OCH3 is an ether, KOH is a base, and CH4 is an alkane. Acids will typically have a pH value less than 7, while bases have a pH greater than 7. H2SO3 is a strong acid with a pH value of around 1, making it the only compound listed that behaves as an acid when dissolved in water.
learn more about acid here
https://brainly.com/question/14072179
#SPJ4
Photosynthesis Notes
1. Give the Greek root word meaning for photoautotroph.
2. What was von Helmont testing with his willow tree experiment? What was the result?
3. Define the law of conservation of mass.
4.
Describe the experiment used by Joseph Priestly to discover oxygen.
5. List the primary constituents of air.
a.
b.
C.
d.
e.
6. What did Jan Ingenhousz discover about plants?
7. Based on the work of Nicolas de Saussure, what are the two primary sources of mass for
plants?
8. Define photosynthesis-
9. Define potential energy-
Photoautotroph has been derived from the combination of three words, photo -meaning "light", autos- meaning "self", and troph meaning "nutrition".
Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll. Origin of the word: photo- (light) + auto (self) + troph (nourishment). Autotrophs known as photoautotrophs generate complex chemical substances like proteins, lipids, and carbohydrates by absorbing light. Photosynthesis is the name given to this light-mediated process.
An energy-rich carbohydrate like glucose is produced by plants using carbon dioxide, inorganic salts, and water during a process called photosynthesis. As a byproduct, oxygen is also produced, other than glucose. Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll.
To know more about autotrophs, refer to the following link:
https://brainly.com/question/28623341
#SPJ4
Hydrogen bonds are an especially strong type of dipole-dipole interaction What are oil and water examples of
An exceptionally potent type of dipole-dipole interaction is hydrogen bonding. Oil and water are examples of the effects of hydrogen bonding.
Hydrogen bonding are a type of dipole-dipole interaction that occur between the hydrogen atoms of one molecule and the nitrogen or oxygen atoms of another molecule. They are relatively strong interactions, about 5-10% as strong as a covalent bond, and are responsible for the unique properties of many biological molecules, such as DNA and proteins. Oil and water are examples of substances that demonstrate the effects of hydrogen bonding. Water molecules are polar, meaning that they have a partial positive charge on the hydrogen atoms and a partial negative charge on the oxygen atoms. This polarity allows water molecules to form hydrogen bonds with one another, giving water its high surface tension and making it a good solvent for polar substances. Oil, on the other hand, is composed of non-polar molecules such as alkanes and alkenes, which do not form hydrogen bonds with one another. As a result, oil is immiscible with water and will float on top of it, because it does not have the same kind of attractive forces between its molecules as water does, and also the oil molecules have a low polarity. In summary, hydrogen bonds are a type of dipole-dipole interaction that are relatively strong, and oil and water are examples of substances that demonstrate the effects of hydrogen bonding. Water molecules can form hydrogen bonds with one another, giving it the properties of high surface tension and making it a good solvent for polar substances, while oil is composed of non-polar molecules and it is immiscible with water, having low polarity.
To know more about hydrogen bonding please refer: https://brainly.com/question/4542860
#SPJ4
given a mixture of lead (2) oxide,ammonium chloride and sodium chloride,describe how this mixture can be separated to obtain a sample of each
Answer:
It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation. Ammonium chloride sublimes upon heating. Actually, the sublimation is a decomposition of ammonium chloride forming ammonia and hydrogen chloride
Explanation:
what is the pOH of a solution with [H3O+] = 8.2 x 10-5M?
Answer:The pOH of the solution is 9.914
Explanation:
pH is given as the negative logarithm (base 10) of the hydronium ion concentration [H₃O⁺] that is
pH= - log [H₃O⁺]
Since we are given [H₃O⁺]=8.2 x 10⁻⁵,
pH=- log (8.2 x 10⁻⁵)
pH= 4.086
The pOH gives s the measurement of the concentration of OH− ions, Hence,
pH + pOH= 14
from the above calculation, we got pH=4.086
So
4.086 + pOH=14
pOH= 14 - 4.086
pOH= 9.914
The pOH of the solution is 9.914
Openings in the leaves through which gases enter and leave
Answer:
Stomata
Explanation:
Stomata are epithelial cell structures found in tree leaves and needles that help promote plant growth and exchange carbon dioxide and water with the surrounding environment.
Stomata are tiny holes in the epidermis of leaves.
Stomata allow for gaseous exchange as well (oxygen and carbon dioxide).
Freddy mixes a solid chemical with a liquid chemical and generates a chemical reaction. What can be said about any mixture of chemicals he used
Many of these, including cheese, gelatin, and various inks, are commonplace. Like the other classes, mixtures of solids and liquids may be separated in many ways.
science has been actively involved in the pursuit of this goal since it is crucial for a variety of liquids. When two or more distinct substances physically join, a mixture is produced that can be dispersed back into its constituent parts. a bowl of various candies, a pile of various leaves, steel, and sugar syrup A gelatin is any two or more different types of particles together. These particles are physically bound together rather than reacting chemically with one another. Two or more reactants are changed into one or more separate products during a chemical reaction. Alternately, we might assume that a chemical reaction rearranges the atoms of the reactants to create new products.
To learn more about gelatin please click on below link
https://brainly.com/question/28046370
#SPJ4
6.
In Period 2, as the elements are considered from
left to right, there is a decrease in
BO
A.
ionization energy
B.
atomic masS
C.
metallic
character
D. nonmetallic character
Is cannabinol soluble in 1-octanol?
Why or why not?
Answer: Uhmmmm this is what i got...-
Explanation:
It is a matter of fact that the hydrophobic (water-hating) oily compounds of cannabinoids such as CBD, THC and others are not water soluble. The term "water soluble" refers to materials which dissolve in water in a homogenous manner by becoming molecules or ions (such as sugar, alcohol, and salt).