Todd had a piggy bank holding $384. He began taking out money each month. The table shows the amount remaining, in dollars, after each of the first four months

Able Cable offers the fastest mean downloading speed among the three providers with a speed of 4.0 Mbps.

We can calculate the mean (average) download speed for each provider and compare them to determine which company offers the fastest mean downloading speed.

Based on the given data, the mean download speed for each provider is:

City Net: (3.6 + 3.7 + 3.7 + 3.6 + 3.9) / 5 = 3.7 megabits per second (Mbps)

Able Cable: (3.9 + 3.9 + 4.1 + 4.0 + 4.1) / 5 = 4.0 Mbps

Tel-N-Net: (3.9 + 3.7 + 4.0 + 3.6 + 3.8) / 5 = 3.8 Mbps

Therefore, Able Cable offers the fastest mean downloading speed among the three providers with a speed of 4.0 Mbps.

Learn more about speed

brainly.com/question/28224010

#SPJ11

A sequence of transformations that maps figure 1 onto figure 2 and then figure 2 onto figure 3 include the following: D. a translation followed by a rotation.

In Mathematics and Geometry, a translation can be defined as a type of rigid transformation which moves every point of the object in the same direction, as well as for the same distance.

This ultimately implies that, a translation is a type of rigid transformation  that does not change the orientation of the original geometric figure (pre-image).

In Mathematics, a rotation is a type of transformation which moves every point of the object through a number of degrees around a given point, which can either be clockwise or counterclockwise (anticlockwise) direction.

Read more on transformation here: https://brainly.com/question/15832612

#SPJ1

Complete Question:

Which sequence of transformations maps figure 1 onto figure 2 and then figure 2 onto figure 3?

a reflection followed by a translation

a rotation followed by a translation

a translation followed by a reflection

a translation followed by a rotation

The total length of the race is approximately 28.24 miles.

To determine the total length of the race, we can use the given information: Piotr has completed 24 miles, which represents 85% of the race. We can set up a proportion to find the total length. Let 'x' represent the full length of the race:

(24 miles) / x = 85% / 100%

To solve for 'x', we can first convert the percentage to a decimal by dividing 85 by 100, resulting in 0.85:

24 / x = 0.85

Next, we can cross-multiply:

0.85 * x = 24

Now, we can solve for 'x' by dividing both sides by 0.85:

x = 24 / 0.85

x ≈ 28.24 miles

Therefore, the total length of the race is approximately 28.24 miles. Piotr has completed 85% of this distance, which means he has run 24 miles and has around 4.24 miles remaining to finish the race.

Learn more about percentage here: https://brainly.com/question/24339661

#SPJ11

Properties B and C together ensure that there exists a 'c' in (-1, 1) at which f'(c) = 0.
Your answer: 1. B and C only

Which properties ensure that there exists ?

a 'c' in (-1, 1) at which f'(c) = 0, given f(-1) = f(1) = and the properties A, B, and C.

First, let's define the properties:
f(1) = 2
f is continuous on (-1, 1]
f(x) = (22/3) - x^2

To ensure that there exists a 'c' in (-1, 1) at which f'(c) = 0, we will use the Mean Value Theorem (MVT). MVT states that if a function is continuous on a closed interval and differentiable on an open interval, then there exists at least one 'c' in the interval where the derivative is 0.

Looking at property B, it states that f is continuous on (-1, 1], which satisfies the first condition of the MVT. Property C provides a specific function for f(x), which is differentiable on (-1, 1) since it is a polynomial function. Therefore, properties B and C together ensure that there exists a 'c' in (-1, 1) at which f'(c) = 0.

Your answer: 1. B and C only

Learn  more about Mean Value Theorem.

brainly.com/question/30403137

#SPJ11

Using the given function, we can plug in x=3 and t=5 to find the concentration of the drug in the blood:

C = f(x,t) = 26te^-(5-x)
C = f(3,5) = 26(5)e^-(5-3)
C = f(3,5) = 130e^-2

Using a calculator, we can simplify this to:

C = f(3,5) ≈ 32.22 mg/liter

Therefore, the concentration of the drug in the blood 3 hours after injection with a dosage of 5 mg is approximately 32.22 mg/liter.
Hi! To find the concentration C at f(3,5), you'll need to plug in the values for x and t into the given function f(x,t) = 26te^-(5-x).

So, f(3,5) = 26(5)e^-(5-3) = 130e^(-2).

Now, calculate the exponential value: e^(-2) ≈ 0.1353.

Finally, multiply this value by 130: 130 * 0.1353 ≈ 17.589.

Thus, f(3,5) = 17.589 mg/liter (rounded to 3 decimal places).

Visit here to learn more about exponential value brainly.com/question/30239903

#SPJ11

The value of KL as shown in the image is 12 units

An equation is an expression that shows how numbers and variables using mathematical operators.

Two triangles are said to be similar, if the ratio of their corresponding sides are in the same proportion.

For the triangle shown, since triangle XYZ is similar to triangle JKL, hence:

KL/XY  = KJ / XZ

substituting, KJ = 10.44:

KL / 8.7 = 11.31 / 8.2

KL = 12

The value of KL is 12 units

Find out more on equation at: https://brainly.com/question/22688504

#SPJ1

The frequency table shows that 152 female students chose website design out of a total of 362 female students, which is about 0.421 or 42%.

The frequency table shows that out of the total 362 female students attending the technology summer camp, 152 chose website design, which is a design class. This means that the percentage of female students who chose a design class is 152/362 = 0.4202 or about 42%.

However, the camp counselor says that about 68% of female students chose a design class. It is unclear where the counselor obtained this information from as it is not reflected in the frequency table. It is possible that the counselor gathered this information from a different survey or observation.

On the other hand, the camp director's statement is more accurate as it is based on the frequency table.

The frequency table shows that 152 female students chose website design out of a total of 362 female students, which is about 0.421 or 42%. It is important to rely on data and accurate information when making statements or drawing conclusions.

To  know more about frequency table refer here

https://brainly.com/question/31189964#

#SPJ11

The amount of time it would take for the ball to reach its maximum height is 2.1825 seconds.

Based on the information provided, we can logically deduce that the height (h) in feet, of this ball above the​ ground is related to time by the following quadratic function:

Next, we would determine the maximum height of this ball by taking the first derivate in order to determine the time (t) it takes as follows;

h(t) = -16t² + 90t

h'(t) = -32t + 90

90 = 32t

t = 90/32 = 2.1825 seconds.

h(2.1825) = -16(2.1825)² + 90(2.1825)

h(2.1825) = 120.21 feet.

Read more on time here: brainly.com/question/26746473

#SPJ1

Answer:

Add the lengths:

5x - 16 + 2x - 4 = 7x - 20

Answer:

3. 254.34 mm^2

4. 615.44 cm^2

5. 314 in^2

6. 7.065 in^2

7. 3.14 cm^2

8. 1.76625 ft^2

Step-by-step explanation:

AREA FORMULA: π * r^2

This question is asking to use 3.14 or 22/7 for x.

The following steps will use 3.14.

3. r = 9 mm (r^2 = 81 mm)

A = 81 * 3.14 = 254.34 mm^2

4. r = 14 cm (r^2 = 196 cm)

A = 196 * 3.14 = 615.44 cm^2

5. r = 10 in (r^2 = 100 in)

A = 100 * 3.14 = 314 in^2

Questions 6-8 show the diameter of the circle.

Divide by 2 to find the radius, then plug that into the area formula

6. r = 1.5 in (r^2 = 2.25 in)

A = 2.25 * 3.14 = 7.065 in^2

7. r = 1 cm (r^2 = 1 cm)

A = 1 * 3.14 = 3.14 cm^2

8. r = 0.75 ft (r^2 = 0.5625 ft)

A = 0.5625 * 3.14 = 1.76625 ft^2

The temperature of 80°F is equivalent to 48°C.

To convert 80°F to Celsius degrees using the formula C = (F - 32), we substitute the given Fahrenheit temperature into the formula.

C = (80 - 32) = 48

Therefore, the temperature of 80°F is equivalent to 48°C.

The Celsius scale is commonly used in scientific and international contexts, while the Fahrenheit scale is more prevalent in the United States. The conversion formula allows us to convert temperatures between these two scales.

Rounding to the nearest tenth of a degree, we find that 48°C remains unchanged.

It's worth noting that the Celsius scale sets the freezing point of water at 0°C and the boiling point at 100°C at standard atmospheric pressure. In contrast, on the Fahrenheit scale, water freezes at 32°F and boils at 212°F.

Learn more about Celsius degrees, and Fahrenheit temperature.

brainly.com/question/31376890

#SPJ11

The value of the account is 1.05 times as large as the previous year

There is a 2-column table with 6 rows representing the value of a savings account at the end of each year for 6 years. The relationship between the years and the value of the account is exponential, and there is a rate of change in this exponential relationship.

To find the rate of change in this exponential relationship, you can follow these steps:

1. Divide the value of the account in the second year by the value of the account in the first year: 5,512.50 / 5,250 = 1.05.

2. Since the relationship is exponential and the rate of change is constant, the account's value will increase by the same factor every year. In this case, the rate of change is 1.05, which means that after each year, the value of the account is 1.05 times as large as the previous year.

In summary, the rate of change in the exponential relationship between the increasing years and the increasing value of the account is 1.05, meaning that after each year, the value of the account is 1.05 times as large as the previous year.

To know more about "Exponential relationship" refer here:

https://brainly.com/question/29784332#
#SPJ11

|r| = 7/80 < 1, the series is convergent. The sum = 0/(1-7/80) = 0. the sum of the geometric series is 0.

The geometric series with first term 0 and common ratio 7/80 is given by 0, 7/80, (7/80)², (7/80)³, ... In general, the nth term is (7/80)ⁿ⁻¹.

To determine whether this series is convergent or divergent, we can use the formula for the sum of an infinite geometric series:

sum = a/(1-r)

where a is the first term and r is the common ratio. In this case, a = 0 and r = 7/80.

If |r| < 1, then the series converges to the sum given by the above formula. If |r| ≥ 1, then the series diverges.

In this case, |r| = 7/80 < 1, so the series is convergent. The sum is given by:

sum = 0/(1-7/80) = 0

Therefore, the sum of the geometric series is 0.

To learn more about geometric series click here

brainly.com/question/21087466

#SPJ11

The volume of the table tent 3 cmH8 cm12 cm is 288 cubic cm.

The volume of the table tent can be found by multiplying the length, width, and height of the tent.

Volume = length x width x height

In this case, the length is 12 cm, the width is 8 cm, and the height is 3 cm.

Volume = 12 cm x 8 cm x 3 cm

Volume = 288 cubic cm

Therefore, the volume of the table tent is 288 cubic cm.

Learn more about volume at https://brainly.com/question/463363

#SPJ1

The center of mass of the metal plate with density rho(x,y) = αx+ βy g/cm2 must lie on the line x + y = 7/6.

To find the center of mass of the metal plate, we need to calculate the coordinates of its centroid (X, Y). The coordinates of the centroid are given by:

X = (1/M) ∬(R) x ρ(x,y) dA, Y = (1/M) ∬(R) y ρ(x,y) dA

where M is the total mass of the plate, R is the region of integration (0 ≤ x ≤ 1, 0 ≤ y ≤ 1), and dA is the differential area element.

We can calculate the total mass M of the plate as follows:

M = ∬(R) ρ(x,y) dA = α/2 + β/2 = (α + β)/2

Using the given density function, we can calculate the integrals for X and Y:

X = (1/M) ∬(R) x ρ(x,y) dA = (2/αβ) ∬(R) x(αx+βy) dA = (2/3)(α+β)

Y = (1/M) ∬(R) y ρ(x,y) dA = (2/αβ) ∬(R) y(αx+βy) dA = (2/3)(α+β)

Thus, the coordinates of the centroid are (X, Y) = ((2/3)(α+β), (2/3)(α+β)).

Now, if we substitute X + Y = (4/3)(α+β) into the equation x + y = 7/6, we get:

x + y = 7/6

2x + 2y = 7/3

2(x+y) = 4/3(α+β)

x+y = (2/3)(α+β)

which shows that the centroid lies on the line x + y = 7/6. Therefore, the center of mass must also lie on this line.

For more questions like Integral click the link below:

https://brainly.com/question/22008756

#SPJ11

Answer:

12(8) + (1/2)(13)(20) + (1/4)π(8^2)

= 96 + 130 + 4π = 226 + 16π ft^2

= about 276.27 ft^2

The area of the panel left after she cuts the hole is 5.215 ft²

Given that a circular hole of 1 foot by foot has been cut out of a rectangular panel of 3 feet by 2 feet,

We need to find the area of the remaining part after the cutting of the hole,

So, we will find the same by subtracting the area of the hole from the area of the panel.

So, area of the hole = π×radius² = 3.14×0.5² = 0.785 ft²

Area of the panel = length × width = 3 × 2 = 6 ft²

Area remaining part = 6-0.785 = 5.215 ft²

Hence the area of the panel left after she cuts the hole is 5.215 ft²

Learn more about area click;

https://brainly.com/question/27683633

#SPJ1

The value of measure of RU is,

⇒ 149°

We have to given that;

In circle,

m RS = 88 degree

m ST = 35 degree

Hence, We can formulate;

The value of measure of RU is,

⇒ 360° - ( 88° + 35° + 88°)

⇒ 360° - 211°

⇒ 149°

Thus, The value of measure of RU is,

⇒ 149°

Learn more about the circle visit:

https://brainly.com/question/24810873

#SPJ1

The maps scale is 1 inch = 6 miles. This means that for every inch on the map, it represents 6 miles in real-life distance.

To determine the scale, we need to know the relationship between the distance on the map and the actual distance. In this case, the distance on the route map between Hugo's house and his work is 3 inches, and the actual distance he travels by bus is 18 miles.

To find the scale, we can set up a proportion using the given information:

(distance on the map in inches) / (actual distance in miles) = (1 inch) / (x miles)

Now, we can plug in the known values:

(3 inches) / (18 miles) = (1 inch) / (x miles)

To solve for x, we can cross-multiply:

3 inches * x miles = 18 miles * 1 inch

3x = 18

Now, divide both sides by 3:

x = 6

So, the scale of the map is 1 inch = 6 miles.

To know more about maps scale, refer to the link below:

https://brainly.com/question/29495583#

#SPJ11

The combination of these side lengths uniquely determines the shape of the triangle.

Hi! To draw a triangle with side lengths 3 inches, 5 inches, and 6 inches, make sure that the sum of any two sides is greater than the third side. In this case, 3 + 5 > 6, 3 + 6 > 5, and 5 + 6 > 3, so a triangle can be formed.

Yes, this is the only triangle you can draw using these side lengths.

The reason is that the side lengths are fixed, and according to the triangle inequality theorem, the combination of these side lengths uniquely determines the shape of the triangle.

The combination of these side lengths uniquely determines the shape of the triangle.

To know more about triangle refer here

https://brainly.com/question/2773823#

#SPJ11

The correct answer is option (d) (x, y) → (x + 1/3, y + 1/3).

The dilation is a type of transformation that changes the size of the object, but not the shape. It can be represented by a rule in which each point of the original object is multiplied or divided by a constant factor. In this case, since the center of dilation is the origin, we can find the constant factor by dividing the coordinates of the corresponding points of the two rectangles.

Let's take the point Q(x, y) in rectangle QRST and its corresponding point Q'(x', y') in rectangle Q'R'S'T'. Since the dilation is centered at the origin, we have:

x' = k * x

y' = k * y

where k is the constant factor of dilation. We can find k by dividing the corresponding sides of the rectangles. For example, the length of QR is 4 units, and the length of Q'R' is 4/3 units. Therefore, k = 4/3.

Using this value of k, we can find the coordinates of any point in rectangle QRST that corresponds to a point in rectangle Q'R'S'T'. For example, point R(6, 2) in rectangle QRST corresponds to point R'(6 + 1/3, 2 + 1/3) = (20/3, 7/3) in rectangle Q'R'S'T'.

Hence, the correct answer is (x, y) → (x + 1/3, y + 1/3).

Learn more about rectangle,

brainly.com/question/29123947

#SPJ11

The circle's x value will continue to be the same as the arc ST. So, x has a value of 40 degrees.

A circle's centre is the point from which all of the distances to the other points on the circle are equal. The radius of the circle is the measurement at issue.

Every point on a circle is a geometric shape that is equally separated from the centre.

The location of any point that is evenly separated from the fixed point known as the circle's centre can also be characterised as it.

The distance from any point on a circle to the centre is known as the radius of the circle.

To know more about arc visit:

brainly.com/question/30688993

#SPJ1

In the proportion,  the cost of 0.7kg apple is Rs.62.65 .

What is proportion?

A percentage is created when two ratios are equal to one another. We write proportions to construct equivalent ratios and to resolve unclear values. a comparison of two integers and their proportions. According to the law of proportion, two sets of given numbers are said to be directly proportional to one another if they grow or shrink in the same ratio.

Here cost of 1kg apples = 89.50

Then cost of 0.7 kg apple = x.

Now using proportion,

=> 1   = 89.50

   0.7=  x

=> x = [tex]\frac{89.50\times0.7}{1}[/tex]

=> x = 62.65.

Hence the cost of 0.7kg apple is Rs.62.65 .

To learn more about proportion refer the below link

https://brainly.com/question/13604758

#SPJ4

Therefore, the value of x to the nearest hundredth is approximately 72.73 units.

A triangle is a geometrical shape that consists of three straight sides and three angles. It is a polygon with three vertices, and the sum of its interior angles always adds up to 180 degrees. Triangles are classified based on the length of their sides and the measure of their angles. The most common types of triangles are equilateral, isosceles, and scalene, based on the length of their sides, and acute, right, and obtuse, based on the measure of their angles. Triangles have a wide range of applications in mathematics, physics, engineering, and other fields.

Here,

Therefore, in this triangle, sin(67°) = 67/x, where x is the length of the hypotenuse.

We can rearrange this equation to solve for x:

x = 67 / sin(67°)

Using a calculator, we find that sin(67°) is approximately 0.921, so:

x = 67 / 0.921

x ≈ 72.73

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

Using area formula for rectangles, we can find the new area of the rectangle to be 7350m².

The new dimensions are:

Length = 105m

Breadth = 70m

A rectangle is a quadrilateral with parallel opposite sides and equal angles. There are a lot of rectangular objects all around us. Each rectangle's two defining characteristics are its length and breadth. A rectangle's longer and shorter sides are its width and length, respectively.

Here in the question,

Dimensions of the rectangle are as follows:

Length, l = 42m.

Width, w = 28m.

Scale factor here is 1: 5/2

Now,

Let the new width be x.

The new width will be:

28/x = 1/ (5/2)

Cross multiplying:

⇒ 28 × 5/2 = x

⇒ x = 70m.

So, new width = 70m.

Now, let new length be x.

So,

42/x = 1/ (5/2)

Cross multiplying:

⇒ x = 42 × 5/2

⇒ x = 105m.

So, the new length = 105m.

Now new area will be:

70 × 105

= 7350m².

To know more about rectangles, visit:

https://brainly.com/question/20693059

#SPJ1

The length of AC in triangle ABC is 24 inches.

In triangle ABC, let point D be on side AC such that AB = BD = DC = 12 inches. We are given that the measure of angle BDC is twice the measure of angle ABD.

To find the length of AC, we can use the Law of Cosines. This law relates the lengths of the sides of a triangle to the cosine of one of its angles. In this case, we can apply the Law of Cosines to triangle ABD to find the length of AD:

AD^2 = AB^2 + BD^2 - 2 * AB * BD * cos(ABD)

Since AB = BD = 12 inches, we have:

AD^2 = 12^2 + 12^2 - 2 * 12 * 12 * cos(ABD)

AD^2 = 288 - 288 * cos(ABD)

Now, let's consider triangle BDC. We are given that the measure of angle BDC is twice the measure of angle ABD. Let's denote the measure of angle ABD as x. Therefore, the measure of angle BDC is 2x.

Since the sum of angles in a triangle is 180 degrees, we can write:

x + 2x + angle BCD = 180

3x + angle BCD = 180

angle BCD = 180 - 3x

Now, let's apply the Law of Cosines to triangle BDC to find the length of BC:

BC^2 = BD^2 + CD^2 - 2 * BD * CD * cos(BDC)

BC^2 = 12^2 + 12^2 - 2 * 12 * 12 * cos(2x)

BC^2 = 288 - 288 * cos(2x)

Since AD = DC, we have AD = 12 inches. Now we can write the equation for the total length AC:

AC = AD + DC

AC = 12 + 12

AC = 24 inches

Therefore, the length of AC in triangle ABC is 24 inches.

Learn more about triangle,

https://brainly.com/question/28470545

#SPJ11

the answer is Q1 = 27.5

Answer:

The total area of the "t" figure is 20 square units.

The figure is made up of a triangle, a square, and a rectangle.

The area of the triangle is (1/2)(base)(height) = (1/2)(4)(3) = 6 square units.

The area of the square is 4^2 = 16 square units.

The area of the rectangle is 2(4)(3) = 24 square units.

The total area of the figure is 6 + 16 + 24 = 46 square units.

However, the question asks for the area of the composite region, which is the shaded region in the figure. The shaded region is a triangle with base 4 units and height 3 units. The area of this triangle is (1/2)(base)(height) = (1/2)(4)(3) = 6 square units.

Therefore, the area of the composite region is 6 square units.

Here is a diagram of the figure with the areas of each shape labeled:

[Image of the "t" figure with the areas of each shape labeled]

Answer:

Step-by-step explanation:

I don't have enough information to answer this.

The height of the tree is approximately 20.1 feet.

To determine the height of the tree, we can use the tangent function, which relates the opposite side (the height of the tree) to the adjacent side (the length of the shadow) of a right triangle.

tan(35°) = height of tree / 35 feet shadow

Rearranging this formula, we get:

height of tree = 35 feet shadow x tan(35°)

Plugging in the given values and using a calculator, we get:

height of tree = 35 x tan(35°) ≈ 20.1 feet

Therefore, the height of the tree is approximately 20.1 feet.

Learn more about  tangent function

brainly.com/question/30034780

#SPJ11