The total enzyme concentration is [Et]=________ nM, if [S]=6mM, Vo=480 nM/min, Km = 4
uM, and the catalytic rate constant (kcat) of the enzyme is 20. min-1

5.3 moles of H3PO4 form from 8.0 moles of H2O.

What is Moles?

Moles (mol) is a unit of measurement used in chemistry to express amounts of a chemical substance. One mole of a substance is defined as the amount of that substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12, which is Avogadro's number (6.022 × 10²³) of particles.

According to the balanced chemical equation, 1 mol of P4010 reacts with 6 mol of H2O to produce 4 mol of H3PO4. Therefore, we can set up a proportion:

6 mol H2O/1 mol P4010 = 4 mol H3PO4/x mol H2O

Solving for x, we get:

x = (8.0 mol H2O * 4 mol H3PO4) / 6 mol H2O

x = 5.3 mol H3PO4

Learn more about Moles from the given link

https://brainly.com/question/29367909

#SPJ1

Magnesium oxide turns a white powder as a result. Magnesium creates by transferring two electrons oxygen atoms. This reaction is exothermic. Magnesium + oxygen → magnesium oxide. 2Mg + O2 → 2MgO.

An illustration of a combination reaction is the burning of magnesium ribbon to produce magnesium oxide. One chemical splits into two compounds, one with a high oxidation state and the other with a low oxidation state, in a disproportionation reaction.

The evolution of light and heat causes an exothermic chemical reaction that results in fire. Three essential components—oxygen, heat, and fuel—must all be present for such a fire to start. The kind of reaction that results in flames is referred to as a combustion reaction in chemistry.

To know more about atoms visit:

https://brainly.com/question/30898688

#SPJ1

The ability to interact with web browser software is provided by the user interface. It offers a visual user interface that enables entry of commands and response from the programme.

Via a Web browser, a user can interact with data or software running on a remote server using a Web user interface or Web app. The user interacts with the content on a web browser, which functions as a client, after downloading it from the web server.

A web browser is a piece of software that enables a user to view and interact with content that may be found on a website, including text, photos, videos, music, and other types of media. Hyperlinks to other web pages at the same or different websites can be found in the text and images on a web page.

To know more about interface visit:-

https://brainly.com/question/13464307

#SPJ9

Several sizes of Cu particles' optical absorption spectra are also described; these spectra contain the plasmon band in the 560–580 nm range and a UV band at 222 nm, becoming flatter with increasing particle size.

From the calibration figure, calculate the copper (II) sulphate concentrations in your two unknown samples. Useful wavelength is 700 nm.

By testing an unknown CuSO4 solution's absorbance with a Colorimeter, you can ascertain its concentration. The corresponding concentration can be obtained on the horizontal axis of the graph by placing the absorbance of the unknown on the vertical axis.

To know more about UV band visit:-

brainly.com/question/13323225

#SPJ1

The compound would have six hydrogen bonds.

It has 3 H bond acceptors. It can form six H bonds with an identical molecule. It can form three hydrogen bonds with water.

Hydrogen bonds are a type of intermolecular force that occurs between a hydrogen atom bonded to an electronegative atom (such as nitrogen, oxygen, or fluorine) and a nearby electronegative atom on another molecule.

The hydrogen bond is a weak electrostatic attraction between the partially positive hydrogen and the partially negative atom, which is typically a lone pair of electrons on the other molecule.

Learn more about hydrogen bonds:https://brainly.com/question/30885458

#SPJ1

Answer: 69.9 g  

Explanation:

The specific heat capacity of the metal, given that the metal was heated to 97 °C and transferred to water at 20.5 °C, is 0.203 Cal/gºC

We'll begin by obtaining the heat absorbed by the water. Details below:

Q = MCΔT

Q = 86 × 1 × 3.6

Q = 309.6 Cal

Finally, we shall determine the specific heat capacity of the metal. Details below:

Q = MCΔT

-309.6 = 20.9 × C × -72.9

-309.6 = -1523.61 × C

Divide both sides by -1523.61

C = -309.6 / -1523.61

C =  0.203 Cal/gºC

Thus, we can conclude that the specific heat capacity of the metal is 0.203 Cal/gºC

Learn more about specific heat capacity:

https://brainly.com/question/19104255

#SPJ1

The mass percentage of KClO₃ in the initial mixture, given that the initial mixture has a mass of 7.25 g, is 62.2%

First, we shall determine the molar mass of KClO₃ and KCl. Details below:

For KClO₃

Molar mass of KClO₃ = 39 + 35.5 + (3 × 16)

Molar mass of KClO₃ = 39 + 35.5 + 48

Molar mass of KClO₃ = 122.5 g/mol

For KCl

Molar mass of KCl = 39 + 35.5

Molar mass of KCl = 74.5 g/mol

Next, we shall determine the mass of KClO₃ in the initial mixture. Details below:

Mass of KClO₃ = [molar mass of KClO₃ / molar mass of (KClO₃ + KCl)] × mass of mixture

Mass of KClO₃ = [122.5 / (122.5 + 74.5)] × 7.25

Mass of KClO₃ = 4.51 g

Finally, we shall determine the mass percentage of KClO₃. Details below:

Mass percentage of KClO₃ = (mass of of KClO₃ / mass of mixture) × 100

Mass percentage of KClO₃ = (4.51 / 7.25) × 100

Mass percentage of KClO₃ = 62.2%

Learn more about percentage composition:

https://brainly.com/question/11952337

#SPJ1

With a radius of 15,299.4 miles (24,622 kilometers), Neptune is about 4 times wider than Earth. If Earth have been the size of a nickel, Neptune would be about as big as a baseball.

From an common distance of 2.8 billion miles (4.5 billion kilometers), Neptune is 30 astronomical units away from the Sun.

Image end result for How is the outer layer of earth one-of-a-kind from the outer layer of Neptune

The outermost layer of Neptune is the atmosphere, forming about 5-10% of the planet's mass, and extending up to 20% of the way down to its core.

Image end result for How is the outer layer of earth distinct from the outer layer of Neptune

The extent of Neptune is 6.3 x 1013 km3. You could healthy fifty seven Earths inner Neptune and nevertheless have room to spare. A day on Earth is 24 hours, but a day on Neptune is 16 hours and 6 minutes. A yr on Earth is, um, 1 12 months obviously, whilst a year on Neptune is 164.79 years.

Learn more about outer layer here;

https://brainly.com/question/15205710

#SPJ9

Answer is closest to option (a) 2850 g. The mole is a fundamental concept in chemistry and is used extensively in calculations involving chemical reactions and stoichiometry.

What is Mole?

The mole is used to convert between the mass of a substance and the number of particles it contains. For example, the molar mass of a substance (the mass of one mole of that substance) can be used to convert the mass of a sample to the number of moles of that substance present.

The balanced chemical equation for the reaction is:

P4O10(s) + 6H2O(l) → 4H3PO4(aq)

From the equation, we can see that for every 6 moles of water that react, 4 moles of H3PO4 are produced.

So, to calculate the moles of H3PO4 produced, we first need to calculate the moles of water that react. The question states that 43.6 moles of water react, so we can use this value to calculate the moles of H3PO4 produced:

moles of H3PO4 = (4/6) x 43.6 = 29.07 moles

Finally, we can use the molar mass of H3PO4 to convert moles to grams:

grams of H3PO4 = moles of H3PO4 x molar mass of H3PO4

= 29.07 moles x 98 g/mol

= 2848.86 g

Learn more about Mole from the given link

https://brainly.com/question/29367909

#SPJ1

The car took 3 seconds to accelerate from 15 m/s to 30 m/s with an acceleration of 5 m/s^2.

We can use the following kinematic equation to solve this problem:

v = u + at

Where

Given:

u = 15 m/s (initial velocity)

v = 30 m/s (final velocity)

a = 5 m/s^2 (acceleration)

Substituting the given values into the equation, we get:

30 m/s = 15 m/s + 5 m/s^2 × t

Simplifying and solving for t, we get:

5 m/s^2 × t = 15 m/s

t = 15 m/s ÷ 5 m/s^2 = 3 seconds

Therefore, the car took 3 seconds to accelerate from 15 m/s to 30 m/s with an acceleration of 5 m/s^2.

Learn more about kinematic equation here : brainly.com/question/28788270

#SPJ1

Answer:

A 3.0 M solution of NaOH has 3.0 moles of NaOH per liter of solution. There are 0.25 L of solution (250mL⋅1L1000mL), so there are 0.25L⋅3.0mol/L=0.75mol of NaOH. The molar mass of NaOH is 40.0 g/mol, so there are 0.75mol⋅40.0g/mol=30g of NaOH, 30.

I hope this can help you! A brainilist is appreciated and helpful! <333

To calculate the formula mass of an unknown acid using the volume of NaOH required to reach the endpoint of the titration, you will need to use the following formula: Formula mass = (molarity of NaOH) x (volume of NaOH) x (molar ratio of NaOH to acid) / (moles of acid).

Here are the steps to follow: Write the balanced equation for the reaction between the acid and NaOH.

Record the volume of NaOH which is used in the titration.

Determine the molarity of the NaOH solution. This can be done by dividing the number of moles of NaOH used in the titration by the volume of NaOH used.

Determine the molar ratio of NaOH to acid from the balanced equation.

Calculate the number of moles of acid that reacted with the NaOH by multiplying the volume of NaOH used in the titration by the molarity of NaOH.

Calculate the formula mass of the acid by plugging in the values for the molarity of NaOH, volume of NaOH, molar ratio of NaOH to acid, and moles of acid into the formula given above.

For example, suppose that you titrated an unknown acid with 0.100 M NaOH, and it took 25.0 mL of NaOH to reach the endpoint. The chemical equation for the reaction is:

Acid + NaOH → NaA + H₂O

The molar ratio of NaOH to acid is 1:1. Let's assume that you used 0.025 moles of NaOH in the titration. Then:

Molarity of NaOH = 0.100 M

Volume of NaOH =25.0 mL =0.0250 L

Moles of acid = (0.100 M) x (0.0250 L) x (1 mol acid / 1 mol NaOH) = 0.00250 mol acid

Now, let's assume that the formula mass of the acid is X. Then:

Formula mass = (0.100 M) x (0.0250 L) x (1 mol acid / 1 mol NaOH) / (0.00250 mol acid) =  X g/mol

Therefore, the formula mass of the unknown acid is X g/mol.

To know more about  formula mass here

https://brainly.com/question/28647347

#SPJ4

--The given question is incomplete, the complete question is

"How to calculate the formula mass of an unknown acid using the manual titration volume of NaOH with which it was titrated, used to reach the endpoint?"--

Potential energy is changed into kinetic energy throughout this process, which is the heat produced during reactions. On the contrary, this happens in an endothermic process.

Bonds break, new bonds form, and protons and electrons move from a structure with greater potential energy to one with lower potential energy during an exothermic reaction. Potential energy is changed into kinetic energy throughout this process.

The energy that is held inside the bonds and phases of the reactants and products is measured by potential energy. The internal energy includes this potential energy. The internal energy of chemical reactions, also known as enthalpy, stands in for the system's total energy.

To know more about exothermic reaction visit:-

https://brainly.com/question/29039149

#SPJ1

Answer:

Explanation:

The moles of sodium hydroxide (NaOH) from the experiment is 0.0518 mol.

Qsurroundings = -Qrxn, so Qsurroundings = -(m x C x ΔT) = - (50.0 g x 4.184 J/g°C x (28.5°C - 20.0°C)) = - 3464.96 J; Qrxn = -Qsurroundings = 3464.96 J

ΔHsol = Qrxn / moles of NaOH = 3464.96 J / 0.0518 mol = -66,871.12 J/mol or -66.87 kJ/mol

The thermochemical equation for the dissociation of sodium hydroxide:

2NaOH(s) → 2Na+(aq) + 2OH-(aq) + heat

or

NaOH(s) → Na+(aq) + OH-(aq) + heat

The enthalpy diagram shows an energy input (endothermic) for the dissociation of NaOH.

Some assumptions made to calculate #2 include assuming the specific heat capacity of water is the same as the specific heat capacity of the NaOH solution and that the density of the solution is the same as water.

The actual value of ΔHsol for NaOH is -44.51 kJ/mol, so the percent error is:

|(-44.51 kJ/mol - (-66.87 kJ/mol)) / -44.51 kJ/mol| x 100% = 50.21%

The breaking and forming of chemical bonds are responsible for the enthalpy change. In the case of the dissociation of NaOH, the bond between the Na and OH groups is broken, which requires an input of energy, making the process endothermic.

From the experiment, the moles of sodium hydroxide (NaOH) is found to be 0.0518 mol.

What is Moles?

In chemistry, a mole is a unit used to measure the amount of a substance, typically atoms or molecules. One mole of a substance is defined as the amount of that substance which contains the same number of particles (atoms, molecules, or ions) as there are in exactly 12 grams of carbon-12

In the experiment described, 2.00 grams of sodium hydroxide (NaOH) was added to 50.0 mL of water in a coffee cup. The temperature of the water was measured before adding the NaOH and recorded as the initial temperature (T initial). The NaOH was then added to the water and the mixture was stirred gently with a thermometer, while the temperature was recorded every 30 seconds for 3 minutes or until it peaked. The highest temperature reached during this time was recorded as the final temperature (T final).

Using the formula Q = mCΔT, where Q is the amount of heat transferred, m is the mass of the water, C is the specific heat of water, and ΔT is the change in temperature, the amount of heat released or absorbed by the NaOH and water mixture can be calculated.

Since the reaction between NaOH and water is an exothermic reaction, the heat released by the reaction is equal to the heat absorbed by the water.

From the moles of NaOH added and its molar mass, the mass of NaOH can be calculated.

Then, the heat of solution can be calculated using the formula:

Heat of solution = Q / moles of NaOH

Learn more about Moles from given link

https://brainly.com/question/29367909

#SPJ1

The balanced chemical equation for the reaction between H₂SO₂ and KOH is:

H₂SO₂ + 2KOH → K₂SO₂ + 2H₂O

From the equation, we can see that 1 mole of H₂SO₂ reacts with 2 moles of KOH.

Given that 300 mL of 0.5 M KOH are required to neutralize 15.0 mL of H₂SO₂, we can calculate the number of moles of KOH used:

moles of KOH = Molarity × Volume (in liters) = 0.5 × 0.3 = 0.15

Since 2 moles of KOH react with 1 mole of H₂SO₂, the number of moles of H₂SO₂ in the 15.0 mL sample can be calculated as:

moles of H₂SO₂ = 0.15/2 = 0.075

The molar concentration of H₂SO₂ can be calculated as:

Molarity = moles/volume (in liters) = 0.075/(15/1000) = 5 M

Therefore, the molar concentration of H₂SO₂ is 5 M, which is magenta in the given color options.

Answer:

The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and potassium hydroxide (KOH) is:

H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O

From the balanced equation, we can see that the stoichiometry of the reaction is 1:2, which means that 1 mole of H₂SO₄ reacts with 2 moles of KOH.

Given that 300 mL of 0.5 M KOH is required to completely neutralize a 15.0 mL sample of H₂SO₄, we can use the following equation to determine the molarity of H₂SO₄:

Molarity of H₂SO₄ x Volume of H₂SO₄ = 2 x Molarity of KOH x Volume of KOH

Molarity of H₂SO₄ = (2 x Molarity of KOH x Volume of KOH) / Volume of H₂SO₄

Molarity of H₂SO₄ = (2 x 0.5 M x 0.300 L) / 0.015 L = 20 M

Therefore, the molar concentration of the initial H₂SO₄ solution was 20 M, which corresponds to option (yellow green).

Answer:

use the prefix trans-

Explanation:

trans = opposite orientation across double bond its this one for apex

cis = same orientation across double bond.

Hopefully this helps! :)

H atoms communicate attractively even when they are infinitely apart. Each electron is drawn to the other centre as two H atoms get close to one another. The electrons of two H atoms draw one another when they come close to one another.

When two atoms of H come close to one another, one electron of each atom repels one nucleus while the other nucleus attracts the other electron. H atoms communicate attractively even when they are infinitely apart.

They cannot make a covalent bond if they are too far apart because their individual 1s orbitals cannot overlap; instead, they remain as two separate objects.

To know more about electron visit:-

https://brainly.com/question/28977387

#SPJ9

The bleach solution has a molarity of 0.0637 M.

Sodium hypochlorite is an inorganic chemical compound with the formula NaOCl (or NaClO), consisting of a sodium cation (Na+) and a hypochlorite anion (OCl or ClO). It is usually referred to in diluted solutions as (chlorine) bleach. It can also be thought of as hypochlorous acid's sodium salt.

Converting the mass of bleach (NaOCl) to moles is the first step.

moles of NaOCl = mass of NaOCl / molar mass of NaOCl

The molar mass of NaOCl is approximately 74.44 g/mol (22.99 g/mol for Na, 15.99 g/mol for O, and 35.45 g/mol for Cl).

moles of NaOCl = 9.50 g / 74.44 g/mol

moles of NaOCl = 0.1274 mol

Next, we may determine the molarity (M) of the bleach solution using the notion of molarity:

Molarity = moles of solute / liters of solution

The solution's volume is supplied to us in millilitres, so we must convert it to litres:

2,000 ml = 2,000 / 1,000 = 2.00 L

Molarity = 0.1274 mol / 2.00 L

Molarity = 0.0637 M

To know more about molarity visit:-

https://brainly.com/question/8732513

#SPJ1

Answer:  C

Explanation:

Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclei.

Because sodium is such a highly reactive metal, it interacts with water quickly to produce sodium hydroxide and hydrogen gas. The correct chemical formula is: H2O + Na(s) = NaOH (aq) + H2 (g)

Hydrochloric acid and lithium oxide react, neutralising the acid. Lithium chloride and water are the results of the process.

A larger surface area is exposed to the water as the molten metal flows across it. Moreover, among all alkali metals, lithium has the largest hydrated radius. This reduces the ionic mobility, which causes the molten metal to move more slowly.

To know more about hydroxide visit:-

https://brainly.com/question/21904397

#SPJ1

If the density of mercury is 13.6 g/mL, the volume of a 155-gram sample of mercury is 11.397 mL.

It follows that:

Mercury has a density of 13.6 g/mL.

155 grammes make to the mercury's weight.

The fact is,

A three-dimensional space enclosed by an object or thing is referred to as its volume.

Mass times volume equals density.

13.6 = Volume 155

quantity = 155/13.6

11.397 mL is the capacity.

As a result, assuming mercury has a density of 13.6 g/mL, a 155-gram sample of mercury has a volume of 11.397 mL.

The complete question is:

The density of mercury is 13.6 g/mL. What is the volume of a 155-gram sample of mercury?

To learn more about volume, refer to:

https://brainly.com/question/27100414

The elements are the simplest chemical forms and they cannot be broken down through chemical reactions. There are many elements in the given formulas.

What are elements?

The elements are defined as those substances whose atoms all have the same number of protons. The elements are considered as the building blocks of matter. Each element has an atomic number and a symbol.

Each atom is regarded as an element. The elements create bonds to form molecules. The isotopes are the elements with the same atomic number but different mass numbers.

NaC₂HO₄ - 'N' , 'C', 'H','O'

H₂F₅BLi - 'H','F','B','Li'

He₂PSO₄ - 'He', 'P','S','O'

He₂O₄PH - 'He', 'O','P','H'

The chlorine radicals can also react with each other to form chlorine molecules, which terminates the chain reaction.

(i) The monochlorinated products resulting from the reaction of 2-methylpentane are:

1-chloro-2-methylpentane

2-chloro-2-methylpentane

3-chloro-2-methylpentane

(ii) The major product in this reaction is 2-chloro-2-methylpentane.

(iii) The step-wise mechanism for the radical halogenation of 2-chloro-2-methylpentane are:

1. Initiation :- This step involves the homolytic cleavage of the chlorine molecule to form two chlorine radicals.

[tex]Cl^ 2[/tex]→ [tex]2Cl[/tex]·

2.Propagation:-  [tex]Cl[/tex]· + 2-methylpentane → [tex]HCl[/tex] + 2-methylpentyl•

  2-methylpentyl• +[tex]Cl^ 2[/tex] → 2-chloro-2-methylpentyl• + [tex]Cl[/tex]·

The 2-methylpentane molecule reacts with the chlorine radical to form a 2-methylpentyl radical and hydrogen chloride. The 2-methylpentyl radical then reacts with another chlorine molecule to form the 2-chloro-2-methylpentyl radical and another chlorine radical.

3.Termination:- 2-methylpentyl• + [tex]Cl[/tex]· → 2-chloro-2-methylpentane

2-methylpentyl• + 2-methylpentyl• → 2,2-dimethylpentane

[tex]Cl[/tex]· + [tex]Cl[/tex]· → [tex]Cl^ 2[/tex]

The 2-chloro-2-methylpentyl radical reacts with a chlorine radical to form the major product, 2-chloro-2-methylpentane. The 2-methylpentyl radical also reacts with another 2-methylpentyl radical to form 2,2-dimethylpentane.

Finally, the chlorine radicals can also react with each other to form chlorine molecules, which terminates the chain reaction.

For more such questions on chlorine radicals , Visit:

https://brainly.com/question/24258369

#SPJ11

The relative solubility is, % relative error = |(s - s') / s| × 100 by using concentrations instead of activities. The % Relative error is [tex]1.42*10^-9[/tex]

The % relative error in solubility, can determine by:
Step 1: Calculate the solubility using concentrations
- Determine the solubility product constant (Ksp) of each compound.
- Write the balanced chemical equation and expression for Ksp.
- Solve for the solubility (s) in terms of concentrations.

Step 2: Calculate the solubility using activities
- Replace concentrations in the Ksp expression with activities (use activity coefficients if needed).
- Solve for the solubility (s') using activities.

Step 3: Calculate the % relative error
- Use the formula: % relative error = |(s - s') / s| × 100

Assuming that the ionic strength is low, we can use the Debye-Hückel equation to calculate the activity coefficients at 25°C and 0.0500 M ionic strength:

log γ± = -0.5091 (z+ z- √(I)) / (1+√(I))

where z+ and z- are the charges of the cation and anion, respectively, and I is the ionic strength.

For KNO3, z+ = 1 and z- = 1, so I = [tex]1/2 (1^2 *0.0500 + 1^2*0.0500)[/tex] = 0.0250. Therefore, the activity coefficients are:

γ±(K+) = γ±(NO_3-) = 0.790

Using the activity coefficients, we can calculate the ion concentrations and then the solubility:

(a) CuCl:

[Cu+] = aCu+ × [CuCl] = [tex](0.3 nm) *√(Ksp/[CuCl]) = 3.17*10^-6 M[/tex]

[Cl-] = [Cu+]

Solubility = [CuCl] = [Cu+] = [Cl-] = [tex]3.17*10^-6 M[/tex]

Using concentrations instead of activities, we have:

[Cu+] = [Cl-] = √(Ksp/[CuCl]) = [tex]3.16*10^{-3}[/tex] M

Solubility = [CuCl] = [Cu+] = [Cl-] = [tex]3.16*10^{-3}[/tex] M

% Relative error = |[tex](3.17*10^{-6} - 3.16*10^{-3})/3.17×10^{-6}[/tex]| × 100% ≈ 99.7%

(b) Fe(OH)2:

[tex][Fe^2+] = aFe^2+ * [Fe(OH)_2] = (0.84 nm) * √(Ksp/[Fe(OH)2]) = M[OH-] = 2[Fe^2+][/tex]

Solubility =[tex][Fe(OH)_2] = [Fe^{2+}][/tex]= [tex]1.42*10^{-9} M[/tex]

Using concentrations instead of activities, we have:

[tex][Fe^2+] = [OH^-] = √(Ksp/[Fe(OH)_2])[/tex] = [tex]3.16*10^-8[/tex] M

Solubility = [tex][Fe(OH)_2] = [Fe^{2+}][/tex]= [tex]3.16*10^-8[/tex] M

% Relative error = [tex]1.42*10^-9[/tex]

For more such questions on relative solubility , Visit:

https://brainly.com/question/26802361

#SPJ11

The complete question is:

Calculate the % relative error in solubility by using concentrations instead of activities for the following compounds in 0.0500 M KNO3 using the thermodynamic solubility products listed in Appendix 2.

(a) CuCl (aCu+ = 0.3 nm)

(b) Fe(OH)2

(c) Fe(OH)3

(d) La(IO3)3

(e) Ag3AsO4 (αAsO43֊= 0.4 nm)

Answer:

99585.48 Pa or approximately 0.981 atm.

Explanation:

To convert the barometric pressure from inches to SI units (Pascals), we can use the following conversions:

1 inch = 25.4 mm

1 mm = 0.1 cm

1 cm = 10 mm

1 mmHg = 133.322 Pa

1 atm = 760 mmHg

Therefore, we can calculate the pressure in SI units as follows:

Convert inches to mm: 29.4 inches x 25.4 mm/inch = 746.76 mm

Convert mmHg to Pa: 746.76 mm x 133.322 Pa/mmHg = 99585.48 Pa

Convert atm to Pa: 1 atm x 760 mmHg/atm x 133.322 Pa/mmHg = 101325 Pa

Calculate the pressure in SI units: 99585.48 Pa/101325 Pa/atm = 0.981 atm

Therefore, the barometric pressure in SI units is 99585.48 Pa or approximately 0.981 atm.

Yes, the three astronauts can safely make the trip back to Earth with only the CO2 absorbers contained in the lunar module.

The Lunar Module (LM) was a spacecraft built by the United States and used in the Apollo program to land humans on the Moon. The LM was designed and built to be used only in the vacuum of space, and it had no capability to operate in the Earth's atmosphere or on the surface of the Moon.

To determine this, we can calculate the amount of glucose needed to sustain the astronauts for the 3-day trip.

We know that each astronaut needs 2500 kilocalories per day, and there are 4 kilocalories per gram of glucose.

Therefore, each astronaut needs 625 grams of glucose per day, or 1875 grams of glucose total for the 3-day trip.

We can then convert this to moles of glucose needed, using the molar mass of glucose (180.156 g/mol).

Therefore, 1875 grams of glucose is equal to 10.4 moles of glucose.

To learn more about lunar module

https://brainly.com/question/12305195

#SPJ1