treatment of pentanedioic (glutaric) anhydride with ammonia at elevated temperature leads to a compound of molecular formula c5h7no2. what is the structure of this product? [hint: you need to think about the reactivity not only of acid anhydrides but also of amides and carboxylic acids]
Answers
The structure of the product is drawn.
The reaction between pentanedioic anhydride and ammonia at elevated temperature is an example of amidation reaction. The product formed has a molecular formula of C₅H₇NO₂, which suggests that it has five carbon atoms, seven hydrogen atoms, one nitrogen atom, and two oxygen atoms.
The constitutional isomers with the molecular formula C₅H₇NO₂ are,
Pentanamide (also known as valeramide)
2-Aminopentanoic acid (also known as α-aminocaproic acid)
3-Aminopentanoic acid (also known as β-aminocaproic acid)
Of these three isomers, only 2-aminopentanoic acid and 3-aminopentanoic acid have two oxygen atoms. Therefore, one of these two isomers is the product of the reaction.
To distinguish between the two isomers, we need to consider the conditions of the reaction. The reaction was carried out at elevated temperature, which suggests that it is likely to be a thermal reaction. Under thermal conditions, the reaction is expected to favor the formation of the less substituted amide, which in this case is 2-aminopentanoic acid.
To know more about ammonia, here
https://brainly.com/question/15719562
#SPJ4
Related Questions
Compound t is a white crystalline solid.
naoh ca)
a neat
when a sample of t was mixed with aqueous sodium hydroxide and heated, a pungent smelling
gas was produced which turned damp red litmus paper blue. this same gas produced dense
white smoke with hydrogen chloride gas. hcl cg)
further testing of a solution of t with barium chloride solution produced a dense white precipitate
which did not dissolve when dilute hydrochloric acid was added to the mixture.
wh3
nh₃ + ball → nh y cut ba
what is the identity of compound t?
a
ammonium carbonate
b ammonium sulfate
csodium carbonate
d
sodium sulfate
Answers
The compounds A, B and C are ammonium chloride, ammonia gas and silver chloride respectively.
Ammonium chloride, is a white crystalline solid which is soluble in water. On heating with sodium hydroxide it will produce ammonia gas, which is a colorless gas and has a odor or pungent smell.
So, Ammonia gas will turn red litmus into blue as it's pH is 11.6.
When Ammonium chloride reacts with silver nitrate in presence of dilute Nitric acid , it produces Silver chloride and Ammonium nitrate
AgCl is soluble in Ammonia because it can form complexes which
makes it behave like an ion, making it soluble.
Therefore, Compound A is Ammonium chloride,
B is ammonia gas
and C is Silver chloride.
To know more about crystalline solid here
https://brainly.com/question/28287375
#SPJ4
The complete question is
A white solid A when heated with sodium hydroxide solution gives a pungent gas B which turns red litmus paper blue. The solid when dissolved in dilute nitric acid is treated with Silver nitrate solution to give white precipitate C, which is soluble in ammonia.
(A) What are the substance A, B, and C?
NASA shipped 51,300 g of water (H₂O) to the space station. How many grams of Oxygen (0₂) w
at amount of water theoretically produce? Using the balanced equation for electrolysis and mol
asses from Part A and Part B determine how many grams of oxygen (0₂) you will be able to produc
eginning with 51,300 grams of water (H₂O) (3-step grams to moles to moles to grams conversion).
Answers
Answer:Starting with 51,300 grams of water, we can theoretically produce 45,592 grams of oxygen using electrolysis, based on the balanced equation 2H₂O → 2H₂ + O₂.
Translate the following balanced chemical equation into words.
PCl5(s) + 4H2O(l) → H3PO4(aq) + 5HCl(aq)
A. Phosphorus pentachloride and water yield phosphoric acid and hydrochloric acid.
B. Phosphorus pentachloride and phosphoric acid yield water and hydrochloric acid.
C. Phosphorus pentachloride and water yield phosphorous acid and chloric acid.
D. Phosphorus hexachloride and water yield phosphoric acid and hydrochloric acid.
Answers
Translating the given balanced chemical equation into words :A.)Phosphorus pentachloride and water yield phosphoric acid and hydrochloric acid.
What is Phosphorus pentachloride?Phosphorus pentachloride and water react to yield phosphoric acid and hydrochloric acid. Balanced chemical equation shows that for every one mole of PCl₅ and four moles of H₂O that react, one mole of H₃PO₄ and five moles of HCl are produced.
Phosphorus pentachloride (PCl₅) is a chemical compound composed of one phosphorus atom and five chlorine atoms. It is yellowish-white crystalline solid that is highly reactive and can decompose violently when exposed to water or moist air.
PCl₅ is primarily used as a chlorinating agent in organic chemistry, where it is used to convert alcohols, carboxylic acids, and other functional groups into the corresponding chlorides.
To know more about PCl5, refer
https://brainly.com/question/12994231
#SPJ1
calculate the molality of a solition with 85 g of KOH added to 590. g of water
Answers
How many valence electrons does carbon have available for bonding to other atoms?
a. 2
b. 4
c. 6
d. 8
Answers
Answer:
4 valence electrons.
Explanation:
Carbon has 4 valence electrons because it is in the 14th group on the Periodic Table.
complete the table below by deciding whether a precipitate forms when aqueous solutions a and b are mixed. if a precipitate will form, enter its empirical formula in the last column. solution a solution b does a precipitate form when a and b are mixed? empirical formula of precipitate potassium sulfide iron(ii) sulfate yes no zinc sulfate iron(ii) bromide yes no barium bromide potassium acetate
Answers
By considering the solubility rules, we can determine whether a precipitate will form and its empirical formula when mixing two aqueous solutions.
The table can be completed as follows(image attached):
To determine whether a precipitate will form when solutions A and B are mixed, we need to consider the solubility rules of the compounds involved. If the product of the ions in the solution is insoluble, then a precipitate will form.
In the first case, potassium sulfide (K2S) and iron(II) sulfate (FeSO4) will react to form potassium sulfate (K2SO4) and iron(II) sulfide (FeS), which is insoluble. Thus, a precipitate will form with empirical formula FeS. In the second case, both zinc sulfate (ZnSO4) and iron(II) bromide (FeBr2) are soluble in water and will not react to form an insoluble compound. Therefore, no precipitate will form.
In the third case, barium bromide (BaBr2) and potassium acetate (KC2H3O2) will react to form barium acetate (Ba(C2H3O2)2) and potassium bromide (KBr), which is soluble. However, barium acetate is insoluble and will form a precipitate with empirical formula Ba(C2H3O2)2.
To know more about the Aqueous solutions, here
https://brainly.com/question/29987702
#SPJ4
Calculate E0, E, and ΔG for the following cell reactions (a) Mg(s) + Sn2+(aq) ⇌ Mg2+(aq) + Sn(s) where [Mg2+] = 0. 055 M and [Sn2+] = 0. 055 M
Answers
The E° for cell reaction is - 2.37 V and 2.23 V and E for cell reaction = 2.22V and ΔG = - 428.39kJ/mol.
The formula for solving the equation for given cell is as follows :
E°cell , Ecell and Δ[tex]G_{rnx}[/tex]
The standard cell potential is the potential of cell at standard condition of 1MConcentration and pressure 1 atm E°cell
calculation :
E°cell = E° cathode - E° anode it is calculated using the Nernst equation which is discussed below :
Ecell = E°cell -- [tex]\frac{RT}{nF}[/tex] 1n K = E°cell -- [tex]\frac{0.0591}{n}[/tex]log [tex]\frac{Products}{Reactants}[/tex]
Here, F is the Faraday's constant, R is the gas constant, T is the temperature, and n is the number of transferred electrons. K is the equilibrium constant.
The Gibbs free energy is the greatest work that is finished by a framework . The standard cell potential is without like energy by the recipe as follows;and F is Faraday's steady.
A system's maximum amount of work is referred to as its Gibbs free energy. The standard cell potential is connected with the free energy by the recipe as follows: Δ G = -n F Ecell
Here, E cell is cell potential
Δ G is the free energy n is the quantity of electrons moved and F is Faraday's steady.
The given net cell equation is as follows: Mg + Sn²⁺⇒ Mg²⁺ + SnOxidation :
Mg ⇒ Mg ²⁺ + 2e⁻ E⁰anode = - 2.37 V
Reduction:Sn²⁺ + 2e⁻⇒ Sn E⁰
So, cathode = - 0.14V
The standard cell potential is calculated as follows:E⁰ cell = - 0.14 V- (- 2.37 V ) = 2.23 V
The half reaction potentials for the oxidation and reduction are determined. They are subbed in the equation and the standard cell potential is determined.
Number of electrons transferred , n = 2 ,[Mg²⁺] = 0.055M , [ Sn²⁺ ] = 0.030 M The Nernst equation for reaction :
Ecell = E °cell = [tex]\frac{0.0591}{n}[/tex]log Mg ²⁺ / Sn²⁺
The cell potential for reaction is :
Ecell = 2.23V - [tex]\frac{0.0591}{2}[/tex]log[tex]\frac{0.055M}{0.030M}[/tex]= 2.22V
The values are substituted for the reaction calculated here in the Nernst equation and cell potential.
Calculation for the free energy for reaction ,
] Δ[tex]G_{rxn}[/tex] = -nFE cell
= - 2 × 96485 C/ mol ×2.22 V
= --428393J/mol × [tex]\frac{1KJ}{1000J}[/tex] = - 428.39kJ/mol
The cell potential for the response is subbed in the recipe and free energy for the response is determined
Nernst equation :
The standard electrode potential, absolute temperature, the number of electrons involved in the redox reaction, and activities (often approximated by concentrations) of the chemical species undergoing reduction and oxidation, respectively, can all be used to calculate the reduction potential of a half-cell or full cell reaction using the Nernst equation, a chemical thermodynamic relationship.
Learn more about Nernst Equation :
brainly.com/question/15237843
#SPJ4
Draw all possible lewis structures (including resonance structures for methyl azide (ch3n3 using lewis structure rules. One or more of your structures may seem unstable or unlikely; include them in your answer as long as they do not violate lewis structure rules. For each resonance structure, assign formal charges to all atoms that have formal charge. Draw all possible lewis dot structure for methyl azide. Include all hydrogen atoms and nonbonding electrons. Show the formal charges of all atoms
Answers
Structure 1:
H
|
H - C = N
|
N
|
N
Structure 2:
H
|
H - C ≡ N
|
N
|
N
Structure 3:
H
|
H - C ≡ N+
|
N-
|
N
In Structure 1, there is a double bond between the central carbon atom and one of the nitrogen atoms, and a single bond between the central carbon atom and the other nitrogen atom. In Structure 2, there is a triple bond between the central carbon atom and one of the nitrogen atoms, and a single bond between the central carbon atom and the other nitrogen atom. In Structure 3, there is a triple bond between the central carbon atom and the positively charged nitrogen atom, and a single bond between the central carbon atom and the negatively charged nitrogen atom.
All three structures satisfy the octet rule for all atoms and obey the Lewis structure rules.
For resonance structures, we can observe that Structures 1 and 2 are actually resonance structures of each other, as the double and triple bonds can be interchanged without violating any valence electron rules. Therefore, we can draw a hybrid structure that represents the average of these two resonance structures:
Hybrid Structure:
H
|
H - C = N ⇌ H - C ≡ N
|
N
|
N
In this hybrid structure, the double and triple bonds have equal bond order and the formal charges on all atoms are as follows:
Carbon: 0
Nitrogen (single bond): 0
Nitrogen (double/triple bond): 0
Hydrogen: +1
Note that the formal charge on the carbon atom is zero in all structures, and the formal charges on the nitrogen and hydrogen atoms are all either zero or +1, which are the most stable formal charges for these atoms.
2) If a solid line represents a covalent bond and a dotted line represents intermolecular attraction, which of the choices shows a hydrogen bond?
H−H
H3N⋅⋅⋅⋅⋅⋅H−O−H
H
3
N
⋅
⋅
⋅
⋅
⋅
⋅
H
−
O
−
H
H4C⋅⋅⋅⋅⋅⋅H−F
H
4
C
⋅
⋅
⋅
⋅
⋅
⋅
H
−
F
H2O⋅⋅⋅⋅⋅⋅H−CH3
Answers
H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.
A hydrogen bond is a type of intermolecular attraction that occurs when a hydrogen atom is bonded to an electronegative atom such as nitrogen, oxygen, or fluorine, and it is attracted to another electronegative atom in a nearby molecule. This attraction is represented by a dotted line.
Looking at the choices provided, the only option that shows a hydrogen bond is H3N⋅⋅⋅⋅⋅⋅H−O−H. In this molecule, the hydrogen atom in the H−O−H group is bonded to the highly electronegative oxygen atom, and it forms a hydrogen bond with the lone pair of electrons on the nitrogen atom in the H3N group.
The dotted line between the H and N represents the hydrogen bond.
In contrast, the other options do not show a hydrogen bond. H−H represents a simple covalent bond between two hydrogen atoms, while H4C⋅⋅⋅⋅⋅⋅H−F represents a covalent bond between a carbon atom and a fluorine atom, with no electronegative atoms capable of forming a hydrogen bond. H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.
To know more about intermolecular attraction, visit:
https://brainly.com/question/10626096#
#SPJ11
calculate the volume of 0.150 m hydrochloric acid required to completely neutralize 25.0 ml of 0.250 m iron (iii) hydroxide.
Answers
0.125 L HCl solution, or 125 mL HCl solution (Depending on the units requested)
Explanation:Major steps:
1. Determine the chemical formulas for each compound
2. Write the unbalanced chemical equation, and balance it
3. Use dimensional analysis to determine the amount of acid needed.
Step 1. Determine the chemical formulas for each compound
hydrochloric acid is [tex]HCl[/tex]. This is from memorization of nomenclature, or consulting a resource.
Iron (iii) hydroxide is [tex]Fe(OH)_3[/tex] . This is from memorization of nomenclature, knowing that the charge on "hydroxide" is a negative 1, and that 3 hydroxide ions will be needed to balance the charge with a Iron (iii), or consulting a resource.
Step 2. Write the unbalanced chemical equation, and balance it
For "neutralization reactions", an "Acid" and a "Base" will combine to form Water and a "salt".
Unbalanced chemical equation:
[tex]HCl + Fe(OH)_{3} \rightarrow H_{2}O+ FeCl_{3}[/tex]
Balance the equation by increase the number of "Chlorines" on the left, and the number of "hydroxides" (trapped in the 'water') on the right.
Balanced chemical equation:
[tex]3HCl + Fe(OH)_{3} \rightarrow 3H_{2}O+ FeCl_{3}[/tex]
Step 3. Use dimensional analysis to determine the amount of acid needed.
Knowing we have 25.0mL of Iron (iii) hydroxide solution (in milliliters), we first convert to Liters (since concentrations for "molarity" are measured in moles per Liter).
Then convert to convert to moles of Iron(iii) hydroxide using the solution's concentration.
Convert to moles of hydrochloric acid using the mole ratio from the balanced chemical equation.
Lastly convert to volume of the hydrochloric acid solution using that solution's concentration:
[tex]\dfrac{25.0 \text{ mL } Fe(OH)_3 \text{ solution}}{1} * \dfrac{1 \text{ L }}{1000 \text{ mL }} * \dfrac{0.25 \text{ mol } Fe(OH)_3 }{1 \text{ L } Fe(OH)_3 \text{ solution}} * \dfrac{3 \text{ mol } HCl }{1 \text{ mol } Fe(OH)_3 } * \dfrac{1 \text{ L } HCl \text{ solution} }{0.150 \text{ mol } HCl }=[/tex]
[tex]=0.125 \text{ L } HCl \text{ solution}[/tex]
If the requested answer should be measured in milliliters, one last conversion will yield the answer:
[tex]\dfrac{0.125 \text{ L } HCl \text{ solution}}{1} * \dfrac{1000 \text{ mL }}{1 \text{ L }} = 125 \text{ mL } HCl \text{ solution}[/tex]
Observe that the original measurements use 3 significant figures, so each answer should use 3 significant figures (both answers do).
How dose the angle of a light beam affect the intensity and the amount of light reflected or transmitted?
Answers
The angle of a light beam affects the intensity and the amount of light reflected or transmitted through a process known as the "angle of incidence." When a light beam strikes a surface, the angle between the incoming light beam and the surface is called the angle of incidence. This angle plays a crucial role in determining the amount of light reflected or transmitted.
When the angle of incidence is small (light beam nearly perpendicular to the surface), more light is transmitted through the surface, and less is reflected. As the angle of incidence increases (light beam more parallel to the surface), the amount of light reflected also increases, while the intensity of the transmitted light decreases.
This phenomenon occurs due to the interaction of light with the surface material, which can either absorb, transmit, or reflect the incoming light, depending on the angle of incidence and the material's properties. The angle at which the light beam is incident on the surface also affects the intensity of the reflected light.
At a specific angle, called the "critical angle," the light beam is no longer transmitted but is entirely reflected, a phenomenon called "total internal reflection." The critical angle depends on the refractive indices of the two materials at the interface. When the angle of incidence is greater than the critical angle, all the light is reflected, and none is transmitted.
In summary, the angle of a light beam significantly influences the intensity and the amount of light reflected or transmitted by a surface. The angle of incidence determines the amount of light reflection, with a smaller angle leading to more transmission and a larger angle leading to increased reflection. The critical angle, in particular, plays a crucial role in determining the behavior of the light beam at the surface.
To know more about angle of a light beam refer here
brainly.com/question/29254330#
#SPJ11
What is the volume of a 2. 00 M solution that contains 3. 75 moles of solute?
Answers
The volume of a 2.00 M solution that contains 3.75 moles of solute can be calculated using the formula V = n/C, where V is the volume of the solution, n is the number of moles of solute, and C is the concentration of the solution in units of M (moles per liter).
Plugging in the given values, we get V = 3.75 moles / 2.00 M = 1.88 L. Therefore, the volume of the solution is 1.88 liters. In 100 words, the volume of a solution can be determined by knowing the amount of solute present and the concentration of the solution.
This is because the concentration of a solution is defined as the amount of solute dissolved in a given volume of solution. Using the formula for concentration, we can determine the amount of solute dissolved in a given volume of solution.
Then, by rearranging the formula to solve for volume, we can determine the volume of the solution required to dissolve a specific amount of solute.
to know more about concentration refer here
https://brainly.com/question/13872928#
#SPJ11
If 44. 0 grams of sodium reacts with 10. 0 grams of chlorine gas, how many grams of sodium chloride could potentially be formed?
2 na(s) + cl2(g) ⟶2 nacl(s)
Answers
If 44.0 grams of sodium reacts with 10.0 grams of chlorine gas, 54.0 grams of sodium chloride could potentially be formed in the reaction: 2 Na(s) + Cl₂(g) ⟶ 2 NaCl(s).
1. Calculate the moles of sodium and chlorine:
- moles of Na = mass (g) / molar mass = 44.0 g / 22.99 g/mol = 1.91 mol
- moles of Cl₂ = mass (g) / molar mass = 10.0 g / 70.90 g/mol = 0.141 mol
2. Determine the limiting reactant by dividing the moles of each reactant by their stoichiometric coefficients:
- Na: 1.91 mol / 2 = 0.955
- Cl₂: 0.141 mol / 1 = 0.141
3. Since the value for Cl₂ is lower, chlorine gas is the limiting reactant.
4. Calculate the moles of NaCl produced using the stoichiometry of the reaction:
- moles of NaCl = moles of Cl₂ × (2 moles of NaCl / 1 mole of Cl₂) = 0.141 × 2 = 0.282 mol
5. Calculate the mass of NaCl produced:
- mass of NaCl = moles × molar mass = 0.282 mol × 58.44 g/mol = 54.0 g
To know more about limiting reactant click on below link:
https://brainly.com/question/14225536#
#SPJ11
What is the total number of moles, to the nearest tenth, of solute contained in 0. 50 liter of 3. 0 M HCl?
Answers
The total number of moles, to the nearest tenth, of solute contained in 0. 50 liter of 3. 0 M HCl is 1.5 moles.
To determine the total number of moles of solute in a solution, we need to use the formula:
moles of solute = Molarity x volume in liters
Given that we have a 0.50 L solution of 3.0 M HCl, we can simply substitute the values in the formula to obtain:
moles of HCl = 3.0 mol/L x 0.50 L = 1.5 moles of HCl
Therefore, there are 1.5 moles of HCl in 0.50 liters of 3.0 M HCl solution. We can round this to the nearest tenth, giving us a final answer of 1.5 moles of HCl.
To know more about the moles of solute refer here :
https://brainly.com/question/31039725#
#SPJ11
How many grams of CaCO3 are produced when 98. 2 grams of CaO are reacted with an excess of Co2 according to the equation provided? CaO+CO2-->CaCO3
Answers
175.16 grams of[tex]CaCO3[/tex]will be produced when 98.2 grams of [tex]CaO[/tex] are reacted with an excess of [tex]CO2[/tex].
The balanced chemical equation for the reaction between[tex]CaO and CO2[/tex]is:
[tex]CaO + CO2 → CaCO3[/tex]
According to the equation, one mole of[tex]CaO[/tex] reacts with one mole of [tex]CO2[/tex]to produce one mole of [tex]CaCO3[/tex].
The molar mass of [tex]CaO[/tex]is 56.08 g/mol, and the molar mass of [tex]CO2[/tex] is 44.01 g/mol. Therefore, the number of moles of [tex]CaO[/tex] present in 98.2 g can be calculated as:
moles of [tex]CaO[/tex] = mass / molar mass = 98.2 g / 56.08 g/mol = 1.75 mol
Since the reaction is with an excess of [tex]CO2[/tex], all the [tex]CaO[/tex]will react. Therefore, the number of moles of CaCO3 produced will be the same as the number of moles of [tex]CaO[/tex] used, which is 1.75 mol.
The molar mass of [tex]CaCO3[/tex]is 100.09 g/mol. Therefore, the mass of [tex]CaCO3[/tex] produced can be calculated as:
mass of [tex]CaCO3[/tex] = moles of [tex]CaCO3[/tex] × molar mass = 1.75 mol × 100.09 g/mol = 175.16 g
To know more about balanced chemical equation refer to-
https://brainly.com/question/28294176
#SPJ11
A quantity of gas is at a temperature of 20°C, a pressure of 760 torr and occupies a volume of 2. 00 L. If the pressure is changed to 730 torr, what will be the new volume? Assume that there is no temperature change
Answers
The new volume of the gas, assuming constant temperature and a change in pressure from 760 torr to 730 torr, is 2.09 L.
Using the Boyle's Law equation,
P₁V₁ = P₂V₂,
where P is pressure and V is volume, we can solve for V₂ by plugging in the given values in the equation:
(760 torr)(2.00 L) = (730 torr)(V₂)
Solving for V₂, we get:
V₂ = (760 torr)(2.00 L) / (730 torr) = 2.09 L
Therefore, the new volume of the gas is 2.09 L.
This result makes sense because according to Boyle's Law, as pressure decreases, volume increases proportionally, assuming a constant temperature.
To know more about Boyle's Law, refer here:
https://brainly.com/question/21184611#
#SPJ11
explain how electrical conductivity can be used to distinguish between magnesium oxide and silicon oxide
Answers
Magnesium metal will conduct electricity via mobile electrons whether it is in the solid or liquid state.
Magnesium oxide will not conduct electricity in the solid state as they are no mobile charge carriers.
Molten (liquid) magnesium oxide has mobile ions and these can transfer electrons via mobile ions. This is electrolysis and the compound is turned back into its elements (magnesium and oxygen).
Let say that I want to get my mixture to a certain pH but I add too much water to my solution.Can I just add the same volume of my substance as the water I added back into the mixture to get my initial pH?
Answers
To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.
pH is a measure of the acidity or basicity of a solution. It is a logarithmic scale ranging from 0 to 14, where a pH of 7 is considered neutral, below 7 is acidic, and above 7 is basic.
If you add too much water to your solution, it will dilute the concentration of the substance in the mixture and may change the pH. To get the initial pH, you cannot simply add the same volume of the substance as the water you added back into the mixture.
This is because the amount of substance required to achieve the desired pH is dependent on the concentration of the substance in the mixture.
To determine the amount of substance required to achieve the desired pH, you need to calculate the new concentration of the substance in the diluted solution. This can be done using the formula:
C1V1 = C2V2
Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
Once you have calculated the new concentration, you can then add the required amount of substance to the diluted solution to achieve the desired pH.
In summary, adding too much water to a solution can change the pH, and adding the same volume of substance as the water added will not restore the initial pH. To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.
To know more about pH, visit:
https://brainly.com/question/15289741#
#SPJ11
Nitrogen oxide (NO) has been found to be a key component in many biological processes. It also can react with oxygen to give the brown gas NO2. When one mole of NO reacts with oxygen, 57. 0 kJ of heat are evolved. What is ΔH when 8. 00 g of nitrogen oxide react?
NO(g) + ½O2(g) → NO2(g) ΔH = –57. 0 kJ
Answers
The enthalpy change when 8.00 g of nitrogen oxide react is -15.162 kJ for the given chemical reaction.
The molar mass of NO = 30.01 g/mol
8.00 g of NO = 8.00 g / 30.01 g/mol
8.00 g of NO = 0.266 mol of NO
Heat rejection = 57. 0 kJ
Here, 1 mole of NO reacts with 1/2 mole of Oxygen to produce 1 mole of [tex]NO_{2}[/tex]
The amount of Oxygen required for 0.266 mol of NO is calculated as:
The amount of Oxygen = 0.266 mol NO x (1/2) mol [tex]O_{2}[/tex] / 1 mol NO
The amount of Oxygen required = 0.133 mol [tex]O_{2}[/tex]
The heat reaction will be:
-57.0 kJ/mol x 0.266 mol NO = -15.162 kJ
Therefore, we can conclude that the enthalpy change is -15.162 kJ.
To learn more about Nitrogen dioxide
https://brainly.com/question/21173133
#SPJ4
Balance the Following Equations:
Instruction: While balancing equation write the physical state of
reactants and products as well as any reaction conditions.
1) CuSO4 + KI →Cu2I2 + K2SO4 + I2
2) NH3 + O2 →NO + H2O
3)Fe2O3 + CO → Fe + CO2
4) Cu + AgNO3 → Cu(NO3)2 + Ag
5) Pb(NO3)2 + H2SO4 → PbSO4 + HNO3
6) CaCO3 + HCl → CaCl2 + H2O(l) + CO2
7)MnO2 + HCl → MnCl2 + H2O + Cl2
I will report any comments that are not appropriate for the question asked or simply typed something for the points. Only answer if u know
Answers
While balancing equation write the physical state of reactants and products as well as any reaction conditions.
What is reactants ?Reactants are the substances that are present at the start of a chemical reaction. They are typically the substances that are used up during the reaction and are converted into different products. Reactants are usually written on the left side of a chemical equation, while the products are written on the right side. Reactants are essential components of any chemical reaction and are essential in order for the reaction to take place. Reactants are also known as substrates or starting materials.
Balancing the Following Equations:
1) CuSO4(s) + 2KI(aq) → Cu2I2(s) + K2SO4(aq) + I2(g)
2) 2NH3(g) + O2(g) → 2NO(g) + 2H2O(g)
3) 3Fe2O3(s) + 4CO(g) → 6Fe(s) + 3CO2(g)
4) Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s)
5) 2Pb(NO3)2(aq) + H2SO4(aq) → PbSO4(s) + 2HNO3(aq)
6) CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
7) 2MnO2(s) + 4HCl(aq) → 2MnCl2(aq) + 2H2O(l) + Cl2(g)
To learn more about reactants
https://brainly.com/question/26283409
#SPJ4
why do you think the h-bonds only last a short time before breaking and reforming?
Answers
Answer:
because they are poorly made
Explanation:
A sample of bromine gas occupies 2. 65 L at 1. 20 atm. What pressure (in kPa) would this sample of gas exert in 1. 50L container at the same temperature? show work
ASAP PLEASE
Answers
We can use the ideal gas law to calculate the pressure of the bromine gas in the 1.5 L container. The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Since we know the temperature and the volume, we can rearrange the ideal gas law to solve for P, the pressure. We can use the pressure and volume from the first container to calculate the number of moles. Plugging in all of the known values, we get:
P1V1 = nRT
n = P1V1/RT
P2 = (P1V1/RT) * (V2/V1)
Using the values from the question, we get:
P2 = (1.20 atm * 2.65 L)/(0.08206 L·atm·mol-1·K-1 * 298 K) * (1.50 L/2.65 L)
This gives us a pressure of 1.04 atm in the 1.5 L container, which is equal to 1040 kPa.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
What is the normal boiling point of a 3.45mol solution of kbr that has density of 1.10gml?(ka for h2o is 0.512°c kg/mole)
Answers
The normal boiling point of the 3.45 mol solution of KBr is 104.7384°C.
The normal boiling point of a 3.45 mol solution of KBr with a density of 1.10 g/mL can be calculated using the formula:
ΔT = Kb * molality
where ΔT is the boiling point elevation, Kb is the molal boiling point elevation constant for water (0.512°C kg/mol), and molality is the number of moles of solute per kilogram of solvent.
First, we need to calculate the mass of the solvent (water) required to dissolve 3.45 mol of KBr. The molar mass of KBr is 119 g/mol, so 3.45 mol of KBr would weigh 409.55 g.
Since the density of the solution is given as 1.10 g/mL, the volume of the solution is:
V = m / ρ = 409.55 g / 1.10 g/mL = 372.32 mL
So, the mass of the water is:
mH2O = V * ρH2O = 372.32 mL * 1 g/mL = 372.32 g
The molality of the solution can be calculated as follows:
molality = moles of solute / mass of solvent (in kg) = 3.45 mol / 0.37232 kg = 9.27 mol/kg
Substituting the values in the formula for boiling point elevation:
ΔT = 0.512°C kg/mol * 9.27 mol/kg = 4.7384°C
The normal boiling point of pure water is 100°C, so the boiling point of the KBr solution would be:
Boiling point = 100°C + ΔT = 100°C + 4.7384°C = 104.7384°C
To know more about boiling point, refer here:
https://brainly.com/question/14771622#
#SPJ11
If you perform this reaction with 5. 00 g of MnO2 and 5. 00 g of H2SO4, how many grams of Mn(SO4)2 will form?
MnO2 + 2H2SO4 → Mn(SO4)2 + 2H2O
Molar Masses
MnO2= 86. 9368 g/mol
H2SO4= 98. 0785 g/mol
Mn(SO4)2= 247. 0632 g/mol
H2O= 18. 015 g/mol
a)6. 30 g
b)2. 50 g
c)14. 2 g
d)9. 81 g
Answers
When, we perform a reaction with 5. 00 g of MnO₂ and 5. 00 g of H₂SO₄, then, 6.30 g of Mn(SO₄)₂ will be formed. Option, A is correct.
To solve this problem, we need to use stoichiometry to calculate the amount of Mn(SO₄)₂ formed from the given amount of MnO₂ and H₂SO₄.
First, we calculate number of moles of each reactant;
moles of MnO₂ =5.00 g / 86.9368 g/mol
= 0.0574 mol
moles of H₂SO₄ = 5.00 g / 98.0785 g/mol
= 0.0509 mol
From the balanced chemical equation, we can see that 1 mole of MnO₂ reacts with 2 moles of H₂SO₄ to produce 1 mole of Mn(SO₄)₂. Therefore, the limiting reactant is H₂SO₄, since it is present in a smaller amount than what is required to react with all of the MnO₂.
The amount of Mn(SO₄)₂ formed is limited by the amount of H₂SO₄, so we can calculate the amount of Mn(SO₄)₂ formed based on the number of moles of H₂SO₄;
moles of Mn(SO₄)₂ = 0.0509 mol H₂SO₄ × (1 mol Mn(SO₄)₂ / 2 mol H₂SO₄) = 0.0255 mol Mn(SO₄)₂
Finally, we can calculate the mass of Mn(SO₄)₂ formed using its molar mass;
mass of Mn(SO₄)₂ = 0.0255 mol × 247.0632 g/mol
= 6.307 g
Therefore, total 6.30 g of Manganese(II) sulfate will form.
Hence, A. is the correct option.
To know more about Manganese(II) sulfate here
https://brainly.com/question/8695145
#SPJ4
Consider the chemical equation for the combustion of ammonia: 4NH3(g) + 7O2(g) → 4NO2(g) + 6H2O(g) Which statement provides the correct and standard interpretation of the chemical equation in terms of the volume of gases at STP? A. 4 L of NH3(g) react with 7 L of O2(g) to produce 4 L of NO2(g) and 6 L of H2O(g). B. 12 L of NH3(g) react with 14 L of O2(g) to produce 8 L of NO2(g) and 6 L of H2O(g). C. 22.4 L of NH3(g) react with 22.4 L of O2(g) to produce 22.4 L of NO2(g) and 22.4 L of H2O(g). D. 89.6 L of NH3(g) react with 156.8 L of O2(g) to produce 89.6 L of NO2(g) and 134.4 L of H2O(g).
Answers
The correct interpretation is 89.6 L of [tex]NH_{3}[/tex](g) react with 156.8 L of [tex]O_{2}[/tex](g) to produce 89.6 L of [tex]NO_{2}[/tex](g) and 134.4 L of [tex]H_{2} O[/tex](g).
What is the correct interpretation?We know that one mole of a gas does occupy 22.4 L. We can now use this to obtain the number of volumes of the gas based on the stoichiometric coefficient that has been given in the problem.
Molar volume of a gas refers to the volume occupied by one mole of a gas at a specific temperature and pressure. This value is useful in many applications of chemistry, such as in stoichiometric calculations and the determination of gas densities.
Using the stoichiometric coefficients we can see that the volume of the gases are;
Ammonia - 89.6 L
Oxygen - 156.8 L
Nitrogen dioxide - 89.6 L
Water - 134.4 L
Learn more about molar volume:https://brainly.com/question/29884686
#SPJ1
The concentration of NO3- ions in 0. 25 M Ti(NO3)4(aq) is???
Answers
The compound Ti(NO3)4 dissociates in water as:
Ti(NO3)4 → Ti^4+ + 4 NO3^-
This means that each formula unit of Ti(NO3)4 produces 4 nitrate ions (NO3^-) in solution.
Therefore, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is:
0.25 M Ti(NO3)4 × 4 NO3^- ions / 1 Ti(NO3)4 formula unit = 1.00 M NO3^- ions
So, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is 1.00 M.
To know more about dissociates refer here
https://brainly.com/question/30983331#
#SPJ11
What mass in grams of sucrose must be dissolved in 2000 grams of water to make a 0. 1m solution?
Answers
We need to dissolve 6.85 grams of sucrose in 2000 grams of water to make a 0.1 M solution.
To calculate the mass of sucrose needed to make a 0.1 molar solution in 2000 grams of water, we need to use the formula:
[tex]m = n *M * MW[/tex]
Step 1: Calculate the number of moles of sucrose needed
Molarity (M) = 0.1 mol/L
volume of solution = 2000 grams of water ÷ density of water = 2000 mL
We need to calculate the number of moles of sucrose that would be present in 2000 mL of a 0.1 M solution:
moles of solute (n) = [tex]M * V = 0.1 mol/L *2.0 L = 0.2 moles[/tex]
Step 2: Calculate the mass of sucrose needed
Molecular weight of sucrose is 342.3 g/mol.
We can use the formula:
[tex]m = n * M * MW \\m = 0.2 moles *0.1 mol/L * 342.3 g/mol = 6.85 g[/tex]
To know more about Molecular weight, here
brainly.com/question/18948587
#SPJ4
Calculate the heat energy transferred to 2. 3g of copper, which has a specific heat of 0. 385 J/g·°C, that is heated from 23. 0°C to 174. 0°C. (Enter the answer rounded to two decimal places with a space between the number and unit, ex. : 145. 23 J)
Answers
The heat energy transferred to the copper can be calculated using the formula:
Q = m × c × ΔT
where Q is the heat energy transferred, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.
Substituting the given values:
m = 2.3 g
c = 0.385 J/g·°C
ΔT = 174.0°C - 23.0°C = 151.0°C
Q = 2.3 g × 0.385 J/g·°C × 151.0°C = 131.38 J
Therefore, the heat energy transferred to 2.3 g of copper is 131.38 J.
To know more about transferred refer here
https://brainly.com/question/31945253#
#SPJ11
Properties and Uses of Unsaturated Hydrocarbons
Project: Communicating Design Details
Active student guide
Answers
Answer:
Welcome to the project on communicating design details for the properties and uses of unsaturated hydrocarbons. This project aims to enhance your understanding of the characteristics and applications of unsaturated hydrocarbons.
Here are the steps to complete this project:
Step 1: Research
Research the different types of unsaturated hydrocarbons, including alkenes and alkynes. Find out their general properties, such as their reactivity, flammability, and solubility. Also, identify their uses in various industries, such as plastics, rubber, and fuel.
Step 2: Create a Design
Using your research findings, create a design to visually communicate the properties and uses of unsaturated hydrocarbons. You can use tools like Canva, PowerPoint, or other design software to create infographics, posters, or slideshows.
Step 3: Incorporate Key Information
Incorporate the key information you gathered in step 1 into your design. Make sure to include the following details:
Definitions of unsaturated hydrocarbons, alkenes, and alkynes
Properties of unsaturated hydrocarbons, including reactivity, flammability, and solubility
Applications of unsaturated hydrocarbons in various industries, such as plastics, rubber, and fuel
Examples of unsaturated hydrocarbons, such as ethene and propene for alkenes, and ethyne for alkynes
Step 4: Review and Refine
Review your design and refine it to make sure it effectively communicates the properties and uses of unsaturated hydrocarbons. Check for spelling and grammar errors, and ensure that the information is accurate and easy to understand.
Step 5: Present Your Design
Present your design to your class or teacher, and explain the properties and uses of unsaturated hydrocarbons. You can also invite feedback and questions to enhance your understanding of the topic.
In conclusion, the properties and uses of unsaturated hydrocarbons are essential for many industries. Through this project, you will gain a better understanding of unsaturated hydrocarbons and develop your communication skills to effectively present your findings. Good luck!
Explanation:
Answer:
Explanation:
The three types of unsaturated hydrocarbons is alkynes, alkenes, and aromatic hydrocarbons. Which is composed of alkynes? acetylene. brainlist
2 C12H26 + 37 O2 → 24 CO2 + 26 H2O
If 4. 2105 moles of CO2 are produced, how many moles of C12H26 were reacted?
Answers
Approximately 0.35175 moles of C₁₂H₂₆ were reacted to produce 4.2105 moles of CO₂.
To find the moles of C₁₂H₂₆ that reacted to produce 4.2105 moles of CO₂, you can use the stoichiometry of the balanced chemical equation: 2 C₁₂H₂₆ + 37 O₂ → 24 CO₂ + 26 H₂O.
Step 1: Identify the mole-to-mole ratio between C₁₂H₂₆ and CO₂ in the balanced equation.
In this case, the ratio is 2 moles of C₁₂H₂₆ to 24 moles of CO₂.
Step 2: Set up a proportion to find the moles of C₁₂H₂₆.
(2 moles C₁₂H₂₆) / (24 moles CO₂) = (x moles C₁₂H₂₆) / (4.2105 moles CO₂)
Step 3: Solve for x, which represents the moles of C₁₂H₂₆.
x moles C₁₂H₂₆ = (2 moles C₁₂H₂₆) * (4.2105 moles CO₂) / (24 moles CO₂)
Step 4: Calculate the value of x.
x = (2 * 4.2105) / 24
x ≈ 0.35175
Learn more about moles at https://brainly.com/question/15356425
#SPJ11