you estimate that your UA climbed to an altitude greater than 400 feet above ground level (AGL), you must submit a written report of the deviation to the Federal Aviation Administration (FAA).
If you are operating a small unmanned aircraft (UA) and have had a near mid-air collision (NMAC) with a manned airplane, and you estimate that your UA climbed to an altitude greater than 400 feet above ground level (AGL), you must submit a written report of the deviation to the Federal Aviation Administration (FAA).
According to the FAA regulations, any UAS operator involved in an NMAC with a manned aircraft must submit a report to the FAA within ten days of the incident. This report must include the date, time, and location of the incident, as well as a detailed description of the events leading up to the NMAC.
You can submit the report online via the FAA's Aviation Safety Reporting System (ASRS) website. The ASRS is a voluntary reporting system that allows pilots and UAS operators to report incidents without fear of enforcement action, provided that the incident was not a result of reckless or intentional behavior.
Learn more about deviation here
https://brainly.com/question/13905583
#SPJ4
QUESTION 1. Assume we are testing a function with 3 variables:
Variable A: has values 0 and 1
Variable B: has values 0 and 1
Variable C: has values 0 and 1
What is the total 2-way variable value configuration coverage achieved by the following tests:
A=0; B=0; C=1
A=0; B=1; C=1
A=1, B=0, C=0
The total 2-way variable achieved by the given tests is 6.
How to find 2-way variable?
There are three pairs of variables, and each pair can have two possible values, resulting in 2-way variable value configurations. Therefore, the total 2-way variable value configuration coverage achieved by the given tests is 6, as follows:
A=0, B=0
A=0, C=1
B=0, C=1
A=0, B=1
A=1, B=0
A=1, C=0
Learn more about 2-way variable
brainly.com/question/29435977
#SPJ11
How do I solve this?
Answer:
150 handshakes
Step-by-step explanation:
50+50=100 Since the girls shook ONCE to a boy and a girl, we would multiply 100 twice, then add another 50.
What is √45 rounded to the nearest whole number
Answer:
3√5
Step-by-step explanation:
You visit an orchard. The probability that you randomly select a ripe apple is 92%. The probability that you randomly select a ripe cherry is 86%. Design and use a simulation to estimate the probability that you pick an apple that is ripe and a cherry that is not ripe
We calculate that the probability of selecting an unripe cherry and an apple is roughly 6.22%.
To estimate the probability that you pick an apple that is ripe and a cherry that is not ripe, we can use a simulation. Here's one way to do it:
Start by creating a large number of simulations. For example, we could simulate 10,000 visits to the orchard.For each simulation, randomly select an apple and a cherry from the orchard. Use the given probabilities to determine whether each fruit is ripe or not. For example, we could use a random number generator to select a number between 0 and 1, and if the number is less than or equal to 0.92, we consider the apple to be ripe. Similarly, if the number is less than or equal to 0.86, we consider the cherry to be ripe.Check whether the apple is ripe and the cherry is not ripe. If both conditions are true, count this as a success. If not, count it as a failure. After simulating a large number of visits to the orchard, divide the number of successes by the total number of simulations to get an estimate of the probability. For example, let's say we simulate 10,000 visits to the orchard using the method described above. After counting the number of successes and failures, we find that there were 622 visits where we picked a ripe apple and a non-ripe cherry. The estimated probability of this happening is therefore:622 / 10,000 = 0.0622, or approximately 6.22%.
Therefore, based on this simulation, we estimate that the probability of picking a ripe apple and a cherry that is not ripe is approximately 6.22%. Note that the actual probability may be slightly different due to the random nature of the simulation.
To learn more about probability click here
brainly.com/question/30034780
#SPJ4
PLEASE HELP MEEEEEEEEEEE!
What is the measure of the unknown angle?
A straight angle divided into a fifty-eight-degree angle and an unknown angle.
100°
112°
120°
122°
Therefore , the solution of the given problem of angles comes out to be the right response is option d 122°.
An angle meaning is what?Using Cartesian coordinates, the top and bottom walls divide the circular lines that make up a skew's ends. There is a chance that two poles will meet at a junction point. Angle is another outcome of two things interacting. They mirror dihedral forms the most. A two-dimensional curve can be created by arranging two line beams in various ways at their extremities.
Here,
180 degrees is the length of a straight circle. It has been split into a 58-degree angle and an unidentified angle, as far as we are aware. So that we can determine the size of the undetermined angle, let's use subtraction:
=> Angle unknown = 180 degrees minus 58 degrees
=> Angle unknown = 122 degrees
As a result, the undetermined angle is 122° in size.
The right response is (d) 122°.
To know more about angles visit:
https://brainly.com/question/14569348
#SPJ1
The city manager has received approval to add a new fountain to the main park. He uses a coordinate plane to map the existing fountain, represented by rectangle TRUV.
The new fountain will be a reflection of the existing fountain across the y-axis. Which statement about the new fountain, identified as T'R'U'V', is true?
The statement that would be true of the reflection of the existing fountain across the y - axis is B. There are two sets of parallel lines: T'V' || R'U' and T'R' || V'U'
How to reflect across the y - axis ?A reflection of a shape would lead to a congruent shape in another part of the graph. This means that the new shape would have the same set of parallel lines as the original.
The quadrilateral TRUV had parallel line sets of TV || RU and TR || VU so the reflected figure would have congruent parallel lines at T'V' || R'U' and T'R' || V'U'.
Find out more on reflection at https://brainly.com/question/29788009
#SPJ1
The options for the question are:
There are two sets of parallel lines: TV VU and TR || R'U
There are two sets of parallel lines: T'V' || R'U' and T'R' || V'U'
The points T. R, U, and V have these coordinates: (-2,-7),(6,7),(-2,-4)
.and (-6,-4).
The points T. R. U, and V have these coordinates: (2,-7), (6,7),(2,-4) and (6,-4)
Shapera has three sources of income. she earns $15 for each lawn she mows. She earns $7 per hour working part-time at a pet store. She earns $20 each day she delivers newspapers.
Part A: Write an expression that represents her total earnings.
Part B: In the six weeks, Shapera mowed 7 lawns, worked 36 hours at the pet store, and delivered newspapers 7 days. Did she make enough to buy the computer? Explain your answer
(Please answer as fast as possible!!)
Answer:
Step-by-step explanation:
Mowed lawns 15 times 7 = 105 Working at pet store 7 times 36 = 252 Delivers newspapers 20 times 7 = 140 105+252+140= 497explain the real-world meaning of the parameters a, b, and c of the quadratic function model. based on data from 1990 to 2003, the amount of money spent on prescription drugs (per capita) can be modeled by
The parameters a, b, and c of a quadratic function model have different real-world meanings that relate to the specific context of the data being analyzed. In the case of the quadratic function model used to analyze the amount of money spent on prescription drugs per capita between 1990 and 2003.
The parameters can be defined as follows:
a: The parameter a represents the coefficient of the squared term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, a represents the curvature of the relationship between time and spending.
A positive value of a indicates a U-shaped curve, while a negative value of a indicates an inverted U-shaped curve.
b: The parameter b represents the coefficient of the linear term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, b represents the rate of change of spending over time.
A positive value of b indicates that spending is increasing over time, while a negative value of b indicates that spending is decreasing over time.
c: The parameter c represents the intercept of the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, c represents the initial amount of spending at the beginning of the time period being analyzed.
Hence, a represents the curvature of the relationship between time and spending, b represents the rate of change of spending over time, and c represents the initial amount of spending at the beginning of the time period.
To know more about quadratic function model, refer here:
https://brainly.com/question/28863338#
#SPJ11
Need help it’s due tomorrow for test corrections!!
We know that the temperature was 56°F at midnight, so we can plot the point (24, 56)
What is graph ?
Graph can be defined as visual representation of given data using the ordered pairs.
To graph Elroy's data, we can use the x-axis to represent the time of day in hours and the y-axis to represent the temperature in degrees Fahrenheit.
First, we can plot the point (6, 50) to represent the temperature at 6am.
Next, we can use the information that the temperature rose 3° per hour for the next 4 hours. This means that at 10am, the temperature would be 50 + 3(4) = 62°F. We can plot this point at (10, 62). Similarly, we can find the temperature at 7am, 8am, and 9am using the same formula and plot those points as well.
Then, we can use the information that the temperature rose 2° per hour for the next 6 hours. This means that at 4pm, the temperature would be 62 + 2(6) = 74°F. We can plot this point at (16, 74). Similarly, we can find the temperature at 11am, 12pm, 1pm, 2pm, and 3pm using the same formula and plot those points as well.
The temperature then stayed steady until 6pm, so we can draw a horizontal line at y = 74 from 4pm to 6pm.
For the next 2 hours, the temperature dropped 1° per hour. This means that at 8pm, the temperature would be 74 - 2 = 72°F. We can plot this point at (20, 72). Similarly, we can find the temperature at 7pm using the same formula and plot that point as well.
Therefore, we know that the temperature was 56°F at midnight, so we can plot the point (24, 56).
To learn more about Graph from given link.
https://brainly.com/question/17267403
#SPJ1
Evaluate q2 + (r5 -10) if q = 5 and R = 2
Answer:
q=5,R=2
Step-by-step explanation:
=5×2+(2×5-10)
=10+(10-10)
=10+0
=10
2. The function f gives the dollar value of a bond t years after the
bond was purchased. The graph of Jis shown.
What is f(0)? What does it mean in this situation?
b. What is f(4.5)? What does it mean in this situation?
c. When is f(t) = 1500? What does this mean in this
situation?
The function f a. f(0) represents the bonds after 0 years. That is the immediate value of bond in dollars at 0 year. b. f(4.5) represents the value of the bond 4.5 years later.
What does a mathematical function mean?A function in mathematics is a rule that designates a certain output value for each input value. Each input from the domain has precisely one output in the range, forming a relationship between two sets known as the domain and the range. The letter f(x), where x is the input variable and f(x) is the output variable, is a common way to represent a function. The output variable is specified by the function's rule, but the input variable can accept any value from the function's domain.
For the given graph of the function:
a. f(0) represents the bonds after 0 years. That is the immediate value of bond in dollars at 0 year.
b. f(4.5) represents the value of the bond 4.5 years later.
Learn more about function here:
https://brainly.com/question/12431044
#SPJ1
olympic gold medal has a gram of 586 grams. what is the mass of a 2018 olympic gold medal in hectograms
The mass of a 2018 Olympic gold medal in hectograms is 58.6 hg.
First, we need to know the mass of the Olympic gold medal in grams. According to the question, the mass of an Olympic gold medal is 586 grams.
To convert grams to hectograms, we need to divide the mass in grams by 100. This is because there are 100 grams in 1 hectogram.
To do the division, we can use a calculator. Dividing 586 by 100 gives us 5.86.
The answer we get is in hectograms, so we can write it as 5.86 hg. This means that the mass of a 2018 Olympic gold medal is 5.86 hectograms.
To know more about hectograms, refer here:
https://brainly.com/question/1058206#
#SPJ11
Some of the dimensions of a house are shown below.
Calculate the length u.
Give your answer in metres to 2 d.p.
56°
1.65 m
u
43°
Not drawn accurately
Using trigonometric relations we can see that u = 4.28m
How to find the length of u?First we can find the length of the shared side using the trigonometric relation:
tan(56°) = x/1.65m
1.65m*tan(56°) = x
2.45m = x
Then the length of the bottom side of the right triangle in the right side is iven by:
tan(43°) = 2.45m/y
Solving for y:
y = 2.45m/tan(43°)
y = 2.63m
Then the length of u is:
u = 1.65m + 2.63m = 4.28m
Learn more about right triangles at:
https://brainly.com/question/2217700
#SPJ1
a political candidate has asked you to conduct a poll to determine what percentage of people support him. if the candidate only wants a 3% margin of error at a 95% confidence level, what size of sample is needed? when finding the z-value, round it to four decimal places.
A sample size of 1068 is needed with a 95% confidence level and a 3% margin of error to estimate the proportion of people who support a political candidate.
To determine the sample size needed to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level, we can use the formula:
n = (z^2 * p * (1 - p)) / (E^2)
where n is the sample size, z is the z-value corresponding to the desired confidence level (95% confidence level corresponds to z = 1.96), p is the estimated proportion of the population that supports the candidate (we can use 0.5 as a conservative estimate), E is the desired margin of error (3% or 0.03)
Substituting the values into the formula, we get:
n = (1.96^2 * 0.5 * (1 - 0.5)) / (0.03^2) = 1067.11
Rounding up to the nearest integer, we need a sample size of 1068 to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level.
To know more about confidence interval:
https://brainly.com/question/24131141
#SPJ4
How many consecutive zeros are there at the end of 6^8 x 10^3 x 8^2 x 25^5 ?
Answer:
13
Step-by-step explanation:
(6^8)(10^3)(8^2)(25^5)=1049760000000000000
so 13 zeros after 104976
in a recent survey of 619 salinas residents, 437 stated they experienced significant traffic delays within the last month. if one of the 619 residents is selected at random, what is the probability they have experienced delays?
If one of the 619 residents is selected at random, the probability they have experienced delays is 70.6%.
To find the probability that a randomly selected Salinas resident has experienced significant traffic delays within the last month, we need to use the formula for probability:
Probability = Number of favorable outcomes / Total number of outcomes
In this case, the favorable outcome is the number of residents who have experienced significant traffic delays, which is 437. The total number of outcomes is the total number of residents surveyed, which is 619. Therefore, the probability is:
Probability = 437 / 619 ≈ 0.706
This means that there is a 70.6% chance that a randomly selected Salinas resident has experienced significant traffic delays within the last month, based on the given survey results.
To learn more about probability click on,
https://brainly.com/question/23161537
#SPJ4
find the volume of the triangular prism 2.4 cm 3.6 cm 6 cm
Answer:
25.92cm²
Step-by-step explanation:
First, do 2.4x3.6=8.64
then multiply by length so 8.64x6=25.92
Hope this helps
Write the equation y - 6 = -5(x + 1) in
slope-intercept form.
answer - y = -5x + 1
Which number correctly completes the ratio table?
2 8 13 14
16 Square 104 112
A. 64
B. 48
C. 40
D. 32
Using a constant factor, the number that completes the ratio table is calculated as: A. 64.
How to Solve Ratio Table?To complete the ratio table, we can observe that each number in the second row is obtained by multiplying the corresponding number in the first row by a constant factor of 8.
Thus, the ratio of the first row number to the second row number is 1:8.
This means that:
2 * 8 = 16
13 * 8 = 104
8 * 8 = 64.
Therefore, we can also get the correct number that completes the ratio table by multiplying 8 by 8, which is:
8 * 8 = 64.
So, the missing number in the ratio table is: A. 64.
Learn more about ratio on:
https://brainly.com/question/13513438
#SPJ1
Benzoic acid is used to determine the heat capacity of bomb calorimeters because it can be obtained in pure form and its energy of combustion is known very accurately (-26.43 kJ/g).
Determine the calorimeter constant of the calorimeter that had a temperature increase of 9.199 degrees Celsius when 3.500 g of benzoic acid was used.
Benzoic acid is used to determine the heat capacity of bomb calorimeters because it can be obtained in pure form and its energy of combustion is known very accurately (-26.43 kJ/g).
The calorimeter constant is -2873.5.
Determine the calorimeter constant of the calorimeter that had a temperature increase of 9.199 degrees Celsius when 3.500 g of benzoic acid was used.To determine the calorimeter constant, follow these steps:
Explanation:
1. Calculate the energy released by the benzoic acid combustion: Multiply the mass of benzoic acid by its energy of combustion.
Energy released = mass × energy of combustion
Energy released = 3.500 g × -26.43 kJ/g = -92.505 kJ
2. Convert the temperature increase to a change in energy: Multiply the temperature increase by the mass of benzoic acid.
ΔEnergy = temperature increase × mass of benzoic acid
ΔEnergy = 9.199°C × 3.500 g = 32.1965 J
3. Determine the calorimeter constant: Divide the energy released by the change in energy.
Calorimeter constant = Energy released / ΔEnergy
Calorimeter constant = -92.505 kJ / 32.1965 J
Note: We need to convert the units to be consistent, either to J or kJ.
1 kJ = 1000 J, so -92.505 kJ = -92505 J.
Calorimeter constant = -92505 J / 32.1965 J = -2873.5
The calorimeter constant is -2873.5.
To know more about calorimeter :
https://brainly.com/question/4802333
#SPJ11
What is the value of 2(÷)3+if x = 72, y = 24, and z=12?
the value of the expression 2 ÷ 3 + (x / y) - z, where x = 72, y = 24, and
z = 12, is approximately -8.33.
However, assuming that the intended expression is 2 ÷ 3, we can evaluate it using the rules of arithmetic. Division is performed before addition, so the expression can be rewritten as:
2 ÷ 3 + (x / y) - z
Substituting the given values of x, y, and z, we get:
2 ÷ 3 + (72 / 24) - 12
To evaluate this expression, we need to perform the division first:
2 ÷ 3 + 3 - 12
Next, we can simplify by combining like terms:
2 ÷ 3 - 9
To evaluate this expression, we need to perform the division first:
0.666666... - 9
Finally, we can simplify by subtracting:
-8.333333...
Therefore, the value of the expression 2 ÷ 3 + (x / y) - z, where x = 72, y = 24, and z = 12, is approximately -8.33.
It's important to note that if the intended expression was not 2 ÷ 3, the answer may be different. Additionally, it's important to be clear and precise when writing mathematical expressions to avoid ambiguity and confusion.
To know more about rules of arithmetic click here:
brainly.com/question/16240708
#SPJ4
Triangle 1 and triangle 2 are similar right triangles formed from a ladder leaning against a building.
Determine the distance from the bottom of the building to the point where the ladder is touching the building for triangle 2.
4 feet
7 feet
9 feet
14 feet
The distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.
What is triangle?
A triangle is a polygon with three sides and three angles. It is one of the most basic geometric shapes and is often used in geometry, trigonometry, and other branches of mathematics.
Since Triangle 1 and Triangle 2 are similar right triangles formed from the same ladder leaning against the same building, their corresponding sides are proportional to each other.
Let's use the concept of similarity and proportions to solve for the unknown distance in Triangle 2. We can set up the following proportion based on the corresponding sides of the two triangles:
(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)
We know that in Triangle 1:
the length of the hypotenuse (the ladder) is 16 feet
the length of the horizontal leg (the distance along the ground) is 8 feet
the length of the vertical leg (the distance from the bottom of the building to the point where the ladder is touching the building) is 16 feet
Using the Pythagorean Theorem, we can solve for the length of the vertical leg of Triangle 2:
(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)
16 : 8 = (vertical leg of Triangle 2) : 7
Simplifying the proportion, we get:
2 : 1 = (vertical leg of Triangle 2) : 7
To solve for the vertical leg of Triangle 2, we can multiply both sides of the proportion by 7:
2 * 7 : 1 * 7 = (vertical leg of Triangle 2)
14 : 1 = (vertical leg of Triangle 2)
Therefore, the distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.
To learn more about triangle visit:
https://brainly.com/question/1058720
#SPJ1
find the solution of the system of equations 2x + 6y = -16 -6x - 3y = -27 i need a answer neoowww
The solution of the system of equations are (7,-5).
Define about the system of equations?A set or group of equations that you solve all at once is referred to as a "system" of equations. The fundamental linear system comprises two equations as well as two variables. Linear equations (those that graph simply straight lines) are easier to understand than non-linear ones.The system of equations:
2x + 6y = -16 and -6x - 3y = -27
2x + 6y = -16
Divide by 2
x + 3y = -8 ..eq 1
-6x - 3y = -27 ..eq 2
Use elimination method.
Add eq 1 from 2
x + 3y -6x -3y = -8 - 27
-5x = -35
x = 7
3y = -8 - 7
y = -15/3
y = -5
Thus, the solution of the system of equations are (7, -5).
Know more about the system of equation
https://brainly.com/question/25976025
#SPJ1
if my grade is 88 but i have a test that counts for 25 percent of my total grade and i get an 80 what will my grade be
If your grade is 88 but you have a test that counts for 25 percent of your total grade and you get an 80, your grade will be 86.
Test scores are an essential aspect of an educational system. Teachers use them to evaluate how well students have grasped concepts or learned material from a class or course. They help in establishing the academic strength and weaknesses of the student.
The test score you got is 80, which makes 25% of the total grade you can have for this course. This means that 0.25*80 = 20 marks will be added to your final grade. Your previous grade was 88, which will not be counted with the test marks.
Hence the marks you will have for the final grade will be 88 + 20 = 108. Divide this number by 1.25 (as 25% is equivalent to 0.25), which results in 86.4. You can round it off to the nearest integer, which is 86.
Therefore, your final grade will be 86.
To know more about total grade refer here:
https://brainly.com/question/21017787#
#SPJ11
Question 4 In which circuit represented below are meters properly connected to measure the current through resistor R1 and the potential difference across R2? A) LWA OAA OB.B OCC ODD
In Circuit B, the ammeter is connected in series with resistor R1 and the voltmeter is connected in parallel with resistor R2.
Therefore, the circuit is correctly setup to measure the desired quantities.
The correct circuit for measuring the current through resistor R1 and the potential difference across R2 is Circuit B. Circuit B is formatted with an ammeter measuring the current through R1 and a voltmeter measuring the potential difference across R2.
An ammeter is used to measure current and should be connected in series with the component it is measuring; whereas a voltmeter is used to measure potential difference and should be connected in parallel with the component it is measuring.
for such more questions on correct circuit
https://brainly.com/question/16511109
#SPJ11
the probability that no cars will pass by a section in an hour is 0.4 (modelled as a poisson process. further, no car passed by in the last 2 hours. what is the probability that you have to wait at least 1 more hour (after the 2 hours) for the next car?
The probability of having to wait at least 1 more hour for the next car is 0.631 or approximately 63.1%.
The given problem can be solved using the Poisson distribution. Let [tex]$\lambda$[/tex] be the average rate of cars passing through the section per hour. Then, since the probability of no cars passing in one hour is 0.4, we have:
[tex]$P(X=0)=\frac{\lambda^0e^{-\lambda}}{0!}=0.4$[/tex]Solving for [tex]$\lambda$[/tex], we get [tex]$\lambda= -ln(0.4) \approx 0.916$[/tex]. Therefore, the probability of no cars passing in three hours (two hours have already passed) is:
[tex]$P(X=0 \text{ in } 3 \text{ hours})=\frac{(0.916\cdot3)^0e^{-0.916\cdot3}}{0!} \approx 0.148$[/tex]The probability of waiting at least 1 more hour for the next car is the same as the probability of having no cars pass in the next hour, given that no cars have passed in the last 2 hours. This can be calculated using the conditional Poisson distribution:
[tex]$P(X=0 \text{ in } 1 \text{ hour} | X=0 \text{ in } 3 \text{ hours}) = \frac{P(X=0 \text{ in } 1 \text{ hour and } X=0 \text{ in } 3 \text{ hours})}{P(X=0 \text{ in } 3 \text{ hours})}$[/tex][tex]$= \frac{\frac{(0.916\cdot1)^0e^{-0.916\cdot1}}{0!}\cdot \frac{(0.916\cdot2)^0e^{-0.916\cdot2}}{0!}}{0.148} \approx 0.631$[/tex]
Therefore, the probability of having to wait at least 1 more hour for the next car is 0.631 or approximately 63.1%.
Learn more about Probability:
https://brainly.com/question/24756209
#SPJ4
student id numbers are created using the digits 0-9. how many five- digit student id numbers can be created if repeat digits are allowed? what if repeats are not allowed?
There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).
However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).
The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".
When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.
Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.
To know more about combinations click on below link:
https://brainly.com/question/20211959#
#SPJ11
a town doubles its size every 38 years. if the population is currently 6,790, what will the population be in 76 years?
Population will be 43,160 in 76 years if a town doubles its size every 38 years if the current population is 6,790.
Since the town doubles in size every 38 years, we can use the formula:
P = P0 * 2^(t/T)
where P0 is the initial population, P is the population after time t, and T is the doubling time (38 years in this case).
We know that the current population is P0 = 6,790, and we want to find the population in 76 years, which is t = 76. Plugging these values into the formula, we get:
P = 6,790 * 2^(76/38)
P = 6,790 * 2^2
P = 6,790 * 4
P = 27,160
Therefore, the population of the town will be 27,160 in 76 years.
To know more about time refer here:
https://brainly.com/question/15356513#
#SPJ11
A ball is thrown from an initial height of 3 meters with an initial upward velocity of 30(m)/(s). The ball's height h (in meters) after t seconds is given by the following.
h=3+30t-5t^(2)
Find all values of t for which the ball's height is 13 meters.
Answer: -451
Step-by-step explanation:
so, the height we are trying to find is 13 meters.
13=3+30t-5t^2
so, we can go ahead and pull that number in.
now we have to subtract the 3 to try and get as much as possible over on the other side to find t.
10=30t-5t^2
Step-by-step explanation:
h(t) = 3 + 30t - 5t²
the height is set to 13 meters.
since the ball will go up and then come back down again, we expect 2 points of time, when the ball is at 13 meters high. if any at all, by the way (keep that in mind for similar questions, the object might not even reach a certain height).
13 = 3 + 30t - 5t²
10 = 30t - 5t²
2 = 6t - t²
0 = -t² + 6t - 2
the general solution to a quadratic equation
ax² + bx + c = 0
is
x = (-b ±sqrt(b² - 4ac))/(2a)
in our case
x = t
a = -1
b = 6
c = -2
t = (-6 ±sqrt(6² - 4×-1×-2))/(2×-1) =
= (-6 ±sqrt(36 - 8))/-2 = (-6 ±sqrt(28))/-2 =
= (-6 ±sqrt(4×7))/-2 = (-6 ±2×sqrt(7))/-2 =
= 3 ± sqrt(7)
t1 = 3 + sqrt(7) = 5.645751311... seconds
t2 = 3 - sqrt(7) = 0.354248689... seconds
on its way up the ball will pass the mark of 13 meters after about 0.35 seconds, and on its way back down it will pass the mark of 13 meters again after about 5.65 seconds.
If a musician uses his credit card to pay for a new violin that cost 2900 and does not pay on it until the second month what will the 3. 35% monthly interest charge be at the end of the first month show your work and how you got your answer
The formula to calculate interest charge when the musician does not make any payments for one month is Interest = Principal * Rate * Time. Using the given values, the interest charge for the first month is $97.15, making the total owed amount at the end of the first month $2,997.15.
If the musician does not make any payments for one month, the amount owed will accumulate interest. To calculate the interest charge, we can use the following formula:
Interest = Principal * Rate * Time
where the principal is the initial amount owed, the rate is the monthly interest rate as a decimal, and the time is the time period in months.
In this case, the principal is $2,900, the monthly interest rate is 3.35% expressed as a decimal (0.0335), and the time is one month.
So, the interest charge for the first month will be:
Interest = $2,900 * 0.0335 * 1
Interest = $97.15
Therefore, at the end of the first month, the musician will owe the initial balance of $2,900 plus the interest charge of $97.15, for a total of $2,997.15.
Learn more about interest rates here: brainly.com/question/14540021
#SPJ4