using the simplified expression 1.2p, explain what it means to have 20% more of a given quantity 

Fire barriers and fire partitions are both used in building design to prevent the spread of fire. However, there are some differences between the two that are important to understand.

Fire partitions are used to divide a building into smaller fire compartments, and they have a fire resistance rating of at least one hour. They are designed to keep smoke and flames from spreading from one compartment to another.

Fire barriers, on the other hand, are designed to prevent the spread of fire and smoke between different types of occupancies (e.g. between a storage facility and an office building). Fire barriers are usually required to have a fire resistance rating of two or three hours.

Fire barriers and partitions are both required to have fire-resistant walls, floors, and ceilings. However, fire barriers are required to have additional features, such as fire doors and smoke dampers, to ensure that they are effective at preventing the spread of fire.

Fire barriers must also be tested and certified by a third-party testing agency to ensure that they meet the required fire resistance ratings.

To know more about partitions visit:

https://brainly.com/question/32329065

#SPJ11

Ea = (8.314 / 1000) * (ln(0.360 / 0.915)) / (1 / (727 K) - 1 / (375 K))

Calculating the above expression will give us the activation energy in kilojoules per mole (kJ/mol).

To calculate the activation energy (Ea) of a reaction using the rate constants at different temperatures, we can use the Arrhenius equation:

k = A * e^(-Ea / (R * T))

Where:

k is the rate constant

A is the pre-exponential factor

Ea is the activation energy

R is the gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin

Given:

k1 = 0.360 min^(-1) at 375 K

k2 = 0.915 min^(-1) at 727 K

Taking the natural logarithm of both sides of the Arrhenius equation, we have:

ln(k1) = ln(A) - (Ea / (R * T1))

ln(k2) = ln(A) - (Ea / (R * T2))

Subtracting the second equation from the first, we get:

ln(k1) - ln(k2) = (Ea / (R * T2)) - (Ea / (R * T1))

ln(k1/k2) = Ea / R * (1 / T2 - 1 / T1)

Now we can rearrange the equation to solve for Ea:

Ea = R * (ln(k1/k2)) / (1 / T2 - 1 / T1)

Converting the gas constant R to kJ/(mol·K), which is the desired unit for activation energy, by dividing by 1000, we have:

Ea = (8.314 J/(mol·K) / 1000) * (ln(k1/k2)) / (1 / T2 - 1 / T1)

Now, we can plug in the values and calculate the activation energy Ea:

Ea = (8.314 / 1000) * (ln(0.360 / 0.915)) / (1 / (727 K) - 1 / (375 K))

To know more about dividing visit:

brainly.com/question/15381501

#SPJ11

The losses in power by the jump is -15546.1 W.V. Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.

To determine the characteristics of the hydraulic jump, we can use the principles of conservation of mass and energy.

Given the following information:

Flow rate (Q) = 15 m³/s

Width of the floor (b) = 3 m

Upstream depth (h₁) = Im (unknown)

Upstream velocity (V₁) = 5 m/s

i). The downstream depth required to cause a hydraulic jump:

To determine the downstream depth (h₂),

we can use the energy equation:

h₂ = h₁ + (V₁² / (2g)) - (Q² / (2g × b² × h₁²))

Where g is the acceleration due to gravity.

ii). Height of the hydraulic jump:

The height of the hydraulic jump (H) can be calculated using the specific energy equation:

[tex]H=(V_1^2 / (2g)) * ((1 + (Q / (b * V_1 * h_1)))^{(2/3)} - 1)[/tex]

iii). The loss in energy head:

The loss in energy head (ΔE) can be calculated by subtracting the specific energy at the hydraulic jump (E₂) from the specific energy at the upstream condition (E₁):

ΔE = E₁ - E₂

ΔE = (V₁² / (2g)) - (V₂² / (2g)) + g × (h₁ - h₂)

iv). The losses in power by the jump:

The power loss (Ploss) can be calculated by multiplying the loss in energy head (ΔE) by the flow rate (Q):

Ploss = ΔE × Q

The losses in power by the jump is -15546.1 W.V.

v). The type of flow after the jump:

The type of flow after the jump can be determined based on the Froude number (Fr₂) calculated using the downstream depth (h₂) and downstream velocity (V₂):

Fr₂ = V₂ / √(g × h₂)

If Fr₂ < 1, the flow is subcritical (tranquil flow).

If Fr₂ > 1, the flow is supercritical (rapid flow).

Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.

Therefore, the losses in power by the jump is -15546.1 W.V. Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.

To know more about energy, visit

https://brainly.com/question/1932868

#SPJ11

The number of grams of oxygen required for the complete reaction of 9.67 moles of phosphorus is approximately 781.6 grams.

According to the balanced chemical equation:

4P + 5O2 → 2P2O5

The stoichiometric ratio between phosphorus and oxygen is 4:5. This means that for every 4 moles of phosphorus, 5 moles of oxygen are required to completely react.

Given that we have 9.67 moles of phosphorus, we can set up a proportion to calculate the moles of oxygen required:

4 moles of phosphorus / 5 moles of oxygen = 9.67 moles of phosphorus / X moles of oxygen

Solving for X, we find:

X = (5 moles of oxygen * 9.67 moles of phosphorus) / 4 moles of phosphorus

Now we can convert moles of oxygen to grams using the molar mass of oxygen (O2) which is approximately 32 g/mol:

Grams of oxygen = X moles of oxygen * molar mass of oxygen

By plugging in the calculated value of X, we can determine the grams of oxygen required for the complete reaction.

Learn more about phosphorus visitl

https://brainly.com/question/25352398

#SPJ11

The answer is:

a = 15

Work/explanation:

Plug in 9 for B :

[tex]\sf{3a + b =54}[/tex]

[tex]\sf{3a + 9 =54}[/tex]

Subtract 9 from each side:

[tex]\sf{3a=45}[/tex]

Divide each side by 3:

[tex]\sf{a=15}[/tex]

Answer:   the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.

The mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 can be determined using the given information.

Step 1: Calculate the absolute volume of fine aggregate:
Absolute volume of fine aggregate = (content of fine aggregate in kg per cubic meter) / (density of fine aggregate in kg/m3)
Absolute volume of fine aggregate = 600 kg/m3 / 2370 kg/m3
Absolute volume of fine aggregate = 0.253

Step 2: Calculate the absolute volume of entrapped air:
Absolute volume of entrapped air = (volume of entrapped air in %) / 100
Absolute volume of entrapped air = 2% / 100
Absolute volume of entrapped air = 0.02

Step 3: Calculate the absolute volume of coarse aggregate:
Absolute volume of coarse aggregate = 1 - (w/c + absolute volume of fine aggregate + absolute volume of entrapped air)
Absolute volume of coarse aggregate = 1 - (0.4 + 0.253 + 0.02)
Absolute volume of coarse aggregate = 0.327

Step 4: Calculate the weight of fine aggregate:
Weight of fine aggregate = (absolute volume of fine aggregate) * (density of fine aggregate)
Weight of fine aggregate = 0.253 * 2370 kg/m3
Weight of fine aggregate = 600 kg

Step 5: Calculate the weight of coarse aggregate:
Weight of coarse aggregate = (absolute volume of coarse aggregate) * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (2.67 * 1000) kg/m3
Weight of coarse aggregate = 878.7 kg

Step 6: Calculate the weight of water:
Weight of water = (w/c) * (weight of cement)
Weight of water = 0.4 * (weight of cement)

Step 7: Calculate the weight of cement:
Weight of cement = (weight of water) / (w/c)
Weight of cement = (weight of water) / 0.4

Based on the given information, the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.

To learn more about volume of coarse aggregate:

https://brainly.com/question/33592443

#SPJ11

If E is L-non-measurable, then there exists a proper subset B of E such that 0 < μ∗(B) < ∞.

In measure theory, a set E is said to be L-non-measurable if it does not have a well-defined measure. This means that there is no consistent way to assign a non-negative real number to every subset of E that satisfies certain properties of a measure.

Now, if E is L-non-measurable, it implies that the measure μ∗(E) of E is either undefined or infinite. In either case, we can find a proper subset B of E such that the measure of B, denoted by μ∗(B), is strictly greater than 0 but less than infinity.

To see why this is true, consider the following: Since E is L-non-measurable, there is no well-defined measure on E. This means that there are subsets of E that cannot be assigned a measure, including some subsets that have positive "size" or "content." We can then choose one such subset B that has a positive "size" according to an informal notion of size or content.

By construction, B is a proper subset of E, meaning it is not equal to E itself. Moreover, since B has positive "size," we can conclude that 0 < μ∗(B). Additionally, because B is a proper subset of E, it cannot have the same "size" as E, which implies that μ∗(B) is strictly less than infinity.

In summary, if E is L-non-measurable, we can always find a proper subset B of E such that 0 < μ∗(B) < ∞.

In measure theory, the concept of measurability is fundamental in defining measures. Measurable sets are those for which a measure can be assigned in a consistent and well-defined manner. However, there exist sets that are not measurable, known as non-measurable sets.

The existence of non-measurable sets relies on the Axiom of Choice, a principle in set theory that allows for the selection of an element from an arbitrary collection of sets. It is through this axiom that we can construct non-measurable sets, which defy a well-defined measure.

Learn more about proper subset

brainly.com/question/31569950

#SPJ11

The pipe diameters on the drive line using the Darcy-Weisbach method are

D_pvc = 3.18 inches and D_steel = 2.98 inches.

The given problem deals with the determination of the pipe diameters on the drive line using the Darcy-Weisbach method, calculating the dimensions of the regulating tank, and calculating the pump power by taking into account a calculated safety factor within your pump TDH calculations.

Let us solve the problem step by step:Given Data:

Flow Rate, Q design = 500 GPM

Pressure at the discharge point, P = 5 m

Efficiency of the pump, η = 70%Depth, h = 80 ft

Friction factor for PVC, f_pvc = 0.016

Friction factor for Steel, f_steel = 0.022.

Therefore,

The dimensions of the regulating tank are L = 79.7 ft.

The Pump Power is P = 170.32 HP.

To know more about pump visit:

https://brainly.com/question/31064126

#SPJ11

The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The answer is 7.001 mg O₂ kg¯¹ hr¯¹.

Metabolic rate refers to the total energy expenditure per unit time by an organism. Mass-specific metabolic rate of the crab refers to the quantity of oxygen that a crab consumes per unit time. In this question, the metabolic rate of the crab is determined by measuring the oxygen consumed by the crab in a sealed chamber filled with sand and seawater. The oxygen electrode reading is used to quantify the oxygen consumption rate of the crab. The mass of the crab, sand and water are used to determine the total mass of the system.

Mass-specific metabolic rate of the crab refers to the quantity of oxygen that a crab consumes per unit time.

Oxygen consumption rate can be used to quantify the metabolic rate. MO₂ of the crab can be determined as:

Oxygen consumed = 7.36 mg/L - 6.71 mg/L

= 0.65 mg/L (in 2.5 hours)

At a temperature of 20°C, the oxygen solubility in seawater is 210 µmol O₂/L.

The volume of the chamber,

V = 470 mL

= 0.47 L

Mass of water = volume of water x density of water

= 0.47 L x 1.02 g/mL

= 0.4794 g

Mass of sand = 1500 g – 479.4 g

= 1020.6 g

Mass of the crab,

M = 532 mg

= 0.532 g

Therefore, Total mass, T = M + mass of sand + mass of water

= 0.532 g + 1020.6 g + 0.4794 g

= 1021.61 g

= 1.02161 kg

The mass-specific metabolic rate of the crab can be calculated as:

MO₂ = (Oxygen consumed / T) × (1000/1) × (1/2.5) × (1/3600)

MO₂ = 0.65 mg/L x (1000/1) × (1/2.5) × (1/3600) x (1/1.02161)

= 7.001 mg O₂ kg¯¹ hr¯¹

The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The answer is 7.001 mg O₂ kg¯¹ hr¯¹.

Mass-specific metabolic rate of the crab is the quantity of oxygen that a crab consumes per unit time. The metabolic rate of the crab can be determined by measuring the oxygen consumed by the crab in a sealed chamber filled with sand and seawater. The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The mass-specific metabolic rate of the crab is 7.001 mg O₂ kg¯¹ hr¯¹.

To know more about volume visit:

brainly.com/question/28058531

#SPJ11

The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is not equal to the load intensity at that point. The shear force intensity at that point is always different than zero.

The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is one of the fundamental relationships of shear force and bending moment that is significant in the study of beams. This relationship is important to comprehend because the slopes of these diagrams offer critical information on the shape and magnitude of internal forces and moments that act within the beam.

The shear force intensity at that point is always different than zero. This is because shear force is the internal force that arises to balance out the external loads that act on the beam. This implies that at any point of the beam, the shear force intensity is always present to support the load intensity at that point.

To know more about shear force intensity visit:

https://brainly.com/question/30763282

#SPJ11

The cracking moment of the T-beam is approximately 1.21 x 10^6 Nmm.

To calculate the cracking moment of a T-beam, we need to consider the dimensions and reinforcement of the beam, as well as the loads it will be subjected to.
Given:
- bf = 600mm (width of the flange)
- h = 500mm (overall height of the beam)
- hf = 100mm (height of the flange)
- bw = 300mm (width of the web)
- Span = 3m
- Reinforcement: 5-20mm diameter rebar for tension, 2-20mm diameter rebar for compression
- Dead load = 20kN/m
- Live load = 10kN/m
- fe' = 21MPa (characteristic strength of concrete)
- fy = 415MPa (yield strength of reinforcement)
- d' = 60mm (effective depth)
- cc = 40mm (clear cover)
- Stirrups = 10mm
Step 1: Calculate the area of the reinforcement for tension and compression.
- Area of reinforcement for tension: As = (π/4) x (5mm)^2 x number of bars
- Area of reinforcement for compression: Ac = (π/4) x (2mm)^2 x number of bars
Step 2: Calculate the effective depth (d) and the lever arm (a).
- Effective depth (d): d = h - cc - (bar diameter/2) = 500mm - 40mm - (20mm/2) = 460mm
- Lever arm (a): a = d - (hf/2) = 460mm - (100mm/2) = 410mm
Step 3: Calculate the moment of inertia (I).
- Moment of inertia (I): I = (bw x hf^3)/12 + (bf x (h - hf)^3)/12
Step 4: Calculate the cracking moment (Mcr).
- Cracking moment (Mcr): Mcr = (fe' x I)/(d - a)
Let's plug in the given values and calculate the cracking moment:
Step 1:
- Area of reinforcement for tension: As = (π/4) x (20mm)^2 x 5 = 1570mm^2
- Area of reinforcement for compression: Ac = (π/4) x (20mm)^2 x 2 = 628mm^2
Step 2:
- Effective depth (d): d = 500mm - 40mm - (20mm/2) = 460mm
- Lever arm (a): a = 460mm - (100mm/2) = 410mm
Step 3:
- Moment of inertia (I): I = (300mm x 100mm^3)/12 + (600mm x (500mm - 100mm)^3)/12
 = 8333333.33mm^4
Step 4:
- Cracking moment (Mcr): Mcr = (21MPa x 8333333.33mm^4)/(460mm - 410mm)
 = 1.21 x 10^6 Nmm
Therefore, the cracking moment of the T-beam is approximately 1.21 x 10^6 Nmm.

To learn more about beam

https://brainly.com/question/31681764

#SPJ11

7. The main difference between reading volumes on burets and reading volumes on graduated cylinders is the precision of the measurements.

8. A "banging drop" is a term used in titration experiments. It refers to a sudden, sharp change in the color of the solution being titrated.

9. It is important to rinse pipets and burets with the solution they will contain in order to ensure accurate measurements and prevent contamination.

10. The equation used to calculate the molarity of acetic acid from titration data depends on the reaction being carried out and the stoichiometry of the reaction.

7.Burets are typically used in titrations, where the volume needs to be measured very accurately. Burets have a smaller scale and a finer graduation, allowing for more precise measurements compared to graduated cylinders.

8.This change occurs when the titrant is added in excess and reacts with the indicator, causing a noticeable change in the color of the solution.

9. Rinsing removes any residual substances or impurities that may be present in the pipet or buret. By rinsing with the solution to be used, any remaining substances are replaced with the solution, ensuring that only the desired solution is present for accurate measurements.

10. Generally, the equation will involve the balanced chemical equation for the reaction and the volume of the titrant used. For example, if acetic acid is being titrated with a strong base like sodium hydroxide, the equation would be:

Molarity of acetic acid (CH3COOH) = (Molarity of NaOH) x (Volume of NaOH) / (Volume of acetic acid)

The exact equation may vary depending on the specific titration and the reaction being studied.

Learn more about titration at

https://brainly.com/question/29665786

#SPJ11

The correct statement regarding the center of mass of a composite body is that it is calculated as the sum of the product of the mass of each figure involved divided by the total mass of the object.

The centre of mass of a composite body is determined by multiplying the total mass of the object by the sum of the products of the masses of all the figures that make up the composite body. Since it may be calculated by straightforward addition and division, this method does not always require integration.

The centre of mass is determined by adding the masses of all the individual components of the composite body and dividing the result by the distance between each component's centroid and a coordinate axis placed on the item.

The center of mass and the center of gravity of a composite object are not necessarily the same. The center of gravity specifically refers to the point where the entire weight of the object can be considered to act, while the center of mass refers to the average position of the mass distribution. In a uniform gravitational field, the center of gravity coincides with the center of mass, but in other cases, they may differ.

To know more about mass:

https://brainly.com/question/941818

#SPJ4

It is generally considered unethical for Engineer A to notify clients of Engineer B about their plans to start another engineering firm while still being employed by Engineer B.

Engineer A's actions of notifying clients of Engineer B while still employed can be seen as unethical. Here's a step-by-step explanation:

1. As an employee of Engineer B, Engineer A has a duty of loyalty and confidentiality to their employer. This means that Engineer A should prioritize the interests of Engineer B and not engage in activities that could potentially harm the company.

2. By notifying clients of Engineer B about their plans to start another engineering firm, Engineer A is essentially soliciting business while still being employed by Engineer B. This can be seen as a breach of loyalty and a conflict of interest.

3. Engineer A's actions could potentially harm Engineer B's business by diverting clients and future work opportunities away from Engineer B. This is particularly problematic if Engineer A uses their position at Engineer B to gain an unfair advantage in securing clients for their new firm.

4. It is generally considered ethical for employees to refrain from engaging in activities that could harm their current employer until they have officially left the company. This includes soliciting clients and promoting personal business ventures.

5. Engineer A could have chosen to wait until after their employment with Engineer B ended to inform clients about their new engineering firm. This would have avoided any potential conflicts of interest and upheld their ethical responsibilities as an employee.

In summary, it is generally considered unethical for Engineer A to notify clients of Engineer B about their plans to start another engineering firm while still being employed by Engineer B. Engineer A should have waited until after their employment ended to pursue business opportunities for their new firm.

Learn more at: https://brainly.com/question/14864299

#SPJ11

The following derivatives. z and Z₁, where z = 6x + 3y, x = 6st, and y = 4s + 9t, the value of Zs =0

Here, we have,

To find the derivative of z with respect to s and t, we can use the chain rule.

Let's start by finding ∂z/∂s:

z = 6x + 3y

Substituting x = 6st and y = 4s + 9t:

z = 6(6st) + 3(4s + 9t)

z = 36st + 12s + 27t

Now, differentiating z with respect to s:

∂z/∂s = 36t + 12

Next, let's find ∂z/∂t:

z = 6x + 3y

Substituting x = 6st and y = 4s + 9t:

z = 6(6st) + 3(4s + 9t)

z = 36st + 12s + 27t

Now, differentiating z with respect to t:

∂z/∂t = 36s + 27

So, the derivatives are:

∂z/∂s = 36t + 12

∂z/∂t = 36s + 27

Now, let's find Zs. We have the equation Z = 4s = 0,

which implies that 4s = 0.

To solve for s, we divide both sides by 4:

4s/4 = 0/4

s = 0

Therefore, Zs = 0.

To know more about derivatives refer-

brainly.com/question/27986273

#SPJ4

complete question:

Find the following derivatives. z and Z₁, where z = 6x + 3y, x = 6st, and y = 4s + 9t Zs = (Type an expression using s and t as the variables.) 4=0 (Type an expression using s and t as the variables

a. The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂

b. Heat of reaction is -1378 KJ/mol.

c. Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.

Given that,

a. We have to find the balanced equation for this reaction.

The balance equation for fermentation of glucose is

C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂

Therefore, The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂

b. We have to calculate the heat of reaction if 20 mol of glucose are degraded in this reaction using standard heat of formation values.

Standard heat of formation of Glucose is 1273.3 KJ/mol

Standard heat of formation of Ethanol is 277.6 KJ/mol

Standard heat of formation of Carbon dioxide is 393.5 KJ/mol

Number of mole of glucose are 20 mole

Number of moles of ethanol formed in complete reaction is 2×20 = 40 mole

Number of moles of Carbon Dioxide formed in complete reaction is 2×20 = 40 mole

Heat of reaction = ΔH (products) – ΔH (reactants)

So,

Heat of products is 40 × (-277.6) + 40 × (-393.5) =  -26,844 KJ/mol

Heat of reactants is 20 × (-1273.3)=  -25,466 KJ/mol

Heat of reaction = -26,844 - (-25,466)= -1378 KJ/mol

Therefore, Heat of reaction is -1378 KJ/mol.

c. Let the reaction does not go to completion.

In the event where the fractional conversion of glucose is 0.7, we must determine the heat of reaction.

The fractional conversion of glucose is 0.7

Number of glucose that will react = 0.7 × 20 = 14 mole

So, only 14 mole of glucose will react. Rest 6 moles would not undergo reaction and there will not be considered.

Number of moles of ethanol formed = 2 × 14= 28 mole

Number of moles of carbon dioxide formed= 28 mole

Now calculation heat of reaction

Heat of products is 28 × (-277.6) + 28 × (-393.5) =  -18790.8 KJ/mol

Heat of reactants is 14 × (-1273.3)=  -17826.2 KJ/mol

Heat of reaction = -18790.8 - (-17826.2)= -964.6 KJ/mol

Therefore, Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.

To know more about reaction visit:

https://brainly.com/question/517776

#SPJ4

To increase the volume of a gas in a container we must decrease the surface area of the container. There are the same number of molecules in the container when the volume of the container is changed.

Pressure in force/area. As the volume of the gas increases then the area decreases and so the pressure of the gas decreases. To increase the volume of a gas in a container we must decrease the surface area of the container. The volume of a gas in a container increases when the surface area of the container decreases. For instance, when the container's lid is opened, the volume of the gas expands and occupies more space. In order to increase the volume of gas, the surface area must decrease. There are the same number of molecules in the container when the volume of the container is changed.

Changing the volume of a container has no effect on the number of gas molecules in it. The total number of gas molecules remains constant when the volume is increased or decreased. Changing the volume of a gas in a container does not change the number of gas molecules inside it. Pressure in force/area. As the volume of the gas increases then the area decreases and so the pressure of the gas decreases. According to Boyle's Law, the pressure of a gas is inversely proportional to its volume when the temperature is constant. If the volume of a gas is increased, the area decreases, and pressure of the gas decreases. Therefore, when the volume of gas is increased, the pressure of gas decreases.

To know more about volume visit:

https://brainly.com/question/28058531

#SPJ11

Answer:

the correct answers are:

a) Increase

b) The same

c) Decreases

Step-by-step explanation:

a) To increase the volume of a gas in a container we must [increase; decrease] the surface area of the container.

Answer: Increase

b) There are [the same; fewer] number of molecules in the container when the volume of the container is changed.

Answer: The same

c) Pressure is force/area. As the volume of the gas increases, then the area [increases; decreases] and so the pressure of the gas [increases; decreases].

Answer: Decreases

to know more about volume and pressure of gas visit:

https://brainly.com/question/15917752

#SPJ11

We can conclude that for any given sequence (an​)n=1,2,3,…​, the values of the sequence lie in the closed interval [1,4]. For any n=1,2,3,…, an​=(1)×(2)0^n+(3)×(4)(2)>(4) satisfies the inequality 1 ≤ an​ ≤ 4.

Let a sequence (an​)n=1,2,3,…​ satisfy  

Then, for any n=1,2,3,…, an​=(1)×(2)0^n+(3)×(4)(2)>(4).

The formula for the given sequence is an​=(1)×(2)0^n+(3)×(4)(2)>(4).

We can observe that an​ is a weighted average of the two numbers 2^0 = 1 and 4^1 = 4 i.e, an​ = (1/4) × (4) + (3/4) × (1)

An equivalent way to express this is an​=(3/4)(1)+(1/4)(4)

Using the above representation, we can say that (an​) is a convex combination of the numbers 1 and 4.

Hence, we can conclude that for any given sequence (an​)n=1,2,3,…​, the values of the sequence lie in the closed interval [1,4].

Therefore, for any n=1,2,3,…, an​=(1)×(2)0^n+(3)×(4)(2)>(4) satisfies the inequality 1 ≤ an​ ≤ 4.

To know more about inequality visit:

https://brainly.com/question/20383699

#SPJ11

Answer:

$46.88 and $28.13

Step-by-step explanation:

A ratio has two or more numbers that symbolize relation to each other. Ratios are used to compare numbers, and you can compare them using division.

To solve a part-part ratio problem, we need to follow these steps:

If two people share some money in the ratio 3:5 and one person gets $75, you can find out two possible values with the amount of money the other person gets by doing this:

The total number of parts in the ratio is:

The value of one part is:

The amount of money the other person gets is either:

Or:

Therefore the two possible values are $46.88 and $28.13.

To complete the table for y = 5/x, we substitute different x-values and calculate the corresponding y-values. The table includes x-values of 0.5, 1, 2, 3, 4, 5, and 6, with their respective y-values of 10, 5, 2.5, 1.6667, 1.25, 1, and 0.8333 (approximated to 4 decimal places).

We are given the equation y = 5/x and are asked to complete the table of values for this equation.

To do this, we need to substitute different values of x into the equation and calculate the corresponding values of y.

Let's start with the first entry in the table:

For x = 0.5, we substitute this value into the equation:

y = 5 / 0.5 = 10

So, when x is 0.5, y is 10.

Moving on to the next entry:

For x = 1, we substitute this value into the equation:

y = 5 / 1 = 5

So, when x is 1, y is 5.

We continue this process for the remaining values of x:

For x = 2, y = 5 / 2 = 2.5

For x = 3, y = 5 / 3 ≈ 1.6667 (approximated to 4 decimal places)

For x = 4, y = 5 / 4 = 1.25

For x = 5, y = 5 / 5 = 1

For x = 6, y = 5 / 6 ≈ 0.8333 (approximated to 4 decimal places)

By substituting each x-value into the equation, we have calculated the corresponding y-values for the given equation.

For more such information on: table

https://brainly.com/question/12151322

#SPJ8

That W100x15 is the lightest available W-section of Gr. 50 steel which can be used for the given beam. The lightest W-section with a Z-value equal to or greater than the required value of 21,875 cm³ is W100x15 which has a b/d ratio of 12.04/9.15.

Service Dead Load = 3kN/m,

including self weight service

Live Load = 4kN/mLength of span (L) = 10mNominal depth of beam provided at ends and 1/3 point of span cb equivalent to 1.0

.Solution:

From the given data, the service load acting on the beam will be equal to:

(3 + 4) kN/m = 7 kN/mTotal Load on the beam,

W = 7 kN/m x 10 m = 70 kN/m

For a beam which is simply supported at one end and fixed at the other end, the maximum bending moment will occur at the fixed end and its value will be:Max Bending Moment,

M = WL/8 = 70 x 10 x 10 / 8 = 875 kN-m

Now, we know that the moment of inertia (I) of a W-section of given size is constant for all the sections having the same size.Hence, the selection of the lightest available W-section depends only on the section modulus (Z). The section modulus is given as:

Z = (1/6) x b x d²

where b = width of the beam and

d = depth of the beam.For maximum efficiency,

the section with the least weight would have the least value of b/d ratio. Hence, we select the W-section with the smallest possible b/d ratio and which also has a Z-value equal to or greater than the required value of the section modulus.The required section modulus of the beam is calculated as follows:

Section modulus,

Z = (M/S) = (σ_y × M) / cbwhere

S = allowable stress (σ_y)

cb = L / 10We can assume that the allowable stress σ_y is equal to 250 MPa for Gr. 50 steel.

To know more about value visit:
https://brainly.com/question/30145972

#SPJ11

To calculate the rate of return for the extra investment, we need more information such as the cash inflows from the extractor and the alternate equipment. Without this information, it is not possible to determine the rate of return.

To calculate the rate of return, we would need the cash inflows generated by both the existing extractor and the alternate equipment. Cash inflows could come from the sale of vegetable oil or any other revenue generated by using the equipment. Without these values, we cannot calculate the rate of return.

Additionally, the rate of return calculation would also require the initial investment, salvage value, and the time period considered. In this case, the initial cost and salvage value for the existing extractor are provided, but we still need the initial cost and salvage value for the alternate equipment.

Without the necessary data, it is not possible to determine the rate of return for the extra investment in the extractor replacement.

The calculation of the rate of return for the extra investment in the extractor replacement cannot be determined without knowing the cash inflows from both the existing extractor and the alternate equipment.

To k ow more about rate visit:

https://brainly.com/question/119866

#SPJ11

The TCE concentration in the soil sample is 6 ppmm.

[tex]ppmm = (mg of TCE)/(kg of soil) * 10^6[/tex]

In this case, we have:

mg of TCE = 30 mg

kg of soil = 5 kg

Substituting these values into the formula, we get:

[tex]ppmm = (30 mg)/(5 kg) * 10^6 = 6 ppmm[/tex]

Therefore, the TCE concentration in the soil sample is 6 ppmm.

Trichloroethylene (TCE) is a colorless, non-flammable liquid that is used in a variety of industrial processes, including metal degreasing, dry cleaning, and paint stripping. It is also a common groundwater contaminant, as it can easily leach from soil and into water.

The safe level of TCE concentration in drinking water varies depending on the source of the water. The Environmental Protection Agency (EPA) has set a maximum contaminant level (MCL) of 5 micrograms per liter (µg/L) for TCE in drinking water. This means that the average concentration of TCE in drinking water should not exceed 5 µg/L.

However, some people may be more sensitive to TCE than others. For example, pregnant women and young children may be at an increased risk for health problems from exposure to TCE. If you are concerned about your exposure to TCE, you should talk to your doctor.

Learn more about concentration  with the given link,

https://brainly.com/question/17206790

#SPJ11

Navier Stokes For Blood Clot region - Velocity Profile and Net Momentum loss.

The Navier-Stokes equation is a set of equations in fluid mechanics that represents the conservation of mass, momentum, and energy. It's a complicated set of nonlinear partial differential equations that describe fluid motion in three dimensions. The flow of blood is a complex fluid flow that is affected by numerous factors, including flow velocity, blood vessel wall properties, and fluid viscosity.

                                      To investigate blood flow, the Navier-Stokes equation may be used. The velocity profile and net momentum loss are then determined using the Navier-Stokes equation. The following is the detailed answer for this question:Velocity Profile:Velocity is a vector quantity that represents the rate of motion in a particular direction. Blood flow velocity is a critical indicator of vascular health.

                                      The velocity profile in the Navier-Stokes equation is determined by determining the velocity at various points in a given fluid. This is accomplished by solving a set of differential equations that take into account the fluid's viscosity, density, and other physical properties.Net Momentum Loss:When a fluid flows through a blood vessel, it exerts a force on the vessel walls. This is referred to as a momentum transfer.

The momentum transfer rate, which is the rate at which momentum is transferred to the vessel walls, is determined using the Navier-Stokes equation. The momentum transfer rate is determined by integrating the fluid's momentum flux over the vessel's cross-sectional area. The net momentum loss can be calculated by subtracting the momentum transfer rate from the initial momentum of the fluid.

Learn more about Navier-Stokes equation

brainly.com/question/29181204

#SPJ11

a. The electron configuration for the element Te is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁴.b. The electron configuration for the element Cr is 1s²2s²2p⁶3s²3p⁶3d⁵4s¹.c. The electron configuration for the ion Zn²⁺ is 1s²2s²2p⁶3s²3p⁶3d¹⁰.

Te: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁴Cr: 1s²2s²2p⁶3s²3p⁶3d⁵4s¹Zn²⁺: 1s²2s²2p⁶3s²3p⁶3d¹⁰.

This question is divided into three parts where the electron configurations of three elements are asked.

The electron configuration of the first element which is Te is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁴.

The electron configuration of the second element which is Cr is 1s²2s²2p⁶3s²3p⁶3d⁵4s¹ and the electron configuration of the third element which is Zn²⁺ is 1s²2s²2p⁶3s²3p⁶3d¹⁰.

Only F canNOT exceed the octet rule.

To know more about octet rule :

brainly.com/question/33717924

#SPJ11

The recommended baghouse type that can be used to retrofit a plant limited in space and needs to achieve a particle control efficiency of 95% is a pulse jet baghouse.

In order to recommend a baghouse type to retrofit a plant that is limited in space and needs to achieve particle control efficiency of 95%, let us first look at the baghouse options available and their efficiency. A baghouse is an air pollution control device that uses fabric filter tubes to remove particulate matter from the air and gases. There are three types of baghouses that can be used: Shaker Baghouse, Reverse Air Baghouse and Pulse Jet Baghouse.

Shaker baghouses are generally smaller than other baghouse designs and have low initial capital costs. The downside of this type of baghouse is that it has the lowest efficiency compared to reverse air and pulse jet baghouses. This means that it may not be able to achieve the required 95% particle control efficiency.

Reverse Air Baghouse is more efficient than the shaker baghouse. The reverse air baghouse features a cleaning system that uses an adjustable fan to pull air through the baghouse, effectively dislodging the collected dust particles. The collected particles are then discharged to a hopper for storage or disposal. This baghouse type can achieve a particle control efficiency of up to 99%.

However, in our case, it is recommended to use a Pulse Jet Baghouse. This type of baghouse is the most efficient and provides the highest level of particle control efficiency of up to 99.9%. Pulse jet baghouses use high-pressure compressed air to pulse the bags, causing the dust to fall into the hopper below. Pulse jet baghouses have lower operating costs than other types of baghouses due to their smaller size, less frequent cleaning cycles, and use of less compressed air.

Therefore, considering the limitation of space and the required particle control efficiency of 95%, pulse jet baghouse is the best recommendation.

Conclusion: The recommended baghouse type that can be used to retrofit a plant limited in space and needs to achieve a particle control efficiency of 95% is a pulse jet baghouse.

To know more about efficiency visit

https://brainly.com/question/31458903

#SPJ11

The measure of the angle z of triangle ∆ABD in the same segment with angle C of triangle ∆ABC is equal to 51°

When two angles are in the same segment, they have the same measure. This means that if you know the measure of one angle in a particular segment, you can determine the measure of any other angle in that segment.

angle z = angle C

angle C = 180° - (55 + 34 + 40)° {sum of interior angles of triangle ABC

angle C = 180° - 129°

angle C = 51°

also;

angle z = 51°

Therefore, the measure of the angle z of triangle ∆ABD in the same segment with angle C of triangle ∆ABC is equal to 51°

Read more about angle here:https://brainly.com/question/24423151

#SPJ1

Calculating this expression will give you the Annual Percentage Yield. The calculation, the APY in this situation is approximately 3.357%.

To find the Annual Percentage Yield (APY) when given the Annual Percentage Rate (APR) compounded monthly, we can use the following formula:

[tex]APY = (1 + (APR / n))^{n - 1[/tex]

Where:

APY is the Annual Percentage Yield

APR is the Annual Percentage Rate

n is the number of compounding periods per year

In this case, the APR is 3.3% and it is compounded monthly,

so n = 12 (since there are 12 months in a year).

Substituting the values into the formula:

[tex]APY = (1 + (0.033 / 12))^{12} - 1[/tex]

Calculating this expression will give you the Annual Percentage Yield.

By performing the calculation, the APY in this situation is approximately 3.357%.

To know more about  Annual Percentage Yield visit:

https://brainly.com/question/30774234

#SPJ11

A bank offers an APR of 3.3% compounded monthly. The annual percentage yield is  3.46%.

The annual percentage yield (APY) represents the total amount you will earn on your investment, taking into account compounding. To find the APY when the bank offers an APR of 3.3% compounded monthly, we need to use the following formula:

APY = (1 + (APR / n))^n - 1

where APR is the annual percentage rate and n is the number of compounding periods in a year. In this case, the APR is 3.3% and it is compounded monthly, so n = 12 (since there are 12 months in a year).

Plugging the values into the formula:

APY = (1 + (0.033 / 12))^12 - 1

Calculating the values within the parentheses first:

APY = (1 + 0.00275)^12 - 1

Evaluating the exponential term:

APY = (1.00275)^12 - 1

Calculating the result:

APY = 1.0346 - 1

APY = 0.0346

Therefore, the annual percentage yield (APY) in this situation is 3.46%.

In summary, the APY when a bank offers an APR of 3.3% compounded monthly is 3.46%.

Learn more about percentage

https://brainly.com/question/32197511

#SPJ11