two riders on bicycles, 100 miles apart. o each of these series. o begin traveling toward each other at the same time, one traveling at 10 miles a) acbdfe gal per hour and the other at is miles per hour. a fly named paul revere begins b) b~dwf fly~ng between the bicycles, starting from the front wheel of the slower c) h~f~dc~ beycle. if the fly travels at 20 miles per hour flying back and forth between 2 adam dropped a rubber ball from a bicycles, being able to reverse o window 40 feet above the sidewalk. directions without losing any time. how the ball always bounces half of the far will paul revere travel before the height that it drops. how far will the ball bicycles meet?

One material resource that is potentially renewable if managed well is wood.

Wood can be obtained from trees, which are a renewable resource if they are harvested and replanted in a sustainable manner.

Sustainable forest management practices ensure that forests are used in a way that meets the needs of the present without compromising the ability of future generations to meet their own needs.

Wood is used for various purposes, such as construction, furniture, paper, and energy production. By managing forests well, we can ensure a continuous supply of wood for these purposes.

To know more about renewable resource refer here

https://brainly.com/question/19604560#

#SPJ11

The electron density of a conducting wire made of manganese can be calculated by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom.

To determine the electron density of a wire made of manganese, we need to know the number of manganese atoms per unit volume and the number of free electrons per manganese atom. The electron density is defined as the number of free electrons per unit volume of the material.

Assuming the wire is made entirely of manganese, we can calculate the number of manganese atoms per unit volume using the density of manganese, which is 7.43 g/cm³. This can be converted to atoms/cm³ using the atomic weight of manganese, which is 54.94 g/mol, and Avogadro's number.

Next, we need to know the number of free electrons per manganese atom, which is given as 3 in the problem statement. Finally, we can calculate the electron density by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom.

In summary, the electron density of a conducting wire made of manganese can be calculated by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom. This requires knowledge of the density of manganese and the number of free electrons per atom.

To know more about density refer here:

https://brainly.com/question/29359462#

#SPJ11

3. If the mass is doubled, then acceleration will be halved. If both the net force and the mass are doubled, the acceleration will be unchanged.

4. If we reduce the length of the string by half then the time period will be ✓2 of the initial time period

The observation that individuals from separate species cannot mate to produce offspring is a guideline for identifying distinct species. This criterion is known as the biological species concept.

The biological species concept defines a species as a group of interbreeding organisms that are reproductively isolated from other groups. In other words, individuals within a species can mate and produce viable, fertile offspring, while individuals from different species cannot.

The biological species concept has some limitations. For example, it cannot be applied to asexual organisms or fossils. Additionally, some species can interbreed and produce hybrid offspring, such as the mule, which is a hybrid of a horse and a donkey.

However, these hybrids are often sterile and cannot produce viable offspring of their own, which reinforces the concept that individuals from separate species cannot mate to produce offspring.

Overall, the biological species concept is a useful guideline for identifying distinct species and understanding their evolutionary relationships. It emphasizes the importance of reproductive isolation and genetic divergence in defining separate groups of organisms.

To know more about species refer here:

https://brainly.com/question/29912614#

#SPJ11

The weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.

The weight of the satellite is given by the formula W = mg, where m is the mass of the satellite and g is the gravitational field strength at its position.

Since the gravitational field strength at the height of the satellite’s orbit is one quarter of its value on the surface of the Earth, we have

g = (1/4) x 10 N/kg = 2.5 N/kg.

Substituting the given values, we get W = 20 kg x 2.5 N/kg = 50 N.

The weight of the satellite is the gravitational force that acts on it due to the Earth’s gravitational field. This force depends on the mass of the satellite and the gravitational field strength at its position. The gravitational field strength varies with the distance from the Earth’s center, and it decreases as the distance increases.

The weight of the satellite is less than its mass because it is in freefall around the Earth, and it experiences a centripetal force due to the gravitational attraction of the Earth. This centripetal force exactly balances the gravitational force, so the satellite remains in orbit.

In summary, the weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.

The weight of the satellite depends on its mass and the gravitational field strength at its position, and it is less than its mass because of the centripetal force that balances the gravitational force and keeps the satellite in orbit.

To know more about mass refer here:

https://brainly.com/question/18064917#

#SPJ11

The static shock is caused by the transfer of electrons between surfaces, creating an electric charge buildup that ionizes air molecules, resulting in a spark. Electrons and ions are the subatomic particles involved.

When a person experiences a static shock, it is due to the buildup of excess electric charge on the surface of their body. This excess charge is caused by the transfer of electrons between two surfaces that come into contact and then separate. The transfer of electrons causes an imbalance of charges, resulting in a buildup of static electricity.

The electric charge buildup creates an electric field that can be strong enough to ionize air molecules. This ionization creates a plasma, which is a gas made up of ionized particles. The plasma channels the electric charge from the person's body to the surrounding air, creating a spark that we see as a static shock.

The subatomic particles involved in this process are electrons and ions. Electrons are negatively charged subatomic particles that are transferred between surfaces to create a buildup of static electricity. Ions are atoms or molecules that have gained or lost electrons, resulting in a positive or negative charge.

In summary, a static shock occurs due to the transfer of electrons between surfaces, creating an imbalance of electric charge on the person's body.

This electric charge buildup ionizes air molecules, creating a plasma that channels the electric charge to the surrounding air, resulting in a spark that we see as a static shock. The subatomic particles involved in this process are electrons and ions.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

A flywheel of mass 3. 0g consist of a flat uniform disc of radius 0. 40m. It pivots about central axis perpendicular to its plane, moment of inertia: 2.4 x 10⁻⁴ kg m².

A) To calculate the moment of inertia of a flat uniform disc, we use the formula: I = (1/2) * M * R², where I is the moment of inertia, M is the mass, and R is the radius.

Given the flywheel's mass (3.0g) and radius (0.40m), first convert the mass to kilograms: 3.0g = 0.003 kg. Then, plug the values into the formula: I = (1/2) * 0.003 kg * (0.40m)².

The moment of inertia of the flywheel is approximately 2.4 x 10⁻⁴ kg m².

B) When a torque of 6.8 Nm acts on the flywheel, it causes angular acceleration, which can be calculated using the formula: τ = I * α, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.

Rearrange the formula to find α: α = τ / I. Plugging in the values, we get: α = 6.8 Nm / (2.4 x 10⁻⁴ kg m²). The angular acceleration of the flywheel is approximately 2.83 x 10⁻⁴ rad/s². This means the flywheel will experience a significant increase in angular velocity due to the applied torque.

To know more about moment of inertia, refer here:

https://brainly.com/question/15246709#

#SPJ11

The frequency of the first harmonic played by the instrument is approximately 990.7 Hz.

The frequency of the first harmonic played by the instrument can be calculated using the formula:

f = v / (2L)

where f is the frequency, v is the speed of sound in the test tube, and L is the length of the air column in the test tube.

The speed of sound in test tube is, 340 m/s.

In this case, L = 17.2 cm = 0.172 m. Substituting the given values into the formula, we get:

f = 340 m/s / (2 * 0.172 m)

f = 990.7 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

The force exerted on the 0.04 kg arrow, which accelerated at 7,000 m/s² to reach a speed of 60.0 m/s, is 280 N.

To calculate the force exerted on the arrow, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = m*a). In this case, the mass of the arrow (m) is 0.04 kg, and its acceleration (a) is 7,000 m/s².

Step 1: Identify the mass (m) and acceleration (a) of the arrow.
m = 0.04 kg
a = 7,000 m/s²

Step 2: Apply Newton's second law of motion (F = m*a) to calculate the force (F).
F = 0.04 kg * 7,000 m/s²

Step 3: Multiply the mass and acceleration values to obtain the force.
F = 280 N

Therefore, the force exerted on the arrow is 280 Newtons.

Know more about Newton's second law of motion click here:

https://brainly.com/question/27712854

#SPJ11

The image produced by a concave mirror when an object is placed at its center of curvature is located at the center of curvature. Option C is correct.

When an object is placed at the center of curvature of a concave mirror, the reflected light rays converge and intersect at the center of curvature. As a result, a real and inverted image of the object is formed at the same location as the object itself, which is the center of curvature.

It is important to note that the image formed by a concave mirror when an object is placed between the center of curvature and the focal point is real, inverted, and located beyond the center of curvature. When the object is placed at the focal point, the reflected light rays become parallel, and no image is formed. Finally, when the object is placed between the mirror and the focal point, the image formed is virtual, upright, and located behind the mirror. Option C is correct.

To know more about the Concave mirror, here

https://brainly.com/question/14351301

#SPJ4

The Andromeda Galaxy distance is approximately 2.52 million light-years away from us.

The Andromeda Galaxy (M31) is indeed similar to our own Milky Way galaxy, but slightly larger with a linear diameter of 140,000 light-years along its longest axis. To determine its distance from us, we can use the angular diameter, which is 3.18°.

We can use the small-angle formula to find the distance. This formula relates the angular diameter (in radians), the actual diameter, and the distance between the observer and the object:

angular diameter (radians) ≈ actual diameter / distance

First, we need to convert the angular diameter from degrees to radians:

3.18° * (π radians / 180°) ≈ 0.0555 radians

Now, plug in the values into the small-angle formula:

0.0555 radians ≈ 140,000 light-years / distance

To solve for the distance, divide both sides of the equation by 0.0555 radians:

distance ≈ 140,000 light-years / 0.0555 radians
distance ≈ 2,522,522 light-years

For more about distance:

https://brainly.com/question/15172156

#SPJ11

The change in velocity of the tip of the second's hand in 15 seconds is: [tex]\pi /(30\sqrt2) cm/s[/tex]. The correct option is B.

To determine the change in velocity of the tip of the second's hand, we need to consider that the hand moves in a circular path with a radius of 1 cm. In 15 seconds, the angle covered is (15/60) × 360 = 90 degrees, or π/2 radians.

The initial velocity can be represented as (v1 = rω1) and the final velocity as (v2 = rω2), where r is the radius (1 cm) and ω is the angular velocity. Since the second's hand moves at a constant speed, the angular velocities are equal, and the change in velocity (∆v) can be calculated using the formula:

∆v = √(v1² + v2² - 2*v1*v2cos(π/2))

Since cos(π/2) = 0, the formula simplifies to:

∆v = √(v1² + v2²)

As v1 = v2 = rω,

∆v = √(2(rω)²) = rω√2 = (1cm)(π/30 rad/s)√2 = π/(30√2) cm/s

So, the change in velocity of the tip of the second's hand in 15 seconds is π/(30√2) cm/s. The correct option is B.

To know more about velocity , refer here:

https://brainly.com/question/1482529#

#SPJ11

Complete question:

The length of speed's hand of watch is 1cm the change in velocity of is tip in 15 sec

A. zero

B. π/(30√2)

C. π/30

D. 2π/(30√2)

Science and technology have had a significant influence on society, with both successes and difficulties.

The achievements can be noted as -

The challenges can be noted as -

Read more about science and technology on:

https://brainly.com/question/28497175

#SPJ1

In a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.
7
Since the half-life is 8 days, we can divide 32 days by the half-life to find the number of half-lives that have occurred: 32 days ÷ 8 days/half-life = 4 half-lives.

Now, for each half-life, the amount of Iodine-131 will decrease by half. After 1 half-life (8 days), 512 mg will become 256 mg. After 2 half-lives (16 days), it will be 128 mg. After 3 half-lives (24 days), it will be 64 mg. Finally, after 4 half-lives (32 days), the amount of Iodine-131 remaining in the sample will be 32 mg.

So, in a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.

To know more about sample, refer here:

https://brainly.com/question/30759604#

#SPJ11

Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to the displacement from the equilibrium point and is directed towards the equilibrium point.

This is known as Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.

Mathematically, this can be expressed as F = -kx, where F is the restoring force, x is the displacement from the equilibrium point, and k is the spring constant, a measure of the stiffness of the spring.

To know more about Hooke's Law refer here

https://brainly.com/question/29126957#

#SPJ11

The magnitude of the Drag force is 0.0117 N

a) To determine the work done by the motor when the wheelchair starts at rest and speeds up to its normal speed, we can use the work-energy theorem:

Work = (1/2) * m * (vf^2 - vi^2)

Where m is the total mass of the wheelchair and person (26 kg + 80 kg = 106 kg), vf is the final speed (24 km/h = 6.67 m/s), and vi is the initial speed (0 m/s).

Work = (1/2) * 106 kg * (6.67 m/s)^2
Work ≈ 1,491.1 J

b) To determine the maximum distance the wheelchair can travel on a horizontal surface at its normal speed, we can use the following formula:

Distance = (Stored energy) / (Power * Time)

First, we need to calculate the time that the wheelchair can run at normal speed:

Time = (Stored energy) / (Power)
Time = 2.4 * 10^6 J / 340 W
Time ≈ 7,058.8 s

Now we can calculate the distance:

Distance = (6.67 m/s) * (7,058.8 s)
Distance ≈ 47,102.4 m

c) To calculate the magnitude of the drag force due to the flexing of the wheelchair's soft rubber tires, we can use the following formula:

Drag force = (Power expended against drag) / (speed)

First, we need to calculate the power expended against drag:

Power expended against drag = 0.00023 * 340 W
Power expended against drag ≈ 0.0782 W

Now we can calculate the drag force:

Drag force = 0.0782 W / 6.67 m/s
Drag force ≈ 0.0117 N

To learn more about magnitude, refer below:

https://brainly.com/question/14452091

#SPJ11

The resistance of the heating element is 9 Ohms

Ohm's law states that the current (I) flowing through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) between them. Mathematically, this can be expressed as:

V = IR

In this scenario, we are given the power (P) and current (I) of a heater, and we are asked to find its resistance (R). Power can be calculated using:

P = IV

where V is the voltage across the heater. Since we are not given the voltage, we can rearrange Ohm's law to solve for the resistance:

R = V/I

Substituting the formula for power into this equation, we get:

R = (V/I) = (P/I²)

Substituting the given values of power and current, we get:

R = (325 W) / (6.0 A)² = 9.0 Ohms

The correct answer is (D).

To know more about Ohm's law, click here

https://brainly.com/question/1247379

#SPJ1

The effective external resistance of the circuit is 3.5 ohms, the current in the circuit is 1.71 A, the lost voltage in the battery is 1.285 V, and the current in one of the 3-ohm resistors is 1.71 A.

To solve this problem, we can use Kirchhoff's circuit laws and Ohm's law.

First, let's calculate the equivalent resistance of the parallel combination of two 3-ohm resistors:

1/Rp = 1/3 + 1/3

Rp = 1.5 ohm

Now, let's calculate the total external resistance of the circuit:

R = 2 + Rp

R = 2 + 1.5

R = 3.5 ohm

Using Ohm's law, we can calculate the current in the circuit:

V = IR

I = V/R

I = 6/3.5

I = 1.71 A

The lost voltage in the battery is given by:

VL = E - Ir

VL = 23 - 1.711.5

VL = 1.285 V

The current in one of the 3-ohm resistors is the same as the current in the circuit:

I = 1.71 A

Learn more about resistors and resistance at: https://brainly.com/question/29635283

#SPJ1

Complete question:

A battery Of 3 cells is arranged in series each of emf 2V and internal resistance of 0.5-ohm and connected to a 2-ohm resistor.

In a series with a parallel combination of two 3-ohm resistors,

The angular momentum of a 265 kg motorcycle traveling at 25 m/s around a circular curve with a radius of 500 m is [tex]3,312,500 \;kg.m^2/s.[/tex]

To calculate the angular momentum of the motorcycle, we need to first find its angular velocity. Since the motorcycle is traveling around a circular curve, we can use the formula:

[tex]v = r\omega[/tex]

where v is the velocity of the motorcycle, r is the radius of the curve, and ω is the angular velocity.

Rearranging this formula to solve for ω, we get:

[tex]\omega = v/r[/tex]

Substituting the values given, we get:

[tex]\omega = 25 \;m/s \;/ \;500 m = 0.05 \;rad/s[/tex]

Next, we can use the formula for angular momentum:

[tex]L = I\omega[/tex]

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

For a point mass moving in a circular path, the moment of inertia is simply mr², where m is the mass of the motorcycle and r is the radius of the curve.

Substituting the values given, we get:

[tex]L = (265 \;kg)(500 \;m)^2(0.05 \;rad/s)[/tex]

[tex]L = 3,312,500 \;kg.m^2/s[/tex]

Therefore, the angular momentum of the motorcycle is [tex]3,312,500 \;kg.m^2/s.[/tex]

In summary, the angular momentum of a 265 kg motorcycle traveling at 25 m/s around a circular curve with a radius of 500 m is [tex]3,312,500 \;kg.m^2/s.[/tex]

To know more about angular momentum refer here:

https://brainly.com/question/29563080#

#SPJ11

Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

In 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.

More on Hubble's relation can be found here: https://brainly.com/question/29752713

#SPJ1

The total internal resistance of the battery is 1.5Ω

Internal resistance is a measure of the resistance to the flow of electric current within a device or system. It is the inherent resistance of the components within the system, including the wires, battery, and any other electrical components.

Since the three cells are connected in series, the total emf of the battery is equal to the sum of the emfs of each cell. Therefore, the total emf of the battery is:

E = 3E0

where E0 is the emf of each cell.

The internal resistance of each cell is given as 0.5Ω. Therefore, the total internal resistance of the battery is:

r = 3 x 0.5Ω = 1.5Ω

Learn more about resistance on

https://brainly.com/question/30398629

#SPJ1

It's not just here in the United States that we're seeing this, London has also added this category to their marathon.

This is an example of how society is constantly evolving and recognizing the need for inclusion and diversity. The social construction of gender and gender identity has traditionally been binary, with individuals being categorized as either male or female. However, as society has become more aware and accepting of non-binary gender identities, we are seeing a shift in the way that institutions and organizations are accommodating these individuals.

By creating a non-binary category in marathons, organizers are acknowledging the importance of inclusivity and providing a space for non-binary individuals to participate in sports without being forced to conform to binary gender categories.

Find out more on social construction here: https://brainly.com/question/28631758

#SPJ1

The statement describes an irregularly shaped object experiencing four forces in the x-y plane, and elaborating on its nature, the magnitude and direction of the forces, and their intended outcome provides more context to the scenario.

The given statement describes a scenario in which an object of irregular shape is subjected to four forces acting in the x-y plane. To rephrase this statement, one could start by stating that there is an object, the shape of which is not uniform or regular, and this object is experiencing the influence of four different forces.

These four forces have been designated as 1, 2, 3, and 4, and all of them are acting within the x-y plane. One way to elaborate on this statement is to provide additional context about the nature of the object, the magnitude and direction of the forces, and the intended outcome of this scenario.

For example, the irregularly shaped object could be a vehicle or a piece of machinery, and the four forces could be the result of external factors such as wind, gravity, or applied forces. The magnitude and direction of each force could be significant in determining the overall motion of the object, and the ultimate outcome could be to cause the object to move in a certain direction or to remain stationary despite the presence of the forces.

To learn more about forces

https://brainly.com/question/13191643

#SPJ4

Complete question:

How would you rephrase the statement "Four forces (1,2,3 and 4) are in the x-y plane and act on an irregularly shaped object"?

If you look at them with a telescope that has an angular resolution of 0. 5 arcsecond, you will see two distinct stars. Therefore, the correct statement is option A.

An angular resolution of 0.5 arcseconds means that the telescope can distinguish between two objects that are at least 0.5 arcseconds apart. This is because angular resolution is the smallest angle between two objects that can be distinguished as separate entities.

In this case, if the two stars are separated by more than 0.5 arcseconds, they will be seen as two distinct stars. However, if they are separated by less than 0.5 arcseconds, they may appear as a single blurred image, which is known as the telescope's point spread function.

This is because the light from each star is diffracted by the telescope's aperture, causing them to overlap and blur together.

If the stars are separated by more than the telescope's angular resolution, they will be seen as separate and distinct points of light. Therefore, option (a) is the correct statement.

In summary, with an angular resolution of 0.5 arcseconds, a telescope can distinguish between two objects that are at least 0.5 arcseconds apart.

If the two stars are separated by more than 0.5 arcseconds, they will appear as two distinct stars, but if they are closer together, they may appear as a single blurred image.

To know more about angular resolution refer here:

https://brainly.com/question/30575514#

#SPJ11

Complete Question:

Choose the correct statement describing, what will you see if you look at them with a telescope that has an angular resolution of 0.5 arcsecond.

a. Two distinct stars.

b. One point of light that is the blurred image of both stars.

c. Nothing at all.

The amount of heat transferred to the wooden beam if it has mass 60kg is 70800 J

Amount is a mathematical concept that refers to the quantity or size of something. It can be used to describe a numerical value, such as a monetary amount, a quantity of units of measurement, or a count of items. Amounts can also be expressed in terms of fractions, decimals, or percentages. In everyday use, it is often used to refer to the total sum of money, goods, or services involved in a transaction. For example, when discussing a purchase, one might say "the amount was $25." Amount is also used in a more general sense, to refer to a large quantity or number of something. For example, one might say "there was a huge amount of people at the event."

Heat transferred (Q) = mass (m) x specific heat capacity (c) x change in temperature (ΔT)
Q = 60 kg x 0.84 J/g°C x (35°C - 15°C)
Q = 70800 J

To learn more about amount
https://brainly.com/question/29217523
#SPJ4

Answer:

M1 V1 + M2 V2 = 0     the center of mass remains at zero since no external forces are present

Ex:     V1 = - M2 / M1 * V2

As fluids are transported over a long distance, the fluid pressure in the pipes tends to decrease. This occurs due to several factors, including friction, elevation changes, and pipe diameter variations.

1. Friction: As the fluid flows through the pipes, it encounters resistance from the pipe walls, which is known as friction. This friction causes the fluid to lose energy, resulting in a drop in pressure. The longer the distance, the more friction the fluid experiences, and the greater the pressure loss.

2. Elevation changes: When a fluid flows through pipes with elevation changes, the pressure can vary due to gravity. Fluids flowing uphill experience a decrease in pressure due to the energy required to move against gravity. Conversely, fluids flowing downhill may experience an increase in pressure as gravity aids in the movement.

3. Pipe diameter variations: If the pipe diameter changes along the path, it can also affect the fluid pressure. As the fluid moves from a larger diameter pipe to a smaller one, the flow velocity increases, resulting in a decrease in pressure according to Bernoulli's principle.

In summary, as fluids are transported over long distances, the fluid pressure in the pipes generally decreases due to factors such as friction, elevation changes, and pipe diameter variations. This happens because the fluid loses energy as it overcomes these obstacles during its flow, leading to a reduction in pressure.

To know more about fluids refer here

https://brainly.com/question/21708739#

#SPJ11

The minimum horizontal force required to cause the lower block to slide out from under the upper block is F = μs(Mg + mg)

Let's consider the forces acting on the lower block. The weight of the block is mg, where g is the acceleration due to gravity. The normal force acting on the block is N = Mg + mg, where M is the mass of the upper block. The maximum static frictional force that can act between the two blocks is μsN.

If the applied force is F, the net force acting on the lower block is F - μsN. If this net force is greater than zero, the block will slide. Therefore, we can write:

F - μsN > 0

Substituting for N, we get:

F - μs(Mg + mg) > 0

Solving for F, we get:

F > μs(Mg + mg)

Therefore, the minimum horizontal force required to cause the lower block to slide out from under the upper block isF = μs(Mg + mg).

Learn more about force on

https://brainly.com/question/12970081

#SPJ1

Answer:

Three states of matter exist—solid, liquid, and gas. Solids have a definite shape and volume. Liquids have a definite volume,

Explanation:

According to the information, the table is completed as follows: Do they have definite shape? no (vapor), no (water), yes (ice); Do they have definite volume? no (vapor), yes (water), yes (ice); Do they compress? yes (vapor), no (water), no (ice).

To fill the table to describe the characteristics of the states of matter we have to look for additional information of each state of matter and then complete the table. According to the information we can infer that the correct way to complete the table is:

Do they have definite shape? no (vapor), no (water), yes (ice); Do they have definite volume? no (vapor), yes (water), yes (ice); Do they compress? yes (vapor), no (water), no (ice).

Vapor | No | No | Yes

Water | No | Yes | No

Ice | Yes | Yes | No

Learn more about states of matter in: https://brainly.com/question/29069107

#SPJ1