What are the answer

The charge of electrons is determined by their spin, which is either up or down and the same spin will repel each other due to their negative charge, while electrons with opposite spins will attract each other.

Electrons are negatively charged particles and exist in pairs because of the Pauli Exclusion Principle, which states that no two electrons in an atom can have the same set of quantum numbers. This means that if two electrons are in the same atom, they must have different energy levels, angular momenta, and magnetic moments. This prevents the electrons from occupying the same space and prevents them from having the same charge. As a result, electrons remain in pairs, even though they have the same charge.

To learn more about electrons click here https://brainly.com/question/28977387

#SPJ1

The chemical formula for C2H6 tells us that there are two carbon atoms in each molecule of ethane. Therefore, to find the number of moles of carbon atoms in 0.388 moles of C2H6, we can use the following steps:

1. Determine the total number of moles of carbon atoms in 0.388 moles of C2H6 by multiplying the number of moles of C2H6 by the number of carbon atoms per molecule:

0.388 moles C2H6 x 2 moles C / 1 mole C2H6 = 0.776 moles C

2. Round the result to the appropriate number of significant figures, if necessary.

Therefore, there are 0.776 moles of carbon atoms in 0.388 moles of C2H

The amount of energy evolved/absorbed when 444 grams of NBr₃ is produced is 38.5 KJ

First, we shall determine the number of mole in 444 grams of NBr₃. Details below:

Mole = mass / molar mass

Mole of NBr₃ = 444 / 253.719

Mole of NBr₃ = 1.75 mole

Finally, we shall determine the energy evolved/absorbed. Details below:

N₂ + 3Br₂ -> 2NBr₃ + 44 KJ

From the balanced equation above,

When 2 moles of NBr₃ were produced, 44 KJ of heat energy were absorbed.

Therefore,

When 1.75 moles of NBr₃ is produced, = (1.75 × 44) / 2 = 38.5 KJ of heat is absorbed.

Thus, the heat energy absorbed is 38.5 KJ

Learn more about heat energy absorbed:

https://brainly.com/question/29224546

#SPJ1

The density of the gas would be 9.01 g/L.

To calculate the density (in g/L) of a gas, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

To solve for n/V (the number of moles of gas per unit volume), we can rearrange the ideal gas law:

n/V = P/RT

The density (in g/L) is then equal to the molar mass (in g/mol) times n/V:

density = (molar mass) * (n/V)

The molar mass of C₂H₂Cl₂ is:

2(12.01 g/mol) + 2(1.01 g/mol) + 2(35.45 g/mol) = 96.93 g/mol

To use the ideal gas law, we need to convert the temperature to Kelvin:

70.0C + 273.15 = 343.15 K

Plugging in the values:

P = 2.50 atm

V = unknown (we are not given the volume)

n/V = P/RT = 2.50 atm / (0.08206 Latm/(molK) * 343.15 K) = 0.0930 mol/L

molar mass = 96.93 g/mol

Therefore, the density of the C₂H₂Cl₂ gas at 70.0C and 2.50 atm of pressure is:

density = (molar mass) * (n/V) = 96.93 g/mol * 0.0930 mol/L = 9.01 g/L.

Learn more about density here:

https://brainly.com/question/15164682

#SPJ1

In Experiment 1, we found the heat of solution of sodium hydroxide (NaOH) by dissolving 2.00 g of NaOH in 50.0 mL of water.

The temperature rose from 20°C to 28.5°C. The moles of NaOH were determined to be 0.0518 mol.

Using the specific heat of water (4.184 J/g°C), we calculated the enthalpy change (ΔH_sol) and compared it to the literature value, finding a percent error.

In Experiment 2, we measured the heat of neutralization between NaOH and 0.75 M HCl.

The temperature increased from 23.5°C to 27°C. We determined the moles of HCl, limiting reagent, and enthalpy change (ΔH_neut) for the neutralization reaction.

The actual value was compared to the literature value, and percent error was calculated.

Experimental errors in both experiments could arise from heat loss/gain, variations in room temperature and atmospheric pressure, and imprecise measurements.

The enthalpy changes in both experiments are due to bond breaking and forming during the dissociation of NaOH and the neutralization reaction between NaOH and HCl.

In conclusion, we determined the heat of solution for sodium hydroxide and the heat of neutralization between sodium hydroxide and hydrochloric acid, and analyzed the possible sources of experimental errors.

Read more about enthalpy here:

https://brainly.com/question/16985375

#SPJ1

The correct answer is To answer this question, we need to use the balanced chemical equation for the decomposition of lead(II) oxide (PbO).

[tex]PbO(s) → Pb(s) + O2(g)[/tex]From this equation, we can see that for every 1 mole of PbO that decomposes, 1 mole of O2 is produced. Therefore, we can use the given number of moles of PbO to determine the number of moles of O2 produced, and then convert to grams using the molar mass of O2 We are given 4.6 moles of PbO, so we can calculate the moles of O2 produced as follows: moles of O2 = moles of PbO moles of O2 = 4.6 moles Now, we can use the molar mass of O2 to convert from moles to grams: mass of O2 = moles of O2 x molar mass of O2 mass of O2 = 4.6 moles x 32.00 g/mol mass of O2 = 147.2 g Therefore, when 4.6 moles of PbO decompose, 147.2 grams of O2 are produced. It's important to note that the given reaction assumes that the lead(II) oxide decomposes completely, meaning that all of the PbO is converted to Pb and O2. In reality, some of the PbO may not decompose completely, and other side reactions may occur. However, assuming complete decomposition, the calculated mass of O2 represents the theoretical yield of the reaction.

To learn more about decomposition click on the link below:

brainly.com/question/8009068

#SPJ1

Answer:

The first step is to determine the moles of formic acid and NaOH that react. moles of formic acid = (0.25 mol/L) x (0.055 L) = 0.01375 mol moles of NaOH = (0.12 mol/L) x (0.075 L) = 0.009 mol Since NaOH is a strong base, it will react completely with formic acid to form sodium formate and water: HCOOH + NaOH → HCOONa + H2O The limiting reagent in this case is NaOH, so all of it will be consumed in the reaction. The amount of excess formic acid that remains can be calculated: moles of HCOOH remaining = moles of HCOOH initial - moles of NaOH used moles of HCOOH

Since it has a large concentration of hydrogen ions (H+) and a low concentration of hydroxide ions, an acid with a pH of 1 would be categorised as a strong acid. (OH-).

At the kinds of amounts you typically use in the lab, strong acids like hydrochloric acid have a pH between 0 and 1. At a quantity of 38%, hydrochloric acid (HCL) has a pH value of 1.1.

Muriatic acid is another name for hydrochloric acid. It has an unpleasant scent and is colorless. As an acidifying substance, it is employed. Since it is a powerful acid, its pH will be lower than 7. There is a pH spectrum of 1.5 to 3.5.

To know more about hydrogen ions visit:-

https://brainly.com/question/7641960

#SPJ1

The reaction requires a stoichiometric ratio of [tex]2:4[/tex] for carbon monoxide to hydrogen gas, resulting in the formation of methane and oxygen gas as products.

The balanced chemical equation for the reaction between gaseous carbon monoxide  [tex](CO)[/tex] and hydrogen gas [tex](H_2)[/tex] to form gaseous methane [tex](CH_4)[/tex] and oxygen gas  [tex](O_2)[/tex]  is:

[tex]2CO(g) + 4H2(g) \rightarrow CH4(g) + O2(g)[/tex]

In this equation, [tex]2[/tex]  moles of carbon monoxide react with  [tex]4[/tex] moles of hydrogen gas to produce 1 mole of methane and  [tex]1[/tex] mole of oxygen gas.

Therefore, The reaction requires a stoichiometric ratio of [tex]2:4[/tex] for carbon monoxide to hydrogen gas, resulting in the formation of methane and oxygen gas as products.

Learn more about equation here:

https://brainly.com/question/30087623

#SPJ1

Answer:

i am adding solution with attachment

Explanation:

Answer: might be lack of taste, education, and good manners

Explanation:

Ionic and Covalent Bonds- The materials utilized during the experiment, the steps taken, and the techniques used to analyze the results should all be described in the section titled "Materials and Methods."

A lab report is broken down into eight sections: title, abstract, introduction, techniques and materials, results, discussion, conclusion, and references. The title of the lab document must be descriptive of the scan and replicate what the scan analyzed.

Ionic bonds require an electron donor, the metal, and an electron accepter, the non-metal. Covalent bonding is the sharing of electrons between atoms. This kind of bonding happens between two of the equal element or elements shut to each other in the periodic table.

To learn more about Covalent Bonds here:

brainly.com/question/19382448

#SPJ9

a) The balanced chemical equation is: 2Al + 3ZnCl₂ → 2AlCl₃ + 3Zn. To determine the number of moles of ZnCl₂ required, we need to first calculate the number of moles of Al using its molar mass:

molar mass of Al = 26.98 g/mol

moles of Al = 17.8 g / 26.98 g/mol = 0.660 mol

According to the balanced equation, 2 moles of Al react with 3 moles of ZnCl₂. Therefore, we can use a proportion to find the number of moles of ZnCl₂:

0.660 mol Al / 2 mol Al = x mol ZnCl₂ / 3 mol ZnCl₂

x mol ZnCl₂ = (0.660 mol Al × 3 mol ZnCl₂) / 2 mol Al = 0.990 mol ZnCl₂

Therefore, 0.990 moles of ZnCl₂ are required.

b) From the balanced equation, we see that 2 moles of Al produce 2 moles of AlCl₃ and 3 moles of Zn. We can use the molar masses of the products to calculate the amount of each product produced:

molar mass of AlCl₃ = 133.34 g/mol

moles of AlCl₃ produced = 2 mol Al × (133.34 g/mol) / (26.98 g/mol) = 9.88 mol AlCl₃

molar mass of Zn = 65.38 g/mol

moles of Zn produced = 3 mol Zn × (65.38 g/mol) / (1 mol Zn) = 196.14 g Zn / 65.38 g/mol = 3.00 mol Zn

Therefore, 9.88 moles of AlCl₃ and 3.00 moles of Zn are produced.

c) The balanced chemical equation is: Fe₂O₃ + 3CO → 2Fe + 3CO₂

To determine the number of moles of CO needed to react with 4.00 kg of Fe₂O₃, we need to first convert the mass of Fe₂O₃ to moles using its molar mass:

molar mass of Fe₂O₃ = 159.69 g/mol

moles of Fe₂O₃ = 4.00 kg / (1000 g/kg) / 159.69 g/mol = 0.0250 mol

According to the balanced equation, 3 moles of CO react with 1 mole of Fe₂O₃. Therefore, we can use a proportion to find the number of moles of CO:

0.0250 mol Fe₂O₃ / 1 mol Fe₂O₃ = x mol CO / 3 mol CO

x mol CO = 0.0250 mol Fe₂O₃ × 3 mol CO / 1 mol Fe₂O₃ = 0.0750 mol CO

Therefore, 0.0750 moles of CO are needed.

To know more about molar masses, visit:

https://brainly.com/question/22997914

#SPJ1

To determine the number of moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃, we need to use the formula relating molarity to moles and volume.

In chemistry, a mole is a unit of measurement used to show the measure of a chemical entity. One mole of a substance is defined as the amount of that substance that contains the same number of particles, such as atoms, molecules, or ions, as there are atoms in exactly 12 grams of carbon-12.

To determine the number of moles of Al₂(SO₄)₃  present in 50.0 mL of 0.250 M Al₂(SO₄)₃ , we need to use the formula:

Molarity (M) = moles (n) / volume (V)

Rearranging the formula, we get:

n= M*V

First, let's convert the volume of 50.0 mL to liters:

50.0 mL = 50.0 x 10⁻³ L

Next, we can substitute the given values into the formula:

moles of Al₂(SO₄)₃  = 0.250 M x 50.0 x 10⁻³ L

moles of Al₂(SO₄)₃  = 0.0125 mol

Therefore, there are 0.0125 moles of Al₂(SO₄)₃  present in 50.0 mL of 0.250 M Al₂(SO₄)₃.

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

Here is a step-by-step guide for guiding students on how to write balanced chemical equations and ionic equations:

Steps:

1. Determine the reactants and products: Start by identifying the reactants and products in the chemical reaction. This involves reading the problem and identifying the substances that are being reacted.

2. Write the unbalanced equation: Once the reactants and products have been identified, write the unbalanced chemical equation using the chemical formulas for each reactant and product.

3. Balance the equation: To balance the equation, adjust the coefficients of the reactants and products so that the number of atoms of each element is equal on both sides of the equation. Begin by balancing the atoms of elements that appear only once on each side of the equation, and then move on to elements that appear more than once.

4. Check the balanced equation: After balancing the equation, double-check to make sure that the number of atoms of each element is the same on both sides of the equation.

5. Write the ionic equation: To write the ionic equation, break apart any soluble ionic compounds into their individual ions. Then, cancel out any spectator ions that appear on both sides of the equation.

6. Check the ionic equation: Double-check the ionic equation to make sure that the same number and type of ions appear on both sides of the equation.

7. (Optional) Include states of matter: It is common practice to include the states of matter (solid, liquid, gas, aqueous) of the reactants and products in the chemical equation. This can be done by using abbreviations in parentheses after each chemical formula.

By following these steps, students can learn how to write balanced chemical equations and ionic equations accurately and efficiently.

To know more about ionic equations, visit:

https://brainly.com/question/29299745

#SPJ1

Answer:

the resulting solution is 1.5 M.

Explanation:

To solve this problem, we can use the dilution formula:

M1V1 = M2V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

We are given that 15.0 mL of a 3.00 M hydrochloric acid solution has been diluted, and we want to find the molarity of the resulting solution. Let's use M1 for the initial concentration, V1 for the initial volume, M2 for the final concentration, and V2 for the final volume.

M1 = 3.00 M

V1 = 15.0 mL

V2 = 30.0 mL (since 15.0 mL has been diluted to 30.0 mL, the final volume is 30.0 mL)

We can rearrange the dilution formula to solve for M2:

M2 = (M1V1) / V2

Substituting the given values, we get:

M2 = (3.00 M x 15.0 mL) / 30.0 mL

M2 = 1.50 M

Therefore, the molarity of the resulting solution is 1.5 M.

Answer:  A from the burial and decomposition of plant material.

Explanation:

To calculate the theoretical yield of aspirin, we need to know the balanced equation for the reaction between salicylic acid and acetic anhydride, which is:

salicylic acid + acetic anhydride → aspirin + acetic acid

The balanced equation tells us that one mole of salicylic acid reacts with one mole of acetic anhydride to produce one mole of aspirin and one mole of acetic acid.

The molar mass of salicylic acid is 138.12 g/mol, so 1.953 g is equal to:

1.953 g / 138.12 g/mol = 0.01414 mol salicylic acid

According to the balanced equation, one mole of salicylic acid produces one mole of aspirin. The molar mass of aspirin is 180.16 g/mol, so the theoretical yield of aspirin is:

0.01414 mol aspirin × 180.16 g/mol = 2.55 g aspirin

Therefore, the theoretical yield of aspirin from 1.953 g of salicylic acid is 2.55 g.

An acid is a chemical compound or substance that can donate hydrogen ions (H+) or accept electrons in chemical reactions, or a substance that can lower the pH of a solution by releasing H+ ions. Acids have a sour taste and can react with bases to form salts. They are commonly used in industries such as food, pharmaceuticals, and chemical manufacturing. Examples of common acids include hydrochloric acid, sulfuric acid, and acetic acid.

To know more about acid visit :

https://brainly.com/question/14072179

#SPJ1

The product of Ga₂S₃ + CaBr₂ is CaS and GaBr₃ , where 2 and 3 are stoichiometric coefficients. The balanced chemical reaction is 2Ga₂S₃ + 6CaBr → 6CaS + 2GaBr₃. The sum of the coefficients is 5.

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction. In other words, both sides of the reaction have an equal balance of mass and charge.

The reactants and products of a chemical reaction are listed in an imbalanced chemical equation, but the amounts necessary to meet the conservation of mass are not specified. For instance, the mass balance of the following equation for the reaction between iron oxide and carbon to produce iron and carbon dioxide is off:

Fe₂O₃ + C → Fe + CO₂

The equation must be balanced so that each type of atom appears in equal amounts on both the left and right sides of the arrow. This is accomplished by altering the compounds' coefficients (numbers placed in front of compound formulas). In this example, the subscripts (tiny numbers to the right of some atoms, including iron and oxygen) are never altered. The chemical identification of the compound would change if the subscripts were changed.

2 Fe₂O₃ + 3 C → 4 Fe + 3 CO₂

To know more about conservation of mass, visit:

https://brainly.com/question/23218279

#SPJ1

[tex]Molarity = \frac{Moles(solute)}{Volume(solution)}[/tex]

    ★    I hope it helps you :)........

Answer:Mitosis is the process in which a single cell divides to form two identical cells, while meiosis is a type of cell division that results in four daughter cells with half the number of chromosomes as the parent cell.

Explanation:

There are 0.6 moles of sodium chloride in a 250 mL solution with a molarity of 2.4 M sodium chloride.

This leads us to the conclusion that a 250 mL solution of a 0.5 M sodium chloride contains 0.125 moles and 7.32 grammes of sodium chloride, respectively.

A solution with a concentration of 0.4 M contains 0.4 moles of solute per litre of solution. By utilising dimensional analysis, you may calculate how many moles of solute are present in 250 mL of the solution. litre and millilitre units

To know more about sodium chloride visit:-

https://brainly.com/question/9811771

#SPJ1

Water is a tiny molecule.

it consists of three atoms : two of hydrogen and one of oxygen. Water molecules cling to each other because of a force called hydrogen bonding.

To determine whether the resulting solution is neutral, we need to calculate the moles of H+ and OH- ions present in the solution and compare their concentrations.

First, we can calculate the moles of H+ ions present in the solution by using the equation:

moles H+ = volume (L) x concentration (mol/L)

moles H+ = (50.0 mL + 100.0 mL) x 0.100 mol/L = 15.0 x 10⁻³ mol

Next, we can calculate the moles of OH- ions present in the solution by using the equation:

moles OH- = volume (L) x concentration (mol/L)

moles OH- = (500.0 mL + 200.0 mL) x 0.0100 mol/L = 7.0 x 10⁻³ mol

Since the number of moles of H+ and OH- ions are not equal, the resulting solution is not neutral. To calculate the concentration of excess H+ or OH- ions left in solution, we need to determine which ion is present in excess.

Since HCl and HNO3 are strong acids and Ca(OH)2 and RbOH are strong bases, we can assume that all of the H+ and OH- ions from the acids and bases will react completely to form water. Therefore, we can calculate the excess H+ or OH- ions by comparing the moles of H+ and OH- ions present in the solution.

moles H+ - moles OH- = (15.0 x 10⁻³mol) - (7.0 x 10⁻³ mol) = 8.0 x 10⁻³ mol

Since the moles of H+ ions are greater than the moles of OH- ions, there is an excess of H+ ions in the solution. To calculate the concentration of excess H+ ions, we can divide the moles of H+ ions by the total volume of the solution in liters:

[H+] = moles H+ / volume (L)

[H+] = 8.0 x 10⁻³ mol / (50.0 mL + 100.0 mL + 500.0 mL + 200.0 mL) = 3.2 x 10⁻⁴M

Therefore, the resulting solution is not neutral, and it has an excess of H+ ions with a concentration of 3.2 x 10⁻⁴ M.

To know more about concentration, visit:

https://brainly.com/question/10725862

#SPJ1

Answer: It is homozygous recessive for blue eyes.

Explanation: If an individual has blue eyes, it means that they must have received two recessive alleles for eye color (bb) – one from each parent. Therefore, the genotype of an individual with blue eyes is homozygous recessive for blue eyes.

0.0652 moles of bromine gas would occupy a volume of 20 L at a pressure of 0.90 atm and a temperature of 90°C.

To solve this problem, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 90°C + 273.15 = 363.15 K

Next, we need to convert the pressure from atm to kPa:

0.90 atm x 101.3 kPa/atm = 91.17 kPa

Now we can plug in the values we have:

n = (PV) / (RT)

n = (91.17 kPa x 20 L) / (8.31 L kPa/K mol x 363.15 K)

n = 0.0652 mol.

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ1