What are some of the steps of object oriented process?

Disabling interrupts is not appropriate for implementing synchronization primitives in a single-processor system if they are to be used in user-level programs because it can lead to poor system performance and potential deadlock situations.

When interrupts are disabled, the processor cannot respond to hardware events or other interrupts until the synchronization operation is complete, which can result in delays and decreased system responsiveness. This can be particularly problematic in user-level programs, which are typically more interactive and require faster response times than system-level programs.

In addition to performance issues, disabling interrupts can also create potential deadlock situations where two or more processes are waiting for each other to release a shared resource. Since interrupts are disabled, there is no way for the system to preempt a process that is holding a resource indefinitely, leading to a situation where all processes are blocked and the system becomes unresponsive.

To avoid these issues, synchronization primitives in user-level programs should use other mechanisms such as semaphores, mutexes, or monitors, which are designed to provide synchronization without requiring the disabling of interrupts. These mechanisms allow multiple processes to access shared resources while avoiding conflicts and ensuring that all processes can proceed as needed. Overall, the use of appropriate synchronization primitives is critical for ensuring proper system performance and avoiding potential issues in single-processor systems.

To learn more about Synchronization, visit:

https://brainly.com/question/30028801

#SPJ11

a. For a CPU with a 16-bit address bus, the total amount of memory that can be addressed is 64 kilobits.

The size of the address bus determines the maximum amount of memory that a CPU can address. With a 16-bit address bus, the CPU can address up to 2^16 (or 64 kilo) memory locations, each of which can hold one bit.

b. For a CPU with a 32-bit address bus, the total amount of memory that can be addressed is 4 gigabytes (or 4,096 megabytes).

With a 32-bit address bus, the CPU can address up to 2^32 memory locations, each of which can hold one byte (8 bits). Therefore, the total amount of memory that can be addressed is 2^32 bytes, which is equal to 4 gigabytes (or 4,096 megabytes).

For more questions like  CPU click the link below:

https://brainly.com/question/31822602

#SPJ11

The Java program that speaks to the above prompt is attached accordingly.

Note that the Java code that can tell you whether a statement is a pangram or a perfect pangram.

Input

Each input line is a sentence that concludes with a period. Other punctuation may be used as well. The input is terminated by a single period.

Output

The software  prints the key word for each phrase. PERFECT if the statement is a perfect pangram, PANGRAM if it is not, and NEITHER if it is neither. The software must additionally print a colon, a space, and the original phrase after the key word.

Learn more about java;
https://brainly.com/question/29897053
#SPJ1

To define a function called regression_parameters that returns the parameters of the regression line for mRNA Expression (Affy) vs. mRNA Expression (RNAseq), we can use the Python library statsmodels to perform linear regression analysis.

The first step is to import the necessary library and data. We can use Pandas to read the data from a CSV file and create two arrays, one for the x values (mRNA Expression (RNAseq)) and one for the y values (mRNA Expression (Affy)).

Once the data is loaded, we can use statsmodels to fit a linear regression model to the data and extract the slope and intercept of the regression line. The regression line represents the equation y = mx + b, where m is the slope and b is the intercept.

To define the function, we can use the following code:

import pandas as pd
import statsmodels.api as sm

def regression_parameters(x_values, y_values):

   # Create a Pandas DataFrame with the x and y values
   df = pd.DataFrame({'x': x_values, 'y': y_values})

   # Add a constant column to the DataFrame to represent the intercept    df = sm.add_constant(df)
   # Fit a linear regression model to the data
   model = sm.OLS(df['y'], df[['const', 'x']]).fit()

   # Extract the slope and intercept from the model
   slope = model.params['x']
   intercept = model.params['const']

   # Return the parameters as a two-item array
   return [slope, intercept]

The function takes in two arguments, an array of x values and an array of y values. It first creates a Pandas DataFrame with the x and y values and adds a constant column to represent the intercept. It then fits a linear regression model to the data using the OLS (ordinary least squares) method and extracts the slope and intercept from the model. Finally, it returns the parameters as a two-item array containing the slope and intercept, respectively.

To learn more about Python programming, visit:

https://brainly.com/question/26497128

#SPJ11

The step that ensures clarity on the overall design problem that needs to be solved in the basic roadmap of Attribute-Driven Design (ADD) is to "review inputs."

This step involves reviewing the inputs from the stakeholders, such as requirements, constraints, and quality attributes, to gain a clear understanding of the problem that needs to be solved. By reviewing the inputs, the design team can ensure that they have a complete and accurate understanding of the problem before moving forward with the design process.

For more such question on attributes

https://brainly.com/question/17290596

#SPJ11

Insertion sort is a simple and intuitive sorting algorithm that works by building a sorted sequence one element at a time. It is an in-place comparison-based algorithm that sorts an array by shifting elements one at a time to their correct position.

For such more question on algorithm

https://brainly.com/question/29927475

#SPJ11

The kineticenergy function takes the mass and velocity of an object as arguments, calculates the kinetic energy using the formula given in the question, and returns the value of ke. This function can be used to calculate the kinetic energy of any moving object, making it a useful tool for physics calculations.

To write the function that accepts the mass and velocity of an object as arguments and then uses the above formula to calculate the kinetic energy of the object. The function will then return the value of the kinetic energy.

Here is an example of what the function might look like:


#include
using namespace std;

double kineticenergy(double mass, double velocity) {
   double ke = 0.5 * mass * velocity * velocity;
   return ke;
}

int main() {
   double mass, velocity;
   cout << "Enter the mass of the object in kilograms: ";
   cin >> mass;
   cout << "Enter the velocity of the object in meters per second: ";
   cin >> velocity;

   double ke = kineticenergy(mass, velocity);
   cout << "The kinetic energy of the object is " << ke << " Joules." << endl;

   return 0;
}

In the above program, we first declare the function named kineticenergy that takes two arguments - mass and velocity. The function uses the formula given in the question to calculate the kinetic energy and returns the value of ke.

In the main function, we ask the user to enter the mass and velocity of the object. We then call the kineticenergy function and pass it the values entered by the user. The function returns the calculated kinetic energy, which we store in the variable ke. Finally, we display the value of ke to the user.

To know more about kinetic energy visit:

https://brainly.com/question/14993089

#SPJ11

If you are experiencing an error during iMessage activation, it is likely that there is an issue with your device or account settings. One common reason for this error is that your device is not connected to the internet. Make sure that your Wi-Fi or cellular data connection is strong and stable.

Another possible cause is that there may be an issue with your Apple ID. Make sure that you are signed in to your Apple ID and that your account information is up-to-date. You may also need to check that your device is running the latest version of iOS or macOS.

If these steps do not resolve the issue, you may need to contact Apple Support for further assistance. They can help diagnose the problem and provide guidance on how to fix it. It's important to resolve the issue as soon as possible to ensure that you can use iMessage and other Apple services without interruption.

You can learn more about iMessage activation at: brainly.com/question/30295747

#SPJ11

Answer:

Python

num_students = int(input("How many students do you have? "))

num_test_scores = int(input("How many test scores per student? "))

# Initialize an accumulator for test scores.

total = 0.0

# Get a student's test scores.

for student in range(num_students):

# Print the student's name.

print("Student", student + 1)

# Get the student's test scores.

for test_num in range(num_test_scores):

score = float(input("Test number", test_num + 1, end=''): '))

# Add the score to the accumulator.

total += score

# Calculate the average test score.

average = total / num_students

# Display the average.

print("The average test score is", average)

This code will ask the user for the number of students and the number of test scores per student. It will then initialize an accumulator for test scores and get a student's test scores. The code will then calculate the average test score and display it.

Explanation:

Code calculating the average test score

Python

num_students = int(input("How many students do you have? "))

num_test_scores = int(input("How many test scores per student? "))

# Initialize an accumulator for test scores.

total = 0.0

# Get a student's test scores.

for student in range(num_students):

# Print the student's name.

print("Student", student + 1)

# Get the student's test scores.

for test_num in range(num_test_scores):

score = float(input("Test number", test_num + 1, end=''): '))

# Add the score to the accumulator.

total += score

# Calculate the average test score.

average = total / num_students

# Display the average.

print("The average test score is", average)

This code will ask the user for the number of students and the number of test scores per student. It will then initialize an accumulator for test scores and get a student's test scores. The code will then calculate the average test score and display it.

This is only one of the advantages Python has over other programming languages like C, C++, or Java. Additionally, Python uses comparatively less lines of code than other programming languages with bigger code blocks to accomplish the same operations and tasks.

Learn more about Python here:

brainly.com/question/30427047

#SPJ2

Since Ben is determined to win the next race he enters. Ben using  option B. Motivation.

Motivation is a psychological state that drives us to take action towards achieving our goals. It involves being aware of our own desires and goals and using that awareness to take action.

Ben is using motivation as a form of self-awareness. By imagining himself crossing the finish line, he is creating a mental picture of success which motivates him to put in more effort while training.

This motivation is a form of self-awareness because it involves being aware of his own goals and desires, and using that awareness to take action towards achieving them. In this case, Ben is using his mental picture of success to motivate himself towards winning the next race he enters.

Learn more about awareness from

https://brainly.com/question/28039248

#SPJ1

A logon script is a set of commands stored in a file that are executed when a user logs on to a Windows domain.

Logon scripts are used by system administrators to automate tasks, such as mapping network drives, connecting to printers, or setting environment variables, for users when they log on to a Windows domain. These scripts are usually written in a scripting language like PowerShell, VBScript, or Batch and are executed automatically by the system when the user logs on.

In summary, a logon script is a helpful tool for system administrators to streamline user settings and configurations when they access a Windows domain, making the user experience more efficient and consistent.

To know more about network drives visit:

https://brainly.com/question/13361466

#SPJ11

To determine the CIDR notation for the starting address of LA, we need to find out the subnet mask for the LA location based on the number of hosts. The largest number of hosts for LA is 8000, which falls between 2^12 and 2^13. Therefore, we need at least 13 bits to represent the number of hosts for LA. So the CIDR notation for the starting address of LA is 192.100.0.0/21.

Starting with the IP address 192.100.0.0, we can determine the subnet mask by counting the number of bits needed to represent the number of hosts for LA. We can represent 13 bits using the first three octets and the first bit of the fourth octet, which gives us a subnet mask of 255.255.248.0 in binary notation (11111111.11111111.11111000.00000000). To represent the starting address of LA in CIDR notation, we need to count the number of leading ones in the subnet mask, which is 21. Therefore, the CIDR notation for the starting address of LA is 192.100.0.0/21.

Learn more about CIDR; https://brainly.com/question/28150748

#SPJ11

Mr. and Mrs. Jones plan on retiring with 70% of their pre-retirement earnings, which means their retirement income will be $32,900.

To calculate their retirement income, we can use the following formula: Retirement income = Pre-retirement earnings x Retirement percentage. In this case, the pre-retirement earnings are $47,000, and the retirement percentage is 70% or 0.7 as a decimal.

Using the formula, we can calculate Jones' retirement income as, Retirement income = $47,000 x 0.7 = $32,900. Therefore, Mr. and Mrs. Jones plan on having a retirement income of $32,900 based on their pre-retirement earnings and their chosen retirement percentage.

It is worth noting that the amount of retirement income needed can vary depending on individual circumstances such as lifestyle, location, and healthcare costs. While using a percentage of pre-retirement earnings as a retirement income target can be a useful starting point, it is important to consider individual factors and adjust the retirement income target accordingly. Additionally, it is important to plan and start saving for retirement early to ensure a comfortable and financially secure retirement.

To learn more about pre-retirement earnings, visit:

https://brainly.com/question/1408876

#SPJ11

To create a program that calculates the time required to cut the grass in a rectangular yard, we need to follow a few simple steps. First, we need to prompt the user to input the length and width of the yard and the house situated in the yard.

Once we have the dimensions of the yard and house, we can calculate the area of the yard by multiplying the length and width. We then subtract the area of the house from the total yard area to get the area that needs to be cut.

Next, we can calculate the time required to cut the grass by dividing the area that needs to be cut by the rate of two square meters per minute.

We can then display the time required to cut the grass to the user using the console. The code for this program would involve using input statements to get the necessary dimensions, performing the calculations, and printing the result to the console using print statements. With this program, users can quickly and easily determine how long it will take to cut their grass.

You can learn more about the program at: brainly.com/question/14368396

#SPJ11

To ensure proper testing of electronic components, follow these instructions using criteria liketi visual inspecon, electrical testing, and performance evaluation.

Now, let's dive into the step-by-step process:

1. Visual Inspection: Start by examining the components for any physical damage, deformations, or signs of overheating. Check the integrity of solder connections and verify that all parts are securely mounted on the PCB.

2. Electrical Testing: Utilize multimeters and oscilloscopes to measure parameters like resistance, capacitance, and inductance. Confirm that the components meet their specified values within acceptable tolerances.

3. Functional Test: Set up the test environment by connecting the electronic components to the power supply, input/output devices, and any necessary test equipment. Run the components through their intended functions to verify proper operation.

4. Performance Evaluation: Compare the actual performance of the components against their specifications. This may include evaluating signal quality, power consumption, or response time.

5. Record Keeping: Document the results of each test, noting any deviations from specifications or identified defects. Include details on the component's make, model, and serial number, as well as the date and time of the test.

6. Review and Analysis: Analyze the test results to identify trends or potential issues. Use this information to improve the testing process or make necessary adjustments to the electronic components.

7. Communicate Results: Share the test findings with relevant stakeholders, such as quality assurance teams or product developers. Address any issues found and implement corrective actions as needed.

By following these steps, you will ensure that electronic components are tested thoroughly and meet the required quality standards.

Know more about the power consumption click here:

https://brainly.com/question/30122759

#SPJ11

Answer:

The number of dependents an employee will claim.

Yes, continuity errors are common in movies because it's challenging to catch every mistake before the film's release. While efforts are made to minimize them, some errors inevitably slip through.

Continuity errors occur when there is a lack of consistency in elements such as props, costumes, or settings within a movie. These inconsistencies can result from various factors, including human oversight, budget constraints, or time limitations during filming. Directors, editors, and script supervisors work together to maintain continuity throughout the production process, but even with their best efforts, some errors may still go unnoticed.

Several factors contribute to the prevalence of continuity errors:

1. Multiple takes: Actors perform scenes several times, which may cause slight variations in their positions or actions. Combining different takes in the editing process can lead to discrepancies.

2. Filming out of sequence: Movies are rarely shot in chronological order. Scenes may be filmed weeks or months apart, making it difficult to maintain perfect continuity.

3. Changes in script or set design: Alterations to the script or set during production can introduce inconsistencies if not carefully managed.

4. Human error: Despite having dedicated professionals working on set, mistakes can still happen.

5. Time and budget constraints: Limited resources may prevent filmmakers from reshooting a scene to fix a continuity error.

Ultimately, while filmmakers strive to achieve seamless continuity, it's nearly impossible to catch every single mistake before a movie's release. However, many viewers enjoy spotting these errors, and they rarely detract from the overall film experience.

Know more about the production process click here:

https://brainly.com/question/28313605

#SPJ11

The value of variable z can be calculated by first evaluating the expression y.length - 2 * x.length, which involves subtracting twice the length of x from the length of y.

The length of x is 5, and the length of y is 6.

So y.length - 2 * x.length evaluates to 6 - 2 * 5, which is -4.

Then, the expression (3) is simply the number 3.

Adding these two values together gives:

z = -4 + 3 = -1

Therefore, the value of variable z is -1.

The frequency of the analog signal in illustration A is 7 Hz

The frequency of a repeated event is the number of occurrences per unit of time. It is separate from angular frequency and is sometimes referred to as temporal frequency. The unit of frequency is hertz, which equals one occurrence every second.

Frequency is a measurement of how frequently a recurrent event, such as a wave, happens in a certain period of time. A cycle is one completion of the repeating pattern. Only moving waves that change position with respect to time have frequency.

Learn more about frequency  at:

https://brainly.com/question/5102661

#SPJ1

Emmitt should choose the store credit option to pay for the television.

Since Emmitt can afford to pay $100 each month, he will be able to pay off the balance of $539 within the first six months (5.39 months to be precise) using the store credit option. As the store offers six months of no interest, Emmitt won't have to pay any interest if he manages to pay off the balance within that time.

On the other hand, if he uses his credit card or obtains a personal loan, he would likely have to pay interest on the borrowed amount. Given that he can pay off the balance within the interest-free period offered by the store, choosing the store credit would be the most cost-effective option.

Emmitt should opt for the store credit to purchase the television, as it will allow him to pay off the balance within the interest-free period, making it the most cost-effective option.

To know more about store credit visit:

https://brainly.com/question/31325315

#SPJ11

The number of executed assignment statements for `feetot` during a call to `calcebayfee()` depends on the method's implementation and control structures used. There will always be at least one assignment statement, but additional assignments may occur based on the specific conditions within the method.

When a call is made to the `calcebayfee()` method, the number of assignment statements executed for the variable `feetot` depends on the method's implementation. Typically, there will be at least one assignment statement for initializing the `feetot` variable. If the method uses conditional statements, loops, or other control structures, additional assignment statements may execute based on specific conditions being met.

For example, if the method calculates fees based on different categories or price ranges, `feetot` could be assigned multiple times using conditional statements (if-else or switch-case). However, only one of these assignments will execute per call to the method, as the conditions are mutually exclusive.

You can learn more about control structures at: brainly.com/question/15008951

#SPJ11

Answer:

The time it takes to crack all passwords in all files depends on a number of factors, including the following:

* The complexity of the passwords: The more complex the passwords, the longer it will take to crack them.

* The number of passwords: The more passwords there are, the longer it will take to crack them all.

* The power of the computer being used to crack the passwords: The more powerful the computer, the faster it will be able to crack the passwords.

It is generally tough to crack passwords in all files. However, it is possible to decrypt some passwords, especially if they are simple or ordinary. For example, a simple password like "password" can be cracked in seconds.

Here are some tips for creating strong passwords that are difficult to crack:

* Use a mix of uppercase and lowercase letters, numbers, and symbols.

* Avoid using common words or phrases.

* Make your passwords at least 12 characters long.

* Change your passwords regularly.

Following these tips can make it much more difficult for someone to crack your passwords and access your files.

In this output script, there are several errors encountered during the execution of the program. Here's a summary of the errors:

1. Error #: 0, Problem: Invalid integer - Occurred when the input "abc" was given as an integer value.
2. Error #: 1, Problem: Value too high - Occurred when the input "123" was considered too high for the container.
3. Error #: -1, Problem: Value too low - Occurred when the input "-123" was considered too low for the container.

Additionally, there were several invalid date values entered:

1. "abc" - Invalid date value.
2. "12" - Err#2: Invalid month in date.
3. "121212" - Err#1: Invalid year in date.
4. "221312" - Err#2: Invalid month in a date.
5. "220229" - Err#3: Invalid day in date.

The output script demonstrates that the program tests various input values and reports any errors found. No memory leaks were detected, and no errors were found in the memory management at the end of the script.

#SPJ11

Output Script : https://brainly.com/question/31883399

In the context of programming resources, FAQs are lists of frequently asked questions and their answers. Good reference materials for programming are from authoritative sources, such as official documentation or established publications. Online help forums have valuable input and advice from forum participants, who often have diverse experiences and expertise.

User and developer forums provide step-by-step instructions Tutorials provide guided lessons Blogs are useful when they are written by industry professionals.

User manuals provide step-by-step instructions to explain features and commands, making them an essential resource for learning new software or tools. User and developer forums provide community-based support, where members can discuss, troubleshoot, and share their knowledge. Tutorials provide guided lessons and hands-on practice to help users build skills in a specific programming topic or technique.

Blogs are useful when they are written by industry professionals or experts, as they can offer unique insights, opinions, and updates on various aspects of programming. In summary, a combination of FAQs, authoritative sources, online forums, user manuals, tutorials, and expert-written blogs can be invaluable for programmers seeking to expand their knowledge and skills in the ever-evolving world of programming.

You can learn more about programming at: brainly.com/question/14368396

#SPJ11

Assuming that Marsha has not made any changes to the default settings, the other folder that should be visible to her by default in the One Drive node of File Explorer is the "Pictures" folder.

When a user signs in to a new Windows 10 device with their Microsoft account, One Drive is automatically set up and configured to sync files and folders between the device and their One Drive cloud storage. By default, the Documents and Pictures folders are set to sync with One Drive, so both folders should be visible in the One Drive node of File Explorer.

For more such question on configured

https://brainly.com/question/29663540

#SPJ11

The purpose of drawing probability trees and reverse trees is to analyze various scenarios related to the accuracy of the probability calculation and the likelihood of certain outcomes given specific circumstances represented by P(D|M).

The given prompt requires solving a series of tasks related to probability trees and reverse trees.

To begin with, a probability tree must be drawn to represent the situation described by P(D|M).

From there, a reverse tree must be drawn to represent the inverse probability of P(M|D).

Once these trees are drawn, various scenarios can be discussed, including false positives, true positives, false negatives, and true negatives, for both the main tree and the reverse tree.

These scenarios relate to the accuracy of the probability calculation and the likelihood of certain outcomes given specific circumstances.

Overall, this exercise helps to illustrate the importance of understanding probability and how it can be represented and analyzed using probability trees and reverse trees.

Learn more about probability trees

brainly.com/question/2958970

#SPJ11

In this system, the binary representation of the word "dog" would be:
- d: 00000100
- o: 00001111
- g: 00000111

ASCII is a character encoding standard that assigns each character a unique numerical value. In this system, we are using the ASCII values for each character to determine the corresponding 8-bit sequence.

For example, the ASCII value for "d" is 100 in decimal or 0x64 in hexadecimal. To convert this to an 8-bit sequence, we can use binary conversion and add leading zeros as necessary. So 100 in binary is 00000100.

Similarly, the ASCII value for "o" is 111 in decimal or 0x6F in hexadecimal. Converting this to an 8-bit sequence gives us 00001111.

Finally, the ASCII value for "g" is 103 in decimal or 0x67 in hexadecimal. The corresponding 8-bit sequence is 00000111.

Overall, this system allows us to represent text using binary sequences that are easy to store and manipulate. Each character is given a unique 8-bit sequence, allowing for efficient encoding and decoding of strings.

You can learn more about binary representation at: brainly.com/question/29577578

#SPJ11

The two main factors that determine the choice of a network model are the specific needs of the organization and the cost of implementation. These factors influence the selection of an appropriate network architecture to achieve the desired functionality and efficiency.

Explanation:

In the first step, an organization must identify its specific needs. This includes understanding the purpose of the network, the number of users, the type and volume of data being transmitted, and any security or reliability requirements. The needs of the organization will determine which network model best suits its operations, whether it's a centralized, decentralized, or distributed network.

Next, the cost of implementation should be considered. This includes not only the initial setup costs but also the ongoing maintenance, upgrades, and potential expansion of the network. Organizations must weigh the benefits of a particular network model against its costs to ensure that the chosen model provides the best value for their investment.

Furthermore, the scalability of the network model is essential. As the organization grows, its network should be able to expand and accommodate the increasing number of users and data without significant disruptions to existing operations.

Lastly, organizations should also consider the ease of use, management, and integration of the network model with their existing systems and infrastructure. The chosen model should be user-friendly, easy to manage, and compatible with the organization's current technology and software.

In conclusion, the choice of a network model depends on the organization's specific needs and the cost of implementation. By considering these factors, organizations can select the most suitable network model to support their operations and achieve their desired level of functionality and efficiency.

Know more about the distributed network click here:

https://brainly.com/question/27795190

#SPJ11

Reading:

1. Keeping up with industry news and trends: To be successful in your industry, you need to stay up-to-date with the latest news and trends. Reading industry publications, blogs, and newsletters can help you keep informed about the latest developments.

2. Researching companies and people: Before attending a networking event or meeting, it's helpful to research the companies and people you will be interacting with. This can help you ask more informed questions and tailor your conversation to their interests.

Writing:

1. Crafting effective emails: Email is a common mode of communication in professional networking, and being able to write clear, concise, and professional emails is essential. Whether you're reaching out to schedule a meeting or following up on a previous conversation, a well-written email can help you make a positive impression.

2. Creating a strong online presence: In today's digital age, having a strong online presence is important for professional networking. This can include creating a professional website or LinkedIn profile, writing blog posts or articles, or contributing to online forums. Strong writing skills can help you create engaging and informative content that will attract the attention of potential employers or clients.

Speaking:

1. Communicating clearly and confidently: Being able to communicate your ideas clearly and confidently is essential for networking success. Whether you're giving a presentation or engaging in a one-on-one conversation, speaking effectively can help you make a strong impression and convey your expertise.

2. Building relationships: Networking is all about building relationships, and good communication skills are essential for establishing rapport and building trust. By speaking confidently and engaging in active listening, you can create meaningful connections with others in your industry.

The most common physical topology according to the "Physical vs. Logical Topologies" video case is the star topology.

In the star topology, devices in a network are connected to a central hub or switch. Each device has a dedicated connection to the central hub, forming a "star" pattern. This topology is commonly used in both small and large networks due to its simplicity, scalability, and ease of troubleshooting. It allows for easy addition or removal of devices without disrupting the entire network. Additionally, in a star topology, the failure of one device does not affect the functioning of other devices in the network.

You can learn more about star topology at

https://brainly.com/question/28942297

#SPJ11