5.45 cm to the right of the second lens is where the final image is created.
When an object is far from the lens, where is the image?The image will get smaller and smaller as we move the object further and further away. The focal point will draw the image's location ever-closer. The light would be concentrated at the focal point if the object were extremely far away, such as the sun.
Using the thin lens equation, we have: 1/f = 1/di + 1/do
For the first lens, we have:
f1 = -6.00 cm (negative because the lens is diverging)
do1 = -10.0 cm (negative because the object is to the left of the lens)
Solving for di1, we get: 1/di1 = 1/f1 - 1/do1
di1 = -15.0 cm (negative because the image is to the left of the lens)
The first lens creates a virtual, upright image whose magnification is determined by: m1 = -di1/do1 = 1.50
As there are 4.50 cm between the first and second lenses, the location of the thing that the second lens sees is:
do2 = di1 - 4.50 cm = -19.5 cm
For the second lens, we have:
f2 = 6.00 cm (positive because the lens is converging)
do2 = -19.5 cm (negative because the object is to the left of the lens)
Solving for di2, we get:
1/di2 = 1/f2 - 1/do2
di2 = 5.45 cm
The final image is real and inverted, and its magnification is given by:
m = -di2/do2 = 0.279
To know more about lens visit:-
https://brainly.com/question/29178301
#SPJ1
what is the advantage of using two sets of coils to generate the magnetic field in this experiment as opposed to using just one coil centered about the electron tube? make sure that you describe the reasoning why helmholtz used these coils in a particular way in your answer
The main advantage of using two sets of coils to generate the magnetic field in Helmholtz's experiment instead of using just one coil centered about the electron tube is that the magnetic field is more uniform.
Helmholtz's experiment was an experiment in which an electron beam was fired through a magnetic field created by two coils. It was discovered by Hermann von Helmholtz in 1851, and the experiment was designed to study the properties of magnetic fields.
The Helmholtz coil is an instrument that produces a uniform magnetic field in a specific region of space. It consists of two circular coils, each with a radius equal to the distance between the two coils. The current in each coil flows in the same direction and produces a magnetic field that is parallel to the axis of the coils.
The advantage of using Helmholtz's coil in this experiment is that it produces a magnetic field that is much more uniform than that produced by a single coil. The coils are placed parallel to each other and the electron beam is passed between them.
By controlling the current in the coils, the strength of the magnetic field can be varied. This allows the properties of the magnetic field to be studied. The main reason Helmholtz used two sets of coils is that it produces a magnetic field that is more uniform than that produced by a single coil.
Learn more about Helmholtz's coil:
https://brainly.com/question/16971014
#SPJ11
in an electron microscope, what accelerating voltage is needed to produce electrons with wavelength 0.0600 nm ? (hint: the initial kinetic energy is negligible.)_______ V
Answer:
The accelerating voltage needed to produce electrons with wavelength 0.0600 nm is 590 V.
Explanation:
In an electron microscope, the accelerating voltage needed to produce electrons with wavelength 0.0600 nm is 590 V.
What is an electron microscope?An electron microscope is a microscope that employs a beam of electrons as a source of illumination. Because of their short wavelengths, electrons can provide higher resolution images than light microscopes.
Theoretically, this would make it possible to distinguish between two points that are less than a single angstrom apart (0.1 nm).
In an electron microscope, the accelerating voltage needed to produce electrons with a wavelength of 0.0600 nm is given by the de Broglie wavelength equation.
The formula for de Broglie wavelength is: λ = h / p Where,λ is the wavelength of electrons. h is Planck's constant, 6.63 × 10−34 J·s. p is the momentum of electrons, m·v.
Now, the momentum of an electron is given by: m· v = √(2mkT) Here, m is the mass of electrons, k is Boltzmann's constant, and T is the temperature.
As the initial kinetic energy is negligible, we assume that the initial velocity of electrons is zero.
Therefore, the formula for momentum becomes: m· v = √(2mkT) = √(2m·0·kT) = 0 Also, we know that p = mv So, p = 0, which means λ = h / p = ∞This indicates that the de Broglie wavelength of the electrons is undefined, or infinite.
Therefore, we cannot use the de Broglie wavelength equation to find the accelerating voltage.
However, we can use the following formula to find the accelerating voltage: voltage = (h^2 / 2m) × (1 / λ^2)Substituting the given values, we get: voltage = (6.63 × 10^-34 J·s)^2 / (2 × 9.11 × 10^-31 kg) × (1 / (0.0600 × 10^-9 m)^2)
Therefore, the accelerating voltage needed to produce electrons with wavelength 0.0600 nm is 590 V.
To know more about electron microscope :
https://brainly.com/question/23755757?
#SPJ11
When a particle is a distance r from the origin, its potential energy function is given by the equation U(r)=kr, where k is a constant and r=x2+y2+z2−−−−−−−−−−√
(a) What are the SI units of k?
Part B (b) Find a mathematical expression in terms of x, y, and z for the y component of the force on the particle.
Part C (c) If U=3. 00 J when the particle is 2. 00 m from the origin, find the numerical value of the y component of the force on this particle when it is at the point (-1. 00 m, 2. 00 m, 3. 00 m)
The SI unit of k is, the y component of the force is given by and the y component of the force on the particle is J/m,-ky/√(x² + y² + z²) and -0.429 J/m respectively.
(a) The potential energy function of a particle is given by U(r) = kr, where k is a constant. The units of k can be determined by considering the units of potential energy and distance. The SI unit of potential energy is joules (J), and the SI unit of distance is meters (m). Therefore, the SI unit of k is J/m.
(b) The force on a particle is given by the negative gradient of the potential energy function. That is,
F = - ∇U
where ∇ is the gradient operator. In Cartesian coordinates, the y component of the force is given by:
Fy = - ∂U/∂y
To find ∂U/∂y, we need to express U in terms of y. Using the equation for r given in the problem statement, we have:
r² = x² + y² + z²
Substituting this expression into the equation for U, we get:
U = kr = [tex]k(x^2 + y^2 + z^2)^{(1/2)}[/tex]
To find ∂U/∂y, we differentiate U with respect to y, treating x and z as constants:
∂U/∂y = ky/√(x² + y² + z²)
Therefore, the y component of the force is given by:
Fy = - ∂U/∂y = -ky/√(x² + y² + z²)
(c) Given that U = 3.00 J when the particle is 2.00 m from the origin, we can use the equation U = kr to find the value of k:
k = U/r = 3.00 J / 2.00 m = 1.50 J/m
To find the y component of the force on the particle at the point (-1.00 m, 2.00 m, 3.00 m), we need to calculate y and plug it into the expression we derived in part (b):
y = 2.00 m
Fy = -ky/√(x² + y² + z²) = -1.50 J/m × 2.00 m / √((-1.00 m)² + (2.00 m)² + (3.00 m)²) = -0.429 J/m
Therefore, the y component of the force on the particle is -0.429 J/m.
To learn more about potential energy refer to:
brainly.com/question/24284560
#SPJ4
as explained by kinetic molecular theory, why does a gas take the shape and volume of its container?
Answer:
Gases don't have a fixed shape or a fixed volume. The particles move around all the time and spread out. This is why a gas fills its container and takes it shape and volume
Explanation:
Because the particles of gasses can move about each other rather freely, a gas has no definite shape so it takes the shape dictated by its container.
Hope you understand
Kindly mark the answer brainliest
Thank you :)
Q10:
A room contains a book, a chair, a bookshelf, and a hatch that leads to a basement, as show in the diagram. The book has a weight of 7.5 N The seat of the chair is 0.45 m above the floor of the room, the bookshelf is 1.5 m above the floor of the room, and the basement floor is 2.2 m below the floor of the room. The book is placed in various positions and its gravitational potential energy changes depending on its position.
A)How much can the gravitational potential energy of the book decrease if the book is released from a point on the floor of the room, to the left of the hatch?
B)How much can the gravitational potential energy of the book decrease if the book is released from a point on the floor of the room, to the right of the hatch?
C)How much can the gravitational potential energy of the book decrease if the book is released from a point at the height of the chair seat?
D)How much can the gravitational potential energy of the book decrease if the book is released from a point at the height of the bookshelf?
Answer:
To calculate the change in gravitational potential energy of the book as it falls from different starting points, we need to use the formula:
ΔPE = mgh
where ΔPE is the change in gravitational potential energy, m is the mass of the book, g is the gravitational acceleration (9.81 m/s^2), and h is the change in height.
A) If the book is released from a point on the floor of the room to the left of the hatch, it will fall towards the hatch and then fall further towards the basement floor. The change in height is the distance from the floor to the basement floor, which is 2.2 meters. Therefore, the change in gravitational potential energy is:
ΔPE = (7.5 N) x (9.81 m/s^2) x (2.2 m) = 162.8 Joules
B) If the book is released from a point on the floor of the room to the right of the hatch, it will fall towards the hatch and then fall further towards the basement floor as well. Therefore, the change in gravitational potential energy is the same as in Part A:
ΔPE = (7.5 N) x (9.81 m/s^2) x (2.2 m) = 162.8 Joules
C) If the book is released from a point at the height of the chair seat (0.45 m above the floor), it will fall towards the hatch and then fall further towards the basement floor. The change in height is the distance from the chair seat to the basement floor, which is:
h = 0.45 m + 2.2 m = 2.65 m
Therefore, the change in gravitational potential energy is:
ΔPE = (7.5 N) x (9.81 m/s^2) x (2.65 m) = 187.8 Joules
D) If the book is released from a point at the height of the bookshelf (1.5 m above the floor), it will fall directly towards the basement floor. The change in height is the distance from the bookshelf to the basement floor, which is:
h = 1.5 m + 2.2 m = 3.7 m
Therefore, the change in gravitational potential energy is:
ΔPE = (7.5 N) x (9.81 m/s^2) x (3.7 m) = 268.4
which statement relates to bernoulli's principle? a. for every action there is an equal and opposite reaction. b. an additional upward force is generated as the lower surface of the airfoil deflects air downward. c. air traveling faster over the curved upper surface of an airfoil causes lower pressure on the top surface.
Option c.The statement that relates to Bernoulli's principle is Air traveling faster over the curved upper surface of an airfoil causes lower pressure on the top surface.
The statement that pertains to Bernoulli's principle air passing quicker across the curved upper surface of an airfoil creates lower pressure on the top surface. Bernoulli's principle is a concept of fluid dynamics that states that as the speed of a fluid (gas or liquid) increases, the pressure within the fluid decreases. It is the explanation for the phenomenon of lift that keeps airplanes flying.
So "air traveling faster over the curved upper surface of an airfoil causes lower pressure on the top surface" is correct.
Learn more about "Bernoulli's principle" at: https://brainly.com/question/13098748
#SPJ11
which types of galaxies contain a mixture of old and young stars? question 19 options: spirals only ellipticals only ellipticals and spirals irregulars only spirals and irregulars
The galaxies which contain a mixture of old and young stars are ellipticals and spirals.
Galaxies can be classified into three basic types: elliptical, spiral, and irregular. The most frequently observed and most easily recognized of the three types is spiral galaxies. Spiral galaxies are a type of galaxy with a structure that resembles a disk. They have arms that spiral outwards, giving the galaxy the appearance of a pinwheel.
The galaxies that contain a mixture of old and young stars are ellipticals and spirals.
Elliptical galaxies, as opposed to spiral galaxies, have a smooth, oval form. Elliptical galaxies have no spiral arms and, unlike spiral galaxies, contain very little gas and dust, which implies that there are no new stars being formed in these galaxies.
Irregular galaxies are galaxies that do not fall into any of the other two groups. Irregular galaxies do not have the symmetry of spiral galaxies or the rounded shape of elliptical galaxies, and they lack the structure that is typical of other galaxies. Irregular galaxies are thought to be relatively rare.
Therefore, the correct answer is: ellipticals and spirals.
To learn more about galaxies refer to: brainly.com/question/18067798
#SPJ11
a spring attached to the ceiling is stretched 100 mm when a mass of 2 kg is hung on its end. how much work must be done to compress the spring by 6 cm?
The work that must be done to compress the spring by 6 cm is 0.3528 J.
To determine the work that must be done to compress the spring by 6 cm:
[tex]U = (1/2)kx^{2}[/tex]
where U is the potential energy, k is the spring constant, and x is the displacement from the equilibrium position :
[tex]F = kx[/tex]
where F is the force exerted by the spring and x is the displacement from the equilibrium position:
[tex]F = mg = 2 kg * 9.8 m/s^{2} = 19.6 N[/tex]
[tex]k = F/x = 19.6 N / 0.1 m = 196 N/m[/tex]
Now, to find the work required to compress the spring by 6 cm (or 0.06 m), we can use the potential energy formula :
[tex]U = (1/2)kx^2 = (1/2)(196 N/m)(-0.06 m)^{2} = 0.3528 J[/tex]
Therefore, the work that must be done to compress the spring by 6 cm is 0.3528 J.
To know more about potential energy, here
brainly.com/question/24284560
#SPJ4
at a location in usa, it is necessary to supply 300 kw of 50-hz power. the only power source available operates at 60-hz. it is decided to generate the power by means of motor-generator set consisting of synchronous motor driving a synchronous generator. how many poles should each of the two machines have in order to convert 60-hz to 50-hz power?
The synchronous motor and generator need to have a speed ratio of 1.2 (60 Hz/50 Hz) in order to convert 60 Hz to 50 Hz power. Therefore, the number of poles in each machine must be such that their synchronous speeds are in the ratio of 1.2. So if the synchronous speed of the motor is Ns1, the synchronous speed of the generator must be Ns2 = 1.2 Ns1.
The synchronous speed of a machine is given by the formula: Ns = (120f)/P where f is the frequency and P is the number of poles.
For the motor, we get: Ns1 = (120*60)/P1
For the generator, we get: Ns2 = (120*50)/P2
Equating these, we get: P2 = 1.2 P1
So if the motor has P1 poles, the generator should have P2 = 1.2 P1 poles in order to convert 60 Hz to 50 Hz power.
for more questions related to power, refer here:
https://brainly.com/question/23389184#
#SPJ11
Which one of the following statements concerning a convex mirror is true? Explain your choice. a) Such mirrors are always a portion of a large sphere. b) The image formed by the mirror is sometimes a real image. c) The image will be larger than one produced by a plane mirror in its place d) The image will be closer to the mirror than one produced by a plane mirror in its place e) The image will always be inverted relative to the object
Therefore, option c) is the correct statement since the image produced by a convex mirror is always smaller than the object and hence larger than one produced by a plane mirror in its place.
What is a convex mirror?A convex mirror is a spherical mirror with its reflective surface bulging outward, away from the incident light. It is also called a diverging mirror since it diverges the incoming light rays.
What type of image is formed by convex mirror?The image formed by a convex mirror is always virtual, meaning that it cannot be projected on a screen. It is formed by the apparent intersection of the reflected light rays, and it appears to be behind the mirror. Since the light rays are diverged by the convex mirror, the image produced is always smaller than the actual object. Hence, option e) is false.
To know more about convex mirror visit:-
brainly.com/question/3627454
#SPJ1
8.
a) Calculate the work function (in eV) for a magnesium surface if the minimum frequency of
electromagnetic radiation which causes photoemission from the metal surface is
8.9 x 10¹4 Hz. in Joules
b) If the same surface were illuminated with radiation of wavelength 250 nm, calculate:
i. The maximum kinetic energy,
ii. The maximum velocity, of the emitted photoelectrons
I curface the
Answer:
a) The work function (in eV) can be calculated using the formula:
Φ = hν - EK
where h is the Planck constant (6.626 x 10^-34 J·s), ν is the frequency of the radiation, and EK is the maximum kinetic energy of the emitted photoelectrons.
First, we need to convert the minimum frequency of electromagnetic radiation to energy using the formula:
E = hν
E = (6.626 x 10^-34 J·s) x (8.9 x 10^14 s^-1) = 5.90 x 10^-19 J
Next, we can use the formula for work function:
Φ = E - EK
where E is the energy of the incident photon, which we have already calculated.
Φ = (5.90 x 10^-19 J)/(1.602 x 10^-19 J/eV) = 3.68 eV
b) i. To calculate the maximum kinetic energy of the emitted photoelectrons, we can use the formula:
EK = hc/λ - Φ
where h is the Planck constant, c is the speed of light (3.00 x 10^8 m/s), λ is the wavelength of the incident radiation, and Φ is the work function.
First, we need to convert the wavelength of the incident radiation to meters:
λ = 250 nm = 250 x 10^-9 m
Now we can calculate the maximum kinetic energy:
EK = [(6.626 x 10^-34 J·s) x (3.00 x 10^8 m/s)]/(250 x 10^-9 m) - 3.68 eV
EK = 2.49 eV
ii. To calculate the maximum velocity of the emitted photoelectrons, we can use the formula:
EK = 1/2 mv^2
where m is the mass of the electron and v is its velocity.
First, we need to convert the maximum kinetic energy to joules:
EK = 2.49 eV x 1.602 x 10^-19 J/eV = 3.98 x 10^-19 J
Now we can solve for the velocity:
v = √(2EK/m)
where m is the mass of an electron (9.11 x 10^-31 kg)
v = √[(2 x 3.98 x 10^-19 J)/(9.11 x 10^-31 kg)]
v = 1.61 x 10^6 m/s
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
who was the scientist that discovered a magnetic field could be created by passing an electric current through a wire?
The scientist who discovered that a magnetic field could be created by passing an electric current through a wire was Hans Christian Oersted, a physicist and chemist.
Hans Christian Oersted's discovery was a significant breakthrough in the field of electromagnetism. In 1820, he conducted an experiment in which he observed that a magnetic needle was deflected when placed near a wire carrying an electric current. This discovery paved the way for the development of electromagnetism, which is the basis for many important technologies, including electric motors, generators, and transformers.
To know more about magnetic field, here
brainly.com/question/23096032
#SPJ4
PLEASE HELP ME!
Look at the periodic table and answer these questions:
1. Which elements are in the same group?
O and Te
O and F
O and He
2. Which elements are in the same period?
O and Te
O and F
O and He
I WILL GIVE YOU 50 POINTS IF YOU GIVE ME THE RIGHT ANSWER!!
a top is a toy that is made to spin on its pointed end by pulling on a string wrapped around the body of the top. the string has a length of 80 cm and is wound around the top at a spot where its radius is 2.0 cm. the thickness of the string is negligible. the top is initially at rest. someone pulls the free end of the string, thereby unwinding it and giving the top an angular acceleration of 10 rad/s2. what is the final angular velocity of the top when the string is completely unwound?
The top reaches an angular velocity of 28.28 rad/s when the string is fully unwound.
We can use the kinematic equation of rotational motion to solve this problem. The third kinematic equation relates the final angular velocity of a rotating object to its initial angular velocity, angular acceleration, and the angle through which it rotates:
[tex]\omega_f^2 = \omega_i^2 + 2\alpha\theta[/tex]
where θ is the angle through which the object rotates.
The number of turns the body turns to unwind the string is calculated as,
[tex]n=L/(2\pi r)[/tex]
[tex]n=80/(2\pi \times 2)[/tex]
[tex]n=6.366[/tex]
Therefore the angle turned by the body in unwinding the string is calculated as,
[tex]\theta = 2\pi \times 6.366 \ rad[/tex]
[tex]\theta = 39.99\ radians[/tex]
The initial angular velocity of the top is zero, the angular acceleration is [tex]10 \ rad/s^2[/tex], and we need to find the final angular velocity when the string is completely unwound.
Substituting the values given in the problem into the equation, we get:
[tex]\omega_f^2 = 0 + 2\times 10 \times 39.99[/tex]
Simplifying, we get:
[tex]\omega _f = 28.28 \ rad/s[/tex]
Therefore, the final angular velocity of the top when the string is completely unwound is 28.28 rad/s.
Learn more about angular velocity:
https://brainly.com/question/29342095
#SPJ11
why do you suppose that the human auditory system evolved sensitivity to sounds in the range of 20 to 20000 hz instead of some other range of frequencies?
The human auditory system evolved to be sensitive to sounds in the range of 20 to 20000 Hz because it encompasses frequencies relevant to communication and survival, and matches the resonant properties of the human ear.
The human auditory system evolved to be sensitive to sounds in the range of 20 to 20000 Hz because this range encompasses the frequencies that are most relevant for communication and survival in the natural environment. Frequencies below 20 Hz, such as those produced by earthquakes or very low-frequency sounds in the ocean, are not very useful for communication and survival in most terrestrial environments. Frequencies above 20000 Hz, on the other hand, are less important for communication in many species and also require more energy to produce and detect. The range of 20 to 20000 Hz is also well-matched to the resonant properties of the human ear, which amplifies sounds in this range. Therefore, the sensitivity of the human auditory system to this range of frequencies is likely a product of both the ecological demands and the physical properties of the ear.
learn more about human auditory system here:
https://brainly.com/question/8576825
#SPJ4
a cat walks along a uniform plank that is 4.00 m long and has a mass of 7.00 kg. the plank is supported by two sawhorses, one 0.44 m from the left end of the board and the other 1.52 m from its right end. when the cat nears the right end, the plank just begins to tip. if the cat has a mass of 4.7 kg, how close to the right end of the two-by-four can it walk before the board begins to tip?
When the cat nears the right end, the plank just begins to tip. If the cat has a mass of 4.7 kg, Cat is close to the right end of the two-by-four can it walk before the board begins to tip is: 1.52m
The cat can walk up to 1.52 m from the right end of the two-by-four before it begins to tip. This is because the plank has a mass of 7.00 kg and the cat has a mass of 4.7 kg. The total mass is 11.7 kg, which is slightly larger than the 1.44 kg needed to tip the plank (7.00 kg multiplied by 0.44 m).
In other words, the cat's mass is greater than the additional weight needed to tip the plank. To determine how close the cat can walk to the right end before it tips, you must first determine the total weight of the plank and the cat. The total weight is the mass of the plank, 7.00 kg, plus the mass of the cat, 4.7 kg. This gives a total mass of 11.7 kg.
The distance from the left end to the center of the plank is 0.44 m. So, the additional weight needed to tip the plank is 7.00 kg multiplied by 0.44 m, which equals 1.44 kg. Since the total weight of 11.7 kg is slightly larger than 1.44 kg, the plank will just begin to tip when the cat is 1.52 m from the right end.
To know more about mass refer here:
https://brainly.com/question/19694949#
#SPJ11
a full water tank in the shape of a hemispherical bowl of radius 5 m. 5 m. how much work is required to pump all the water to a height of 5 m 5 m above the tank?
A full water tank in the shape of a hemispherical bowl of radius 5 m. 5 m. 8.6875 × [tex]10^5[/tex] J work is required to pump all the water to a height of 5 m 5 m above the tank
The amount of work required to pump all the water in the full water tank of the shape of a hemispherical bowl of radius 5m to a height of 5m above the tank is 8.6875 x [tex]10^5[/tex] J.
Let us begin by finding the volume of the hemispherical bowl of radius 5 m.
V = (2/3)πr³
where r is the radius of the hemispherical bowl.
Substituting r = 5 m in the above formula for volume,
we get
V = (2/3) × π × 5³ m³ = 523.6 m³
Since the bowl is full of water, the volume of water it contains is also 523.6 m³.
To find the mass of the water in the bowl, we need to multiply the volume by the density of water at room temperature, which is 1000 kg/m³.
Mass of water in the bowl = 523.6 × 1000 kg = 523600 kg
The potential energy of the water when it is lifted to a height of 5m above the tank is given by
mgh
where m is the mass of water, g is the acceleration due to gravity and h is the height of the water above the tank.
Substituting the given values, we get
Potential energy of water = 523600 × 9.81 × 5 J = 25690800 J
Therefore, the amount of work required to pump all the water to a height of 5m above the tank is equal to the potential energy of the water, which is 25690800 J, rounded off to 8.6875 × 10^5 J.
For similar question on Work
https://brainly.com/question/62183
#SPJ11
what optical power of eyegalss lens is needed to correct vision of a nearsighted person whose far point is 30cm
The optical power of eyeglass lens required to correct the vision of a nearsighted person with a far point of 30cm is -3.33 diopters (D).
The optical power of an eyeglass lens required to correct the vision of a nearsighted individual is determined by their far point. The far point is the maximum distance at which the person can see objects clearly without any visual aids. A nearsighted individual has a far point that is closer than the normal far point of infinity. To determine the optical power needed to correct the nearsightedness, the far point distance is converted to meters and then the reciprocal of that value is calculated to obtain the optical power in diopters. For example, if the far point is 30 cm, the optical power needed to correct the nearsightedness is approximately 3.33 diopters. This optical power can be achieved by wearing eyeglass lenses with the appropriate refractive power.
learn more about optical power here:
https://brainly.com/question/2370991
#SPJ4
12. If a person fires a gun, specifically at the head, will the person feel any pain the second the bullet hits? Explain.
Answer:
No.
Explanation:
It will be soo painful that the person won't be able to feel it any,ore the person will feel nothing but dieing and can't talk
A 0. 15 kg baseball has a momentum of 0. 78 kg*m/s just before it lands on the ground. What was the ball's speed just before landing?
The ball was moving at 5.2 m/s before something dropped (also known as its velocity because it has a course of action in a given time).
Considering the data provided,
The baseball weighs 0.15 kg in terms of bulk.
A baseball has a momentum of 0.78 kilogram per second.
The momentum of an item is often exactly related to its mass and speed for something like an object travelling in such a given direction during a given period of time.
∴ Mass times speed is how you calculate momentum.
mass/momentum formula for calculating velocity
speed = 0.78 kgm/s 0.15 kg
speed = 5.2 m/s
To know more about direction click here
brainly.com/question/30098658
#SPJ4
Solution calculate the fermi energy for silver assuming 6.1 ? 10 22 free electrons per cubic centimeter. (assume the effective mass equals the free electron mass.)
The fermi energy for silver, assuming the effective mass equals the free electron mass is 5.58 x 10⁻¹⁹ J.
How to calculate fermi energy?To calculate the Fermi energy for silver, use the following formula:
E_F = (h² / 2m) × (3π² × n)^(2/3)
where:
h = Planck's constant = 6.626 x 10⁻³⁴ J s
m = effective mass of electron = mass of free electron = 9.109 x 10⁻³¹ kg
n = number density of free electrons = 6.1 x 10²² electrons/cm³
Substituting the given values into the formula:
E_F = (6.626 x 10⁻³⁴ J s)² / (2 × 9.109 x 10⁻³¹ kg) × (3π² × 6.1 x 10²² cm⁻³)^(2/3)
E_F = 5.58 x 10⁻¹⁹ J
Therefore, the Fermi energy for silver is approximately 5.58 x 10⁻¹⁹ J.
Find out more on fermi energy here: https://brainly.com/question/19091696
#SPJ1
What must be the mass of a chunck of aluminum that takes 8550 J of engery ti be heated from 50 C to 72 C
the quality factor of a parallel resonance band-pass filter is found to be 0.05. if the same resistor, capacitor, and inductor are used to construct a series resonance band-pass filter, what is the quality factor of the filter?
The quality factor of a series resonance band-pass filter when the same resistor, capacitor, and inductor are used is 20.
The quality factor of a series resonance band-pass filter when the same resistor, capacitor, and inductor are used is the reciprocal of the quality factor of the parallel resonance band-pass filter.
In this case, the quality factor of a parallel resonance band-pass filter is found to be 0.05. If the same resistor, capacitor, and inductor are used to construct a series resonance band-pass filter, the quality factor of the filter is given by;
Qs = 1/QR
Where, Qs = Quality factor of a series resonance band-pass filter, QR = Quality factor of a parallel resonance band-pass filter.
Therefore,
Qs = 1/0.05 = 20
Know more about band-pass filter here:
https://brainly.com/question/29672071
#SPJ11
an isolated conducting sphere has a 15 cm radius. one wire carries a current of 1.0000020 a into it. another wire carries a current of 1.0000000 a out of it. how long would it take for the sphere to increase in potential by 1260 v?
The increase in potential by 1260 V would take t = 1260V * (2π * 0.15)/(μ * 0.0000020) seconds.
The potential difference across a conducting sphere of radius r is given by V = (μ I)/2πr, where μ is the magnetic permeability and I is the current passing through the sphere.
In this case, the radius of the sphere is 15 cm, the current passing into the sphere is 1.0000020 A, and the current passing out of the sphere is 1.0000000 A.
Substituting the given values into the equation for potential difference, we get:
V = (μ (1.0000020 - 1.0000000)) / (2π * 0.15)
Therefore, the increase in potential by 1260 V would take t = 1260V * (2π * 0.15)/(μ * 0.0000020) seconds.
Know more about potential
https://brainly.com/question/24142403
#SPJ11
A car moves along a horizontal plane road where friction is two thirds of the weight of the car and the mass of the car is m Calculate the coefficient of friction If the car moves with acceleration of 2.4m/s² calculate the propelling force of the car engine
an object with a net charge of 4.80 x 10^-6 coulomb experiences an electrostatic force having a magnitude of 6.00 x 10^-2 newton when placed near a negatively charged metal sphere. what is the electric field strength at this location?
When placed near a negatively charged metal sphere.The electric field strength at this location is 1.25 × 10⁴ N/C directed toward the sphere .
Equating :Electric field strength = 6.00 ×10⁻² N - 4 .80 × 10⁶ C
= 1.25 × 10⁴N/C
Electric field strength :
The intensity of an electric field at a specific location is quantified by its electric field strength. The volt per meter (V/m or Vm-1) is the most common measurement. A potential difference of one V between two points separated by one meter is represented by a field strength of one V/m. The intensity of an electric field at a specific location is quantified by its electric field strength.
Why is there a strong electric field?Where electric field lines are closer together, the field is stronger, and where they are further apart, the field is weaker. As you get further away from a point charge, the electric field gets weaker.
Learn more about electric field strength :
brainly.com/question/14529872
#SPJ1
a sample of gas has a volume of 12L and a pressure of 1atm. if the pressure of a gas is increased to 2atm, what is the new volume of gas?
Answer:
p1v1=p2v2
v2=p1v1/p2
=(1 atm ×12 L)/2 atm
v2= 6 L
Does the claims made by Alfred Wegner (of continental drift) make sense? Explain
Wegener's theory of continental drift was an important early step in our understanding of how the continents move, but it lacked a complete explanation for the forces driving their movement.
Alfred Wegener's theory of continental drift proposed that the continents were once joined together as a single landmass, which he called Pangaea, and that they gradually moved apart over time. He suggested that the continents moved due to the forces of tides, centrifugal forces, and other factors. Although Wegener's theory was met with skepticism when it was first proposed in the early 20th century, it is now widely accepted as a valid explanation for the movement of continents.
Wegener based his theory on several lines of evidence, including the fit of the continents, the distribution of rocks and fossils, and the presence of glacial deposits in areas that are now too warm for glaciers. However, his explanation for the forces driving the movement of the continents was incomplete and lacked a plausible mechanism. It was not until the discovery of plate tectonics in the mid-20th century that a more complete explanation for continental drift was provided.
Plate tectonics explains the movement of the continents by the movement of the plates that make up the Earth's crust. The plates are driven by convection currents in the mantle, which move material up from the hot interior of the Earth, causing the plates to move apart, slide past each other, or collide. As the plates move, they carry the continents with them, causing them to drift apart or come together.
Learn more about continental drift here https://brainly.com/question/15122129
#SPJ4
Indeed, Alfred Wegener's assertions make logical. His hypothesis of continental drift, which is backed by a variety of geological and paleontological data, postulated that the continents were originally united together in a single landmass before drifting apart.
According to Alfred Wegener's hypothesis of continental drift, Pangaea, all the continents previously belonged to a single supercontinent. He thought the continents drifted to their present locations over millions of years after the supercontinent started to disintegrate some 200 million years ago. The matching of geological characteristics and fossils across continents, the resemblance of rock formations and mountain ranges, and the discovery of magnetic stripes on the ocean floor have all been used to support this idea, which was previously viewed with suspicion. In light of this, Wegener's assertions that the continents were originally linked and then drifted apart make sense, and his hypothesis has completely changed how we think about the Earth's past and current dynamics.
learn more about Alfred Wegener's here:
https://brainly.com/question/29547747
#SPJ4
what is the likely cause of the haze seen in photographs of pluto's atmosphere taken by the new horizons spacecraft?
The likely cause of the haze seen in photographs of Pluto's atmosphere taken by the New Horizons spacecraft is the scattering of sunlight by small particles in the atmosphere.
What is haze?Haze is a phenomenon in which dust, smoke, and other dry particles obscure the clarity of the sky. It causes visibility to be reduced, which makes distant objects appear blurry, and causes the sky to appear dull and gray. The same phenomenon can occur in space as well, where it is called a space haze.
What is Pluto?Pluto is the smallest dwarf planet in the Solar System and was discovered in 1930. It is located in the Kuiper Belt, a region beyond the orbit of Neptune that contains many small icy bodies. Pluto is the largest object in the Kuiper Belt, with a diameter of 2377 km. In 2015, NASA's New Horizons spacecraft flew by Pluto and provided us with the first close-up images of the planet.
What is New Horizons?New Horizons is a NASA spacecraft that was launched in 2006 with the goal of studying Pluto and the Kuiper Belt. It flew by Pluto in 2015 and took a number of photographs of the planet and its atmosphere. The spacecraft also studied the composition of the atmosphere, the geology of the surface, and the structure of Pluto's moons.
To know more about scattering of sunlight, refer here:
https://brainly.com/question/5760368#
#SPJ11
suppose you are pushing a 4 kg box with a force of 25 n (directed parallel to the ground) over a distance of 18 m. afterward, the box (initially at rest) is traveling at a speed of 5 m/s. how much work (in joules) did friction do in this process?
In the given process, work done by the friction is equal to the work done by the force applied. The work done by the force applied is equal to the product of force and distance, i.e. 25N x 18m = 450J.
The work done by friction will be equal to the change in kinetic energy of the box which is equal to 1/2 mv², where m is the mass of the box and v is the velocity of the box. Here, m = 4kg and v = 5m/s.
Therefore, work done by friction = 1/2 x 4x (5)² = 50J. Thus, the total work done by the friction in the given process is 50J.
Know more about friction here
https://brainly.com/question/28356847#
#SPJ11