Answer:
C
Explanation:
[Ne]3s23p1
Answer:
C
Explanation:
Determine the volume of 200 g of hydrogen gas.
Earth is a single interconnected system. True False
Answer:
True
Explanation:
Earth is a single interconnected system but it can be subdivided into smaller systems.
Foods cook faster when placed in a pressure cooker. This is because the pressure on the surface of the water is
Answer:higher than and higher than
Explanation:
10)
Identify the correct formula for hydrochloric acid.
A)
HCL
B)
HCLO
HCLO4
D)
H2C1
Which statement best describes the nuclear model of the atom. A) negative charges dispersed in a positively charged cloud B) positive charges dispersed in a negatively charged cloud C) small, dense positive nucleus surrounded by a diffuse negatively charged cloud D) small, dense negative nucleus surrounded by a diffuse positively charged cloud
Answer:
D.) small, dense negative nucleus surrounded by a diffuse positively charged cloud
Explanation:
I am not 100% sure but the reason I think this is the answer is because Protons and Neutrons are in the nucleus. Protons being positively charged and neutrons being negatively charged. Again, I do not know for sure, but I think D is the answer.
The statement that best describes the nuclear model of the atom is C) small, dense positive nucleus surrounded by a diffuse negatively charged cloud.
The atom is made up of 3 kinds of particles: protons, neutrons and electrons.
Protons (positive charge) and neutrons (zero charge) are in the nucleus, which concentrates 99% of the mass of the atom in 1% of the space. This is why is it positive and very dense.
Electrons (negative charges) are orbiting the nucleus in diffuse negatively charged clouds known as orbitals.
The statement that best describes the nuclear model of the atom is C) small, dense positive nucleus surrounded by a diffuse negatively charged cloud.
You can learn more about the nuclear model of the atom here: https://brainly.com/question/21884993?referrer=searchResults
Particles in a warmer block will have ________ kinetic energy and move ______than the particles in the colder block.
Question options:
more/faster
less/slower
less/faster
more/slower
Answer:
More and Faster
Particles in a warmer block will have more kinetic energy and move faster than the particles in the colder block.
What is kinetic energy?
Kinetic energy is defined as a form of energy that an object or particle has by the reason of its movement.
It is also defined as the measure of the work that an object does by the virtue of its motion.
Kinetic energy can be expressed as
KE = 1/2mv²
Kinetic energy is produced when potential energy is released, triggered into motion by gravity, or chemical reaction among other crystals.
Thus, particles in a warmer block will have more kinetic energy and move faster than the particles in the colder block.
To learn more about kinetic energy, refer to the link below:
https://brainly.com/question/12669551
#SPJ2
Which of the following is an example of a reaction that you've seen in your everyday life?
Question 5 options:
Ice melting
Salt dissolving
Water freezing
Fire burning
Answer:
water freezing
Explanation:
i think so
What reagent is
used to test for starch
Answer:
iodine
Explanation:
In the presence of starch, iodine turns a blue/black colour. It is possible to distinguish starch from glucose (and other carbohydrates) using this iodine solution test. For example, if iodine is added to a peeled potato then it will turn black. Benedict's reagent can be used to test for glucose.
Explain why non ionic compounds are soluble in water ?
The energy associated with motion is
a. kinetic energy
b. elastic potential energy.
c. gravitational potential energy.
d. nuclear energy
Answer:
Kinetic Energy
Explanation:
The form of energy associated with the motion, position, or shape of an object is called mechanical energy. An object's mechanical energy is a combination of its potential energy and its kinetic energy. The basketball has both potential energy and kinetic energy.
Common human behavior that seems to be programmed or directed by genes or hormones?
Answer:
There's a lot...lying...rolling eyes...aggression...mating...parenting...sadness...basically alot
Explanation:
which common substance is an acid?
Answer:
sulfuric acid, phosphoric acid, and nitric acid, citric acid
Explanation:
how many oxygen atoms are there in six dinitrogen monoxide molecules? express your answer as an integer
Answer:
6 oxygen atoms
Explanation:
Step 1: Given data
Number of dinitrogen monoxide molecules (N₂O): 6
Number of oxygen atoms (O): ?
Step 2: Calculate the appropriate ratio
The ratio of dinitrogen monoxide molecules to oxygen atoms is 1:1.
Step 3: Use the ratio to calculate the number of oxygen atoms
6 molecule N₂O × (1 atom O/1 molecule N₂O): 6 atom O
A gas in a large syringe has a volume of 300ml at 45°C. The temperature is lowered to 30°C. What is the new volume of the gas in the syringe? (N and p are constant). Hint:Convert temperature to kelvin before calculating (°C+273=K)
Answer:
V1=300ml
V2= x ml
T1= 45 Celsius
T2= 30 celcius
Do the math....
you will get
318x=90900
divide by 318
x=285.8 ml (rounded)
Explanation:
you have to add 45 and 30 (separately because the temp. has to be in kelvin) to 273... so V2 equals 2858.8 ml
Which of the following could not be responsible for the acceleration of an object?
wind
gravity
density
friction
Answer:
i believe its friction
Explanation:
friction slows down objects
what is the correct parent name for an organic compound just one carbon
Answer:
Meth- its full name is Methane
Explanation:
1 methane
2 ethane
3 propane
4 butane
5 pentane
6 hexane
7 heptane
8 octane
9 nonane
10 decane
11 undecane
12 dodecane
Order the steps required to extract a dichloromethane solution with aqueous hydrochloric acid.
Transfer the "Organic Layer" back to the empty separatory funnel.
b. Add an equivalent volume of aqueous acid to the dichloromethane layer in the separatory funnel.
h. Label this beaker "Aqueous Layer".
Remove the cap.
Label the beaker "Organic Layer".
Make sure the stopcock is closed.
Repeat all steps. Drain the bottom layer into a labeled beaker.
C. Cap the separatory funnel with a glass or Teflon stopper.
e. Place the separatory funnel back in the Iron ring.
Remove the funnel from the iron ring and shake vigorously to mix the layers, periodically venting to release pressure. Drain the remaining liquid into a labeled beaker. Suspend a separatory funnel using an iron ring and ring stand. g.
Allow the layers to physically separate in the funnel. Transfer the organic (dichloromethane) layer to the funnel.
The formatting of the question is a bit scrambled: I'm not sure if there are separate steps that have been unintentionally consolidated into a seemingly discrete step, nor am I sure which letters actually correspond with which step(s). So, for clarity's sake, I treated every sentence as its own step and arranged all of them accordingly. Hopefully, you can then reorganize them according to the labeled steps as you have been provided.
Suspend a separatory funnel using an iron ring and ring stand. Make sure the stopcock is closed. Transfer the organic (dichloromethane) layer to the funnel. Add an equivalent volume of aqueous acid to the dichloromethane layer in the separatory funnel. Cap the separatory funnel with a glass or Teflon stopper. Remove the funnel from the iron ring and shake vigorously to mix the layers, periodically venting to release pressure. Place the separatory funnel back in the Iron ring. Allow the layers to physically separate in the funnel. Remove the cap.Drain the bottom layer into a labeled beaker. Label the beaker "Organic Layer". Drain the remaining liquid into a labeled beaker. Label this beaker "Aqueous Layer". Transfer the "Organic Layer" back to the empty separatory funnel. Repeat all steps.Notes:
The letters have been replaced with numbers only to clarify the order of the steps. No changes were made to the steps themselves, including any stylistic errors.A very few set of sequential steps might be interchangeable, but the steps as separated and organized above is in accordance with standard liquid-liquid extraction protocol.Determining which layers are the "organic" and "aqueous" layers (i.e., whether the organic/aqueous layer, or vice-versa, is on the bottom/top ) is a nontrivial step; for this reason, when actually doing such extractions, the beakers (or whatever vessel) into which the layers are drained at any step are sometimes labeled "top layer" and "bottom layer" in case you misidentify which layers are, in fact, the organic and aqueous layers. Oftentimes, the organic layer is on top of the aqueous layer as many common organic solvents are less dense than water. Halogenated organic solvents, like dichloromethane, are one of the exceptions, and so will generally comprise the bottom layer.How many moles of Nitrogen in 40.0 g of N2O?
.14 g
25.5 g
14.5 g
Answer:
To do this question. we first have to find the mass% of nitrogen in N2O and then, using that percentage, we can simply find the number of moles of N from the number of moles of N2O
Mass % of Nitrogen:
Mass% of nitrogen = (Molar mass of N2 / Molar mass of N2O)*100
Mass% nitrogen = (28 / 44)*100
Mass% of Nitrogen = 0.63 * 100
Mass% nitrogen = 63%
Mass of Nitrogen:
So, now we can say that in any given mass of N2O. 63% of the total mass is the mass of Nitrogen
Hence, total mass * 63/100 = Mass of Nitrogen
Replacing the variables
40 * 0.63 = Mass of Nitrogen
Mass of Nitrogen = 25.2 grams
1. Why is the metal heated in a dry test tube rather than just putting it straight into the boiling water?
Answer:
Students heat up a metal sample by placing it into a test tube suspended in boiling water. Since the water is boiling, the metal evnetually reaches the same temperature as the boiling water: 100oC. ... Putting the metal sample directly into the water – obviously – gets it wet.
The metal is heated in a dry test tube in order to measure the capacity of the metal.
When performing a chemical experiment, it is important to
Have your materials readyMake sure that the mixtures and elements are in the right amountTry as much as possible to have a controlled experimentInstead of putting the metal straight into the boiling water, it is necessary to measure the capacity by heating it in a dry test tube first.
Read more here:
https://brainly.com/question/20552555
Fran finds a dark-colored rock that she identifies as basalt. Which property gives the rock its dark color?
O its shape
O its banding
its grain size
O its mineral content
Answer:
Mineral Content.
Explanation:
shape has nothing to do with the color displayed.
Nor does the grain size.
I don't know what banding is. Whatever it is, it is not the answer.
D: mineral content.
How many moles of sodium sulfate are present in .100 g of the compound?
2.126 x 10^-3 mol
174.3 mol
7.040 x 10^-4 mol
Answer:
7.040 x 10^-4 mol
Explanation:
How are ionic compounds named? (APEX!)
A. A number is given in parentheses after each elements name to indicate the number of atoms
B. The name of the first element is followed by that of the second element, the latter of which ends in -ide
C. The name of each element is followed by a To indicate the number of atoms
D. A prefix is used which each elements name, and the second element is change the end in -ine
The ionic compounds are named as The name of the first element is followed by that of the second element, the latter of which ends in -ide. Hence Option (B) is the correct.
What are Ionic Compound ?
In chemistry, an ionic compound is a chemical compound composed of ions held together by electrostatic forces termed ionic bonding.
The compound is neutral overall, but consists of positively charged ions called cations and negatively charged ions called anions.
For binary ionic compounds (ionic compounds that contain only two types of elements), the compounds are named by writing the name of the cation first followed by the name of the anion.
For example, KCl, an ionic compound that contains K+ and Cl- ions, is named potassium chloride.
Therefore, The ionic compounds are named as The name of the first element is followed by that of the second element, the latter of which ends in -ide. Hence Option (B) is the correct.
Learn More about Ionic Compound here :
https://brainly.com/question/26059401
#SPJ2
This image represents what?
A) Atom of nitrogen
B) mixture of nitrogen atoms
C) compound containing nitrogen
D) molecule of diatomic nitrogen
Answer:
IT’S D)molecule of diatomic nitrogen
Explanation:
Thx to the person above though..........
Answer:
D
Explanation:
A system initially has a pressure of 12 atm and a volume of 9 L. What is the volume if the pressure is decreased to 6 atm?
Answer:
The answer is 18 LExplanation:
In order to find the volume , we use the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we are finding the final volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
From the question
P1 = 12 atm
V1 = 9 L
P2 = 6 atm
We have
[tex]V_2 = \frac{12 \times 9}{6} = \frac{108}{6} \\ [/tex]
We have the final answer as
18 LHope this helps you
What is the end
result of a chemical reaction?
Chemical reactions occur when chemical bonds between atoms are formed or broken. The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products.
The end of a chemical reaction is the product.
What is a chemical reaction?
A chemical reaction contains a reactant that reacts to form products. The reactant can be more than two, and the product can be two or more.
Food spoiling is a chemical reaction because it has an unpleasant odor, taste, and color change. Fruits undergo a chemical shift as they ripen. For instance, both the texture and color may change.
When we balance a chemical process, the number of moles or atoms on the left must match the amount on the right. Thus, the atoms participating in such a chemical process are discovered to have mass.
Chemical elements are uncontaminated by impurities or other elements and are pure substances made up of just one type of atom. They are found in the crust of the earth. Carbon, hydrogen, and oxygen are some examples.
Therefore, the end is the product.
To learn more about chemical reactions, refer to the below link:
https://brainly.com/question/22817140
#SPJ2
why do we fill balloons with helium gas instead of oxygen gas
Answer: cause oxegeon is harmful then helium
Explanation:
HURRY PLEASE HELP!! The combustion of methane begins with 1 carbon atom and 4 hydrogen atoms in the compound CH4 How many hydrogen atoms will be
found as a product?
A. 3
B. 4
C. 1
D. 2
Answer:
B, 4.
Explanation:
i just took this
Which of the following is an example of a buoyant force acting on a piece of
bread?
O A. The piece of bread floats on the surface of a lake.
B. The piece of bread travels in uniform circular motion.
C. The piece of bread remains still despite an applied force.
D. The piece of bread travels with straight-line horizontal
acceleration.
An example of the buoyant force on a piece of bread is the piece of bread floats on the surface of body water such as a lake.
What is the buoyant force?This is a force experienced by objects when they are in a body of water. This force implies objects have an upward force, which in many cases causes them to float.
What are some examples of this force?Any object that is submerged in water but floats or shows to have an upward force is an example of this force. Based on this, the option that clearly shows the buoyant force is a bread floating on a lake.
Learn more about buoyant force in: https://brainly.com/question/21990136
Answer:
A
Explanation:
does hydrogen builds all the acids??
Answer:
hydrogen builds many acids but not all
1. The elements in a compound
a. Combine by reacting with each other
b. Join in a specific ratio
c. Can be separated using chemical means
d. All of the above
Answer:
d.All of the above
Explanation:
They can do all of the above