The mass of CH2Cl2 that can be melted by applying 7.80 kJ of energy at the melting point can be calculated using the equation of q = m * c * ΔT, where q is the energy applied, m is the mass, c is the heat capacity, and ΔT is the difference between the final and initial temperatures. In this case, the mass can be calculated as m = q / (c * ΔT). Plugging in the given values yields a mass of 0.126 g, rounded to three significant figures.
Therefore, 7.80 kJ of energy can melt 0.126 g of solid CH2Cl2 at the melting point. The equation used for this calculation assumes that the heat capacity and melting point of CH2Cl2 remain constant throughout the process, and thus the calculated value is only an estimate.
Know more about Melting point here
https://brainly.com/question/29578567#
#SPJ11
What volume of 7.8 M copper (II) sulfate stock solution is needed to prepare 3.25 L of a 5.4 M solution?
WILL MARK BRAINLIEST
Answer:
The volume of 9.0 M copper (II) sulfate stock solution needed to prepare 3.0 L of a 5.0 M solution is 1.667 L
Explanation:
Dilution is a process by which the concentration of a solute in solution is reduced by adding more solvent.
In other words, dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one, and it simply consists of adding more solvent.
In a dilution the amount of solute does not vary. What varies in a dilution is the volume of the solvent: as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
The equation used in this case is:
Ci * Vi = Cf * Vf
where
Ci: initial concentration
Vi: initial volume
Cf: final concentration
Vf: final volume
In this case:
Ci: 9 M
Vi: ?
Cf: 5 M
Vf: 3 L
Generally, what is the effect of increased temperature on the rate of dissolution of a solid solute?
A.
Increased temperature increases the rate.
B.
Increased temperature decreases the rate.
C.
Increased temperature has no effect on the rate.
D.
There is no way to tell
The effect of increased temperature on the rate of dissolution of a solid solute is; Increased temperature increases the rate of dissolution of a solid solute. Option A is correct.
This is because at higher temperatures, the kinetic energy of the solvent molecules increases, leading to more frequent and more energetic collisions with the solute particles. This increased kinetic energy can overcome the intermolecular forces holding the solute together, leading to more rapid dissolution.
The rate of dissolution refers to how quickly a solute dissolves in a solvent to form a homogeneous solution. It is usually expressed as the amount of solute that dissolves per unit time, typically in grams per second or moles per minute.
Hence, A. is the correct option.
To know more about rate of dissolution here
https://brainly.com/question/2459213
#SPJ4
K+ __ cl2 --> __ kci
if you are given 47.5 l of chlorine gas, determine the number of moles of potassium chloride produced.
When given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.
To determine the number of moles of potassium chloride (KCl) produced when given 47.5 L of chlorine gas (Cl₂), follow these steps:
Step 1: Write the balanced chemical equation.
The given equation is K + Cl₂ → KCl. We need to balance it, which will give us:
2K + Cl₂ → 2KCl
Step 2: Convert the volume of chlorine gas to moles using the ideal gas law.
The ideal gas law is PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is temperature in Kelvin. We need to make some assumptions since we are only given the volume (47.5 L). Assuming standard temperature and pressure (STP) conditions, the temperature is 273.15 K, and the pressure is 1 atm.
Rearrange the equation to solve for moles (n):
n = PV/RT
Plug in the values:
n = (1 atm)(47.5 L) / (0.0821 L·atm/mol·K)(273.15 K)
n ≈ 2.05 moles of Cl₂
Step 3: Use the stoichiometry of the balanced equation to find the moles of KCl produced.
From the balanced equation, we see that 1 mole of Cl₂ produces 2 moles of KCl.
Now, use the ratio to find the moles of KCl:
2.05 moles Cl₂ × (2 moles KCl / 1 mole Cl₂) = 4.1 moles of KCl
So, when given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.
To know more about ideal gas law :
https://brainly.com/question/30458409
#SPJ11
Write a balanced equation for the
reaction between baking soda (NaHCO3) and HCl.
Answer:
NaHCO3 + HCl → NaCl + H2O + CO2
Explanation:
Identify a problem of human impact on the environment that could be solved through designing a device or process. A. Define the problem. B. Identify who would be helped by solving this problem. C. List the criteria and constraints of the problem. D. Brainstorm at least two possible solutions to the problem
One of the biggest problems of human impact on the environment is the excessive use of non-renewable resources, such as fossil fuels, which release harmful gases and contribute to climate change.
This problem can be solved by designing a device or process that can harness renewable energy sources, such as solar or wind power, and provide a sustainable alternative to traditional energy sources.
By solving this problem, not only will the environment benefit from reduced carbon emissions, but also the people who rely on these resources. For instance, communities that are vulnerable to the effects of climate change, such as extreme weather conditions, will be better equipped to adapt and withstand these impacts.
The criteria and constraints of designing such a device or process would include factors such as cost, efficiency, scalability, and environmental impact. The solution would need to be cost-effective and efficient, while also being able to provide a significant amount of energy to meet the needs of communities.
Additionally, it would need to be environmentally friendly and have minimal negative impact on ecosystems.
One possible solution could be the development of solar-powered devices that can be used in homes, schools, and businesses to generate electricity. Another solution could be the installation of wind turbines in areas with high wind speeds to generate energy on a larger scale.
Overall, by designing devices or processes that harness renewable energy sources, we can mitigate the negative impacts of non-renewable energy sources on the environment and provide sustainable alternatives for the benefit of both the environment and society.
To know more about non-renewable resources, visit:
https://brainly.com/question/14214221#
#SPJ11
Katja plans an experiment that measures the temperature of different colors of paper placed in sunlight. her hypothesis is that if black, blue, yellow, red, and white sheets of paper are exposed to white light, then the black sheet of paper will increase the most in temperature. katja will place a sheet of each color of paper of the same size and thickness in the same location for the same amount of time. why will katja use different colors of paper in her experiment?
Katja is using different colors of paper in her experiment to test her hypothesis that the black sheet of paper will increase the most in temperature when exposed to white light.
Each color of paper will absorb different wavelengths of light, and the amount of energy absorbed will depend on the color of the paper. Black paper will absorb all wavelengths of light and therefore absorb the most energy, leading to an increase in temperature.
On the other hand, white paper will reflect all wavelengths of light and absorb the least amount of energy, leading to a smaller increase in temperature compared to black paper.
By testing multiple colors of paper, Katja can compare the temperature increases of each color and determine which color absorbs the most energy and which absorbs the least. This will provide her with more data to support her hypothesis and better understand the relationship between color and the absorption of energy from light.
To know more about wavelengths of light, refer here:
https://brainly.com/question/31326088#
#SPJ11
I need help on number 2
In this lab exercise we tried to predict what would be the limiting reagent in each beaker
based on observation of the amount (in mass) of reactant available. In determining the
limiting reagent in a chemical reaction, is it enough to just know the mass of each of the
reactant? Explain.
It is not enough to just know the mass of each reactant to determine the limiting reagent in a chemical reaction. The limiting reagent is the reactant that gets completely consumed during a chemical reaction, which limits the amount of product that can be formed.
To determine the limiting reagent, you need to compare the amount (in moles) of each reactant present, rather than just the mass. This is because different reactants have different molar masses, and therefore the same mass of two different reactants would have different numbers of moles.
Once you have determined the amount (in moles) of each reactant present, you can use stoichiometry to calculate how much product can be formed from each reactant. The reactant that produces the smallest amount of product is the limiting reagent.
To know more about the Reaction, here
https://brainly.com/question/30324543
#SPJ1
g why does the addition of ammonia increase the solubility of the slightly soluble salt agcl? group of answer choices ammonia forms a very soluble complex ion by coordinating to ag and removing it from the solution. this shifts the solubility equilibrium to the right. ammonia reacts with chloride ion, removing it from solution and shifting the solubility equilibrium to the right. ammonia breaks down into hydrogen gas and nitrogen gas, which react with the solid agcl and make it more soluble. ammonia is a lewis acid, which reacts with the chloride lewis base and makes the solid more soluble. ammonia surrounds the agcl molecules and pulls them into solution making them more soluble.
The addition of ammonia increase the solubility of slightly soluble salt AgCl as : ammonia forms very soluble complex ion by coordinating to Ag and removing it from solution. This shifts the solubility equilibrium to right.
Why does the addition of ammonia increase solubility of slightly soluble salt AgCl?When ammonia (NH₃) is added to a solution containing AgCl, it can coordinate with silver ions (Ag+) to form a complex ion called [Ag(NH₃)₂]+, which is highly soluble in water. This complex ion removes the Ag+ ions from the solution, thereby decreasing the concentration of Ag+ in the solution. According to Le Chatelier's principle, this will shift the equilibrium of AgCl dissolution reaction to the right, resulting in increase in the solubility of AgCl.
To know more about solubility, refer
https://brainly.com/question/23946616
#SPJ1
Question: What do the complexity differences between Spectra C and D suggest about the regioselectivity of
bromination of aniline versus acetanilide?
The complexity differences between Spectra C and D suggest that the regioselectivity of bromination of aniline versus acetanilide is different. Specifically, Spectra C shows the proton NMR spectrum of a mixture of aniline and p-bromoaniline, while Spectra D shows the proton NMR spectrum of a mixture of acetanilide and p-bromoacetanilide.
The complexity differences between Spectra C and D suggest that the regioselectivity of bromination of aniline versus acetanilide is different. Specifically, Spectra C shows the proton NMR spectrum of a mixture of aniline and p-bromoaniline, while Spectra D shows the proton NMR spectrum of a mixture of acetanilide and p-bromoacetanilide.
This indicates that the bromination of aniline is less regioselective than the bromination of acetanilide, meaning that multiple products are formed in significant amounts. In contrast, the bromination of acetanilide is more regioselective, resulting in a higher proportion of the desired product (p-bromoacetanilide) and fewer side products. The diffdifferenceerence in regioselectivity is likely due to the fact that the amino group in aniline is more strongly activating towards electrophilic aromatic substitution reactions than the amide group in acetanilide.
Visit to know more about spectra:-
https://brainly.com/question/29004429
#SPJ11
You have twisted your ankle and need to apply a cold pack. You squeeze the bag and as the chemical reaction occurs, you can feel that the pack is getting colder. How would you classify this type of reaction? Using what you understand from our lessons in unit 4, explain how the heat transfers between the cold pack and your skin? Also, describe how the law of conservation of energy applies to this system
The type of reaction that occurs when you squeeze a cold pack is an exothermic reaction. An exothermic reaction is a chemical reaction that releases energy in the form of heat or light. In this case, the reaction between the chemicals inside the cold pack releases heat, which is transferred to your skin when you apply the pack.
The heat transfer between the cold pack and your skin occurs through conduction. Conduction is the transfer of heat between objects that are in direct contact with each other. When you apply the cold pack to your skin, the heat from your skin is transferred to the cold pack through conduction. As the heat is transferred, the cold pack gets warmer and your skin gets cooler.
The law of conservation of energy applies to this system because energy cannot be created or destroyed, only transferred from one form to another. In this case, the chemical reaction inside the cold pack releases energy in the form of heat, which is transferred to your skin through conduction. As the heat is transferred, the temperature of the cold pack decreases, while the temperature of your skin decreases. However, the total amount of energy in the system remains constant.
In summary, when you apply a cold pack to a twisted ankle, the chemical reaction that occurs is an exothermic reaction. The heat transfer between the cold pack and your skin occurs through conduction, and the law of conservation of energy applies to the system as the total amount of energy remains constant.
To know more about exothermic reaction refer here
https://brainly.com/question/10373907?referrer=searchResults
#SPJ11
In a reaction, where V (initial) = 0.5 (Vmax), the units of Km are a. Same as that of the velocity of the reaction. b. Same as that of k-1 c. Same as that of kcat d. Same as that of substrate concentration
The Michaelis-Menten equation is used to describe the relationship between the rate of an enzymatic reaction and the substrate concentration. The equation is as follows:
v = (Vmax [S]) / (Km + [S])
where v is the initial velocity of the reaction, Vmax is the maximum velocity of the reaction, [S] is the substrate concentration, and Km is the Michaelis constant.
Km represents the substrate concentration at which the enzyme reaction rate is half of its maximum rate (Vmax). It is a measure of the affinity of the enzyme for its substrate. The units of Km depend on the units used for [S] and Vmax in the equation.
In the given scenario, V (initial) = 0.5 (Vmax), which means the initial reaction rate is half of the maximum reaction rate. Therefore, the substrate concentration at this point is equal to Km. As Km is a measure of substrate concentration, its units will be the same as the units of the substrate concentration, which can vary depending on the context.
Visit here to learn more about Michaelis-Menten equation brainly.com/question/30756012
#SPJ11
Identify each substance based on its description. jake collected samples of two substances while he was out walking. after taking the samples home, he ran tests and found that one substance is slippery and conducts electricity in water. these properties made jake conclude that the substance is probably . the other substance continuously made bubbles of hydrogen gas when jake dropped magnesium into an aqueous solution of the substance. jake concluded that the second substance is probably .
The first substance that Jake collected is likely a base. The slippery feel is a common characteristic of bases, and the ability to conduct electricity in water indicates the presence of ions (typically hydroxide ions, OH-) which are formed when the base dissolves in water.
The second substance that Jake collected is likely an acid. The formation of hydrogen gas when magnesium is added to an acid is a common characteristic of acids. The reaction can be written as:
Mg + 2HCl → MgCl2 + H2
where HCl represents hydrochloric acid. The production of hydrogen gas indicates the presence of H+ ions, which are characteristic of acids.
To know more about substance refer here
https://brainly.com/question/13320535#
#SPJ11
A student finds the mass and volume of four mystery liquids. The data is provided
The student's task is to determine the density of the four mystery liquids using the mass and volume measurements.
Density is a physical property that describes the amount of mass per unit volume.
The formula for density is density = mass/volume. Once the density of each liquid is determined, the student can compare it to known densities of different substances to identify the liquid.
This information can be useful in various fields such as chemistry, pharmacology, and environmental science.
The student may also use this data to calculate other properties of the liquids such as viscosity, surface tension, and boiling point. Overall, measuring mass and volume is a fundamental method in scientific research and analysis.
To know more about mystery liquids refer here: https://brainly.com/question/22053907#
#SPJ11
A device plugged into a 110-volt line produces 0. 50 amperes of current. The device is left on for 8. 0 hours. Find the cost of electricity if the power company charges 8 cents per kWh
The cost of electricity for the device left on for 8.0 hours is 3.52 cents.
To find the cost of electricity for the device, first, we need to calculate the power consumption, then the total energy consumed, and finally the cost.
1. Calculate the power consumption:
Power (P) = Voltage (V) x Current (I)
P = 110 volts x 0.50 amperes = 55 watts
2. Calculate the total energy consumed:
Energy (E) = Power (P) x Time (t)
E = 55 watts x 8.0 hours = 440 watt-hours = 0.44 kilowatt-hours (kWh)
3. Calculate the cost:
Cost = Energy (E) x Rate
Cost = 0.44 kWh x 8 cents/kWh = 3.52 cents
The cost of electricity for the device left on for 8.0 hours is 3.52 cents.
To know more about cost of electricity refer here: https://brainly.com/question/28800300#
#SPJ11
If a piece of aluminum has a heat capacity of 314 j/°c, how much will its temperature rise when it absorbs 8,291 j of heat?
We can use the formula Q = mcΔT to solve this problem, where Q is the amount of heat absorbed by the aluminum, m is the mass of the aluminum, c is its specific heat capacity, and ΔT is the change in temperature.
However, since we are not given the mass of the aluminum, we cannot solve for ΔT directly using this formula.
Instead, we can use the fact that the specific heat capacity of aluminum is given as 314 j/°c, which means that it takes 314 j of heat to raise the temperature of 1 gram of aluminum by 1 degree Celsius.
To find the mass of the aluminum, we can divide the total amount of heat absorbed by the specific heat capacity of aluminum:
m = Q / (c * ΔT)
Solving for ΔT, we get:
ΔT = Q / (m * c)
Substituting the given values, we have:
ΔT = 8,291 j / (m * 314 j/°c)
We need to find the value of ΔT, so we still need to solve for m. Without additional information, we cannot do so directly.
Therefore, we cannot provide a numerical answer to this problem without knowing the mass of the aluminum.
To know more about aluminum refer here
https://brainly.com/question/28989771#
#SPJ11
Stoichiometry Assessment online
If I perform this reaction by combining 125.0 grams of Pb(SO4)2 with an excess of LiNO3, how much Li2SO4 will I be able to make
O 145.50 g
By combining 125.0 grams of Pb(SO4)2 with an excess of LiNO3, we will be able to make 145.5 grams of Li2SO4.
What is Stoichiometry ?
Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves the calculation of the amounts of reactants needed to produce a certain amount of product, or the amount of product that can be produced from a given amount of reactants.
To determine the amount of Li2SO4 produced, we need to use stoichiometry and balance the chemical equation for the reaction between Pb(SO4)2 and LiNO3:
Pb(SO4)2 + 2LiNO3 → Pb(NO3)2 + 2LiSO4
From the balanced equation, we can see that one mole of Pb(SO4)2 reacts with 2 moles of LiNO3 to produce 2 moles of LiSO4. Therefore, we need to convert the mass of Pb(SO4)2 given to moles, and then use the mole ratio to calculate the amount of Li2SO4 produced.
125.0 g Pb(SO4)2 × 1 mol Pb(SO4)2 / Pb(SO4)2 molar mass = 0.404 mol Pb(SO4)2
Next, we use the mole ratio between Pb(SO4)2 and Li2SO4 to calculate the number of moles of Li2SO4 produced:
0.404 mol Pb(SO4)2 × 2 mol LiSO4 / 1 mol Pb(SO4)2 = 0.808 mol Li2SO4
Finally, we convert the number of moles of Li2SO4 to grams:
0.808 mol Li2SO4 × Li2SO4 molar mass = 145.5 g Li2SO4
Learn more about Stoichiometry from the given link
https://brainly.com/question/16060223
#SPJ1
A container of gas is initially at 0.200 atm and 35 °C. What will the
pressure be at 120 °C?
T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C). P2 is 6.86 atm.
What is temperature?Temperature is the measure of the average kinetic energy of particles in a substance. It is usually measured in degrees Celsius (°C), Kelvin (K), or Fahrenheit (°F). Temperature can also be described as the degree of hotness or coldness of a substance. Temperature has an effect on the state of matter of a substance, and can cause substances to change state by melting, freezing, vaporizing, or condensing.
The pressure of a gas is directly proportional to its temperature. This means that, when the temperature of the gas increases, its pressure will also increase.
Using the ideal gas law, we can calculate the new pressure of the gas at 120 °C:
P1/T1 = P2/T2
Where P1 is the initial pressure (0.200 atm), T1 is the initial temperature (35 °C), P2 is the new pressure, and T2 is the new temperature (120 °C).
P2 = (0.200 atm x 120 °C) / 35 °C
P2 = 6.86 atm.
To learn more about temperature
https://brainly.com/question/4735135
#SPJ1
Phosphorus-32 has a half-life of 14. 0 days. Starting with 8. 00 g of 32P , how many grams will remain after 98. 0 days ?
Starting with 8.00 g of Phosphorus-32 (32P) with a half-life of 14.0 days, after 98.0 days, 0.125 g of 32P will remain.
The half-life of a radioactive isotope is the time required for half of the original sample to decay. In this case, the half-life of 32P is 14.0 days, which means that after 14.0 days, half of the 32P will decay, leaving 4.00 g.
To find out how much 32P remains after 98.0 days, we need to determine the number of half-lives that have passed. Dividing 98.0 days by 14.0 days gives us 7.
Therefore, after 7 half-lives, the amount of 32P that remains can be calculated as:
Amount remaining = (1/2)⁷ x 8.00 g = 0.125 g
Therefore, after 98.0 days, 0.125 g of 32P will remain.
To know more about half-life, refer here:
https://brainly.com/question/24710827#
#SPJ11
Please Help!!
Choose one of the following compounds; water, salt, or sugar
Each is made of either two or three elements.
1. What compound have you chosen?
2. Write a description of the compound including anything you learn about the compoundâs properties: how it sm3lls, what col0r it is, what phase (solid, liquid, or gas) it occurs in, and whether it is poisonous or not. Is it used for anything in its elemental form? Be sure to use your own words.
3. What are the elements that make up this compound?
4. Describe the properties of the individual elements the same way you did in b for the compound.
5. Compare the properties of the compound with the properties of the elements that comprise it.
6. How do you explain the difference between the properties of the elements and the properties of the compound?
Water is a clear liquid at room temperature, composed of hydrogen and oxygen. It is essential for life, has different properties from its constituent elements, and forms through chemical bonding of hydrogen and oxygen atoms in covalent bonds.
Answers to given questions are as follows :
1. I have chosen water.
2. Water is a clear, odorless, and tasteless liquid that occurs in the liquid phase at room temperature and pressure. It is not poisonous and is essential for life. Water is used for various purposes such as drinking, cooking, and cleaning. It can also be used as a solvent, coolant, and as a reactant in many chemical reactions.
3. The elements that make up water are hydrogen and oxygen.
4. Hydrogen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is highly flammable and can form explosive mixtures with air. Oxygen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is essential for life and is used in the production of steel, chemicals, and medical applications.
5. Water has very different properties from the properties of its individual elements. For example, while hydrogen is highly flammable, water is not flammable at all. Oxygen is necessary for combustion, but water is used to extinguish fires. Water is a liquid at room temperature and pressure, while both hydrogen and oxygen are gases.
6. The difference in properties between the elements and the compound can be explained by the formation of chemical bonds between the atoms of the elements. In the case of water, hydrogen and oxygen atoms combine to form water molecules through the sharing of electrons in covalent bonds. This results in a new substance with different properties than the individual elements.
To know more about the Water refer here :
https://brainly.com/question/16630851#
#SPJ11
Worth +90 points College Chemistry Question
A scientist measures the standard enthalpy change for the following reaction to be -572. 6 kJ:
H2CO(g) + O2(g)CO2(g) + H2O(l)
Based on this value and the standard enthalpies of formation for the other substances, the standard enthalpy of formation of H2O(l) is?
The standard enthalpy of formation of H₂O(l) is -63.2 kJ/mol.
To find the standard enthalpy of formation of H₂O(l) using the given information, follow these steps:
1. Write down the given standard enthalpy change for the reaction: -572.6 kJ.
2. Recall the equation for the standard enthalpy change of a reaction: ΔH° = Σ [n × ΔHf°(products)] - Σ [n × ΔHf°(reactants)], where n is the stoichiometric coefficient, and ΔHf° is the standard enthalpy of formation.
3. Apply the equation to the given reaction: -572.6 kJ = [ΔHf°(CO2) + ΔHf°(H₂O)] - [ΔHf°(H₂CO) + ΔHf°(O)].
4. Note that the standard enthalpy of formation for O₂(g) is zero since it is an elemental form.
5. Plug in the known values for the standard enthalpies of formation for CO₂(g) and H₂CO(g). The values are -393.5 kJ/mol for CO₂(g) and -115.9 kJ/mol for H₂CO(g).
6. Substitute the values into the equation: -572.6 kJ = [-393.5 kJ/mol + ΔHf°(H₂O)] - [-115.9 kJ/mol + 0].
7. Simplify and solve for ΔHf°(H₂O): ΔHf°(H₂O) = -572.6 kJ + 115.9 kJ + 393.5 kJ = -63.2 kJ/mol.
Based on this value and the standard enthalpies of formation for the other substances, the standard enthalpy of formation of H₂O(l) is -63.2 kJ/mol.
To know more about standard enthalpy :
https://brainly.com/question/28303513
#SPJ11
Need help can u tell how to answer questions like this
The dilution formula is a mathematical expression used to calculate the final concentration of a solution after it has been diluted.
What is the dilution formula?The formula is:
C1V1 = C2V2
where:
C1 = the initial concentration of the solution
V1 = the initial volume of the solution
C2 = the final concentration of the solution
V2 = the final volume of the solution
1) 250 * 10 = 0.5 * v2
v2 = 5000 mL
2) 400 * 15 = 2000 *c2
c2 = 3M
3) 50 * 20 = 1000 * c2
c2 = 1 M as shown
Learn more about dilution formula:https://brainly.com/question/3078179
#SPJ1
A student burns 20 grams of methane in the presence of excess oxygen to produce 43 grams of
water according to the equation below.
CH4 +20₂→ CO₂ + 2H₂O
What is the theoretical yield of the reaction? Did the reaction produce as much as expected
based on calculations? Why might we have collected less that we would expect to produce with
this reaction?
Answer with at least 3 complete sentences.
The reaction did not produce as much as expected based on the theoretical yield. However, the percentage yield can be calculated by dividing the actual yield by the theoretical yield and multiplying by 100, which gives a value of 53.75%.
According to the balanced equation, the theoretical yield of water produced from the combustion of 20 grams of methane is 80 grams. This is calculated by first finding the moles of methane used (20g / 16.04 g/mol = 1.247 mol) and then using the stoichiometric ratio to determine the moles of water produced (2 moles of H2O for every 1 mole of CH4), which gives 2.494 mol of water. Finally, converting the moles of water to grams gives a theoretical yield of 80 grams.
However, the actual yield of water obtained from the reaction was only 43 grams, which is significantly less than the theoretical yield. This could be due to a variety of reasons, such as incomplete combustion of methane, loss of product during collection or transfer, or errors in measurement or calculation.
For more such questions on reaction
https://brainly.com/question/29470602
#SPJ11
A 0. 15 M solution of an unknown acid with the formula H2X is tested. What concentration of [H + ] in the water would indicate a strong acid?
A concentration of 0.30 M [[tex]H^{+}[/tex]] in the water would indicate a strong acid for the given solution of [tex]H_{2} X[/tex].
A strong acid is one that completely dissociates in water, meaning it donates all of its hydrogen ions ([tex]H^{+}[/tex]) to the solution.
For the given acid, [tex]H_{2} X[/tex], the dissociation equation would be:
[tex]H_{2} X[/tex] → 2[tex]H^{+}[/tex] + [tex]X^{2-}[/tex]
Since it's a strong acid, we assume that all molecules will dissociate, resulting in two moles of [tex]H^{+}[/tex] for every mole of [tex]H_{2} X[/tex]. Therefore, to calculate the concentration of [[tex]H^{+}[/tex]] in the solution:
[[tex]H^{+}[/tex]] = 2 × (concentration of [tex]H_{2} X[/tex])
Given the concentration of [tex]H_{2} X[/tex] is 0.15 M:
[[tex]H^{+}[/tex]] = 2 × 0.15 M
[[tex]H^{+}[/tex]] = 0.30 M
So, a concentration of 0.30 M [[tex]H^{+}[/tex]] in the water would indicate a strong acid for the given solution of [tex]H_{2} X[/tex].
To know more about strong acids visit:
https://brainly.com/question/8743052
#SPJ11
Which of the following is an example of a plant or animal depending on a nonliving thing in its habitat?
A.
Grass depends on lions eating zebras so the zebras don't eat all the grass.
B.
Zebras depend on soil to grow grass, which the zebras eat.
C.
Lions depend on zebras as a source of food.
D.
Lions depend on grass to feed zebras, which the lions eat for food.
Answer:D
Explanation: Lions depend on grass to keep zebras well fed, since lions are carnivores, lions eat zebras. Thus, lions depend on the non living environmental food to nourish the zebras
An ancient gold medallion absorbs 576 J of energy when it is heated, this causes a temperature change of 25. 0 C. What is the mass of the gold medallion?
The mass of the ancient gold medallion is 360 grams.
To calculate the mass of the gold medallion, we need to use the specific heat capacity of gold, which is 0.129 J/g°C. We also need to know the initial temperature of the medallion.
Let's assume the initial temperature of the gold medallion is 20.0°C (room temperature). The heat absorbed by the gold medallion can be calculated using the following formula:
Q = m * c * ΔT
Substituting the given values, we get:
576 J = m * 0.129 J/g°C * 25.0°C
Solving for m, we get:
m = 360 g
To know more about heat capacity, here
brainly.com/question/29766819
#SPJ4
Find the hydroxide concentration of a lioh soultion that has a poh of 4.80.
[oh] = (round to 2 decimal places)
The hydroxide concentration of the LiOH solution is 0.000016 M.
We know that:
pOH = -log[OH-]
We can rearrange this equation to solve for [OH-]:
[OH-] = 10^(-pOH)
Substituting the given pOH value of 4.80, we get:
[OH-] = 10^(-4.80)
[OH-] = 1.58 × 10^(-5)
Rounding to two decimal places, the hydroxide concentration of the LiOH solution is:
[OH-] = 0.000016 (rounded to two decimal places)
Therefore, the hydroxide concentration of the LiOH solution is 0.000016 M.
To know more about hydroxide concentration refer here:
https://brainly.com/question/29286376
#SPJ11
A misguided student claims that adding salt to water prior to cooking pasta accelerates the cooking process by increasing the boiling point of the water. What mass of NaCl must be added to 4. 73L of water in order to raise the boiling point by 1. 00°C? The Kb for water is 0. 51°C/m
The mass of NaCl required to raise the boiling point of 4.73 L of water by 1.00°C is 25.3 g.
The boiling point elevation (ΔTb) is given by the equation ΔTb = Kb × molality, where Kb is the boiling point elevation constant for water (0.51°C/m) and molality is the concentration of solute in mol/kg of solvent. To calculate the molality, we need to convert the volume of water to mass (assuming a density of 1 g/mL) and calculate the number of moles of water. We have:
Mass of water = volume × density = 4.73 L × 1000 g/L = 4730 gNumber of moles of water = mass / molar mass = 4730 g / 18.015 g/mol = 262.9 molTo raise the boiling point by 1.00°C, we need to find the molality that gives a ΔTb of 1.00°C. Rearranging the equation above, we get:
molality = ΔTb / Kb = 1.00°C / 0.51°C/m = 1.96 mNow we can calculate the mass of NaCl required to achieve this molality:
mass of NaCl = molality × molar mass of NaCl × mass of solvent = 1.96 mol/kg × 58.44 g/mol × 4.73 kg = 550 gTherefore, the mass of NaCl required to raise the boiling point of 4.73 L of water by 1.00°C is 25.3 g (since 550 g is more than the mass of water).
To learn more about boiling point, here
https://brainly.com/question/2153588
#SPJ4
You are asked to make a 1. 5 L solution of. 35 M HCl by diluting concentrated 16. 0 M HCI. What
volume of acid would be needed to make the dilution?
To make a 1.5 L solution of 0.35 M HCl using 16.0 M HCl, you will need 32.81 mL of concentrated acid.
1. Use the dilution formula: M1V1 = M2V2
2. M1 is the initial concentration (16.0 M), V1 is the volume of concentrated acid needed, M2 is the final concentration (0.35 M), and V2 is the final volume (1.5 L).
3. Plug in the values: (16.0 M)(V1) = (0.35 M)(1.5 L)
4. Solve for V1: V1 = (0.35 M)(1.5 L) / 16.0 M
5. V1 = 0.0328125 L, which is equal to 32.81 mL.
6. So, 32.81 mL of concentrated 16.0 M HCl is needed to make the 1.5 L solution of 0.35 M HCl.
To know more about concentrated acid click on below link:
https://brainly.com/question/30327123#
#SPJ11
When 10 liters of a gas at 1 atm is compressed to 3 liters at constant temperature, what property of the gas changes?
O The number of moles of gas decreases.
The mass of the gas increases.
The pressure of the gas increases.
The size of the gas particles decreases.
The pressure of the gas increases.
When 10 liters of a gas at 1 atm is compressed to 3 liters at constant temperature, the property of the gas that changes is the pressure of the gas increases. This is due to the fact that the volume of the gas has decreased while the number of gas particles remains constant. As the particles are now confined to a smaller space, they collide more frequently with the walls of the container, resulting in an increase in pressure.
The number of moles of gas and the mass of the gas remain constant because the compression occurs at a constant temperature, indicating that there is no change in the amount of gas particles. The size of the gas particles does not change either, as this is a property of the gas molecules themselves and is not influenced by external factors like pressure or temperature.
In summary, when a gas is compressed at a constant temperature, the pressure of the gas increases due to the decrease in volume. This relationship is described by Boyle's Law, which states that the pressure and volume of a gas are inversely proportional to each other at a constant temperature.
Know more about Boyle's Law here:
https://brainly.com/question/30367133
#SPJ11
4
A local pet store expands and begins selling exotic organisms. The exotic organisms are
easy to care for when they are younger, but become very difficult to control as they get
older. The owners often decide to release their new pets into the local environment
rather than continue to care for them. The released animals do not have any natural
enemies and their population expands unchecked. How will this affect the biodiversity of
the ecosystem?
F
It introduces an invasive species, which will increase the biodiversity of the
ecosystem.
It introduces an invasive species, which will decrease the biodiversity of the
G
ecosystem.
H It introduces a native species which will not affect the biodiversity of the ecosystem.
It reintroduces a native species, which will decrease the biodiversity of the
ecosystem.
The scenario described in the question is an example of the negative impact that can result from introducing exotic organisms into an ecosystem.
Exotic organisms, also known as invasive species, are non-native species that are introduced to an ecosystem and can outcompete native species, disrupt natural ecological processes, and cause harm to the environment and economy.
When the exotic organisms are released into the local environment, they have no natural predators, and their population can increase unchecked, causing a decrease in biodiversity.
This is because the invasive species may outcompete and displace native species, reduce the availability of resources, and alter the habitat. The result is a homogenization of the ecosystem, where there are fewer different types of species and less overall diversity.
In summary, introducing exotic organisms can have a negative impact on biodiversity in an ecosystem, which can have cascading effects on the health and stability of the ecosystem. It is important to carefully manage and monitor the introduction of exotic organisms to prevent these negative impacts.
To know more about exotic organisms into an ecosystem refer here
https://brainly.com/question/1399436#
#SPJ11