use a sheet of paper to answer the following question. take a picture of your answers and attach to this assignment. treatment of pentanedioic (glutaric) anhydride with ammonia at elevated temperature leads to a compound of molecular formula c5h7no2. what is the structure of this product? [hint: you need to think about the reactivity not only of acid anhydrides but also of amides and carboxylic acids]

Answer:

Sedimentation equilibrium in a suspension of different particles, such as molecules, exists when the rate of transport of each material in any one direction due to sedimentation equals the rate of transport in the opposite direction due to diffusion.

The amount heat needed to evaporate 500 g of ice that starts at 0 °C is 1504800 J

First, we shall determine the heat needed to melt the ice. Details below:

H₁ = m × ΔHf

H₁ = 500 × 334

H₁ = 167000 J

Next, we shall determine the heat required to change the water from 0 °C to 100°C. Details below:

H₂ = MCΔT

H₂ = 500 × 4.186 × 100

H₂ = 209300 J

Next, we shall determine the heat required to vaporize the water. Details below:

H₃ = m × ΔHv

H₃ = 500 × 2257

H₃ = 1128500 J

Finally, we shall determine the heat required to evaporate the ice. Details below:

Q = H₁ + H₂ + H₃

Q = 167000 + 209300 + 1128500

Total heat required = 1504800 J

Learn more about heat transfer:

https://brainly.com/question/25878495

#SPJ1

(a). [tex]C_2H_5OH + 3O_2[/tex] → [tex]2CO_2 + 3H_2O[/tex]

(b). The volume of air required to burn 250 grams of ethanol at 35°C and 790 mmHg is approximately 6.63 liters.

a. The balanced equation for the combustion of ethanol ([tex]C_2H_5OH[/tex]) in air to generate carbon dioxide ([tex]CO_2[/tex]) and water ([tex]H_2O[/tex]) is:

[tex]C_2H_5OH + 3O_2[/tex] → [tex]2CO_2 + 3H_2O[/tex]

b. We first need to calculate the number of moles of ethanol used in the reaction. The molar mass of ethanol is:

46.07 g/mol

Therefore, the number of moles of ethanol used is:

[tex]n = m/M = 250 g / 46.07 g/mol = 5.42 mol[/tex]

Therefore, the number of moles of oxygen required to burn 5.42 moles of ethanol is:

[tex]3n = 3 * 5.42 mol = 16.26 mol[/tex]

The ideal gas law is:

PV = nRT

V = nRT/P

Substituting the values, we get:

[tex]V = (16.26 mol)(0.08206 L.atm/(mol.K))(308.15 K) / 790 mmHg[/tex]

Simplifying, we get:

V = 6.63 L

To know more about ethanol, here

brainly.com/question/25002448

#SPJ1

O D. (6 + 4)÷2-1×3

the cacuclator gives u the answer to this

1.  Balanced equation for the combustion of propane: [tex]C_3H_8 + 5O_2\ - > 3CO_2 + 4H_2O.[/tex]

2. Balanced equation for the reaction between hydrochloric acid and sodium hydroxide:[tex]HCl + NaOH\ - > NaCl + H_2O.[/tex]

3. 3. Balanced equation for the decomposition of calcium carbonate upon heating: [tex]CaCO_3\ - > CaO + CO_2.[/tex]

1. [tex]C_3H_8 + 5O_2\ - > 3CO_2 + 4H_2O.[/tex]

This reaction shows that propane[tex](C_3H_8)[/tex] reacts with oxygen[tex](O_2)[/tex] from the air to produce carbon dioxide[tex](CO_2)[/tex] and water[tex](H_2O)[/tex] in a balanced chemical equation.

2. [tex]HCl + NaOH\ - > NaCl + H_2O.[/tex]

This reaction demonstrates that hydrochloric acid (HCl) reacts with sodium hydroxide (NaOH) to produce sodium chloride (NaCl) and water [tex](H_2O)[/tex] in a balanced chemical equation.

3. [tex]CaCO_3\ - > CaO + CO_2[/tex].

This reaction illustrates that when calcium carbonate[tex](CaCO_3)[/tex] is heated, it decomposes to produce calcium oxide (CaO) and carbon dioxide [tex](CO_2)[/tex] in a balanced chemical equation.

To know more about calcium carbonate, here

brainly.com/question/13565765

#SPJ4

--The complete Question is, Write balanced equations for each of the processes described below:

1. Combustion of propane (C3H8) in air to produce carbon dioxide and water.

2. Reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) to produce sodium chloride (NaCl) and water (H2O).

3. Decomposition of calcium carbonate (CaCO3) upon heating to produce calcium oxide (CaO) and carbon dioxide (CO2). --

When a 3.00 g mass of compound X is added to 50.0 g of water, a new mixture is formed. This mixture is a combination of two substances, the compound X and water. A compound is a substance formed when two or more different elements combine chemically in a fixed ratio. In this case, compound X is the result of the combination of two or more elements.

The addition of compound X to water results in the formation of a solution. A solution is a homogeneous mixture of two or more substances, in which the components are uniformly distributed. The compound X dissolves in the water to form a homogeneous mixture.

The mass of the resulting mixture is the sum of the mass of compound X and the mass of water. Therefore, the mass of the resulting mixture is 53.00 g (3.00 g + 50.00 g).

Water is a common solvent for many compounds, including compound X. Water molecules have a polar nature, which enables them to dissolve polar and ionic compounds, such as salts and acids. The dissolution of compound X in water is a result of the polar nature of water molecules.

In summary, the addition of a 3.00 g mass of compound X to 50.00 g of water results in the formation of a homogeneous mixture. The resulting mixture has a mass of 53.00 g, which is the sum of the mass of compound X and the mass of water. Water is a common solvent for many compounds, including compound X, and its polar nature enables it to dissolve many polar and ionic compounds.

To know more about  compound refer here

https://brainly.com/question/13516179#

#SPJ11

If the decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction, we would expect the final temperature to be lower than the initial temperature of 28˚C.

This is because during an exothermic reaction, energy is released from the system into the surroundings in the form of heat. In other words, the energy of the products (water and oxygen) is lower than the energy of the reactants (hydrogen peroxide), and the excess energy is released into the surroundings.

As a result, the temperature of the surroundings (in this case, the container holding the reaction) will increase, while the temperature of the system (the reactants and products) will decrease. This means that the final temperature of the reaction will be lower than the initial temperature of 28˚C.

Overall, we would expect the reaction to release heat into the surroundings, causing the temperature of the surroundings to increase while the temperature of the system decreases.

Biodiversity contributes to the sustainability of an ecosystem because it enhances the resilience, stability, and overall productivity of an ecosystem.

Biodiversity refers to the variety of life forms, including the genetic diversity within species, the variety of species, and the range of ecosystems in a given area. High levels of biodiversity result in numerous benefits for ecosystems and the organisms living within them.

Firstly, biodiversity fosters ecosystem resilience, allowing it to recover from disturbances more effectively. A diverse ecosystem is less vulnerable to natural disasters, disease outbreaks, and climate change impacts. When there is a greater variety of species, the ecosystem can better withstand external pressures, and it is more likely to maintain its structure and function.

Secondly, biodiversity supports ecosystem stability. A diverse ecosystem is less susceptible to drastic fluctuations in population sizes or the collapse of specific species. The presence of multiple species can compensate for the loss of a few, ensuring the maintenance of essential ecosystem functions, such as nutrient cycling and energy flow.

Furthermore, biodiversity enhances ecosystem productivity. When multiple species coexist, they can occupy different niches, utilize resources more efficiently, and avoid direct competition.

This promotes higher overall productivity, as each species can contribute to ecosystem processes in unique ways. Increased biodiversity also supports a greater variety of food web interactions, providing a more stable food supply for different species and promoting balanced predator-prey relationships.

In conclusion, biodiversity is crucial for the sustainability of ecosystems because it fosters resilience, stability, and productivity. A diverse ecosystem can better withstand external pressures, maintain essential functions, and support a balanced food web, ultimately benefiting both the environment and human societies that depend on it.

To know more about Biodiversity, visit:

https://brainly.com/question/13073382#

#SPJ11

The equation Q = mcΔT, where Q is the amount of heat absorbed, m is the mass of the object, c is the specific heat capacity of the object, and ΔT is the change in temperature.

In this case, we are given the mass of the wood (1500.0 grams) and its specific heat capacity (1.8 g/JxC), as well as the amount of heat absorbed (67,500 Joules) and the final temperature (57C). We want to find the initial temperature.

First, we can rearrange the equation to solve for ΔT: ΔT = Q/mc. Plugging in the values we know, we get:
ΔT = 67,500 J / (1500.0 g x 1.8 g/JxC) = 25C

This tells us that the temperature of the wood increased by 25C due to the heat absorbed. To find the initial temperature, we can subtract ΔT from the final temperature:

Initial temperature = final temperature - ΔT = 57C - 25C = 32C
Therefore, the initial temperature of the wood was 32C.

In summary, we used the equation Q = mcΔT and rearranged it to solve for ΔT. We then subtracted ΔT from the final temperature to find the initial temperature of the wood. The specific heat capacity tells us how much heat energy is needed to raise the temperature of a given mass of a substance by a certain amount.

In this case, the specific heat capacity of the wood (1.8 g/JxC) was used to calculate how much heat energy was absorbed by the wood. The mass of the wood was also important, as it determines how much heat energy is needed to raise its temperature. The final temperature of the wood and the amount of heat absorbed were given in the problem, and we used this information to solve for the initial temperature.

To know more about specific heat capacity refer here

https://brainly.com/question/29766819#

#SPJ11

1.  The mass of the water sample is approximately 8.77 grams.

2. Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.


We're given the values:
Q = -870 J (lost heat, so negative value)
ΔT = -24.8°C (temperature dropped)
c = 4.18 J/(g°C) (specific heat capacity of water)

Rearrange the formula to solve for mass:
m = Q / (cΔT)

Plug in the values:
m = -870 / (4.18 × -24.8)
m ≈ 8.77 g

The mass of the water sample is 8.77 grams.

We're given the values:
m = 135 g
ΔT = 35°C - 15°C = 20°C
c = 4.18 J/(g°C) (specific heat capacity of water)

Now, use the formula Q = mcΔT to find the heat required:
Q = 135 × 4.18 × 20
Q ≈ 11322 J

Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.

To know more about specific heat capacity click on below link:

https://brainly.com/question/29766819#

#SPJ11

The traits in lobsters are determined by their genetic makeup and environmental factors.

Natural selection can play a role in changing traits over time.

Genetic factors include inherited traits from their parents such as color, size, and shell density. Environmental factors such as water temperature, salinity, and availability of food can also impact these traits.

For example, lobsters in warmer water tend to grow faster and larger than those in cooler water. Changes in habitat or pollution can also impact the availability of food and water quality, leading to changes in growth rates and physical traits.

Lobsters with advantageous traits, such as stronger shells or better camouflage, are more likely to survive and pass on their genes to the next generation. Over time, these beneficial traits may become more common in the population.

Find out more on lobsters here: https://brainly.com/question/31023189

#SPJ1

Ca +Br2 ---> CaBr2

2HNO3 + BaCl2 --->Ba(NO3)2 +2HCl

C7H16 + 11O2 → 7CO2 + 8H2O

Cl2 + 2KI --->2KCl + I2

No reaction

2Na3PO4 + 3Mg(NO3)2 → Mg3(PO4)2 + 6NaNO3

2Al + 3ZnCl2 → 3Zn + 2AlCl3

Li(OH) (ag) + HCI (aq) —>LiCl + H2O

2Na + 2H2O → 2NaOH + H2

The burning splint would make a "pop" sound.

A balanced equation is a chemical equation that has an equal number of atoms of each element on both the reactant and product sides.

In other words, a balanced equation follows the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products in a chemical reaction.

Learn more about balanced equation:https://brainly.com/question/7181548

#SPJ1

The dissociation reaction for the salt AB3 is:

AB3(s) ↔ A3+(aq) + 3B-(aq)

Let's assume the solubility of AB3 in water at 25 °C is x mol/L. Then, the equilibrium concentrations of A3+ and B- can be expressed as x and 3x, respectively.

The Ksp expression for AB3 is:

Ksp = [A3+][B-]^3 = x(3x)^3 = 27x^4

The molar mass of AB3 is 305 g/mol, so the number of moles in 4.30 g (the solubility) is:

n = 4.30 g / 305 g/mol = 0.0141 mol/L

Therefore, the solubility of AB3 at 25 °C is:

x = 0.0141 mol/L

Substituting this into the Ksp expression:

Ksp = 27x^4 = 27(0.0141)^4 = 5.6 x 10^-9

Therefore, the Ksp of AB3 at 25 °C is 5.6 x 10^-9.

Visit here to learn more about molar mass brainly.com/question/22997914

#SPJ11

The percent by mass of hydrogen in CH3COOH is 6.7%. (C)

To calculate the percent by mass of hydrogen in a compound, you need to determine the mass of hydrogen present in relation to the total mass of the compound.

The molecular formula of acetic acid (CH3COOH) indicates that it contains two hydrogen atoms. To calculate the percent by mass of hydrogen, we need to consider the molar mass of hydrogen and the molar mass of acetic acid.

The molar mass of hydrogen (H) is approximately 1.00784 grams per mole, and the molar mass of acetic acid (CH3COOH) can be calculated as follows:

Molar mass of CH3COOH = (molar mass of carbon × 2) + (molar mass of hydrogen × 4) + molar mass of oxygen

= (12.01 g/mol × 2) + (1.00784 g/mol × 4) + 16.00 g/mol

= 24.02 g/mol + 4.03136 g/mol + 16.00 g/mol

= 44.05 g/mol

Now, to calculate the percent by mass of hydrogen, we can use the following formula:

Percent by mass of hydrogen = (mass of hydrogen / total mass of acetic acid) × 100

Since there are two hydrogen atoms in one molecule of acetic acid, the mass of hydrogen is (2 × 1.00784 g/mol) = 2.01568 g/mol.

Plugging the values into the formula, we get:

Percent by mass of hydrogen = (2.01568 g/mol / 44.05 g/mol) × 100= 6.7%

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

(a) The degree of polymerization (DP) for butadiene can be calculated as follows:

DP(butadiene) = (mass of copolymer) x (fraction of butadiene repeat units) / (molar mass of butadiene)

Similarly, the DP for styrene can be calculated as:

DP(styrene) = (mass of copolymer) x (fraction of styrene repeat units) / (molar mass of styrene)

Since the molecular weight of the copolymer and the DPs of both butadiene and styrene are known, we can set up two equations:

350,000 g/mol = (DP(butadiene) x molar mass of butadiene) + (DP(styrene) x molar mass of styrene)

4425 = DP(butadiene) + DP(styrene)

We can solve these equations simultaneously to find the fraction of butadiene repeat units:

DP(butadiene) = (350,000 g/mol - DP(styrene) x molar mass of styrene) / molar mass of butadiene

4425 = DP(butadiene) + DP(styrene)

Substituting the first equation into the second equation and solving for DP(butadiene), we get:

DP(butadiene) = 4425 - DP(styrene)

(350,000 g/mol - DP(styrene) x molar mass of styrene) / molar mass of butadiene = DP(butadiene)

Simplifying and solving for DP(styrene), we get:

DP(styrene) = (350,000 g/mol x molar mass of butadiene) / (molar mass of styrene x molar mass of butadiene + 350,000 g/mol)

DP(styrene) = 1910

Therefore, the DP for butadiene is:

DP(butadiene) = 4425 - 1910 = 2515

The ratio of butadiene to styrene repeat units is:

(fraction of butadiene repeat units) / (fraction of styrene repeat units) = (DP(butadiene) x molar mass of butadiene) / (DP(styrene) x molar mass of styrene)

(fraction of butadiene repeat units) / (fraction of styrene repeat units) = (2515 x 54.09 g/mol) / (1910 x 104.15 g/mol)

(fraction of butadiene repeat units) / (fraction of styrene repeat units) = 0.821

Therefore, the ratio of butadiene to styrene repeat units is approximately 4:1.

(b) Based on the ratio of butadiene to styrene repeat units, this copolymer is likely to be a random copolymer. In a random copolymer, the monomers are added in a statistical manner, resulting in a random distribution of repeat units along the polymer chain. This is consistent with the experimental evidence that the ratio of butadiene to styrene repeat units is not exactly 1:1, indicating that the monomers are not arranged in a specific alternating or block sequence.

Visit here to learn more about polymerization brainly.com/question/27354910

#SPJ11

Bond energy refers to the amount of energy required to break a bond between two atoms. This energy is required because bonds are formed when electrons are shared between atoms, and breaking a bond requires energy to be put into the system to overcome the electrostatic forces holding the atoms together.

In the case of the reaction given, h-h + i-i ---> 2h-i, we are asked to determine the energy change associated with breaking the H-H and I-I bonds and forming two new H-I bonds. To do this, we can use the bond energies of the individual bonds involved.

According to a standard table of bond energies, the H-H bond has a bond energy of 432 kJ/mol, while the I-I bond has a bond energy of 149 kJ/mol. The H-I bond has a bond energy of 436 kJ/mol. Using these values, we can calculate the energy change for the reaction as follows:

(2 x H-I bond energy) - (H-H bond energy + I-I bond energy)
= (2 x 436 kJ/mol) - (432 kJ/mol + 149 kJ/mol)
= 293 kJ/mol

So the energy change for the reaction is 293 kJ/mol. This means that the reaction is exothermic, as energy is released when the bonds are formed. This energy can be used to do work or heat up the surroundings.

Finally, you mentioned the term "marking brainliest". I assume you are referring to the "Brainliest Answer" feature on certain online platforms, where the person who asks a question can choose which answer they found most helpful or accurate. If this is the case, I hope my answer has been helpful and informative!

To know more about "bond energies" refer here

https://brainly.com/question/26141360#

#SPJ11

The answer is (d) cannot solve using 5% approximation rule.

The balanced equation for the reaction is:

C(g) + e(g) ⇌ 2W(g)

The equilibrium constant expression is given by:

Kc = [W]^2 / [C][e]

At equilibrium, let's assume that x moles of C react with x moles of e to produce 2x moles of W. Therefore, the equilibrium concentrations are:

[C] = (3.5 - x) mol/L

[e] = (x) mol/L

[W] = (2x) mol/L

Substituting these values :

Kc = [(2x)^2] / [(3.5 - x)(x)]

Simplifying this expression:

4x^2 + 2.34x - 8.19 = 0

Solving this quadratic equation :

x = (-2.34 ± sqrt(2.34^2 - 4(4)(-8.19))) / (2(4))

x = (-2.34 ± 3.64) / 8

We can ignore the negative root as it does not make physical sense. Therefore:

x = 0.4575 mol/L

Thus, the concentration of e at equilibrium is:

[e] = 0.4575 mol/L

Therefore, the answer is (d) cannot solve using 5% approximation rule.

To know more about equilibrium concentrations refer here:

https://brainly.com/question/13043707

#SPJ11

Gas in a balloon occupies 2. 5 L at 300 K. The temperature will the balloon expand to 7. 5 L is 900 K.

The Charles law states that the volume of the ideal gas is directly proportional to absolute temperature at the constant pressure.

V ∝ T

The Charles’ Law is expressed as :

V₁ / T₁ = V₂ / T₂

Where,

The volume , V₁ = 2.5 L

The temperature,  T₁  = 300 K

The volume, V₂ = 7.5 L

The temperature, T₂ = ?

T₂ =  V₂ T₁ / V₁

T₂  = ( 7.5 × 300 ) / 2.5

T₂  = 900 K

The temperature that will the balloon expand to the 7. 5 L is 900 K.

To learn more about temperature here

https://brainly.com/question/15294958

#SPJ4

Ammonium nitrates can be recovered by evaporating the water added explains that ammonium nitrates dissolved in water and process is endothermic. Thus, option A is correct.

When ammonium is added to water, the temperature of the water decreases. This is because the dissolution of ammonium in water is an endothermic process, meaning it requires energy in the form of heat to take place. When ammonium dissolves in water, it absorbs heat from the surroundings, which causes the temperature of the water to decrease.

Furthermore, ammonium nitrates can be recovered by evaporating the water that was added. This indicates that the ammonium nitrates dissolved in water and the process is endothermic. If the ammonium nitrate had reacted with the water, it would not be possible to recover it by evaporation.

Therefore, option A, "the ammonium nitrates dissolved in water and process is endothermic," is the correct explanation for the observations that when ammonium is added to water, the temperature decreases, and ammonium nitrates can be recovered by evaporating the water added.

To know more about Ammonium nitrates, visit:

https://brainly.com/question/5148461#

#SPJ11

The solvation of borax in water is an exothermic process. This means that energy is released when borax dissolves in water.

This can be seen in the fact that the temperature of the solution increases as borax dissolves in water, indicating that energy is being released into the surroundings.

The reason for this exothermic behavior is that the solvation process involves the breaking of the ionic bonds between borax molecules and the formation of new bonds between the borax ions and water molecules.

The energy released in the formation of these new bonds is greater than the energy required to break the existing bonds, resulting in a net release of energy.

To know more about borax refer to-

https://brainly.com/question/14724418

#SPJ11

The partial pressure of gas X if 0. 500 moles of each is used is 1 atm.

In a gas mixture, the pressure exerted by individual gases on the walls of the container is known as partial pressure of the gas. The sum of the partial pressures of all the gas molecules fives the total pressure of the gas.

Partial pressure = number of moles/ total moles × total pressure

since, 0.5 moles of each gas is used,

partial pressure of X is

= moles of X /total moles of X,E,Z  × total pressure

= 0.5 moles  × 3 atm/ 1.5 moles

= 1 atm

To know more about partial pressure here

https://brainly.com/question/31214700

#SPJ4

The percent of water in Plaster of Paris is 6.2% (approx.) rounded to the nearest tenth.

It can be easily calculated using the formula:

% of water = (mass of water / total mass of compound) x 100

In this case, the molar mass of CaSO₄ · 1/2H₂O is:

1 mol Ca = 40.08 g

1 mol S = 32.06 g

4 mol O = 4 x 16.00 g = 64.00 g

1/2 mol H₂O = 1/2 x 18.02 g = 9.01 g

Therefore, the total molar mass of CaSO₄ · 1/2H₂O is:

40.08 + 32.06 + 64.00 + 9.01 = 145.15 g/mol

The mass of water in one mole of CaSO₄ · 1/2H₂O is 9.01 g, so the percent of water in plaster of Paris is:

% of water = (9.01 g / 145.15 g) x 100 = 6.21%

Rounding this to the nearest tenth gives:

% of water ≈ 6.2%

Therefore, the percent of water in plaster of Paris is approximately 6.2%.

To know more about the plaster of Paris refer here :

https://brainly.com/question/30452789#

#SPJ11

Unknown + Potassium Carbonate → Potassium Nitrate + Unknown Carbonate

[tex]Sr(NO_3)_2[/tex] + [tex]K_2CO_3[/tex] → [tex]2KNO_3[/tex] + [tex]SrCO_3[/tex] (if the unknown is strontium nitrate)

[tex]Mg(NO_3)_2[/tex]+ [tex]K_2CO_3[/tex] → [tex]2KNO_3[/tex] + [tex]MgCO_3[/tex] (if the unknown is magnesium nitrate)

Here are the balanced molecular equations for the reactions that could have occurred between the unknown solution (either strontium nitrate or magnesium nitrate) and potassium carbonate and potassium sulfate: Unknown + potassium carbonate → potassium nitrate + magnesium or strontium carbonate (depending on the unknown)

Unknown + potassium sulfate → potassium nitrate + magnesium or strontium sulfate (depending on the unknown)

Unknown + Potassium Sulfate → Potassium Nitrate + Unknown Sulfate

[tex]Sr(NO_3)_2[/tex] + [tex]K_2SO_4[/tex] → [tex]2KNO_3[/tex] + [tex]SrSO_4[/tex] (if the unknown is strontium nitrate)

[tex]Mg(NO_3)_2[/tex] + [tex]K_2SO_4[/tex] → [tex]2KNO_3[/tex] + [tex]MgSO_4[/tex] (if the unknown is magnesium nitrate)

To determine which reaction occurred, you would need to observe which products were formed. If [tex]SrCO_3[/tex] or [tex]SrSO_4[/tex] were formed, then the unknown was strontium nitrate.

If [tex]MgCO_3[/tex] or [tex]MgSO_4[/tex] were formed, then the unknown was magnesium nitrate.

For more such questions on magnesium, click on:

https://brainly.com/question/30333465

#SPJ11

Answer:

in chemical reactions moles correspond to the number of molecules or atoms that go into reaction. It means that number that is in front of molecule or atom for example in this reaction you have one oxygen it means one mole of oxygen. 4 molecules of acid correspond to 4 moles of HCl. So the final answer would be:

4 moles of HCl

2 moles of H2O

2 moles of Cl2

The number of moles of krypton in a cylinder containing 17 L of krypton at 22.8 atm and 112 degrees Celsius is 6.47 moles.

There seems to be a typo in the question as it states that the cylinder contains Argon (Ar) but then asks for the number of moles of Krypton (Kr). Assuming the gas in the cylinder is Krypton, we can use the ideal gas law to calculate the number of moles:

PV = nRT

where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the gas constant (0.082 L·atm/mol·K), and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

T = 112°C + 273.15 = 385.15 K

Now we can plug in the values and solve for n:

n = PV/RT

n = (22.8 atm)(17 L)/(0.082 L·atm/mol·K)(385.15 K)

n ≈ 20.3 moles

Therefore, there are approximately 20.3 moles of Krypton in the cylinder.

To know more about the krypton refer here :

https://brainly.com/question/2364337#

#SPJ11

You would need 740.1 grams of oxygen to completely react with 254 grams of tristearin, C₅₇H₁₁₀O₆, in the given reaction.

To find out how many grams of oxygen are needed to completely react with 254 g of tristearin, C₅₇H₁₁₀O₆, in the given reaction, follow these steps:

1. Calculate the molar mass of tristearin (C₅₇H₁₁₀O₆) and oxygen (O₂).
2. Convert grams of tristearin to moles using its molar mass.
3. Use stoichiometry to find the moles of oxygen needed.
4. Convert moles of oxygen to grams using its molar mass.

Molar mass of tristearin: (57 * 12.01) + (110 * 1.01) + (6 * 16.00) = 891.62 g/mol
Moles of tristearin: 254 g / 891.62 g/mol = 0.285 moles
Moles of oxygen needed: 0.285 moles * (163 O₂ / 2 C₅₇H₁₁₀O₆) = 23.16 moles
Molar mass of O₂: 2 * 16.00 = 32.00 g/mol
Grams of oxygen needed: 23.16 moles * 32.00 g/mol = 740.1 g

To know more about stoichiometry click on below link:

https://brainly.com/question/30215297#

#SPJ11

The total KJ of heat that would be released is B. -83.5 kJ

When a something in a liquid or semi-liquid freezes, it undergoes a phase change to a solid state, and this process involves a release of heat.

For example, when water freezes, it releases 333.5 kJ of heat per kg of water that freezes

To be able to calculate the heat released, we need to use the formula:

q = m x Lf

But first, we must convert grams to kg

m = 250 g x (1 kg / 1000 g) = 0.25 kg

q = 0.25 kg x 333.5 kJ/kg

q = 83.375 kJ

The answer is turned to the negative since heat is released.

Find more exercises on heat released;

https://brainly.com/question/24759029

#SPJ1

The difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.

To find the difference in pressure between ideal and non-ideal conditions for CO₂, we need to use the van der Waals equation:

(P + a(n/V)²)(V - nb) = nRT

where P is the pressure, n is the number of moles, V is the volume, T is the temperature, R is the gas constant, a is a constant related to the attractive forces between molecules, and b is a constant related to the volume of the molecules.

First, we need to calculate the volume of the CO₂ molecules using the given values of n and V:

V/n = V/2.0 mol = 7.30 L/2.0 mol = 3.65 L/mol

Next, we can plug in the given values of a, b, n, V, and T into the van der Waals equation:

(P + a(n/V)²)(V - nb) = nRT

(4.50 atm + 3.59 L²･atm/mol²(2.0 mol/3.65 L)²)(7.30 L - 0.0427 L/mol × 2.0 mol) = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K

Simplifying the equation, we get:

(4.50 + 3.59(2.0/3.65)²)(7.30 - 0.0427 × 2.0) = 32.19

Therefore, the non-ideal pressure is:

Pnon-ideal = 32.19 atm

To find the ideal pressure, we can use the ideal gas law:

PV = nRT

Pideal = nRT/V = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K/7.30 L

Pideal = 8.77 atm

Finally, we can calculate the difference in pressure between ideal and non-ideal conditions:

ΔP = Pnon-ideal - Pideal = 32.19 atm - 8.77 atm = 23.42 atm

Therefore, the difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.

Know more about Van der Waals equation here:

https://brainly.com/question/29412319

#SPJ11

There are approximately 0.00614 moles of gas in the sample.

To find the number of moles of gas in the sample, we will use the Ideal Gas Law formula: PV = nRT.

Given:
Volume (V) = 155 mL = 0.155 L (converted to liters)
Temperature (T) = 316 K
Pressure (P) = 0.989 atm
Gas constant (R) = 0.0821 L atm / K mol

We need to find the number of moles (n).

Rearranging the formula for n: n = PV / RT


1. Convert the volume to liters: 155 mL = 0.155 L
2. Plug in the given values into the formula: n = (0.989 atm) x (0.155 L) / (0.0821 L atm / K mol) x (316 K)
3. Simplify the equation and solve for n: n ≈ 0.00614 mol

To know more about Ideal Gas Law click on below link:

https://brainly.com/question/28257995#

#SPJ11

Titan's atmosphere predominantly consists of nitrogen and methane, with traces of other gases, ruling out the possibility of life evolving there in the same manner that it is believed to have done on Earth.

On Earth, nitrogen and oxygen make up the majority of the atmosphere, with traces of other gases. Because they are required for respiration, nitrogen and oxygen are crucial for maintaining life as we know it. On the other hand, no known form of life uses methane, which is a highly reactive and combustible gas. Additionally, any form of life would have a very difficult time surviving on Titan due to its extremely low temperatures, which average around -180°C.

Methane, a greenhouse gas, traps heat from the sun and prevents it from escaping back into space, keeping Titan warmer than the other moons of Saturn. Because it absorbs and then emits infrared radiation, which is the main type of heat energy emitted by the sun, methane is a potent greenhouse gas.

Titan has a far stronger greenhouse effect than Saturn's other moons as a result, which keeps Titan's surface warm. Titan's surface would be significantly colder without the methane greenhouse effect, making it more like the other moons of Saturn.

To know more about greenhouse gases, refer:

https://brainly.com/question/20349818

#SPJ4

Correct question:

Titan is a moon of the planet Saturn Table shows the percentages of the gases in the atmosphere of Titan.  

Percentage of gas in atmosphere (%)

Nitrogen 98

Methane 1

Other gases 0.

Some scientists think that living organisms could have evolved on Titan. Explain why these organisms could not have evolved in the same way that life is thought to have evolved on Earth.

Saturn has other moons. The other moons of Saturn have no atmosphere. Titan is warmer than the other moons of Saturn because its atmosphere contains thegreenhouse gas methane. Explain how this greenhouse gas keeps Titan warmer than the other moons of Saturn.