Answer:
To solve this problem, you can use the formula F = ma, where F is the force applied to an object, m is the mass of the object, and a is the acceleration of the object. In this case, the force applied to the object is 51.3 newtons and the acceleration of the object is 48.7 m/s2. So, you can set up the equation like this:
51.3 newtons = m x 48.7 m/s2
To solve for the mass of the object, you can divide both sides of the equation by 48.7 m/s2:
51.3 newtons / 48.7 m/s2 = m x 48.7 m/s2 / 48.7 m/s2
This simplifies to:
1.05 kg = m
So, the mass of the softball is approximately 1.05 kilograms.
A cannonball is launched horizontally from the top of a 166 m
cliff with an original speed of 35.9 m/s.
Determine the horizontal displacement (in m) of the cannonball.
The horizontal displacement of the cannonball is 65.75 meter.
What is speed?Speed is characterized as the rate at which an object's position changes in any direction. The distance travelled in relation to the time it took to travel that distance is how speed is defined. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
original speed: u= 35.9 m/s.
acceleration due to gravity: g = 9.8 m/s².
Initial height of the cannonball = 166 m.
Hence, the horizontal displacement of the cannonball = u²/2g
= 35.9²/(2×9.8) meter
= 65.75 meter.
so, the displacement of the cannonball is 65.75 meter.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
A typical sound wave has a wavelength of 1 meter. The wavelength of green light is about 500 billionths of a meter. Which type of wave will tend to diffract more through a narrow gap that is about 1 centimeter wide? Explain.
Answer: Sound wave diffracts more.
Explanation: Width of gap d is smaller than wavelength λ of the gap.
You can estimate it from equation d sin α = n λ
The constant n is order of diffraction, n = 0,1,2,..
sin α = n λ / d is greater when λ/d is greater.
Sound wave will tend diffract more through a narrow gap that is about 1 centimeter wide.
What is Diffraction?Diffraction is the spreading of waves around obstacles. Diffraction takes place with sound; with electromagnetic radiation, such as light, X-rays, and gamma rays; and with very small moving particles such as atoms, neutrons, and electrons, which show wave like properties.
d sin α = n λ
Width of gap d is smaller than wavelength λ of the gap.
The constant n is order of diffraction, n = 0,1,2,..
sin α = n λ / d
Diffraction is greater when λ/d is greater.
To learn more Diffraction about here
https://brainly.com/question/12290582
#SPJ2
I walked 45 m East then turned to the north and walked 30 m. What was the magnitude of my displacement?
The magnitude displacement vector's magnitude (or length), which is indicated by the arrow's length, measures the separation between the locations.
How can I determine how much movement there is?d = (((x2 - x1)2 + (scaling factor - y1)2)12 represents the displacement's magnitude. The displacement vector's size, or distance d, is its length. The guided line segment connecting P1 and P2 is the displacement vector's (d) direction. We refer to this straight line segment as a geometric or look of the scalar d.
What is a displacement example of what magnitude?When we talk about magnitude, we don't only imply the amount of a displacement; we also imply its orientation just a number with a unit As just an illustration, the professor might repeatedly pace back and forth, possibly
To know more about magnitude visit :
https://brainly.com/question/29766788
#SPJ4
If an object was traveling horizontally off a cliff at 6 m/s for 3 seconds, how long did it take to
hit the ground?
The time taken by the object to hit the ground is 1.8 seconds.
What do you mean by gravitational force?The attraction that draws two objects together is known as gravitational force, sometimes referred to as gravity. Every mass-containing object pulls on nearby things gravitationally in a sizable way.
The time it takes for an object to hit the ground after being dropped off a cliff can be calculated using the formula:
t = √(2*d/g)
where t is the time, d is the distance fallen, and g is the acceleration due to gravity.
In this case, we don't know the distance fell, but we can use the horizontal velocity and time of travel to find it:
d = v * t
where v is the velocity (6 m/s), and t is time (3 seconds)
d = 6 * 3 = 18 m
Now we can use the distance fallen to calculate the time it takes to hit the ground:
t = √(2*d/g)
g is approximately 9.8 m/s^2
t = √(2*18/9.8) = √ (3.6) = 1.8 seconds
So, it takes 1.8 seconds for the object to hit the ground after traveling horizontally off a cliff at 6 m/s for 3 seconds.
To know more about gravitational force, visit:
brainly.com/question/12528243
#SPJ1
The person in the figure below is pulling a heavy load. However, the load is resisting the forward motion. The figure can act as a model for what happens in electrical conductors, cells and batteries, and electrical devices in a circuit.
1. Write a paragraph that explains what you think each circuit component would represent in the model, and why.
2. How does the figure model resistance in a circuit?
The components of an electrical circuit represented by the model are as follows:
the man pulling the load represents the battery or cellthe cord used by the man to pull the load represents the conductors such as wiresthe load pulled by the man represents the resistance.The figure models resistance in a circuit because just as resistance in a circuit opposes the flow of current, the load resists the movement of the man.
What is an electrical circuit?An electrical circuit is a complete path that is provided for the flow of electric current.
Tue components of an electric circuit includes:
electrical conductors,cells and batteries,resistancesloads such as electrical bulbs in the circuit.Learn more about electrical circuits at: https://brainly.com/question/2969220
#SPJ1
If you pushed against the 3000 kg truck with a force of 1000 N for 5 s, how fast would the truck be moving?
Answer:
V = 1.67 m/s
Explanation:
Given the following data;
Force = 1000 N
Mass = 3000 kg
Time = 5 seconds
To find the speed of the truck;
First of all, we would find the acceleration
Force = mass * acceleration
1000 = 3000 * acceleration
Acceleration = 1000/3000
Acceleration = 0.333 m/s²
Using the first equation of motion, we would determine the speed;
V = u + at
Initial velocity is equal to zero because the truck starts from rest.
V = 0 + 0.333*5
V = 1.67 m/s
A centripetal force of 250 N is exerted on a 2.2 kg discus as it rotates uniformly in a horizontal circle of radius 0.85 m. Calculate the speed of the discus in both m/s and rotations per minute?
Answer:
133m/s
Explanation:
b/c 250÷2.2÷0.85=133
A 5 kg block is on a frictionless surface. A 15 n force is applied To the the block in a direction parallel to the surface. What is the acceleration of the block?
The acceleration is 3 [tex]m/s^2[/tex] when a block with a mass of 5 kg is pulled with a force of 15 n.
The block will experience a net external force of 15 N due to the frictionless surface it is kept in place on.
The block weighs 5 kg.
F = m × a
There is a net external force (F), mass (m), and acceleration acting on the object in this situation (a).
Using the appropriate values in place of F and m:
15 = 5 × a
15/5 = a
3=a
Taking 5 as a factor, we get 3 = a.
As a result, a 5-kilogram item is drawn over a friction less surface with an acceleration of 15 N is 3 m/s².
For such more question on acceleration.
https://brainly.com/question/14344386
#SPJ4
The centripetal force on object M as it passes
through the rest position is approximately
Since the particle always moves in a circular motion in a direction perpendicular to the radial direction.
The work done by the centripetal force in a circular motion is therefore always zero since the dot product is always zero. A force known as the centripetal force acts on a particle when it is revolving around a specific axis or point. The circular path's center is where this force is directed. The ideal decision is (d) Therefore, the body's weight will be equal to the centripetal force when the angular acceleration reaches the same level as the acceleration caused by gravity. It should be noted that for the centripetal force to equal the weight, there must be a uniform circular motion.
Learn more about acceleration here-
https://brainly.com/question/12550364
#SPJ4
What is the combined resistance of 5 ohms wire arranged in series with a parallel arrangement of 4 ohms and 6 ohms wires
Answer:
7.4 Ω
Explanation:
Let,
R1 = 5 Ω
R2 = 4 Ω
R3 = 6 Ω
R1 is connected series.
R2 and R3 are connected in parallel.
1 / Rp = 1 / R2 + 1 / R3
= 1 / 4 + 1 / 6
= 3 / 12 + 2 / 12
1 / Rp = 5 / 12
Rp = 12 / 5 = 2.4 Ω
Effective resistance
= R1 + Rp
= 5 + 2.4
= 7.4 Ω
Therefore, the combined resistance of 5 ohms wire arranged in series with a parallel arrangement of 4 ohms and 6 ohms wires is
7.4 Ω.
What is the reason why a yellow colored object looks white in a dimmed light or low intensity of light?
The reason why a yellow colored object looks white in a dimmed light or low intensity of light the colors wavelength have the colors more farther it means it's getting more dimmed.
The wavelengths of sound waves are similar to the size of objects around you, but the wavelength of light waves are much shorter. As a result, you can hear people talking in a room with an open door even though you can’t see them.
The amount of diffraction or bending of the wave depends on the size of the obstacle the wave encounters. If the size of the obstacle is much larger than the wavelength, very little diffraction occurs. Then there is a shadow behind the object where there are no waves.
As the wavelength increases compared with the size of the obstacle, the amount of diffraction increases. The amount of diffraction is greatest if the wavelength is much larger than the obstacle.
To know more about wavelengths here
https://brainly.com/question/2429109
#SPJ4
What is the position of the particle at time t 0?
The position of the particle is zero because the velocity is zero for the particle. The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point and the position of the particle is zero because the velocity is zero for the particle.
Learn more about Velocity:
brainly.com/question/18084516
#SPJ4
To report the position of an object, first choose a reference point. Then, describe the of the object with respect to the reference point. Next, measure the from the reference point to the object.
We will understand the given concept through an example
The rat serves as your point of reference if you mentioned that the rabbit was to the left of it. You are expressing its position when you specify the distance and direction. The present separation and direction of an object from a reference point is its position.
When something moves with relation to a reference frame, like when a passenger gets off an airline or a lecturer gets up to leave, the object's position changes.the right in relation to a whiteboard. Displacement describes this shift in location.Every location helps you to achieve various location positions.Your position is defined by how you describe your place. The separation in the first illustration is one meter. The reference point helps to locate each and every point.To know more about reference point here
https://brainly.com/question/17706833
#SPJ4
Here's the screenshot
A wagon wheel is a ring (hoop) of mass 77.1 kg and radius of 0.630 m. If it has 182 J of rotational KE, what is its angular velocity?
Answer:
3.44
Explanation:
Acellus said it was right. :) Just figure out the inertia first and plug it into the Rotational KE equation.
If researchers failed to take into account the effect of air resistance on the pitch, how would it impact their measurements of the efficiency of energy transfer from the arm to the baseball
The efficiency of energy transfer from the arm to the baseball would be lower than the actual efficiency, as there was a higher initial velocity at release.
In order to answer this question, we must look at the experimental design and assess how air resistance would affect the scientists' computations. The ball's velocity would be reduced as it moved from the mound to home plate, where the velocity was measured, due to air resistance.
Therefore, the measured velocity ought to be lower than the release velocity. As a result of the baseball's predicted energy being lower due to the lowered velocity, the efficiency of the energy transfer from the arm to the ball will also be lower.
To know more about baseball:
https://brainly.com/question/9562240
#SPJ4
A ramp is 12 meters long and I need to use it to raise up a box 4 meters. The box weighs 200 newtons. How much force are you going to need to exert to get the box up the ramp
The force required to raise the box up the ramp when the ramp is 12 meters long, the box is 4 meters and the box weighs 200 newtons is 653.33 N (7840/12)
How do you determine the force required to raise the box up the ramp?To determine the force required to raise the box up the ramp, we can use the work-energy principle.
Work = Change in PE
W = PEf - PEi
where
W = work done (Joules)
PEf = final gravitational potential energy (Joules)
PEi = initial gravitational potential energy (Joules)
The gravitational potential energy of an object is given by the formula:
PE = mgh
where
m = mass of the object (200 N)
g = acceleration due to gravity (9.8 m/s^2)
h = height (4 meters)
We can find the change in potential energy as follows:
PEf = mgh = 200 x 9.8 x 4 = 7840 J
PEi = mgh = 200 x 9.8 x 0 = 0 J
So, the change in potential energy is 7840 J.
Now we can calculate the work done as:
W = PEf - PEi = 7840 - 0 = 7840 J
The work done is equal to the force exerted on the object multiplied by the distance it is moved:
W = F x d
7840 = F x 12
So, the force required to raise the box up the ramp is 653.33 N (7840/12)
Learn more about force from the given link.
https://brainly.in/question/23858054
#SPJ4
light travels 300000 km/s,is it velocity or speed
Answer:
speed
Explanation:
Answer:
Velocity
Explanation:
Velocity is km/s
Which of the following would be potential impacts of global climate change on thermohaline circulation in the oceans?
A: slowing the rate of circulation
B: no effect of circulation
C: changing the direction of circulation
D: increasing the rate of circulation
The potential impacts of global climate change on thermohaline circulation in the oceans is increasing the rate of circulation. That is option D.
What is thermohaline circulation?The thermohaline circulation is defined as the process by which deep-ocean currents are driven by differences in the water's density, which is controlled by temperature (thermo) and salinity (haline).
When there is global climate change increased temperature of water masses would cause these currents to flow faster given the higher kinetic energy of the water molecules.
Therefore, there is increase in rate of circulation when there is global climate change.
Learn more about climate change here:
https://brainly.com/question/24793273
#SPJ1
What is the magnitude of the passenger's acceleration as she passes through the lowest point in her circular motion
The magnitude of the passenger's acceleration as she passes through the lowest point in her circular motion is the centripetal acceleration.
This is given by the equation a = v^2 / r, where v is the velocity of the passenger and r is the radius of the circle. Therefore, the magnitude of the passenger's acceleration is equal to the square of her velocity divided by the radius of the circle.
For example, if the passenger is travelling at 10 m/s in a circle with a radius of 5 m, then her centripetal acceleration would be 10^2 / 5 = 20 m/s^2.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ4
Una luz (con una longitud de onda de 600 nm y velocidad de la luz de c = 3 × 108 m⁄s), que proviene del aire incide en glicerina con un ángulo de 30°. Después de pasar por la glicerina, entra en diamante, después pasa por cuarzo y por último sale de nuevo al aire. Calcule el ángulo de refracción al pasar el rayo en cada medio, también calcule la velocidad de la luz en cada medio y la longitud de onda en cada medio
Answer:
a) angles 19.8º, 11.9º, 13.8, 20.4
b) speed 3 10⁸ m/s, 2,037 10⁸ m/s, v = 1.24 10⁸ m/s, v = 2.06 10⁸ m/s
c) wavelength 600 nm, 407.3 nm, 248.0 nm, 411.5 nm
Explanation:
For this exercise let's use the law of refraction
n₁ sin θ₁ = n₂ sin θ₂
where subscript 1 is for the middle of the incident ray and subscript 2 for the middle of the refracted ray
the refractive index is related to the speed of the lightning in the middle
n = c / v
When the ray enters a material medium, it is absorbed and re-emitted by the atoms in the medium, the frequency remains constant, it is a resonant system, but as the speed of light changes in the medium, the wavelength must change to keep the equation
in the void
c = λ f
in the material medium
v = λ f
[tex]\frac{c}{\lambda_o} = \frac{c}{\lambda_n}[/tex]
λₙ = [tex]\frac{v}{c} \ \lambda_o[/tex]
λₙ = λ₀ / n
we used these expressions to our case
1) medium incident air n₁ = 1 medium transmitted n₂ = 1.473
sin θ₂= [tex]\frac{n_1}{n_2}[/tex] sin θ₁
sin θ₂ = 1/1,473 sin 30
θ₂ = sin⁻¹ 0.3394
θ₂ = 19.8º
2) medium incident glycerin θ₁ = 19.8, medium transmitted diamond θ₂=2.419
sin θ₂ = 1.473/2.419 sin 19.8
θ₂ = sin⁻¹ 0.2067
θ₂ = 11.9º
3) half incident diamond θ₁ = 11.9º, half transmitted quartz n₂ = 1.458
sin θ₂= 2.419/1.458 sin 11.9
θ₂ = sin⁻¹ 0.3429
θ₂ = 13.8º
4) half incident quartz θ₁ = 13.8, medium transmitted air n₂ = 1
sin θ₂ = 1.458/1 sin 13.8
θ₂ = sin⁻¹ 0.3467
θ₂ = 20,4º
b) we look for the speed of lightning in each medium
air v = c = 3 10⁸ m / s
glycerin v = c / n
v = 3 108 / 1,473
v = 2,037 10⁸ m / s
diamond v = 3 108 / 2.419
v = 1.24 10⁸ m / s
quartz v = 3 108 / 1.458
v = 2.06 10⁸ m / s
c) the wavelength in each medium
air λₙ = λ₀/ n
λₙ = 600/1
λₙ 600 nm
glycerin
λₙ = 600 / 1,473
λₙ = 407.3 nm
Diamond
λₙ = 600 / 2.419
λₙ = 248.0 nm
quartz
λₙ = 600 / 1.458
λₙ = 411.5 nm
A car moving with an initial speed v collides with a stationary car that is one- half as massive. After the collision, the first car moves moves in the same direction as before with the speed v/3. a) Find the final speed of the second car b) What type of collision is it (elastic or inelastic)
The final speed of the second car is '2v' and the collision is elastic collision.
What exactly are elastic collisions?The elastic collision is one in which the system does not experience a net loss of kinetic energy as the result of a collision. In elastic collisions, momentum & kinetic energy are both conserved.
v′ = m1v1 + m2v2 /m1+m2
v ′ = m 1 v 1 + m 2 v 2/ m 1 + m 2
in which m1 is mass of body 1, v1 is its initial speed, m2 is mass of body 2, & v2 is the final speed at which the two objects will be moving after colliding.
m1v +0 = mv/3 +m/3v2
v2 = 2v
To know more about elastic collision visit:-
https://brainly.com/question/12644900
#SPJ4
PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST THIS IS A SCIENCE QUESTION
Fusion reactions in the sun change nuclear energy into
mechanical energy
chemical energy
electromagnetic energy
potential energy
Answer:
Electromagnetic energy
A musical note has a frequency of 512 Hz. If the wavelength of the note is 0.685 m, what is the speed of the sound of that note?
Answer:
350.72 m/s
Explanation:
Formula for velocity of wave is;
v = fλ
Where;
v is speed
f is frequency
λ is wavelength
We are given;
f = 512 Hz
λ = 0.685 m
Thus;
v = 512 × 0.685
v = 350.72 m/s
Viruses are hard to get rid of
because they spread easily. Which
of the following describes why they
spread easily?
A contain no genetic
material
B. are living organisms
C. cannot reproduce
D. reproduce quickly
The answer is D, they reproduce quickly.
Answer: D. Reproduce quickly
Explanation:
A doesn’t really have much to do with it. B. isn’t true because viruses are not living. C. is also not true because they can, so D.
The upper and lower fixed points of a mercury thermometer corresponds to 9.00mV and 16.50mV on the thermocouple thermometer. The temperature of a warm iron giving a reading of 11.21mV to the nearest whole number is.
To find the temperature of the warm iron, we first need to convert the reading on the thermocouple thermometer to a temperature value. To do this, we will use the formula:
Temperature = (Reading - Lower Fixed Point) / (Upper Fixed Point - Lower Fixed Point) * (Upper Temperature - Lower Temperature) + Lower Temperature
In this case, the lower fixed point is 9.00mV and the upper fixed point is 16.50mV. We also know that the lower temperature is 0°C (the freezing point of water) and the upper temperature is 100°C (the boiling point of water). So, we can plug in these values:
Temperature = (11.21mV - 9.00mV) / (16.50mV - 9.00mV) * (100°C - 0°C) + 0°C
Simplifying, we get:
Temperature = (2.21mV / 7.50mV) * 100°C
And further simplifying, we get:
Temperature = 0.2907 x 100°C
So, the temperature of the warm iron is approximately 29.07°C to the nearest whole number.
To learn more about temperature :-
https://brainly.com/question/14161300
Please help! The image produced by a concave mirror is ? .
Answer:
is a reflection.
The image is real light rays actually focus at the image location). As the object moves towards the mirror the image location moves further away from the mirror and the image size grows (but the image is still inverted). When the object is that the focal point, the image is at infinity.
Explanation:
A person finds it easier to lift an anchor through the water than lift it into the boat through the air. Why?
Answer:
because underwater a force called buoyant force of upthrust applies in the objects in water in the upward direction
A car at rest with respect to a building can be in motion with respect to another observer. True/False. Please explain your answer
A 2.0 kg book is lying on a 0.75-m-high table. You pick it up and place it on a bookshelf 2.3 m above the floor. During this process, your hand does _______ work on the book.
The weight of the book and your lifting power will be the only two forces operating, assuming that air resistance is minimal (gravity).
The book's displacement was x=(2.3-0.75)m=+1.55m.
The book weighs W= m(-g)= 2.0 kg(-10N/kg)= 20 N.
Therefore, the weight's work (energy delivered by the weight) is equal to W.x (-20N).
(+1.55m) = -31 Nm =-31 J.
This outcome, -31J, demonstrates that the weight caused the rising book to lose 31J of kinetic energy, increasing the gravitational potential energy of the book.
You lifted the book, which gave it kinetic energy from the chemical energy stored in your muscles. The weight is thereby decreasing the kinetic energy of the book while the lifting force from you increases it.
Learn more about energy here-
https://brainly.com/question/26472013
#SPJ4