what is the relationship between weight and best range airspeed (vbr) and best endurance airspeed (vbe)?

Answer:

Explanation:

Durante as aulas, os estudantes da 3ª série deveriam escolher uma entre as três atividades físicas possíveis, sendo elas: natação, futsal e dança. Na turma, 25% escolheram dança, 15% escolheram natação, e os outros 24 estudantes escolheram futsal. Podemos afirmar que, nessa turma, existe um total de:

A) 64 alunos

B) 55 alunos

C) 48 alunos

D) 45 alunos

E) 40 alunos

If a 100-ohm resistor is connected in series with a 300-ohm resistor, Then the equivalent resistance of the circuit is 400 ohm.

Resistance in electrical circuits is a measure of how much a component or material opposes the flow of electric current through it. It is denoted by the symbol R and is measured in units called ohms, represented by the Greek letter omega (Ω).

When resistors are connected in series, their resistances add up to give the total or equivalent resistance of the circuit.

Now, to find the equivalent resistance of a circuit with a 100-ohm resistor and a 300-ohm resistor in series, we simply add their resistances together:

Equivalent resistance = 100 ohm + 300 ohm

Equivalent resistance = 400 ohm

Therefore, the equivalent resistance of the circuit is 400 ohms.

To learn more  about resistors in a series click:

https://brainly.com/question/9049762

#SPJ2

The magnitude of the force on the ball is 8.1e-5 N.

The force on a charged particle moving in a magnetic field is given by the formula:

F = q(v x B)

F = |-3e-6| x |9| x |3| = 8.1e-5 N

Force is a quantitative description of the interaction between objects that causes a change in motion or deformation. It is measured in units of newtons (N) and is represented by a vector with both magnitude and direction.

There are four fundamental forces in nature: gravitational, electromagnetic, strong nuclear, and weak nuclear forces. Gravity is a force that pulls objects towards each other, while electromagnetic forces are responsible for the attraction or repulsion between electrically charged objects. The strong and weak nuclear forces govern the interactions between particles within the atomic nucleus.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

When you perform a simple action like answering your phone, the activity of individual neurons in your nervous system enables you to take in information from your environment and coordinate a response.

When a neuron receives a signal from a dendrite, it generates an electrical impulse called an action potential, which travels down the length of the axon. At the end of the axon, the electrical signal triggers the release of neurotransmitters, which are chemical messengers that transmit the signal to other neurons or muscle cells.

The neurotransmitters bind to specific receptors on the dendrites of the next neuron or muscle cell, which generates a new electrical signal and starts the process over again. This process of neurotransmission allows for rapid communication and coordination between neurons, which is necessary for even simple actions like answering your phone.

Find out more on neurons at https://brainly.com/question/23136831

#SPJ1

The resistance of the tungsten filament in an 85-watt, 120-volt incandescent light bulb at its operating temperature of about 2800 K is approximately 1.20 Ω.

R = [tex]\frac{V^2}{P}[/tex]

[tex]I = \frac{P}{V} = \frac{85 W}{ 120 V} = 0.708 A[/tex]

The resistivity of tungsten at 20°C is about 5.6 x [tex]10^{-8}[/tex] Ωm.

The cross-sectional area of the tungsten filament can be calculated using the formula:

A = (pi x d²) / 4

where d is the diameter of the filament. Let's assume the diameter of the filament is 0.1 mm (or 1 x [tex]10^{-4}[/tex] m).

A = (pi x (1 x [tex]10^{-4}[/tex])²) / 4 = 7.85 x [tex]10^{-9} m^2[/tex]

R = (rho x L) / A

R = (5.6 x [tex]10^{-8}[/tex] Ωm x 3 x [tex]10^{-2}[/tex] m) / 7.85 x [tex]10^{-9} m^2[/tex] = 0.215 Ω

Now we can calculate the resistance of the tungsten filament at its operating temperature of 2800 K using the formula:

R' = R x (1 + alpha x deltaT)

R' = 0.215 Ω x (1 + 4.5 x [tex]10^{-3} k^{-1}[/tex]x 2507 K) = 1.20 Ω

Resistance arises due to the interactions between charged particles (such as electrons) and the atoms and molecules that make up the material. These interactions cause the charged particles to collide with other particles, and as a result, lose some of their energy, which hinders their flow through the material.

The amount of resistance depends on several factors, including the type of material, its dimensions, and its temperature. Materials that are good conductors of electricity, such as metals, have low resistance, while insulators have high resistance.

Resistance plays an important role in many electrical applications, including the design of electrical circuits and the operation of electronic devices. It can be controlled and manipulated through the use of various components, such as resistors, which are used to regulate the flow of current in a circuit.

To learn more about Resistance visit here:  

brainly.com/question/30799966

#SPJ4

If a 21.00-kg child slide from a height of 3.40 m above the bottom of the slide and her speed at the bottom is 2.30 m/s, the amount of energy lost due to friction is 644.18 J.

The potentiаl energy of аn object depends on the locаtion of the object from the bottom reference floor аnd the mаss of the object. The аmount of energy contаins by the object аt аny height is known аs the potentiаl energy of thаt object.

We are given:

The energy of the child at the upper end of the slide is,

[tex]E_{u}[/tex] = mgh

Substitute the values in the above equation

[tex]E_{u}[/tex] = 21 kg × 9.8 m/s2 × 3.40 m

= 699.72 J

The energy at the bottom of the slide is,

[tex]E_{b}[/tex] = [tex]\frac{1}{2}(mv^{2})[/tex]

Substitute the values in the above equation.

[tex]E_{b}[/tex] = [tex]\frac{1}{2}(21.2.30^{2})[/tex]

[tex]E_{b}[/tex] = 55.54 J

The energy lost due to friction is,

[tex]E_{f}[/tex] = [tex]E_{u}[/tex] - [tex]E_{b}[/tex]

Substitute the values in the above equation

[tex]E_{f}[/tex] = 699.72 - 55.54

[tex]E_{f}[/tex] = 644.18 J

Thus, the energy lost due to friction is 644.18 J.

For more information about potentiаl energy refers to the link: https://brainly.com/question/14904642

#SPJ11

The magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. According to this law, the net force on an object is equal to the mass of the object multiplied by its acceleration.

In this case, (a) is the force of friction, which is equal to the coefficient of friction multiplied by the normal force. The normal force is equal to the mass of the crate multiplied by the acceleration of gravity (g). Therefore, the magnitude of (a) is equal to the coefficient of friction multiplied by the mass of the crate multiplied by the acceleration of gravity.

(b) is the force of the horizontal force applied to the ramp, which is equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp. The magnitude of (b) is therefore equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.

To sum up, the magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. (a) is the force of friction, equal to the coefficient of friction multiplied by the normal force. (b) is the force of the horizontal force applied to the ramp, equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.

To know more about magnitudes  refer here:

https://brainly.com/question/15681399#

#SPJ11

Answer: C) 3M/2

Explanation:

rotational equilibrium at center pivot

mg(R) + Mg(Rcos60°) – 2Mg(R) = 0.

so cos60° = ½  meaning r 3M/2

A wheel of radius r and negligible mass is mounted on a horizontal frictionless axle so that the wheel is in a vertical plane. The value of m in terms of i is m = 2i * r.

The value of m in terms of m, we can use the condition for static equilibrium which states that the sum of all the forces acting on the system must be zero, and the sum of all the torques must also be zero.
Considering the forces acting on the system, we can see that there are only two: the weight of the objects and the tension in the string that connects them to the wheel. Since the system is in static equilibrium, the tension must be equal to the weight of the objects.
Next, let's consider the torques acting on the system. The torques due to weights of the objects are balanced by the torques due to their distances from the axis of rotation. However, the torque due to the tension in the string is not balanced and produces a net torque on the system.
We can calculate the torque due to the tension in the string by multiplying the tension by the radius of the wheel. The torque due to each object can be calculated by multiplying its weight by its distance from the axis of rotation. Since the system is in static equilibrium, the net torque must be zero, which gives us the following equation:
Tension x Radius = (2im) x 2r + m x r - im x r
Simplifying this equation, we get:
Tension x Radius = 4imr + mr - imr
Tension = (5im + m) / r
Since we know that the tension is equal to the weight of the objects, we can equate the tension to the sum of the weights and solve for m:
(5im + m) / r = 5im + m + 2im
m/r = 2im
m = 2i * r
Therefore, the value of m in terms of i is m = 2i * r.

For more such questions on vertical plane

brainly.com/question/30257698

#SPJ11

The ratio of m1 and m2 is 2.81.

The ratio of m1 and m2 can be calculated using Newton's second law of motion, which states that the force F applied to an object is equal to its mass multiplied by its acceleration: F = m * a.

For the two objects given in the question, we have F = m1 * 7.36 m/s2 and F = m2 * 2.62 m/s2.

Therefore, the ratio of m1 and m2 can be found by dividing the first equation by the second: m1/m2 = (m1 * 7.36 m/s2) / (m2 * 2.62 m/s2). Solving for m1/m2, we get m1/m2 = 2.81.

The ratio of m1 and m2 is equal to 2.81, which can be calculated using Newton's second law of motion. According to the equation, the force F applied to an object is equal to its mass multiplied by its acceleration.

For the two objects in the question, we found the ratio of m1 and m2 to be 2.81.

to know more about ratio refer here:

https://brainly.com/question/13419413#

#SPJ11

A good relationship must possess the attributes of communication and trust. Without trust, there can be no intimacy, and without communication, there can be no understanding.

This is a true expression of the truth. In order to build a solid and lasting connection between two individuals, communication and trust are essential elements of a good relationship.

Absolutely! Relationships that lack open and honest communication, as well as trust, are likely to be unstable and can lead to misunderstandings, conflicts, and even a breakdown of the relationship over time. Building a strong foundation of trust and communication can help ensure that a relationship can withstand challenges and grow stronger over time.

learn more about good relationship here:

https://brainly.com/question/30155313

#SPJ4

As Kyle caught the ball, it was moving horizontally at a speed of roughly 0.116 m/s.

Momentum, which is the outcome of an object's mass and velocity, is used to represent mass in motion. An impulse is a force that is used to alter an object's velocity. The impulse, J, and the change in momentum of an object, p=m(vfvi), are equivalent.

mgh = (90.0 kg)(9.81 m/s²)(0.589 m) = 520.6 J

Therefore, Kyle's velocity just as he catches the ball is:

√{1}{2}mv² = 520.6 J implies v = √{2(520.6 J)}{90.0 kg} approx 10.4 m/s

Now, we can use Kyle's velocity and the horizontal distance he traveled to find the time he was in the air. The time is given by:

Delta x = vt implies t = {Delta x}{v} = {0.0396 m}{10.4 m/s} approx 0.0038 s

h = {1}{2}gt² implies t = √{2h}{g} = √{2(0.589 m)}{9.81 m/s²} approx 0.341 s

During this time, the ball traveled a horizontal distance of:

Delta x = vt = (v_{x,ball})(t) implies v_{x,ball} = {Delta x}{t} = {0.0396 m}{0.341 s} approx 0.116 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ9

The equation of motion of the center of mass is given by x = v²/(2g).

The center of mass of an object is a point at which the object can be considered to be a particle with its entire mass concentrated at that point.

When an object moves through space, its center of mass also moves. In this question, we are asked to find the equation of motion of the center of mass of the baton when it is thrown vertically upward by a drum major.

The baton has a mass of m and that it is thrown vertically upward with an initial speed of v. The acceleration due to gravity is g.

We can find the maximum height that the baton reaches using the equation:v² = u² + 2gs

where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and s is the maximum height that the baton reaches.

Since the baton is thrown vertically upward, the initial velocity is v0 = v and the final velocity is zero. So we have:v² = 2gsor:s = v²/(2g).

We can assume that the center of mass moves in a straight line from its initial position to its maximum height and then back down to its original position.

We can find the time taken for the baton to reach its maximum height using the equation:s = ut + (1/2)at²

where u is the initial velocity, a is the acceleration, and t is the time taken. In this case, u = v, a = -g (since the baton is moving upwards), and s = v²/(2g). So we have:v²/(2g) = vt - (1/2)gt²

Solving for t, we get:t = v/gNow we can write the equation of motion of the center of mass of the baton using the equation:x = ut + (1/2)at².

where x is the position of the center of mass, u is the initial velocity (zero), a is the acceleration due to gravity (g), and t is the time taken. So we have:x = (1/2)gt²

x = (1/2)(v/g)² = v²/(2g)The center of mass of the baton moves up to a maximum height of v²/(2g) and then comes back down to its original position.

Hence, The equation of motion of the center of mass is given by x = v²/(2g).

to know more about center of mass refer here:

https://brainly.com/question/28996108#

#SPJ11

Light is radiant energy in the form of a wave of electromagnetic energy.

Light is a form of electromagnetic radiation that is visible to the human eye. It is made up of a stream of energy particles, called photons, that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, which can be used to explain its behavior. It can be described as having both a particle-like nature and a wave-like nature. The particle-like nature of light is exhibited in the way it travels in packets of energy, known as photons. The wave-like nature of light is demonstrated by the way it can be bent, diffracted, and refracted.
The intensity of light is determined by the amount of energy that a photon has. The color of light is determined by the wavelength of the light, with different colors having different wavelengths. Direction is also an important property of light, as it determines how light will be bent when it passes through an obstacle or is reflected off of a surface.
Light plays a critical role in the lives of humans and other organisms. It is used in vision, to help organisms understand the world around them. Light also has numerous applications in science and technology, such as in communications, photography, and solar energy.
In conclusion, light is a form of electromagnetic radiation composed of photons that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, that are used to explain its behavior. Light is important for vision and has various uses in science and technology.

For more such questions on Light.

https://brainly.com/question/13777321#

#SPJ11

1) The main idea and general support of the idea

2)  Why did Leonard decide not to go to lecture

3) Exclamation point

4) Single quotation marks

5) My appointment is scheduled for Monday , July 4.

6) She couldn't believe it; she'd forgotten the cake

7) She gathered all of her ingredients to make a smoothie strawberries blueberries , bananas , and yogurt .

8) Research

9) It makes it feel as if you're shouting at the reader

10) No , because it is a parenthetical element

Punctuation marks are symbols used in writing to clarify meaning and to indicate the structure and organization of written language. There are several different punctuation marks commonly used in English.

Period (.) - used to mark the end of a sentence.

Comma (,) - used to separate items in a list, or to separate clauses in a sentence.

Semicolon (;) - used to separate two independent clauses in a sentence.

Colon (:) - used to introduce a list, explanation, or quotation.

Question mark (?) - used to indicate a question.

Exclamation mark (!) - used to indicate strong emotion or emphasis.

Quotation marks (" ") - used to indicate direct speech or to enclose a quotation.

Learn more about parts of speech:https://brainly.com/question/12011328

#SPJ1

The number of turns is 0.305 which means it is not possible to construct a 25.0- cm solenoid of 160mH inductor.

The inductance of a solenoid depends on several factors such as the number of turns of wire, the length of the coil, and the radius of the coil. The equation to calculate the inductance of a solenoid is given as:

L=μοN²A/l

where L is the inductance, μο is the permeability of free space, N is the number of turns, A is the cross-sectional area, and l is the length of the solenoid.

To find the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm, we can use the following steps.

First, we need to find the cross-sectional area of the solenoid, A. Since the solenoid is cylindrical, we can use the formula for the area of a circle, A=πr², where r is the radius of the solenoid divided by 2.

A=π(6.5/2)²

A=33.18 cm²

Next, we need to convert the length of the solenoid from centimeters to meters, l.

l=25.0 cm×(1 m/100 cm)l=0.25 m

Now we can substitute the values we found into the equation for inductance and solve for the number of turns, N.

L=μοN²A/l

160×10⁻³ H=(4π×10⁷ H/m×N²×33.18×10⁻⁴m²) / 0.25

0.0959=N²

N=√(0.0959)

N=0.306 turns

As we can see from the calculation above, the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm is 0.306 turns. However, this answer does not make sense because it is not possible to have a fractional number of turns.

Therefore, we must conclude that the solenoid is not practical for use as an inductor, and we should use a different type of coil or adjust the parameters of the solenoid to make it practical for use as an inductor.

To know more about the solenoid, refer here:

https://brainly.com/question/15504705#

#SPJ4

The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.

It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.

The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.

The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.

Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.

The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.

By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.

to know more about vector refer here:

https://brainly.com/question/24256726#

#SPJ11

Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.

Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.

Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents.  Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.

To learn more about Sportsmanship visit here:

brainly.com/question/9234010

#SPJ4

Answer: Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.

Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.

Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents.  Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.

Explanation: NOT MINE!

CREDITS : contexto1028

This principle can be observed in other everyday scenarios, such as jumping on a trampoline or the recoil of a gun after firing.  Newton's Third Law of Motion is a fundamental principle in classical mechanics and explains why the spring will bounce when the weight is released.

The bouncing of the weight when released is explained by Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. When the weight is released, the spring exerts an equal and opposite force on the weight, propelling it upwards and causing it to bounce. This is because when the weight is pulled down, it compresses the spring, storing potential energy. When the weight is released, the spring decompresses and the potential energy is released, propelling the weight in the opposite direction.

To learn more about Newton's Third Law ;

https://brainly.com/question/25998091

#SPJ11

No, it is not necessary to limit the charge of your device to 60% when gaming. When it comes to gaming, it is recommended to charge your device between 40-90%.

This is because if your device is fully charged, it may reduce the lifespan of your battery and make it more vulnerable to heat-related damage.

As for light tasks such as web browsing and email, it is best to keep your device's charge between 30-60% in order to maximize battery life.

When it comes to gaming, you should make sure your device is not exposed to extremely high temperatures or charged beyond the recommended range.

Overcharging can damage the battery and lead to overheating which can reduce the performance of your device.

It is important to check the power settings of your device to ensure that your device is not wasting too much power. You can do this by going to the Settings of your device and accessing the Battery menu.

From there you can check what apps are draining the most power and set up the device to reduce power usage.

It is important to maintain the charge of your device in the recommended range while playing games, between 40-90%.

Doing so will help ensure the longevity of your battery and reduce the risk of heat-related damage. Additionally, you should keep an eye on your power settings to ensure that your device is not wasting too much power.

to know more about charge refer here:

https://brainly.com/question/11944606#

#SPJ11

Among the given objects, Jupiter has the smallest radius.

The radius is the distance from the center of a circle or sphere to any point on its perimeter or surface, respectively. We can determine the size of the sphere or circle by calculating its radius.

For the given objects, we can compare their radii to determine which one is the smallest.

The objects are as follows:

a 1.2msun white dwarfa

0.6msun white dwarfw Jupiter

We can compare the radius of these objects as follows:

a 1.2msun white dwarf has a radius of 5,400 kilometers.

a 0.6msun white dwarf has a radius of 3,200 kilometers.

Jupiter has a radius of 69,911 kilometers.

From the above comparison, we can see that Jupiter has the smallest radius.

To know more about Jupiter, refer here:

https://brainly.com/question/10906567#

#SPJ11

The amount of the star's mass converted to energy in the explosion is 1.11 x 10^27 kg.

Calculating energy:

The mass-energy equivalence equation is used to calculate the mass that is converted to energy during a supernova explosion of a 3.2 x 10^31 kg star, producing 1.0 x 10^44 J of energy.

According to Einstein's mass-energy equivalence equation: E = mc² where, E = energy, m = mass, and c = speed of light This equation expresses the relationship between the mass of an object and the amount of energy that can be released from it.

So, to determine the mass that is converted to energy during the supernova explosion, we need to rearrange the equation as m = E/c². Now we have the following data: E = 1.0 x 10^44 Jc = 3.0 x 10^8 m/s² (speed of light). Substitute these values into the equation to get: m = E/c²m = (1.0 x 10^44 J)/(3.0 x 10^8 m/s)²m = 1.11 x 10^27 kg

Therefore, the supernova explosion of a 3.2 x 10^31 kg star converts 1.11 x 10^27 kg of its mass to energy.

To know more about supernova explosions, visit:

https://brainly.com/question/14018571

#SPJ11

The current through the bulb is 2.0 amperes. Then the electric charge that passes through Luighbu is 120 Columbs.

Given that the current through a lightbulb is 2.0 amperes. To find the coulombs of electric charge that pass through the light bulb in one minute, we need to know the formula that relates current, time, and electric charge:

Q = It

Where Q is the electric charge (in coulombs), I is the current (in amperes), and t is the time (in seconds).

To convert one minute to seconds, we multiply it by 60. Hence, the time t = 1 minute × 60 seconds/minute = 60 seconds.

So, the electric charge that passes through the light bulb in one minute is given by

Q = It = 2.0 A × 60 s

Q = 120 C

Therefore, the number of coulombs of electric charge that pass through the light bulb in one minute is 120 C.

Learn more about the electric charge at https://brainly.com/question/25923373

#SPJ11

Answer:

5.95 m/s to the right

Explanation:

Before the collision, the momentum of the system is given by:

p = m1v1 + m2v2

p = (9.00 kg)(14.0 m/s) + (12.0 kg)(-5.00 m/s)

p = 125.0 kg m/s (to the right)

During the collision, the two masses stick together, so their final velocity will be the same. Let's call this final velocity vf. The momentum of the system after the collision is given by:

p' = (m1 + m2)vf

p' = (9.00 kg + 12.0 kg)vf

p' = 21.0 kg vf

Since momentum is conserved in the collision (there are no external forces acting on the system), we can set p = p' and solve for vf:

125.0 kg m/s = 21.0 kg vf

vf = 5.95 m/s (to the right)

Therefore, the final velocity of the combined masses after the collision is 5.95 m/s to the right.

The average force required to stop a 900 kg car in 7.0 s if the car is traveling at 90 km/h is -3213 N.

First, we need to convert the speed from km/h to m/s,

90 km/h = 25 m/s (approx)

We can use the equation,

a = (v_f - v_i) / t

where a is the acceleration, v_f is the final velocity (which is zero since the car comes to a stop), v_i is the initial velocity (which is 25 m/s), and t is the time it takes to come to a stop (which is 7.0 s).

Plugging in the values,

a = (0 - 25 m/s) / 7.0 s = -3.57 m/s^2

The negative sign indicates that the acceleration is in the opposite direction to the car's initial velocity.

Now, we can use Newton's second law of motion, which states that force is equal to mass times acceleration,

F = ma

where F is the force required to stop the car, m is the mass of the car (which is 900 kg), and a is the acceleration we calculated earlier.

Plugging in the values,

F = 900 kg x (-3.57 m/s^2) = -3213 N

The negative sign indicates that the force is in the opposite direction to the car's motion.

To know more about force, here

brainly.com/question/10677614

#SPJ4

Power is the rate at which work is done. Hence most appropriate option among the four given options is the second option which is "The rate at which work is done".

Power is the rate at which work is done or the rate of energy transfer. It is the amount of energy transferred per unit time. The unit of power is the watt (W), which is defined as one joule per second (J/s).

The definition "the amount of energy transferred per unit time" is incomplete because power can vary over time, and this definition only applies when the energy transfer is constant.

The definition "voltage multiplied by current" gives the electrical power in a circuit, but this definition is specific to electrical power, and power can also be in the form of mechanical, thermal, or other types of energy.

The definition "the amount of energy supplied by a battery per unit time" is a measure of the battery's power output, but it is specific to batteries and does not apply to other sources of power.

Therefore, the most complete and accurate definition of power is "the rate at which work is done."

Learn more about batteries:

https://brainly.com/question/30576475

#SPJ11

The beat frequency for two tuning forks producing sounds of wavelength  3.4 meters and 3.3 meters is 3 Hz.

Beat frequency is the difference between the frequencies of the two tuning forks:

beat frequency = |[tex]frequency_{1} - frequency_{2}[/tex]|

We know that wavelength = speed of sound / frequency,

so we can rearrange the formula to get:

frequency = speed of sound / wavelength

Using a speed of sound of approximately 343 m/s (at room temperature), we get:

[tex]frequency_{1}[/tex]= 343 / 3.4 = 100.88 Hz

[tex]frequency_{2}[/tex]= 343 / 3.3 = 103.94 Hz

Taking the difference and rounding to the nearest Hz, we get:

|100.88 - 103.94| ≈ 3 Hz

Therefore, the approximate beat frequency produced is 3 Hz.

To Practice more questions about 'beat frequency':

https://brainly.in/question/54417215

#SPJ11

The magnitude of the force that Alice is applying to the box is 110 N.

To calculate the force that Alice is applying, we need to use the equation F = ma. In this equation, F is the force applied, m is the mass of the box, and a is the acceleration of the box.

Since Alice is pushing the box at a constant speed of 2.8 m/s, the acceleration is 0, and the equation simplifies to F = 0 x m. Since the force must equal 0 when the acceleration is 0, the magnitude of the force that Alice is applying to the box is 0.

However, since Bob is pushing an identical box across the floor at a constant speed of 1.4 m/s, the acceleration is 0 and the equation simplifies to F = m x a. In this case, a is the acceleration of the box, which is 1.4 m/s.

Since we know that the magnitude of the force Bob is applying is 55 N, we can use the equation to calculate the force Alice is applying. 55 N = m x 1.4 m/s, which simplifies to m = 39.286.

We then substitute m back into the equation F = ma, so F = 39.286 x 1.4 m/s. This simplifies to F = 55.0 N, so the magnitude of the force Alice is applying is 55.0 N.

To know more about constant speed click on below link:

https://brainly.com/question/30151073#

#SPJ11

The induced EMF increases to four times its initial value if the rate of change of the magnetic field quadruples.

Faraday's law of electromagnetic induction specifies that an emf (electromotive force) is induced in a closed conductor or coil whenever there is a change in magnetic flux associated with it.

  EMF = − d(ΦB) /dt

  ΦB = BAcosθ

This equation suggests that emf is proportional to the rate at which magnetic flux ΦB is changing with respect to time. As a result, if the rate of change of the magnetic field quadruples, the induced EMF increases to four times its initial value.

Learn more about Faraday's law at https://brainly.com/question/1640558

#SPJ11

Quantum mottle, also known as quantum noise, is caused by a lack of photons reaching the image receptor due to insufficient mAs (milliamperage-seconds) in digital radiography. The correct answer is option : a.

This results in a grainy, speckled appearance in the image. Increasing mAs can help to reduce quantum mottle by providing more photons to the image receptor. However, other exposure factors such as kVp and distance also play a role in achieving a diagnostic quality image while minimizing patient dose. Quantum mottle is caused by insufficient mAs in digital radiography, resulting in a grainy, speckled appearance in the image. Correct answer is option: a.

To Know more about Quantum mottle, here

brainly.com/question/15030239

#SPJ4

The quantities that represent mass are 12.0 lb, 0.34 g, 120 kg, and 411 cm.

Mass is the amount of matter that an object contains. It is a scalar physical quantity that can be determined by weighing an object. The standard unit of mass is kilogram (kg). Mass is constant regardless of the object's location in the universe.

The following are the quantities that represent mass:12.0 lb: It is a unit of mass used in the US and some other countries. It stands for pounds, which is equal to 0.45359237 kg.0.34 g: It is a unit of mass used in the metric system. It stands for grams, which is equal to 0.001 kg.120 kg: It is a unit of mass used in the metric system. It stands for kilograms, which is equal to 1000 g.411 cm: It is a unit of length used in the metric system. It stands for centimeters, which is equal to 0.01 m.

Learn more about metric system at:

https://brainly.com/question/634405

#SPJ11

To clean grease or carbon tracks from capacitors or coils that are used in magnetos, use a good quality electrical contact cleaner. Electrical contact cleaners can remove any dirt, grease, or carbon tracks that may have accumulated on the coils and capacitors used in magnetos.

A capacitor is a device that stores electric charge. It's a passive electrical component that can store energy in an electric field. Capacitors are widely used in electronic circuits for a variety of purposes, including storing electrical energy, separating DC signals from AC signals, and tuning radio frequencies.

A magneto is an electrical generator that converts mechanical energy into electrical energy. It's a type of alternator that is self-contained and does not require a separate power source. Magnetos are used in internal combustion engines, such as those found in automobiles, motorcycles, and aircraft.

To know more about capacitors:

https://brainly.com/question/17511060

#SPJ11